JVC AV-27SF35, AV-32SF35, AV-27CF35, AV-32CF35, AV-27WF35 User Manual

...

VIDEO

STATUS

100

DISPLAY

GAME

MUTING

VOL

CHANNEL

REW FF

REC

VCRCONTROL

RM-C203G

POWER

RETURN

SLEEP INPUT

VOL

POWER

PLAY

STOP

PAUSE

Color Television Users Guide

For Models:

AV-27SF35 AV-32SF35 AV-27CF35

AV-32CF35 AV-27WF35 AV-32WF35

C.C.

EXIT

TV VCR

Illustration of AV-32CF35 and RM-C203G

Important Note:

In the spaces below, enter the model and serial number of your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user's guide in a convenient place for future reference. Keep the carton and original packaging for future use.

Model Number:

Serial Number:

LCT1563-001A-A

0204KGI-II-IM

Important Safety Precautions

CAUTION

RISK OF ELECTRICAL SHOCK

DO NOT OPEN

CAUTION: To reduce the risk of electric shock. Do not remove cover

(or back). No user serviceable parts inside. Refer servicing to qualiﬁ ed service personnel.

The lightning ﬂ ash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufﬁ cient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS TV SET TO

RAIN OR MOISTURE.

CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES

REGARDING THE USE OF THIS UNIT.

1. Operate only from the power source speciﬁ ed on the unit.

2. Avoid damaging the AC plug and power cord.

3. Avoid Improper installation and never position the unit where good ventilation is

4. Do not allow objects or liquid into the cabinet openings.

5. In the event of trouble, unplug the unit and call a service technician. Do not attempt

Changes or modiﬁ cations not approved by JVC could void the warranty.

• When you don’t use this TV set for a long period of time, be sure to disconnect both

• To prevent electric shock do not use this polarized plug with an extension cord,

unattainable.

to repair it yourself or remove the rear cover.

the power plug from the AC outlet and antenna for your safety.

receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

IMPORTANT RECYCLING INFORMATION

This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information, please contact your local authorities, or the Electronic Industries Alliance: http://www.eiae.org

CAUTION ON REPLACABLE LITHIUM BATTERY

The battery used in this device may present a ﬁ re or chemical burn hazard if mistreated. Do not recharge, disassemble, heat above 100ºC or incinerate.

Replace battery with CR2032 Panasonic (Matsushita Electric) or Maxell is recommended.

Danger of explosion or risk of ﬁ re if the battery is incorrectly replaced.

• Dispose of used battery promptly.

• Keep away from children.

• Do not disassemble and do not dispose of in ﬁ re.

• As an “ENERGY STAR®” partner, JVC has determined that this product or product model meets the “ENERGY

” guidelines for energy efﬁ ciency.

STAR

Important Safeguards

CAUTION:

Please read and retain for your safety.

Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to assure your personal safety. But improper use can result in potential electrical shock or ﬁ re hazards. In order not to defeat the safeguards incorporated in this TV set, observe the following basic rules for its

installation, use and servicing. Also follow all warnings and instructions marked on your TV set.

INSTALLATION

1 Your TV set is equipped with a polarized AC line plug (one blade of the

plug is wider than the other). This safety feature allows the plug to ﬁ t into the power outlet only one way. Should you be unable to insert the plug fully into the outlet, try reversing the plug. Should it still fail to ﬁ t, contact your electrician.

(POLARIZED-TYPE)

2 Operate the TV set only from a power source as indicated on the TV set or refer to the operating instructions

for this information. If you are not sure of the type of power supply to your home, consult your TV set dealer or local power company. For battery operation, refer to the operating instructions.

3 Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords and broken

plugs. They may result in a shock or ﬁ re hazard. Call your service technician for replacement.

4 Do not allow anything to rest on or roll over the power cord, and do not place the TV set where power cord is

subject to trafﬁ c or abuse. This may result in a shock or ﬁ re hazard.

5 Do not use this TV set near water – for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a

wet basement, or near swimming pool, etc.

6 If an outside antenna is connected to the TV set, be sure the antenna system is grounded so as to provide

some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection requirements for the grounding electrode.

7 An outside antenna system

GROUND CLAMP

ELECTRICAL SERVICE EQUIPMENT

NEC - NATIONAL ELECTRIC CODE

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ARTICLE 250, PART H)

should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE

8 TV sets are provided with ventilation openings in the cabinet to allow heat generated during operation to be

released.

Therefore:

— Never block the bottom ventilation slots of a portable TV set by placing it on a bed, sofa, rug, etc. — Never place a TV set in a “built-in” enclosure unless proper ventilation is provided. — Never cover the openings with a cloth or other material. — Never place the TV set near or over a radiator or heat register.

9 To avoid personal injury:

— Do not place a TV set on a sloping shelf unless properly secured. — Use only a cart or stand recommended by the TV set manufacturer. — Do not try to roll a car t with small casters across thresholds or deep pile carpets. — Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit

approved by the manufacturer.

Use

10 Caution children about dropping or pushing objects into the TV set through cabinet openings. Some

internal parts carry hazardous voltages and contact can result in a ﬁ re or electrical shock.

11 Unplug the TV set from the wall outlet before cleaning. Do not use liquid or an aerosol cleaner.

12 Never add accessories to a TV set that has not been designed for this purpose. Such additions may result

in a hazard.

PORTABLE CART WARNING (Symbol provided by RETAC)

MADEIN

LITHIUM

TERY

INSIDE

SEE

MANUAL

13 For added protection of the TV set during a lightning storm or when the TV set is to be left unattended for

an extended period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to product due to lightning storms or power line surges.

14 A TV set and cart combination should be moved with care. Quick stops, excessive force, and uneven

surfaces may cause the TV set and cart combination to overturn.

Service

15 Unplug this TV set from the wall outlet and refer servicing to qualified service personnel under the

following conditions: A. When the power cord or plug is damaged or frayed. B. If liquid has been spilled into the TV set. C. If the TV set has been exposed to rain or water. D. If the TV set does not operate normally by following the operating instructions. Adjust only those

controls that are covered in the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV set to normal operation.

E. If the TV set has been dropped or damaged in any way. F. When the TV set exhibits a distinct change in performance — this indicates a need for service.

16 Do not attempt to service this TV set yourself as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

17 When replacement parts are required, have the service technician verify in writing that the replacement

parts he uses have the same safety characteristics as the original parts. Use of manufacturer’s specified replacement parts can prevent fire, shock, or other hazards.

18 Upon completion of any service or repairs to this TV set, please ask the service technician to perform the

safety check described in the manufacturer’s service literature.

19 When a TV set reaches the end of its useful life, improper disposal could result in a picture tube

implosion. Ask a qualified service technician to dispose of the TV set.

20 Note to CATV system installer.

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

How to use the remote.

Before using, insert the lithium battery – CR2032 – correctly, with the plus (+) side up into the battery compartment. To open it, press the release tab and carefully pull the compartment out. The remote control can operate most of your TV’s functions, as well as basic functions of JVC VCRs.

* Point the remote towards the remote sensor on the target

component. The maximum operating distance is about 8 meters.

* To operate a JVC VCR, use any of the following buttons:

VCR POWER, TV/VCR INPUT, VCR CH+/-, PLAY, REWIND, FAST-FORWARD, STOP, RECORD and PAUSE.

NOTE: If the remote does not work properly, remove the battery,

wait for a few seconds, replace the battery and try again.

Table of Contents

Quick Setup . . . . . . . . . . . 7

Unpacking your TV . . . . . . . . . . . . 7

TV Models . . . . . . . . . . . . . . . . 8

TV Remote Control . . . . . . . . . . . 9

Getting Started . . . . . . . . . . . . . 10

The Remote Control . . . . . . . . . . 10

Connecting Your Devices . . . . . . . 11

Interactive Plug In Menu . . . . . . . . 15

Onscreen Menus . . . . . . . . 18

Using the Guide . . . . . . . . . . . . . 18

Onscreen Menu System . . . . . . . . . 19

Initial Setup . . . . . . . . . . 20

Auto Tuner Setup . . . . . . . . . . . . 20

Channel Summary . . . . . . . . . . . . 20

V-Chip . . . . . . . . . . . . . . . . . . 21

Set Lock Code . . . . . . . . . . . . . 27

Language . . . . . . . . . . . . . . . . 28

Closed Caption . . . . . . . . . . . . . 28

Front Panel Lock . . . . . . . . . . . . 29

Auto Shut Off . . . . . . . . . . . . . . 29

XDS ID . . . . . . . . . . . . . . . . . 29

Video Input Label . . . . . . . . . 30

Picture Adjust . . . . . . . . . 31

Picture Settings . . . . . . . . . . . . . 31

Adjust Picture Settings . . . . . . . . . 31

Color Temperature . . . . . . . . . . . . 32

Noise Muting . . . . . . . . . . . . . . 32

VSM . . . . . . . . . . . . . . . . . 32

Button Functions . . . . . . . 37

Power . . . . . . . . . . . . . . . . . . 37

Number Buttons . . . . . . . . . . . . . 37

100+ Button . . . . . . . . . . . . . . . 37

Channel +/– . . . . . . . . . . . . . . . 37

Volume +/– . . . . . . . . . . . . . . . 37

Muting . . . . . . . . . . . . . . . . . . 37

Menu . . . . . . . . . . . . . . . . . . 37

Exit . . . . . . . . . . . . . . . . . . . 37

Return + . . . . . . . . . . . . . . . . . 38

Input . . . . . . . . . . . . . . . . . . . 38

Display . . . . . . . . . . . . . . . . . 39

Sleep . . . . . . . . . . . . . . . . . 39

C.C. . . . . . . . . . . . . . . . . . . . 40

Video Status . . . . . . . . . . . . . . . 40

Game . . . . . . . . . . . . . . . . 40

VCR Buttons . . . . . . . . . . . . . . . 40

Appendices . . . . . . . . . . 41

Troubleshooting . . . . . . . . . . . . . 41

Warranty . . . . . . . . . . . . . . . . . 42

Authorized Service Centers . . . . . . . 44

Specifications . . . . . . . . . . . . . . 45

Notes . . . . . . . . . . . . . . . . . 46

Sound Adjust . . . . . . . . . 33

Sound Settings . . . . . . . . . . . . . 33

Adjust Sound Settings . . . . . . . . . 33

MTS (Multi-channel Sound) . . . . . . . 33

Clock Timers . . . . . . . . . . 34

Set Clock . . . . . . . . . . . . . . . . 34

On/Off Timer . . . . . . . . . . . . . . . 35

World Clock . . . . . . . . . . . . . . 36

Quick Setup Unpacking Your TV

CR2032

Thank you for your purchase of a JVC Color Television. Before you begin setting up your new television, please check to make sure you have all of the following items. In addition to this guide, your television box should include:

1 Television

1 Remote Control

VIDEO

POWER

STATUS

100

RETURN

DISPLAY

GAME

SLEEP INPUT

C.C.

MUTING

VOL VOL

EXIT

CHANNEL

TV VCR

POWER

PLAY

REW FF

REC

PAUSE

STOP

VCRCONTROL

RM-C203G

CR2032

Note: Your television and/or remote control may differ from the examples illustrated here.

Once you have unpacked your television, the next step is to connect it to your antenna/ cable or satellite system and to connect the audio/video devices you want to use with your television. To make these connections you will use plugs like the ones illustrated below.

Coaxial Cables

Component Cables

Composite Cables

Audio Cables

Used to connect an external antenna or cable TV system to your TV.

S-Video Cable

Used to connect audio/video devices like VCRs, DVD players, stereo amplifiers, game consoles, etc.

Used to make video connections with S-Video VCRs, Camcorders and DVD players.

We recommend that before you start using your new television, you read your entire User’s Guide so you can learn about your new television’s many great features. If you’re anxious to start using your television right away, a quick setup guide follows on the next few pages.

Quick Setup TV Models

NOTE: Before you connect your television to another device, please refer to the proper

diagrams for your specific TV and remote. These will help assist you in understanding how to connect your television to another device, as well as use the remote to set up your television.

Rear Panel Diagrams

MODELS: AV-27SF35 AV-27CF35

R L MONO

AV-27WF35 AV-32SF35 AV-32CF35 AV-32WF35

AUDIO OUT

Front Panel Diagrams

AUDIO

VIDEO

INPUT 3

LMONO

OVER

AUDIO R

S VIDEOVIDEO

INPUT 1

INPUT 2

COMPONENT

VIDEO

Y/Video

CHANNEL

OPERATE

75Ω

(VHF / UHF)

VOLUME

MODELS: AV-27SF35, AV-27CF35, AV-27WF35, AV-32SF35, AV-32CF35 and AV-32WF35

Quick Setup TV Remote Control

VIDEO

STATUS

100

DISPLAY

GAME

SLEEP INPUT

MUTING

VOL

CHANNEL

POWER

PLAY

REW FF

STOP

REC

VCR CONTROL

RM-C203G

POWER

RETURN

VOL

PAUSE

C.C.

EXIT

TV VCR

RM-C203G

MODELS: AV-27SF35 AV-27CF35 AV-27WF35 AV-32SF35 AV-32CF35 AV-32WF35

• For information on remote control buttons, see pages 37 - 40.

Quick Setup Getting Started

MUTING

C.C.

EXIT

VOL

MADEIN

LITHIUMBA

TERY

INSIDE

SEE

MANUAL

Getting Started

These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away.

If you have questions, or for more detailed information on any of these steps, please consult other sections of this manual.

Step 1 – The Remote Control

Before you can operate your remote control, you first need to install the batteries (included).

With your thumb, push the latch on the back of the remote control inward, and while holding it there, pull the battery cover out with your index finger. Insert the battery (included) carefully noting the “+” and “–” markings. Push the cover back into place.

Key Feature Buttons

The four key feature buttons at the center of the remote can be used for basic operation of the television. The top and bottom buttons will scan forward and back through the available channels. To move rapidly through the channels using JVC’s Hyperscan feature, press and hold CH+ or CH –. The channels will zip by at a rate of five channels per second. The right and left buttons will turn the volume up or down. These buttons are also marked with four arrows and are used with JVC’s onscreen menu system. To use the onscreen menus, press the M

ENU button.

Note: Illustration of remote control RM-C203G

Quick Setup Connections

Basic Operation

Turn the television on and off by pressing the POWER button at the top right corner of the remote.

Step 2 – Connecting Your Devices

Please follow the flow chart below to determine which connection setup is right for you. Then, refer to the appropriate diagrams to connect your television to other devices that you may have. After you are finished connecting your devices, plug the power cord into the nearest power outlet and turn on the TV.

A VCR is not necessary for operation of the television. If you follow these diagrams and the television does not work properly, contact your local cable operator.

• To connect a DVD player, see Diagram #3. A DVD player is optional.

• If you have a satellite television system, please refer to the satellite TV manual.

Do you use a Cable TV Box?

POWER

Yes

Do you have a VCR? Do you have a VCR?

Yes No Yes No

Diagram #2

Diagram #1 Diagram #3 Diagram #1

Quick Setup Connections

Diagram #1

Illustration of AV-32CF35

TV Rear Panel

AUDIO

RLMONO

AUDIO OUT

S VIDEOVIDEO

OVER

INPUT 1

INPUT 2

COMPONENT

VIDEO

Y/Video

75Ω

(VHF / UHF)

Coaxial Cable

Note:

• If you do not have a cable box, connect the cable wire from the wall outlet into the back of the TV.

Diagram #2

Illustration of AV-32CF35

TV Rear Panel

AUDIO

RLMONO

AUDIO OUT

S VIDEOVIDEO

OVER

INPUT 1

INPUT 2

COMPONENT

VIDEO

Y/Video

75Ω

(VHF / UHF)

Cable or Antenna

OUT IN

Cable Box

Cable or Antenna

Output

Coaxial Cable

OUT

RLV

OUT

VCR

OUT IN

Cable Box

Notes:

• If your VCR is a mono sound unit, it will have only one audio out jack. Connect it to the TV’s LEFT AUDIO INPUT.

• Use the S-Video connection if possible for superior picture quality.

• Your VCR must be turned on to view premium cable channels.

Quick Setup Connections

Notes:

• Green, blue and red are the most common colors for DVD cables. Some models may vary colors. Please consult the user’s manual for your DVD player for more information.

• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of connections (DVD or audio output) before starting the other to avoid accidentally switching the cables.

• If you use INPUT 2 (Component-In), for a DVD connection, you must select "V2-COMPONENT" by pressing the I

• Progressive DVD players (players with an output scan of 31.5 KHz) will not work properly with this television. Set your DVD player’s output to “interlaced”, or non-progressive mode.

Diagram #3

Illustration of AV-32CF35

DVD Player (OPTIONAL)

Green

Blue

Red

OUT

AUDIO OUT

NPUT button, for proper display of the DVD signal.

Cable or Antenna

VCR

RLV

OUT

Output

Coaxial Cable

TV Rear Panel

75Ω

(VHF/ UHF)

AUDIO

R L MONO

AUDIO OUT

S VIDEOVIDEO

OVER

INPUT 1

INPUT 2

COMPONENT

VIDEO

Y/Video

Quick Setup Connections

Connecting to a Camcorder

You may connect a camcorder, game console or other equipment to your television by using the front input jacks (Input 3) located under the front panel door. To access, pull on the door to open it. You can also connect these using the television’s rear input jacks, using the same instructions.

Illustration of AV-32CF35

INPUT 3

AUDIO R

L MONO

VIDEO

CHANNEL

OPERATE

1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on

the front of the TV.

2) Connect a white composite cable from the camcorder LEFT AUDIO OUT, into the

LEFT AUDIO IN on the front of the TV.

3) Connect a red composite cable from the camcorder RIGHT AUDIO OUT, into the

RIGHT AUDIO IN on the front of the TV.

Note:

• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the LEFT AUDIO IN.

VOLUME

Camcorder

Connecting to an External Amplifier

Illustration of AV-32CF35

SpeakerSpeaker

Amplifier

AUDIO OUT

TV Rear Panel

1) Connect a white composite cable from the LEFT AUDIO OUTPUT on the back of the TV to the LEFT AUDIO INPUT on the amplifier.

2) Connect a red composite cable from the RIGHT AUDIO OUTPUT on the back of the TV to the RIGHT AUDIO INPUT on the amplifier.

Notes:

• Refer to your amplifier’s manual for more information.

• You can use AUDIO OUTPUT for your home theater system.

+ 31 hidden pages

JVC AV-27SF35, AV-32SF35, AV-27CF35, AV-32CF35, AV-27WF35 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual