JVC AV-2134EE, AV-1434EE, AV-1434TEE, AV-2104EE, AV-2104TEE Instructions Manual

COLOUR TELEVISION

INSTRUCTIONS

Thank you for purchasing this JVC
colour television.
To ensure your complete
understanding, please read this
manual thoroughly before operation.

Locations ................................

2

Preparation .............................

4

Basic operation ....................

10

Remote control buttons

and functions........................

11

Using the TV’s menus..........

14

Using the button

on the TV...............................

17

Viewing a teletext

programme ...........................

19

Troubleshooting ...................

21

Specifications.......................

22

Contents

LCT1029-001A-H
0701-Ki-NV-JMT

 2001 VICTOR COMPANY OF JAPAN, LIMITED

WARNING:

TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR
MOISTURE.

CAUTION:

• TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES
REGARDING THE USE OF THIS TV.

• Operate only from the power source specified on the TV.

• Avoid damaging the power plug and power cord.

• Avoid improper installation and never position this TV where good ventilation is

unattainable. When installing this TV
distance recommendations must be
maintained between the floor and
wall, as well as installment in a tightly
enclosed area or piece of furniture.
Adhere to the minimum distance
guidelines shown for safe operation.

• Do not allow objects or liquid into the cabinet openings.

• In the event of a fault, unplug this TV and call a service technician. Do not

attempt to repair it by yourself or remove the rear cover.

• When you don’t use this TV for a long period of time, be sure to disconnect the
power plug from the AC outlet.

15 cm

10 cm 15 cm

10 cm

AV-1414EE AV-2134EE
AV-1434EE AV-1434TEE
AV-2104EE AV-2104TEE
AV-2114EE AV-2134TEE
AV-2124EE

2

Locations

1 ECO SENSOR button p.11
2 COLOUR SYSTEM button p.11
3 SOUND SYSTEM button p.11
4 DISPLAY button p.12
5 MENU buttons

• MENU

/

buttons

• MENU

/

buttons

6 TV/VIDEO button p.10
7 OFF TIMER button p.12
8 PICTURE MODE button p.12
9 CHANNEL SCAN button p.13
0 RETURN + button p.13

- CHANNEL –/+ buttons p.10
= POWER button p.6,10
~ MUTING button p.11
!% Teletext buttons p.19,20
@ Number buttons p.10
# -/-- button p.10
$ VOLUME –/+ buttons p.10

ECO

SENSOR

OFF

TIMER

PICTURE

MODE

CHANNEL

SCAN

REVEAL

SUBPAGE CANCEL

TV

TEXT

HOLD

RM-C90

INDEX SIZE

SYSTEM

COLOUR SOUND

MUTING

MENU

CHANNEL

RETURN+

POWER

DISPLAY

TV/VIDEO

TV/TEXT

VOLUME

123
456
789

0

-/--

1

4

6

7

8

-

9
0

5

2
3

=

!

$

@

%

#

~

RM-C90

3

1 ECO SENSOR button p.11
2 SOUND SYSTEM button p.11
3 COLOUR SYSTEM button p.11
4 TV/VIDEO button p.10
5 OFF TIMER button p.12
6 CHANNEL SCAN button p.13
7 RETURN + button p.13
8 DISPLAY button p.12
9 CHANNEL –/+ buttons p.10

POWER

123

456

789

RETURN+

0

-/--

PICTURE

MODE

SYSTEM

COLOUR

TV/VIDEO

CHANNEL

SCAN

OFF

TIMER

ECO

SENSOR

DISPLAY

MENU

VOLUME

MUTING

SOUND

5

6

!
@

9

3

2

1

8

4

7

#

~

-

0

=

CHANNEL

REMOTE CONTROL UNIT
RM-C364GY

0 POWER button p.6,10

- PICTURE MODE button p.12
= Number buttons p.10
~ -/-- button p.10
! MUTING button p.11
@ MENU buttons

• MENU

/

buttons

• MENU –/+ buttons

# VOLUME –/+ buttons p.10

RM-C364GY RM-C360GY

POWER

123

456

789

RETURN

+

0

-/--

PICTURE

MODE

SYSTEM

COLOUR

TV/VIDEO

CHANNEL

SCAN

OFF

TIMER

DISPLAY

MENU

VOLUME

MUTING

SOUND

5

6

!
@

9

3

2

8

4

7

#

~

-

0

=

CHANNEL

REMOTE CONTROL UNIT
RM-C360GY

Locations

4

Preparation

1. Connecting the aerial and external devices

Notes: .........................................................................................................................

• For further details, refer to the manuals provided with the devices you are connecting.

• Connecting cables are not supplied.

• The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either

jack is output through both. You cannot provide input to both the front and rear jacks at the
same time. Disconnect one input, or use one of the jacks as an output jack only (for
monitoring or recording).

• The rod aerial is supplied with the AV-1434TEE/AV-1414EE/AV-1434EE.

....................................................................................................................................

■ Connecting the aerial and VCR

Connecting the aerial

To install rod aerial:

Install into the top-rear aerial holder. Once installed, it cannot be removed.

• Illustration of AV-1434EE.

VHF/UHF outdoor aerial

VIDEO

AUDIO

IN

OUT

Indoor aerial

Rod aerial

To RF
output

To video
output

To aerial input

To audio
output

3

2

VCR

VHF/UHF outdoor aerial

1

VIDEO

AUDIO

IN

OUT

• Illustration of AV-1434EE.

Connecting the aerial and VCR

5

Preparation

■ Connecting other external devices

Note: ..................................................................................................................

• Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect
the headphones, the TV speakers go off.

...........................................................................................................................

• Illustration of AV-2104EE.

VIDEO

IN

OUT

AUDIO

VCR (for recording)

VCR (for playing)

To audio
output

To video
output

To audio
input

To video
input

• Illustration of AV-2104EE.

VIDEO AUDIO

IN

MENU

To audio
output

To video
output

Headphones

Camcorder

or

TV game

6

Preparation

CAUTION:...........................................

• Follow the cautions printed on the
batteries.

............................................................

Notes: .................................................

• Use AA/R6/UM-3 dry cell batteries.

• If the remote control does not work

properly, fit new batteries.
The supplied batteries are for testing, not
regular use.

............................................................

4. Turning your TV on

1.

Press the Main power button on the TV to turn the TV’s main power
on.

The POWER lamp or POWER/ON TIMER lamp lights.

If image does not appear:

Your TV is in the standby mode. Press the POWER button on the remote control
to turn your TV on.

• You can also turn on your TV by pressing the CHANNEL –/+ button on your TV.

To turn your TV off:

Press the POWER button on the remote control. Your TV enters the standby
mode.

To turn the TV’s main power off:

Press the Main power button on the TV.

2. Connecting the power cord

Insert the Power plug into an AC outlet.

3. Inserting batteries into the remote control

Correctly insert two batteries, observing the and polarities and inserting the

end first.

7

MENU 3
AUTO CH PRESET
MANUAL CH PRESET
LANGUAGE ENGLISH

SELECT BY EXIT BY
OPERATE BY -+

DISPLAY

5. Selecting the on-screen language

You can select the language for the on-screen display.

1.

Press MENU

/

to display the

MENU 3

menu,

then select

LANGUAGE

.

2.

Press MENU

/

or –/+ to select language.

The on-screen displays indications are in the selected
language.

6. Presetting TV stations

To view a TV programme, you must first preset TV channels to channels on the TV.
This TV has 100 channels (channel 1 to 99 and channel AV).

■ Auto Channel Preset

You can automatically preset all TV channels that can be received by your TV to
channels.

• The Auto Channel Preset function does not preset a TV channel to the AV channel
(channel number 0).

• If the TV cannot preset the TV channel you want to view, preset it manually. For details see
“Manual Channel Preset” on page 8.

1.

Press MENU

/

to display the

MENU 3

menu,

then select

A UT O CH PRESET

.

2.

Press MENU

/

or –/+ to start the Auto

Channel Preset function.

ON SEARCH

is displayed on the screen.

When you have finished presetting all TV channels that can be received on your
TV, the display will go out and the Auto Channel Preset function will end.

• To stop the Auto Channel Preset, press the MENU

/

or –/+ button.

Preparation

MENU 3
AUTO CH PRESET
MANUAL CH PRESET
LANGUAGE ENGLISH

SELECT BY EXIT BY
OPERATE BY -+

DISPLAY