JVC DLA-RS55 User Manual

Firmware Update Manual

(Ver.1.1)

for DLA-RS55

This manual describes how to update the firmware for the DLA-RS55 model.

**CAUTION** Do not unplug unit while firmware is being updated.

Please carry out the update in the order shown below:

１. Install Software

２. Projector LAN Settings

３. Projector Software Update

１. Install Software

First download the projector update software from the JVC website to your desktop on your computer.
This example uses the DLA-X70R

(1) Double-click the downloaded file on the desktop. This will start the installer.

(2) The dialog box shown on the right will appear.
Click the [Next] button.

(3) The dialog box shown on the right will appear.
Click the [Next] button.

(4) The dialog box shown on the right will appear.
Click the [Next] button
with the destination unchanged.

（5）The
Click the [Next] button.

（6) The dialog box shown on the right will appear.
Click the [Install] button.
Please wait until the installations is complete.

dialog box shown on the right will appear.

(7) The dialog box shown on the right will appear.
After installation is complete,
click the [Finish] button to exit the wizard.