Jvc GRSXM230, GRSX760 User Manual

COMPACT VHS CAMCORDER

GR-SXM330 GR-SX860 GR-AXM230 GR-AX760

S-VHS is compatible with GR-SXM330/SX860 only.

INSTRUCTIONS

For Customer Use:

Enter below the Model No. and Serial No. which is located on the bottom of cabinet. Retain this information for future reference.

Model No.

ENGLISH

CONTENTS

SAFETY PRECAUTIONS AUTOMATIC DEMONSTRATION PROVIDED ACCESSORIES

GETTING STARTED RECORDING

Basic Recording ..........................14

Basic Features ...........................16

Zooming, Picture Stabilizer, 5-Sec. Recording, Quick Review, Retake, Video Light

Advanced Features ......................18

Snapshot, Night-Alive, Fade/Wipe Effects, Program AE With Special Effects, Digital Effects, Using Menus For Detailed Adjustment, Date/Time Insert, Instant Titles, Animation, Time-Lapse, Exposure Control, Focusing, White Balance Adjustment, Manual White Balance Operation

PLAYBACK

Basic Playback ........................... 30

Features .................................. 31

Connections And Tape Dubbing ........ 32

Using The Cassette Adapter ........... 34

USING THE REMOTE CONTROL UNIT

(GR-SXM330 only)

Playback Zoom ..........................37

Animation And Time-Lapse.............37

Insert Editing ............................. 38

Audio Dubbing ...........................39

TROUBLESHOOTING DETAILS INDEX

Ter ms ......................................43

Controls, Connectors And Indicators ... 44

Indications ................................46

CAUTIONS SPECIFICATIONS ESPAÑOL FOR SERVICING (Only in U.S.A.) WARRANTY (Only in U.S.A.)

2 – 3

6 – 13

14 – 29

30 – 34

35 – 39

40 – 41

43 – 47

48 – 50

52 – 53

4 4

54 55

Serial No.

LYT0689-001A

2 EN

Dear Customer,

Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product.

Using This Instruction Manual

•All major sections and subsections are listed in the Table Of Contents on the cover.

•Notes appear after most subsections. Be sure to read these as well.

•Basic and advanced features/operation are separated for easier reference.

It is recommended that you . . .

.... refer to the Index (

.... read thoroughly the Safety Precautions and Safety Instructions that follow. They contain extremely

important information regarding the safe use of this product.

You are recommended to carefully read the cautions on pages 48 – 50 before use.

SAFETY PRECAUTIONS

Z pgs. 43 – 47) and familiarize yourself with button locations, etc. before use.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTIONS:

● This camcorder is designed to be used with NTSC-type color television signals. It cannot be used for playback with a television of a different standard. However, live recording and LCD monitor*/viewfinder playback are possible anywhere.

● Use the JVC BN-V11U/V12U/V20U/V400U battery packs and, to recharge them or to supply power to the camcorder from an AC outlet, use the provided multi-voltage AC Adapter. (An appropriate conversion adapter may be necessary to accommodate different designs of AC outlets in different countries.)

*Models equipped with LCD monitor only.

ATTENTION:

The product that you have purchased is powered by a rechargeable battery. The battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal.

WARNING: TO REDUCE THE RISK OF FIRE

OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

NOTES:

●

The rating plate (serial number plate) and safety caution are on the bottom and/or the back of the main unit.

●

The rating information and safety caution of the AC Adapter are on its upper and lower sides.

Cassettes marked

and can be used with this camcorder.

EN3

The EPA certified RBRC® Battery Recycling Seal on the nickel-cadmium (Ni-Cd) battery indicates JVC is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States. The RBRC alternative to placing used Ni-Cd batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call 1-800-8-BATTERY™ for information on Ni-Cd battery recycling and disposal bans/restrictions in your area. JVC’s involvement in this program is part of our commitment to preserving our environment and conserving our natural resources.

When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm (3-15/16") or more on both sides, on top and at the rear).

Do not block the ventilation holes. (If the ventilation holes are blocked by a newspaper, or cloth etc. the heat may not be able to get out.)

No naked flame sources, such as lighted candles, should be placed on the apparatus. When discarding batteries, environmental problems must be considered and the local rules or laws

governing the disposal of these batteries must be followed strictly. The apparatus shall not be exposed to dripping or splashing. Do not use this equipment in a bathroom or places with water.

Also do not place any containers filled with water or liquids (such as cosmetics or medicines, flower vases, potted plants, cups etc.) on top of this unit. (If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)

program provides a convenient

IMPORTANT SAFETY INSTRUCTIONS

(1) Read these instructions. (2) Keep these instructions. (3) Heed all warnings. (4) Follow all instructions. (5) Do not use this apparatus near water. (6) Clean only with dry cloth. (7) Do not block any ventilation openings.

Install in accordance with the manufacturer’s instructions.

(8) Do not install near any heat sources such

as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

(9) Only use attachments/accessories specified

by the manufacturer.

(10) Use only with the cart,

stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

(11) Unplug this apparatus during lightning

storms or when unused for long periods of time.

(12) Refer all servicing to qualified service

personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

4 EN

AUTOMATIC DEMONSTRATION

Automatic Demonstration takes place when “DEMO MODE” is set to “ON” (factory-preset).

Available when the Power Switch is set to “ ” or “ ”.

Operating the Power Zoom Lever during the demonstration stops the demonstration temporarily. If the Power Zoom Lever is not moved for more than 1 minute after that, the demonstration will resume.

“DEMO MODE” remains “ON” even if the camcorder power is turned off.

To cancel Automatic Demonstration, set the Power Switch to “ ” and press the MENU Wheel in while the demo is in progress. This takes you directly to the demo mode’s Setting Menu (so you will not have to go through the main Menu Screen). Rotate the MENU Wheel to select “OFF” and press it.

NOTES:

When a tape whose Erase Protection tab is in the position that allows recording is loaded in the

●

camcorder, demonstration is not available.

●

If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration activated on the LCD monitor or viewfinder.

PROVIDED ACCESSORIES

XFIT

DEMO MODE

Setting Menu

•AC Adapter AP-V10U

•Battery Pack BN-V11U

•Shoulder Strap

•Lens Cap

•Cassette Adapter (VHS Playpak) C-P7U

•Remote Control Unit RM-V715U (GR-SXM330 only)

•AAA (R03) Battery x 2 (for Remote Control Unit, GR-SXM330 only)

•AA (R6) Battery (for Cassette Adapter)

How To Attach The Lens Cap

To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration.

132

EN5

6 EN

Hook on.

BATTERY RELEASE Switch

REFRESH Button

REFRESH Lamp

CHARGE Lamp

Push in.

GETTING STARTED

Power

This camcorder’s 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment.

CHARGING THE BATTERY PACK

Make sure the battery pack is attached to the

camcorder. Hook its end to the camcorder push the battery in until it locks in place

•If the battery pack is attached in the wrong position, a malfunction may occur.

Set the Power Switch to “OFF”. Connect the AC

Adapter to the camcorder

Plug the AC Adapter into an AC outlet 4.

The CHARGE lamp on the camcorder blinks to indicate charging has started.

1 and

Battery pack

Power Switch

To DC IN

To AC outlet

Battery pack

BN-V11U BN-V12U (optional) BN-V20U (optional) BN-V400U (optional)

REFRESH:

Charging a battery with some charge remaining reduces that battery’s capacity. Perform the procedure below to fully discharge the battery pack before recharging.

1. Perform steps 1 through 3 of “CHARGING THE BATTERY PACK”.

2. Press REFRESH on the camcorder for over 2 seconds. The REFRESH lamp on the camcorder blinks to

indicate discharging has started.

3. When discharging is finished, charging automatically starts and the CHARGE lamp blinks. When you are not using a battery pack for a long period of time, be sure to fully discharge it before storing

because leaving a battery with some charge left over also reduces performance.

AC Adapter

approx. 1 hr. 30 min. approx. 1 hr. 30 min. approx. 2 hrs. 20 min. approx. 4hrs. 30 min.

connector

Charging time

When the CHARGE lamp stops blinking but stays lit,

charging is finished. Unplug the AC Adapter from the AC outlet. Disconnect the AC Adapter from the camcorder.

To Detach The Battery Pack . . .

.... slide BATTERY RELEASE and pull out the battery pack.

NOTES:

●

During charging or discharging, the camcorder cannot be operated.

●

Charging and discharging is not possible if the wrong type of battery is used.

●

When charging the battery pack for the first time or after a long storage period, the CHARGE lamp may not light. In this case, remove the battery pack from the camcorder, then try charging again.

●

If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced. Please purchase a new one.

●

Using the optional AA-V15 AC Power Adapter/Charger, you can charge the BN-V11U/V12U/V20U/V400U battery pack without the camcorder. However, it cannot be used as an AC adapter.

For other notes, Z pg. 42

ATTENTION:

Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction.

Charge marker

A charge marker is provided on the battery pack to help you remember whether it has been charged or not. Two colors are provided (red and black)—you choose which one means charged and which means discharged.

USING THE BATTERY PACK

Perform step 1 of “CHARGING THE BATTERY PACK”

Z pg. 6).

(

Approximate recording time (unit: min.)

Battery pack

Viewfinder on

BN-V11U

BN-V12U (optional)

BN-V20U (optional)

BN-V400U (optional)

95 100

(50)

95 100

(50) 150 165

(85) 360 385

(205)

1 When using models equipped with LCD monitor 2 When using GR-SX860/AX760

( ) : when the video light is on

(GR-SXM330/AXM230 only)

NOTES:

Recording time is reduced significantly under the

●

following conditions:

•

Zoom or Record-Standby mode is engaged repeatedly.

•

The LCD monitor is used repeatedly (models equipped with LCD monitor only).

●

Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.

LCD monitor on

(45)

(45) 135

(75) 315

(190)

EN7

To AC outlet

AC Adapter

To DC IN connector

USING AC POWER

Use the AC Adapter (connect as shown in the illustration).

NOTES:

The provided AC Adapter features automatic voltage

●

selection in the AC range from 110 V to 240 V.

●

For other notes, Z pg. 42.

8 EN

PAUSE

180°180

GETTING STARTED

(cont.)

Grip Adjustment

Power Zoom Lever

Separate the Velcro strip.

Recording Start/Stop Button

Pass your right hand through the loop and grasp the

grip.

Adjust so that your thumb and fingers can easily

operate the Recording Start/Stop Button and Power Zoom Lever. Refasten the Velcro strip.

Viewfinder Adjustment

Set the Power Switch to “ ” or “ ”.

Set to “ “

”.

” or

Adjust the viewfinder manually for best viewability.

Turn the Diopter Adjustment Control until the

indications in the viewfinder are clearly focused.

Shoulder Strap Attachment

Following the illustration, thread the strap through the

Tripod Mounting

CAUTION:

When using a tripod, be sure to open and extend its legs fully to Stabilize the camcorder. To prevent damage to the unit caused by falling over, do not use a small-sized tripod.

1, then fold it back and thread it through the

eyelet buckle

2. Repeat the procedure to attach the other

end of the strap to the other eyelet the strap is not twisted.

Adjust as shown in the illustration 4.

Align the screw and camera direction stud on the tripod with the camera’s mounting socket and stud hole. Then tighten the screw.

3, making sure

EN9

F E

O X .

C P W

U O .

S S B

EERMAMMEE

A A A

U U U

U T

T T

O O O

R D

E .

ECXZT

M O

S O

D M

SETEM ME

S 5

N P

MENU Wheel

Power Switch

Display

Menu Screen

MMEEN

GM.

GFLISH

Date/Time Settings

Set the Power Switch to “ ”. The power lamp comes on.

Press the MENU Wheel in. The Menu Screen

appears.

Rotate the MENU Wheel to select “ TO SYSTEM

MENU” and press it to display SYSTEM MENU. Rotate the MENU Wheel to select “

NEXT” and

press it to display the next page.

Rotate the MENU Wheel to select “DATE/TIME” and

press it. The DATE/TIME Menu appears.

To set “YEAR”, “MONTH”, “DAY” or “TIME” (hour/ minute), rotate the MENU Wheel to select the desired

item, and press it. When the setting begins blinking, rotate the MENU Wheel until the correct setting appears and then press it. The setting stops blinking.

When none of these settings (“YEAR”, “MONTH”,

“DAY”, “TIME”) blinks, rotate the MENU Wheel to select “EXIT”, and press it. The Menu Screen reappears with the highlight bar on “ RETURN”.

Press the MENU Wheel in to close the Menu Screen.

NOTE:

To display the date and time in the camcorder’s display and on a connected TV, see “Date/Time Insert” (

pg. 25).

DATE/TIPMME

280

DATE/TIME Menu

12-hour indication with AM or PM

For other notes, Z pg. 42

10 EN

MENU Wheel

GETTING STARTED

(cont.)

Recording Format Setting

(GR-SXM330/SX860 only)

Set the recording format according to the format of the tape used or type of recording you wish to perform.

Set the Power Switch to “ ”. The power lamp

comes on.

Press the MENU Wheel in. The Menu Screen

appears.

Power Switch

Display: when a VHS cassette is loaded.

R D W

T D

R D W S T D

–

FXF

–

M O

Z E

E P

O E H

S E P

NTGETMH

E Y

S–VHS E T

M E

NTGETMH

N 3

N P

N 3

Menu Screen

When an S-VHS cassette is loaded: S-VHS

Setting Menu

Rotate the MENU Wheel to select “ TO SYSTEM MENU” and press it to display SYSTEM MENU.

If a VHS cassette is loaded . . .

.... rotate the MENU Wheel to select “S-VHS ET”,

then press it. The S-VHS ET Setting Menu appears.

If an S-VHS cassette is loaded . . .

.... rotate the MENU Wheel to “S-VHS”, then press it.

The S-VHS Setting Menu appears.

Rotate the MENU Wheel to set to either of the

parameters, then press it. The Menu Screen reappears with the highlight bar on “

RETURN”.

In the S-VHS ET Setting Menu,

ON : Records with S-VHS picture quality on a VHS

cassette (factory-preset). This is called Super VHS ET (Expansion Technology).

OFF: Records in VHS.

In the S-VHS Setting Menu,

ON : Records in S-VHS on an S-VHS cassette

(factory-preset).

OFF: Records in VHS on an S-VHS cassette.

Press the MENU Wheel in to close the Menu Screen.

•When the S-VHS ET mode is engaged, “S-ET” is displayed.

•During S-VHS record mode, “S“ is displayed.

•When S-VHS ET or S-VHS recording starts, “S-VHS REC” is displayed for approx. 3 seconds.

NOTE:

If a cassette is not loaded, “S-VHS” will be displayed in the Menu Screen.

Normal Screen

EN11

NOTES about S-VHS and S-VHS ET

JVC EHG (Extra High Grade) tapes are recommended for superior results. Use S-VHS tape for storing recordings for an extended period or for recording important scenes, as it enables higher-quality recording and playback.

With some tapes, better picture quality may not be obtained even with S-VHS ET recording. It is recommended that you do test record beforehand to make sure whether better results can be obtained.

If the S-VHS ET mode or recording format is switched during recording, the playback picture will be blurred at the switching point.

It is recommended that tapes recorded in the SP mode on this camcorder be played back on this camcorder.

Noise may appear on-screen when tapes recorded in the EP mode are played back.

Tapes recorded in S-VHS or S-VHS ET mode can be played back not only on this camcorder but also on a Super VHS VCR or a VCR equipped with the SQPB (S-VHS QUASI PLAYBACK) function.

— When tapes recorded in S-VHS or S-VHS ET mode are played back on a VCR equipped with the

SQPB (S-VHS QUASI PLAYBACK) function, S-VHS picture quality is not available.

— Tapes recorded in S-VHS ET mode cannot be played back on some VCRs, including some JVC VCRs

(eg: HR-S6600U, HR-SC1000U, etc.).

Tapes recorded in S-VHS or S-VHS ET mode cannot be played back correctly on a normal VHS VCR.

You can play back S-VHS ET recordings not only on this camcorder but also on another VHS VCR equipped with S-VHS ET.

— It is recommended to specifically label S-VHS ET recordings so you can easily distinguish them from

regular VHS recordings.

S-VHS ET does not work with S-VHS tapes.

To avoid on-screen noise, do not perform Still Playback or Shuttle Search repeatedly.

If the picture contains a lot of jitter or noise, use a cleaning cassette.

Compatibility Between S-VHS And VHS

Recording Playback

Blank tape Camcorder Recorded tape

S-VHS-C cassette

VHS-C cassette

S-VHS recordings

VHS recordings

Cassette adapter

S-VHS ET recordings

S-VHS VCR

VHS VCR with SQPB

function

•The recorded format (S-VHS or VHS) is automatically detected when playback begins.

Regular VHS VCR

•S-VHS recorded tapes cannot be viewed on regular VHS VCRs, other than those equipped with the SQPB (S-VHS QUASI PLAYBACK) function.

12 EN

XIT

Display

REC MODE

MENU Wheel

Power Switch

REC MODE Menu

Recording mode indicator

GETTING STARTED

(cont.)

Recording Mode Setting

Set the tape recording mode depending on your preference.

Set the Power Switch to “ ”. The power lamp

comes on.

Press the MENU Wheel in. The Menu Screen appears.

Rotate the MENU Wheel to select “ TO SYSTEM

MENU” and press it to display SYSTEM MENU.

Rotate the MENU Wheel to select “REC MODE” and press it. The REC MODE Menu appears. Select “SP”

or “EP” by rotating the MENU Wheel and press it. The Menu Screen reappears with the highlight bar on “

RETURN”. Press the MENU Wheel in to close the

Menu Screen.

•“EP” (Extended Play) is more economical, providing three times the recording time.

NOTE:

If the recording mode is switched during recording, the playback picture will be blurred at the switching point.

Display

TAPE LENGTH

TAPE LENGTH Menu

Tape length indicator

Tape Length Setting

Set the tape length according to the length of the tape used.

Perform steps 1 through 3 above.

Rotate the MENU Wheel to select “TAPE LENGTH”, then press it. The TAPE LENGTH Menu appears.

Rotate the MENU Wheel to select the correct tape

length setting.

•T20=20 minutes

•T30=30 minutes

•T35=35 minutes

•T40=40 minutes

(in SP)

Press the MENU Wheel in. The Menu Screen reappears with the highlight bar on “

Press the MENU Wheel in to close the Menu Screen.

NOTE:

The tape remaining time (Z pg. 14) is correct only if the correct tape length has been selected.

RETURN”.

Cassette holder

Close Button

EJECT Switch

Loading/Unloading A Cassette

Open the LCD monitor fully (models equipped with LCD monitor only).

Slide EJECT until the cassette holder opens. Do not

use force to open.

Insert or remove a cassette. When inserting, make

sure the label is facing outward.

Press the Close button to close the cassette holder

until it locks into place.

Close the LCD monitor (models equipped with LCD

monitor only).

EN13

EJECT Switch

Cassette holder

Close Button

Erase Protection tab Gear

Turn to take up slack.

NOTES:

●

Closing the LCD monitor while the cassette holder is still open may cause damage to the LCD monitor (models equipped with LCD monitor only).

●

The cassette holder can’t be opened unless a power supply is attached.

●

Make sure that the tape is not slack when loading the cassette. If there is any slack, turn the gear on the cassette in the direction of the arrow to take up the slack.

●

Make sure the Erase Protection tab is in the position that allows recording. If not, slide the tab. Some cassettes have removable tabs. If the tab has been removed, cover the hole with adhesive tape.

●

The cassette holder cannot be opened while the camcorder is in the record mode.

14 EN

BR I GHT

–

–––––––6–––

MIN

RECORDING

NOTE:

You should already have performed the procedures listed below. If not, do so before continuing.

●

Power (Z pg. 6)

●

Load A Cassette (Z pg. 13)

●

Recording Mode Setting (Z pg. 12)

●

Tape Length Setting (Z pg. 12)

●

Grip Adjustment (Z pg. 8)

●

Viewfinder Adjustment (Z pg. 8)

Basic Recording

During shooting

Power Switch

Recording Start/Stop Button

Tape remaining time indicator (Approximate)

MIN 119MIN

(Now calculating)

(Blinking) (Blinking) (Blinking)

180°

To Adjust The Brightness Of The LCD Monitor

.... rotate the BRIGHT Wheel until the bright

level indicator on the display moves and the appropriate brightness is reached.

120MIN

1MIN0MIN

BRIGHT Wheel (models equipped with LCD monitor only)

90°

2MIN

3MIN

Shooting While Watching The Viewfinder

Make sure the LCD monitor is closed and locked

(models equipped with LCD monitor only). Press in the tabs on the lens cap to remove it. Set the Power Switch to “ the camcorder enters the Record-Standby mode. “PAUSE” is displayed in the viewfinder.

Press the Recording Start/Stop Button. “ ” appears

in the viewfinder while recording is in progress.

To Stop Recording . . .

.... press the Recording Start/Stop Button. The camcorder

re-enters the Record-Standby mode.

” or “ ”. The power lamp lights and

Shooting While Watching The LCD Monitor

Make sure the LCD monitor is fully open. Press in the tabs on the lens cap to remove it. Set the Power

Switch to “ the camcorder enters the Record-Standby mode. “PAUSE” is displayed in the LCD monitor.

Tilt the LCD monitor upward/downward for best

viewability and press the Recording Start/Stop Button. “ in progress.

NOTE:

When you use the LCD monitor outdoors in direct sunlight, the LCD monitor may be difficult to see. If this happens, use the viewfinder instead.

To Stop Recording . . .

.... press the Recording Start/Stop Button. The camcorder

re-enters the Record-Standby mode.

(models equipped with LCD monitor only)

” or “ ”. The power lamp lights and

” appears in the LCD monitor while recording is

: Suitable for standard recording using NO special effects or manual adjustments. : Allows you to set recording functions using the menus for more creative capabilities.

OFF : Switches off the camcorder.

: Allows you to play back your recordings.

Power Switch Position

EN15

NOTES:

●

If the Record-Standby mode continues for 5 minutes without performing Zoom or any other operations, the camcorder’s power shuts off automatically. Set the Power Switch to “OFF”, and then back to “ turn the camcorder on again.

●

If you are recording on a cassette from the middle (such as when a tape is removed and re-inserted during recording), use the Retake function ( of it.

●

To remove the indications from the camcorder’s display during recording, Z pg. 22, 24.

pg. 17) to find the end of the last recording so you do not erase any

Self-Recording

” or “ ” to

JOURNALISTIC SHOOTING (models

equipped with LCD monitor only)

In some situations, different shooting angles may provide more dramatic results. Hold the camcorder in the desired position and tilt the LCD monitor in the most convenient direction. It can rotate 270° (90° downward, 180° upward).

SELF-RECORDING (models equipped with

LCD monitor only)

You can shoot yourself while viewing your own image in the LCD monitor. Open the LCD monitor and tilt it upward 180° so that it faces forward, then point the lens toward yourself and start recording.

For other notes, Z pg. 42

16 EN

Zoom in (T: Telephoto)

RETAKE (2/3) Button

Display

Picture Stabilizer indicator

PAUSE

Zoom out (W: Wide angle)

LIGHT OFF/AUTO/ON Switch (GR-SXM330/ AXM230 only)

5 SEC. REC Button (GR-SX860/ AXM230/AX760 only)

Power Zoom Lever

P. STABILIZER Button

Zoom indicator bar

Zoom level indicator

Approximate zoom ratio

RECORDING

Basic Features

Zooming: To produce the zoom in/out effect, or an

instantaneous change in image magnification. Digital circuitry extends the maximum magnification offered by optical zoom. This system is called Digital Zoom.

Zoom In Slide the Power Zoom Lever towards “T”.

Zoom Out Slide the Power Zoom Lever towards “W”.

●

The further you slide the Power Zoom Lever, the quicker the zoom action.

●

Focusing may become unstable during Zooming. In this case, set the zoom while in Record–Standby, lock the focus by using the manual focus ( zoom in or out in Record mode.

●

The zoom level indicator

(5)

Once the zoom level indicator reaches the top of the zoom indicator bar, all magnification from that point is through digital processing.

●

When using Digital Zoom, the quality of image may suffer. To deactivate Digital Zoom, set “D.ZOOM” to “OFF” in SYSTEM MENU (

●

Digital zoom cannot be used when the “VIDEO ECHO” mode (

pg. 21) is activated (GR-SXM330

only).

Picture Stabilizer:

images caused by camera-shake, particularly at high magnification.

1) Press P. STABILIZER. “

2) To switch off the Picture Stabilizer, press P. STABILIZER. The indicator disappears.

●

Accurate stabilization may not be possible if hand shake

To compensate for unstable

” appears.

is excessive, or under the following conditions:

•

When shooting subjects with vertical or horizontal stripes.

•

When shooting dark or dim subjects.

•

When shooting subjects with excessive backlighting.

•

When shooting scenes with movement in various directions.

•

When shooting scenes with low-contrast backgrounds.

●

Switch off the Picture Stabilizer when recording with the camcorder on a tripod.

●

The “ ” indicator appears blinking if the Stabilizer cannot be used.

●

This function cannot be activated during the “Night-Alive” ( and “VIDEO ECHO” mode (

pg. 18), “CLASSIC FILM”, “STROBE”

only).

pg. 28), then

moves during zoom.

pg. 23).

pg. 21) (GR-SXM330

5 Sec. Rec mode indicator (GR-SX860/AXM230/AX760 only)

5Sec. Rec (5-Sec. Recording)

(GR-SX860/AXM230/AX760 only):

To record a scene for 5 seconds, providing quick scene transitions like those seen in TV programs.

1) Make sure the recording mode is set to “SP”.

2) During Record–Standby, press 5SEC. REC.

“

5S” appears and 5Sec. Rec is reserved.

3) Press the Recording Start/Stop Button. Recording

starts, and after 5-second recording is finished, the camcorder reenters the Record–Standby mode automatically.

4) To cancel the 5Sec. Rec. function, press 5SEC. REC again so that “

●

Fade/Wipe (Z pg. 19) cannot be activated by pressing 5SEC. REC.

Quick Review:

recording.

1) Make sure the camcorder is in the Record–Standby mode.

2) Press

Tape is rewound for approx. 2 second and played back automatically, then pauses in Record– Standby mode for the next shot.

●

Distortion may occur at the start of playback. This is normal.

Retake:

1) Make sure the camcorder is in the Record–Standby mode.

2) Press and hold either RETAKE to reach the start point for new recording. Pressing tape and pressing

3) Press the Recording Start/Stop Button to start recording.

●

Noise bars appear and pictures may become monochrome or darken during Retake. This is normal.

and release quickly.

To re-record certain segments.

5S” disappears.

To check the end of the last

reverses it.

forwards the

EN17

Video Light

(GR-SXM330/AXM230 only): To brighten the

scene when natural lighting is too dim.

1) Set LIGHT OFF/AUTO/ON as required: OFF : Turns off the light. AUTO : Automatically turns on the light when the

ON : Always keeps the light on as long as the

●

camcorder senses insufficient lighting on the subject.

camcorder is turned on.

The video light can only be used with the camcorder’s power on. It is recommended to set the white balance

pg. 29) to

( When not using the video light, turn it off to save battery power. Even if the battery indicator if the battery pack’s charge is low, the camcorder may turn off automatically when you turn on the video light, or when you start recording with the video light turned on. When LIGHT OFF/AUTO/ON is set to “AUTO”:

•

Depending on the lighting conditions, the video light may keep turning on and off. In this case, manually switch the light on or off using LIGHT OFF/AUTO/ON.

•

While the “Sports” or “High Speed Shutter” mode ( to stay on.

•

While the “Twilight” mode (Z pg. 20) is engaged, the light will not activate.

when you use the video light.

( )

does not blink

pg. 20) is engaged, the light is likely

DANGER

n The video light can become extremely hot. Do

not touch it either while in operation or soon after turning it off, otherwise serious injury may result.

n Do not place the camcorder into the carrying

case immediately after using the video light, since it remains extremely hot for some time.

n When operating, keep a distance of about

30 cm (11-13/16") between the video light and people or objects.

n Do not use near flammable or explosive

materials.

n It is recommended that you consult your

nearest JVC dealer for replacing the video light.

+ 39 hidden pages