JVC 1108TTH-AO-AO, DLA-RS0, PB006585599-1 User Manual

ENGLISH FRANÇAIS ESPAÑOL/CASTELLANO

DLA-RS10

PROYECTOR D-ILA

D-ILA PROJECTOR

PROJECTEUR D-ILA

DLA-RS10

INSTRUCTIONS

Getting Started

MANUEL D’INSTRUCTIONS

MANUAL DE INSTRUCCIONES

D-ILA PROJECTOR
PROJECTEUR D-ILA

PROYECTOR D-ILA

Preparation

DLA-RS10 / DLA-RS2 0

Basic Operation

© 2008 Victor Company of Japan, Limited

1108TTH-AO-AO

For Customer use :

Enter below the serial No. which is
located on the side of the cabinet.
Retain this information for future
reference.

Model No. DLA-RS10

Serial No.

Pour utilisation par le client :

Entrer ci-dessous le N° de série qui
est situé sous le boîtier. Garder
cette information comme référence
pour le futur.

N° de modèle DLA-RS10

N° de série

Instrucción para el cliente :

Introduzca a continuación el nº de
serie que aparece en la parte
inferior lateral de la caja. Conserve
esta información como referencia
para uso ulterior.

Modelo Nº DLA-RS10

Nº de serie

Settings

Troubleshooting

Others

PB006585599-1

edi d i t e d f rr o n t p a g e NC 7 /33 0/09

1

Safety Precautions

IMPORTANT INFORMATION

About the installation place

Do not install the projector in a place that cannot support
its weight securely.

If the installation place is not sturdy enough, the projector
could fall or overturn, possibly causing personal injury.

IMPORTANT SAFEGUARDS

Electrical energy can perform many useful functions. This
unit has been engineered and manufactured to assure your
personal safety. But IMPROPER USE CAN RESULT IN
POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In
order not to defeat the safeguards incorporated into this
product, observe the following basic rules for its installation,
use and service. Please read these Important Safeguards
carefully before use.

- All the safety and operating instructions should be read
before the product is operated.

- The safety and operating instructions should be retained
for future reference.

- All warnings on the product and in the operating instructions
should be adhered to.

- All operating instructions should be followed.

- Place the projector near a wall outlet where the plug can
be easily unplugged.

- Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.

- Do not use attachments not recommended by the product
manufacturer as they may be hazardous.

- Do not use this product near water. Do not use immediately
after moving from a low temperature to high temperature,
as this causes condensation, which may result in fire,
electric shock, or other hazards.

- Do not place this product on an unstable cart, stand, or
table. The product may fall, causing serious injury to a
child or adult, and serious damage to the product. The
product should be mounted according to the manufacturer’s
instructions, and should use a mount recommended by
the manufacturer.

- When the product is used on a cart, care
should be taken to avoid quick stops,
excessive force, and uneven surfaces
which may cause the product and cart to
overturn, damaging equipment or causing
possible injury to the operator.

- Slots and openings in the cabinet are
provided for ventilation. These ensure reliable operation of
the product and protect it from overheating. These openings
must not be blocked or covered. (The openings should
never be blocked by placing the product on bed, sofa, rug,
or similar surface. It should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is
provided and the manufacturer’s instructions have been
adhered to.)

Th is p ro du ct h as a H ig h In te ns it y
Discharge (HID) lamp that contains
mercury.

Disposal of these materials may be
regulated in your community due to
environmental considerations . For
disposal or recycling information, please
contact your local authorities or for USA,
the Electronic Industries Alliance:
http://www.eiae.org.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING:

THIS APPARATUS MUST BE EARTHED.

CAUTION:

To reduce the risk of electric shock, do not remove cover.
Refer servicing to qualified service personnel.

This projector is equipped with a 3-blade grounding
type plug to satisfy FCC rule. If you are unable to insert
the plug into the outlet, contact your electrician.

FCC INFORMATION (U.S.A. only)

CAUTION:

Changes or modification not approved by JVC could
void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply
with the limits for Class B digital devices, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provi d e r ea s on ab le pr ot ec t io n ag a in st h a rm fu l
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is encourage
to try to correct the interference by one or more of the
following measures:

●Reorient or relocate the receiving antenna.

●Increase the separation between the equipment and

receiver.

●Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

●Consult the dealer or an experienced radio/TV technician

for help.

MACHINE NOISE INFORMATION (Germany only)

Changes Machine Noise Information Ordinance 3. GSGV,
January 18, 1991: The sound pressure level at the operator
position is equal or less than 19 dB (A) according to
ISO 7779.

PORTABLE CART WARNING
(symbol provided by RETAC)

S3126A

-

To allow better heat dissipation, keep a clearance between
this unit and its surrounding as shown below. When this
unit is enclosed in a space of dimensions as shown below,
use an air-conditioner so that the internal and external
temperatures are the same.

-
the type of power supply to your home, consult your
product dealer or local power company.

- This product is equipped with a three-wire plug. This plug
will fit only into a grounded power outlet. If you are unable
to insert the plug into the outlet, contact your electrician to
install the proper outlet. Do not defeat the safety purpose
of the grounded plug.

- Power-supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or
against them. Pay particular attention to cords at doors,
plugs, receptacles, and the point where they exit from the
product.

- For added protection of this product during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and
disconnect the cable system. This will prevent damage to
the product due to lightning and power line surges.

- Do not overload wall outlets, extension cords, or
convenience receptacles on other equipment as this can
result in a risk of fire or electric shock.

- Never push objects of any kind into this product through
openings as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.

- Do not attempt to service this product yourself as opening
or removing covers may expose you to dangerous
voltages and other hazards. Refer all service to qualified
service personnel.

-

Unplug this product from the wall outlet and refer service to

qualified service personnel under the following conditions:

a) When the power supply cord or plug is damaged.

b) If liquid has been spilled, or objects have fallen on the product.

c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the

operating instructions. Adjust only those controls that are
covered by the Operation Manual, as an improper adjustment
of controls may result in damage and will often require
extensive work by a qualified technician to restore the product

to normal operation.
e) If the product has been dropped or damaged in any way.
f) When the product exhibits a distinct change in performance -

this indicates a need for service.

- When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer or with same characteristics as the original
part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.

-

Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to
determine that the product is in proper operating condition.

- The product should be placed more than one foot away
from heat sources such as radiators, heat registers,
stoves, and other products (including amplifiers) that
produce heat.

- When connecting other products such as VCR’s, and DVD
players, you should turn off the power of this product for
protection against electric shock.

- Do not place combustibles behind the cooling fan. For
example, cloth, paper, matches, aerosol cans or gas
lighters that present special hazards when over heated.

- Do not look into the projection lens while the illumination
lamp is turned on. Exposure of your eyes to the strong
light can result in impaired eyesight.

- Do not look into the inside of this unit through vents
(ventilation holes), etc. Do not look at the illumination lamp
directly by opening the cabinet while the illumination lamp
is turned on. The illumination lamp also contains ultraviolet
rays and the light is so powerful that your eyesight can be
impaired.

- Do not drop, hit, or damage the light-source lamp (lamp
unit) in any way. It may cause the light-source lamp to
break and lead to injuries. Do not use a damaged light
source lamp. If the light-source lamp is broken, ask your
dealer to repair it. Fragments from a broken light-source
lamp may cause injuries.

- The light-source lamp used in this projector is a high
pressure mercury lamp. Be careful when disposing of the
light-source lamp. If anything is unclear, please consult
your dealer.

- Do not ceiling-mount the projector to a place which tends
to vibrate; otherwise, the attaching fixture of the projector
could be broken by the vibration, possibly causing it to fall
or overturn, which could lead to personal injury.

- Use only the accessory cord designed for this product to
prevent shock.

*DO NOT allow any unqualified person to install the

unit.

Be sure to ask your dealer to install the unit (e.g.
attaching it to the ceiling) since special technical
knowledge and skills are required for installation. If
installation is performed by an unqualified person, it
may cause personal injury or electrical shock.

power source indicated on the label. If you are not sure of

150 mm

and above

150 mm and above

300 mm
and above

200 mm
and above

Getting started

Safety Precautions

2

ENGLISH

Getting Started

-

To allow better heat dissipation, keep a clearance between
this unit and its surrounding as shown below. When this
unit is enclosed in a space of dimensions as shown below,
use an air-conditioner so that the internal and external
temperatures are the same.

150 mm and above

300 mm
and above

150 mm

and above

200 mm
and above

power source indicated on the label. If you are not sure of

­the type of power supply to your home, consult your
product dealer or local power company.

- This product is equipped with a three-wire plug. This plug
will fit only into a grounded power outlet. If you are unable
to insert the plug into the outlet, contact your electrician to
install the proper outlet. Do not defeat the safety purpose
of the grounded plug.

- Power-supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or
against them. Pay particular attention to cords at doors,
plugs, receptacles, and the point where they exit from the
product.

- For added protection of this product during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and
disconnect the cable system. This will prevent damage to
the product due to lightning and power line surges.

- Do not overload wall outlets, extension cords, or
convenience receptacles on other equipment as this can
result in a risk of fire or electric shock.

- Never push objects of any kind into this product through
openings as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.

- Do not attempt to service this product yourself as opening
or removing covers may expose you to dangerous
voltages and other hazards. Refer all service to qualified
service personnel.

-

Unplug this product from the wall outlet and refer service to

qualified service personnel under the following conditions:

a) When the power supply cord or plug is damaged.

b) If liquid has been spilled, or objects have fallen on the product.

c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the

operating instructions. Adjust only those controls that are
covered by the Operation Manual, as an improper adjustment
of controls may result in damage and will often require
extensive work by a qualified technician to restore the product

to normal operation.
e) If the product has been dropped or damaged in any way.
f) When the product exhibits a distinct change in performance -

this indicates a need for service.

- When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer or with same characteristics as the original
part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.

Upon completion of any service or repairs to this product,

­ask the service technician to perform safety checks to
determine that the product is in proper operating condition.

- The product should be placed more than one foot away
from heat sources such as radiators, heat registers,
stoves, and other products (including amplifiers) that
produce heat.

- When connecting other products such as VCR’s, and DVD
players, you should turn off the power of this product for
protection against electric shock.

- Do not place combustibles behind the cooling fan. For
example, cloth, paper, matches, aerosol cans or gas
lighters that present special hazards when over heated.

- Do not look into the projection lens while the illumination
lamp is turned on. Exposure of your eyes to the strong
light can result in impaired eyesight.

- Do not look into the inside of this unit through vents
(ventilation holes), etc. Do not look at the illumination lamp
directly by opening the cabinet while the illumination lamp
is turned on. The illumination lamp also contains ultraviolet
rays and the light is so powerful that your eyesight can be
impaired.

- Do not drop, hit, or damage the light-source lamp (lamp
unit) in any way. It may cause the light-source lamp to
break and lead to injuries. Do not use a damaged light
source lamp. If the light-source lamp is broken, ask your
dealer to repair it. Fragments from a broken light-source
lamp may cause injuries.

- The light-source lamp used in this projector is a high
pressure mercury lamp. Be careful when disposing of the
light-source lamp. If anything is unclear, please consult
your dealer.

- Do not ceiling-mount the projector to a place which tends
to vibrate; otherwise, the attaching fixture of the projector
could be broken by the vibration, possibly causing it to fall
or overturn, which could lead to personal injury.

- Use only the accessory cord designed for this product to
prevent shock.

*DO NOT allow any unqualified person to install the

unit.

Be sure to ask your dealer to install the unit (e.g.
attaching it to the ceiling) since special technical
knowledge and skills are required for installation. If
installation is performed by an unqualified person, it
may cause personal injury or electrical shock.

Preparation

Basic Operation

Settings

Troubleshooting

Others

3

1

Dear Customer,

This apparatus is in conformance with the valid European directives and standards regarding electromagnetic
compatibility and electrical safety.

European representative of Victor Company of Japan, Limited is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany

Safety Precautions (Continued)

POWER CONNECTION

WARNING:
Do not cut off the main plug from this equipment.

If the plug fitted is not suitable for the power points in
your home or the cable is too short to reach a power
point, then obtain an appropriate safety approved
extension lead or adapter or consult your dealer.
If nonetheless the mains plug is cut off, dispose of the
plug immediately, to avoid a possible shock hazard by
inadvertent connection to the main supply. If a new main
plug has to be fitted, then follow the instruction given
below.

WARNING:
THIS APPARATUS MUST BE EARTHED.

For USA and Canada only
Use only the following power cord.

Power cord

The power supply voltage rating of this product is
AC110V – AC240V. Use only the power cord designated
by our dealer to ensure Safety and EMC.

Ensure that the power cable used for the projector is the
correct type for the AC outlet in your country. Consult
your product dealer.

Power cord

For United Kingdom For European continent
countries

IMPORTANT (Europe only):

The wires in the mains lead on this product are colored
in accordance with the following cord:
Green-and-yellow : Earth
Blue : Neutral
Brown : Live
As these colors may not correspond with the colored
making identifying the terminals in your plug, proceed
as follows:
The wire which is colored green-and-yellow must be
connected to the terminal which is marked M with the
letter E or the safety earth or colored green or green­and-yellow.
The wire which is colored blue must be connected to
the terminal which is marked with the letter N or colored
black.
The wire which is colored brown must be connected to
the terminal which is marked with the letter L or colored
red.

POWER CONNECTION

(United Kingdom only)

HOW TO REPLACE THE FUSE:

When replacing the fuse, be sure to use only a correctly
rated approved type, re-fit the fuse cover.

IF IN DOUBT —— CONSULT A COMPETENT ELECTRICIAN.

Open the fuse compartment with the blade screwdriver,
and replace the fuse.
(* An example is shown in the illustration below.)

Fuse

Getting started

4

ENGLISH

Dear Customer,

This apparatus is in conformance with the valid European directives and standards regarding electromagnetic
compatibility and electrical safety.

European representative of Victor Company of Japan, Limited is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany

Getting Started

Preparation

Basic Operation

Settings

Troubleshooting

Others

5

1

Getting started

ENGLISH

Information for Users on Disposal of Old Equipment and Batteries

[European Union only]

These symbols indicate that equipment with these symbols should not be disposed of
as general household waste. If you want to dispose of the product or battery, please
consider the collection systems or facilities for appropriate recycling.

Notice: The sign Pb below the symbol for batteries indicates that this battery

contains lead.

Battery

Products

DEUTSCH

Benutzerinformationen zur Entsorgung alter Geräte und Batterien

[Nur Europäische Union]

Diese Symbole zeigen an, dass derartig gekennzeichnete Geräte nicht als normaler
Haushaltsabfall entsorgt werden dürfen. Wenden Sie sich zur Entsorgung des Produkts
oder der Batterie an die hierfür vorgesehenen Sammelstellen oder Einrichtungen, damit
eine fachgerechte Wiederverwertung möglich ist.

Batterie

Hinweis: Das Zeichen Pb unterhalb des Batteriesymbols gibt an, dass diese Batterie

Blei enthält.

Produkte

FRANÇAIS

Informations relatives à l’élimination des appareils et des piles usagés, à l’intention des utilisateurs

[Union européenne seulement]

Si ces symboles figurent sur les produits, cela signifie qu’ils ne doivent pas être jetés
comme déchets ménagers. Si vous voulez jeter ce produit ou cette pile, veuillez
considérer le système de collection de déchets ou les centres de recyclage appropriés.

Notification: La marque Pb en dessous du symbole des piles indique que cette pile

contient du plomb.

Pile

Produits

NEDERLANDS

Informatie voor gebruikers over het verwijderen van oude apparatuur en batterijen

[Alleen Europese Unie]

Deze symbolen geven a an dat apparatuur met dit s ymbool niet mag worden
weggegooid als algemeen huishoudelijk afval. Als u het product of de batterij wilt
weggooien, kunt u inzamelsystemen of faciliteiten voor een geschikte recycling
gebruiken.

Batterij

Opmerking: Het teken Pb onder het batterijsymbool geeft aan dat deze batterij lood

bevat.

Producten

6

ENGLISH

ESPAÑOL / CASTELLANO

Información para los usuarios sobre la eliminación de baterías/pilas usadas

[Sólo Unión Europea]

Estos símbolos indican que el equipo con estos símbolos no debe desecharse con la
basura doméstica. Si desea desechar el producto o batería/pila, acuda a los sistemas
o centros de recogida para que los reciclen debidamente.

Atención: La indicación Pb debajo del símbolo de batería/pila indica que ésta contiene

plomo.

ITALIANO

Informazioni per gli utenti sullo smaltimento delle apparecchiature e batterie obsolete

[Solo per l’Unione Europea]

Questi simboli indicano che le apparecchiature a cui sono relativi non devono essere
smaltite tra i rifiuti domestici generici. Se si desidera smaltire questo prodotto o questa
batteria, prendere in considerazione i sistemi o le strutture di raccolta appropriati per il
riciclaggio corretto.

Nota: Il simbolo Pb sotto il simbolo delle batterie indica che questa batteria contiene

piombo.

PORTUGUÊS

Informação para os utilizadores acerca da eliminação de equipamento usado e pilhas

[Apenas União Europeia]

Estes símbolos indicam que o equipamento com estes símbolos não deve ser eliminado
juntamente com o restante lixo doméstico. Se pretende eliminar o produto ou a pilha,
utilize os sistemas de recolha ou instalações para uma reciclagem apropriada.

Aviso: O sinal Pb abaixo do símbolo para pilhas indica que esta pilha contém chumbo.

ΕΛΛΗΝΙΚΑ

Πληροφορίες για την απόρριψη παλαιού εξοπλισμού και μπαταριών

[Ευρωπαϊκή Ένωση μόνο]

Αυτά τα σύμβολα υποδηλώνουν ότι ο εξοπλισμός που τα φέρει δεν θα πρέπει να
απορριφθεί ως κοινό οικιακό απόρριμμα. Εάν επιθυμείτε την απόρριψη αυτού του
προϊόντος ή αυτής της μπαταρίας, χρησιμοποιήστε το σύστημα περισυλλογής ή
εγκαταστάσεις για ανάλογη ανακύκλωση.

Σημείωση: Το σύμβολο Pb κάτω από το σύμβολο μπαταρίας υποδηλώνει ότι η

μπαταρία περιέχει μόλυβδο.

Productos

Baterías/pilas

Prodotti

Batteria

Produtos

Pilha

Προϊόντα

Μπαταρία

Getting Started

Preparation

Basic Operation

Settings

Troubleshooting

Others

7

1

Getting started

DANSK

Brugerinformation om bortskaffelse af gammelt udstyr og batterier

[Kun EU]

Disse symboler angiver, at udstyr med disse symboler ikke må bortskaffes som
almindeligt husholdningsaffald. Hvis du ønsker at smide dette produkt eller batteri ud,
bedes du overveje at bruge indsamlingssystemet eller steder, hvor der kan ske korrekt
genbrug.

Batteri

Bemærk: Tegnet Pb under symbolet for batterierne angiver, at dette batteri indeholder

bly.

Produkter

Tietoja vanhojen laitteiden ja akkujen hävittämisestä

[Vain Euroopan unioni]

Nämä symbolit ilmaisevat, että symboleilla merkittyä laitetta ei tulisi hävittää tavallisen
kotitalousjätteen mukana. Jos haluat hävittää tuotteen tai sen akun, tee se hyödyntämällä
akkujen keräyspisteitä tai muita kierrätyspaikkoja.

Huomautus: Akkusymbolin alapuolella oleva Pb-merkintä tarkoittaa, että akku sisältää

lyijyä.

Akku

Tuotteet

Information för användare gällande bortskaffning av gammal utrustning och batterier

SUOMI

SVENSKA

[Endast den Europeiska unionen]

Dessa symboler indikerar att utrustning med dessa symboler inte ska hanteras som
vanligt hushållsavfall. Om du vill bortskaffa produkten eller batteriet ska du använda
uppsamlingssystem eller inrättningar för lämplig återvinning.

Observera! Märkningen Pb under symbolen för batterier indikerar att detta batteri

innehåller bly.

Batteri

Produkter

Opplysninger til brukere om kassering av gammelt utstyr og batterier

[Bare EU]

Disse symbolene viser at utstyr med dette symbolet, ikke skal kastes sammen med
vanlig husholdningsavfall. Hvis du vil kassere dette produktet eller batteriet, skal du
vurdere å bruke innsamlingssystemene eller andre muligheter for riktig gjenbruk.

Merk: Tegnet Pb under symbolet for batterier, viser at batteriet inneholder bly.

Batteri

Produkter

NORSK

8

ENGLISH

РУССКИЙ

Сведения для пользователей по утилизации старого оборудования и батарей

[только для Европейского союза]

Данные символы указывают на то, что оборудование, на которое они нанесены,
не должны утилизироваться, как обычные бытовые отходы. При необходимости
утилизировать такое изделие или батарею обратитесь в специальный пункт
сбора для их надлежащей переработки.

Уведомление: Надпись Pb под символом батарей указывает на то, что данная

батарея содержит свинец.

ČESKY

Informace pro uživatele k likvidaci starého zařízení a baterií

[Pouze Evropská unie]

Tyto symboly označují, že produkty s těmito symboly se nesmí likvidovat jako běžný
odpad. Pokud chcete produkt nebo baterii zlikvidovat, využijte sběrný systém nebo
jiné zařízení, které zajistí řádnou recyklaci.

Upozornění: Značk a Pb pod symbolem pro baterie zname ná, že tato baterie

obsahuje olovo.

POLSKI

Informacje dla użytkowników dotyczące pozbywania się zużytego sprzętu i baterii

[Tylko kraje Unii Europejskiej]

Te sym bole ozn acza ją, że sprz ętu nie nale ży w yrz ucać raz em z odp adam i
gospodarczymi. Jeśli trzeba pozbyć się tego produktu lub ba terii, proszę skorzystać
z sy stemu odbioru lub urządzeń do zbió rki odpadów elekt ronicznych, w cel u
odpowiedniego ponownego ich przetworzenia.

Uwaga: Oznaczenie Pb, znajdujące się pod symbolem baterii wskazuje, że ta bateria

zawiera ołów.

MAGYAR

Felhasználói információ az elhasznált berendezések és akkumulátorok elhelyezéséről

[Csak az Európai Unióban]

Ez a szimbólum azt jelzi, hogy a berendezés nem helyezhető az általános háztartási
hulladék közé. Ha meg szeretne szabadulni a terméktől vagy az akkumulátortól, akkor
legyen tekintettel az gyűjtő rendszerre vagy intézményekre a megfelelő hasznosítás
érdekében.

Megjegyzés: Az alábbi Pb szimbólum - ha az akkumulátoron megtalálható - azt jelzi,

hogy az akkumulátor ólmot tartalmaz.

Изделия

Батарея

Produkty

Baterie

Produkty

Bateria

Termékek

Akkumulátor

Getting Started

Preparation

Basic Operation

Settings

Troubleshooting

Others

9

Main Features

Supports Multiple Digital Devices

●

Comes with 2 independent HDMI terminals that allows digital

transmission of high denition signals. (

P18

)

Beautiful Images on Big Screen

●

Enjoy smooth and high resolution video images with

no visible grid, brought about by full high denition
resolution of 1920 x 1080 pixels. (

P26

)

Perfect for Any Location

●

Comes with an 80% vertical and 34% horizontal lens

shift function. (

P23

)

1

Getting started

Contents

Getting started

Safety Precautions.............................................2

Main Features...................................................10

Contents...........................................................12

How to Read this Manual/Accessories/

Optional Accessories.......................................13

About this Manual................................................13

Check the Accessories.......................................13

Optional Accessories..........................................13

Controls and features.............................................14

How to Use the Remote control ......................17

Loading Batteries..................................................17

Effective Range of Remote Control Unit...........17

Settings

Setting Menu...................................................30

Procedures for Menu Operation......................30

Setting Menu......................................................31

Customizing Projected Images....................42

Changing the Initial Setting of Picture Mode .42

Registering User-dened Picture Mode...........43

Registering User-dened Picture Mode from the

Menu...................................................................43

Troubleshooting

Troubleshooting...............................................44

What to Do When these Messages

Preparation

Selecting Connecting Devices....................18

Connecting......................................................19

Connecting via Video Cable and S-Video

Cable................................................................19

Connecting via Component Video Cable........19

Connecting via HDMI Cable..............................20

Connecting via HDMI-DVI Conversion Cable...20

Connecting via SCART-RCA Cable....................21

Connecting via RGB Video Cable......................21

Connecting via Trigger Cable.............................22

Installing the Projector and Screen.................23

Set Angle..................................................................23

Shift Adjustment.....................................................23

Screen Size and Projection Distance...............25

Are Displayed.................................................46

About Warning Indicators

.............................

47

Actions to Be Taken for Warning Mode...........47

Replacing the Lamp........................................48

Procedure for Lamp Replacement.................48

Resetting Lamp Time.........................................50

Cleaning and Replacing the Filter.................51

Others

RS-232C Interface...........................................52

RS-232C Specications.......................................52

Command Format..............................................52

RS-232C Communication Examples................55

Copyright and Caution.................................56

About Trademarks and Copyright....................56

　 Caution.................................................................56

Basic Operation

Projecting Image..............................................26

Convenient Features during Projection...........28

Setting the Screen Size........................................28

Masking the Surrounding Area of an Image......28

12

Mounting this Unit..............................................57

Specications..............................................58

Dimensions..........................................................59

ENGLISH

Optional Accessories

About this Manual

BACK

TEST

HIDE

BRIGHT

CONT

SHARP

COLOR

TINT

N.R

GAMMA

C.TEMP

INFO

LENS.AP

ASPECT

MENU

CINEMA1

CINEMA2

NATURAL

DYNAMIC

STAGE

Check the Accessories

How to Read this Manual/
Accessories/Optional Accessories

Getting Started

This manual mainly describes the operating method using the remote control.

● Buttons on the remote control are described as [Button Name].

● Items on the menu are described as “Selection Item”.

Buttons to be used are colored in a darker

shade.

■

Conventions in this manual

Describes the limitations of the functions or usage.

Indicates good-to-know information.

Describes operational precautions.

P13 Indicates relevant pages for reference.

Preparation

Basic Operation

The power cord supplied varies depending on the destination.

For the US market (X1):

Remote Control

For the EU market (X2):

AAA size Batteries

(for operation conrmation)

● Instruction manual, warranty card and other printed material are also included.

Power Cord

For UK (2m)

Please check with your authorized dealer for details.

● Replacement Lamp: BHL5010-S (Lamp Unit)

● Replacement Filter (black in appearance): PB006560999 (Inner Filter)

Power Cord

For USA (2m)

Power Cord

For European continent countries (2m)

Settings

Troubleshooting

Others

13

1

Getting started

Controls and features

■

Front Side/Left Side

Do not place your fingers in the gap at the lens

●

during lens shift adjustment. This may cause injuries
if your ngers are caught in between the gap.

(

Do not let your ngers or other objects get caught in

●

between the lens cover while closing the cover. This
can cause injuries or malfunction.

■

Rear Side/Top Side/Right Side

P23

)

CAUTION

Exhaust Vent

Remote Sensor

(

P17

)

Lens Cover

Air Inlet

Lens Cover (opened)

(

P26

)

(closed)

14

To connect the power cord (

Lamp Cover (

)

P26

Remote Sensor (

)

P48

P17

)

ENGLISH

WARNING

LAMP

STANDBY/ON

INPUT

HIDE

MENU

BACK

OK

Light on (Red): Warning mode

(

P47

)

Getting Started

Light on (Red):

Standby mode

Light on (Green):

During projection

Blinking (Green):

Image is temporarily hidden

(
Blinking (Red)

(

P27

Cool Down mode

P27

)

:

)

Left button

Down button

To display the menu

(

P30

Light on/Blinking (Orange):

Lamp warning

(

)

P47

To turn on/off the power

To switch input (

To hide the image temporarily

(

Up button

Right button

To return to the previous menu

)

P26

P27

)

)

Preparation

Basic Operation

■

Bottom Surface

Air inlets/Filter (

Feet: The height (0 to 5 mm) can be adjusted by turning the foot.

Air inlets

)

P52

Manual button for lens cover:

Press and hold the button to open the lens cover.

Do not close lens cover when projecting. Otherwise

●

it will cause malfunction, heat and re.

CAUTION

Settings

Troubleshooting

Others

15

1

BACK

TEST

HIDE

BRIGHT

CONT

SHARP

COLOR

TINT

N.R

GAMMA

C.TEMP

INFO

LENS.AP

ASPECT

LENS

INPUT

STANDBY

ON

MENU

CINEMA1

CINEMA2

NATURAL

STAGE DYNAMIC

USER1

USER2

USER3

RM-MH2GB

LIGHT

Getting started

Controls and features (continued)

■

Remote Control

To control lens (

To display information (

Lens Aperture (

To set gamma (

To adjust color density (

To adjust hue (

To adjust brightness (

To display/close the menu

To turn off the power

P26

P41

P42

P42

P42
P42
P42

To display test pattern

(

P30

To turn on the power

)

)

To select input mode (

To set the screen size (

P26

P28

)

)

)
)

)

To adjust color temperature (

To adjust noise reduction (

P42

P42

)

)

)
)

To adjust sharpness (
To adjust contrast (
To hide the image temporarily (

P42

P42

)

)

)

P27

To select or conrm

)

To return to the previous menu

To switch picture mode (

P42

)

16

To illuminate buttons on the remote control
for 7 seconds

ENGLISH

Effective Range of Remote Control Unit

30°

30°

20°

20°

30°

30°

20°

20°

A

B

Loading Batteries

How to Use the Remote control

Getting Started

1

2 3

● If the remote control has to be brought closer to the projector to operate, it means that the batteries are wearing out.

When this happens, replace the batteries. Insert the batteries according to the + - marks.

● Be sure to insert the - end rst.

● If an error occurs when using the remote control, remove the batteries and wait for 5 minutes. Load the batteries again

and operate the remote control.

■ When directing the remote control

toward this unit

This unit

● When aiming the remote control towards the

remote sensor on this unit, ensure that the
distance to the sensor in front or at the rear of

this unit is within 7 m.

● If the remote control fails to work properly,

move closer to this unit.

Preparation

Basic Operation

Settings

■

When reecting off a screen

● Ensure that the total of distance A between

this unit and screen and distance B between

remote control and screen is within 7 m.

● As the efciency of signals reected from the

remote control unit differ with the type of

screen used, operable distance may decrease.

Screen

Remote control

Remote control

This unit

Troubleshooting

Others

17

2

G B R

SYNC

S-VIDEO

VIDEO

RS-232C

TRIGGER

HDMI 1

HDMI 2

Y

CB/PB

CR/PR

Preparation

Selecting Connecting Devices

● Do not turn on the power until connection is complete.

● The connection procedures differ according to the device used. For details, refer to the instruction manual of the device to be

connected.

● For audio output, connect the device to an amplier.

● The images may not be displayed depending on the devices and cables to be connected.

Use an HDMI compliant cable (sold separately) with the HDMI logo.

● It may not be possible to connect to this unit depending on the dimension of the connector cover of the cables to be

connected.

DVD Recorder

To connect via HDMI terminal (

)

P20

To connect via component video terminals (

To connect RS-232C terminal

(external control) (

DVD Player

)

P52

P19

)

18

To connect via video terminal (

Notebook PC

To connect via Trigger terminal (

P19

)

To connect via S-video terminal (

P19

)

P22

)

VCR and camcorder

Connecting

Connecting via Component Video Cable

Connecting via Video Cable and S-Video Cable

B R

G

SYNC

S-VIDEO

VIDEO

RS-232C

HDMI 1

HDMI 2

Y

CB/PB

CR/PR

TRIGGER

SYNC

B

R

G

SYNC

S-VIDEO

RS-232C

VIDEO

HDMI 1

HDMI 2

Y

CB/PB

CR/PR

ENGLISH

Getting Started

This unit

To video input termina

To S-video input terminal

This unit

video cable

(sold separately)

l

S-video cable

(sold separately)

Video output

VCR and camcorder

S-video output

Preparation

Basic Operation

Settings

To component video input terminals

Component video cable

(sold separately)

●

Set “COMP.” in the setting menu to “Y Pb/Cb Pr/Cr”. ( P35 - 12 )

DVD player

Component video output
terminals

CR/PR (red)

CB/PB (blue)

Y (green)

Troubleshooting

Others

19

2

Connecting via HDMI Cable

Connecting via HDMI-DVI Conversion Cable

B

R

G

SYNC

VIDEO

HDMI 1

HDMI 2

Y

CB/P

B

CR/PR

G B

R

SYNC

S-VIDEO

VIDEO

RS-232C

HDMI 1

HDMI 2

Y

CB/PB

CR/PR

Connecting(Continued)

Preparation

This unit

DVD recorder

This unit

To HDMI 1 or HDMI 2 input terminal

HDMI cable (sold separately)

HDMI output terminal

Notebook PC

To HDMI 1 or HDMI 2 input terminal

HDMI-DVI conversion cable

(sold separately)

● If noise is produced, take PCs (including notepads) away from this unit.

20

DVI output terminal

Connecting via SCART-RCA Cable

Connecting via RGB Video Cable

RS-232C

G B

R

SYNC

S-VIDEO

VIDEO

HDMI 1

HDMI 2

Y

CB/PB

CR/PR

RS-232C

This unit

To RGB video and
sync signal input terminals

ENGLISH

Getting Started

Preparation

DVD player for European market

Basic Operation

SCART-RCA cable

(sold separately)

● Set “COMP.” in the setting menu to “SCART”.( P35 -

This unit

12

SCART terminal

)

Settings

Troubleshooting

Device equipped with RGB output

To RGB video input terminals

RGB video cable

(sold separately)

● Set “COMP.” in the setting menu to “RGB”.( P35 -

● For information on compatible input signals, see “Specications”. ( P58)

12

)

RGB video output terminals

R(Red)

B(Blue)

G(Green)
(Includes sync signals)

Others

21

2

SYNC

B RG

SYNC

S-VIDEO

VIDEO

RS-232C

HDMI 1

HDMI 2

Y

CB/PB

CR/PR

TRIGGER

Connecting via Trigger Cable

Preparation

Connecting(Continued)

This unit

To Trigger output terminal

Screen

Trigger cable

(sold separately)

Do not supply the power to the other devices.

●

Do not connect audio terminals of the other devices such as

●

CAUTION

headphones etc. Otherwise, this may cause a malfunction of
the other devices or injury.

Using beyond the rated value will cause malfunction.

●

Exercise adequate caution to prevent short circuit as the trigger

●

terminal outputs a voltage of 12V.

Trigger input terminal

(Φ3.5)

22

ENGLISH

Set Angle

Shift Adjustment

80%

34%34%

80%

Lens center

Installing the Projector and Screen

While installing, please place this unit and the screen perpendicular to each other. Failing to do so may
increase trapezoidal distortion. Please refer to “Keystone”. ( P38 -

● The angle range which can be set for this unit is ±10°.

24

)

Getting Started

10°

10°

● Malfunctions may occur if the angle is not set within the above-mentioned range.

10°

10°

Installing the projector and screen

1

■

* 0% up/down position (center)

* 0% left/right position (center)

Left/Right position

■

Up/Down position

Approximately 34% (maximum) of

the projected image

Approximately 34% (maximum) of

the projected image

Preparation

Basic Operation

Settings

■

Shifting range of projected image

Approximately 80% (maximum) of

the projected image

Troubleshooting

Approximately 80% (maximum) of

the projected image

Others

23

2

BACK

Back

Operate

Select

Exit

MENU

Focus

Lens Control

BACK

Back

Operate

Select

Exit

MENU

Zoom

Lens Control

BACK

Back

Operate

Select

Shift

Lens control

LENS

LENS

LENS

Preparation

Installing the Projector and
Screen(Continued)

2

Adjust such that the projected image is in the center of the screen

1

2

3

4

Adjust the image position to the center of the screen by pressing (the up, down, left and right buttons).

● It may be necessary to set “Pixel Adjust” in the setting menu after adjusting the image position. ( P38 -

22

)

24

Screen Size and Projection Distance

Determine the distance from the lens to the screen to achieve your desired screen size.
This unit uses a 2.0x power zoom lens for projection.

■

Relationship Between Projection Screen Size and Projection Distance

Projection Screen Size

(Diagonal Length)

Aspect Ratio 16:9

Approximate Projection Distance

W(Wide) to T(Tele

)

Projection Screen Size

(Diagonal Length)

Aspect Ratio 16:9

ENGLISH

Approximate Projection Distance

W(Wide) to T(Tele

)

Getting Started

Preparation

60"

(Approx. 1.52m)

70"

(Approx. 1.78m)

80"

(Approx. 2.03m)

90"

(Approx. 2.29m)

100"

(Approx. 2.54m)

110"

(Approx. 2.79m)

120"

(Approx. 3.05m)

130"

(Approx. 3.30m)

Approx. 1.78m to

Approx. 2.09m to Approx. 4.28m

Approx. 2.40m to Approx. 4.89m

Approx. 2.70m to Approx. 5.51m

Approx. 3.01m to Approx. 6.13m

Approx. 3.31m to Approx. 6.75m

Approx. 3.62m to Approx. 7.36m

Approx. 3.92m to Approx. 7.98m

Approx. 3.66m

140"

(Approx. 3.56m)

150"

(Approx. 3.81m)

160"

(Approx. 4.06m)

170"

(Approx. 4.32m)

180"

(Approx. 4.57m)

190"

(Approx. 4.83m)

200"

(Approx. 5.08m)

Approx. 4.23m to Approx. 8.60m

Approx. 4.53m to Approx. 9.22m

Approx. 4.84m to Approx. 9.84m

Approx. 5.14m to Approx. 10.45m

Approx. 5.45m to Approx. 11.07m

Approx. 5.75m to Approx. 11.68m

Approx. 6.06m to Approx. 12.30m

● The projection distances in the table are provided only as a guide. Use them as a reference during installation.

● To adjust the installation, use a projected image of aspect ratio 16:9.

Basic Operation

Settings

Troubleshooting

Others

25

3

WARNING

LAMP

ST ANDBY/ON

INPUT

ON

BACK

TEST

HIDE

BRIGHT

CONT

SHARP

COLOR

TINT

N.R

GAMMA

C.TEMP

INFO

LENS.AP

ASPECT

LENS

INPUT

STANDBY

ON

MENU

CINEMA1

CINEMA2

NATURAL

STAGE

DYNAMIC

USER1

USER2

USER3

LIGHT

RM-MH2GB

BACK

Back

Operate

Select

Exit

MENU

Focus

Lens Control

HDMI 1 HDMI 2 　 COMP． Video S-Video

LENS

INPUT

Basic Operation

Projecting Image

This section describes the basic operations to project input images on the screen.

Preparation

1

Insert the power plug to the power

outlet

① Connect to this unit

STANDBY/ON

② Connect to the power outlet

Light on (Red)

①

2

Turn on the power

Power Cord

(Supplied)

②

STANDBY/ON

Light on (Green)

● You can also press the button on the unit to turn on the power.

( P15)

● The lens cover will be opened.

3

Project the image

1 Select input mode

26

● You can also select the input mode by pressing the
unit. ( P15)

2 Play back the selected device

4

Adjust the position of the projection

screen

● See “Installing the Projector and Screen” ( P23) and “Lens

Control” ( P38 - 21 ) for the adjustment method.

5

Adjust the image size (zoom) and the

focus

1 Adjust the focus

Adjust accordingly by pressing

the up/down buttons

button on the

Adjust the image size (zoom)

LENS

Focus

Zoom

Shift

LENS

BACK

HIDE

HIDE

BACK

Back

Operate

Select

Exit

MENU

Zoom

Lens Control

LENS

2

ENGLISH

Getting Started

TIPS

You can hide the image temporarily

● Every time the

will be switched among “Focus”, “Zoom” and “Shift”.

3 To end

Turn off the power

6

While a confirmation

screen is displayed

Adjust accordingly by

pressing the up/down

buttons

button is pressed, the adjustment item

You can hide the image temporarily.

Green light blinks
when the image is

● Press the

image.

hidden.

button again to display

● The power cannot be turned off when the

image is temporarily hidden.

MEMO

About Cool Down mode

Preparation

Basic Operation

Settings

Blinking (Red Lamp)

Cool Down mode

Light on (Red Lamp)

● When power off, the lens cover will be closed.

● The power cannot be turned off within approximately 90 seconds

after it has been turned on. Start operation only after 90 seconds
time.

● You can also press the button on the unit to turn off the

power. ( P15)

● Pull out the power plug when the unit will not be used for a

prolonged time.

● The Cool Down mode is a function to

cool down the lamp for approximately 60

seconds after projection is complete. This

function prevents the internal parts of the
unit from deformation or damage due to

overheating of the lamp. It also prevents

lamp blowout and premature shortening

of lamp life.

During Cool Down mode, the [STANDBY/

●

ON] indicator blinks in red.

● After the Cool Down mode is complete,

the unit automatically returns to standby

mode.

● Do not pull out the power plug during

Cool Down mode. This may shorten the
lamp life and cause a malfunction.

Troubleshooting

Others

27

3

Setting the Screen Size

Masking the Surrounding Area of an Image

ASPECT

4:3 16:9 zoom

BACK

TEST

HIDE

BRIGHT

CONT

SHARP

COLOR

TINT

N.R

GAMMA

C.TEMP

INFO

LENS.AP

ASPECT

LENS

INPUT

STANDBY

ON

MENU

CINEMA1

CINEMA2

NATURAL

STAGE

DYNAMIC

USER1

USER2

USER3

LIGHT

RM-MH2GB

Basic Operation

Convenient Features during Projection

You can change the screen size of the projected image or hide the surrounding area of an image for which
quality at the outer area has deteriorated.

The projected image can be set to a most appropriate screen size

(aspect ratio).

● The screen size can also be set from “Aspect(Video)” of the setting menu.

( P36 - 14 )

● When PC signals are input, the “Aspect(Computer)” setting will be available

instead. ( P36 - 15 )

■

Input Image and Projected Image by Different Screen Size

Settings

Input Image

4:3

Screen Size

16:9 Zoom

SDTV(4:3) Aspect Ratio:

SDTV(4:3)

Image recorded in

landscape (black

bands on top and
bottom) of DVD
software

Same
Most appropriate
screen size

Aspect Ratio:
Same
Small image is
projected

Aspect Ratio:
Landscape
Image is stretched
horizontally

Aspect Ratio:
Landscape
Image is stretched
horizontally

Aspect Ratio:
Same
Top and bottom
of the image are
missing

Aspect Ratio:
Same
Most appropriate
screen size

● Depending on the input image, selecting “4:3” may result in a vertically

stretched image, while selecting “16:9” provides you with the most

appropriate screen size.

28

Images for which quality at the outer area has deteriorated can be projected by

masking (hiding) the surrounding area of the projected image.

1

Project the image

Image for which quality
at the outer area has

deteriorated.

MENU

Mask the image

MENU

Exit

BACK

Back

Select

Operate

0

0
0

0

6500K

2

Normal

Picture Mode

Contrast
Brightness
Color
Tint
Color Temp.
Gamma
Advanced

Lens Aperture

Picture Adjust

Natural

Reset

Video/S-Video

COMP.

Aspect（Video）
Aspect（Computer)

V-stretch
Picture Position
Over scan

Film Mode

Exit

MENU

BACK

Back

Select

Operate

HDMI

16:9
Auto

Auto

Off

Off

Mask

Off

5%

Off

2.5%

Input Signal

自动

Exit

MENU

BACK

Back

Select

Operate

Off

Off

5%

16:9

Video/S-Video

COMP.

Aspect（Video）
Aspect（Computer)
V-stretch
Picture Position
Over scan

Film Mode

HDMI

Auto

Auto

Mask

5%

2.5%

Off

Input Signal

MENU

2

1 Display the setting menu

2 Select “Input Signal” “Mask”

ENGLISH

Getting Started

MEMO

● Masking is available only when high

denition images are input.

Preparation

①Select

②Confirm

3 Set a mask value

①Select

②Confirm

Basic Operation

Settings

Troubleshooting

3

Example:
When the “Mask” value is
changed from “Off” “5%”

To end

Others

29

4

MENU

MENU

Exit

BACK

Back

Select

Operate

0

0
0

0

6500K

2

Normal

Picture Mode

Contrast

Brightness

Color

Tint

Color Temp.

Gamma

Advanced

Lens Aperture

Picture Adjust

Natural

Reset

4:3

4:3

16:9

Zoom

Exit

MENU

BACK

Back

Select

Operate

Off

Off

5%

Video/S-Video

COMP.

Aspect（Computer)

Aspect（

Video

)

V-stretch
Picture Position
Over scan

Film Mode

HDMI

Auto

Auto

Mask

Input Signal

4:3

16:9

16:9

Zoom

Exit

MENU

BACK

Back

Select

Operate

Off

Off

5%

Video/S-Video

COMP.

Aspect（Computer)

Aspect（

Video

)

V-stretch
Picture Position
Over scan

Film Mode

HDMI

Auto

Auto

Mask

Input Signal

MENU

BACK

TEST

HIDE

BRIGHT

CONT

SHARP

COLOR

TINT

N.R

GAMMA

C.TEMP

INFO

LENS.AP

ASPECT

LENS

INPUT

STANDBY

ON

MENU

CINEMA1

CINEMA2

NATURAL

STAGE

DYNAMIC

USER1

USER2

USER3

LIGHT

RM-MH2GB

Procedures for Menu Operation

Settings

Setting Menu

Projected images can be adjusted to a desired view by changing the initial settings.

Example:

When changing “Aspect(Video)” from “4:3” to “16:9”

1

Display the setting menu

2

Select “Input Signal” “Aspect(Video)”

①Select

②Confirm

3

Set to “16:9”

30

①Select

4

To end

②Confirm