DVD & HDD VIDEO RECORDER
DR-MH300SE/BE
HDD DVD
STANDBY/ON
INSTRUCTIONS
RAM/RW
NAVIGATION
PR
ENTER
GUIDE
PR
LPT1048-001A
®
EN
2 EN
SAFETY FIRST
Safety Precautions
The rating plate and the safety caution are on the rear of the unit.
WARNING: DANGEROUS VOLTAGE INSIDE
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
CAUTION:
A UNIT IS A CLASS 1 LASER PRODUCT. HOWEVER THIS
UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE
HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE
SURE TO OPERATE THE UNIT CORRECTLY AS
INSTRUCTED.
WHEN THIS UNIT IS PLUGGED INTO THE WALL OUTLET,
DO NOT PLACE YOUR EYES CLOSE TO THE OPENING OF
THE DISC TRAY AND OTHER OPENINGS TO LOOK INTO
THE INSIDE OF THIS UNIT.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
CLASS 1 LASER PRODUCT
REPRODUCTION OF LABELS
WARNING LABEL INSIDE OF THE UNIT
IMPORTANT:
8 Please read the various precautions on page 2 and 3 before
installing or operating the unit.
8 It should be noted that it may be unlawful to re-record pre-
recorded tapes, DVDs, or discs without the consent of the
owner of copyright in the sound or video recording,
broadcast or cable programme and in any literary, dramatic,
musical, or artistic work embodied therein.
CAUTION:
8 When you are not using the unit for a long period of time, it is
recommended that you disconnect the power cord from the
mains outlet.
8 Dangerous voltage inside. Refer internal servicing to
qualified service personnel. To prevent electric shock or fire
hazard, remove the power cord from the mains outlet prior to
connecting or disconnecting any signal lead or aerial.
®
● Manufactured under licence from Dolby Laboratories. ADolbyB and double-D symbol are trademarks of Dolby Laboratories.
● ADTSB and ADTS DIGITAL OUTB are trademarks of Digital Theater Systems, Inc.
●
GUIDE Plus+, SHOWVIEW, G-LINK are (1) registered trademarks or trademarks of, (2) manufactured under license from and (3) subject of
various international patents and patent applications owned by, or licensed to, Gemstar-TV Guide International, Inc. and/or its related
affiliates.
GEMSTAR-TV GUIDE INTERNATIONAL, INC. AND/OR ITS RELATED AFFILIATES ARE NOT IN ANY WAY LIABLE FOR THE
ACCURACY OF THE PROGRAM SCHEDULE INFORMATION PROVIDED BY THE GUIDE PLUS+ SYSTEM. IN NO EVENT SHALL
GEMSTAR-TV GUIDE INTERNATIONAL, INC. AND/OR ITS RELATED AFFILIATES BE LIABLE FOR ANY AMOUNTS
REPRESENTING LOSS OF PROFITS, LOSS OF BUSINESS, OR INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES IN
CONNECTION WITH THE PROVISION OR USE OF ANY INFORMATION, EQUIPMENT, OR SERVICES RELATING TO THE
GUIDE PLUS+ SYSTEM.
● This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual
property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended for home and other limited viewing users only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
I
11
NITIAL SETTINGS
EN
GUIDE Plus+® Setup
Before you can start using your GUIDE Plus+ system you must
first connect your television equipment properly and then
complete an on-screen setup process so that the GUIDE Plus+
system knows what equipment you have and which "Host
Channel" to use for your household.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/DVD switch to DVD.
1 Press the GUIDE.
● The GUIDE Plus+ setup menu appears
● Language and Country setting are already input from the
JVC's initial setup.
2 Press selection keys to select "Postal Code" and press
number keys or selection keys to enter your postal code.
● The postal code you enter must be correct, and must
represent a postal code in the identified country. If it is not
correct or dose not match the country, you will receive no or
incorrect TV listings data.
● If you do not use an external receiver, leave the fields as-is,
with "None" indicated.
3 Press GUIDE to complete the setting
External Receiver Users
If you use an external receiver you will have to set it up for the
GUIDE Plus+ system as following.
1 Press selection keys to select "External Receiver 1", "2", or "3",
then press ENTER.
2 Press selection keys to select reception ("terrestrial", "cable"
or "satellite")
3 Press selection keys to select provider if applicable
4 Press selection keys to select the brand of your external
receiver
5 Identify which socket your external receiver is plugged into
("L-1" or "L-2")
● The unit will now try to communicate with your external receiver
via the G-LINK cable. The on-screen prompt will ask you if the
receiver has changed to a specified channel.
6 If the external receiver changed channel correctly, Press
selection keys to select "YES" and press ENTER.
7 Press GUIDE to complete the setting.
IMPORTANT:
If eternal receiver did not change channels, or if receiver brand is
not indicated in the on-screen list, refer to ALTERNATE SETUP.
Identify the GUIDE Plus+ Host Channel
The TV listings data available in the GUIDE Plus+ system is
distributed throughout Europe by selected broadcasters called
"Host Channel". It is important that your unit "identifies" the host
channel for your region and setup correctly.
List of Host Channels
Country/Region
(Language)
Austria Eurosport
Belgium (Flemish) Music Factory
France Canal + Analog only
Germany Eurosport
Italy Sport Italia Analog only
Netherlands Music Factory
Spain Tele 5 Analog only
Switzerland
(German)
United Kingdom ITV, Eurosport ITV is analog only.
Host
Channels
(TMF)
(TMF),
Eurosport
Eurosport
Helpful Hints
Use TMF if you live
in Amsterdam,
Eindhoven or
Rotterdam
Use Eurosport if you
are a SKY subscriber
and you no longer
have a terrestrial
antenna available.
In Order to Receive Data
1 Leave the unit in "STANDBY" overnight.
External Receiver Users
1 Leave your external receiver "ON" overnight.
2 Leave the unit in "STANDBY" overnight.
ALTERNATE SETUP
If your external receiver is not in the list or your external receiver
could not be controlled properly by the unit, please follow these
steps.
1 For External Receiver brand, select "None".
2 Press GUIDE to exit the set up menu.
3 Tune your external receiver to your "Host Channel"(See list of
Host Channels) and Leave it "ON" overnight.
4 The unit must be on "STANDBY" overnight.
The next day, go back into the GUIDE Plus+ setup menu.
● The new external receiver codes might have been added.
5 Select the brand of your external receiver.
I
S
Inf
NITIAL SETTING
EN 12
About GUIDE Plus+®
All Features and Areas are displayed in a convenient, colour-coded layout that lets you easily access all the great possibilities of the GUIDE
Plus+ system.
Function of Remote Control Keys
Guide
Selection keys
You can access GUIDE Plus+ on your TV screen.
To navigate around the GUIDE Plus+ menu.
ENTER
Action
Info
To confirm a selection or to leave GUIDE Plus+ and tune directly
to a currently running show.
Red、Green、Yellow、Blue button. Several features such as
On-Button-Record and Home.
To access the extended information box for a long synopsis.
Previous/Next Day
PAG E - /+
To go directly to the next day or back day to the present day.
To move one page up and down.
Number keys
For direct entries of numbers.
Common Elements
Grid:
Disply of TV listings information by channel and time, seven
days in advance.
Video Window:
You can continue to watch the current programme while
consulting GUIDE Plus+.
Menu Bar:
Access to the different Areas of GUIDE Plus+.
Action Bar:
The four coloured Action buttons change functionality
depending on the Area.
Highlight:
The current position of the "cursor" is visualized by change in
colour.
Information Box:
Short programme descriptions or help menus.
Information Panels:
Programme promotions or instructions.
Video Window
ormation
Panels
Menu Bar
Information
Box
Highlight
Loading...