Thank you for purchasing this JVC product.
Before use, please read the Safety Precautions and Cautions on P.2 and P.25 to ensure safe
use of this product.
This product comes with a “Basic User Guide” (this manual) and a “Detailed User Guide”.
Explains the ways of shooting in various situations and the
Detailed User Guide
.
useful features.
■
Access the following website on your PC
http://manual.jvc.co.jp/index.html/
Further
Information
Safety Precautions
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.
CAUTIONS:
If you notice smoke or a peculiar smell coming
•
from the camcorder or AC Adapter, shut it down
and unplug it immediately. Continue using the
camcorder or AC Adapter under these conditions
could lead to fi re or electric shock. Contact
your JVC dealer. Do not attempt to repair themalfunction yourself.
To prevent shock, do not open the cabinet. No
•
user serviceable parts inside. Refer servicing to
qualifi ed personnel.
When you are not using the AC adapter for a
•
long period of time, it is recommended that you
disconnect the power cord from AC outlet.
In certain areas, use the conversion plug
•
depending on the type of your AC wall outlet.
NOTES:
The rating plate and safety caution are on the
•
bottom and/or the back of the main unit.
The serial number plate is on the battery pack mount.
•
The rating information and safety caution of the
•
AC adapter are on its upper and lower sides.
WARNING:
The battery pack, the camcorder with battery
installed, and the remote control with battery
installed should not be exposed to excessive heat
such as direct sunshine, fi re or the like.
.
Caution on Replaceable lithium battery
The battery used in this device may present a fi re
or chemical burn hazard if mistreated.
Do not recharge, disassemble, heat above 100°C
or incinerate.
Danger of explosion or Risk of fi re if the battery isincorrectly replaced.
Dispose of used battery promptly.
•
Keep away from children.
•
Do not disassemble and do not dispose of in fi re.
•
When the equipment is installed in a cabinet or on
a shelf, make sure that it has suffi cient space on all
sides to allow for ventilation (10 cm or more on both
sides, on top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a newspaper,
or cloth etc. the heat may not be able to get out.)
No naked fl ame sources, such as lighted candles,
should be placed on the apparatus.
When discarding batteries, environmental problems must
be considered and the local rules or laws governing the
disposal of these batteries must be followed strictly.
The apparatus shall not be exposed to dripping or
splashing.
Do not use this equipment in a bathroom or places
with water.
Also do not place any containers fi lled with water
or liquids (such as cosmetics or medicines, fl ower
vases, potted plants, cups etc.) on top of this unit.
(If water or liquid is allowed to enter this equipment,
fi re or electric shock may be caused.)
CAUTION:
The mains plug shall remain readily operable.
Remove the mains plug immediately if the
•
camcorder functions abnormally.
CAUTION:
To avoid electricshock
or damage to the unit,
fi rst fi rmly insert the
small end of the power
cord into the AC Adapter
until it is no longer
wobbly, and then plug the larger end of the power cord
into an AC outlet.
.
.
For more information, refer to the Detailed User Guide
2
http://manual.jvc.co.jp/index.html/
Do not point the lens directly into the sun. This can cause
eye injuries, as well as lead to the malfunctioning of internal
circuitry. There is also a risk of fi re or electric shock.
CAUTION!
The following notes concern possible physical damage
to the camcorder and to the user.
Carrying or holding the camcorder by the LCD monitor
can result in dropping the unit, or in a malfunction.
Do not use a tripod on unsteady or unlevel surfaces. It
could tip over, causing serious damage to the camcorder.
CAUTION!
Connecting cables (Audio/Video, etc.)
camcorder and leaving it on top of the TV is not
recommended, as tripping on the cables will cause
the camcorder to fall, resulting in damage.
If thissymbol is shown, it is only validin the European Union.
.
to the
Remember that this camcorder is intended for
private consumer use only.
Any commercial use without proper permission
isprohibited. (Even if you record an event such
as a show, performance or exhibition for personal
enjoyment, it is strongly recommended that you
obtain permission beforehand.)
Trademarks
Manufactured under license from Dolby
•
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Windows® is either registered trademark or
•
trademark of Microsoft Corporation in the United
States and/or other countries.
Macintosh is a registered trademark of Apple Inc.
•
iTunes, iMovie, iPhoto are trademarks of Apple
•
Inc., registered in the U.S. and other countries.
YouTube and the YouTube logo are trademarks
•
and/or registered trademarks of YouTube LLC.
Other product and company names included in
•
this instruction manual are trademarks and/or
registered trademarks of their respective holders.
For more information, refer to the Detailed User Guide
http://manual.jvc.co.jp/index.html/
3
Index
Safety Precautions ............................ 2
Index ................................................. 4
Use the “Detailed User Guide” on your PC to find out more about the advanced
operations.
Access the following address on your PC
■
http://manual.jvc.co.jp/index.html/
Verifying the Accessories
AC Adapter
AP-V30M *1
.
AV CableCD-ROM *2Basic User Guide
.
●
microSD cards are sold separately.
For details on the types of cards that can be used on this unit, refer to P.12.
When using the AC adapter overseas, please prepare a commercially available
*1
converter plug for the country or region of visit.
To view the Detailed User Guide, connect to the internet and click “Read
*2
Detailed User Guide”.
Power Cord *1Battery Pack
BN-VG107E
.
.
.
(this manual)
.
(Type A - Mini Type B)
.
USB Cable
For more information, refer to the Detailed User Guide
4
http://manual.jvc.co.jp/index.html/
Names of Parts and Functions
g
1
2
3
4
5
.
678
90a
A
V
h
i
j
k
b
c
d
e
f
l
m
n
o
p
q
A
Lens/Lens Cover
B
Light
C
Stereo Microphone
D
LCD Monitor
Turns the power on/off by opening and
closing.
E
Slider
Selects an image or item.
F
OK Button
Confirms the selected image or item.
G
Operation Buttons
Functions differently according to the
operation.
H
Menu (menu) Button ( P.21)
I
Speaker
J
ACCESS (Access) Lamp
Lights up/blinks during recording or
playback.
O
, (Power/Information) Button
Recording:Displays the remaining time as
well as the battery power
during continuous recording.
Playback:Displays file information.
Press and hold to turn the power on/off
while the LCD monitor is opened.
P
AV Terminal ( P.15, P.20)
Q
Zoom/Volume Lever ( P.10, P.14)
R
SNAPSHOT (Still Image Recording)
Button ( P.11)
S
USB Terminal
T
DC Terminal ( P.6)
U
START/STOP (Video Recording)
Button ( P.10)
V
Lens Cover Switch ( P.10)
W
Grip Belt Release Lever
X
Grip Belt ( P.7)
K
POWER/CHARGE (Power/Charge)
Lamp ( P.6)
L
+ (Play) Button
Switches between recording and
playback modes.
M
/ (Video/Still Image) Button
Switches between video and still
image modes.
N
UPLOAD/EXPORT
(Upload/Export to iTunes) Button
Recording:Takes videos in YouTube or
iTunes format.
Playback:Changes the video to
YouTube or iTunes* format.
Y
Tripod Mounting Hole
Z
microSD Card Slot ( P.12)
a
Battery Release Lever ( P.6)
For more information, refer to the Detailed User Guide
http://manual.jvc.co.jp/index.html/
5
Getting Started
Charging the Battery Pack
Attach the battery pack.
1
The battery pack is not
*
charged at the time of
purchase.
Align the top of the battery
•
with the mark on this unit,
and slide in until the battery
clicks into place.
To detach the battery pack
■
(Base)
.
Charging Lamp
Plug in the power.
3
Charging Lamp
Connect the DC
2
terminal.
Charging in progress:
Blinks
Charging finished:
Goes out
Cover
AC Adapter
To AC Outlet
(110V to 240V)
CAUTION
Be sure to use JVC battery packs.
●
If you use any other battery packs besides JVC battery packs, safety and
performance cannot be guaranteed.
●
Charging time: Approx. 1 h 50 m (using supplied battery pack)
* If the battery pack is charged outside the room temperature range of 10°C to
35°C, charging may take a longer time or it may not start.
For more information, refer to the Detailed User Guide
6
http://manual.jvc.co.jp/index.html/
Grip Adjustment
Getting StartedRecordingPlaybackCopying
Pull back the belt
1
.
Adjust the length
2
Using as a Hand Strap
Remove the strap and loop it around your wrist.
While pressing A, pull B and remove the strap.
Press and hold
.
●
When attaching the hand strap, insert C until it clicks into place.
Attach the belt
3
For more information, refer to the Detailed User Guide
http://manual.jvc.co.jp/index.html/
Further
Information
7
Clock Setting
Open the LCD monitor.
1
A
V
.
●
The unit turns on. When the LCD
monitor is closed, the unit turns off.
Select “YES” and touch when
2
“SET DATE/TIME!” is displayed.
Select
.
●
Slide along the slider to select, then
touch the operation buttons to set.
Set the date and time.
3
Touch
Cursor
Slider
SET DATE/TIME!
YES
SET
NO
Operation Buttons
Select the region where you live
5
and touch .
●
The city name and time difference is
displayed.
CLOCK/AREA SETTING
GMT
.
SAVE
1. 1. 2009 10:00
QUIT
NOTE
●
Touch the slider and buttons
around the screen with your
fingers.
●
The slider and buttons do not
function if you touch them with
your fingernails or with gloves
on.
●
The displays on the screen do
not work even if you touch them.
●
“SET DATE/TIME!” is displayed
when you turn on this unit after it
has not been used for a
prolonged period.
Charge this unit for more than 24
hours before setting the clock.
( P.6)
CLOCK SETTING
DATETIME
SETQUIT
.
●
Use the slider to adjust the year,
month, day, hour and minute.
●
Touch the operation buttons “&” /
“'” to move the cursor.
After setting the date and time,
4
touch .
For more information, refer to the Detailed User Guide
8
http://manual.jvc.co.jp/index.html/
1000200911
To reset the clock
■
Set the clock with “CLOCK ADJUST”
from the menu.
① Display the menu.
Tou ch
.
② Select “CLOCK ADJUST” and
touch .
VIDEO
DISPLAY SETTINGS
CLOCK ADJUST
BASIC SETTINGS
CONNECTION SETTINGS
MEDIA SETTINGS
.
SET
③ Select “CLOCK SETTING” and
touch .
CLOCK ADJUST
CLOCK SETTING
AREA SETTING
SET FOR DAYLIGHT SAVING TIME
.
●
The subsequent setting operations
are the same as steps 3 - 5 on the
previous page.
SETQUIT
QUIT
?
?
To change the display
■
language
The language on the display can be
changed.
① Display the menu.
Touch
.
② Select “DISPLAY SETTINGS”
and touch .
VIDEO
#76159+6%*4'%/'&+#
DISPLAY SETTINGS
CLOCK ADJUST
BASIC SETTINGS
CONNECTION SETTINGS
?
.
SET
③ Select “LANGUAGE” and touch
.
DISPLAY SETTINGS
LANGUAGE
DATE DISPLAY STYLE
MONITOR BRIGHTNESS
LCD BACKLIGHT
.
SETQUIT
④ Select the desired language and
touch .
QUIT
?
Getting StartedRecordingPlaybackCopying
⑤
Touch .
For more information, refer to the Detailed User Guide
http://manual.jvc.co.jp/index.html/
Further
Information
9
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.