JVC AV 32260, AV 36230, AV 27260, AV 32230 User Manual

COLOR TELEVISION USER'S GUIDE

For models:

AV-36260 AV-36230 AV-32260 AV-32230 AV-27260

Illustration of AV-32260 and RM-C305

IMPORT ANT NOTE T O THE CUSTOMER

In the space below, enter the serial number of your television (located at the rear

of the television cabinet). Staple your sales receipt or invoice to the inside cover

of this guide. Keep this user's guide in a convenient place for

future reference. Keep the carton and original packaging for future use.

Serial Number

Model Number

LCT0951-001A-A

0201-TN-JII-JIM

IMPORTANT SAFETY PRECAUTIONS

WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT

EXPOSE THIS TV SET TO RAIN OR MOISTURE.

CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE

FOLLOWING RULES REGARDING THE USE OF THIS UNIT.

1. Operate only from the power source specified on the unit.

2. Avoid damaging the AC plug and power cord.

3. Avoid Improper installation and never position the unit where good ventilation is unattainable.

4. Do not allow objects or liquid into the cabinet openings.

5. In the event of trouble, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover.

Changes or modifications not approved by JVC could void the warranty. * When you don’t use this TV set for a long period of time, be sure to

disconnect both the power plug from the AC outlet and antenna for your safety.

* To prevent electric shock do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

CAUTION:To reduce the risk of electric shock.

Do not remove cover (or bac k).

No user serviceable parts inside.

Refer servicing to qualified service personnel.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

IMPORTANT SAFEGUARDS

CAUTION:

Please read and retain for your safety.

Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to assure your personal safety. But improper use can result in poten- tial electrical shock or fire hazards. In order not to defeat the safeguards incorporated in this TV set, observe the following basic rules for its installation, use and servicing. And also follow all warnings and instructions marked on your TV set.

INSTALLATION

1 Your TV set is equipped with a polarized AC line plug (one blade of the plug is wider

than the other).

This safety feature allows the plug to fit into the power outlet only one way. Should you be unable to insert the plug fully into the outlet, try reversing the plug. Should it still fail to fit, contact your electrician.

2 Operate the TV set only from a power source as indicated on the TV set or refer to the

operating instructions for this information. If you are not sure of the type of power supply to your home, consult your TV set dealer or local power company. For battery operation, refer to the operating instructions.

3 Overloaded AC outlets and extension cords are dangerous, and so are frayed power

cords and broken plugs. They may result in a shock or fire hazard. Call your service technician for replacement.

4 Do not allow anything to rest on or roll over the power cord, and do not place the TV

set where power cord is subject to traffic or abuse. This may result in a shock or fire hazard.

5 Do not use this TV set near water — for example, near a bathtub, washbowl, kitchen

sink, or laundry tub, in a wet basement, or near swimming pool, etc.

6 If an outside antenna is connected to the TV set, be sure the antenna system is

grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection requirements for the grounding electrode.

(POLARIZED-TYPE)

7 An outside antenna system should not be located in the vicinity of overhead power

lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

8 TV sets are provided with ventilation openings in the cabinet to allow heat generated

during operation to be released. Therefore: — Never block the bottom ventilation slots of a portable TV set by placing it on a

bed, sofa, rug, etc. — Never place a TV set in a “built-in” enclosure unless proper ventilation is provided. — Never cover the openings with a cloth or other material. — Never place the TV set near or over a radiator or heat register.

9 To avoid personal injury:

— Do not place a TV set on a sloping shelf unless properly secured. — Use only a cart or stand recommended by the TV set manufacturer. — Do not try to roll a cart with small casters across thresholds or deep pile carpets. — Wall or shelf mounting should follow the manufacturer’s instructions, and should

use a mounting kit approved by the manufacturer.

USE

10 Caution children about dr opping or pushing objects into the TV set through cabinet openings.

Some internal parts carry hazardous voltages and contact can result in a fire or electrical shock.

11 Unplug the TV set from the wall outlet before cleaning. Do not use liquid or an

aerosol cleaner.

12 Never add accessories to a TV set that has not been designed for this purpose.

Such additions may result in a hazard.

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

13 For added protection of the TVset during a lightning storm or when the TV set is to be left

unattended for an extended period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to product due to lightning storms or power line surges.

14 A TV set and cart combination should be moved with

care. Quick stops, excessive force, and uneven surfaces may cause the TV set and cart combination to overturn.

SERVICE

15 Unplug this TV set from the wall outlet and refer servicing to qualified service per-

sonnel under the following conditions: A. When the power cord or plug is damaged or frayed. B. If liquid has been spilled into the TV set. C. If the TV set has been exposed to rain or water. D. If the TV set does not operate normally by following the operating instructions.

Adjust only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage and will often require

extensive work by a qualified technician to restore the TV set to normal operation. E. If the TV set has been dropped or damaged in any way. F. When the TV set exhibits a distinct change in performance — this indicates a

need for service.

16 Do not attempt to service this TV set yourself as opening or removing covers may

expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

17 When replacement parts are required, have the service technician verify in writing

that the replacement parts he uses have the same safety characteristics as the original parts. Use of manufacturer’s specified replacement parts can prevent fire, shock, or other hazards.

18 Upon completion of any service or repairs to this TV set, please ask the service techni-

cian to perform the safety check described in the manufacturer’s service literature.

19 When a TV set reaches the end of its useful life, improper disposal could result in a pic-

ture tube implosion. Ask a qualified service technician to dispose of the TV set.

20 Note to CATV system installer.

This reminder is provided to call the CATV system installer’s attention to Ar ticle 82040 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

VIDEO

L MONO

AUDIO R

INPUT 2

POWER

DISPLAY

SLEEP TIMER

CHANNEL

VIDEO STATUS

SOURCE

FREEZE

PIP

SWAP

ON/MOVE

INPUT

100+

RETURN+

MUTING

V CHIP

PIP OFF

EXIT

8 0

VOL

REC STOP

PAUSE

PLAY FFREW

CATV

DVD

VCR

VCR CHANNEL

TV/VCR

VCR/DVD

POWER

PREV NEXT

OPEN/CLOSE STILL/PAUSE

RM-C305

HYPER SURROUND

RM-C305

T wo AA

Batteries

AV-32260

1 Television

1 Remote

Control

Thank you for your purchase of a JVC Color Television. Before you begin setting up your new television, please check to make sure you have all of the following items. In addition to this guide, your television box should include:

Once you have unpacked your television, the next step is to connect it to your antenna, cable or satellite system and to connect the audio/video devices you want to use with your television. To make these connections you will use plugs like the ones illustrated below.

A/V Input Plug

RF Connectors

Used to connect a coaxial cable from an external antenna or Cable TV system.

A matching TV stand is also available (sold separately).

Used to make video connections with some VCRs, DVDs, Camcorders, etc.

Used to connect audio/video devices like VCRs, DVD players, stereo amplifiers, game consoles, etc.

S-Video Plug

We recommend that before you start using your new television, you read this entire User’s Guide so you can learn about your new television’s many great features.But if you’re anxious to start using your television right away, a quick setup guide follows on the next three pages.

Unpacking Your Television

Used to connect JVC AV Compu Link capable components for an automated home theater .

AV Compu Link Cable

Note:Your television and/or remote control may differ from the examples illustrated here.

Slide the cover on the back of the remote down towards the bottom of the remote control. Insert two batteries carefully noting the “+” and “–” markings, placing the “–” end in the unit first. Slide the cover back into place.

Getting Started

Step One - The Remote Control

The remote control is the key to operating your television's many great features. Before you can operate your remote control, you first need to install the batteries (included).

Basic Operation

Turn the television on and off by pressing the POWER button at the top right corner of the remote.

The four key feature buttons at the center of the remote can be used for basic operation of the television. The top and bottom buttons will scan forward and back through the available channels. The right and left buttons will turn the volume up or down. These buttons are also marked with four arrows and are also used with JVC's onscreen menu system. You will need to use these buttons later in the Quick Setup Section.

The next step is to connect your television to an antenna or cable.

Remote Power

Button

Remote Key Feature Buttons



Proceed to Step Two

These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away. This information includes basic instructions on operating your remote control, making a simple cable/antenna and optional VCR connection and, finally, information on programming your television's Auto Tuner.

If you have questions, or for more detailed information on any of these steps, please consult other sections of this guide.

Quick Setup 1

POWER

MUTING

VOL

V CHIP

EXIT

PIP OFF

S VIDEOVIDEO

INPUT

L MONO

INPUT

AUDIO

OVER

75Ω

(VHF / UHF)

COMPONENT VIDEO IN

AV COMPULINK EX

AUDIO OUT

WALL

CABLE or ANTENNA

OUT

Cable/RF connector

S VIDEOVIDEO

INPUT 1

L MONO

INPUT 4

AUDIO

OVER

75Ω

(VHF / UHF)

COMPONENT VIDEO IN

AV COMPULINK EX

AUDIO OUT

VCR

AV Cables/Plugs

Step Two - Making Basic Connections

Next you will need to connect your television to an antenna or cable system. The most basic antenna/cable connection is shown below. For more detailed connections, such as ones where a cable box is required, see pages 11 to 13.

You may also wish to connect a VCR at this point. A basic VCR connection is shown below. For detailed instructions on connecting other components or a home theater system, see pages 14 to 16.

Note: A VCR is not required to operate your television.

1) Connect the yellow video cable out from the VCR’s Video Output, in to the TV’s Video Input jack, OR connect an S-Video cable from the VCR’s S-Video Output, to the TV’s S-Video Input.

2) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left Audio Input jack.

3) Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right Audio Input jack.

Finally, once you have finished your connections, plug the power cord into the nearest power outlet and turn on the television.

1) Connect an RF cable out from the wall outlet in to the RF Input on the back of the TV.



Proceed to Step Three

Quick Setup 2

Press the

❷

buttons to move to AUTO TUNER SETUP

Press the

➛❿

buttons to begin AUTO TUNER SETUP

➛❿

To choose CABLE (if you are connected to a cable system) or AIR (if you use an antenna)

❷

To move to START

➛❿

To start Auto Tuner Setup

The Auto Tuner will now memorize all of the clear, active channels your television can receive. This will take one or two minutes.

NOW

PROGRAMMING!

TUNER MODE : CABLE AIR

START

Step Three - The Plug In Menu

When you turn your television on for the first time the Plug In Menu will appear. This menu sets some of the basic settings for your television. Acomplete description of the Plug In Menu can be found starting on page 22. We recommend you complete the Plug In Menu items before you start using your television. But to begin watching your television right away you only need to run the Auto Tuner Setup. This lets your television learn the channels it is able to receive. To run the Auto Tuner Setup follow the steps below.

The Auto Tuner is finished when the message PROGRAMMING OVER! appears onscreen. Your Quick Setup is now complete. You can now begin watching your television, or you can continue on

in this guide for more information on connecting audio/video devices, programming your remote control, or using the JVC onscreen menu system to customize your television viewing experience.

PLUG IN MENU

LANGUAGE ENG FRE SPA AUTO TUNER SETUP SET CLOCK

FINISH

SELECT BY OPERATE BY

EXIT BY

The Quick Setup is complete

Quick Setup 3

STOP

Table of Contents

Quick Setup Guide ....7

CONNECTIONS

Cable and VCR Connections .......11

Connecting to a DVD Player .......14

Connecting to an External Amplifier . . . 15

Connecting to a Camcorder .......15

Connecting to JVC AV Compu Link . . . 16

GETTING STARTED

Remote Control

Remote Control Basics.....17

Changing the Batteries.....17

Remote Programming ..........18

CATV and Satellite Codes.........18

VCR Codes ................19

DVD Codes ................20

MENU FUNCTIONS

Using the Guide .............21

Plug In Menu

Introduction..........22

Language...........22

Auto Tuner Setup .......22

Auto Clock Set .........23

Manual Clock Set .......24

Finish..............24

Channel Summary............25

V-Chip...................26

Set Lock Code.........33

Picture Settings

Tint ...............34

Color ..............34

Picture .........34

Bright .............34

Detail .............34

Noise Muting .........35

Set Video Status ........35

Sound Settings

Bass ..............36

Treble .............36

Balance ............36

MTS (Multi-channel Sound)..36

General Items

On/Off Timer ..........37

TV Speaker ..........38

Closed Caption ........39

BUTTON FUNCTIONS

Menu...................40

Exit and PIP Off..............40

Display ..................40

Video Status ...............41

Sleep Timer ................41

Hyper Surround .............41

Muting ..................41

100+ ...................42

Return+. . ................42

Input...................42

VCR Buttons ...............43

DVD Buttons ...............43

TV/CATV Switch .............43

VCR/DVD Switch .............43

PIP (Picture-In-Picture)

Introduction..........44

On/Move............44

Freeze.............45

Swap..............45

Channel +/-..........45

Source.............45

APPENDICES

Troubleshooting .............46

Warranty .................47

Authorized Service Centers .......49

Search Codes...............50

Specifications...............51

1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the two-way splitter.

2) Connect an RF cable from the one of the RF Outputs on the splitter, in to the RF Input on the back of the VCR.

3) Connect an RF cable from the other the RF Output on the splitter, in to the RF Input on the back of the TV.

4) Connect the yellow video cable out from the VCR’s Video Output, in to the TV’s Video Input jack, OR connect an S-Video cable from the VCR’s S-Video output, to the TV’s S-Video input.

5) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left Audio Input Jack.

6) Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right Audio Input jack.

• If your VCR is a mono sound unit, it will have only one Audio Out jack. Connect it to the TV’s Left Audio Input.

• Please consult your VCR’s owner’s manual for more information on its operation.

Connections

There are three basic types of antenna or cable connections:

• If you have an antenna or have a cable system that does not require you use a cable box to select channels, please refer to Diagram #1.

• If you have a cable system that requires the use of a cable box to access all the channels, please refer to Diagram #2. If you cannot operate your Picture-In-Picture function using Diagram #2, try the connection shown in Diagram #3. It is possible your cable box allows the signal of only one channel at a time to be sent to your television.

• If you have a cable system that requires the use of a cable box to access certain premium channels, but not “basic” cable channels, please refer to Diagram #3.

• For your convenience, connection to a VCR is also shown in the following diagrams. A VCR is not necessary for operation of the television or Picture-In-Picture (PIP) function. You may omit the VCR from your connections if you wish.

• For instructions on connecting a VCR only, please see the Quick Setup on page 8.

• For information on using PIP, please see page 44.

• The PIP feature is available on models AV-36260, AV-32260 and AV-27260 only.

Cable and VCR Connections

Diagram #1

AUDIO

S VIDEOVIDEO

L MONO

OVER

INPUT

COMPONENT VIDEO IN

75Ω

(VHF / UHF)

AUDIO OUT

AV COMPULINK EX

WALL

CABLE or ANTENNA

OUT

TWO-WAY SPLITTER

VCR

Connections

1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the cable box.

2) Connect an RF cable from the RF Output of the cable box, in to the RF Input on the back of the VCR.

3) Connect an RF cable from the RF Output of the VCR, in to the RF Input on the back of the TV.

4) Connect the yellow video cable out from the VCR’s Video Output, in to the TV’s Video Input jack, OR connect an S-Video cable from the VCR’s S-Video output, to the TV’s S-Video input.

5) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left Audio Input Jack.

6) Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right Audio Input jack.

• Please see page 44 for information on using the PIP feature with a Cable Box.

• If your VCR is a mono sound unit, it will have only one Audio Out jack. Connect it to the TV’s Left Audio Input.

• Please consult your VCR’s owner’s manual for more information on its operation.

Cable and VCR Connections - Continued

Diagram #2

WALL

CABLE or ANTENNA

OUT

VCR

AUDIO

S VIDEOVIDEO

L MONO

OVER

INPUT

COMPONENT

VIDEO IN

75Ω (VHF / UHF)

AUDIO OUT

AV COMPULINK EX

Connections

The connection diagrams are intended to show some basic general connections. Some cable companies may require special connections to properly use your television or 2-tuner PIP function. If you follow these diagrams and either the television or PIP does not work properly, contact your local cable operator for more connection information. Please see page 44 for more information on the PIP feature.

Cable and VCR Connections - Continued

1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the two-way splitter.

2) Connect an RF cable from the one of the RF Outputs on the splitter, in to the cable box RF Input.

3) Connect an RF cable from the Cable Box Output, in to the VCR RF Input.

4) Connect an RF cable from the other the RF Output on the splitter, in to the RF Input on the back of the TV.

5) Connect the yellow video cable out from the VCR’s Video Output, in to the TV’s Video Input jack, OR connect an S-Video cable from the VCR’s S-Video output, to the TV’s S-Video input.

6) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left Audio Input jack.

7) Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right Audio Input jack.

• Please see page 44 for information on using the PIP feature with a Cable Box.

• If your VCR is a mono sound unit, it will have only one Audio Out jack. Connect it to the TV’s Left Audio Input.

• Please consult your VCR’s owner’s manual for more information on its operation.

Diagram #3

WALL

CABLE or ANTENNA

OUT

AUDIO

S VIDEOVIDEO

L MONO

OVER

INPUT

INPUT 4

COMPONENT VIDEO IN

75Ω (VHF / UHF)

AUDIO OUT

AV COMPULINK EX

TWO-WAY SPLITTER

VCR

Connections

Connecting to a DVD player

1) Connect Green cable out from DVD player “Y” Component Output, in to TV “Y” Component Input.

2) Connect Blue cable out from DVD player “P

B” Component Output, in to TV “PB” Component Input.

3) Connect Red cable out from DVD Player “P

R” Component Output, in to TV “PR” Component Input.

4) Connect White Audio cable out from DVDLeft Audio Output, in to TV Left Audio Input 2.

5) Connect Red Audio cable out from DVDRight Audio Output, in to TV Right Audio Input 2.

• Green, blue and red are the most common colors for DVD cables. Some models may vary colors, please consult the user’s manual for your DVD Player for more information.

• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of connections (DVD or Audio Output) before starting the other to avoid accidentally switching the cables.

• See page 20 for instructions on programming your remote control to operate the basic functions of your DVD player.

• NOTE: Progressive DVD Players (players with an output scan of 31.5 KHz) will not work properly with this television.

DVD Player

AUDIO OUT

R L

S VIDEOVIDEO

AUDIO R

L MONO

OVER

INPUT

COMPONENT VIDEO IN

75Ω

(VHF / UHF)

AUDIO OUT

AV COMPULINK EX

Y P

Green

Blue

Red

Connections

1) Connect the yellow video cable out from the Camcorder ’s Video Output, in to the TV’s Video Input jack.

2) Connect the white audio cable out from the Camcorder’s Left Audio Output, in to the TV’s Left Audio Input jack.

3) Connect the red audio cable out from the Camcorder’s Right Audio Output, in to the TV’s Right Audio Input jack.

• If your Camcorder is a mono sound model it will have only one audio jack. Connect it to the TV’s Left Audio jack.

• The front Input jacks (Input 3) of models AV-36260 and AV-36230 are located under the front panel door.

Connecting to a Camcorder

You may connect a camcorder to your television by using the front input jacks (Input 3).You may also connect a game console or other equipment using these jacks. Camcorders and game consoles may also be connected to the television’s rear input jacks.

Connecting to an External Amplifier

1) Connect the white audio cable from the TV’s Left Audio Output jack to the Amplifier’s Left Audio Input jack.

2) Connect the red audio cable from the TV’s Right Audio Output jack to the Amplifier’s Right Audio Input jack.

• Also see “TV Speaker” on page 38 for more information on using external speakers.

Illustration of AV-32260

AUDIO

S VIDEOVIDEO

L MONO

OVER

INPUT 1

INPUT 4

COMPONENT VIDEO IN

75Ω

(VHF / UHF)

AUDIO OUT

AV COMPULINK EX

VOLUME

INPUT 3

VIDEO

MONO

AUDIO

CHANNEL

OPERATE

POWER

Connections

To Connect: Plug one end of the AV Compu Link cable into the AV Compu Link EX input on your VCR,

DVD, or other Compu Link device. Plug the other end of the AV Compu Link EX cable into the AV Compu Link input at the rear of the television.

Connecting to JVC AV Compu Link

JVC’s AV Compu Link EX feature makes playing video tapes or DVDs totally automatic. Simply insert a pre-recorded tape* into your AV Compu Link EX compatible JVC-brand VCR or DVD into your JVC DVD player and the device will automatically turn on and begin playback. At the same time, using the AV Compu Link, the VCR or DVD player sends a signal to the television telling it to turn on and switch to the proper video input.

• The AV Compu Link cable may be included with the JVC AV Compu Link accessory you wish to connect. If it is not, contact an authorized JVC Service Center for part # EWP 805-012.

• AV Compu Link can only be used with JVC-brand products.

NOTES:

* In order for the VCR playback to begin automatically, the recording tab must be removed from the

VHS tape. If the tab is in place, automatic switching will occur when you push the VCR’s P

LA Y button.

• The AV Compu Link cable has a male 3.5 mm (mono) plug on each end.

• If your JVC-brand VCR has “A Code/B Code Remote Control Switching” (see your VCR’s user’s guide), using VCRA Code will switch the TV to input 1.

• To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see the HiFi’s connection instructions in its user’s guide for detailed connection information.

• AV COMPU LINK EX is compatible with the following receivers: RX-664V, RX-665V, RX-668VBK, RX-774V, RX-778VBK, RX-884V, RX-888VBK, RX-1024V, RX-1028VBK, and later receiver models.

VCR or DVD player

S VIDEOVIDEO

AUDIO

L MONO

OVER

INPUT 1

INPUT 4

COMPONENT

VIDEO IN

75Ω

(VHF / UHF)

AUDIO OUT

AV COMPULINK EX

AV Compu Link EX Swap

+ 36 hidden pages