JVC AV-16N311/V User Manual

COLOUR TELEVISION

INSTRUCTIONS

Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.

AV-16N311 AV-21V311 AV-21V331 AV-21W311 AV-21Y311 AV-25V311 AV-25V331 AV-29V311 AV-29V331

Safety precautions Preparation 3

1 Confirm which remote control you have..3 2 Insert the batteries into the remote control..3 3 Connecting the aerial and VCR 4 Connecting other devices 5 Connect the power cord to the AC outlet 6 SETUP TOUR

..............................................

Basic operation 7 Remote control buttons and functions 8

MUTING button BASS button PICTURE BOOSTER button COLOUR SYSTEM button SOUND SYSTEM button CINEMA SURROUND button DISPLAY button ECO SENSOR button PICTURE MODE button OFF TIMER button RETURN + button CHANNEL SCAN button FAVORITE CH button

.............................................

..................................................

.............................................

.....................................

...............................

.......................................

........................................

..............................

...................................

Using the TV’s menus 12

Basic operation

...........................................................

INPUT PICTURE TILT

...............................................................

VNR COMPRESS (16:9) AUTO SHUTOFF CHILD LOCK BLUE BACK VIDEO-2 SET AUTO CH PRESET SETUP TOUR LANGUAGE MANUAL CH PRESET

..............................................................

SKIP SUPER BASS Picture Adjustments Sound Adjustments AI VOLUME FAVORITE CH SETTING VIDEO SETTING AI ECO SENSOR AI ECO DISPLAY

............................................

...............................................

........................................

..........................................

.................................................

..................................................

................................................

.......................................

...............................................

..................................................

..................................

................................................

....................................

.....................................

..................................................

...............................

...........................................

..........................................

Attaching the Twin Port Bass Blaster Unit 20 TV buttons and parts 21 Using the buttons on the TV 22 Troubleshooting 23 Specifications 24

..................

..........................

......

...........................

.............................

...............................

........................

10 10 10 11 11

12 13 13 13 13 14 14 14 14 15 15 15 16 17 17 17 17 18 18 19 19 19

4 5 5 6

8 8 8 8 8 9 9 9

GGT0016-001A-E 0803-NIC-JMT

Safety precautions

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV.

• Operate only from the power source specified on the TV.

•Avoid damaging the power cord and main plug. When you unplug the TV, pull it out by the main plug. Do not pull on the power cord.

•Never block or cover the cabinet opening for ventilation. Never install the TV where good ventilation is unattainable. When installing this TV, leave spaces for ventilation around the TV more than the minimum distances shown in the diagram.

• Do not allow objects or liquid into the cabinet openings.

• In the event of a fault, unplug the TV and bring to JVC service centre. Do not attempt to repair it by yourself or remove the rear cover.

• The surface of the TV screen is easily damaged. Be very careful with it when handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it.

•When you don’t use this TV for a long period of time, be sure to disconnect the power plug from the AC outlet.

• The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

10 cm

15 cm

15 cm10 cm

WARNING

<AV-21W311 only>

A removable plastic cover is fixed to the television’s front Audio/Video connector. To prevent this cover from being accidentally swallowed by babies or children, remove it from the television and store it in a safe place. If the cover is swallowed seek the advice of a doctor immediately.

The Twin Port Bass Blaster Unit is packaged together with the TV. Before you use the TV, mount the Twin Port Bass Blaster Unit correctly on the TV.

Preparation

1 Confirm which remote control you have

Your TV comes with one of the three remote controls shown below. Functions you can operate differ depending on the type of remote control.

RM-C1306

RM-C1308 RM-C1313

For TV model: For TV model: For TV model:

AV-21V311 AV-21V331 AV-16N311

AV-21W311 AV-25V331 AV-21Y311 AV-25V311 AV-29V331 AV-29V311

MUTING

SYSTEM

COLOUR SOUND

DISPLAY

TV/VIDEO

OFF

TIMER

PICTURE

MODE

CHANNEL

SCAN

CHANNEL

POWER

CINEMA

SURROUND

ECO

SENSOR

123

456

789

RETURN

0-/

VOLUME

FAVORITE CH

RM-C1306

MUTING BASS

SYSTEM

123

OFF

456

789

RETURN

CHANNEL

FAVORITE CH

RM-C1308

CINEMA

SURROUND

0-/

VOLUME

COLOUR SOUND

DISPLAY

TV/VIDEO

TIMER

PICTURE

MODE

CHANNEL

SCAN

POWER

ECO

SENSOR

MUTING

SYSTEM

COLOUR SOUND

DISPLAY

TV/VIDEO

OFF

TIMER

PICTURE

MODE

CHANNEL

RETURN

SCAN

CHANNEL

PICTURE

POWER

BOOSTER

ECO

SENSOR

123

456

789

0-/

VOLUME

FAVORITE CH

RM-C1313

2 Insert the batteries into the remote control

Correctly insert two batteries, observing the , and polarities and inserting the . end first.

CAUTION:

Follow the cautions printed on the batteries.

Notes:

• Use AA/R6/UM-3 dry cell batteries.

• If the remote control does not work properly, fit new batteries. The supplied batteries are for testing, not regular use.

Preparation

3 Connecting the aerial and VCR

•Read the manuals provided with the devices. Depending on the device, the connection method may be different from the diagrams. Also the device settings may need to change depending on the connection method.

•Turn off all the devices including the TV.

• Connecting cables are not supplied.

• When connecting monaural audio to the TV, use the L/MONO jack.

• The AV-21Y311 and AV-16N311 are supplied with rod aerial but without matching aerial adapters.

•You can connect an S-VIDEO compatible device (such as an S-VHS VCR) to the S-connector with an S-VIDEO cable and enjoy the high quality picture of the S-VIDEO signal (Y/C signal). In that case, do not connect it to the TV with a video cable.

• If you connect the VCR to the TV only with an aerial cable, you should preset the video channel from the VCR to the AV channel (channel number 0) on this TV. See “MANUAL CH PRESET” on page 16 and preset it manually.

Connecting the aerial

To install rod aerial:

Install into the top-rear aerial holder. Once installed, it cannot be removed.

VHF/UHF outdoor aerial

Matching aerial adapter (supplied)

COMPONENT

VIDEO-1

(

)

VIDEO-2

OUTPUT

INPUT

OVER

MONO

• Illustration of AV-21Y311

Connecting the aerial and VCR

COMPONENT

VIDEO-1

(

VIDEO-2

INPUT

OVER

MONO

RRRC

To video output

To audio output

To RF output

Rod aerial

)

MONO

(1)

Indoor aerial

(2)

(3)

VHF/UHF outdoor aerial

OUTPUT

To S-video output

VCR

To aerial input

Preparation

4 Connecting other devices

If you are not connecting any other devices, skip step 4 and perform step 5.

• Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off.

• The OUTPUT terminal outputs the video and sound signals which you are viewing on the TV. You can dub them onto the VCR connected to the OUTPUT terminal. (The OUTPUT terminal cannot output S-VIDEO signals or component video signals. Also it cannot output any signals when the TV is turned off.)

• Connect components outputting a component signal (Y/CB/CR signal), such as a DVD player, to the VIDEO-2 terminal, and set VIDEO-2 SET function to “COMPONENT”. (See page 14.)

• The following illustrations are for the AV-21V311/AV-21V331/AV-25V311/AV-25V331. Your TV’s front and rear panels may not look exactly like the illustrations.

Front

Headphones

Rear

VIDEO-1

INPUT

OVER

MONO

RRR

COMPONENT

(

VIDEO-2

INPUT

)

MONO

OUTPUT

Camcorder or TV game

VCR (for playing) DVD player

(composite signals)

VCR (for recording)

DVD player

(component video signals)

5 Connect the power cord to the AC outlet

Operate only from the power source indicated on the rear of the TV.

Preparation

6 SETUP TOUR

When the TV is first turned on, it enters the SETUP TOUR mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the SETUP TOUR.

• In case of resetting that the reason for such as removal, you can set the AUTO CH PRESET function on the “MENU 3” menu. For details, see page 15.

1 Press the Main power button

on the TV.

The POWER lamp lights. After the JVC logo has been displayed, the TV automatically switches to the language setting mode.

SETUP TOUR

2 Press the CHANNEL –/+ or

the MENU

buttons to select the on-screen language.

SETUP TOUR

LANGUAGE

ENGLISH

OPERATE BY -+

EXIT BY

DIS PLAY

DISPLAY

button

buttons

CHANNEL –/+

buttons

POWER lamp

SYSTEM

COLOUR SOUND

DISPLAY

TV/VIDEO

OFF

TIMER

PICTURE

MODE

CHANNEL

SCAN

CHANNEL

Main power button

CINEMA

SURROUND

ECO

SENSOR

123

456

789

RETURN+

0-/

VOLUME

MENU t

buttons

3 The AUTO PROGRAMMING

function will start and the indicator blinks.

SETUP TOUR

NOW PROGRAMMING

STOP BY

•To stop the AUTO PROGRAMMING

function, press the CHANNEL m or

the MENU

buttons.

When all the TV channels that can be received on your TV have been preset, the display goes out and the AUTO PROGRAMMING function operation is completed.

• If a TV channel you want to view is not set to the channel, set it with the MANUAL CH PRESET function. For details, see page 16.

4 Upon the completion of

AUTO PROGRAMMING function, the message below is displayed.

SETUP TOUR

THANK YOU!

Basic operation

The illustration below is for the remote control RM-C1308. Your remote control may not look exactly like the illustration.

SURROUND

CINEMA

0-/

VOLUME

POWER

ECO

SENSOR

MUTING BASS

SYSTEM

COLOUR SOUND

DISPLAY

TV/VIDEO

123

OFF

TIMER

456

PICTURE

MODE

789

CHANNEL

RETURN

SCAN

CHANNEL

FAVORITE CH

RM-C1308

1 Press the POWER button to

turn your TV on.

• If your TV does not turn on, press the Main power button on the TV, then press the POWER button again.

•You can also turn on your TV by pressing any of the following buttons;

- the CHANNEL

m button

- the Number buttons

- the TV/VIDEO button

2 Select a channel.

■ Press the CHANNEL m button.

• Up/down selection cannot be selected for channels to which the SKIP has been set to “YES”. See page 17.

■ Press the Number buttons to enter the channel number.

• If you want to enter a two-digit number, press the -/-- button to select the two digit mode “--”, then enter the channel number.

3 Press the VOLUME –/+ button

to adjust the sound.

4To turn your TV off, press the

POWER button.

•We recommend that you press the Main power button on the TV to turn the main power off if you do not plan to use your TV for a long time or if you wish to save energy.

If the picture is not clear:

Press the COLOUR SYSTEM button to select another colour system, see page 8.

If the sound is not clear:

Press the SOUND SYSTEM button to select another sound system, see page 8.

Viewing Images from an External Device:

Press the TV/VIDEO button to select the VIDEO mode.

•You can also use the INPUT function to select the VIDEO mode. For details, refer to page 13.

Remote control buttons and functions

MUTING button

You can turn the sound off instantly.

Press this button.

To turn the sound on, press this button again.

BASS button

AV -21V331/AV-25V331/AV-29V331 only

You can enjoy a powerful bass sound by using the BASS (Bass Reflex) function.

Press this button to turn the BASS function on or off.

• To use this function, you must first mount the Twin Port Bass Blaster Unit packaged with the TV on top of the TV. For details, see page 20.

PICTURE BOOSTER button

When the picture is unclear because the reception level of the TV signal is low, activating the Picture Booster improves the picture clarity in some situations. Repeatedly press the PICTURE BOOSTER button to select the desired mode.

HIGH:

The Picture Booster is functioning at maximum.

LOW:

The Picture Booster is functioning at minimum.

OFF:

The Picture Booster is off.

• If the picture becomes abnormal when you set the Picture Booster to HIGH, then set it to LOW or OFF.

COLOUR SYSTEM button

If the picture is not clear or no colour appears, change the current colour system to another colour system.

Press this button to select the colour system.

AUTO PAL

NTSC4.43

SECAM

NTSC3.58

AUTO:

Automatic colour system selection.

•For the colour systems in each country or region, see the table “Broadcasting systems” on Back cover.

• If the picture is not normal in the AUTO mode, change the AUTO mode to another colour system.

SOUND SYSTEM button

If the sound is not clear even when the picture appears normal, change the current sound system to another sound system.

Press this button to select the sound system.

B/G MD/K

•For the sound systems in each country or region, see the table “Broadcasting systems” on Back cover.

•You cannot select any sound system when in a VIDEO mode.

+ 18 hidden pages

JVC AV-16N311/V User Manual

Contents

Safety precautions

Preparation

1 Confirm which remote control you have

2 Insert the batteries into the remote control

3 Connecting the aerial and VCR

4 Connecting other devices

5 Connect the power cord to the AC outlet

6 SETUP TOUR

Basic operation

Remote control buttons and functions

MUTING button

BASS button

PICTURE BOOSTER button

COLOUR SYSTEM button

SOUND SYSTEM button