JVC AV-21C15, AV-21F25, AV-14F15, AV-21E15, AV-21F15 User Manual

...

COLOUR TELEVISION

MODEL WITH THE TELETEXT FUNCTION
AV-21F25
MODEL WITHOUT THE TELETEXT FUNCTION
AV-14A15 AV-14F15 AV-21C15 AV-21E15 AV-21F15 AV-21Q14

Contents

Knowing your TV’s features Remote control buttons and basic functions.3 TV buttons and functions Setting up your TV Basic setting for picture Advanced setting for picture Original features for picture Basic setting for sound Advanced setting for sound Favorite channel and video setting Customized setting TV channel presetting Additional preparation Troubleshooting Specifications
........................................
..........................................
................................
..........................
..............................
.................................
.........................
...........................
................................
........................
.............
.....................................
.................................
.................................
Back cover
10 10 11 12 13 15 15
2
5 6 8 9 9
INSTRUCTIONS
GGT0075-001B-H
Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual throughly before you begin.

Safety Instructions

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING
RULES REGARDING THE USE OF THIS TV.
1 Operate only from the power source indicated on the rear of the TV. 2 Avoid damaging the power cord and mains plug. When unplugging the TV, grasp the
mains plug. Do not pull on the power cord.
3 Never block or cover the cabinet ventilation
openings. Never install the TV where good ventilation is unattainable. When installing this TV, leave spaces for ventilation around the TV more than the minimum distances as shown in the diagram.
4 Do not allow objects or liquid into the cabinet
10 cm
openings.
5 In the event of a fault, unplug the unit and call a JVC service technician.
Do not attempt to repair it yourself or remove the rear cover.
6 The surface of the TV screen is easily damaged. Be very careful with it when handling
the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it.
7 If you are not going to use this TV for a long period of time, be sure to disconnect the
AC plug from the AC socket.
8 The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the apparatus.
15 cm
15 cm10 cm

Knowing your TV’s features

Main features
Function Description
*Teletext You can view teletext programmes which are broadcasted by some TV channels.
Favorite CH (Channel) You can register up to four favorite channels for quick re-call with one-press. AI Volume TV adjusts automatically the volume to the same level for all TV channels to
VNR You can reduce the picture noise when viewing noisy TV programmes or video
White balance You can choose one of three tones of white to match to the video source such
Child lock To prevent accidental operation by your children, you can disable the control
2
Teletext programme is an information in text form.
avoid sudden change of the volume when selecting different TV channel.
sources.
as movie, sports, etc. Changing White balance affects the appearance of all other colours on the screen.
buttons on the TV.
* The Teletext function is available for AV-21F25 only.
The other models do not have the Teletext function. Please check your TV’s model number. The model number is indicated at the rear of your TV.
1
9
2 3 7
5
0
4
6
8

Remote control buttons and basic functions

1
8
6
3
2
7
9
0 4
RM-C1260
WITH THE TELETEXT
FUNCTION
(AV-21F25)
No.Press To
1 POWER Turn on or off the TV from standby mode. 2 MENU/OK Display menu and confirm selected function. 3 5//2/3 Select and adjust menu function. 4 CHANNEL M Select the desired channel number. 5 VOLUME M Adjust the volume level. 6 TV/VIDEO Select TV or VIDEO terminal input. 7 MUTING Turn off the volume. Press this button again to resume the volume. 8 DISPLAY Display the programme number or video terminal number and PR list (channel
/BACK list) on the screen. You can select the channel using the PR list.
9 0~9, -/-- Select the programme number. For two digits programme number, press -/--,
0 RETURN, a) Return to the frequently view channel with one touch.
1 Press the DISPLAY button once to display the PR list. 2 Press 5//2/3 button to choose a channel, then press the MENU/OK button.
You can confirm the favorite channels in the PR list. The channels set to favorite channels are indicated with coloured mark.
On the other hand, you can use this button to return to the previous menu.
then press the number button.
1 Choose the channel you want to register. 2 Press and hold RETURN, button until “RETURN PLUS PROGRAMMED!”
To cancel, press and hold RETURN, button until “RETURN PLUS CANCELED!” appears.
b) Return to the previously viewed channel, if you have not set or have
cancelled the Return channel as above.
5
RM-C1261
WITHOUT THE
TELETEXT FUNCTION (AV-14A15/AV-14F15/ AV-21C15/AV-21E15 AV- 21F15/AV-21Q14)
appears.
3
Remote control buttons and basic functions (continued)
How to operate menus and menu locations
TO Operation Note
Display the MENU. Press the MENU/OK button 2.To exit the MENU, press the
Display the top menu. Press 5/∞ buttons 3 to choose a menu title. Press ∞ button 3 to display the
Then press MENU/OK button 2. next page for more functions.
Display the 2nd menu. Press 5/∞ buttons 3 to choose a menu title.
Then press MENU/OK button 2.
Display the 3rd menu. Press 5/∞ buttons 3 to choose a menu title.
Then press MENU/OK button 2.
Return to the previous Press the DISPLAY/BACK button* 8.– menu. Choose the setting of Press 5/∞ buttons 3 to choose a function. Press the MENU/OK button 2 to a function. Then press the 2/3 buttons 3 to change the exit from the menu.
setting.
Adjust the effect level Press 5/∞ buttons 3 to choose a function. of a function. Then press the 2/3 buttons 3 to adjust the
effect level.
Display the sub menu Press 5/∞ buttons 3 to choose a function. of a function. Then press MENU/OK button 2 to display
the sub menu.
DISPLAY/BACK button* 8 or choose EXIT menu.
The following chart shows locations of functions in menus. In this manual, location of a function is described as follows:
MENU Top menu 2nd menu
MENU Top menu 2nd menu
3rd menu
Note: Some functions have the 4th menus as the sub-menus. *To exit the menu, the on screen display will show BACK indicated in blue. But it doesn’t refer to the
blue button on the remote control. Instead, it refers to the DISPLAY/BACK button on the remote control.
Top menu 2nd menu Location 3rd menu Location
MENU INPUT EXT. INPUT P.12 - -
DISPLAY P.12 - -
PICTURE PICTURE MODE P.8 - -
* If you want to
adjust PICTURE SETTING menu, you must set PICTURE MODE menu to USER.
SOUND AI VOLUME P.10 - -
FEATURES OFF TIMER P.12 - -
INSTALL AUTO PROGRAM P.13 - -
EXIT - - - -
PICTURE SETTING P.8 - -
WHITE BALANCE P.8 - -
PICTURE FEATURES - VNR P.12
FAVORITE CH SETTING P.11
VIDEO SETTING P.11
COLOUR SYSTEM P.8
CHILD LOCK P.12 - -
EDIT/MANUAL P.13 DELETE, MOVE, MANUAL, INSERT P.13
LANGUAGE P.12 LANGUAGE P.12
BLUE BACK P.9 - -
AUTO SHUTOFF P.12 - -
TEXT LANGUAGE P.9 TEXT LANGUAGE P.9
4

TV buttons and functions

The following illustrations are for AV-21F25 and AV-14A15 only, which are used for explanation purpose. Your TV may not look exactly like the illustrated.
Front of the TV
9 7 4 3 2 18 6 5
AV-21F25
VIDEO AUDIO
IN (VIDEO-2)
MENU
OK
9 7 4 2 18 6 5
VIDEO AUDIO
VIDEO-1
INPUT
IN (VIDEO-2)
MENU
OK
OUTPUT
VIDEO
AUDIO
CHANNEL
VOLUME
0-=
No colour : TV’s main power is being turned off. Red : TV’s main power is being turned on.
Work as same as the button on the remote control unit
Note
menu after finish setting.
VIDEO-1
INPUT
=
OUTPUT
VIDEO
AUDIO
0-
AV-14A15
Rear of the TV
AV-21F25 AV-14A15
No. Button/terminal Description
1I(main power) Press to turn on or turn off the TV’s main power. 2 Power lamp Indicate the TV is being turned on or off.
3 TIMER lamp Lights when the TV is in the OFF TIMER mode. 4 Remote control sensor 5 VOLUME M Press to adjust the volume level. 6 CHANNELM Press to select the desired channel. 7 MENU Press to display the menu. 8 IN (VIDEO-2) Video and audio input jacks for VIDEO-2 mode. 9 Headphone jack. 0 Aerial socket.
- OUTPUT Video and audio output jacks. = VIDEO-1 INPUT Video and audio input jacks for VIDEO-1 mode.
How to operate the menus with the TV button
TV button
MENU MENU/OK button To display main menu and exit
CHANNEL M /5 button To select menu function. VOLUME M 2/3 button To adjust the desired function.
5
Loading...
+ 11 hidden pages