JVC GR-DVL45, GR-DVL20, GR-DVL25, GR-DVL40 User Manual

Download

CONTENTS

SAFETY PRECAUTIONS

ENGLISH

2 – 4

DIGITAL VIDEO CAMERA

GR-DVL45 GR-DVL40 GR-DVL25 GR-DVL20

Please visit our CyberCam Homepage on the World Wide Web and answer our Consumer Survey (in English only):

http://www.jvc-victor.co.jp/english/index-e.html

PROVIDED ACCESSORIES

GETTING STARTED

Power ............................................ 6

Date/Time Settings ............................ 8

Loading/Unloading A Cassette ............... 9

Recording Mode Setting ..................... 10

Grip Adjustment .............................. 11

Viewfinder Adjustment ...................... 11

Shoulder Strap Attachment ................. 11

Tripod Mounting............................... 11

RECORDING

Basic Recording ............................... 12

Advanced Features ........................... 17

PLAYBACK

Basic Playback ................................ 29

Advanced Features ........................... 30

Basic Connections ............................. 32

Advanced Connections ....................... 34

TAPE DUBBING

Tape Dubbing .................................. 36

Digital Dubbing ................................ 37

USING THE REMOTE CONTROL UNIT

Random Assemble Editing ................... 42

For More Accurate Editing ................... 46

Audio Dubbing ................................. 48

TROUBLESHOOTING

6 – 11

12 – 28

29 – 35

36 – 37

38 – 48

49 – 53

INSTRUCTIONS

USER MAINTENANCE

CAUTIONS

INDEX

Controls, Connectors And Indicators ....... 58

Indications ..................................... 60

Ter ms ........................................... 62

SPECIFICATIONS

LYT0445-001A

55 – 57

58 – 62

2 EN

Dear Customer,

Thank you for purchasing this digital video camera. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product.

Using This Instruction Manual

•All major sections and subsections are listed in the Table Of Contents on the cover page.

•Notes appear after most subsections. Be sure to read these as well.

•Basic and advanced features/operation are separated for easier reference.

It is recommended that you . . .

.... refer to the Index (Z pgs. 58 – 62) and familiarize yourself with button locations, etc. before use.

.... read thoroughly the Safety Precautions. They contain extremely important information regarding the safe

use of this product.

You are recommended to carefully read the cautions on pages 55 through 57 before use.

SAFETY PRECAUTIONS

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS

UNIT TO RAIN OR MOISTURE.

Warning on lithium cell battery (for remote control unit)

The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, heat above 100°C or incinerate. Replace the battery with Maxell, Panasonic (Matsushita Electric), Sanyo or Sony CR2025; use of another battery may present a risk of fire or explosion.

n Dispose of used battery promptly. n Keep away from children. n Do not disassemble and do not dispose of in fire.

CAUTIONS:

n If you notice smoke or a peculiar smell coming from the camcorder or AC adapter/charger, shut it down

and unplug it immediately. Continue using the camcorder or AC adapter/charger under these conditions could lead to fire or electric shock. Contact your JVC dealer. Do not attempt to repair the malfunction yourself.

n To prevent shock, do not open the cabinet. No user serviceable parts inside. Refer servicing to qualified

personnel.

n When you are not using the AC Power Adapter/Charger for a long period of time, it is recommended that

you disconnect the power cord from AC outlet.

EN3

NOTES:

●

The rating plate (serial number plate) and safety caution are on the bottom and/or the back of the main unit.

●

The rating plate (serial number plate) of the AC Power Adapter/Charger is on its bottom.

This camcorder is designed to be used with PAL-type colour television signals. It cannot be used for playback with a television of a different standard. However, live recording and LCD monitor/viewfinder playback are possible anywhere. Use the BN-V207U/V214U battery packs and, to recharge them, the provided multi-voltage AC Power Adapter/Charger. (An appropriate conversion adapter may be necessary to accommodate different designs of AC outlets in different countries.)

4 EN

SAFETY PRECAUTIONS

Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as lead to the malfunctioning of internal circuitry. There is also a risk of fire or electric shock.

CAUTION!

The following notes concern possible physical damage to the camcorder and to the user.

When carrying, be sure to always securely attach and use the provided shoulder strap. Carrying or holding the camcorder by the viewfinder and/or the LCD monitor can result in dropping the unit, or in a malfunction.

Take care not to get your finger caught in the cassette cover. Do not let children operate the camcorder, as they are particularly susceptible to this type of injury.

Do not use a tripod on unsteady or unlevel surfaces. It could tip over, causing serious damage to the camcorder.

CAUTION!

Connecting cables (Audio/Video, S-Video, Editing, DC, etc.) to the camcorder and leaving the unit on top of the TV is not recommended, as tripping on the cables will cause the camcorder to fall, resulting in damage.

n This camcorder is designed exclusively for the digital video cassette. Only cassettes marked

can be used with this unit.

Before recording an important scene . . .

.... make sure you only use cassettes with the Mini DV mark .

.... remember that this camcorder is not compatible with other digital video formats.

.... remember that this camcorder is intended for private consumer use only. Any commercial use

without proper permission is prohibited. (Even if you record an event such as a show, performance or exhibition for personal enjoyment, it is strongly recommended that you obtain permission beforehand.)

INFORMATION FOR GR-DVL25/ DVL20 OWNERS WITH A PC

This camcorder can transfer still images to a PC using optional software (such as the HS-V4KIT).

PROVIDED ACCESSORIES

EN5

•AC Power Adapter/ Charger AA-V20A or AA-V20EA

•Battery Pack BN-V214U or BN-V207U

•Lithium Battery CR2025 (for remote control unit)

•Core Filter (for optional DV cable)

•Core Filter (for provided editing cable or optional JLIP cable*)

*GR-DVL45/DVL40 owners: Necessary for use

with the provided software. GR-DVL25/DVL20 owners: Necessary for use with optional software.

•Remote Control Unit RM-V711U

•Shoulder Strap

•CD-ROM (GR-DVL45/DVL40 only) The CD ROM contains the following 5 software programmes:

• JLIP Video Capture

• JLIP Video Producer

Presto!

• Mr. Photo

• PhotoAlbum

• ImageFolio

•PC Connection Cable (GR-DVL45/DVL40 only)

•Editing Cable (GR-DVL45/ DVL40 owners: 4-pole – 2-pole. GR-DVL25/DVL20 owners: 2-pole – 2-pole)

•Audio/Video (A/V) Cable [RCA plug to RCA plug]

•DC Cord

•S-Video Cable

How to Attach The Core Filter

Attach the provided Core Filter to the provided editing cable, optional DV cable or optional JLIP cable. The Core Filter reduces interference.

12 3

Stopper

Release the stoppers on both ends of the Core Filter.

3 cm

Editing cable and JLIP cable: Wind once.

DV cable: Wind twice.

Run the cable through the Core Filter, leaving approx. 3 cm of cable between the cable plug and the Core Filter. Wind the cable around the outside of the Core Filter as shown in the illustration.

•Wind the cable so that it is not slack.

NOTE:

Take care not to damage the cable.

Close the Core Filter until it clicks shut. Connect the end of the cable with the Core Filter to the camcorder.

6 EN

CHARGE indicator

POWER indicator

Battery pack BN-V207U or BN-V214U

Power

This camcorder’s 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment.

GETTING STARTED

CHARGING THE BATTERY PACK

Make sure you unplug the camcorder’s DC cord from

To AC outlet

AC Power Adapter/Charger AA-V20A or AA-V20EA

DC OUT connector

Battery pack

BN-V207U BN-V214U

NOTES:

●

Perform charging where the temperature is between 10° and 35°C. 20° to 25°C is the ideal temperature range for charging. If the environment is too cold, charging may be incomplete.

●

Charging times noted above are for a fully discharged battery pack.

●

Charging time varies according to the ambient temperature and the status of the battery pack.

●

To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.

●

If you connect the camcorder’s DC cord to the adapter during battery charging, power is supplied to the camcorder and charging stops.

●

Since the AC Power Adapter/Charger processes electricity internally, it becomes warm during use. Be sure to use it only in well-ventilated areas.

●

When charging the battery pack for the first time or after a long storage period, the CHARGE indicator may not light. In this case, remove the battery pack from the AC Power Adapter/Charger, then try charging again.

●

If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced. Please purchase a new one.

Charging time

approx. 1 hr. 30 min. approx. 3 hrs.

the AC Power Adapter/Charger. Plug the AC Adapter/ Charger’s power cord into an AC outlet. The POWER indicator lights.

Remove the battery pack’s protective cap. Attach the

battery pack with its long groove pointing toward the indicator side of the battery pack mount on the AC Power Adapter/Charger. The CHARGE Indicator begins blinking to indicate charging has started.

When the CHARGE indicator stops blinking but stays

lit, charging is finished.

Slide the battery in the opposite direction of the arrow

and lift off. Remember to unplug the AC Adapter/ Charger’s power cord from the AC outlet.

Lithium-ion is vulnerable in colder temperatures.

About Batteries

DANGER! Do not attempt to take the batteries apart, or

expose them to flame or excessive heat, as it may cause a fire or explosion.

WARNING! Do not allow the battery or its terminals to come in contact with metals, as this can result in a short circuit and possibly start a fire.

The Benefits Of Lithium-Ion Batteries

Lithium-ion battery packs are small but have a large power capacity. However, when one is exposed to cold temperatures (below 10° C), its usage time becomes shorter and it may cease to function. If this happens, place the battery pack in your pocket or other warm, protected place for a short time, then re-attach it to the camcorder. As long as the battery pack itself is not cold, it should not affect performance.

(If you’re using a heating pad, make sure the battery pack does not come in direct contact with it.)

BATTERY RELEASE Switch

Push in.

Hook on.

ATTENTION:

Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction.

To DC IN connector

EN7

USING THE BATTERY PACK

Hook the non-terminal end of the battery pack to the

camcorder and push the battery pack in until it locks in place .

•If the battery pack is attached in the wrong position, a malfunction may occur.

To Detach The Battery Pack . . .

.... slide BATTERY RELEASE and pull out the battery pack.

Approximate recording time

Battery pack

BN-V207U

BN-V214U

BN-V856U (optional)

( ) : when the video light is on (GR-DVL45/DVL40 only).

NOTES:

●

Recording time is reduced significantly under the following conditions:

•

Zoom or Record-Standby mode is engaged repeatedly.

•

The LCD monitor is used repeatedly.

●

Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.

INFORMATION:

VU-V856KIT is a set composed of the BN-V856U battery pack and AA-V80EG or AA-V80EA AC Power Adapter/ Charger. Read the VU-V856KIT’s instruction manuals before using. It is impossible to charge the BN-V856U battery pack using the provided AC Power Adapter/Charger. Use the optional AA-V80EG or AA-V80EA AC Power Adapter/ Charger.

LCD monitor on/

Viewfinder off

50 min.

(25 min.)

1 hr. 55 min.

(60 min.)

7 hrs.

(4 hrs.)

LCD monitor off/

Viewfinder on

60 min.

(30 min.)

2 hrs. 20 min.

(1 hr. 10 min.)

8 hrs. 30 min.

(4 hrs. 30 min.)

GETTING STARTED

AC Power Adapter/Charger AA-V20A or AA-V20EA

To DC OUT connector

Core filter

To AC outlet

DC cord

USING AC POWER

Use the AC Power Adapter/Charger (connect as shown in the illustration).

NOTES:

●

The provided AC Power Adapter/Charger features automatic voltage selection in the AC range from 110 V to 240 V.

●

For other notes, Z pg. 6.

8 EN

MENU/BRIGHT

Dial

GETTING STARTED

(cont.)

Date/Time Settings

The date/time is recorded onto the tape at all times, but its display can be turned on or off during playback (Z pg. 31).

Set the Power Switch to “ ”. The power lamp lights

and the camcorder is turned on.

Press MENU/BRIGHT. The Recording Menu appears.

Move the highlight bar to “TO MODE MENU” by

rotating MENU/BRIGHT. Press it and the Mode Menu appears.

Power lamp

Display

FOCUS EXPOSURE AUTO W. BALANCE FADER

/ WIPE

P. AE

/ EFFECT

TO MODE MENU

END

REC MODE WIDE MODE OFF ZOOM DIS GAIN UP

TO DATE / TIME MENU

TO SYSTEM MENU

END

INDICATION ON ON SCREEN OFF

DATE / TIME

AUTO AUTO

OFF OFF

SP 64X

ON AGC

– – – – –6– – – – –

DATE/TIME

ONDISPLAY

25 . 12 . 99

Power Switch

16 : 40

Recording Menu

Mode Menu

Date/Time Menu

Move the highlight bar to “TO DATE/TIME MENU”

by rotating MENU/BRIGHT. Press it and the Date/ Time Menu appears.

Move the highlight bar to “DATE/TIME” by rotating

MENU/BRIGHT. Press it and “day” is highlighted and

begins blinking. Rotating MENU/BRIGHT, input the day. Press it. Repeat to input the month, year, hour and minute. Press MENU/BRIGHT twice when the highlight bar is set to “RETURN” to exit.

NOTE:

Even if you select “DATE/TIME”, if the parameter is not highlighted the camcorder’s internal clock continues to operate. Once you move the highlight bar to the first date/ time parameter (day), the clock stops. When you finish setting the minute and press MENU/BRIGHT, the date and time begin operation from the date and time you just set.

RETURN

Cassette holder

PUSH OPEN Button

Cassette cover

OPEN/EJECT Switch

PUSH HERE

Erase protection switch*

Make sure the window side is facing out.

Loading/Unloading A Cassette

The camcorder needs to be powered up to load or eject a cassette.

Press PUSH OPEN and open the LCD monitor.

Slide OPEN/EJECT in the direction of the arrow then

swing the cover open until it locks. The holder opens automatically.

•Do not touch internal components.

Insert or remove a tape and press “PUSH HERE” to

close the cassette holder.

•Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette cover.

•When the battery’s charge is low, you may not be able to close the cover. Do not apply force. Replace the battery with a fully charged one before continuing.

Close the cassette cover firmly until it locks into

place. Close the LCD monitor.

EN9

GETTING STARTED

To Protect Valuable Recordings . . .

.... slide the erase protection switch on the

back of the tape in the direction of “SAVE”. This prevents the tape from being recorded over. To record on this tape, slide the switch back to “REC” before loading it.

NOTES:

●

It takes a few seconds for the cassette holder to open. Do not apply force.

●

If you wait a few seconds and the cassette holder does not open, close the cassette cover and try again. If the cassette holder still does not open, turn the camcorder off then on again.

●

If the tape does not load properly, open the cassette cover fully and remove the cassette. A few minutes later, insert it again.

●

When the camcorder is suddenly moved from a cold place to a warm environment, wait a short time before opening the cover.

●

Closing the cassette cover before the cassette holder comes out may cause damage to the camcorder.

●

Even when the camcorder is switched off, a cassette can be loaded or unloaded. After the cassette holder is closed with the camcorder switched off, however, it may not recede. It is recommended to turn the power on before loading or unloading.

●

When resuming recording after opening the cassette cover, a blank portion will be recorded on the tape or a previously recorded scene will be erased (recorded over) regardless of whether the cassette holder came out or not. See page 16 for information about recording from the middle of a tape.

Approximate recording time

Tape

DVM-30 30 min. 45 min. DVM-60 60 min. 90 min.

Recording mode

SP LP

10 EN

FOCUS EXPOSURE AUTO W. BALANCE FADER

/ WIPE

P. AE

/ EFFECT

TO MODE MENU

END

Power lamp

Display

AUTO AUTO

OFF OFF

Power Switch

MENU/BRIGHT

Dial

Recording Menu

GETTING STARTED

(cont.)

Recording Mode Setting

Set depending on your preference.

Set the Power Switch to “ ”. The power lamp lights

and the camcorder is turned on.

Press MENU/BRIGHT. The Recording Menu appears.

Move the highlight bar to “TO MODE MENU” by

rotating MENU/BRIGHT. Press it and the Mode Menu appears.

First move the highlight bar to “REC MODE” by

rotating MENU/BRIGHT. Press it and the parameter “SP” or “LP” is highlighted. Select “SP” or “LP” by rotating MENU/BRIGHT. Press it twice to exit from the Recording Menu.

•Audio Dubbing is impossible on a tape recorded in the LP mode.

•“LP” (Long Play) is more economical, providing

1.5 times the recording time.

NOTES:

●

If the recording mode is switched during recording, the playback picture will be blurred at the switching point.

●

It is recommended that tapes recorded in the LP mode on this camcorder be played back on this camcorder.

●

During playback of a tape recorded on another camcorder, blocks of noise may appear or there may be momentary pauses in the sound.

REC MODE

WIDE MODE OFF ZOOM DIS GAIN UP TO DATE / TIME MENU TO SYSTEM MENU

END

REC MODE WIDE MODE OFF ZOOM DIS GAIN UP TO DATE / TIME MENU TO SYSTEM MENU

END

SP 64X

ON AGC

– – – – –6– – – – –

64X ON AGC

– – – – –6– – – – –

Mode Menu

SP LP

Recording mode indicator

Recording Start/Stop Button

Dioptre Adjustment Control

Power Zoom Lever

Power Switch

Grip Adjustment

Separate the Velcro strip.

Pass your right hand through the loop and grasp the

grip.

Adjust so that your thumb and fingers can easily

operate the Recording Start/Stop Button and the Power Zoom Lever. Refasten the Velcro strip.

Viewfinder Adjustment

Set the Power Switch to “ ” or “ ”.

The power lamp comes on and the camcorder is turned on.

Slide the Dioptre Adjustment Control until the

indications in the viewfinder are clearly focused.

Shoulder Strap Attachment

EN11

GETTING STARTED

Following the illustration, thread the strap through the

eyelet 1, then fold it back and thread it through the buckle 2. Repeat the procedure to attach the other end of the strap to the other eyelet 3, making sure the strap is not twisted.

Adjust as shown in the illustration 4.

Tripod Mounting

Align the screw and camera direction stud on the

tripod with the camera’s mounting socket and stud hole. Then tighten the screw.

CAUTION:

When using a tripod, be sure to open and extend its legs fully to stabilise the camcorder. To prevent damage to the unit caused by falling over, do not use a small-sized tripod.

12 EN

Recording Start/Stop Button

Display

min

(Now calculating)

Power Switch

25 min

During shooting

Tape remaining time indicator (Approximate)

90 min

(Blinking) (Blinking) (Blinking)

89 min

1 min0 min

3 min

2 min

RECORDING

Basic Recording

Shooting While Watching The Viewfinder

NOTE:

You should already have performed the procedures listed below. If not, do so before continuing.

●

Power (Z pg. 6)

●

Load A Cassette (Z pg. 9)

●

Recording Mode Setting (Z pg. 10)

●

Grip Adjustment (Z pg. 11)

●

Viewfinder Adjustment (Z pg. 11)

Make sure the LCD monitor is closed and locked.

Press in the tabs on the lens cap to remove it, then set the Power Switch to “ ” or “ ”. The power lamp lights and the camcorder enters the Record-Standby mode. “PAUSE” is displayed in the viewfinder.

Press the Recording Start/Stop Button. “ ” appears

in the viewfinder while recording is in progress.

Press the Recording Start/Stop Button again to stop

recording. The camcorder re-enters the RecordStandby mode.

90°

180°

Recording Start/Stop Button

– – – – –

BRIGHT

To Adjust The Brightness Of The Display

.... rotate MENU/BRIGHT until the brightness

indicator on the display moves and the appropriate brightness is reached.

•If you are using the GR-DVL45/DVL40, it is also possible to adjust the brightness of the viewfinder.

6– – – – –

MENU/

BRIGHT Dial

Power Switch

Shooting While Watching The LCD Monitor

Before the following steps, perform the procedures listed in the above note.

Make sure the LCD monitor is fully open. Press in the

tabs on the lens cap to remove it, then set the Power Switch to “ ” or “ ”. The power lamp lights and the camcorder enters the Record-Standby mode. “PAUSE” is displayed in the LCD monitor.

Tilt the LCD monitor upward/downward for best

viewability and press the Recording Start/Stop Button. “ ” appears in the LCD monitor while recording is in progress.

Press the Recording Start/Stop Button again to stop

recording. The camcorder re-enters the RecordStandby mode.

NOTE:

When you use the LCD monitor outdoors in direct sunlight, the LCD monitor may be difficult to see. If this happens, use the viewfinder instead.

Power Switch Position

(Full Auto mode):

(Manual mode):

OFF:

PLAY:

Suitable for standard recording using NO special effects or manual adjustments. When set

to this mode, “F.AUTO” appears.

Allows you to set recording functions using the menus for more creative capabilities.

When set to this mode, “MANUAL” appears.

Switches off the camcorder. Setting to this position resets Manual Focus and Exposure Control to “AUTO”.

Allows you to play back your

recordings.

EN13

NOTES:

●

The image will not appear simultaneously in the LCD monitor and the viewfinder.

●

The cassette holder cannot be opened unless a power supply is attached.

●

There may be a delay after you open the cassette cover until the holder opens. Do not use force.

●

Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette cover.

●

The time required to calculate and display the remaining tape length, and the accuracy of the calculation, may vary according to the type of tape used.

●

“TAPE END” appears when the tape reaches its end, and the power goes off automatically if left in this condition for 5 minutes. “TAPE END” also appears when a cassette at its end is loaded.

●

If the Record-Standby mode continues for 5 minutes, the camcorder’s power shuts off automatically. To turn the camcorder on again, set the Power Switch to “OFF”, then back to “ ” or “ ”.

●

When a blank portion is left between recorded scenes on the tape, the time code is interrupted and errors may occur when editing the tape. To avoid this, refer to “Recording from the middle of a tape” (Z pg. 16).

●

Flicker may occur in the viewfinder.

●

During recording, sound is not heard from the speaker.

RECORDING

Self-Recording

JOURNALISTIC SHOOTING

In some situations, different shooting angles may provide more dramatic results. Hold the camcorder in the desired position and tilt the LCD monitor in the most convenient direction. It can rotate 270° (90° downward, 180° upward).

SELF-RECORDING

You can shoot yourself while viewing your own image in the LCD monitor. Open the LCD monitor and tilt it upward 180° so that it faces forward, then point the lens toward yourself and start recording.

14 EN

RECORDING

Basic Recording (cont.)

Zoom in (T: Telephoto)

Digital zoom zone

16X (optical) zoom zone

D T

10X

Power Zoom Lever

D T

16X

Zoom out (W: Wide angle)

D T

16X

Approximate zoom ratio

D T

64X

Zoom display

FEATURE:

Zooming

PURPOSE:

To produce a zoom in/out effect, or an instantaneous change in image magnification.

OPERATION:

Zoom In

Slide the Power Zoom Lever towards “T”.

Zoom Out

Slide the Power Zoom Lever towards “W”.

n The harder you slide the Power Zoom Lever, the

quicker the zoom action.

NOTES:

●

Focusing may become unstable during Zooming. In this case, set the zoom while in Record-Standby, lock the focus by using the manual focus (Z pg. 25), then zoom in or out in Record mode.

●

In Full Auto mode (when the Power Switch is set to “ ”), zoom magnification of up to 64X is possible. In Manual mode (when the Power Switch is set to “ ”), zooming is possible to a maximum of 450X, or 16X magnification offered by optical zoom.

●

Zoom magnification of over 16X is done through digital image processing, and is therefore called Digital Zoom.

●

During Digital Zoom, the quality of the image may suffer.

●

Digital Zoom cannot be used while functions done through digital image processing (Picture Wipe/ Dissolve function, Z pg. 22, Video Echo,

pg. 24, etc.) are activated.

●

Macro shooting (as close as approx. 5 cm to the subject) is possible when the Power Zoom Lever is set all the way to “W”. See also “TELE MACRO” in the System Menu on page 20.

Power Switch

EN15

LIGHT OFF/AUTO/ON Switch

DANGER

n The video light can become

extremely hot. Do not touch it either while in operation or soon after turning it off, otherwise serious injury may result.

n Do not place the camcorder into the

carrying case immediately after using the video light, since it remains extremely hot for some time.

n When operating, keep a distance of

about 30 cm between the video light and people or objects.

n Do not use near flammable or explosive

materials.

n It is recommended that you consult your

nearest JVC dealer for replacing the video light.

FEATURE:

Video Light (GR-DVL45/ DVL40 only)

PURPOSE:

To brighten the scene when natural lighting is too dim.

OPERATION:

Set LIGHT OFF/AUTO/ON as required: OFF : Turns off the light.

AUTO : Automatically turns on the light when the

ON : Always keeps the light on as long as the

n The video light can only be used with the

n It is recommended to set the white balance

n When not using the video light, turn it off to save

NOTES:

●

camcorder senses insufficient lighting on the subject.

camcorder is turned on.

camcorder’s power on.

(Z pg. 28) to when you use the video light.

battery power.

Even if the battery indicator ( ) does not blink due to low battery charge, the camcorder may turn off automatically when you turn on the video light, or when you start recording with the video light turned on. When LIGHT OFF/AUTO/ON is set to “AUTO”:

•

Depending on the lighting conditions, the video light may keep turning on and off. In this case, manually switch the light on or off using LIGHT OFF/AUTO/ON.

•

While the “SHUTTER” mode (Z pg. 24) is engaged, the light is likely to stay on.

•

While the “TWILIGHT” mode (Z pg. 24) is engaged, the light will not activate.

RECORDING

16 EN

RECORDING

Basic Recording (cont.)

NOTE: Recording From The Middle Of A Tape

Time Code

During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback. If recording starts from a blank portion, the time code begins counting from “00:00:00” (minute:second:frame). If recording starts from the end of a previously recorded scene, the time code continues from the last time code number.

To perform Random Assemble Editing (Z pg. 42 – 47), time code is necessary. If during recording a blank portion is left partway through the tape, the time code is interrupted. When recording is resumed, the time code starts counting up again from “00:00:00”. This means the camcorder may record the same time codes as those existing in a previously recorded scene. To prevent this, perform “Recording From The Middle of A Tape” below in the following cases;

•When shooting again after playing back a recorded tape.

•When power shuts off during shooting.

•When a tape is removed and re-inserted during shooting.

•When shooting using a partially recorded tape.

•When shooting on a blank portion located partway through the tape.

•When shooting again after shooting a scene then opening/closing the cassette cover.

Recording From The Middle Of A Tape

1. Play back a tape to find the spot at which you want to start recording, then engage the Still Playback

mode (Z pg. 29).

2. Set the Power Switch to “ ” or “ ”, then start recording.

NOTES:

●

The time code cannot be reset.

●

During fast-forwarding and rewinding, the time code indication does not move smoothly.

Display

12 : 34 : 24

Time code is displayed during playback.

Minutes

Seconds

Frames (25 frames = 1 second)

When a blank portion is recorded on a tape

Time code 00:00:00

Tape

Shooting start point

Time code 05:43:21

Proper recording

Time code 00:00:00

Tape

Shooting start point

Time code 05:43:21

Time code 00:00:00

Shooting start pointShooting stop point

Time code 05:44:00

Shooting start pointShooting start point

Newly recorded sceneBlankAlready recorded scene

Latest sceneNew sceneAlready recorded scene

RECORDING

Power Switch

Advanced Features

SNAPSHOT Button

MODE Button

EN17

Snapshot

Use your camcorder like a regular camera to take a snapshot, or several of them in succession.

SNAPSHOT MODE SELECTION

Set the Power Switch to “ ” or “ ”.

Choose the appropriate Snapshot mode from the 5

available by repeatedly pressing MODE until the desired snapshot mode indicator appears.

Display

FULL

PHOTO

PIN-UP Pin-Up mode*

FRAME Snapshot mode with frame*

FULL Snapshot mode with no frame*

Snapshot mode

During snapshot

MULTI-4 Multi-Analyser 4

MULTI-9 Multi-Analyser 9

* :There is a momentary

camera shutter-type blackout together with the sound effect of a shutter closing, which is recorded together with the image.

SNAPSHOT RECORDING

Press SNAPSHOT.

If you press during Record-Standby . . .

.... “PHOTO” appears and a still image will be

recorded for approx. 6 seconds, then the camcorder re-enters the Record-Standby mode.

If you press during Recording . . .

.... “PHOTO” appears and a still image will be

recorded for approx. 5 seconds, then normal recording resumes.

Motor Drive Mode

Keeping SNAPSHOT pressed provides an effect similar to serial photography. (Interval between still images: approx. 1 second)

NOTES:

●

Even if “MULTI-4” or “MULTI-9” is engaged, Snapshot recording will be performed in the FULL mode during Digital Zoom.

●

If Snapshot recording is not possible, “PHOTO” blinks when SNAPSHOT is pressed.

●

Even if Programme AE with special effects (Z pg. 24) is engaged, certain modes of Programme AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks.

●

During playback as well, all Snapshot modes are available. The shutter sound is not heard.

●

During Snapshot recording, the image displayed in the viewfinder may be partially missing. However, there is no defect in the recorded image.

RECORDING

18 EN

Display

/ WIPE / EFFECT

MANUAL

AUTO OFF

OFF

SP 64X

ON AGC

– – – – –6– – – – –

FOCUS EXPOSURE AUTO W. BALANCE FADER

P. AE TO MODE MENU END

REC MODE

WIDE MODE OFF ZOOM DIS GAIN UP TO DATE / TIME MENU TO SYSTEM MENU

END

MENU/BRIGHT Dial

Power Switch

Recording Menu

Mode Menu

DATE/TIME

INDICATION ON

ON SCREEN OFF

DATE / TIME

RETURN

ONDISPLAY

25 . 12 . 99

Date/Time Menu

SYSTEM MENU

TELE MACRO

WIND CUT SOUND MODE ID NUMBER DEMO. MODE

RETURN

OFF OFF 32kHz 06 OFF

System Menu

16 : 40

RECORDING

Advanced Features (cont.)

Using Menus For Detailed Adjustment

This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings.

Set the Power Switch to “ ”.

Press MENU/BRIGHT. The Recording Menu appears.

Rotate MENU/BRIGHT to move the highlight bar to

the desired function.

•If the setting you want cannot be found in the Menu Screen, place the highlight bar on “END”, then go to step 7.

Press MENU/BRIGHT. The setting procedure depends

on the function you select.

If you select “FOCUS”, “EXPOSURE”, “W.BALANCE”, “FADER/WIPE” or “P.AE/EFFECT” . . .

.... see respective pages (FOCUS: Z pg. 25,

EXPOSURE: Z pg. 26, W.BALANCE: Z pg. 28, FADER/WIPE: Z pg. 22, P.AE/EFFECT: Z pg. 24) and do each procedure from step 4.

If you select “TO MODE MENU” . . .

.... the Mode Menu appears. Go to step 5.

Rotate MENU/BRIGHT to move the highlight bar to

the desired function and press it.

If you select a function other than “TO DATE/TIME MENU” or “TO SYSTEM MENU” . . .

.... its parameter starts blinking. Rotate MENU/

BRIGHT until the desired parameter appears. Go to step 7.

If you select “TO DATE/TIME MENU” . . .

.... the Date/Time Menu appears. Go to step 6.

If you select “TO SYSTEM MENU” . . .

.... the System Menu appears. Go to step 6.

FOCUS EXPOSURE AUTO W. BALANCE FADER

/ WIPE

P. AE

/ EFFECT

TO MODE MENU

END

MANUAL AUTO

OFF OFF

Normal Screen

REC MODE WIDE MODE OFF ZOOM DIS GAIN UP TO DATE / TIME MENU TO SYSTEM MENU

END

SP 64X

ON AGC

– – – – –6– – – – –

DEC 25 ’ 98

: 30

Rotate MENU/BRIGHT to move the highlight bar to

the desired function, then press it.

If you select “DATE/TIME” . . . Z pg. 8 If you select other functions . . .

.... rotate MENU/BRIGHT until the desired param-

eter appears, then press it. The highlight bar automatically moves to “RETURN”. Go to step 7.

Press MENU/BRIGHT as many times as necessary to

return to the normal screen.

Recording Menu Explanations

FOCUS EXPOSURE W.BALANCE FADER/WIPE P.AE/EFFECT TO MODE MENU

Refer to “Focusing” (Z pg. 25). Refer to “Exposure Control” and “Iris Lock” (Z pg. 26, 27). Refer to “White Balance Adjustment” and “Manual White Balance Operation” (Z pg. 28). Refer to “Fade/Wipe Effects” (Z pg. 22, 23). Refer to “Programme AE With Special Effects” (Z pg. 24). Refer to “Mode Menu Explanations” below.

Mode Menu Explanations

REC MODE WIDE MODE

ZOOM

DIS

GAIN UP

TO DATE/TIME MENU TO SYSTEM MENU

: Factory preset

Allows you to set the recording mode (SP or LP) depending on your preference (Z pg. 10).

OFF SQUEEZE

CINEMA

16X

64X

450X

OFF

AGC

AUTO

OFF

Refer to “Date/Time Menu Explanations” (Z pg. 20). Refer to “System Menu Explanations” (Z pg. 20).

EN19

Select “OFF” when you want to use neither “SQUEEZE” nor “CINEMA”. For playback on TVs with an aspect ratio of 16:9. Naturally expands the

image to fit the screen without distortion. appears. When using this mode, refer to your wide-screen TV’s instruction manual. During playback/ recording on 4:3 TVs/LCD monitor/viewfinder, the image is elongated vertically.

Inserts black bands at the top and bottom of the screen. During playback on wide-screen TVs, the black bands at the top and bottom of the screen are cut and the screen ratio becomes 16:9. When using this mode, refer to your wide-screen TV’s instruction manual. During playback/recording on 4:3 TVs/ LCD monitor/viewfinder, black bands are inserted at the top and bottom of the screen and the image appears like a letterboxed 16:9 movie.

When set to “16X” while using Digital Zoom, the zoom magnification will reset to 16X since Digital Zoom will be disengaged.

Allows you to use the Digital Zoom. By digitally processing and magnifying images, zooming is possible from 16X (the optical zoom limit), to a maximum of 64X digital magnification.

Allows you to use the Digital Zoom. By digitally processing and magnifying images, zooming is possible from 16X (the optical zoom limit), to a maximum of 450X digital magnification.

To compensate for unstable images caused by camera-shake, particularly at high magnification.

NOTES:

●

Accurate stabilisation may not be possible if hand shake is excessive, or under the following conditions:

•

When shooting subjects with vertical or horizontal stripes.

•

When shooting dark or dim subjects.

•

When shooting subjects with excessive backlighting.

•

When shooting scenes with movement in various directions.

•

When shooting scenes with low-contrast backgrounds.

●

Switch off the Digital Image Stabiliser (DIS) when recording with the camcorder on a tripod.

●

The “ ” indicator appears blinking if the Stabiliser cannot be used.

This is automatically activated during Full Auto mode. The overall appearance may be grainy, but the image is bright.

The shutter speed is automatically adjusted (1/25 — 1/200 sec.). Shooting a subject in low or poor lighting at 1/25 sec. shutter speed provides a brighter image than in the AGC mode, but the subject’s movements are not smooth or natural. When set to this mode, “ ” is displayed.

Allows you to shoot dark scenes with no picture brightness adjustment.

CONTINUED ON NEXT PAGE

RECORDING

20 EN

Date/Time Menu Explanations

RECORDING

Advanced Features (cont.)

INDICATION

ON SCREEN

DISPLAY

DATE/TIME

* You can also change “ON SCREEN” to “ON” or “OFF” by pressing the DISPLAY button on the RM-V711U

remote control.

ON Makes all the indications appear in the camcorder (Z pg. 21). OFF Keeps all the indications (except the tape running indicator, warnings,

OFF Keeps the camcorder’s display from appearing on the connected TV

ON Makes the camcorder’s display appear on screen when the camcorder is

ON Makes the date/time settings appear in the camcorder (Z pg. 21). OFF Keeps the date/time settings from appearing in the camcorder.

Allows you to set the current date and time (Z pg. 8).

etc.) from appearing in the camcorder (Z pg. 21).

screen.

connected to a TV.

System Menu Explanations

TELE MACRO

WIND CUT

SOUND MODE

ID NUMBER

DEMO. MODE

OFF

OFF ON

32 kHz

48 kHz

This number is necessary when connecting the camcorder to a device such as a computer using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 06.

OFF ON

Usually the distance to a subject where the lens is in focus depends on the zoom magnification. Unless there is a distance more than 1m to the subject, the lens is out of focus at the maximum telephoto setting. When set to “ON”, you can shoot a subject as large as possible at a distance of approx. 60 cm.

•Depending on the zoom position, the lens may go out of focus. Disengages the function which cuts down on noise created by wind. Helps cut down on noise created by wind.

•“ ” appears.

•The quality of the sound will change. This is normal. Enables recording of stereo sound on four separate channels, and is

recommended for use when performing audio dubbing. Enables recording of stereo sound on two separate channels.

Automatic demonstration will not take place. Demonstrates certain functions such as Programme AE with special

effects, etc., and can be used to confirm how these functions operate. When “DEMO. MODE” is set to “ON” and the Recording Menu is closed, demonstration starts.

NOTES:

●

If a tape is in the camcorder, the demonstration cannot be turned on.

●

By turning off the camcorder, “DEMO. MODE” is set to “OFF” automatically.

: Factory preset

MENU/BRIGHT Dial

Power Switch

NOTES:

●

The Date/Time is always displayed when the Power Switch is set to “ ”.

●

Connect the camcorder to a TV and set “ON SCREEN” to “ON” in the Date/Time Menu. The display appears on the connected TV .

●

Even if “ON SCREEN” is set to “ON”, the indications are removed from the TV if “INDICATION” is set to “OFF”.

EN21

Date/Time Display During Recording

You should already have set the date and time (“Date/Time Settings”, Z pg. 8).

Set the Power Switch to “ ”.

Press MENU/BRIGHT. The Recording Menu appears.

Move the highlight bar to “TO MODE MENU” by

rotating MENU/BRIGHT. Press it and the Mode Menu appears.

Move the highlight bar to “TO DATE/TIME MENU”

by rotating MENU/BRIGHT. Press it and the Date/ Time Menu appears.

Move the highlight bar to “DISPLAY” by rotating

MENU/BRIGHT, then press it.

Move the highlight bar to “ON” or “OFF” by rotating

MENU/BRIGHT. Press it and the highlight bar

automatically moves to “RETURN”.

Press MENU/BRIGHT twice. Selection is complete

and the menu disappears.

RECORDING

NOTES:

●

It is impossible to make the tape running indicator “ from the LCD monitor or the viewfinder. For indications that can be removed, Z pg. 60.

●

If “INDICATION” is set in the Date/Time Menu, “INDICATION” in the Playback Menu will also be set to the same setting (Z pg. 31).

444

”, warnings, etc. disappear

LCD Monitor/Viewfinder Indications

You can make the LCD monitor/Viewfinder indications appear/disappear.

Before the following steps, perform steps 1 through 4 above.

Move the highlight bar to “INDICATION” by rotating

MENU/BRIGHT, then press it.

Rotate MENU/BRIGHT to display the desired setting.

OFF : To make the indications disappear. ON : To make the indications appear.

Then press it and the highlight bar automatically moves to “RETURN”.

Press MENU/BRIGHT twice. Selection is complete

and the menu disappears.

22 EN

Fade/Wipe Effects

These effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next. You can also vary transitions from scene to scene.

IMPORTANT:

Some Fade/Wipe Effects cannot be used with certain modes of Programme AE with special effects (Z pg. 24). If an unusable Fade/Wipe Effect is selected, its indicator blinks.

MENU/BRIGHT Dial

Power Switch

Recording Start/Stop Button

RECORDING

Advanced Features (cont.)

FADE/WIPE SELECTION ( , , , ,

, , , , , and )

Fade or Wipe works when recording is started or when you stop recording.

Set the Power Switch to “ ”.

Press MENU/BRIGHT. The Recording Menu appears.

Rotate MENU/BRIGHT to move the highlight bar to

“FADER/WIPE”, then press it.

Rotate MENU/BRIGHT to move the highlight bar to

the desired function, then press it.

•The FADER/WIPE Menu disappears and the effect is reserved. The indicator representing the selected effect appears.

Press the Recording Start/Stop Button to activate the

Fade-in/out or Wipe-in/out.

PICTURE WIPE OR DISSOLVE SELECTION ( , , , , , and )

The Picture Wipe or Dissolve works when recording is started.

Follow steps 1 through 4 above.

NOTES:

●

You can extend the length of a Fade or Wipe by pressing and holding the Recording Start/ Stop Button.

●

If the power is turned off after a scene is finished recording, the stored point is erased, disabling the Picture Wipe/Dissolve combination. When this happens, the Picture Wipe/ Dissolve indicator blinks. Also note that power shuts off automatically if 5 minutes elapse in the Record-Standby mode.

●

The sound at the end of the last recorded scene is not stored.

Engage the Record-Standby mode.

If you select Picture Wipe/Dissolve during recording . . .

.... press the Recording Start/Stop Button when one

scene is finished. The point at which the scene ended is stored in memory.

If you select Picture Wipe/Dissolve during RecordStandby mode . . .

.... press the Recording Start/Stop Button to start

recording and press it again when one scene is finished. The point at which the scene ended is stored in memory.

If you select Picture Wipe/Dissolve during RecordStandby mode after performing a Picture Wipe/ Dissolve . . .

.... the point at which the scene ended is already

stored in memory.

If you start recording a new scene within 5 minutes of

the end of the previous recording (without having turned the camcorder’s power off), the previous scene wipes out, revealing the new scene.

Fader And Wipe Menu

Menu Effect

FADER — WHITE

EN23

Fade in or out with a white screen.

FADER — BLACK

FADER — MOSAIC

FADER — B.W

WIPE — CORNER

WIPE — WINDOW

WIPE — SLIDE

WIPE — DOOR

WIPE — SCROLL

WIPE — SHUTTER

DISSOLVE

WIPE — CORNER

WIPE — WINDOW

WIPE — SLIDE

WIPE — DOOR

WIPE — SCROLL

WIPE — SHUTTER

RANDOM

Fade in or out with a black screen.

Fade in or out with a full-screen mosaic effect.

Fade in to a colour screen from a black and white screen, or fade out from colour to black and white.

Wipe in on a black screen from the upper right to the lower left corner, or wipe out from lower left to upper right, leaving a black screen.

The scene starts in the centre of a black screen and wipes in toward the corners, or comes in from the corners, gradually wiping out to the centre.

Wipe in from right to left, or wipe out from left to right.

Wipe in as the two halves of a black screen open to the left and right, revealing the scene, or wipe out and the black screen reappears from left and right to cover the scene.

The scene wipes in from the bottom to the top of a black screen, or wipes out from top to bottom, leaving a black screen.

Wipe in from the centre of a black screen toward the top and bottom, or wipe out from the top and bottom toward the centre leaving a black screen.

The new scene gradually appears as the old one gradually disappears.

The new scene wipes in over the previous one from the upper right corner to the lower left corner.

The next scene gradually wipes in from the centre of the screen toward the corners, covering the previous scene.

The next scene gradually wipes in over the previous one from right to left.

The previous scene wipes out from the centre to the right and left, like a door being pushed open to reveal the next scene.

The new scene wipes in over the last one from the bottom of the screen to the top.

The new scene wipes in over the previous one from the centre toward the top and bottom of the screen.

When this function is activated, the camcorder randomly selects the effect used in scene transition (from , , , , , ,

, , , and ). The Picture Wipe/Dissolve function is not

available.

RECORDING

24 EN

IMPORTANT:

Some modes of Programme AE with special effects cannot be used with certain Fade/Wipe Effects (Z pg. 23). If an unusable mode is selected, its indicator blinks.

RECORDING

Advanced Features (cont.)

Programme AE With Special Effects

Set the Power Switch to “ ”.

Press MENU/BRIGHT. The Recording Menu appears.

MENU/BRIGHT Dial

Power Switch

Display

P. AE / EFFECT

1/500

SHUTTER 1/500 TWILIGHT SEPIA

B/W

MONOTONE

SEL.

CLASSIC FILM

STROBE

SLOW 4X

P.AE/EFFECT Menu

SHUTTER (Variable Shutter Speed) 1/50–The shutter speed is fixed at 1/50th of a

second. Black bands that usually appear when shooting a TV screen become narrower. 1/100–The shutter speed is fixed at 1/100th of a second. The flickering that occurs when shooting under a fluorescent light or mercury-vapour lamp is reduced. 1/250, 1/500–These settings allow fast-moving images to be captured one frame at a time, for vivid, stable slow-motion playback. The faster the shutter speed, the darker the picture becomes. Use the shutter function under good lighting conditions.

TWILIGHT

Makes evening scenes look more natural. White Balance (Z pg. 28) is initially set to , but can be changed to your desired setting. When Twilight is chosen, the camcorder automatically adjusts the focus from approx. 10 m to infinity. From less than 10 m, adjust the focus manually.

SEPIA

Recorded scenes have a brownish tint like old photos. Combine this with the Cinema mode for a classic look.

MONOTONE

Like classic black and white films, your footage is shot in B/W. Used together with the Cinema mode, it enhances the “classic film” effect.

PAUSE

Rotate MENU/BRIGHT to move the highlight bar to

“P.AE/EFFECT”, then press it.

Move the highlight bar to the desired mode by

rotating MENU/BRIGHT, then press it. The P.AE/EFFECT Menu disappears and the selected mode is activated. The selected mode indicator appears.

To turn off the selected mode, re-access the P.AE/

EFFECT Menu and move the highlight bar to “OFF” by rotating MENU/BRIGHT. Then press it.

NOTE:

Programme AE with special effects can be changed during recording or during Record-Standby.

CLASSIC FILM

Gives recorded scenes a strobe effect.

STROBE

Your recording looks like a series of consecutive snapshots.

SLOW (Slow Shutter)

You can light dark subjects or areas even brighter than they would be under good natural lighting.

SLOW 4X

The Shutter Speed is set to 1/12.5th of a second to quadruple the sensitivity.

SLOW 10X

The Shutter Speed is set to 1/5th of a second to provide 10 times the sensitivity.

NOTES:

●

When using “SLOW”, the image takes on a strobe-like effect.

●

Use “SLOW” only in dark areas.

●

The Manual Focus indication may appear and flash when “SLOW” is in use.

●

If the image is out of focus, adjust manually. It is also recommended that you use a tripod, if possible.

VIDEO ECHO

Adds a “ghost” to the subject, giving your recording a “fantasy” feeling.

Focus detection zone

NOTES:

●

If the lens is smeared or blurred, accurate focusing is not possible. Keep the lens clean, wiping with a piece of soft cloth if it gets dirty. When condensation occurs, wipe with a soft cloth or wait for it to dry naturally.

●

When shooting a subject close to the lens, zoom out first (Z pg. 14). If zoomed-in in the auto focus mode, the camcorder may automatically zoom out depending on the distance between the camcorder and the subject. This will not occur when “TELE MACRO” (Z pg. 20) is activated.

EN25

Focusing

AUTO FOCUS

The camcorder’s Full Range AF system offers continuous shooting ability from close-up (as close as approx. 5 cm to the subject) to infinity. However, correct focus may not be obtainable in the situations listed below (in these cases use manual focusing):

•When two subjects overlap in the same scene.

•When illumination is low.*

•When the subject has no contrast (difference in brightness and darkness), such as a flat, one-colour wall, or a clear, blue sky.*

•When a dark object is barely visible in the viewfinder.*

•When the scene contains minute patterns or identical patterns that are regularly repeated.

•When the scene is affected by sunbeams or light reflecting off the surface of a body of water.

•When shooting a scene with a high-contrast background.

* The following low-contrast warnings appear blinking:

, , and

MENU/BRIGHT Dial

Power Switch

FOCUS

NOTES:

●

When the power is turned off, Manual Focus will be reset to “AUTO”.

●

Be sure to focus the lens in the maximum telephoto position when you use the Manual Focus mode. If you focus in on a subject in the wide-angle position, sharply focused images cannot be obtained when zoomed up because the depth-of-field is reduced at longer focal lengths.

●

When the focus level cannot be adjusted any further or closer, “ ” or “ ” will blink.

FOCUS

MANUAL FOCUS

If you are using the viewfinder, you should already have made the necessary viewfinder adjustments (Z pg. 11).

Set the Power Switch to “ ”.

Press MENU/BRIGHT. The Recording Menu appears.

Rotate MENU/BRIGHT to move the highlight bar to

“FOCUS”, then press it.

Rotate MENU/BRIGHT to display “MANUAL”, then

press it. The Recording Menu disappears and “FOCUS” is displayed in the upper left corner. The focus is locked at this point.

To focus on a farther subject, rotate MENU/BRIGHT

downward. “ ” appears and blinks. To focus on a nearer subject, rotate MENU/BRIGHT

upward. “ ” appears and blinks.

Press MENU/BRIGHT. Focus adjustment is complete.

The indication changes from “FOCUS” to “MANUAL”.

•If you want to reset the focus, repeat from step 2.

To Change To Auto Focus . . .

.... rotate MENU/BRIGHT to display “AUTO” then press

it in step 4. The manual focus indicators disappear. Or, set the Power Switch to “ ”.

RECORDING

26 EN

MENU/BRIGHT Dial

Power Switch

RECORDING

Advanced Features (cont.)

Exposure Control

This feature automatically adjusts the iris for the best available picture quality, but you can override it and make the adjustment manually. Manual exposure adjustment is recommended in the following situations:

•

When shooting using reverse lighting or when the background is too bright.

•

When shooting on a reflective natural background such as at the beach or when skiing.

•

When the background is overly dark or the subject light.

Set the Power Switch to “ ”.

Press MENU/BRIGHT. The Recording Menu appears.

EXP.

Exposure control indicator

To darken the image

To brighten the image

Rotate MENU/BRIGHT to move the highlight bar to

“EXPOSURE”, then press it.

Rotate MENU/BRIGHT to display “MANUAL”, then

press it. The Recording Menu disappears. “EXP.” and the highlight bar on the exposure control indicator are displayed.

To brighten the image, rotate MENU/BRIGHT

downward. The exposure control indicator increases (maximum +6).

To darken the image, rotate MENU/BRIGHT upward. The exposure control indicator decreases (maximum –6).

Press MENU/BRIGHT. Exposure adjustment is

complete. The indication “EXP.” changes to “MANUAL” and the highlight bar on the exposure control indicator goes out.

•If you want to reset the exposure, repeat step 2.

To Return To Automatic Exposure Control . . .

.... rotate MENU/BRIGHT to display “AUTO” then press

it in step 4. The exposure control indicator disappears. Or, set the Power Switch to “ ”.

NOTE:

When the power is turned off, Exposure Control will be reset to “AUTO”.

MENU/BRIGHT Dial

Power Switch

EXP.

0 L

Iris lock indicator

EN27

Iris Lock

Use this function in the following situations:

●

When shooting a moving subject.

●

When the distance to the subject changes (so its size in the LCD monitor or the viewfinder changes), such as when the subject is backing away.

●

When shooting on a reflective natural background such as at the beach or when skiing.

●

When shooting objects under a spotlight.

●

When zooming.

When the subject is close, keep the iris locked. Even when the subject moves away from you, the image will not darken or brighten.

Before the following steps, perform steps 1 through 4 (Z pg. 26).

Adjust zoom so that the subject fills the LCD monitor

or the viewfinder, then press and hold MENU/ BRIGHT for over 2 seconds. The exposure control

indicator and “ ” appear, indicating that the iris is locked. Press MENU/BRIGHT. The indication displayed in the upper left corner changes from “EXP.” to “MANUAL”.

To Return To Automatic Iris Control . . .

.... rotate MENU/BRIGHT to display “AUTO” then press

it in step 4. The exposure control indicator and “ ” disappear. Or, set the Power Switch to “ ”.

RECORDING

To Lock The Exposure Control And The Iris . . .

.... after step 4, adjust the exposure rotating MENU/

BRIGHT. Then lock the iris in step 5. For automatic

locking, rotate MENU/BRIGHT to display “AUTO”, then press it in step 4. The iris becomes automatic after about 2 seconds.

Iris

Like the pupil of the human eye, it contracts in well-lit environments to keep too much light from entering, and dilates in dim environments to allow in more light.

28 EN

White Balance Adjustment

A term that refers to the correctness of colour reproduction under various lighting. If the white balance is correct, all other colours will be accurately reproduced. The white balance is usually adjusted automatically. However, more advanced camcorder operators control this function manually to achieve a more professional colour/tint reproduction.

Set the Power Switch to “ ”.

Press MENU/BRIGHT. The Recording Menu

appears.

Rotate MENU/BRIGHT to move the highlight

bar to “W.BALANCE”, then press it.

The Recording Menu disappears. “W.BAL.”

appears in the upper left corner and the currently selected mode indication is also displayed.

Rotate MENU/BRIGHT to display the desired

setting. “AUTO” – White balance is adjusted automati-

“ ” – White balance is set manually. “ ” – Outdoors on a sunny day. “ ” – Outdoors on a cloudy day. “ ” – A video light or similar type of lighting

Press MENU/BRIGHT again. Selection is

complete. The indication “W.BAL.” changes to “MANUAL”.

To Return To Automatic White Balance . . .

.... select “AUTO” in step 5. Or, set the Power

Switch to “ ”.

NOTE:

White balance cannot be used when Sepia or Monotone (Z pg. 24) is activated.

cally (factory preset).

is used.

RECORDING

Manual White Balance Operation

Perform Manual White Balance when shooting under various types of lighting.

Follow steps 1 through 5 of the white balance

adjustment, and select “ MAN.”.

Hold a sheet of plain white paper in front of the

subject. Adjust zoom or position yourself so that the white paper fills the screen.

Press MENU/BRIGHT until begins blinking.

When the setting is completed, stops blinking.

Press MENU/BRIGHT. The indication “W.BAL.”

changes to “MANUAL” and only the Manual White Balance indicator is displayed.

MENU/BRIGHT Dial

Power Switch

To Change The Tint For Recording . . .

.... in step 2, substitute coloured paper for white.

The white balance is adjusted based on the colour, changing the tint. Red paper = deeper green; blue paper = orange; yellow paper = deeper purple.

NOTES:

●

In step 2, it may be difficult to focus on the white paper. In such a case, adjust focus manually (Z pg. 25).

●

A subject can be shot under various types of lighting conditions indoors (natural, flourescent, candlelight, etc.). Because the colour temperature is different depending on the light source, the subject tint will differ depending on the white balance settings. Use this function for a more natural result.

●

Once you adjust white balance manually, the setting is retained even if the power is turned off or the battery removed.

Advanced Features (cont.)

White paper

PLAYBACK

Power Zoom Lever (VOL.)

Basic Playback

EN29

Load a tape (Z pg. 9).

Power lamp

Power Switch

Speaker

Rewind Button

Fast-Forward Button

Play/Pause Button

Stop Button

Still Playback:

1) Press 4/6 during playback.

2) To resume normal playback, press 4/6 again.

●

If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically

Pauses during playback.

Set the Power Switch to “ ”. To start playback,

press 4/6.

•To stop playback, press 5.

•Press 2 to rewind, or 3 to fast-forward the tape during Stop mode.

To Control The Speaker Volume . . .

.... slide the Power Zoom Lever (VOL.) towards “+” to

turn up the volume, or towards “–” to turn down the volume.

engaged. After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.

●

When

image. During this time, if PAUSE

is pressed, the image may not pause immediately while the camcorder stabilizes the still

(6)

on the remote control is pressed, Slow-Motion Playback will

start. This is not a malfunction.

Shuttle Search:

1) Press 3 for forward or 2 for reverse search during playback.

2) To resume normal playback, press 4/6.

●

During playback, press and hold 2 or 3. The search continues as long as you hold the button.

Allows high-speed search in either direction.

Once you release it, normal playback resumes.

●

A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.

Slow-Motion Playback, Frame-By-Frame Playback, Playback Zoom and Playback Special Effects

Available only with the RM-V711U remote control (provided) (Z pg. 40, 41).

PLAYBACK

NOTES:

●

If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn on again, set the Power Switch to “OFF”, then to “ ”.

●

The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV (Z pg. 32, 33).

●

You can also view the playback picture on the LCD monitor with it flipped over and retracted.

●

LCD monitor/viewfinder indications:

•

When power is supplied from a battery: the “ ” battery pack remaining power indicator is displayed. When power is supplied through the DC cord: “ ” does not appear.

•

During Stop mode, none of the indications are displayed.

●

Copyguarded tapes cannot be played back. Only a blue screen is displayed.

30 EN

MENU/BRIGHT Dial

Power Switch

PLAYBACK

Advanced Features

Playback Menu

The Playback Menu allows you to set the following functions:

Playback Sound (32 kHz, 48 kHz), Synchro Comp, Indication, Display and Time Code.

procedure applies to all except

The following

Synchro Comp (Z pg. 46,

47).

Set the Power Switch to “ ”.

Press MENU/BRIGHT. The Playback Menu appears.

Move the highlight bar to the desired function by

rotating MENU/BRIGHT. Press it to activate.

32kHz MODE SYNCHRO INDICATION DISPLAY TIME CODE

END

32kHz MODE SYNCHRO INDICATION DISPLAY TIME CODE

END

Display

FULL SOUND48kHz MODE SOUND1 0 . 0 ON ON OFF

Playback Menu

FULL SOUND SOUND1 SOUND2 FULL SOUND SOUND1 SOUND2

ON OFF ON OFF ON OFF

Rotate MENU/BRIGHT to display the desired setting.

Then press MENU/BRIGHT, and the highlight bar automatically moves to “END”.

•To set parameters for other functions, repeat steps 3 and 4.

Press MENU/BRIGHT again. The menu disappears.

EN31

Playback Sound

During playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture. (32 kHz is preset to “SOUND 1” and 48 kHz is preset to “FULL SOUND”.)

Recording sound

32 kHz

48 kHz

Display

FULL SOUND SOUND 1 SOUND 2 FULL SOUND SOUND 1 SOUND 2

Output sound

Stereo sound

Stereo sound “L” sound is output on both channels “R” sound is output on both channels

If you want to change the output sound of a tape recorded at 32 kHz, access the Playback Menu and, in step 3 on page 30, select “32 kHz MODE” and set it for “FULL SOUND”, “SOUND 1” or “SOUND 2”. For tapes recorded at 48 kHz, set in the same manner.

NOTES:

●

You can also use the provided RM-V711U remote control’s AUDIO MONITOR button to change the output sound (without having to access the Playback Menu). Make sure you point the remote control at the camcorder’s remote sensor.

●

The camcorder cannot detect the sound mode in which the recording was made during fast-forward or rewind. During playback the sound mode is displayed in the upper left corner.

INDICATION

You can make the playback sound, time code and date indications disappear. This function overrides the “TIME CODE” and “DISPLAY” settings in the Playback Menu. To change this setting, select “INDICATION” in the Playback Menu (Z pg. 30).

OFF– The playback sound, time code and date indications do not appear on the

Playback Screen.

ON– The playback sound, time code and date indications are displayed

according to how “TIME CODE” and “DISPLAY” are set in the Playback Menu (factory preset).

NOTE:

If “INDICATION” is set in the Date/Time Menu, “INDICATION” in the Playback Menu will also be set to the same setting (Z pg. 18, 20).

Display

32kHz/SOUND1

12 : 34 : 24

25 . 12 . 99

16 : 40

PLAYBACK

DISPLAY (Displaying the Date During Playback)

If the time has been set, the date is automatically recorded separately from the recorded video signal. You can display or remove the date anytime during playback. To change this setting, select “DISPLAY” in the Playback Menu (Z pg. 30).

ON– The date is displayed on the playback screen (factory preset). OFF– The date is not displayed.

TIME CODE (Displaying The Time Code During Playback)

You can display the time code on screen during playback. This is especially useful for editing. To change this setting, select “TIME CODE” in the Playback Menu (Z pg. 30).

ON– The time code is displayed on the playback screen. OFF– The time code does not appear (factory preset).

12 : 34 : 24

Minutes Seconds Frames*

*25 frames = 1 second

25 . 12 . 99

16 : 40

DEC 25 ’ 98

PM 5 : 30

32 EN

PLAYBACK

Basic Connections

These are some basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals.

Connection to a TV or VCR equipped with an S-VIDEO IN and A/V input (RCA type) connectors

The connectors are located beneath the cover.

Yellow: Not connected

White to Audio Output L

Red to Audio Output R

To S-Video Output

A/V cable (provided) [RCA plug to RCA plug]

S-Video cable (provided)

Yellow: Not connected

White to AUDIO L IN

Red to AUDIO R IN

To S-VIDEO IN

B. Connection to a TV or VCR equipped only with A/V input connectors

A/V cable (provided) [RCA plug to RCA plug]

Yellow to Video Output

White to Audio Output L

White to AUDIO L IN

Red to AUDIO R IN

To TV or VCR

VCR

To TV or VCR

VCR

The connectors are located beneath the cover.

Red to Audio Output R

Yellow to VIDEO IN

Make sure all units are turned off.

Connect the camcorder to a TV or VCR as

shown in the illustration (Z pg. 32).

If using a VCR . . . go to step 3. If not . . . go to step 4.

Connect the VCR output to the TV input,

referring to your VCR’s instruction manual.

Turn on the camcorder, the VCR and the TV.

Set the VCR to its AUX input mode, and set the

TV to its VIDEO mode.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

.... set “DISPLAY” to “ON” or “OFF” in the

Playback Menu (Z pg. 30).

•Time Code

.... set “TIME CODE” to “ON” or “OFF” in the

Playback Menu (Z pg. 30).

•Playback Sound Mode Display

.... set the Power Switch to “ ”. Press MENU/

BRIGHT and set “ON SCREEN” in the Date/ Time Menu (Z pg. 18 – 20) to “ON” or “OFF”. Then, set the Power Switch back to “ ”.

EN33

NOTES:

●

It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack (Z pg. 7).

●

To monitor the picture and sound from the camcorder without inserting a tape, set the camcorder’s Power Switch to “ ” or “ ”, then set your TV to the appropriate input mode.

●

Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

●

If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.

PLAYBACK

34 EN

Power Switch

Connector cover*

PLAYBACK

Advanced Connections

Connection To A Personal Computer

This camcorder can transfer still images to a PC using image transfer software (GR-DVL45/DVL40 owners: provided, GR-DVL25/DVL20 owners: optional software such as the HS-V4KIT) when connected as shown in the illustration. It is also possible to transfer still images to a PC with a DV connector-equipped capture board installed.

Make sure the camcorder and PC are turned off.

Connect the camcorder to your PC using the

appropriate cable as shown in the illustration.

Turn the camcorder’s Power Switch to “ ” and

turn on the PC.

To DV IN/OUT

Core filter

DV cable (optional)

Core filter

To D V connector

PC with DV connector-equipped capture board

To P C

PC connection cable**

To RS-232C

NOTES:

●

It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack (Z pg. 7).

●

Never connect the PC connection cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

●

The date/time information cannot be captured into the PC.

●

Refer to the instruction manuals of your software.

●

Also refer to the manufacturer’s instruction manual for the DV connector-equipped capture board.

●

Be sure to use a DV cable with core filters.

* When connecting cables, open this cover. ** Provided with GR-DVL45/DVL40, optional

for GR-DVL25/DVL20.

Power Switch

EN35

Connection To A Video Unit Equipped With A DV Connector

Connection to the GV-DT3 Digital Printer (optional) allows you to print out images or transfer them to a PC. It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector. This function is called Digital Dubbing (Z pg. 37), which offers virtually no image or sound deterioration.

Make sure all units are turned off.

Core filter

To DV IN connector

Digital Printer

Connector cover*

To DV IN/OUT

DV cable

(optional)

Video unit equipped with a DV input connector

Core filter

To D V connector

To PC connector

PC connection cable**

Make connections to the device you want to connect

to using a DV cable, as shown in the illustration.

If necessary, connect a PC connection cable to the

printer’s PC connector and the PC’s RS-232C connector.

Turn the camcorder’s Power Switch to “ ” and

turn on the other units.

NOTES:

●

It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack (Z pg. 7).

●

For Digital Dubbing, this camcorder can be connected only to one device at a time. This camcorder can also be used as a recorder.

●

If Still Playback, Slow-Motion Playback, Fast-Forward or Rewind is attempted with the camcorder connected to a video unit via the DV connector, the image will take on an effect similar to a coloured mosaic pattern or it will become black.

●

Also refer to the instruction manuals of the connected units.

●

Be sure to use a DV cable with core filters.

PLAYBACK

To RS-232C

* When connecting cables, open this cover. ** Provided with GR-DVL45/DVL40, optional

for GR-DVL25/DVL20.

36 EN

TAPE DUBBING

Tape Dubbing

VCR (Recording deck)

A/V cable (provided) [RCA plug to RCA plug]

White to Audio Output L

Red to Audio Output R

The connectors are located beneath the cover.

Yellow to Video Output*

To AUDIO, VIDEO*

-IN

and connectors

S-Video cable (provided)

To S-Video Output

Following the illustration, connect the camcorder and

the VCR. Also refer to pg. 32 and 33.

Set the camcorder’s Power Switch to “ ”, turn on

the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.

Engage the VCR’s AUX and Record-Pause modes.

Engage the camcorder’s Play mode to find a spot just

before the edit-in point. Once it is reached, press 4/ 6 on the camcorder.

Press 4/6 on the camcorder and engage the VCR’s

Record mode.

Engage the VCR’s Record-Pause mode and press

/6 on the camcorder.

Repeat steps 4 through 6 for additional editing, then

stop the VCR and camcorder when finished.

NOTES:

●

You can use Playback Zoom (Z pg. 40) or Playback Special Effects (Z pg. 41) in step 5.

●

Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

.....set “DISPLAY” to “ON” or “OFF” in the Playback

Menu (Z pg. 30).

•Time Code

.....set “TIME CODE” to “ON” or “OFF” in the

Playback Menu (Z pg. 30).

•Playback Sound Mode Display

.....set the Power Switch to “ ”. Press MENU/

BRIGHT and set “ON SCREEN” in the Date/Time Menu (Z pg. 18 – 20) to “ON” or “OFF”. Then, set the Power Switch back to “ ”.

* Connect when the S-Video cable is not used.

To DV IN/OUT

Core filter

To DV IN

RM-V711U (provided)

PLAY (

STOP (5)

Power Switch

The connectors are located beneath the cover.

DV cable (optional)

Video unit equipped with DV connector

)

EN37

Digital Dubbing

It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector. Since a digital signal is sent, there is little if any image or sound deterioration.

Make sure the camcorder’s power is off.

Connect the camcorder to your video unit equipped

with a DV connector using a DV cable as shown in the illustration.

Press 4 to play back the source tape.

While watching the playback on the monitor, engage

the DV connector-equipped video unit’s record mode from the spot on the source tape you want to begin recording.

NOTES:

●

It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack (Z pg. 7).

●

If the remote control is used when both the player and recorder are JVC video units, both units will perform the same operation. To prevent this from happening, press the buttons on both units.

●

For Digital Dubbing, this camcorder can be connected only to one device at a time. This camcorder can also be used as a recorder.

●

If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so that an unusual image is not dubbed.

●

Even though the DV cable is connected correctly, sometimes the image may not appear in step 3. If this occurs, turn off the power and make connections again.

●

If “Playback Zoom” (Z pg. 40), “Playback Special Effects” (Z pg. 41) or “Snapshot” is attempted during playback, only the original playback image recorded on the tape is output from the DV IN/OUT connector.

●

Be sure to use a DV cable with core filters.

To Use This Camcorder As A Recorder . . .

1. Turn the Power Switch to “ ”.

2. Connect the DV cable as shown in the illustration and load a cassette to record on.

3. Press the Recording Start/Stop Button to engage the Record-Pause mode. “DV IN” appears on the screen.

4. Press the Recording Start/Stop Button to start recording. “DV IN” changes to “

5. Press the Recording Start/Stop Button again to engage the Record-Pause mode. “ IN”.

NOTES:

●

During Digital Dubbing, the image is dubbed using the recording mode selected in the Mode Menu (Z pg. 10).

●

Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current “SOUND MODE” setting (Z pg. 20).

●

During Digital Dubbing, no signal is output from the audio/video output connector.

DV IN

”.

” returns to “DV

38 EN

Knob

Remote sensor

USING THE REMOTE CONTROL UNIT

Installing The Battery

The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible. The remote control uses one lithium battery

(CR2025).

Pull out the battery holder while pressing the

knob as shown.

Insert the battery in the holder, and be sure to

have the “+” mark visible.

Slide the holder back in until you hear a click.

•Read the caution concerning lithium batteries (Z pg. 2).

Transmitted beam effective area

30°

When using the remote control, be sure to point it at the remote sensor. The illustration shows the approximate transmitted beam effective area for indoor use. The transmitted beam may not be effective or may

30°

cause incorrect operation outdoors or when the remote sensor is directly exposed to sunlight or powerful lighting.

EN39

6 8

RM-V711U (provided)

Buttons

1 PAUSE IN Connector 2 Zoom (T/W) Buttons 3 DISPLAY Button 4 SHIFT Button 5 SLOW Rewind/Forward Buttons

Left/Right Buttons

6 FADE/WIPE Button 7 REW Button

8 EFFECT Button 9 EFFECT ON/OFF Button 0 Infrared beam transmitting window ! START/STOP Button @ AUDIO MONITOR Button # MBR SET Button $ Down Button

A. DUB Button

% Up Button

INSERT Button*

^ FF Button

& PLAY Button * PAUSE Button ( STOP Button ) R.A.EDIT Buttons

* This function is unavailable.

0 !

7 & 9 (

)

Functions

With the camcorder’s Power Switch set to the camera position (“ ” or “ ”).

—

Zoom in/out (Z pg. 14)

— —

—

— Transmits the beam signal. Functions same as the Recording Start/Stop button on the camcorder.

—

With the camcorder’s Power Switch set to “ ”.

Z pg. 43

Zoom in/out (Z pg. 40)

Z pg. 20

Z pg. 40 Z pg. 40

Z pg. 40 Z pg. 43

Rewind, Reverse Shuttle Search (Z pg. 29)

Z pg. 41 Z pg. 41

Z pg. 31

Z pg. 42 Z pg. 40

Z pg. 48 Z pg. 40

Fast-Forward, Forward Shuttle Search (Z pg. 29)

Playback start (Z pg. 29)

Pause (Z pg. 29) Stop (Z pg. 29)

Z pg. 42 – 47

—

40 EN

Zoom Buttons

SHIFT

Left or SLOW

Rewind Button

Right or SLOW

Forward Button

USING THE REMOTE CONTROL UNIT

Remote sensor

RM-V711U

(provided)

Press TNormal playback

Up Button

Down Button

PLAY PAUSE

STOP

To move image, press

(Right) while keeping SHIFT held down.

FEATURE:

Slow-Motion Playback

PURPOSE:

To allow slow-speed search in either direction.

OPERATION:

1) To change from normal to Slow-Motion Playback, press PAUSE (6) at the desired point.

2) Press SLOW (9 or 0). After approx. 1 minute in Slow

Rewind or approx. 2 minutes in Slow Forward, normal playback resumes.

n To stop Slow-Motion Playback, press PLAY (4).

NOTES:

●

During Slow-Motion Playback, due to digital image processing, the picture may take on a mosaic effect.

●

After SLOW displayed for a few seconds, followed by a blue screen for a few seconds. This is not a malfunction.

●

There may be a small margin between the slow-motion playback start point you chose and the actual start point for Slow-Motion Playback.

●

During Slow-Motion Playback, there will be disturbances in video and the picture may seem unstable, especially with steady images. This is not a malfunction.

●

During Slow-Motion Playback, press PAUSE pause playback.

FEATURE:

(9 or 0)

is pressed, the still image may be

Frame-By-Frame Playback

PURPOSE:

To allow frame-by-frame search.

OPERATION:

1) To change from normal to Frame-By-Frame Playback, press PAUSE (6) at the desired point.

2) Press PAUSE (6) repeatedly. Each time it is pressed, the

frame is played back.

FEATURE:

Playback Zoom

(cont.)

(6)

PURPOSE:

To magnify the recorded image up to 4X at any time during playback.

OPERATION:

1) Press PLAY (4) to find the scene of interest.

2) Press the Zoom Buttons (T/W) on the remote control.

Make sure the remote control is pointed at the camcorder's remote sensor. Pressing T zooms in.

3) You can move the image on screen around to find a particular portion of the picture. While holding down SHIFT, press (Left), (Right), (Up) and (Down).

n To end zoom, press and hold W until magnification

returns to normal. Or, press STOP (5) and then press PLAY (4).

NOTES:

●

Zoom can also be used during slow-motion and still playback.

●

Due to digital image processing, the quality of the image may suffer.

PLAYBACK EFFECT

OFF

CLASSIC FILM

B/W

MONOTONE

SEPIA

STROBE

VIDEO ECHO5

PLAY

EFFECT

PLAYBACK EFFECT Select Menu

Remote sensor

EFFECT ON/OFF

EN41

FEATURE: PURPOSE:

To allow you to add creative effects to the playback image.

OPERATION:

1) To start playback, press PLAY (4).

2) Point the remote control at the camcorder's remote

sensor and press EFFECT. The PLAYBACK EFFECT Select Menu appears.

3) Move the highlight bar to the desired effect by pressing EFFECT. The selected function is activated and after 2 seconds the menu disappears.

n To deactivate the selected effect, press EFFECT ON/

OFF on the remote control. Pressing it again re-

activates the selected effect.

n To change the selected effect, repeat from step 2

above.

NOTES:

●

When some Playback Special Effects are used, the Multi-Analyser 4 and Multi-Analyser 9 Snapshot modes (Z pg. 17) are not available.

●

The effects that can be used during playback are Classic Film, Monotone, Sepia, Strobe and Video Echo. The effects work the same in playback as they did in recording. Refer to page 24 for more information.

Playback Special Effects

RM-V711U

(provided)

42 EN

SHIFT

3 1

RM-V711U (provided)

VCR CODE LIST

VCR BRAND NAME

AKAI

BLAUPUNKT FERGUSON

GRUNDIG 1 4

HITACHI 6 6

JVC 9 1

A B C

MITSUBISHI 6 7

NEC 3 7

PANASONIC 1 3

USING THE REMOTE CONTROL UNIT

VCR (Recording deck)

789`

BUTTONS

(A) (B)

6 2 6 4 7 7

1 3

9 7 9 8 3 2

3 4

6 3

9 6 9 3

6 8

3 8

1 7 1 1 9 4 1 8

VCR BRAND NAME

PHILIPS

SANYO 3 6

SELECO, REX

SHARP 1 5

SONY

THOMSON, TELEFUNKEN, SABA, NORDMENDE

TOSHIBA 6 9

MBR SET

2 4 5

BUTTONS

(A) (B)

1 9 9 5 1 1 9 4 9 1 9 6 1 2 3 3 7 2

 

3 5 9 1

9 6

1 ` 6 5

6 ` 3 9 3 1



9 1 9 6 9 7 3 2

6 1

(cont.)

Random Assemble Editing [R.A.Edit]

Create edited videos easily using your camcorder as the source player. You can select up to 8 “cuts” for automatic editing, in any order you like. R.A.Edit is more easily performed when the RM-V711U MBR (Multi-Brand Remote) is set to operate with your brand of VCR (see VCR CODE LIST), but can also be performed by operating the VCR manually. Before operation, make sure the lithium battery is installed in the remote control RM-V711U (Z pg. 38).

SET REMOTE/VCR CODE

Turn off the power to the VCR and point the

remote towards the VCR’s infrared sensor. Then, referring to the VCR CODE LIST, press and hold MBR SET, and press button (A) and then (B). The code is automatically set once you release MBR SET, and the VCR’s power comes on.

Make sure the VCR’s power is on. Then, while

holding SHIFT, press the button on the remote for the desired function. The functions the remote can control are PLAY, STOP, PAUSE, FF, REW and VCR REC STBY (you do not need to press SHIFT for this one).

You are now ready to try Random Assemble Editing.

IMPORTANT

Although the MBR is compatible with JVC VCRs and those of many other makers, it may not work with yours or may offer limited functions.

NOTES:

●

If the VCR’s power does not come on in step 1, try another code from the VCR CODE LIST.

●

Some brands of VCR do not come on automatically. In this case, turn the power on manually and try step 2.

●

If the remote control is not able to control the VCR, use the controls on the VCR.

●

When the remote control’s battery runs out, the VCR brand you have set will be erased. In that case, replace the old battery with a new one to reset the VCR brand.

Connector cover** To JLIP*** Core filter

Yellow to Video Output*

White to Audio Output L

Editing cable (provided)

To AUDIO, VIDEO* and connectors

To Remote

PAUSE or R.A.EDIT

Connector cover**

To S-Video

S-Video cable (provided)

VCR

Output

Red to Audio Output R

A/V cable (provided) [RCA plug to RCA plug]

-IN

MAKE CONNECTIONS

Also refer to pg. 32 and 33.

To connect to:

A JVC VCR equipped with a remote pause connector . . .

... connect the editing cable to the Remote

PAUSE connector.

A JVC VCR not equipped with a remote pause connector but equipped with an R.A. EDIT connector . . .

... connect the editing cable to the R.A.EDIT

connector.

A VCR other than above . . .

... connect the editing cable to the RM-V711U’s

PAUSE IN connector.

Insert a recorded tape into the camcorder and set the

Power Switch to “ ”.

Turn the VCR power on, insert a recordable tape and

engage the AUX mode (refer to the VCR’s instructions).

SELECT SCENES

Point the remote control at the camcorder’s remote

sensor. Press PLAY (4) and then press R.A.EDIT ON/ OFF on the remote control.

The Random Assemble Editing Menu appears.

EN43

To PAUSE IN

DISPLAY

FADE/WIPE

RM-V711U (provided)

* Connect when the S-Video cable is not used. ** When connecting cables, open this cover. ***GR-DVL45/DVL40 owners: Use the plug

which has three yellow rings around the pin.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

.... set “DISPLAY” to “ON” or “OFF” in the Playback Menu (Z pg. 30).

•Time Code

.... set “TIME CODE” to “ON” or “OFF” in the Playback Menu (Z pg. 30).

•Playback Sound Mode Display

.... set the Power Switch to “ ”. Press MENU/BRIGHT and set “ON SCREEN” in the Date/Time Menu

(Z pg. 18 – 20) to “ON” or “OFF”. Then, set the Power Switch back to “ ”.

PLAY R.A.EDIT

ON/OFF

If using a Fade/Wipe at the beginning of the scene,

press FADE/WIPE on the remote control.

•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.

•You cannot use a Picture Wipe/Dissolve at the beginning of Programme 1.

NOTES:

●

Before Random Assemble Editing, make sure the indications do not appear on the TV monitor. If they do, they will be recorded onto the new tape.

●

When editing on a VCR equipped with DV input connector, the DV cable can be connected instead of the S-Video cable and Audio/Video cable.

CONTINUED ON NEXT PAGE

44 EN

Programme

I N OUT MODE

1 –– –– : – – ~

2 3 4 5 6 7 8

TIME CODE

TOTAL

~ ~ ~ ~ ~ ~

–– : –– 00 : 00

USING THE REMOTE CONTROL UNIT

SELECT SCENES (cont.)

Random Assemble Editing Menu

At the beginning of the scene, press EDIT IN/OUT on

the remote control. The Edit-In position appears in the Random Assemble Editing Menu.

At the end of the scene, press EDIT IN/OUT. The

Edit-Out position appears in the Random Assemble Editing Menu.

(cont.)

Remote sensor

RM-V711U (provided)

FADE/WIPE

EFFECT

EDIT IN/OUT

NOTES:

●

When choosing a scene, set Edit-In and Edit-Out points so that there is a relatively large difference between them.

●

If the search time for an in-point exceeds 5 minutes, the recording deck’s Record-Standby mode will be canceled and editing will not take place.

●

If there are blank portions before or after the Edit-In and Edit-Out points, a blue screen may be included in the edited version.

●

Since time codes register time only as accurately as seconds, the time code total time may not match the total programme time exactly.

●

Turning off the camcorder’s power erases all registered Edit-In and Edit-Out points.

●

If you select Sepia or Monotone mode from Programme AE with special effects, you cannot use the Dissolve or Black & White Fader. In this case the Dissolve or Black & White indicator begins blinking. Once the next Edit-In point is registered, the effect is turned off. To combine these effects, use Sepia or Monotone during recording, then use the Dissolve or Black & White Fader during Random Assemble Editing.

●

It is not possible to use Fade/Wipe effects and Programme AE with special effects during Random Assemble Editing using a DV cable.

CANCEL

PLAY

R.A.EDIT ON/OFF

If using a Fade/Wipe at the end of the scene, press

FADE/WIPE.

•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.

•If you select a Fade/Wipe effect for an Edit-Out point, the effect is automatically applied to the following Edit-In point.

•You cannot use a Picture Wipe/Dissolve at the end of the last scene.

•When you use Fade/Wipe effects, that time is included in the total time (this does not apply to Picture Wipe/Dissolve).

If using Playback Special Effects, press EFFECT

(Z pg. 41).

Repeat steps 6 through 9 to register additional scenes.

•To change previously registered points, press CANCEL on the remote control. The registered points disappear, one at a time, from the most recently registered point.

•If you are not using Fade/Wipe or Programme AE with special effects, repeat steps 6 and 7 only.

Recording Start/Stop Button

I N OUT MODE

1 00 : 25 ~ 02 : 05 –– 2 0 7 : 1 8 3 –– 03 : 33 4 0 9 : 3 0 ~ 13 : 1 5 5 1 5 : 5 5

6 –– –– : ––

7 8

TIME CODE

TOTAL

~ ~

~ ~ ~ ~

08 : 31–– 05 : 5 3

16 : 20–– ––

16 : 30

9 : 39

Remote Sensor

Random Assemble Editing Menu

B/W

EN45

AUTOMATIC EDITING TO VCR

Rewind the tape in the camcorder to the beginning of

the scene you want to edit and press PAUSE (6).

Point the remote control towards the VCR’s remote

sensor and press VCR REC STBY (q6), or manually engage the VCR’s Record-Pause mode.

Press the Recording Start/Stop Button on the

camcorder. Editing proceeds as programmed, right through to the end of the last registered scene.

•Pressing START/STOP on the remote control does not start editing.

•When dubbing is complete, the camcorder enters the Pause mode, and the recording deck enters its Record-Pause mode.

•If you do not register an Edit-Out point, the tape will be dubbed all the way to the end automatically.

Engage the Stop modes for the camcorder and the

VCR. To make the R.A.Edit counter display disappear, press R.A.EDIT ON/OFF on the remote control.

NOTES:

●

Pressing R.A.EDIT ON/OFF on the remote control clears all settings registered during Random Assemble Editing.

●

When the editing cable is connected to the remote control’s Pause In connector during dubbing, make sure the remote control is pointed at the VCR’s sensor, and the path between the two is unobstructed.

●

Random Assemble Editing may not function properly when using a tape including several duplicated time codes (Z pg. 16).

RM-V711U (provided)

REW

FADE/WIPE

EFFECT

EDIT IN/OUT

CANCEL

STOP

PAUSE R.A.EDIT

ON/OFF

VCR REC STBY

46 EN

Programme 1

I N OUT MODE

1 –– –– : – – ~

2 3 4 5 6 7 8

TIME CODE

TOTAL

(Recording deck)

~ ~ ~ ~ ~ ~ ~

–– : –– 00 : 00

VCR

Remote sensor

USING THE REMOTE CONTROL UNIT

For More Accurate Editing

Random Assemble Editing Menu

Some VCRs make the transition from Record-Pause to Record mode faster than others. Even if you begin editing for the camcorder and the VCR at exactly the same time, you may lose scenes you wanted, or find that you have recorded scenes you did not want. For a cleanly edited tape, confirm and adjust the timing of the camcorder against your VCR.

DIAGNOSING VCR/CAMCORDER TIMING

Play back the tape in the camcorder, then point the

remote control at the camcorder’s remote sensor and press R.A.EDIT ON/OFF. The Random Assemble Editing Menu appears.

Perform Random Assemble Editing on Programme 1

only. In order to check VCR and camcorder timing, select the beginning of a scene transition as your EditIn point.

Play back the dubbed scene.

•If any images from the scene prior to the transition you chose for your Edit-In point were recorded, that means your VCR moves too quickly from Record-Pause to Record mode.

•If the scene you tried to dub starts in progress, the VCR is slow to start recording.

(cont.)

RM-V711U (provided)

R.A.EDIT ON/OFF

32kHz MODE

SYNCHRO

INDICATION DISPLAY TIME CODE

END

32kHz MODE

SYNCHRO INDICATION DISPLAY TIME CODE

END

MENU/BRIGHT Dial

Display

FULL SOUND48kHz MODE SOUND1 0 . 0 ON ON OFF

FULL SOUND48kHz MODE SOUND1

0 . 0

ON ON OFF

Playback Menu

EN47

ADJUSTMENT OF VCR/CAMCORDER TIMING

Point the remote control at the camcorder’s remote

sensor and press R.A.EDIT ON/OFF to make the Random Assemble Editing menu disappear, then press MENU/BRIGHT. The Playback Menu appears.

Move the highlight bar to “SYNCHRO” by rotating

MENU/BRIGHT, then press it. The value for

“SYNCHRO” is highlighted.

Based on the diagnostics performed (Z pg. 46), you

can now increase the VCR’s speed by rotating MENU/BRIGHT downward. You can also slow down the VCR’s speed by rotating MENU/BRIGHT upward. The adjustment range is from –1.3 to +1.3 seconds, in

0.1-second increments.

Press MENU/BRIGHT twice.

Now perform Random Assemble Editing beginning with step 4 on page 43.

NOTES:

●

Before performing actual Random Assemble Editing, do a few Random Assemble Editing trial runs to check whether the value you have input is appropriate or not, and make adjustments accordingly.

●

Depending on the recorder, there may be situations where the timing difference cannot be fully corrected.

VCR

(Recording deck)

48 EN

AUDIO

MONITOR

DISPLAY

RM-V711U (provided)

Display

Speaker

PLAY

USING THE REMOTE CONTROL UNIT

Audio Dubbing

Audio Dub Standby mode

Power Switch

Remote sensor

Stereo microphone

A.DUB

PAUSE

STOP

The audio track can be customized only when recorded in the 32 kHz mode (Z pg. 20).

NOTES:

●

Audio Dubbing is not possible on a tape recorded at 48 kHz, on a tape recorded in the LP mode or on a blank portion of a tape.

●

To perform Audio Dubbing while watching on the television, make connections (Z pg. 32).

Play back the tape to locate the point where editing

will start, then press PAUSE (6).

While holding A.DUB (e) on the remote control,

press PAUSE (6). “6e” appears.

Press PLAY (4) , then begin “narrating”.

Speak into the microphone.

•To pause dubbing, press PAUSE (6).

To end Audio Dubbing, press PAUSE (6), then STOP

(5).

NOTES:

●

When editing onto a tape that was recorded at 32 kHz, the old and new soundtracks are recorded separately.

●

To select the desired sound for playback, press AUDIO MONITOR on the remote control.

●

If you dub onto a blank space on the tape, the sound may be disrupted. Make sure you only edit recorded areas.

●

If feedback or howling occurs during TV Playback, move the camcorder’s microphone away from the TV, or turn down the TV’s volume.

●

Sound is not heard from the speaker during Audio Dubbing.

●

If you change from 32 kHz to 48 kHz in mid-recording and then use the tape for Audio Dubbing, it is not effective from the point where 48 kHz recording began.

●

During Audio Dubbing, when the tape moves to scenes recorded in the LP mode, scenes recorded at 48 kHz or a blank portion, Audio Dubbing stops and “ERROR! REFER MANUAL” appears.

(cont.)

Recording sound

32 kHz

Display

FULL SOUND SOUND 2 SOUND 1

Output sound

Original and new tracks are combined and output in stereo. New track is output on both “L” and “R” channels in stereo. Original track is output on both “L” and “R” channels in stereo.

TROUBLESHOOTING

If, after following the steps in the chart below, the problem still exists, please consult your nearest JVC dealer.

The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC Power Adapter/Battery Charger, etc.) and wait a few minutes; and then re-connect it and proceed as usual from the beginning.

EN49

SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION

No power is supplied.

Recording cannot be performed.

There is no picture.

Some functions are not available using MENU/

BRIGHT.

The focus does not adjust automatically.

The cassette will not load properly.

Snapshot mode cannot be used.

The Snapshot colour looks strange.

•The power is not connected properly.

•The battery is dead.

•The tape’s erase protection switch is set to “SAVE”.

•The Power Switch is set to “ ”.

•“TAPE END” appears.

•The cassette’s cover is open.

•The camcorder is not getting power, or some other malfunction exists.

•The Power Switch is set to “ ”.

•Focus is set to “MANUAL”.

•The recording was done in a dark place, or the contrast was low.

•The lens is dirty or covered with condensation.

•The cassette is in the wrong position.

•The battery’s charge is low.

•The Squeeze mode is selected.

•The light source or the subject does not include white. Or there are various different light sources behind the subject.

•Connect the AC Power Adapter/Charger securely (Z pg. 7).

•Replace the dead battery with a fully charged one (Z pg. 6, 7).

•Set the tape’s erase protection switch to “REC” (Z pg. 9).

•Set the Power Switch to any position except “ ” or “OFF” (Z pg. 13).

•Replace with new cassette (Z pg. 9).

•Close the cassette’s cover.

•Turn the camcorder’s power off and on again (Z pg. 12).

•Set the Power Switch to “ ” (Z pg. 13).

•Set Focus to “AUTO” (Z pg. 25).

•Clean the lens and check the focus again (Z pg. 54).

•Set it in the right position (Z pg. 9).

•Install a fully charged battery (Z pg. 6, 7).

•Disengage the Squeeze mode (Z pg. 19).

•Find a white subject and compose your shot so that it also appears in the frame (Z pg. 17).

CONTINUED ON NEXT PAGE

50 EN

SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION

Digital Zoom does not work.

10.

Programme AE with special effects and Fade/ Wipe Effects do not work.

11.

The Black & White Fader does not work.

12.

The Dissolve function does not work.

13.

The Picture Wipe and Dissolve functions do not work.

14.

The picture wipe function does not work.

TROUBLESHOOTING

•16X optical zoom is selected.

•The Video Echo mode is activated.

•Picture Wipe or Dissolve are being used in a scene transition.

10.

•The Power Switch is set to “ ”.

11.

•The Sepia or Monotone mode is activated.

12.

•The Sepia, Monotone or Slow Shutter mode of Programme AE with special effects is activated.

•The Squeeze mode is selected.

•The previously selected mode of Programme AE with special effects was changed after the last selected scene for editing was registered.

13.

•The last selected editing scene is ending.

•At the end of the last selected scene for editing, the Power Switch was set to “OFF”.

•The power is off.

14.

•The Slow Shutter mode is activated.

•The Squeeze or Cinema mode is selected in the Mode Menu.

(cont.)

•Turn off the Video Echo mode (Z pg. 24).

•Wait until the Picture Wipe or Dissolve effects are completed (Z pg. 22, 23).

10.

•Set the Power Switch to “ ”.

11.

•Turn off Sepia and Monotone (Z pg. 24).

12.

•Turn off Sepia, Monotone or Slow Shutter before adding Dissolve to a scene transition (Z pg. 24).

•Make sure that the Squeeze mode in the Mode Menu is set to “OFF” (Z pg. 19).

•Make sure you have selected the mode of Programme AE with special effects you want before starting editing (Z pg. 24).

13.

•Select Picture Wipe or Dissolve before beginning recording. The effects are then automatically activated (Z pg. 22).

•Do not turn off the camcorder’s power after setting Edit-In and Edit-Out points, as they will all be erased (Z pg. 22).

•The camcorder automatically shuts off after 5 minutes have elapsed in the Record-Standby mode. Make sure you continue operations within 5 minutes after engaging RecordStandby mode (Z pg. 22).

14.

•Make sure the Squeeze mode, Cinema mode, or Slow Shutter mode is not activated when preparing to use the Picture Wipe function (Z pg. 19, 24).

SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION

15.

Scene transition does not go as expected.

16.

The Video Echo mode does not work.

17.

Even when Slow Shutter is not selected, the image looks like it is activated.

18.

There is no strobe when the Classic Film or Strobe mode is activated.

19.

White Balance cannot be activated.

20.

When shooting a subject illuminated by bright light, vertical lines appear.

21.

When the screen is under direct sunlight during shooting, the screen becomes red or black for an instant.

22.

During recording, the date/ time does not appear.

23.

The indicators and messages do not appear.

15.

•When using “Picture Wipe/ Dissolve” (Z pg. 22), there is a delay of a fraction of a second between the previous record stop-point and the Dissolve start-point. This is normal, but this slight delay becomes especially noticeable when shooting a fast-moving subject or during rapid panning.

16.

•The Picture Wipe or Dissolve functions are in use.

•The Squeeze mode is selected in the Mode Menu.

•A Fade-In or Fade-Out is in progress.

17.

•When shooting in the dark, the unit becomes highly sensitive to light and the image takes on an effect similar to Slow Shutter.

18.

•The Picture Wipe or Dissolve function is in use.

19.

•The Sepia or Monotone mode is activated.

20.

•This is a result of exceedingly high contrast, and is not a malfunction.

21.

•This is not a malfunction.

22.

•“DISPLAY” is set to “OFF” in the Date/Time Menu.

•Self-Recording is performed.

23.

•“ON SCREEN” is set to “OFF” in the Date/Time Menu.

•You have made the indicators disappear.

15.

————

16.

•Make sure the Squeeze mode is set to “OFF” (Z pg. 18, 19).

•Do not try to use the Video Echo mode during a Fade-In or Fade-Out (Z pg. 24).

17.

•If you want the lighting to look more natural, set GAIN UP to “AGC” or “OFF” in the Mode Menu (Z pg. 18,

19).

18.

•Do not try to use the Classic Film or Strobe mode during a scene transition (Z pg. 24).

19.

•Turn off Sepia or Monotone before setting White Balance (Z pg. 24).

20.

————

21.

————

22.

•Set “DISPLAY” to “ON” in the Date/Time Menu (Z pg. 21).

•During Self-Recording, the date/time does not appear (Z pg. 13).

•Set “INDICATION” to “ON” in the Date/Time Menu (Z pg. 21).

23.

•Set “ON SCREEN” to “ON” in the Date/Time Menu (Z pg. 21).

•Set “INDICATION” to “ON” in the Date/Time Menu (Z pg. 21).

EN51

CONTINUED ON NEXT PAGE

52 EN

SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION

24.

Images on the LCD monitor appear dark or whitish.

25.

The rear of the LCD monitor is hot.

26.

The indicators and the image colour on the LCD monitor are not clear.

27.

The LCD monitor or viewfinder indications blink.

28.

Coloured bright spots appear all over the LCD monitor or the viewfinder.

29.

During recording, sound cannot be heard.

30.

Play, Rewind and FastForward functions do not work.

31.

The tape is moving, but there is no picture.

TROUBLESHOOTING

24.

•In places subject to low temperature, images become dark due to the characteristics of the LCD monitor. When this happens, the displayed colours differ from those that are actually recorded. This is not a defect of the camcorder.

•When the LCD monitor’s fluorescent light reaches the end of its service life, images on the LCD monitor become dark. Consult your nearest JVC dealer.

25.

•The light used to illuminate the LCD monitor causes it to become hot.

26.

•This may occur when the surface or the edge of the LCD monitor is pressed.

27.

•Certain Fade/Wipe effects, certain modes of Programme AE with special effects, “DIS” and other functions that cannot be used together are selected at the same time.

28.

•The LCD monitor and the viewfinder are made with high-precision technology. However, black spots or bright spots of light (red, green or blue) may appear constantly on the LCD monitor or the viewfinder. These spots are not recorded on the tape. This is not due to any defect of the unit. (Effective dots: more than

99.99%)

29.

•This is normal.

30.

•The Power Switch is not set to “ ”.

31.

• Your TV has AV input terminals, but is not set to its VIDEO mode.

•The cassette’s cover is open.

24.

•Adjust the brightness and angle of the LCD monitor (Z pg. 12).

25.

•Close the LCD monitor to turn it off or set the Power Switch to “OFF”, and let the unit cool down.

26.

————

27.

•Re-read the sections covering Fade/Wipe effects, Programme AE with special effects and “DIS” (Z pg. 19, 22 – 24).

28.

————

29.

30.

•Set the Power Switch to

31.

•Set the TV to the mode or

•Close the cassette’s cover

————

“ ” (Z pg. 29).

channel appropriate for video playback (Z pg. 32,

33).

(Z pg. 9).

(cont.)

SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION

32.

The LCD monitor indications are distorted.

33.

Images on the LCD monitor are jittery.

34.

The LCD monitor, the viewfinder and the lens have become dirty (ex. fingerprints).

35.

An unusual mark appears.

36.

An error indication (E01 — E06) appears.

37.

The charger indicator on the AC Power Adapter/ Charger does not light.

38.

The recording mode indicator “LP” blinks.

39.

Picture does not appear on the LCD monitor.

40.

When the image is printed from the printer, a black bar appears at the bottom of the screen.

41.

When the camcorder is connected via the DV connector, the camcorder does not operate.

32.

•During playback of an unrecorded portion, Highspeed Search and still playback, LCD monitor indications appear distorted. This is not a defect.

33.

•The speaker volume is too great.

34.

————

35.

————

36.

•A malfunction of some kind has occurred. In this case the camcorder’s functions become unusable.

37.

•The temperature of the battery is extremely high/low.

•Charging is difficult in places subject to extremely high/low temperatures.

38.

•This occurs when recording in the LP mode is not available. After the indicator blinks, the recording mode switches to “SP” and recording goes on.

39.

•The lens cap is attached.

•␣ The LCD monitor is not open at an angle of over 45 degrees.

• The LCD monitor’s brightness setting is too dark.

40.

•This is not a malfunction.

41.

•The DV cable was plugged/ unplugged with power turned on.

32.

————

33.

•Turn the speaker volume down (Z pg. 29).

34.

•Wipe them gently with a soft cloth. Wiping strongly can cause damage.

35.

•Check the section of the manual that explains LCD monitor/viewfinder indications (Z pg. 60, 61).

36.

•Remove the power supply (battery pack, etc.) and wait a few minutes for the indication to clear. When it does, you can resume using the camcorder. If the indication remains even though you repeat the above two or three times, please consult your nearest JVC dealer.

37.

•To protect the battery, it is recommended to charge it in places with a temperature of 10°C to 35°C (50°F to 95°F) (Z pg. 55).

38.

————

39.

•Remove the lens cap (Z pg. 12).

•␣ Open the LCD monitor to an angle of over 45 degrees.

•␣ Adjust the brightness of the LCD monitor (Z pg. 12).

•␣ If the monitor is tilted upward to 180 degrees, open it fully (Z pg. 12).

40.

•By recording with “DIS” activated (Z pg. 19) this can be avoided.

41.

•Turn the camcorder’s power off and on again, then operate it.

EN53

54 EN

After Use

USER MAINTENANCE

Cleaning The Camcorder

Turn off the camcorder.

Press PUSH OPEN and open the LCD monitor.

Slide OPEN/EJECT in the direction of the arrow, then swing the cassette cover open until it locks. The cassette holder opens automatically. Remove the cassette.

Press “PUSH HERE” to close the cassette holder,

then close the cassette cover.

Close and lock the LCD monitor.

Slide BATTERY RELEASE and remove the battery

pack.

Replace the lens cap over the lens.

OPEN/EJECT Switch

PUSH HERE

PUSH OPEN Button

To clean the exterior, wipe gently with a soft

cloth. Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth.

Open the LCD monitor and wipe gently with a

soft cloth. Be careful not to damage the monitor. Close the LCD monitor.

To clean the lens, blow it with a blower brush,

then wipe gently with lens cleaning paper.

To clean the viewfinder, raise it to the vertical

position. Carefully lift the plastic tab on the bottom of the viewfinder, and open the cover

Insert a lens blower or soft cloth into the gap at

the bottom of the viewfinder and clean the interior of the viewfinder with it 2.

Replace the lens cap, making sure it locks in

place. Tilt the viewfinder back to the horizontal position.

NOTES:

●

Avoid using strong cleaning agents such as benzine or alcohol.

●

Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.

●

Mould may form if the lens is left dirty.

●

When using a cleaner or chemically treated cloth refer to the cautions of each product.

Cassette holder

BATTERY RELEASE Switch

Bottom of viewfinder

Remove.

Blower brush

Cover

CAUTIONS

EN55

Video Light

DANGER

n The video light can become extremely

hot. Do not touch it either while in operation or soon after turning it off, otherwise serious injury may result.

n Do not place the camcorder into the carrying case

immediately after using the video light, since it remains extremely hot for some time.

n When operating, keep a distance of about 30 cm

between the video light and people or objects.

n Do not use near flammable or explosive materials. n It is recommended that you consult your nearest

JVC dealer for replacing the video light.

Battery Packs

Terminals

Battery cap

The supplied battery pack is a lithium-ion battery. Before using the supplied battery pack or an optional battery pack, be sure to read the following cautions:

1. To avoid hazard . . .

.... do not burn.

.... do not short-circuit the terminals. When

transporting, make sure the provided battery cap is attached to the battery. If the battery cap is misplaced, carry the battery in a plastic bag.

.... do not modify or disassemble.

.... do not expose the battery to temperatures

exceeding 60°C, as this may cause the battery to overheat, explode or catch fire.

.... use only specified chargers.

2. To prevent damage and prolong service life . . .

.... do not subject to unnecessary shock.

.... charge in an environment where temperatures

are within the tolerances shown in the chart below. This is a chemical reaction type battery—cooler temperatures impede chemical reaction, while warmer temperatures can prevent complete charging.

.... store in a cool, dry place. Extended exposure

to high temperatures will increase natural discharge and shorten service life.

.... fully charge and then fully discharge the

battery every 6 months when storing the battery pack over a long period time.

.... remove from charger or powered unit when

not in use, as some machines use current even when switched off.

NOTES:

●

It is normal for the battery pack to be warm after charging, or after use.

Temperature Range Specifications

Charging............... 10°C to 35°C

Operation ............. 0°C to 40°C

Storage ................. –10°C to 30°C

●

Recharging time is based on room temperature of 20°C.

●

The lower the temperature, the longer recharging takes.

56 EN

CAUTIONS

(cont.)

Cassettes

To properly use and store your cassettes, be sure to read the following cautions:

1. During use . . .

.... make sure the cassette bears the Mini DV

mark.

.... be aware that recording onto prerecorded

tapes automatically erases the previously recorded video and audio signals.

.... make sure the cassette is positioned properly

when inserting.

.... do not load and unload the cassette

repeatedly without allowing the tape to run at all. This slackens the tape and can result in damage.

.... do not open the front tape cover. This exposes

the tape to fingerprints and dust.

2. Store cassettes . . .

.... away from heaters or other heat sources.

.... out of direct sunlight.

.... where they won’t be subject to unnecessary

shock or vibration.

.... where they won’t be exposed to strong

magnetic fields (such as those generated by motors, transformers or magnets).

.... vertically, in their original cases.

LCD Monitor

1. To prevent damage to the LCD monitor, DO NOT . . .

.... push it strongly or apply any shocks.

.... place the camcorder with the LCD monitor on

the bottom.

2. To prolong service life . . .

.... avoid rubbing it with coarse cloth.

3. Be aware of the following phenomena for LCD monitor use. These are not malfunctions:

•While using the camcorder, the surface around the

LCD monitor and/or the back of the LCD monitor may heat up.

•If you leave power on for a long time, the surface

around the LCD monitor becomes hot.

Main Unit

1. For safety, DO NOT . . .

.... open the camcorder’s chassis.

.... disassemble or modify the unit.

.... short-circuit the terminals of the battery pack.

Keep it away from metallic objects when not in use.

.... allow inflammables, water or metallic objects

to enter the unit.

.... remove the battery pack or disconnect the

power supply while the power is on.

.... leave the battery pack attached when the

camcorder is not in use.

2. Avoid using the unit . . .

.... in places subject to excessive humidity or dust.

.... in places subject to soot or steam such as near

a cooking stove.

.... in places subject to excessive shock or

vibration.

.... near a television set.

.... near appliances generating strong magnetic or

electric fields (speakers, broadcasting anten-

nas, etc.).

.... in places subject to extremely high (over 40°C)

or extremely low (under 0°C) temperatures.

3. DO NOT leave the unit . . .

.... in places of over 50°C.

.... in places where humidity is extremely low

(below 35%) or extremely high (above 80%).

.... in direct sunlight.

.... in a closed car in summer.

.... near a heater.

4. To protect the unit, DO NOT . . .

.... allow it to become wet.

.... drop the unit or strike it against hard objects.

.... subject it to shock or excessive vibration

during transportation.

.... keep the lens directed at extremely bright

objects for long periods.

.... expose the lens to direct sunlight.

.... carry it by holding the LCD monitor or the

viewfinder.

.... swing it excessively when using the shoulder

strap or the grip.

5. Dirty heads can cause the following problems:

•No picture during playback.

•Blocks of noise appear during playback.

•During recording, the Head Clog Warning indicator “ ” appears.

In such cases, use an optional Cleaning Cassette. Insert it and play back. If the cassette is used more than once consecutively, damage to the video heads may result. After the camcorder plays back for about 20 seconds, it stops automatically. Also refer to the Cleaning Cassette’s instructions. If, after using the Cleaning Cassette, the problems still exist, consult your nearest JVC dealer. Mechanical moving parts used to move the video heads and video tape tend to become dirty and worn out over time. In order to maintain a clear picture at all times, periodic check-ups are recommended after using the unit for about 1,000 hours. For periodic check-ups please consult your nearest JVC dealer.

EN57

About moisture condensation . . .

● You have observed that pouring a cold liquid into a glass will cause drops of water to form on the glass‘ outer surface. This same phenomenon occurs on the head drum of a camcorder when it is moved from a cool place to a warm place, after heating a cold room, under extremely humid conditions or in a place directly subjected to the cool air from an air conditioner.

● Moisture on the head drum can cause severe damage to the video tape, and can lead to internal damage to the camcorder itself.

Serious malfunctioning

If malfunctioning occurs, stop using the unit immediately and consult your local JVC dealer.

The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC Power Adapter/Battery Charger, etc.) and wait a few minutes and then re-connect it and proceed as usual from the beginning.

58 EN

INDEX

Controls, Connectors And Indicators

*&^ (

65 74

)

e 90q

Controls

1 Battery Release Switch

[BATTERY RELEASE] .............................. Z pg. 7

2 PUSH OPEN Button ............................... Z pg. 9

3 Video Light Switch

[LIGHT OFF/AUTO/ON]

(GR-DVL45/DVL40 only) ..................... Z pg. 15

4 OPEN/EJECT Switch ............................... Z pg. 9

5 Snapshot Button [SNAPSHOT] ............. Z pg. 17

6 • Power Zoom Lever [T/W] .................. Z pg. 14

•Speaker Volume Control [VOL.] ........ Z pg. 29

7 • MENU/BRIGHT Dial

[+, –, PUSH] ................................. Z pg. 8, 18

•LCD Monitor/Viewfinder Brightness

Control ............................................. Z pg. 12

8 Snapshot Mode Button [MODE] ........... Z pg. 17

9 Recording Start/Stop Button .................. Z pg. 12

0 Power Switch [ , OFF, , ] ...... Z pg. 13

! Rewind Button [REW] .......................... Z pg. 29

@ Stop Button [STOP] .............................. Z pg. 29

# Fast-Forward Button [FF] ...................... Z pg. 29

$ Play/Pause Button [PLAY/PAUSE] ......... Z pg. 29

% Dioptre Adjustment Control ................. Z pg. 11

EN59

Connectors

The connectors ^ to e are located beneath a cover.

Video Output Connector [V] ................ Z pg. 32

& Audio Output Connector [L] ................ Z pg. 32

* S-Video Output Connector [S] .............. Z pg. 32

( Audio Output Connector [R] ................ Z pg. 32

) DC IN Connector ................................... Z pg. 7

q J Terminal [JLIP (Joint Level Interface Protocol)

Connector] .......................................... Z pg. 43

•Connect the editing cable when performing Random Assemble Editing (Z pg. 42 – 47).

•It is used to connect the camcorder to a device such as a personal computer. For further details, consult your nearest JVC dealer.

•JLIP-controlled editing from the camcorder to a VCR is not possible if the VCR is not equipped with a J terminal.

w PC Connector ...................................... Z pg. 34

It is used to connect the camcorder to the serial port of a personal computer. For further details, consult your nearest JVC dealer.

e Digital Video Connector

[DV IN/OUT] (i.link*) .................... Z pg. 35, 37

* i.Link refers to the IEEE1394-1995 industry

specification and extensions thereof. The logo is used for products compliant with the i.Link standard.

Indicators

r Power Lamp ........................................ Z pg. 13

Other Parts

t Battery Pack Mount ............................... Z pg. 7

y • Camera Sensor

Be careful not to cover this area; a sensor necessary for shooting is built-in here.

•Remote Sensor .................................. Z pg. 38

u Video Light (GR-DVL45/DVL40 only) ... Z pg. 15

i Stereo Microphone .............................. Z pg. 48

o Viewfinder ........................................... Z pg. 11

p Speaker ............................................... Z pg. 29

Q Shoulder Strap Eyelets .......................... Z pg. 11

W Grip Strap ............................................ Z pg. 11

E LCD Monitor ....................................... Z pg. 12

R Tripod Mounting Socket ....................... Z pg. 11

T Stud Hole ............................................ Z pg. 11

60 EN

LCD Monitor/Viewfinder Indications During Recording

INDEX

Indications

1* 3 6* 7*5*42

D T

( *

)

450X

No. Function

1* Displays the operation mode position. (Z pg. 13) 2 Appears when Auto Slow Shutter is engaged (“GAIN UP” is set to “AUTO”). (Z pg. 19) 3 Appears when in the Squeeze or Cinema mode. (Z pg. 19) 4 Appears when Digital Image Stabiliser (“DIS”) is engaged. (Z pg. 19) 5* Appears when in the Record-Standby mode. (Z pg. 12) 6* Displays the recording mode (SP or LP). (Z pg. 10) 7* Displays the tape remaining time. (Z pg. 12) 8 Appears during recording. (Z pg. 12) 9 Appears while the tape is running. (Z pg. 12) 0 Appears when taking a Snapshot. (Z pg. 17) ! Appears when the wind cut mode is engaged to cut down on noise created by wind. (Z pg. 20) @ Displays the sound mode for approx. 5 seconds after turning on the camcorder. (Z pg. 20) #* Displays the date/time. (Z pg. 21) $ Displays the brightness of the LCD monitor. (Z pg. 12) % Appears when the iris is locked. (Z pg. 27) ^ Appears when the focus is adjusted manually. (Z pg. 25) & Appears when the exposure is adjusted. (Z pg. 26) * Appears when the white balance is adjusted. (Z pg. 28) ( Displays the selected Programme AE with special effects. (Z pg. 24) ) Displays the selected Fade/Wipe effect. (Z pg. 22) q Appears during zooming. (Z pg. 14)

Zoom level indicator Approximate zoom ratio

MANUAL

1/250

0 L PHOTO

160XSET DATE / TIME !

SOUND

12 : 34 : 24

BRIGHT

PAUSE

E01

TAPE !

MODE5S 32kHz

– – – – –6– – – – –

LP 35 min

REC

444

25 . 12 . 99

16 : 40

9 0 !

@ #* $

* :Setting “INDICATION” to “OFF” in the Date/Time Menu lets you remove indications marked with * from the

screen (Z pg. 21).

LCD Monitor/Viewfinder Indications During Playback

No. Function

2 3

1 Displays the sound mode. (Z pg. 31) 2 Displays the tape speed.

32kHz

01 : 28 : 15

VOLUME

SOUND 1

HIGH SPEED

25 . 12 . 99

– – – – –6– – – – –

LP PS

WIDE

16 : 40

3 Appears while a tape is running.

4 3 2 6 : Pause 64: Forward slow-motion 1

6 : Reverse slow-motion e : Audio Dubbing 6e : Audio Dubbing Pause

4 Displays the date/time. (Z pg. 31) 5 BRIGHT: Displays the brightness

VOLUME: Displays the speaker volume.

56 4

6 Displays the time code. (Z pg. 31)

Warning Indications

Indications Function

Displays the battery remaining power.

Remaining power level: high Remaining power level: exhausted

As the battery power comes close to nil, the battery indicator blinks. When the battery power is exhausted, power turns off automatically.

Appears when no tape is loaded, or when the erase protection tab is set to “SAVE”. (Z pg. 9)

Appears if dirt is detected on the heads during recording. (Z pg. 56)

EN61

: Playback : Fast-Forward/Shuttle search : Rewind/Shuttle search

of the LCD monitor. (Z pg. 12)

(Z pg. 29)

TAPE!

LENS COVER

TAPE END

ERROR!

REFER MANUAL

E01 — E06

Appears if condensation occurs. When this indication is displayed, the camcorder turns off automatically.

Appears for 10 seconds after power is turned on if there is no tape loaded. Appears for 5 seconds after power is turned on if the lens cap is attached. Appears when the tape ends during recording or playback. (Z pg. 13) Appears when Audio Dubbing is unavailable. (Z pg. 48)

The error indications (E01 — E06) show what type of malfunction has occured. When an error indication appears, the camcorder turns off automatically. Remove the power supply (battery, etc.) and wait a few minutes for the indication to clear. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer. (Z pg. 53)

62 EN

AC Power Adapter/Charger .................... Z pg. 6, 7

Audio Dubbing ........................................ Z pg. 48

Auto Focus ............................................... Z pg. 25

Auto Shut off ......................................Z pg. 13, 29

Battery Low .............................................. Z pg. 61

Battery Pack .....................................Z pg. 6, 7, 55

Brighten The LCD Monitor .......................Z pg. 12

Charge The Battery Pack ............................ Z pg. 6

Cinema .................................................... Z pg. 19

Classic Film ............................................. Z pg. 24

Clean The Camcorder .............................. Z pg. 54

Connections ........................... Z pg. 7, 32 – 37, 43

Darken The LCD Monitor ........................ Z pg. 12

Date/Time Display ............................. Z pg. 21, 31

Date/Time Settings ..................................... Z pg. 8

Demonstration Mode ............................... Z pg. 20

Digital Dubbing ....................................... Z pg. 37

Digital Zoom ..................................... Z pg. 14, 19

DIS (Digital Image Stabiliser) .................... Z pg. 19

Dioptre Adjustment .................................. Z pg. 11

Dubbing .................................................. Z pg. 36

Erase Protection ......................................... Z pg. 9

Exposure Control ..................................... Z pg. 26

Fade-In/Out ............................................. Z pg. 22

Fast-Forward The Tape ............................. Z pg. 29

Gain Up ................................................... Z pg. 19

Grip Adjustment....................................... Z pg. 11

Iris ........................................................... Z pg. 27

Iris Lock ................................................... Z pg. 27

Journalistic Shooting ................................ Z pg. 13

LCD Monitor/Viewfinder Indications ... Z pg. 60, 61

Load A Tape ............................................... Z pg. 9

Manual Focus .......................................... Z pg. 25

Mode Menu ............................................. Z pg. 19

Monotone ................................................ Z pg. 24

Motor Drive Mode ................................... Z pg. 17

INDEX

Terms

Picture Wipe/Dissolve .............................. Z pg. 22

Playback Menu ........................................ Z pg. 30

Playback Special Effects ........................... Z pg. 29

Playback Zoom ........................................Z pg. 29

Power Switch Position ............................. Z pg. 13

Programme AE With Special Effects..........Z pg. 24

Provided Accessories ................................. Z pg. 5

Random Assemble Editing ................ Z pg. 42 – 47

Record-Standby ....................................... Z pg. 12

Recording Menu ...................................... Z pg. 19

Recording Mode ...................................... Z pg. 10

Remote Control ........................................ Z pg. 38

Rewind The Tape ..................................... Z pg. 29

Self-Recording ......................................... Z pg. 13

Sepia ........................................................ Z pg. 24

Set Remote Control/VCR Code .................Z pg. 42

Shoulder Strap Attachment ....................... Z pg. 11

Shutter Speed ...........................................Z pg. 24

Shuttle Search .......................................... Z pg. 29

Slow-Motion Playback ............................. Z pg. 29

Slow Shutter ............................................. Z pg. 24

Snapshot Mode ........................................ Z pg. 17

Sound Mode ............................................ Z pg. 31

Specifications ........................................... Z pg. 63

Squeeze ................................................... Z pg. 19

Still Playback ........................................... Z pg. 29

Strobe ...................................................... Z pg. 24

System Menu ........................................... Z pg. 20

Tele Macro ...............................................Z pg. 20

Time Code ............................................... Z pg. 16

Tripod Mounting ...................................... Z pg. 11

Twilight ....................................................Z pg. 24

Unload A Tape ........................................... Z pg. 9

Video Echo .............................................. Z pg. 24

Video Light .............................................. Z pg. 15

White Balance ......................................... Z pg. 28

Wide Mode .............................................. Z pg. 19

Wind Cut ................................................. Z pg. 20

Wipe In/Out ............................................. Z pg. 22

Zooming .................................................. Z pg. 14

SPECIFICATIONS

EN63

Camcorder

General

Power supply : DC 6.3 V (Using AC Power

Adapter/Charger) DC 7.2 V (Using battery pack)

Power consumption

LCD monitor off,

viewfinder on GR-DVL45/

DVL40 : Approx. 4.7 W

GR-DVL25/

DVL20 : Approx. 4.6 W

LCD monitor on,

viewfinder off GR-DVL45/

DVL40 : Approx. 5.8 W

GR-DVL25/

DVL20 : Approx. 5.6 W

Video light

(GR-DVL45/

DVL40 only) : Approx. 3.6 W Format : DV Format (SD mode) Signal format : PAL Standard Video signal

recording format : Digital Component Recording Cassette : Mini DV Cassette Tape Speed : SP : 18.8 mm/s

LP : 12.5 mm/s

Maximum

recording time : SP : 60 min.

LP : 90 min.

(using M-DV60ME cassette)

Pickup : 1/4" CCD Lens : F 1.6, f = 3.9 to 62.4 mm, 16:1

Power Zoom Lens

Filter diameter : ø40.5 mm LCD monitor

GR-DVL45/

DVL40 : 3.5" diagonally measured, LCD

panel/TFT active matrix system

GR-DVL25/

DVL20 : 2.5" diagonally measured, LCD

panel/TFT active matrix system

Viewfinder

GR-DVL45/

DVL40 : Electronic viewfinder with 0.55"

colour LCD

GR-DVL25/

DVL20 : Electronic viewfinder with 0.24"

black/white LCD

Speaker : Monaural Operating

temperature : 0°C to 40°C

Operating

humidity : 35% to 80%

Storage

temperature : –20°C to 50°C

Dimensions : 188 (W) x 118 (H) x

88 (D) mm (with the LCD monitor closed and the viewfinder pushed down)

Weight

GR-DVL45/

DVL40 : Approx. 700 g

GR-DVL25/

DVL20 : Approx. 690 g

Connectors

S-Video : Y : 1 Vp-p, 75 Ω, analogue

output

C : 0.29 Vp-p, 75 Ω, analogue

output

JLIP : ø3.5 mm, 4-pole, mini-head

jack (compatible with RC-5325 plug)

PC : ø2.5 mm, 3-pole Video output : 1 Vp-p, 75 Ω unbalanced,

analogue output

Audio output : –8 dBs, 1 kΩ analogue output,

stereo

DV input/output : 4-pin, IEEE1394 compliant

AC Power Adapter/Charger

AA-V20A or AA-V20EA

Power

requirement : AC 110 V to 240 V`, 50/60 Hz

Power

consumption : 23 W

Output

Charge : DC 7.2 V , 0.77 A

VTR : DC 6.3 V , 1.8 A Dimensions : 68 (W) x 38 (H) x 110 (D) mm Weight

AA-V20A : Approx. 255 g

AA-V20EA : Approx. 260 g

Specifications shown are for SP mode unless otherwise indicated. E & O.E. Design and specifications subject to change without notice.

GR-DVL45

GR-DVL40

GR-DVL25

GR-DVL20

A/EA

Printed in Japan 0899AYV*UN*VP

VICTOR COMPANY OF JAPAN, LIMITED

JVC GR-DVL45, GR-DVL20, GR-DVL25, GR-DVL40 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual