JVC GV-CB3E User Manual

JLIP VIDEO CAPTURE BOX

JLIP VIDEOREDIGERINGS-BOKS / JLIP VIDEO-FRAMEGRABBER-BOX / BOÎTIER DE CAPTURE VIDÉO JLIP / JLIP VIDEO CAPTURE TOESTEL / CAPTURADOR DE VIDEO / SCATOLA JLIP PER CATTURA VIDEO / JLIP KUVIENSIEPPAUSRASIA / JLIP VIDEO CAPTURE BOX / JLIP VIDEOFANGSTBOXS /

ВИДЕОМОНТАЖНОЕ СТЫКОВОЧНОЕ УСТРОЙСТВО JLIP

ENGLISH

GV-CB3E

DEUTSCH

FRANÇAIS

NEDERLANDS

CASTELLANO

ITALIANO

DANSK

SUOMI

SVENSKA

NORSK

INSTRUCTIONS

BEDIENUNGSANLEITUNG

INSTRUCTIONS

GEBRUIKSAANWIJZING

MANUAL DE INSTRUCCIONES

ISTRUZIONI

INSTRUKTIONSBOG

KÄYTTÖOHJEET

BRUKSANVISNING

LYT0196-001A

2 EN

Dear Customer,

Thank you for purchasing this VIDEO CAPTURE BOX. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product.

It is recommended that you . . .

.... refer to "Controls and Connectors" (Z pg. 7)

and familiarize yourself with connector locations before use.

.... read thoroughly the Safety Precautions and

Safety Instructions that follow. They contain extremely important information regarding the safe use of your new VIDEO CAPTURE BOX.

IMPORTANT (For owners in U.K.)

Connection to the mains supply in the United Kingdom.

DO NOT cut off the mains plug from this equipment.

If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.

BE SURE to replace the fuse only with an identical approved type, as originally fitted, and to replace the fuse cover.

If nontheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. If this product is not supplied fitted with a mains plug then follow the instructions given below: DO NOT make any connection to the Larger Terminal coded E or Green. The wires in the mains lead are coloured in accordance with the following code:

Blue to N (Neutral) or Black Brown to L (Live) or Red

If these colours do not correspond with the terminal identifications of your plug, connect as follows: Blue wire to terminal coded N (Neutral) or coloured black. Brown wire to terminal coded L (Live) or coloured Red. If in doubt — consult a competent electrician.

SAFETY PRECAUTIONS

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTIONS:

n To prevent shock, do not open the cabinet.

No user serviceable parts inside. Refer servicing to qualified personnel.

n When you are not using the AC Adapter for a

long period of time, it is recommended that you disconnect the power cord from the AC outlet.

NOTES:

●

The rating plate (serial number plate) and safety caution are on the bottom of the VIDEO CAPTURE BOX.

●

The rating plate (serial number plate) of the AC Adapter is on its top.

This unit is produced to comply with Standard IEC Publ. 65.

CAUTIONS

DO NOT attempt to insert foreign objects into the connectors, as this can lead to electric shock or fire. If an object is accidentally inserted, unplug it and contact your JVC dealer. Be especially careful with children.

If during use you notice that the VIDEO CAPTURE BOX is damaged, unplug it and contact your JVC dealer. Use of the VIDEO CAPTURE BOX under these conditions can lead to fire or electric shock.

DO NOT attempt to repair or modify the VIDEO CAPTURE BOX. Doing so may result in malfunctions or injury. If a problem occurs, contact your JVC dealer.

EN 3

Failure to heed the following precautions may result in damage to the VIDEO CAPTURE BOX.

1. DO NOT place the VIDEO CAPTURE BOX . . .

.... in an environment prone to extreme temperatures or humidity.

.... in direct sunlight.

.... in a dusty environment.

.... in an environment where strong magnetic fields are generated.

.... on a surface that is unstable or subject to vibration. The unit may fall, causing injury.

DO NOT place heavy objects on the VIDEO CAPTURE BOX.

DO NOT place anything which might spill on top of the VIDEO CAPTURE BOX.

AVOID violent shocks to the VIDEO CAPTURE BOX during transport.

DO NOT leave the AC Adapter plugged in when the VIDEO CAPTURE BOX is not in use.

DO NOT use accessories other than those designated in the instructions. Use of others can lead to fire or electric shock.

7. DO NOT connect devices to the VIDEO CAPTURE BOX other than those designated in the instructions. Use of others can lead to malfunctions.

Batteries

•This VIDEO CAPTURE BOX requires 6 LR6 (AA)-

size alkaline batteries. LR6 (AA)-size nickelcadmium (Ni-Cd) or nickel-metal hydride (Ni-MH) batteries can also be used.

•Do not use manganese batteries as they do not

have sufficient energy to power this VIDEO CAPTURE BOX.

•Use the batteries properly. The wrong use can

cause them to leak, or become hot or damaged. When replacing the batteries, insert them with their (+) and (–) polarity marks properly aligned, as indicated by the orientation marking inside the battery cover.

•When the batteries become cold in cooler

temperatures (below 10 °C), such as outdoors in winter, their lifetime shortens and they may cease to function. If this happens, place the batteries in your pocket or other warm, protected place for a short time, then re-insert them in the VIDEO CAPTURE BOX. We recommend using LR6 (AA)size nickel-cadmium batteries as they can power the camera even at 0°C.

•If the (+) and (–) polarity marks are dirty with

sweat or oil, this will cause contact failure. Wipe them off with a dry cloth, then use the batteries.

•Keep new batteries handy if you plan to use the VIDEO CAPTURE BOX for an extended period of time (for travel, etc.).

•Before using Ni-Cd or Ni-MH batteries, be sure to charge them fully using their designated battery charger.

•Since batteries become hot after they are exhausted, be careful when replacing them with new ones.

•If the batteries are not used for an extended period, remove them from the VIDEO CAPTURE BOX to avoid battery leakage, which can cause malfunctions to occur.

•Do not use different kinds of batteries or old and new batteries together.

•Do not expose the batteries to excessive heat, as it may cause them to leak or explode.

•Do not dispose of batteries in fire.

•Do not short-circuit the terminals. Keep them away from metallic objects when not in use.

4 EN

CAUTIONS

(cont.)

How to handle a CD-ROM

● Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not write anything or put a sticker on either the front or back surface. If the CD-ROM gets dirty, gently wipe it with a soft cloth outward from the center hole using a circular motion.

● Do not use conventional disc cleaners or cleaning spray.

● Do not bend the CD-ROM or touch its mirror surface.

● Do not store your CD-ROM in a dusty, hot or humid environment. Keep it away from direct

sunlight.

MAINTENANCE

If the inside of the VIDEO CAPTURE BOX is left dusty for a long time, its use can lead to fire or malfunction. Consult your JVC dealer on cleaning.

AC Adapter (Optional)

● DO NOT remove the cover and attempt to repair or modify the AC Adapter. Doing so may result in malfunctions or electrical shock and injury. If a problem occurs, contact your JVC dealer.

● Make sure the Power Cord is securely connected to the AC Adapter.

● When using the AC Adapter, use only the supplied Power Cord. Use of any other cord may

result in shock or fire.

● Connect the Power Cord to the AC Adapter before connecting it to an AC outlet. If you plug it into an outlet first, and the Adapter’s terminals come in contact with a metal surface or object, a short circuit or fire may result.

● Vibration noise can sometimes be heard coming from the inside of the AC Adapter. This is normal.

● The AC Adapter processes electricity internally, and will become warm during use. This is normal. Make sure to use the AC Adapter in well-ventilated areas only.

CAUTION:

Changes or modifications not approved by JVC could void user’s authority to operate the equipment.

● The Readme.TXT file provides additional information for setup and information that is not included in the instruction manual. Please read the file before installing the provided software program.

● You can find the latest information (in English) on the provided software program at our world wide web server at http://www.jvc-victor.co.jp/

MAJOR FEATURES

Two software programs are provided with the GV-CB3 JLIP package.

EN 5

JLIP Video Capture Software

Video Capture Facility

Video images from video source units such as camcorders or VCRs can be captured as 768 x 552 still images with 16.77 million colors through the serial port (RS-232C) of a WindowsT-operated computer.

JLIP Control Facility

With a JLIP compatible camcorder or VCR,

• all basic video operations can be executed via the computer display;

• Up to 99 images can be captured automatically with Program Video Capture (playing tape — scanning — transferring to PC)

Data Sharing With JLIP Video Producer Software

Data can be imported from the JLIP Video Producer Software. Data from the Video Capture Software can also be exported to the Video Producer Software for Program Playback or Assemble Editing.

JLIP Video Producer Software

JLIP Control Facility

With a JLIP-compatible camcorder, VCR or video printer (GV-PT2):

• all basic video operations can be executed on the computer display;

• allows programmed video playback (up to 99 programs) or assemble editing;

• print command can be issued to the GVPT2 video printer

Data Sharing with the Video Capture Software

Video Capture Software data can be exported to the Video Producer Software.

Assemble Editing

Selected scenes on a pre-recorded tape can be edited in a specified sequence.

Pre-recorded tape (on camcorder)

Recording tape (on VCR)

+ 9 hidden pages