Page 1
INSTRUCTIONS
HARD DISK CAMCORDER
EN
GZ-MG680
GZ-MG630
AA
AA
Dear Customers
Thank you for purchasing this camcorder.
Before use, please read the safety
information and precautions contained
in pages 6 and 7 to ensure safe use of
this product.
ENGLISH
Page 2
Easy Start Guide
Charge the battery before recording
Turn off the camcorder and attach the battery pack.
Access lamp
blinks: Accessing fi les
Do not remove the
AC adapter, the
battery pack or the
microSD card when
the lamp is blinking.
Battery Pack
AC Adapter
To AC Outlet
(110V to 240V)
CAUTION
Be sure to use JVC battery packs. If you use any other battery packs besides
•
JVC battery packs, safety and performance can not be guaranteed.
Power/charge lamp
blinks: Charging
goes out: Charging fi nished
Open the cover
The battery pack is not
charged at the time of
purchase.
Grip Adjustment
Adjust the strap and fasten.
Fasten the strap when you grip the
•
camcorder.
When carrying the camcorder,
•
please be careful not to drop it.
2
EN
Grip Strap
Fasten
Page 3
Date/Time Setting
Open the LCD monitor to
Q
turn on the camcorder
Power button
Select the city closest to
T
the area where you use
the camcorder
LCD monitor
Select [YES] within
R
10 seconds
Slide your fi nger up and down on the
sensor. Then touch OK.
When the message disappears, press the
•
power button for at least 2 seconds to turn
off the power, and then press it again for at
least 2 seconds.
Touch the sensors with your fi nger. The
•
sensors do not function if you touch them
with your fi nger nail or with gloves on.
Select [CLOCK SETTING]
S
Select [ON] if daylight
U
saving time is effective
Set the date and time
V
Touch sensor: Sets the date and time
: Moves the cursor to the right
&
OK: Clock starts
3
EN
Page 4
Video recording
CAUTION
Before recording an important scene, it is recommended to conduct a trial
recording.
Slide the mode switch to select ! (video) mode
Q
Select recording mode
R
The mode changes when
you press the button.
The auto recording
indicator appears.
Start recording
S
Press the START/STOP
button to start recording,
and press it again to stop.
4
EN
Remaining space on
the hard disk
Video Quality
Record-standby
Recording
Page 5
Playing back
Select playback mode
Q
The mode changes when
you press the button.
Select the desired fi le
R
Select F (Touch OK)
S
Index screen
Playback screen
To perform operations such as forward search or reverse search (墌 p. 22)
䡵
To view fi les on TV (墌 p. 25)
䡵
CAUTION
Do not forget to make copies after recording!
To copy fi les onto DVD discs (墌 p. 27)
•
To dub fi les to a VCR/DVD recorder (墌 p. 34)
•
To play back a created disc (墌 p. 28)
•
To edit fi les on your computer (墌 p. 29)
•
5
EN
Page 6
Safety Precautions
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.
CAUTIONS:
If you notice smoke or a peculiar smell coming
•
from the camcorder or AC Adapter, shut it down
and unplug it immediately. Continue using the
camcorder or AC Adapter under these conditions
could lead to fi re or electric shock. Contact
your JVC dealer. Do not attempt to repair the
malfunction yourself.
To prevent shock, do not open the cabinet. No
•
user serviceable parts inside. Refer servicing to
qualifi ed personnel.
When you are not using the AC adapter for a
•
long period of time, it is recommended that you
disconnect the power cord from AC outlet.
In certain areas, use the conversion plug
•
depending on the type of your AC wall outlet..
NOTES:
The rating plate and safety caution are on the
•
bottom and/or the back of the main unit.
The serial number plate is on the battery pack
•
mount.
The rating information and safety caution of the
•
AC adapter are on its upper and lower sides.
WARNING:
The battery pack, the camcorder with battery
installed, and the remote control with battery
installed should not be exposed to excessive heat
such as direct sunshine, fi re or the Iike.
CAUTION:
The mains plug shall remain readily operable.
Caution on Replaceable lithium battery
The battery used in this device may present a fi re
or chemical burn hazard if mistreated.
Do not recharge, disassemble, heat above 100°C
or incinerate.
Replace battery with Panasonic, Sanyo, Sony or
Maxell CR2025.
Danger of explosion or Risk of fi re if the battery is
incorrectly replaced.
Dispose of used battery promptly.
•
Keep away from children.
•
Do not disassemble and do not dispose of in fi re.
•
When the equipment is installed in a cabinet or on
a shelf, make sure that it has suffi cient space on
all sides to allow for ventilation (10 cm or more on
both sides, on top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a
newspaper, or cloth etc. the heat may not be able
to get out.)
No naked fl ame sources, such as lighted candles,
should be placed on the apparatus.
When discarding batteries, environmental
problems must be considered and the local rules or
laws governing the disposal of these batteries must
be followed strictly.
The apparatus shall not be exposed to dripping or
splashing.
Do not use this equipment in a bathroom or places
with water.
Also do not place any containers fi lled with water
or liquids (such as cosmetics or medicines, fl ower
vases, potted plants, cups etc.) on top of this unit.
(If water or liquid is allowed to enter this
equipment, fi re or electric shock may be caused.)
CAUTION:
To avoid electric shock or
damage to the unit, fi rst
fi rmly inser t the small end
of the power cord into the
AC Adapter until it is no
longer wobbly, and then
plug the larger end of the power cord into an AC outlet.
6
EN
Page 7
Do not point the lens directly into the sun. This
can cause eye injuries, as well as lead to the
malfunctioning of internal circuitry. There is also a
risk of fi re or electric shock.
CAUTION!
The following notes concern possible physical
damage to the camcorder and to the user.
Carrying or holding the camcorder by the LCD
monitor can result in dropping the unit, or in a
malfunction.
Do not use a tripod on unsteady or unlevel
surfaces. It could tip over, causing serious damage
to the camcorder.
CAUTION!
Connecting cables (Audio/Video, S-Video, etc.) to
the camcorder and leaving it on top of the TV is not
recommended, as tripping on the cables will cause
the camcorder to fall, resulting in damage.
If this symbol is shown, it is only valid
in the European Union.
Remember that this camcorder is intended for
private consumer use only.
Any commercial use without proper permission
is prohibited. (Even if you record an event such
as a show, performance or exhibition for personal
enjoyment, it is strongly recommended that you
obtain permission beforehand.)
Trademarks
Manufactured under license from Dolby
•
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
HDMI is a trademark of HDMI
•
Licensing, LLC.
Windows® is either registered
•
trademark or trademark of Microsoft Corporation
in the United States and/or other countries.
Macintosh is a registered trademark of Apple
•
Inc.
iTunes is a trademark of Apple Inc., registered in
•
the U.S. and other countries.
YouTube and the YouTube logo are trademarks
•
and/or registered trademarks of YouTube LLC.
Other product and company names included in
•
this instruction manual are trademarks and/or
registered trademarks of their respective holders.
7
EN
Page 8
Contents
GETTING STARTED
Accessories ............................................10
Preparing the Remote Control ...................... 11
Attaching the Core Filter to the USB Cable ... 11
Index ........................................................12
Tripod Mounting ............................................ 13
Indications on LCD Monitor ...................14
Necessary Settings before Use .............16
Charging the Battery Pack ............................ 16
Date/Time Setting ......................................... 16
Language Setting ......................................... 17
Other Settings .........................................18
Using a microSD Card .................................. 18
RECORDING/PLAYBACK
Recording Files .......................................19
Video Recording ........................................... 19
Still Image Recording ................................... 20
Zooming ........................................................ 21
LED Light ...................................................... 21
Checking the Remaining Battery Power ....... 21
Checking the Remaining Space on the
Recording Media ......................................... 21
Playing Back Files ..................................22
Video Playback ............................................ 22
Still Image Playback ..................................... 23
Manual Recording ..................................24
Changing to Manual Recording Mode .......... 24
Backlight Compensation ............................... 24
Manual Setting in Menu ................................ 24
EDITING
Managing Files ........................................26
Capturing a Still Image from a Video ............ 26
Deleting Files ................................................ 26
COPYING
Copying Files ..........................................27
Using a DVD Burner ..................................... 27
Creating a DVD using a PC .......................... 29
Dubbing Files to a VCR/DVD Recorder ........ 34
Using with a Portable Media Player ......35
Turning on the Export Mode ......................... 35
Changing the Export Setting ........................ 35
Transferring the Files to PC .......................... 35
Uploading Files to Websites ..................36
Turning on the Upload Mode ........................ 36
Uploading Files ............................................. 36
FURTHER INFORMATION
Changing the Menu Settings .................37
Troubleshooting ......................................37
Warning Indications ...............................39
Specifi cations .........................................40
Cautions ..................................................42
Terms .......................................................44
USING WITH TV
Viewing Files on TV ................................25
Connection with TV....................................... 25
Playback Operation ...................................... 25
8
EN
Page 9
How to use the Touch Sensor
After the menu is displayed on the LCD monitor:
Q
Slide your fi nger up and down on the sensor.
R Select [SET]. (Touch OK.)
A
To select an on-screen button appearing on
the left side, touch the portion of the sensor
next to the on-screen button.
B
To select an on-screen button appearing at
the bottom of the screen, touch the buttons
underneath them.
Read these INSTRUCTIONS
to enjoy your CAMCORDER.
For more details on the
operations, refer to the
GUIDEBOOK in the supplied
CD-ROM.
In order to view the GUIDEBOOK, Adobe
®
Acrobat
ReaderTM or Adobe® Reader®
must be installed.
®
Adobe
Reader® can be loaded from
Adobe’s web site:
http://www.adobe.com/
NOTE
Select your desired language with a single click.
The model name is indicated on the bottom of your
camcorder.
®
Read This First!
Make a backup of important recorded data
It is recommended to copy your important
recorded data to a DVD or other recording
media for storage. JVC will not be responsible
for any lost data.
Make a trial recording
Before the actual recording of important data,
make a trial recording and play back the
recorded data to check that the video and
sound have been recorded correctly.
Reset the camcorder if it does not operate
correctly
Close the LCD monitor and remove the
power supply (battery pack or AC adapter)
from the camcorder, then reattach it.
Precautions on handling batteries
Be sure to use the JVC BN-VF808U/
•
VF815U/VF823U battery packs. This product
includes patented and other proprietary
technology and is made to be used with the
JVC battery and not with other batteries.
JVC cannot guarantee safety or
performance of this product when it is
operated by other batteries.
If the camcorder is subjected to electrostatic
•
discharge, turn off the power before using it
again.
If a malfunction occurs, stop using the
camcorder immediately and consult your
nearest JVC dealer
Recorded data may be erased while the
•
camcorder is being repaired or inspected.
Back up all data before requesting repairs or
inspections.
Because camcorders may be used
for demonstration in a shop, the
demonstration mode is set to on by default
To deactivate the demonstration mode, set
[DEMO MODE] to [OFF].
9
EN
Page 10
GETTING STARTED
Accessories
AP-V20M
AC Adapter Power Cord Battery Pack AV Cable
RM-V751U
USB Cable Remote Control Lithium Battery
Core Filter
NOTE
Make sure to use the provided cables for connections. Do not use any other cables.
BN-VF808U
CR2025
Pre-installed in the
remote control.
CD-ROM
10
EN
Page 11
Preparing the Remote Control
A battery is included inside the remote control at the time of purchase.
Remove the insulation sheet before use.
Beam Effective Area To Reinsert the Battery
Remote Sensor
Pull out the battery holder by pressing the lock
tab.
Lock Tab
Lithium Battery
(CR2025)
Effective distance:
Max. 5 m
NOTE
The transmitted beam may not be effective
or may cause incorrect operation when the
remote sensor is directly exposed to sunlight
or powerful lighting.
Attaching the Core Filter to the USB Cable
The core fi lter reduces interference caused when connecting to other devices. Connect the end of
the cable with the core fi lter to the camcorder.
Release the stopper. 3 cm Wind once.
To be connected to
the camcorder
11
EN
Page 12
Index
12
NOTE
Be careful not to cover 1, 2, 3, and 4
•
during shooting.
The LCD monitor can rotate 270°.
•
EN
Page 13
Camcorder
Remote Control
! Power Button
GZ-MG680
#
HDMI Mini Connector (墌 p. 25)
$ DISPLAY Button (墌 p. 15)
% Speaker
& Zoom Lever (墌 p. 21)
Speaker Volume Control
( SNAPSHOT Button (墌 p. 20)
) Touch Sensor
* OK Button
+ MENU Button
, Mode Switch [
!, #]
- UPLOAD Button (墌 p. 36)
TITLE Button
. EXPORT Button (墌 p. 35)
/ DIRECT DVD Button (墌 p. 28)
INFO Button (墌 p. 21)
0 PLAY/REC Button (墌 p. 19, 20, 22, 23)
1 LED Light (墌 p. 21)
2 Remote Sensor
3 Lens
4 Stereo Microphone
5 DC Connector
6 START/STOP Button (墌 p. 19)
7 AV Connector (墌 p. 25, 34)
8 USB Connector (墌 p. 27, 30)
9 Tripod Mounting Socket
: microSD Card Slot
; Battery Release Button
Q Infrared Beam Transmitting Window
R ZOOM (T/W) Buttons (Zoom in/Out)
S Up Button
T Skip Backward Button
U Left Button
V Back Button
W PLAYLIST Button
X START/STOP Button
Y S.SHOT(SNAPSHOT) Button
Z INFO Button
a Skip Forward Button
b PLAY/PAUSE/SET Button
c Right Button
d Next Button
e Down Button
f INDEX Button*
g DISP Button
* Each time you press INDEX, the screen
switches as shown below:
! mode:
Index Screen « Group Index Screen
# mode:
Index Screen « Date Index Screen
Tripod Mounting
Align the camcorder stud hole with the tripod
stud, and the mounting socket with the screw,
and then rotate the camcorder clockwise to
mount it to the tripod.
NOTE
Do not use a tripod on unsteady or unlevel
surfaces. It could tip over, causing serious
damage to the camcorder.
13
EN
Page 14
Indications on LCD Monitor
During both Video and Still Image
Recording
1. 11. 2009
! Selected Recording Mode Indicator
(墌 p. 24)
@: Auto Mode
3: Manual Mode
# Effect Mode Indicator
$ Tele Macro Mode Indicator
% LED Light Indicator (墌 p. 21)
& Scene Select Indicator
( Zoom Indicator (墌 p. 21)
) Recording Medium Indicator
* Drop Detection Indicator (Appears when
[DROP DETECTION] is set to [OFF].)
+ White Balance Indicator
, Monitor Backlight Indicator
- Battery Indicator
. Date/Time (墌 p. 16)
/ Manual Focus Adjustment Indicator
0 Backlight Compensation Indicator (墌 p. 24)
1 Brightness Control Indicator
.: Photometry Area Control Indicator
2 Shutter Speed
16:55
During Video Recording Only
! Mode Indicator
# EXPORT Mode Indicator (墌 p. 35)
$ Counter
% Upload Mode Indicator (墌 p. 36)
GZ-MG680
A:
& Video Quality: B (ULTRA FINE), C (FINE),
(NORMAL), E (ECONOMY)
D
( Remaining Time
)
REC: (Appears during recording.)
M
: (Appears during record-standby
MQ
mode.)
* Digital Image Stabilizer (DIS) Indicator
(Appears when [DIS] is set to [OFF].)
+ Shooting Indicator (墌 p. 19)
, Wind Cut Indicator
- Event Indicator
Analog Input Indicator
During Still Image Recording Only
14
! Mode Indicator
# Focus Indicator (墌 p. 20)
$ Image Quality:
(standard)
% Remaining Number of Shots
& Shooting Indicator (墌 p. 20)
( Shutter Mode Indicator
) Self-Timer Indicator
EN
(fi ne) or
STD
Page 15
During Video Playback
8
1. 11. 2009
! Mode Indicator
# Playlist Playback Indicator (Appears when
playing back a playlist.)
$ Quick Review Indicator (墌 p. 19)
% Video Quality: B (ULTRA FINE), C (FINE),
(NORMAL), E (ECONOMY)
D
& Counter
( Playback Mode
Playback
:
F
Pause
:
Q
Forward Search
:
K
Reverse Search
:
J
Forward Slow-Motion
:
QF
Reverse Slow-Motion
:
PQ
(The number on the left shows speed.)
) Battery Indicator
* Date/Time (墌 p. 16)
+ Volume Level Indicator
GZ-MG680
,
Output with 1080p
16:55
During Still Image Playback
1. 11. 2009
! Mode Indicator
# Quick Review Indicator (墌 p. 20)
$ Folder/File Number
% Slide Show Playback Indicator
& Battery Indicator
( Date/Time (墌 p. 16)
GZ-MG680
)
Switching indication modes on LCD
monitor
Each time you touch DISPLAY, indications
on LCD monitor switch as shown below:
Output with 1080p
16:55
In recording mode:
All indications/Indications for selected
functions
In playback mode:
All indications/Only date and time/No
indications
15
EN
Page 16
Necessary Settings before Use
To detach the battery pack
Charging the Battery Pack
1 Close the LCD monitor to turn off the
camcorder.
2 Attach the battery pack, then connect
the AC adapter.
AC Adapter
To AC Outlet
(110V to 240V)
The power/charge lamp blinks to
•
indicate charging has started.
When the lamp goes out, charging is
•
fi nished.
To check the remaining battery power
䡵
See page 21.
Battery pack Charging time
BN-VF808U
(Provided)
BN-VF815U 2 h 40 m
1 h 50 m
䡵
NOTE
You can also use the camcorder with just the
•
AC adapter.
The actual recording time may shorten
•
depending on the recording environment,
such as when recording scenes with fast
moving subject.
Please do not pull or bend the AC adapter
•
plug and cable. This may damage the AC
adapter.
Date/Time Setting
1 Open the LCD monitor to turn on the
camcorder.
2 Touch MENU.
3 Select [DISPLAY SETTINGS].
BN-VF823U 3 h 40 m
16
EN
4 Select [CLOCK ADJUST].
Page 17
5 Select [CLOCK SETTING].
6 Select the city closest to the area you
are traveling.
6 Select the city closest to the area
where you use the camcorder.
Selected area is highlighted
Principal city of the
selected area
Time difference to
GMT
7 Select [ON] if daylight saving time is
effective.
8 Set the date and time.
Change the setting by using the touch
sensor and select [
&
] to set.
9 Select [SAVE].
To reset the setting, select [QUIT].
Setting the clock to local time when
traveling
After performing steps 1-4 (墌 p. 16)
5 Select [AREA SETTING].
䡵
To return to the previous screen
Select @.
䡵
To quit the screen
Select [QUIT].
Language Setting
The language on the display can be changed.
1 Open the LCD monitor to turn on the
camcorder.
2 Touch MENU.
3 Select [DISPLAY SETTINGS].
4 Select [LANGUAGE].
5 Select the desired language.
To return to the previous screen
䡵
Select @.
To quit the screen
䡵
Select [QUIT].
17
EN
Page 18
Other Settings
Using a microSD Card
The camcorder is programmed to record on
the built-in hard disk when it is shipped from
the factory. You can change the recording
medium to microSD card.
Operations are confi rmed on the following
•
microSD cards.
- Panasonic
- TOSHIBA
- SanDisk
- ATP
Video recording:
Class 4 or higher compatible microSDHC
card (4 GB to 8 GB)
Still image recording:
microSD card (256 MB to 2 GB) or
microSDHC card (4 GB to 8 GB)
If other media are used, they may fail to
•
record data correctly, or they may lose data
that had already been recorded.
MultiMediaCards are not supported.
•
Insert a microSD card
Preparation:
Close the LCD monitor to turn off the
camcorder.
1 Open the microSD card cover.
To remove a microSD card
䡵
Push the microSD card once.
After the card comes out a little, pull it out.
NOTE
Insert and remove the microSD card only
•
while the power is turned off. Otherwise, data
on the card may be corrupted.
Do not touch the terminal on the reverse side
•
of the label.
Change the recording medium
Set [REC MEDIA FOR VIDEO] and [REC
MEDIA FOR IMAGE] to [SD].
Format a microSD card when using it for
the fi rst time
Select [FORMAT SD CARD] to format the
card.
2 Firmly insert the card with its clipped
edge fi rst.
3 Close the microSD card cover.
18
EN
Page 19
RECORDING/PLAYBACK
Recording Files
Video Recording
Slide the mode switch to select
! (video) mode.
SNAPSHOT
To stop recording
䡵
Press START/STOP again.
To view the last recorded scene
䡵
Select
Selecting
scene.
To record a still image during video
䡵
recording
Press SNAPSHOT.
while recording is paused.
A
$ during playback deletes that
Press PLAY/REC to select the
recording mode.
Press START/STOP to start
recording.
Approximate remaining
time for recording
You can also start/stop recording by
selecting [REC] on the LCD monitor.
(On-screen recording control)
䡵
To change the video quality
Change the settings in [VIDEO QUALITY].
䡵
To change the aspect ratio of the image
(16:9/4:3)
Change the settings in [SELECT ASPECT
RATIO].
NOTE
The video recording mode is automatically selected when you turn off the camcorder and then
•
turn on again.
If the camcorder is not operated for 5 minutes while the power is on, it turns itself off
•
automatically to conserve power.
Do not move or shake the camcorder suddenly during recording.
•
If you do so, the driving sound (hum) of the hard disk may be recorded.
19
EN
Page 20
Recording Files (Continued)
Still Image Recording
Slide the mode switch to select
# (still image) mode.
䡵
To view the last recorded image
Select
Selecting
image.
To change the image quality
䡵
Change the settings in [IMAGE QUALITY].
To record still images continuously
䡵
Set to [CONTINUOUS SHOOTING] in
[SHUTTER MODE].
after shooting.
A
$ during playback deletes that
Press PLAY/REC to select the
recording mode.
Press and hold SNAPSHOT
halfway.
The ? indicator becomes green when
the captured image is focused.
Press SNAPSHOT fully to take a
still image.
NOTE
DIS (Digital Image Stabilizer) does not function during still image recording.
•
If the camcorder is not operated for 5 minutes while the power is on, it turns itself off
•
automatically to conserve power.
20
EN
Page 21
Zooming
Preparation:
Select ! or # mode.
•
Select the recording mode.
•
Zoom out Zoom in
W: Wide angle T: Telephoto
You can also zoom out/zoom in by selecting
[W] or [T] on the LCD monitor. (On-screen
zoom control)
Zoom ratio (factory-preset)
! mode # mode
[70X/DIGITAL] [35X/OPTICAL]
To change the maximum zoom ratio
䡵
(
! mode only)
Change the settings in [ZOOM].
NOTE
Macro shooting is possible as close as approx.
5 cm to the subject when the zoom lever is set
all the way to W.
LED Light
Preparation:
Select ! or # mode.
•
Select the recording mode.
•
1 Touch MENU.
2 Select [LIGHT].
3 Select the desired setting.
The LED light remains on
ON
AUTO
OFF
regardless of the surrounding
conditions.
The LED light turns on
automatically when shooting in
insuffi cient light conditions.
Deactivates this function.
Checking the Remaining Battery
Power
! mode:
Press INFO twice or INFO and then select
.
;
# mode:
Press INFO.
䡵
To quit the screen
Select [QUIT] or press INFO.
NOTE
The recordable time display should only be
used as a guide. It is displayed in 10 minute
units.
Checking the Remaining Space on
the Recording Media
Preparation:
Select ! mode.
•
Select the recording mode.
•
Press INFO.
The maximum recording time is displayed for
each video quality mode.
To change the video quality
䡵
1) Select the video quality.
2) Select [SET].
To quit the screen
䡵
Select [QUIT].
21
EN
Page 22
Playing Back Files
Video Playback
Slide the mode switch to select !
(video) mode.
To move to the previous or next page
䡵
Touch [
To play back a few seconds from the
䡵
beginning of each video
Touch [
䡵
N
O
L
J
E
F
Q
K
G
* Slow playback starts when you keep touching the
] or [ ] for over a second.
].
Operations during Video Playback
On-screen buttons
Return to the fi rst scene of the fi le
:
Go to the fi rst scene of the next fi le
:
Return to the index screen
:
Reverse search (during playback)
:
Frame-by-frame playback in reverse
:
direction (during pause)*
Playback
:
Pause
:
Forward search (during playback)
:
Frame-by-frame playback in forward
:
direction (during pause)*
sensor button under
/ G for a while.
E
Press PLAY/REC to select the
playback mode.
The index screen appears.
Select the desired fi le.
䡵
To delete a video
Select $ when playback is stopped.
To change the number of thumbnails
䡵
(6 thumbnails/20 thumbnails)
Move the zoom lever to [W].
Speaker volume䡵
— : Turn down the
volume
+ : Turn up the
volume
22
EN
Page 23
Still Image Playback
Slide the mode switch to select #
(still image) mode.
䡵
To move to the previous or next page
Touch [
䡵
To delete a still image
Select
To change the number of thumbnails
䡵
(6 thumbnails/20 thumbnails)
Move the zoom lever to [W].
䡵
P
F
L
N
F
Q
O
] or [ ] for over a second.
$.
Operations during Still Image Playback On-screen buttons
Change playback order of slide show in reverse direction
:
Change playback order of slide show in forward direction
:
Return to the index screen
:
Display the previous fi le
:
Start the slide show
:
End the slide show
:
Display the next fi le
:
Press PLAY/REC to select the
playback mode.
The index screen appears.
Select the desired fi le.
23
EN
Page 24
Manual Recording
Manual recording mode enables you to set the
focus and screen brightness, etc. manually.
Changing to Manual Recording Mode
Preparation:
Select ! or # mode.
•
Select the recording mode.
•
Select [A/M] twice.
䡵
To return to the auto recording mode
Select [A/M] so that the
appears.
Backlight Compensation
Backlight compensation brightens the subject
by increasing the exposure.
In the manual recording mode:
Select -.
To cancel backlight compensation
䡵
Select
- again.
NOTE
If the LCD monitor is turned upside down, - is
not displayed. Change the setting when the
LCD monitor is in the normal position.
4 indicator
Manual Setting in Menu
In the manual recording mode:
1 Touch MENU.
2 Select [MANUAL SETTING].
3 Select the desired menu.
4 Select the desired setting.
Depending on the kind of settings you
select, you can set the value by using the
touch sensor.
To return to the previous screen
䡵
Select
To quit the screen
䡵
Select [QUIT].
@
.
24
EN
Page 25
USING WITH TV
Viewing Files on TV
This camcorder is designed to be used with
high-defi nition or PAL-type color television
signals. It cannot be used with a television of a
different standard.
Connection with TV
You can output videos from the AV connector
or the HDMI mini connector.
䡵
To connect using the AV connector
Preparation:
GZ-MG680
•
[OUTPUT].
Turn off all units.
•
AC Adapter
To AC Outlet
Set [SWITCH TO ANALOG I/O] to
DC Connector
AV Connector
AV Cable
Preparation: Turn off all units.
HDMI Mini Connector
HDMI Cable (optional)
(Mini to full-sized HDMI cable)
HDMI Connector
NOTE
When connecting to the HDMI cable, the
•
image or sound may not appear on the TV
properly depending on the TV connected.
In such cases, perform the following
operations.
1) Disconnect the HDMI cable and connect
it again.
2) Turn off and on the camcorder again.
DC Connector
AC Adapter
To AC Outlet
AV Input Connector
GZ-MG680
䡵
mini connector
We recommend using the Category 2 HDMI
cable (High Speed cable).
To connect using the HDMI
Playback Operation
After the connection with TV is completed
1 Turn on the camcorder and the TV.
2 Set the TV to its VIDEO mode.
3 (Only when connecting the camcorder to
the VCR/DVD recorder)
Turn on the VCR/DVD recorder, and
set the VCR/DVD recorder to its AUX
input mode.
4 Start playback on the camcorder.
(墌 p. 22, 23)
25
EN
Page 26
EDITING
Managing Files
CAUTION
Do not remove the recording medium or
perform any other operation (such as turning
off the power) while accessing fi les. Also,
be sure to use the provided AC adapter, as
the data on the recording medium may be
corrupted if the battery becomes exhausted
during operation. If the data on the recording
medium becomes corrupted, format the
recording medium to use the medium again.
Capturing a Still Image from a Video
You can capture the desired scene from a
recorded video, and store it as a still image.
Preparation:
Select ! mode.
•
Select the playback mode.
•
Press SNAPSHOT when playback is
paused.
NOTE
Captured still images are stored at a
•
resolution of 640 x 360 (if the video was
recorded in 16:9) or 640 x 480 (if the video
was recorded in 4:3). The image can be
elongated in the horizontal or vertical
directions depending on the quality of the
source video fi le.
The continuous shooting function cannot be
•
used to capture images.
You cannot capture video during playback.
•
Deleting Files
Protected fi les cannot be deleted. To delete
•
them, release the protection fi rst.
Once fi les are deleted, they cannot be
•
restored. Check fi les before deleting.
Preparation:
Select ! or # mode.
•
Select the playback mode.
•
1 Touch MENU.
2 Select [DELETE].
3 Select [CURRENT].
4 Select [YES].
You can select the previous or next fi le by
selecting { or }.
To quit the screen
䡵
Select [QUIT].
26
EN
Page 27
COPYING
Copying Files
Types of Copying and Connectable Device
The Camcorder
You can copy fi les between
the HDD and microSD card
with this camcorder alone.
DVD Burner
(CU-VD50/CU-VD3)
You can copy fi les recorded
on this camcorder onto DVD
discs.
PC
You can copy fi les from the
camcorder to a DVD using
a PC.
VCR/DVD Recorder
You can dub video recorded
on this camcorder onto
VCR/DVD recorder.
NOTE
It is recommended to use the JVC DVD burner
(CU-VD50/CU-VD3). When using CU-VD20 or
CU-VD40, the recording time may take approx.
2 times longer than the time that is described
in the instruction manual of DVD burner.
Using a DVD Burner
Supported discs: 12cm DVD-R, DVD-RW
Regarding DVD-R discs, only unused DVD-R
•
discs can be used. Regarding DVD-RW discs,
used DVD-RW discs can also be used, but
they need to be formatted before recording.
Formatting a disc deletes all content recorded on
the disc up until that time.
Dual-layer discs cannot be used.
•
Regarding fi nalization after copying
The disc is automatically fi nalized so that it can be
played on other devices. After fi nalizing, the disc is
a play-only disc, so no more fi les can be added.
Connection with a DVD Burner
Preparation:
Turn on the camcorder fi rst, then turn on the
DVD burner.
DC Connector
USB Connector
AC Adapter
USB Cable*
To AC Outlet
USB Connector
NOTE
Refer also to the optional DVD burner’s
•
instruction manual.
* Use the USB cable that came with the DVD
burner.
DVD Burner
27
EN
Page 28
Copying Files (Continued)
Backup All Files
Preparation:
Connect the camcorder to the DVD burner.
•
Select ! mode.
•
1 Select [CREATE FROM ALL].
2 Select the desired menu.
[ALL SCENES]:
•
All fi les in the recording medium are
copied.
[UNSAVED SCENES]:
•
Files that have never been copied to a
DVD disc are automatically selected and
copied.
3 Select the desired disc number.
If you select [ALL], all discs in the list are
•
created.
To preview scenes, select [CHECK].
•
mark shows that the disc is created
•
already.
4 Select [YES] or [NO].
[YES]: Displays the thumbnails by group.
•
[NO]: Displays the thumbnails by date.
•
5 Select [EXECUTE].
The fi les are copied on the disc. When
•
[COMPLETED] appears, touch OK.
When [INSERT NEXT DISC PRESS
•
[STOP] TO EXIT CREATE] appears,
change the disc. Remaining fi les are
copied on the second disc.
To cancel copying, select [STOP].
•
Copying Video Files that Have Never
Been Copied
Files that have never been copied to the DVD
discs are automatically selected and copied.
1 Open the LCD monitor to turn on the
camcorder.
2 Press DIRECT DVD.
3 Select [EXECUTE].
The DVD disc begins to be created.
•
When [COMPLETED] appears, touch
OK.
When [INSERT NEXT DISC PRESS
•
[STOP] TO EXIT CREATE] appears,
change the disc. Remaining fi les are
copied on the second disc.
To cancel the DVD creation, select
•
[CANCEL].
䡵
To quit the screen
1) Select [QUIT].
2) When [QUIT?] appears, select [YES].
䡵
To play back the created disc using the
camcorder
1) Connect the camcorder to the DVD
burner.
2) Turn on the camcorder fi rst, then turn on
the DVD burner.
3) Select [PLAYBACK].
4) Select the desired folder.
5) Select the creation date of the disc.
6) Select the desired fi le. To return to the
previous screen, select @.
28
EN
Page 29
Creating a DVD using a PC
Please read the “JVC SOFTWARE LICENCE
AGREEMENT” in the CD-ROM instruction
before you install software.
You can copy the data from the camcorder and
create a DVD using a PC.
Installing the software to the PC
Q
System Requirements
Windows Vista
OS: Windows Vista
Home Basic (SP1)
Home Premium (SP1)
(32-bit, pre-installed)
CPU: Either one of the following:
Intel® Pentium® 4, 1.6 GHz or higher
•
Intel® Pentium® M, 1.4 GHz or higher
•
Intel® CoreTM Duo, 1.5 GHz or higher
•
RAM: At least 1 GB
Windows XP
OS: Windows
Home Edition (SP2/SP3)
Professional (SP2/SP3)
(pre-installed)
CPU: Either one of the following:
Intel® Pentium® 4, 1.6 GHz or higher
•
Intel® Pentium® M, 1.4 GHz or higher
•
Intel® CoreTM Duo, 1.5 GHz or higher
•
RAM: At least 512 MB
®
XP
®
Preparation:
Load the provided CD-ROM into the PC.
In Windows Vista, the auto play dialog box
appears.
1 Click [Easy Installation].
Follow the on-screen instructions.
2 Click [Next].
3 Click [Finish].
Everio MediaBrowser icon is created on the
desktop.
䡵
To check the PC specifi cation
Right-click on [Computer] (or [My
Computer]) in the [Start] menu and select
[Properties].
NOTE
Make sure your PC has a recordable DVD
•
drive.
If your system does not meet the
•
requirements, it is recommended to copy
fi les using the DVD burner. (墌 p. 27)
Macintosh users may use the software
•
included with their Macintosh (iMovie ’08,
iPhoto) to copy fi les to their computer.
To see the Instruction Guide for Everio
䡵
MediaBrowser
1) Double-click the icon of Everio
MediaBrowser.
2)
Click [Help], and click [MediaBrowser Help].
Click
Click
29
EN
Page 30
Copying Files (Continued)
Making Backup on the PC
R
Preparation:
Install the software to the PC.
•
Make sure that enough free space is left in
•
the PC’s HDD.
Close the LCD monitor to turn off the
•
camcorder.
USB Connector
USB Cable
USB Connector
1 Open the LCD monitor to turn on the
camcorder.
2 Select [BACK UP].
3 Click [All volume in camcorder] and
click [Next].
4 Click [Start].
Backup starts.
To disconnect the camcorder from the
䡵
PC
1) Right-click the icon (Safely Remove
Hardware) on the task bar and select
[Safely remove USB Mass Storage
Device].
2) Follow the on-screen instructions and
make sure that the device can be safely
removed.
3) Disconnect the USB cable and close the
LCD monitor.
NOTE
It takes time to back up many videos.
Everio MediaBrowser starts on the PC.
30
EN
Page 31
Making User Lists to Arrange the
S
Files
You can make a user list of a certain subject
(such as Travel, Athletic meet) and put the fi les
related to the subject into the user list.
Preparation:
Make backup on the PC.
1 Double-click the icon and open the
calendar.
2 Select [Movies only].
3 Click [+].
5 Double-click the recording date.
The fi les recorded on the day are displayed.
6 Drag the fi le and drop into the user
list.
To add other fi les into the user list, repeat
steps 5 and 6.
4 Input the name of the new user list
and click [OK].
31
EN
Page 32
Copying Files (Continued)
Copying Files to a DVD
T
Preparation:
Use a recordable DVD disc. (It is
recommended to use a DVD-R disc.)
1 Select the user list and click [Create
Disc].
2 Click [Select fi les individually] and
click [Next].
To add all the fi les onto DVD discs, click
[Select all fi les displayed], then go to
step 4.
3 Drag the fi le, and drop into the part at
the bottom and click [Next].
4 Input the disc name, select the top
menu style and click [Next].
5 Click [Start].
NOTE
For detail on operating Everio MediaBrowser,
•
click [Help] and refer to [MediaBrowser Help].
Adobe® Reader® must be installed to read
•
[MediaBrowser Help]. Adobe
be loaded from Adobe’s web site:
http://www.adobe.com
For assistance in operating the provided
•
software, refer to the support information.
(墌 p. 33)
®
Reader® can
32
EN
Page 33
Folder Structure and Extensions
Recording medium
[DCIM]
[XXXJVCSO]
[SD_VIDEO]
[MGR_INFO]
[PRGXXX]
[PRGXXX.PGI]
[MOVXXX.MOD]
[MOVXXX.MOI]
[PRGXXX]
[EXTMOV]
[MOV_XXX.MOD]
[DEM_XXX.MPG]
X = number
Contains the still image folders.
Contains the video fi le folders.
Management information* for the media as a whole
Management information*
Video fi le
Management information* for the video fi les
Video fi le which management information is corrupted.
Demo video fi le
[PRIVATE]
* Information such as the date and time of recording, recorded with the video fi le.
Contains management information fi les of event and/or DVD
creation information for the fi les taken with the camcorder.
Customer Support Information
Use of this software is authorized according to the terms of the software license.
JVC
When contacting the nearest JVC offi ce or agency in your country (refer to the JVC Worldwide Service
Network at http://www.jvc-victor.co.jp/english/worldmap/index-e.html) about this software, please have the
following information ready.
Product Name, Model, Problem, Error Message
•
PC (Manufacturer, Model (Desktop/Laptop), CPU, OS, Memory (MB), Available Hard Disk Space (GB))
•
Please note that it may take some time to respond to your questions, depending on their subject matter.
JVC cannot answer questions regarding basic operation of your PC, or questions regarding specifi cations
or performance of the OS, other applications or drivers.
Pixela
Region Language Phone #
USA and Canada English +1-800-458-4029 (toll-free)
Europe (UK, Germany, France,
and Spain)
Other Countries in Europe
Asia (Philippines) English +63-2-438-0090
China Chinese +86-21-5385-3786
Homepage: http://www.pixela.co.jp/oem/jvc/mediabrowser/e/
Please check our website for latest information and downloading.
English/German/French/Spanish +800-1532-4865 (toll-free)
English/German/French/Spanish/
Italian/Dutch
+44-1489-564-764
33
EN
Page 34
Copying Files (Continued)
Dubbing Files to a VCR/DVD Recorder
Preparation:
Create a playlist.
•
GZ-MG680
•
[OUTPUT].
Turn off all units.
•
䡵
To connect using the AV connectors
(analog dubbing)
AC Adapter
To AC Outlet
VCR/DVD Recorder
Set [SWITCH TO ANALOG I/O] to
DC Connector
AV Connector
AV Cable
1 Open the LCD monitor to turn on the
camcorder.
2 Set the VCR/DVD recorder to its AUX
input mode.
Check that the images from the camcorder
are input correctly to the VCR/DVD
recorder.
3 Play back playlists on the camcorder.
1) Touch MENU.
2) Select [DUBBING PLAYBACK].
3) Select the desired playlist.
4) Select [YES]. (A black screen is
displayed for 5 seconds at the fi rst and
the last scene.)
4 At the point you want to start
dubbing, start recording on the VCR/
DVD recorder.
Refer to the VCR/DVD recorder’s
instruction manual.
To stop dubbing
䡵
Stop recording on the VCR/DVD recorder.
To hide the date or icons on the screen
䡵
Change the settings in [DISPLAY ON TV].
Switching indication modes on LCD
monitor
Each time you touch DISPLAY, indications
on LCD monitor switch as shown below:
34
In recording mode:
All indications/Indications for selected
functions
AV Connector
(Input)
EN
In playback mode:
All indications/Only date and time/No
indications
Page 35
Using with a Portable Media Player
䡵
Turning on the Export Mode
You can easily transfer videos recorded in
export mode to iTunes
export setting turned on are transferred to
PC. For details on transferring, refer to the
operation guide of MediaBrowser in the CDROM.
®
. All the fi les with the
To cancel the export setting
Select the fi le and select [
䡵
To quit the screen
1) Select [DONE].
2) Select [YES].
䡵
To confi rm the export setting
Press EXPORT on the index screen.
] again.
Preparation:
Select ! mode.
•
Select the recording mode.
•
Press EXPORT twice.
To turn off the export mode
䡵
Press EXPORT twice.
Changing the Export Setting
You can set the recorded videos to the export
setting.
Preparation:
Select ! mode.
•
Select the playback mode.
•
1 Press EXPORT.
2 Select the fi le and set [ ].
Transferring the Files to PC
Preparation:
Install iTunes
http://www.apple.com/itunes/
®
on a PC.
1 Connect the camcorder to the PC
with the USB cable.
2 Select [EXPORT TO LIBRARY].
All the fi les with the export setting turned
on are transferred to PC.
To check the content of the fi le, select
•
[CHECK].
3 Select [DONE].
35
EN
Page 36
Uploading Files to Websites
Turning on the Upload Mode
You can upload the fi le to video sharing
websites (YouTube
Preparation:
Select ! mode.
•
Select the recording mode.
•
Press UPLOAD twice.
If you record a fi le with the upload mode
set on, the recording stops automatically
10 minutes after the recording is started.
The remaining time is displayed on the
LCD monitor.
NOTE
The upload mode turns off each time recording
is fi nished.
TM
) quickly after recording.
Uploading Files
For details on uploading fi les, refer to the
operation guide of MediaBrowser in the CDROM.
1 Connect the camcorder to the PC
with the USB cable.
2 Select [UPLOAD].
36
EN
Page 37
FURTHER INFORMATION
Changing the Menu Settings
To return to the previous screen
1 Touch MENU.
2 Select the desired menu.
䡵
Select @.
To quit the screen
䡵
Select [QUIT].
3 Select the desired setting.
Troubleshooting
Before requesting service, consult the
following chart. If the solutions indicated in the
chart do not solve the problem, consult your
nearest JVC dealer or JVC service center for
instructions.
Refer also to the FAQ of new products on
JVC’s website.
Power
Display
Trouble Action
Connect the AC adapter correctly.
No power is supplied.
The remaining battery
display is not correct.
The LCD monitor is
diffi cult to see.
•
Recharge the battery pack.
•
Fully charge the battery pack, run it down, and then recharge it
•
again.
If the camcorder is used for long periods of time in high or low
•
temperatures, or if the battery pack is repeatedly charged, the
amount of remaining battery may not be displayed correctly.
The LCD monitor may be diffi cult to see if used in bright areas
•
such as under direct sunlight.
The following phenomena are not
malfunctions.
The camcorder heats up when it is used for a
•
long time.
The battery heats up during charging.
•
When playing back a video, the image stops
•
momentarily or the sound is interrupted at
junctions between scenes.
LCD monitor momentarily become red or
•
black when sunlight is recorded.
Black spots, or red, green, or blue spots
•
appear on the LCD monitor.
(The LCD monitor contains 99.99% effective
pixels, but 0.01% of fewer pixels may be
ineffective.)
37
EN
Page 38
Troubleshooting (Continued)
Trouble Action
Recording cannot be
performed.
Recording
Recording stops by
itself.
Sound or video are
interrupted.
Playback
Cannot fi nd a recorded
video.
The lamp does not fl ash
during battery pack
charging.
Other problems
GZ-MG680
When connecting to
the HDMI cable, the
image or sound does
not appear on the TV
properly.
GZ-MG680
HDMI-CEC functions do
not work properly, and
the TV does not work
in conjunction with the
camcorder.
䡵
If a malfunction occurs in the HDD
!Perform [FORMAT HDD]. (All data is deleted.)
# If this does not solve the problem, perform the disc check function from a PC after formatting.
$ If this does not solve the problem, contact the JVC customer service for repairs.
䡵
To reset the camcorder when it does not operate normally
! Close the LCD monitor and remove the power supply (battery pack or AC adapter) from the
camcorder, then reattach it.
# Execute [FACTORY PRESET].
Slide the mode switch to select the desired mode (! or #).
•
If the camcorder temperature increases, REC fl ashes in the LCD
•
monitor and recording stops automatically to protect the HDD.
Turn off the camcorder, wait for a while, and start recording again.
Move away from a place where the camcorder is affected by
•
excessive sound or vibration (such as a concert hall).
A malfunction may occur in the HDD of the camcorder. In this
•
case, record to a microSD card.
Insert a commercially available microSD card, and set each of the
•
[REC MEDIA FOR VIDEO] and [REC MEDIA FOR IMAGE] to [SD].
Recording stops automatically after 12 hours of continuous
•
recording.
Sometimes playback is interrupted at the connecting section
•
between two scenes. This is not a malfunction.
Select [PLAYBACK MPG FILE] then search the video on the index
•
screen.
(Video fi les that have damaged management information can be
played back.)
Cancel group display and date search functions.
•
Change the setting in [REC MEDIA FOR VIDEO] or [REC MEDIA
•
FOR IMAGE]. (Files on other media are not displayed.)
Check the remaining battery pack charge.
•
(When the battery pack is fully charged, the lamp does not fl ash.)
When recharging in either a hot or cold environment, ensure that
•
battery is being charged within the permitted temperature range.
(If the battery pack is being recharged outside the permitted
temperature range, recharging may stop to protect the battery pack.)
When connecting to the HDMI cable, the image or sound
•
may not appear on the TV properly depending on the TV
connected. In such cases, perform the following operations.
1) Disconnect the HDMI cable and connect it again.
2) Turn off and on the camcorder again.
TVs may operate differently depending on the specifi cations,
•
even if they are HDMI-CEC compliant. Therefore, the HDMI-CEC
functions of the camcorder cannot be guaranteed to operate in
combination with all the TVs. In such cases, set [HDMI CONTROL]
to [OFF].
38
EN
Page 39
Warning Indications
Indication Action
Set the clock. If the message still appears after setting the
•
SET DATE/TIME!
clock, the battery for the clock has been depleted. Consult your
nearest JVC dealer.
COMMUNICATING ERROR
CANNOT USE IN
VIDEO MODE
NOT FORMATTED
FORMAT ERROR!
DATA DELETION ERROR
HDD ERROR!
MEMORY CARD ERROR!
CANNOT TAKE MORE STILL
IMAGES AT THE MOMENT
DROP DETECTION WORKED AND
THE POWER IS TURNED OFF
RECORDING CANCELLED
RECORDING FAILURE
PLAYBACK FAILED
Be sure to use JVC battery packs.
•
Set [REC MEDIA FOR VIDEO] to [HDD].
•
Replace the microSD card.
•
Select [OK] and select [YES] to perform formatting.
•
Check the operating procedure, and perform once again.
•
Turn off the camcorder, and turn it on again.
•
Perform formatting. (All data is deleted.)
•
Turn off the camcorder, and turn it on again.
•
Perform formatting. (All data is deleted.)
•
Remove and re-insert the microSD card. (MultiMediaCard
•
cannot be used.)
Remove any dirt from the microSD card terminals.
•
Insert the microSD card before switching the power on.
•
Turn off the camcorder, and turn it on again.
•
Stop video recording, and then record a still image. (If a
•
microSD card is removed or inserted during video recording, a
still image cannot be recorded.)
Set [REC MEDIA FOR VIDEO] to [SD], then record to a
•
microSD card.
Turn off the camcorder and turn it on again.
•
Prevent the camcorder from vibration and shock.
•
microSD card:
Remove and re-insert the microSD card. (MultiMediaCard
•
cannot be used.)
Remove any dirt from the microSD card terminals.
•
Insert the microSD card before switching the power on.
•
HDD:
Do not allow the camcorder to be subject to impact/vibrations.
•
39
EN
Page 40
Specifi cations
General
䡵
Power supply
DC 11 V (Using AC adapter)
DC 7.2 V (Using battery pack)
Power consumption
Approx. 2.3 W*
* When the LED light is off and the monitor
backlight is set to [STANDARD] mode.
Dimensions (W x H x D)
53 mm x 68 mm x 113 mm
Weight
Approx. 305 g
Approx. 350 g (incl. battery pack)
Operating temperature
0°C to 40°C
Storage temperature
–20°C to 50°C
Operating humidity
35% to 80%
Camera/LCD monitor
䡵
Pickup
1/6" (800,000 pixels) CCD
Lens
F 1.8 to 4.0, f = 2.2 mm to 77.0 mm,
35:1 power zoom lens
Filter diameter
ø30.5 mm
LCD monitor
2.7" diagonally measured,
LCD panel/TFT active matrix system
LED Light
Within 1.5 m
(recommended shooting distance)
Connectors
䡵
AV input/output
Video input*: 0.8 V (p-p) to 1.2 V (p-p), 75
Video output: 1.0 V (p-p), 75
Audio input*: 300 mV (rms), 50 k
Audio output: 300 mV (rms), 1 k
GZ-MG680
*
GZ-MG680
HDMI Mini Connector
USB
Mini USB type A and type B,
USB 2.0 compliant
only
HDMI
W
W
W
䡵
AC Adapter
Power requirement
AC 110 V to 240 V
Output
DC 11 V
§
Remote Control
䡵
Power supply
DC 3 V
Battery life
Approx. 1 year
(depending on the frequency of use)
Operating distance
Within 5 m
Operating temperature
0°C to 40°C
Dimensions (W x H x D)
42 mm x 14.5 mm x 91 mm
Weight
Approx. 30 g (incl. battery)
Still image
䡵
Format
JPEG
Image size
832 x 624
Image quality
FINE / STANDARD
Video
䡵
Signal format
PAL standard
Recording/Playback format
Video: MPEG-2
Audio: Dolby Digital (2ch)
Recording mode (video)
W
ULTRA FINE:720 x 576 pixels, 8.5 Mbps (VBR)
FINE: 720 x 576 pixels, 5.5 Mbps (VBR)
NORMAL: 720 x 576 pixels, 4.2 Mbps (VBR)
ECONOMY: 352 x 288 pixels, 1.5 Mbps (VBR)
Recording mode (audio)
ULTRA FINE:48 kHz, 384 kbps
FINE: 48 kHz, 384 kbps
NORMAL: 48 kHz, 256 kbps
ECONOMY: 48 kHz, 128 kbps
Design and specifi cations subject to change
without notice.
, 1 A
, 50 Hz/60 Hz
$
40
EN
Page 41
Approximate recordable time (for video)
h: hour/m: minute
Recording medium
Quality
ULTRA FINE 14 h 20 m 28 h 40 m 57 m 1 h 54 m
FINE 21 h 20 m 42 h 40 m 1 h 25 m 2 h 50 m
NORMAL 28 h 10 m 56 h 20 m 1 h 53 m 3 h 46 m
ECONOMY 75 h 00 m 150 h 00 m 4 h 58 m 9 h 56 m
GZ-MG630
HDD microSD Card
60 GB
GZ-MG680
120 GB 4 GB 8 GB
Approximate number of images (for still image)
The HDD can record up to 9999 still images in either mode.
Recording medium
Image size/Quality
4:3
832 x 624 / FINE 1010 2050 4160 7625 9999 9999
832 x 624 / STANDARD 1515 3080 6240 9999 9999 9999
256 MB 512 MB 1 GB 2 GB 4 GB 8 GB
microSD Card
Required charging/recording time (approx.)
h: hour/m: minute
Battery pack Charging time Recording time
BN-VF808U
(Provided)
BN-VF815U 2 h 40 m 4 h 15 m*
BN-VF823U 3 h 40 m 6 h 25 m*
1 h 50 m 2 h 5 m*
* When the LED light is off and the monitor backlight is set to [STANDARD] mode.
41
EN
Page 42
Cautions
Battery Pack
The supplied battery pack is a
lithium-ion battery. Before using
the supplied battery pack or an
optional battery pack, be sure
to read the following cautions:
To avoid hazards
•
... do not burn.
... do not short-circuit the terminals. Keep it away
from metallic objects when not in use. When
transporting, make sure the provided battery
cap is attached to the battery. If the batter y cap
is misplaced, carry the battery in a plastic bag.
... do not modify or disassemble.
... do not expose the battery to temperatures
exceeding 60°C, as this may cause the battery
to overheat, explode or catch fi re.
... use only specifi ed chargers.
To prevent damage and prolong service life
•
... do not subject to unnecessary shock.
... charge within the temperature range of 10°C
to 35°C. Cooler temperatures require longer
charging time, or in some cases stop charging
at all. Warmer temperatures prevent complete
charging, or in some cases stop charging at all.
... store in a cool, dry place. Extended exposure
to high temperatures will increase natural
discharge and shorten service life.
... fully charge and then fully discharge the battery
every 6 months when storing the battery pack
over a long period of time.
... remove from charger or powered unit when not
in use, as some machines use current even
when switched off.
Terminals
Recording Medium
Be sure to follow the guidelines below
•
to prevent corruption or damage to your
recorded data.
Do not bend or drop the recording medium,
•
or subject it to strong pressure, jolts or
vibrations.
Do not splash the recording medium with water.
•
Do not use, replace, or store the recording
•
medium in locations that are exposed to
strong static electricity or electrical noise.
Do not turn off the camcorder power or
•
remove the battery or AC adapter during
shooting, playback, or when otherwise
accessing the recording medium.
Do not bring the recording medium near
•
objects that have a strong magnetic fi eld or
that emit strong electromagnetic waves.
Do not store the recording medium in locations
•
with high temperature or high humidity.
Do not touch the metal parts.
•
When formatting or erasing data using
•
the camcorder, only the fi le administration
information is changed. The data is not
completely erased from the hard disk. If you
want to completely erase all of the data,
we recommend either using commercially
available software that is specially designed for
that purpose, or by physically destroying the
camcorder with a hammer etc.
Hard Disk
Do not use the unit where it is subject to
•
vibrations or loud sounds.
If you move the unit suddenly, the drop
•
detection function may operate and the power
may be turned off.
42
LCD Monitor
To prevent damage to the LCD monitor, DO
•
NOT
... push it strongly or apply any shocks.
... place the camcorder with LCD monitor on the
bottom.
To prolong service life
•
... avoid rubbing it with coarse cloth.
EN
Page 43
Main Unit
For safety, DO NOT
•
... open the camcorder’s chassis.
... disassemble or modify the unit.
... allow infl ammables, water or metallic objects to
enter the unit.
... remove the battery pack or disconnect the
power supply while the power is on.
... leave the battery pack attached when the
camcorder is not in use.
... place naked fl ame sources, such as lighted
candles, on the apparatus.
... expose the apparatus to dripping or splashing.
... leave dust or metal objects adhered to the
power plug or an AC wall outlet.
... insert any objects in the camcorder.
Avoid using the unit
•
... in places subject to excessive humidity or dust.
... in places subject to soot or steam such as near
a cooking stove.
... in places subject to excessive shock or vibration.
... near a television set.
... near appliances generating strong magnetic
or electric fi elds (speakers, broadcasting
antennas, etc.).
... in places subject to extremely high (over 40°C)
or extremely low (under 0°C) temperatures.
... in places where air pressure is low (more than
3000 m above the sea level).
DO NOT leave the unit
•
... in places of over 50°C.
... in places where humidity is extremely low
(below 35%) or extremely high (above 80%).
... in direct sunlight.
... in a closed car in summer.
... near a heater.
... in high places such as on a TV. Leaving the unit
in high places while a cable is connected may
result in a malfunction if the cable is caught and
the unit falls onto the fl oor.
To protect the unit, DO NOT
•
... allow it to become wet.
... drop the unit or strike it against hard objects.
... subject it to shock or excessive vibration during
transportation.
... keep the lens directed at extremely bright
objects for long periods.
... expose the lens to direct sunlight.
... swing it excessively when using the hand strap.
... swing the soft camcorder case excessively
when the camcorder is inside it.
... place the camcorder in dusty or sandy areas,
such as on a beach.
To prevent the unit from dropping,
•
Fasten the grip belt securely.
•
When using the camcorder with a tripod,
•
attach the camcorder to the tripod securely.
If the camcorder drops, you may be injured and
the camcorder may be damaged.
When a child uses the unit, there must be
parental guidance.
43
EN
Page 44
Terms
A
AC Adapter ........................................................16
AV Connection .............................................25, 34
B
Backlight Compensation .................................... 24
Battery Pack ................................................ 16, 42
C
CD-ROM ...................................................... 10, 29
Clock Adjust ......................................................16
D
Date/Time Setting ...............................................3
Daylight Saving Time .........................................16
Deleting Files ....................................................26
Digest Playback ................................................. 22
Dubbing Playback ..............................................34
DVD Backup ......................................................27
DVD Burner ....................................................... 27
E
Export to Library Mode ...................................... 35
F
Finalize .............................................................. 27
H
Hard Disk ..........................................................42
HDMI .................................................................25
I
iTunes ................................................................ 35
L
Language Setting ..............................................17
LCD Monitor ................................................14, 42
LED Light ..........................................................21
M
Manual Recording .............................................24
Menu Settings ...................................................37
microSD Card ....................................................18
N
Number of Images .............................................41
O
On-screen Recording Control ............................19
On-screen Zoom Control ...................................21
P
Portable Media Player ....................................... 35
Q
Quick Review ...............................................19, 20
R
Recordable Time ...............................................41
Recording Medium ............................................42
Remaining Battery Power .................................. 21
Remaining Recording Time ...............................21
Remote Control ...........................................11, 13
S
Speaker Volume ................................................22
U
Uploading Files .................................................36
USB Cable ................................................... 27, 30
V
Viewing Files on TV ........................................... 25
Y
YouTube ............................................................. 36
Z
Zoom .................................................................21
© 2008 Victor Company of Japan, Limited
Printed in Malaysia
AA
1008FOH-AL-VM
Loading...