Jvc GRDVL910, GRDVL313 User Manual

DIGITAL VIDEO CAMERA

GR-D VL910A GR-D VL510A GR-D VL450A GR-D VL313A

ENGLISH

CONTENTS

AUTOMATIC DEMONSTRATION

GETTING STARTED VIDEO RECORDING &

PLAYBACK

VIDEO RECORDING............16 – 20

VIDEO PLAYBACK.............. 2 1 – 24

DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK

D.S.C. RECORDING ............26 – 27

D.S.C. PLAYBACK .............. 28 – 3 6

7 – 14

15 – 24

25 – 36

GR-D VL310A GR-D VL210A GR-D VL910EA GR-D VL510EA GR-D VL210EA

Please visit our Homepage on the World Wide Web and answer our Consumer Survey (in English only):

http://www.jvc-victor.co.jp/english/index-e.html

The camcorder illustrations appearing in this instruction manual are of the GR-DVL910A.

ADVANCED FEATURES

FOR RECORDING ................38 – 45

USING MENUS FOR

DETAILED ADJUSTMENT......46 – 51

DUBBING ......................... 52 – 5 6

USING THE REMOTE

CONTROL UNIT ................57 – 67

SYSTEM CONNECTIONS ........68 – 69

REFERENCES

DETAILS ...................................71

TROUBLESHOOTING ............72 – 76

USER MAINTENANCE ...................77

INDEX .............................78 – 84

CAUTIONS ........................85 – 8 7

TERMS ............................88 – 8 9

SPECIFICATIONS .................90 – 91

The D.S.C. (Digital Still Camera) features are available on GR-DVL910A, GR-DVL510A, GR-DVL910EA and GR-DVL510EA.

37 – 69

70 – 91

INSTRUCTIONS

LYT0768-001A

2 EN

Dear Customer,

Thank you for purchasing this digital video camera. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product.

Using This Instruction Manual

•All major sections and subsections are listed in the Table Of Contents on the cover page.

•Notes appear after most subsections. Be sure to read these as well.

•Basic and advanced features/operation are separated for easier reference.

It is recommended that you . . .

.... refer to the Index (墌 pgs. 78 – 84) and familiarize yourself with button locations, etc. before use.

.... read thoroughly the Safety Precautions. They contain extremely important information regarding the safe

use of this product.

You are recommended to carefully read the cautions on pages 85 through 87 before use.

SAFETY PRECAUTIONS

WARNING: TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTIONS:

䡲 If you notice smoke or a peculiar smell coming

from the camcorder or AC adapter, shut it down and unplug it immediately. Continue using the camcorder or AC adapter under these conditions could lead to fire or electric shock. Contact your JVC dealer. Do not attempt to repair the malfunction yourself.

䡲 To prevent shock, do not open the cabinet. No

user serviceable parts inside. Refer servicing to qualified personnel.

䡲 When you are not using the AC Adapter for a

long period of time, it is recommended that you disconnect the power cord from AC outlet.

NOTES:

●

The rating plate (serial number plate) and safety caution are on the bottom and/or the back of the main unit.

●

The rating information and safety caution of the AC Adapter are on its upper and lower sides.

CAUTION:

To avoid electric shock or damage to the unit, first firmly insert the small end of the power cord into the AC Adapter until it is no longer wobbly, and then plug the larger end of the power cord into an AC outlet.

EN3

CAUTIONS:

● This camcorder is designed to be used with PAL-type colour television signals. It cannot be used for playback with a television of a different standard. However, live recording and LCD monitor/viewfinder playback are possible anywhere.

● Use the JVC BN-V408U/V416U/V428U battery packs and, to recharge them or to supply power to the camcorder from an AC outlet, use the provided multi-voltage AC Adapter and Power Cord. (An appropriate conversion adapter may be necessary to accommodate different designs of AC outlets in different countries.)

When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear).

Do not block the ventilation holes. (If the ventilation holes are blocked by a newspaper, or cloth etc. the heat may not be able to get out.)

No naked flame sources, such as lighted candles, should be placed on the apparatus.

When discarding batteries, environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly.

The apparatus shall not be exposed to dripping or splashing.

Do not use this equipment in a bathroom or places with water. Also do not place any containers filled with water or liquids (such as cosmetics or medicines, flower vases, potted plants, cups etc.) on top of this unit. (If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)

4 EN

Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as lead to the malfunctioning of internal circuitry. There is also a risk of fire or electric shock.

CAUTION!

The following notes concern possible physical damage to the camcorder and to the user.

When carrying, be sure to always securely attach and use the provided shoulder strap. Carrying or holding the camcorder by the viewfinder and/or the LCD monitor can result in dropping the unit, or in a malfunction.

Take care not to get your finger caught in the cassette holder cover. Do not let children operate the camcorder, as they are particularly susceptible to this type of injury.

Do not use a tripod on unsteady or unlevel surfaces. It could tip over, causing serious damage to the camcorder.

CAUTION!

Connecting cables (Audio/Video, S-Video, etc.) to the camcorder and leaving the unit on top of the TV is not recommended, as tripping on the cables will cause the camcorder to fall, resulting in damage.

䡲 This camcorder is designed exclusively for the digital video cassette, SD Memory Card and

MultiMediaCard. Only cassettes marked “

“

” can be used with this unit.

” and memory cards* marked “ ” or

Before recording an important scene . . .

.... make sure you only use cassettes with the Mini DV mark .

.... make sure you only use memory cards* with the mark

.... remember that this camcorder is not compatible with other digital video formats.

.... remember that this camcorder is intended for private consumer use only. Any commercial use

without proper permission is prohibited. (Even if you record an event such as a show, performance or exhibition for personal enjoyment, it is strongly recommended that you obtain permission beforehand.)

*Memory cards can be used with GR-DVL910A/DVL510A/DVL910EA/DVL510EA only.

or .

PROVIDED ACCESSORIES

EN5

•AC Adapter AP-V10A (GR-DVL910A/DVL510A/ DVL450A/DVL313A/ DVL310A/DVL210A) AP-V10EA (GR-DVL910EA/ DVL510EA/DVL210EA)

•Memory Card (8 MB)

•Core Filter x 2 (GR-DVL210A/DVL210EA only) (for optional S-Video cable and PC Connection cable provided with optional HS-V16KIT software) 墌 pg. 6 for attachment

•Core Filter x 1 (GR-DVL450A/DVL313A/ DVL310A only) (for optional S-Video cable)

墌 pg. 6 for attachment

•USB Cable (GR-DVL910A/DVL510A/ DVL910EA/DVL510EA only)

•Remote Control Unit RM-V717U

•Power Cord

(GR-DVL910A/DVL510A/ DVL910EA/DVL510EA only) (Already inserted in the camcorder)

•Battery Pack BN-V408U

•Shoulder Strap

•Editing Cable GR-DVL450A/DVL313A/DVL310A:

One plug has 3 rings around the pin, and the other has 1 ring around the pin.

GR-DVL910A/DVL510A/DVL210A/ DVL910EA/DVL510EA/DVL210EA: Both plugs have 1 ring around the pin.

•AAA (R03) Battery x 2 (for remote control unit)

•Lens Cap (Already attached to the camcorder)

•CD-ROM (GR-DVL910A/DVL510A/ DVL450A/DVL313A/ DVL310A/DVL910EA/ DVL510EA only)

•PC Connection Cable (GR-DVL450A/DVL313A/ DVL310A only)

NOTE:

In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.

•Audio/Video Cable (ø3.5 mini-plug to RCA plug)

6 EN

MODEDEMO –ONOFF

How To Attach The Core Filter

Attach the Core Filter(s) (if provided with your model 墌 pg. 5) to an optional cable(s). The Core Filter reduces interference.

12 3

Stopper

Release the stoppers on both ends of the Core Filter.

䡲 When connecting cables, attach the end with the Core Filter to the camcorder.

Run the cable through the Core Filter, leaving approx. 3 cm of cable between the cable plug and the Core Filter. Wind the cable once around the outside of the Core Filter as shown in the illustration.

•Wind the cable so that it is not slack.

NOTE:

Take care not to damage the cable.

3 cm

Wind once

Close the Core Filter until it clicks shut.

AUTOMATIC DEMONSTRATION

Automatic Demonstration takes place when “DEMO MODE” is set to “ON” (factory-preset).

䡲 Available when the Power Switch is set to “ ” or “ ” and no

cassette is in the camcorder.

䡲 Performing any operation during the demonstration stops the

demonstration temporarily. If no operation is performed for more than 1 minute after that, the demonstration will resume.

䡲 “DEMO MODE” remains “ON” even if the camcorder power is

turned off.

䡲 To cancel Automatic Demonstration:

1. Set the Power Switch to “ ” while pressing down the Lock Button located on the switch and press the MENU/BRIGHT wheel in. The Menu Screen appears.

2. Rotate the MENU/BRIGHT wheel to select “ SYSTEM” and press it. The SYSTEM Menu appears.

3. Rotate the MENU/BRIGHT wheel to select “DEMO MODE” and press it. The Sub Menu appears.

4. Rotate the MENU/BRIGHT wheel to select “OFF” and press it.

5. Rotate the MENU/BRIGHT wheel to select “

press it twice. The normal screen appears.

NOTE:

If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration activated on the LCD monitor or viewfinder.

RETURN”, and

MENU/BRIGHT Wheel

Lock Button

Power Switch

Sub Menu

GR-DVL910A/DVL510A/ DVL910EA/DVL510EA only

GETTING ST ARTED

EN7

GETTING STARTED

CONTENTS

Power.................................................. 8 – 9

Grip Adjustment ......................................... 10

Viewfinder Adjustment.................................. 10

Shoulder Strap Attachment ............................. 10

T ripod Mounting.......................................... 10

Date/Time Settings...................................... 11

Loading/Unloading A Cassette ......................... 12

Recording Mode Setting................................. 13

Loading A Memory Card

(GR-DVL910A/DVL510A/DVL910EA/DVL510EA only) ........ 14

Picture Quality Mode Setting

(GR-DVL910A/DVL510A/DVL910EA/DVL510EA only) ........ 14

8 EN

AC Adapter

To AC outlet

Battery pack

BN-V408U

BN-V416U (optional)

BN-V428U (optional)

BAT. RELEASE Switch

Power Switch

CHARGE Lamp

Battery pack

To DC

connector

Charging time

approx. 1 hr. 30 min.

approx. 2 hrs.

approx. 3 hrs. 20 min.

GETTING ST ARTED

(cont.)

Power

This camcorder’s 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment.

CHARGING THE BATTERY PACK

Tilt the viewfinder upward 1. With the arrow on the

battery pack pointing downward, push the battery pack slightly against the battery pack mount 2, then slide down the battery pack until it locks in place 3.

Set the Power Switch to “OFF”. Connect the AC

Adapter to the camcorder 4, then connect the Power Cord to the AC Adapter 5.

Plug the Power Cord into an AC outlet 6.

The CHARGE lamp on the camcorder blinks to indicate charging has started.

When the CHARGE lamp stops blinking but stays lit,

charging is finished. Unplug the Power Cord from the AC outlet. Disconnect the AC Adapter from the camcorder.

To Detach The Battery Pack . . .

.... slide BAT . RELEASE and pull out the battery pack.

NOTES:

●

If the protective cap is attached to the battery pack, remove it first.

●

During charging, the camcorder cannot be operated.

●

Charging is not possible if the wrong type of battery is used.

●

When charging the battery pack for the first time or after a long storage period, the CHARGE lamp may not light. In this case, remove the battery pack from the camcorder, then try charging again.

●

If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced. Please purchase a new one.

●

Using the optional AA-V40 AC Power Adapter/Charger, you can charge the BN-V408U/V416U/V428U battery pack without the camcorder. However, it cannot be used as an AC adapter.

For other notes, 墌 pg. 71

EN9

ATTENTION:

Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction.

NOTES:

●

Recording time is reduced significantly under the following conditions:

•

Zoom or Record-Standby mode is engaged repeatedly.

•

The LCD monitor is used repeatedly.

•

The playback mode is engaged repeatedly.

●

Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.

INFORMATION:

The extended-use battery pack kit is a set composed of a battery pack and AC Power Adapter/Charger: VU-V840 KIT : BN-V840U battery pack & AA-V15 AC Power Adapter/Charger VU-V856 KIT : BN-V856U battery pack & AA-V80 AC Power Adapter/Charger Read the kit's instruction manual before using. Neither BN-V840U nor BN-V856U can be charged by using the AC Adapter provided with this camcorder. Use only the AA-V15 AC Power Adapter/Charger for BN-V840U battery pack and only AA-V80 AC Power Adapter/Charger for BN-V856U battery pack. Also, by using the optional JVC VC-VBN856U DC Cord, it will be possible to connect BN-V840U or BN-V856U battery packs to the camcorder and supply power directly to the camcorder.

USING THE BATTERY PACK

Perform step 1 of “CHARGING THE BATTERY PACK” (墌 pg. 8).

Approximate recording time

Battery pack

BN-V408U

BN-V416U (optional)

BN-V428U (optional)

BN-V840U (optional)

BN-V856U (optional)

( ) : when the video light is on

LCD monitor on

1 hr.

(35 min.)

2 hrs.

(1 hr. 10 min.)

3 hrs. 30 min.

(2 hrs.)

5 hrs.

(2 hrs. 55 min.)

7 hrs.

(4 hrs.)

Viewfinder on

1 hr. 15 min.

(40 min.)

2 hrs. 30 min. (1 hr. 20 min.)

4 hrs. 20 min.

(2 hrs. 20 min.)

6 hrs. 15 min.

(3 hrs. 20 min.)

8 hrs. 40 min.

(4 hrs. 40 min.)

AC Adapter

USING AC POWER

Use the AC Adapter (connect as shown in the illustration).

NOTES:

●

The provided AC Adapter features automatic voltage selection in the AC range from 110 V to 240 V.

●

For other notes, 墌 pg. 71.

To AC outlet

To DC connector

Lithium-ion is vulnerable in colder temperatures.

About Batteries

DANGER! Do not attempt to take the batteries apart, or expose them to flame or excessive heat, as it may

cause a fire or explosion. WARNING! Do not allow the battery or its terminals to come in contact with metals, as this can result in a

short circuit and possibly start a fire.

The Benefits Of Lithium-Ion Batteries

Lithium-ion battery packs are small but have a large power capacity. However, when one is exposed to cold temperatures (below 10°C), its usage time becomes shorter and it may cease to function. If this happens, place the battery pack in your pocket or other warm, protected place for a short time, then re-attach it to the camcorder. As long as the battery pack itself is not cold, it should not affect performance.

(If you’re using a heating pad, make sure the battery pack does not come in direct contact with it.)

10 EN

PAUSE

Power Zoom Lever

GETTING ST ARTED

Grip Adjustment

Separate the Velcro strip.

(cont.)

Recording Start/ Stop button

Power Switch

Dioptre Adjustment Control

Pass your right hand through the loop and grasp

the grip.

Adjust your thumb and fingers through the grip,

to easily operate the Recording Start/Stop button and Power Switch and Power Zoom Lever. Be sure to fasten the Velcro strip to your preference.

Viewfinder Adjustment

Set the Power Switch to “ ” or “ ” while

pressing down the Lock Button located on the switch.

Turn the Dioptre Adjustment Control until the

indications in the viewfinder are clearly focused.

Shoulder Strap Attachment

Make sure the battery pack is removed.

Following the illustration, thread the strap through the eyelet 1, then fold it back and thread it through the buckle 2. Repeat the procedure to attach the other end of the strap to the other eyelet 3 located under the Grip Strap . Confirm the strap is not twisted.

Tripod Mounting

CAUTION:

When attaching the camera to a tripod, extend its legs to stabilise the camcorder. It is not advised to use small sized tripods. This may cause damage to the unit by falling over.

To attach the camera to a tripod, align the

direction stud and screw to the mounting socket and stud hole on the camera. Then tighten the screw clockwise. Some tripods are not equipped with studs.

MENU/BRIGHT Wheel

Power Lamp

EN11

Date/Time Settings

The date/time is recorded onto the tape at all times, but its display can be turned on or off during playback (墌 pg. 50, 51).

Set the Power Switch to “ ” while pressing down

the Lock Button located on the switch. The power lamp lights and the camcorder is turned on.

Press the MENU/BRIGHT wheel in to access the

Menu Screen.

/ W I P E

W. BAL

DSC

END

T I ME CODE

CLOCK

ADJ .

CLOCK

ADJ .

Power Switch

Display

FADER

AM AEPROGR AN E

C ACAMER LMANUA MSYSTE AYDISPL

RE NEON SC

IMETDATE /

NRETUR

Lock Button

–

LCD/ TV

UTOA

– – FFO

12 ..0125 17 30:

GR-DVL910A/ DVL510A/ DVL910EA/ DVL510EA only

DISPLAY Menu

Rotate the MENU/BRIGHT wheel to select

“ DISPLAY”. Press it and the DISPLAY Menu appears.

Rotate the MENU/BRIGHT wheel to select “CLOCK

ADJ.”. Press it and “day” is highlighted. Rotate the MENU/BRIGHT wheel to input the day. Press it. Repeat to input the month, year, hour and minute. Rotate the MENU/BRIGHT wheel to select

“1RETURN”, and press it twice. The Menu Screen

closes.

NOTE:

Even if you select “CLOCK ADJ.”, if the parameter is not highlighted the camcorder’s internal clock continues to operate. Once you move the highlight bar to the first date/ time parameter (day), the clock stops. When you finish setting the minute and press the MENU/BRIGHT wheel in, the date and time begin operation from the date and time you just set.

12 EN

PUSH HERE

Cassette holder cover

Erase protection tab*

Make sure the window side is facing out.

OPEN/EJECT Switch

Cassette holder

GETTING ST ARTED

(cont.)

Loading/Unloading A Cassette

The camcorder needs to be powered up to load or eject a cassette.

Slide and hold OPEN/EJECT in the direction of the

arrow then pull the cassette holder cover open until it locks. The cassette holder opens automatically.

•Do not touch internal components.

Insert or remove a tape and press “PUSH HERE” to

close the cassette holder.

•Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette holder cover.

•When the battery’s charge is low, you may not be able to close the cassette holder cover. Do not apply force. Replace the battery with a fully charged one before continuing.

Close the cassette holder cover firmly until it locks

into place.

To Protect Valuable Recordings . . .

.... slide the erase protection tab on the back of

the tape in the direction of “SAVE”. This prevents the tape from being recorded over. To record on this tape, slide the tab back to “REC” before loading it.

Be sure to press only the section labeled “PUSH HERE” to close the cassette holder; touching other parts may cause your finger to get caught in the cassette holder, resulting in injury or product damage.

NOTES:

●

It takes a few seconds for the cassette holder to open. Do not apply force.

●

If you wait a few seconds and the cassette holder does not open, close the cassette holder cover and try again. If the cassette holder still does not open, turn the camcorder off then on again.

●

If the tape does not load properly, open the cassette holder cover fully and remove the cassette. A few minutes later, insert it again.

●

When the camcorder is suddenly moved from a cold place to a warm environment, wait a short time before opening the cassette holder cover.

●

Closing the cassette holder cover before the cassette holder comes out may cause damage to the camcorder.

●

Even when the camcorder is switched off, a cassette can be loaded or unloaded. After the cassette holder is closed with the camcorder switched off, however, it may not recede. It is recommended to turn the power on before loading or unloading.

●

When resuming recording, once you open the cassette holder cover a blank portion will be recorded on the tape or a previously recorded scene will be erased (recorded over) regardless of whether the cassette holder came out or not. See page 20 for information about recording from the middle of a tape.

Approximate recording time

Tape

30 min. 30 min. 45 min.

60 min. 60 min. 90 min.

80 min. 80 min. 120 min.

Recording mode

SP LP

MENU/BRIGHT Wheel

Power Lamp

Lock Button

Power Switch

Display

REC MODE – SP

GR-DVL910A/DVL510A/ DVL910EA/DVL510EA only

Menu Screen

Sub Menu

EN13

Recording Mode Setting

Set the tape recording mode depending on your preference.

Set the Power Switch to “ ” while pressing down

the Lock Button located on the switch. The power lamp lights and the camcorder is turned on.

Press the MENU/BRIGHT wheel in. The Menu

Screen appears. Rotate the MENU/BRIGHT wheel to select

“ CAMERA” and press it. The CAMERA Menu appears.

Rotate the MENU/BRIGHT wheel to select “REC

MODE” and press it. The Sub Menu appears. Select “SP” or “LP” by rotating the MENU/BRIGHT wheel

and press it. Rotate the MENU/BRIGHT wheel to select “1RETURN”, and press it twice. The Menu Screen closes.

•Audio Dubbing (墌 pg. 66) and Insert Editing (墌 pg. 67) are impossible on a tape recorded in the LP mode.

•“LP” (Long Play) is more economical, providing

1.5 times the recording time.

NOTES:

●

If the recording mode is switched during recording, the playback picture will be blurred at the switching point.

●

It is recommended that tapes recorded in the LP mode on this camcorder be played back on this camcorder.

●

During playback of a tape recorded on another camcorder, blocks of noise may appear or there may be momentary pauses in the sound.

14 EN

Clipped edge

Memory card

GETTING ST ARTED

MENU/BRIGHT Wheel

(cont.)

Label

Card Cover

Loading A Memory Card

(GR-DVL910A/DVL510A/DVL910EA/DVL510EA only)

The provided memory card is already inserted in the camcorder when you receive the camcorder.

Make sure the camcorder’s power is off.

Open the card cover (MEMORY CARD).

Insert the memory card clipped edge first.

•Do not touch the terminal on the reverse side of the label.

To close the card cover, push it until you hear a

click.

To Unload A Memory Card . . .

.... in step 3 push the memory card, which then

comes out of the camcorder automatically. Pull it out and close the card cover.

NOTES:

●

Be sure to use only SD Memory Cards marked

“ ” or MultiMediaCards marked “ ”.

●

Some brands of memory cards are not compatible with this camcorder. Before purchasing a memory card , consult its manufacturer or dealer.

●

Before using a new memory card, it is necessary to FORMAT the card. 墌 pg. 36.

ATTENTION:

Do not insert/remove the memory card while the camcorder is turned on, as this may cause the memory card to be corrupted or cause the camcorder to become unable to recognize whether or not the card is installed.

Power Lamp

Display

– FINE

TYQUAL I

Lock Button

Power Switch

SIZE

UXGA

ST ANDARD–

GAV

–

AUTO

–

NRETUR

Picture Quality Mode Setting

(GR-DVL910A/DVL510A/DVL910EA/DVL510EA only)

The Picture Quality mode can be selected to best match your needs. Two Picture Quality modes are available: FINE and STANDARD (in order of quality).

Set the Power Switch to “ ” while pressing

down the Lock Button located on the switch. The power lamp lights and the camcorder turns on.

Press the MENU/BRIGHT wheel in. The Menu

Screen appears. Rotate the MENU/BRIGHT wheel to select “

DSC” and press it. The DSC Menu appears. Rotate the MENU/BRIGHT wheel to select

“QUALITY” and press it. The Sub Menu appears. Rotate the MENU/BRIGHT wheel to select the desired mode and press it.

Rotate the MENU/BRIGHT wheel to select

“ RETURN”, and press it twice. The Menu Screen closes.

Approximate Number of Storable Images

Memory Card

8 MB (provided) 16 MB (optional) 32 MB (optional) 64 MB (optional)

NOTE:

The number of storable images depends on the selected picture quality as well as the composition of the subjects in the images and the type of memory card being used.

Picture Quality Mode

FINE

100

200

400

800

STANDARD

200

400

800

1600

VIDEO RECORDING & PLA YBACK

VIDEO RECORDING

PLAYBACK

VIDEO RECORDING .......................16 – 20

Basic Recording...................................... 16

Journalistic Shooting ................................ 17

Self-Recording ....................................... 17

Operation Mode..................................... 17

Zooming ............................................. 18

Video Light .......................................... 19

Time Code............................................ 20

VIDEO PLAYBACK .........................21 – 24

Normal Playback .................................... 21

Still Playback ........................................ 21

Shuttle Search ....................................... 21

Frame-By-Frame Playback ......................... 21

Connections ...................................22 – 23

Blank Search......................................... 24

EN15

CONTENTS

16 EN

min

BR I GHT

Power lamp

Power Switch

Lock Button

Recording Start/Stop Button

Display

min

(Now calculating)

90 min

(Blinking) (Blinking) (Blinking)

Tape remaining time indicator (Approximate)

89 min

1 min0 min

During

shooting

3 min

2 min

VIDEO RECORDING

Basic Recording

NOTE:

You should already have performed the procedures listed below. If not, do so before continuing.

●

Power (墌 pg. 8)

●

Grip Adjustment (墌 pg. 10)

●

Viewfinder Adjustment (墌 pg. 10)

●

Load A Cassette (墌 pg. 12)

●

Recording Mode Setting (墌 pg. 13)

Press in the tabs on the lens cap to remove it.

GR-DVL910A/DVL510A/DVL910EA/DVL510EA only:

Press PUSH OPEN, open the LCD monitor and

set the VIDEO/DSC Switch to “VIDEO”.

Set the Power Switch to “ ” or “ ” while pressing

down the Lock Button located on the switch.

Shooting while using the LCD monitor:

the LCD monitor is fully open. Tilt it upward/ downward for best viewability.

Shooting while using the viewfinder:

monitor.

•The power lamp lights and the camcorder enters the Record-Standby mode. “PAUSE” is displayed.

Press the Recording Start/Stop Button. “ ”

appears while recording is in progress.

Make sure

Close the LCD

180°

PUSH OPEN Button

MENU/BRIGHT Wheel

90°

VIDEO/DSC Switch (GR-DVL910A/DVL510A/ DVL910EA/DVL510EA only)

Tally lamp (lights while recording is in progress)

To Stop Recording . . .

.... press the Recording Start/Stop Button. The camcorder

re-enters the Record-Standby mode.

To Adjust The Brightness Of The Display

.... rotate the MENU/BRIGHT wheel until the bright level

indicator on the display moves and the appropriate brightness is reached.

•If you are using the GR-DVL910A/DVL450A/DVL910EA, it is also possible to adjust the brightness of the viewfinder by closing the LCD monitor and adjusting as described above.

NOTES:

●

If the Record-Standby mode continues for 5 minutes, the camcorder’s power shuts off automatically. To turn the camcorder on again, set the Power Switch to “OFF”, then back to “ ” or “ ”.

●

The image will not appear simultaneously on the LCD monitor and the viewfinder. It will appear in the viewfinder when the LCD monitor is in the lock position, and it will appear on the LCD monitor when fully extended.

●

When a blank portion is left between recorded scenes on the tape, the time code is interrupted and errors may occur when editing the tape. To avoid this, refer to “Recording from the middle of a tape” (墌 pg. 20).

●

To turn the tally lamp or beep sounds off, 墌 pg. 46, 48.

For other notes, 墌 pg. 71

Self-Recording

EN17

JOURNALISTIC SHOOTING

In some situations, different shooting angles may provide more dramatic results. Hold the camcorder in the desired position and tilt the LCD monitor in the most convenient direction. It can rotate 270° (90° downward, 180° upward).

SELF-RECORDING

You can shoot yourself while viewing your own image in the LCD monitor. Open the LCD monitor and tilt it upward 180° so that it faces forward, then point the lens toward yourself and start recording.

To turn on the camcorder, set the Power Switch to any operation mode except “OFF”while pressing down the Lock Button located on the switch.

Power Switch

Power lamp

VIDEO/DSC Switch (GR-DVL910A/DVL510A/ DVL910EA/DVL510EA only; open the LCD monitor to access this switch.)

When the Power Switch is set to “ ”, “ ” appears. When set to “ indication.

(GR-DVL910A/DVL510A/ DVL910EA/DVL510EA only)

When the Power Switch is set to “ ” or “ ” and the VIDEO/DSC Switch is set to “ appears. When set to “VIDEO”, there is no indication.

” or “ ”, there is no

Lock Button

”, “ ”

Operation Mode

Choose the appropriate operation mode according to your preference using the Power Switch and VIDEO/DSC Switch (GR-DVL910A/DVL510A/DVL910EA/DVL510EA only).

Power Switch Position

(Manual):

Allows you to set various recording functions using the Menus. If you want more creative capabilities than Full Auto recording, try this mode.

(Full Auto):

Allows you to record using NO special effects or manual adjustments. Suitable for standard recording.

OFF:

Allows you to switch off the camcorder.

• Allows you to play back a recording on the tape.

• Allows you to transfer a still image recorded on the tape

to a computer (GR-DVL450A/DVL313A/DVL310A/ DVL210A/DVL210EA only).

• Allows you to display a still image stored in the memory

card or to transfer a still image stored in the memory card to a computer (GR-DVL910A/DVL510A/DVL910EA/ DVL510EA only).

VIDEO/DSC Switch Position (GR-DVL910A/

DVL510A/DVL910EA/DVL510EA only)

VIDEO:

Allows you to record on a tape or play back a tape. If “REC SELECT” is set to Screen, still images are also recorded in the memory card.

Allows you to record a still image or display a still image stored in the memory card.

“ / ”

in the DSC Menu

18 EN

1xW

10xW

20xW

40xW

VIDEO RECORDING

(cont.)

Zoom in (T: Telephoto)

Zoom display

10xW

Approximate zoom ratio

Power Zoom Lever

Zoom out (W: Wide angle)

Digital zoom zone

10X (optical) zoom zone

FEATURE:

Zooming

PURPOSE:

To produce the zoom in/out effect, or an instantaneous change in image magnification.

OPERATION:

Zoom In

Slide the Power Zoom Lever towards “T”.

Zoom Out

Slide the Power Zoom Lever towards “W”.

䡲 The further you slide the Power Zoom Lever, the

quicker the zoom action.

NOTES:

●

Focusing may become unstable during Zooming. In this case, set the zoom while in Record-Standby, lock the focus by using the manual focus (墌 pg. 43), then zoom in or out in Record mode.

●

Zooming is possible to a maximum of 600X (

GR-DVL313A

DVL310A/DVL210A/DVL910EA/DVL510EA/DVL210EA

or it can be switched to 10X magnification using the optical zoom (墌 pg. 47).

●

Zoom magnification of over 10X is done through Digital image processing, and is therefore called Digital Zoom.

●

During Digital zoom, the quality of image may suffer.

●

Digital zoom cannot be used when digital image processing, such as Picture Wipe/Dissolve (墌 pg. 40, 41) or Video Echo (墌 pg. 39), is activated.

●

Macro shooting (as close as approx. 5 cm to the subject) is possible when the Power Zoom Lever is set all the way to “W”. Also see “TELE MACRO” in the Menu Screen on page 48.

)/500X (

GR-DVL910A/DVL510A/DVL450A/

EN19

LIGHT OFF/AUTO/ON Switch (Open the LCD monitor to access this switch.)

DANGER

䡲 The video light can become

extremely hot. Do not touch it either while in operation or soon after turning it off, otherwise serious injury may result.

䡲 Do not place the camcorder into the

carrying case immediately after using the video light, since it remains extremely hot for some time.

䡲 When operating, keep a distance of

about 30 cm between the video light and people or objects.

䡲 Do not use near flammable or explosive

materials.

䡲 It is recommended that you consult your

nearest JVC dealer for replacing the video light.

FEATURE:

Video Light

PURPOSE:

To brighten the scene when natural lighting is too dim.

OPERATION:

Set LIGHT OFF/AUTO/ON as required: OFF : Turns off the light.

AUTO : Automatically turns on the light when the

ON : Always keeps the light on as long as the

䡲 The video light can only be used with the

䡲 It is recommended to set the white balance

䡲 When not using the video light, turn it off to save

NOTES:

●

camcorder senses insufficient lighting on the subject.

camcorder is turned on.

camcorder’s power on.

(墌 pg. 45) to when you use the video light.

battery power.

Even if the battery indicator

( )

does not blink due to low battery charge, the camcorder may turn off automatically when you turn on the video light, or when you start recording with the video light turned on. When LIGHT OFF/AUTO/ON is set to “AUTO”:

•

Depending on the lighting conditions, the video light may keep turning on and off. In this case, manually switch the light on or off using LIGHT OFF/AUTO/ON.

•

While the “SHUTTER” or “SPORTS” mode (墌 pg. 39) is engaged, the light is likely to stay on.

•

While the “TWILIGHT” mode (墌 pg. 39) is engaged, the light will not activate.

•

While the “Night-Scope” mode (墌 pg. 38) is engaged, the light will not activate.

20 EN

VIDEO RECORDING

Time Code

During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback. If recording starts from a blank portion, the time code begins counting from “00:00:00” (minute:second:frame). If recording starts from the end of a previously recorded scene, the time code continues from the last time code number.

To perform Random Assemble Editing (墌 pg. 61 – 65), time code is necessary. If during recording a blank portion is left partway through the tape, the time code is interrupted. When recording is resumed, the time code starts counting up again from “00:00:00”. This means the camcorder may record the same time codes as those existing in a previously recorded scene. To prevent this, perform “Recording From The Middle of A Tape” below in the following cases;

•When shooting again after playing back a recorded tape.

•When power shuts off during shooting.

•When a tape is removed and re-inserted during

shooting.

•When shooting using a partially recorded tape.

•When shooting on a blank portion located

partway through the tape.

•When shooting again after shooting a scene then opening/closing the cassette holder cover.

Recording From The Middle Of A Tape

1. Play back a tape or use Blank Search (墌 pg. 24) to find the spot at which you want to start recording,

then engage the Still Playback mode (墌 pg. 21).

2. Set the Power Switch to “ ” or “ ” while pressing down the Lock Button located on the switch, then

start recording.

NOTES:

●

The time code cannot be reset.

●

During fast-forwarding and rewinding, the time code indication does not move smoothly.

●

The time code is displayed only when “TIME CODE” is set to “ON” (墌 pg. 49, 50).

12:34:24

Display

Frames are not displayed during recording.

Minutes Seconds

Frames (25 frames = 1 second)

(cont.)

When a blank portion is recorded on a tape

Time code 00:00:00

Tape

Shooting start point

Time code 05:43:21

Proper recording

Time code 00:00:00

Tape

Shooting start point

Time code 05:43:21

Time code 00:00:00

Shooting start pointShooting stop point

Time code 05:44:00

Shooting start pointShooting start point

Newly recorded sceneBlankAlready recorded scene

Latest sceneNew sceneAlready recorded scene

VIDEO PLA YBACK

Lock Button

Power Switch

Power Zoom Lever (VOL.)

Play/Pause Button (

Rewind Button (

Stop Button (5)

/6)

)

Speaker

VIDEO/DSC Switch (GR-DVL910A/DVL510A/DVL910EA/ DVL510EA only; open the LCD monitor to access this switch)

Fast-Forward Button (

Normal Playback

Load a tape (墌 pg. 12).

Set the VIDEO/DSC Switch to “VIDEO”

(GR-DVL910A/DVL510A/DVL910EA/DVL510EA only), then set the Power Switch to “ ” while pressing down the Lock Button located on the switch. To start playback, press 4/6.

•To stop playback, press 5.

•Press 2 to rewind, or 3 to fast-forward the tape

during Stop mode.

To Control The Speaker Volume . . .

)

.... slide the Power Zoom Lever (VOL.) towards “+” to

turn up the volume, or towards “–” to turn down the volume.

NOTES:

●

If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn on again, set the Power Switch to “OFF”, then to “ ”.

●

The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV (墌 pg. 22).

●

You can also view the playback picture on the LCD monitor with it flipped over and pushed against the camera body.

●

LCD monitor/viewfinder indications:

•

When power is supplied from a battery: the “ ” battery pack remaining power indicator is displayed. When power is supplied from an AC outlet: “ ” does not appear.

•

During Stop mode, none of the indications are displayed.

●

When a cable is connected to the AV connector, the sound is not heard from the speaker.

EN21

Still Playback:

1) Press

2) To resume normal playback, press

●

/6 during playback.

If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged. After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off. When

Shuttle Search:

1) Press

2) To resume normal playback, press

●

for forward or 2 for reverse search during playback.

During playback, press and hold 2 or 3. The search continues as long as you hold the button. Once you release it, normal playback resumes. A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.

Pauses during playback.

/6 again.

is pressed, the image may not pause immediately while the camcorder stabilises the still image.

Allows high-speed search in either direction.

/6.

Frame-By-Frame Playback: Allows frame-by-frame search.

1) Engage Still Playback.

2) Rotate the MENU/BRIGHT wheel towards “+” for forward Frame-By-Frame Playback, or towards “–” for reverse

Frame-By-Frame Playback during Still Playback.

䡲 To resume normal playback, press 4/6.

●

You can also use the provided remote control for Frame-By-Frame Playback (墌 pg. 59).

Slow-Motion Playback, Playback Special Effects and Playback Zoom

Available only with the remote control (provided) (墌 pg. 59, 60).

22 EN

VIDEO PLA YBACK

Connections

A.Connection to a TV or VCR equipped with an S-VIDEO IN and A/V input

connectors

Connector cover*

To S-VIDEO

To AV

S-Video cable (optional)

To TV or VCR

To S-VIDEO IN

White to AUDIO L IN**

(cont.)

Audio/Video cable [mini-plug to RCA plug] (provided)

* When connecting the cables, open this cover. ** The Audio cable is not required for watching still images only.

Red to AUDIO R IN**

Yellow: Not connected

VCR

B.Connection to a TV or VCR equipped only with A/V input connectors

Connector cover*

To TV or VCR

To AV

White to AUDIO L IN**

Audio/Video cable (provided)

Red to AUDIO R IN**

Yellow to VIDEO IN

VCR

* When connecting the cables, open this cover. ** The Audio cable is not required for watching still images only.

Make sure all units are turned off.

Connect the camcorder to a TV or VCR as

shown in the illustration (墌 pg. 22).

If using a VCR . . . go to step 3. If not . . . go to step 4.

Connect the VCR output to the TV input,

referring to your VCR’s instruction manual.

Turn on the camcorder, the VCR and the TV.

Set the VCR to its AUX input mode, and set the

TV to its VIDEO mode.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

.... set “DATE/TIME” to “AUTO”, “ON” or “OFF”

in the Menu Screen (墌 pg. 50).

•Time Code

.... set “TIME CODE” to “ON” or “OFF” in the

Menu Screen (墌 pg. 50).

•Playback Sound Mode, Tape Speed And Tape

Running Displays for video playback Or Directory/File Names and Image Number/Total

Number of Images for D.S.C. Playback (GR-

DVL910A/DVL510A/DVL910EA/DVL510EA only)

.... set “ON SCREEN” to “LCD” or “LCD/TV” in

the Menu Screen (墌 pg. 50). Or, press DISPLAY on the remote control (provided).

EN23

NOTES:

●

It is recommended to use the AC Adapter as the power supply instead of the battery pack (墌 pg. 9).

●

To monitor the picture and sound from the camcorder without inserting a tape or memory card*, set the camcorder’s Power Switch to “ ” or “ ”, then set your TV to the appropriate input mode.

* GR-DVL910A/DVL510A/DVL910EA/DVL510EA only

●

Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

●

If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.

●

If no image is displayed or no sound is heard from the TV, set “S/AV INPUT” to “OFF” in the Menu Screen (GR-DVL910A/DVL510A/DVL910EA/ DVL510EA only, 墌 pg. 50).

24 EN

BLANK SEARCH Button

Power Switch

Display

Lock Button

VIDEO PLA YBACK

(cont.)

Blank Search

Helps you find where you should start recording in the middle of a tape to avoid time code interruption (墌 pg. 20).

Load a tape (墌 pg. 12).

Set the VIDEO/DSC Switch to “VIDEO”

(GR-DVL910A/DVL510A/DVL910EA/DVL510EA only), then set the Power Switch to “ ” while pressing down the Lock Button located on the switch.

Press BLANK SEARCH.

•“BLANK SEARCH” appears blinking and the camcorder automatically starts reverse or forward shuttle search, then stops at the spot which is about 3 seconds of tape before the beginning of the detected blank portion.

BL ANK SEARCH

Stop Button (5)

VIDEO/DSC Switch (GR-DVL910A/ DVL510A/DVL910EA/DVL510EA only; open the LCD monitor to access this switch)

To cancel Blank Search midway . . .

.... press 5.

NOTES:

●

In step 3, if the current position is at a blank portion the camcorder searches in the reverse direction, and if the current position is at a recorded portion the camcorder searches in the forward direction.

●

Blank Search does not work if “HEAD CLEANING REQUIRED. USE CLEANING CASSETTE” has appeared with the tape.

●

If the beginning or end of the tape is reached during Blank Search, the camcorder stops automatically.

●

A blank portion which is shorter than 5 seconds of tape may not be detected.

●

The detected blank portion may be located between recorded scenes. Before you start recording, make sure there is no recorded scene after the blank portion.

DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK

DIGITAL STILL CAMERA

(D.S.C.) RECORDING

PLAYBACK

The D.S.C. (Digital Still Camera) features are available on GR-DVL910A, GR-DVL510A, GR-DVL910EA and GR-DVL510EA.

CONTENTS

D.S.C. RECORDING ........................26 – 27

Basic Shooting (Snapshot)...................26 – 27

D.S.C. PLAYBACK..........................28 – 36

Normal Playback .................................... 28

Auto Playback ....................................... 28

EN25

INDEX Screen ........................................ 29

Index Playback ...................................... 29

Jump Playback ...................................... 30

Protecting Images................................... 31

Deleting Images ............................. 32 – 33

Setting Print Information

(DPOF Setting) .............................. 34 – 35

Initialising A Memory Card......................... 36

26 EN

FINE

10 / 100

VIDEO/DSC Switch (Open the LCD monitor to access this switch.)

SNAP MODE –

SNAPSHOT Button

Power Switch

Display

PIN– UP

FRAME FULL MUL T I –

MUL T I –

Lock Button

Menu Screen

D.S.C. RECORDING

Basic Shooting (Snapshot)

You can use your camcorder as a Digital Still Camera for taking snapshots.

NOTE:

You should already have performed the procedures listed below. If not, do so before continuing.

●

Power (墌 pg. 8)

●

Grip Adjustment (墌 pg. 10)

●

Viewfinder Adjustment (墌 pg. 10)

●

Loading A Memory Card (墌 pg. 14)

●

Picture Quality Mode Setting (墌 pg. 14)

SNAPSHOT MODE SELECTION

Set the VIDEO/DSC Switch to “ ”, then set the

Power Switch to “ ” while pressing down the Lock Button located on the switch.

Press the MENU/BRIGHT wheel in. The Menu

Screen appears. Rotate the MENU/BRIGHT wheel to select “

CAMERA”. Press it and the CAMERA Menu appears. Rotate the MENU/BRIGHT wheel to select “SNAP

MODE”, then press it. Rotate the MENU/BRIGHT wheel to select the

desired Snapshot mode, then press it. Rotate the MENU/BRIGHT wheel to select

“1RETURN” and press it twice. The Menu Screen

closes.

SNAPSHOT RECORDING

Picture Quality

Displays the quality of the stored image: FINE or STD (standard) (in order of quality) (

Total number of shots

Displays the approximate total number of shots that can be stored, including those already taken. The number increases or decreases depending on the shots stored, the Picture Quality mode, etc.

Card icon

Appears during shooting and blinks when a memory card is not loaded.

Shooting icon

Appears and blinks during shooting.

墌 pg. 14).

Number of shots taken

Displays the number of images that have already been shot.

Press SNAPSHOT. The image is recorded in the memory card.

•Regardless of the Power Switch position (“ ” or “ ”), Snapshot recording takes place using the

selected Snapshot mode.

PIN-UP Pin-Up mode*

FRAME Snapshot mode with frame*

FULL Snapshot mode with no frame*

MULTI-4 Multi-Analyser 4

EN27

To Delete Unwanted Still Images . . .

.... when unwanted still images are stored in the memory

card or its memory is full, refer to “Deleting Images” (墌 pg. 32) and delete unwanted still images.

To Remove The Shutter Sound . . .

.... when you do not want to hear the shutter sound, set

“BEEP” to “OFF” in the Menu Screen (墌 pg. 46, 48). The sound is no longer heard from the speaker.

NOTES:

●

Even if “MULTI-4” or “MULTI-9” is engaged, Snapshot recording will be performed in the FULL mode during Digital Zoom or Night-Scope (墌 pg. 38).

●

Even if “DIS” is set to “ON” (墌 pg. 47), the Stabiliser will be disabled.

●

If Snapshot recording is not possible, “PHOTO” blinks when SNAPSHOT is pressed.

●

If Programme AE with special effects (墌 pg. 38) is engaged, certain modes of Programme AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks.

●

If shooting is not performed for approx. 5 minutes when the Power Switch is set to “ ” or “ ” and power is supplied from the battery pack, the camcorder shuts off automatically to save power. To perform shooting again, set the Power Switch to “OFF”, then to “ ” or “ ”.

●

The Motor Drive mode (墌 pg. 42) is disabled when the VIDEO/DSC Switch is set to “ ”.

●

Still images taken are compliant to DCF (Design rules for Camera File systems). They do not have any compatibility with devices which are not compliant to DCF.

MULTI-9 Multi-Analyser 9

*There is the sound effect of a shutter closing.

28 EN

Fast-Forward (3) Button

Play (

/6) Button

Rewind (

Button Stop (5) Button

VIDEO/DSC Switch (Open the LCD monitor to access this switch.)

[For Normal Playback] To display the next image

)

Display

. 10.

Lock Button

Power Switch

[For Auto Playback]

0010

100

10 / 24

0011

100

0012

100

0013

100

D.S.C. PLA YBACK

Normal Playback

Images shot with the camcorder are automatically numbered, then stored in numerical order in the memory card. You can view the stored images, one at a time, much like flipping through a photo album.

Load a memory card (墌 pg. 14).

Set the VIDEO/DSC Switch to “ ”, then set the Power Switch to “ ” while pressing down the

Lock Button.

•A stored image is displayed.

Press 3 to display the next image. Press 2 to display the previous image.

Auto Playback

You can run through all the images stored in memory automatically.

Perform steps 1 and 2 above.

Press 4/6.

To end Auto Playback, press 5.

NOTES:

●

Even if you shoot a new image after playing back a lownumbered one, this will not overwrite an existing image, because new images are automatically stored after the last-recorded one.

●

Images shot in a file size other than VGA with devices that are compatible with DCF (Design rules for Camera File systems) will be displayed as reduced-size thumbnail images. These thumbnail images cannot be transferred to a PC.

●

Images shot with devices that are not compatible with DCF cannot be viewed with this camcorder; “Unsupported Data!” will be displayed.

. 10.

To display the previous image

Date

Displays the date when the image was shot (if “DATE/TIME” is set to “ON” in the Menu Screen

Image number

Displays the index number of the image

墌 pg. 29).

file (

墌 pg. 50 – 51).

Directory and File names

Displays the directory and file names. Shows that the selected shot is in a directory called “100” and its file name is “DVC00013”. Each time shooting takes place, a file name is made using a number which is larger by one than the largest number of the file names which are in use. If the file name reaches DVC09999, a new directory will be made and the file name will start again from DVC00001. In the playback screen, the directory and only the last four digits of the file name are displayed.

Total number of images

Displays the total number of stored images.

+ 64 hidden pages