JVC DLA-RS40 Product Sheet

DLA-RS40

3D Ready D-ILA Projector

The DLA-RS40 with a 50,000:1 Native Contrast Ratio Delivers

High-quality Pictures, Even in Brightly Lit Rooms.

Cinema-like Realism

• Native contrast ratio 50,000:1

• 1,300lm brightness

• New Clear Motion Drive enhances scenes
with rapid movement

Picture Quality Enhancement Features

• Six picture modes and three color spaces

• Screen Adjustment Mode

• Darkness and lightness correction

An Array of Convenient Features

• HDMI standard: Ver.1.4a, 3D Deep Color,
CEC compatible

• Unique automatic lens cover

• A variety of input and output terminals

• Flexible installation guaranteed

Exquisitely Natural Textures and Film-like Picture Quality —

JVC's New DLA-RS40 is True To Life.

❚ 1,300-lumen brightness and 50,000:1 native contrast ratio

The superlative combination of a new optical engine, original JVC D-ILA devices,
and a redesigned 220W ultra-high pressure mercury lamp allows the DLA-RS40
to realize a 50,000:1 native contrast ratio and a brightness of 1,300 lumens for
breathtaking video reproduction with ample contrast even in brightly lit rooms.

The advantage of native contrast

Conventional projector with dynamic iris

3,000:1
~5,000:1

50,000:1

Lamp beam

Iris off

The dynamic iris is opened for bright
scenes to make peak values brighter while
at the same time, making black level
lighter than it should be.

Lamp beam

Iris on

The dynamic iris is closed for
dark scenes to make black level
appear darker while at the
same time, making peak values
darker.

DLA-RS40

50,000:1

The 0.7-inch full HD D-ILA device can
display peak whites and deep blacks on
the same field of a picture.
This provides extremely sharp contrast for
more vivid and natural colour reproduction.

White

Black

❚ Unique Screen Adjustment Mode

As the quality of projected images can vary slightly depending on the type of
screen used, the DLA-RS40 is equipped with JVC’s unique Screen Adjustment
Mode function that incorporates parameters, which enable users to select the
optimum setting
to match screen
characteristics for
more natural and
balanced color
reproduction.

Screen adjustment mode onScreen adjustment mode off

❚ External Dimensions

(Unit: mm)

◆ Top ◆ Bottom

❚ D-ILA image projection in 3D*

It is now possible to enjoy the excitement of 3D
stereoscopic images in the comfort of one’s living
room without using a special screen, as the
DLA-RS40 projector features 3D that can be viewed
with 3D Active Shutter glasses. Additionally, the
fast-response characteristics and picture quality offered by D-ILA technology
allow viewers to enjoy vivid and colorful 3D images with far less crosstalk or
image ghosting.

*Optional 3D Glasses (PK-AG1) and 3D Synchro Emitter (PK-EM1) are required for viewing images in 3D.

Note: Keystone, anamorphic mode, and certain other functions cannot be used while projecting in 3D mode.

❚ New Clear Motion Drive improves pictures
with rapid movement

As an original manufacturer of high-speed drive technology, JVC has
further enhanced its detection interpolation technology through
high-precision interpolation algorithms to develop a new Clear Motion Drive
that helps to smooth movement in the picture. By reducing blur that can
be generated in high-speed scenes such as sports events, etc., the new
Clear Motion Drive makes the overall picture much smoother and clearer.
Additionally, as the amount of picture delay is very limited, these projectors are
also well suited for
playing video
games.

New Clear Motion Drive onNew Clear Motion Drive off

❚ Terminals on the Rear

❚ Optional Equipment

4725

29091

455

◆ Front ◆ Side (left)

80

11 128

❚ Projection Distance Chart

Notes about viewing 3D video content

• The optional 3D Synchro Emitter and 3D glasses are required to view 3D images from the DLA-RS40. 3D video software (3D media or out put of 3D broadcasts) and a 3D-compatible video player are also required. • Perception of 3D images will vary with individual viewers. • Stop viewing 3D images
immediately if any discomfort such headaches, dizziness, eye fatigue, etc. occur. • Viewing of 3D images by children under the age of five is not recommended. • Read the Safety Precautions in the User Manual carefully before viewing any 3D source.

•The projector is equipped with an ultra-high pressure mercury lamp, which may break, emitting a loud noise, when it is subjected to shock or after it has been used for some length of time. • Please note that, depending on how the projector is used, there can be considerable difference between individual lamps regarding how many hours they will operate before
requiring replacement. • An additional payment is required for installation of a new lamp, if necessary. • The projector lamp requires periodic replacement and is not covered by warranty. • Please be aware that, because the D-ILA device is manufactured using highly advanced technologies, 0.01% or fewer of the pixels may be non-performing (always on or off).

Design and specifications are subject to change without notice. All pictures on this brochure are s
granted herein are reserved.

Copyright © 2010, Victor Company of Japan, Limited (JVC). All Rights Reserved.

4545

58

*Projection distances are design specifications, so there is ±5% variation.

79

41 37

337

ø60

472

48

11755

❚ Specifications

179

24

PK-L2210U

User-replaceable Lamp

PK-AG1-B

3D Glasses

PK-EM1

3D Synchro Emitter