Compact
Standard H
Jumbo
Instruction Manual
Filter System Compact
Standard H
Jumbo
www.juwel-aquarium.com
Introduction
Thank you for choosing a JUWEL Aquarium product.
Our products represent over 30 years experience in the manufacturing of aquariums
and their acessories applying most modern production techniques bringing together
the JUWEL Aquarium system, which is both easy to use and simple to maintain.
Always unplug all immersed electrical equipment from mains before placing your hands
into the water.
The JUWEL Filter System
The JUWEL Filter System is a highly effective two-stage biological filtration system,
using components specifically designed to perform together perfectly.
As this Filter System is positioned inside the aquarium, no hoses are required, meaning
no leaking connections, since the water remains inside the aquarium.
The output from the powerhead also remains at full strength since there is no need to
pass the water through hoses, connections etc. This means that it remains at full
capacity ensuring an even and smooth stream of water through the filtration media.
The large filtration volume of the sponges ensures a highly effective biological
cleansing of the water.
Filter Wool (white pad)
The white filter wool acts as a mechanical pre-filter, removing large particles of dirt
and excess food which in turn ensures that the other sponges do not get clogged.
Active Carbon Sponge (black)
The black activated carbon sponge sits on top of the blue coarse filter sponges, and
removes chemical impurities from the water which cannot be removed biologically.
Nitrate Removal Sponge (green)
The Sponge contains micro-organisms, which will, once developed, reside inside the
sponges and in the water. These micro-organisms feed of nitrates and will reduce them
significantly. The JUWEL Filtration system provides the optimum housing for these
micro-organisms.
Filter Sponge Coarse (blue)
The coarse blue filter sponges allow bacteria cultures to develop quickly, cleaning the
water which is now free from chemical impurities.
Filter Sponge Fine (blue)
The fine blue sponges and the bacteria cultures living in them, clean the water of even
the smallest impurities.
!
Compact H,
Standard H,
Jumbo
Compact
Installation of the JUWEL Filter System in your Aquarium
The JUWEL Filter has been designed for installation in the right hand corner of the
aquarium.
First of all, please remove all internal components of the Filter System leaving you
with the empty filter housing.
In order to ensure that the Filter System is securely fastened to the glass panels, we
have included a tube of special JUWEL Aquarium silicon. Apply the silicone onto the
housing as shown in the picture, on both the side and the rear walls.
Your Aquarium should be empty or as near as empty, allowing you to wipe the glass
dry.
Position the filter housing in the aquarium in such a way that the top of the filter
housing rises 1 cm above the maximum water level of your aquarium.
Press the housing onto the glass panels firmly, and hold it for a few minutes. Allow
the silicone to dry out for at least 24 hours.
SILIKON
2
Set-Up of the JUWEL Filter System
We recommend that you prepare the filter system ready for use before you fill the
aquarium with sand/gravel, plants and water.
Please observe the following instructions carefully to ensure that the filter system
works at its optimum.
The JUWEL Filter System consists of:
- 1 x heater (only incl. in complete aquariums)
- 1 x top heater holder (pic. 1)
- 1 x power head
- 1 x power head adapter
- 2 x outlet nozzles
- 3 pieces white pre-filter wool wrapped in plastic for protection (3 weeks supply)
- 1 active carbon sponge wrapped in plastic for protection
- 2 filter baskets
- 1 green nitrate removal sponge wrapped in plastic
- 1 blue coarse filter sponge
- 1 blue fine filter sponge (in Compact Filter System, i.e. Rekord range) or
- 2 blue fine filter sponges (in Filter System Compact H, Standard H and Jumbo)
1. In order to set up the filter system, you may elect to leave the heater in position.
2. Unpack the power head and check that it has been correctly assembled. It consists
of the motor unit (pic. 3), the impeller and the pump housing. Make sure that the
housing is securely fastened to the motor unit and that the wire is fastened properly
to the housing.
3. Remove the white pre-filter wool and remove the two filter baskets containing the
rest of the filter media. Remove the protective cover from the white pre-filter wool,
black carbon sponge and green nirate removal sponge and rinse the blue sponges
under warm water.
4. Put the fine blue filter sponges into one of the baskets and lower it into the filter
housing. In the second basket, place the coarse blue filter sponge, the nitrate romoval
sponge and the black carbon sponge (without the protective cover) and lower it into
the filter housing. Put one piece of the white pre-filter wool on top of the black
sponge.
5. Position the power head onto the adapter and turn it clockwise until it is securely
fastened. Position the adapter on the separation wall and press it down firmly. The
water outlet nozzle from the pump should now be exactly opposite the hole in the
filter housing. Attach the two water outlet nozzles from outside of the filter housing
through this hole and onto the water outlet nozzle of the power head. Using the water
outlet nozzles you can adjust the waterflow to the position you prefer.
6. The JUWEL Filter System is now ready for use.
Filter Compact H, Standard H, Jumbo
Filter Compact
The JUWEL Aquarium Filter System is a biological filter system. For it to work
effectively, bacteria cultures will need to grow inside the blue sponges. This process
can take up 6-8 weeks for the filter to fully mature. Consequently we recommend to
decorate and plant the aquarium and add just a few (3-5) hardy fish in order to help
the maturation process. Please test the water on a weekly basis to monitor the water
conditions and once the water is safe you can begin to add more fish.
Recommendation
JUWEL Air Diffuser
The special JUWEL Aquarium Air Diffuser provides additional oxygen to the aquarium if
desired. This can be ordered from your JUWEL Aquarium retailer (Part No. 85145).
3
Care and maintenance of the JUWEL Filter System
Maintenance of the Filter System
The JUWEL Filter System requires very little maintenance if you follow the following
instructions.
- Replace the white filter wool pad once a week. If you have large fish, then this may
require changing slightly more frequently. This will ensure that the filter sponges will
not be clogged by larger dirt particles.
- Replace the black activated carbon sponge every 4-6 weeks. Again, if you have large
fish then this may be to be more frequent. This ensures that any chemical impurities
from the water will be removed. Please note that the chemicals which are absorbed by
the activated carbon contained in the sponge, will be released to the water again if
the change intervals are too long.
- If the filter wool and the activated carbon sponge are replaced as suggested, then it
is sufficient to carefully clean or replace the coarse blue sponges at 6-12 weeks and
the fine blue sponges at 3-6 months only.
Important - Cleaning or replacing the blue filter sponges will affect the bacteria
cultures. We recommend therefore, that only one of the sponges at a time is cleaned or
replaced, never at the same time.
You do not need to worry about the liquid dirt accumulating at the bottom of the
filter housing. Normally, this dirt contains important biological substances which
enhance the water quality.
Please do not worry if some dirt gets into the water during the cleaning process
causing cloudiness. After the filter system is back in operation, the water will soon
clear again.
- In order to allow a proper level of micro-organisms in the filtration system it is
recommended to exchange the sponge every 6 weeks. The nitrate removal sponge
contains bacteria, which will after a while reduce the nitrate level in the aquarium
significantly.
Important:
Always use original JUWEL Aquarium filter media to ensure the optimum
performance of your system.
Care and Maintenance
The JUWEL Aquarium Power head requires very little maintenance but we recommend
that you check it regularly to ensure optimum performance.
In order to maintain the power head, please follow the following steps:
1. Disconnect the heater and the power head from the power supply and allow the
heater to cool for approx. 30 minutes.
2. Remove the heater and place it on a non-flammable, safe surface.
3. Remove the nozzles from the power head.
4. Remove power head and adapter from the filter system.
5. Turn the adapter to the right to free it from the power head. Check that the rubber
seals do not show any sign of wear and tear. In case of doubt we recommend to
replace the adapter to ensure continuing optimum performance.
6. Remove the power head adapter from the motor and remove the impeller.
7. Clean and check all parts, in particular the impeller for wear and tear especially the
magnet.
Thereafter please reassemble the power head and reposition it back into the filter.
Recommendation:
With exchange of the impellers 400, 600 and 1000 the flow rate can be varied.
In order to ensure that the power head operates at its optimum and maintains its
low noise level, we recommend to check and potentially replace the parts subject
to wear and tear, such as the impeller and the adapter.
All spare parts are available from your local JUWEL Aquarium retailer.
Safety instructions:
Never operate the power head out of water.
Always unplug the power head from the power supply before removing it from the
filter.
The power head is intended for indoor use and for use in fluids up to 35°C.
Never repair the electrical cord or plug. In case of damage replace the complete
power head.
4
Proper disposal (electrical waste)
The labelling on the product or on the accompanying literature declares that it
must not be disposed of, at the end of its service life, with the ordinary
household rubbish. Please dispose of this equipment separately from other waste,
to protect the environment or public health from damage by unregulated waste
disposal. Recycle the equipment and support the sustained recycling of material
resources.
Private users should contact the dealer who sold them the product or the
responsible authorities, for a demonstration on how to recycle the equipment in
an environmentally friendly way.
Guarantee
We guarantee the performance of the JUWEL-Aquarium product or its accessories to the
purchaser for a period of 24 months from the date of purchase according to the
following conditions:
§ 1 Extent of the guarantee
(1) This guarantee extends to the JUWEL-Aquarium product and its components
excluding items subject to wear and tear such as light tubes and filter media. It is
limited to the product as such and does not cover damage to other property and/or
individuals. In addition, the provisions of the product liability law apply. These
provisions are not limited by the aforementioned arrangement.
(2) It is the prerogative of JUWEL-Aquarium to decide whether the guarantee is
performed by means of repair or replacement. If neither repair nor replacement can
ensure the performance of the JUWEL-Aquarium product the purchaser is entitled to
demand a reduction in price or to return the product against repayment of the
purchase price.
§ 2 Guarantee period and settlement procedure
(1) The guarantee period begins on the day of the purchase of the product from the
retailer. Claims under this guarantee will not be honoured, if
(a) the damage is caused as a result of improper use or maintenance or non-
observance of the instructions given in this manual
(b) the product or its components have been maintained by persons or companies not
authorised by the manufacturer to do so
(c) the product or its components have been damaged by mechanical means of
whatsoever kind, in particular broken glass
(2) All claims under this guarantee have to be notified to the retailer, from whom the
aquarium has been purchased without delay, however, not longer than 2 weeks from
the day of first occurrence of defects. Rights under the consumer protection laws will
remain unaffected.
(3) Guarantee claims will only be accepted if the validity of the claim is supported by
evidence of purchase of the JUWEL-Aquarium product.
This declaration of guarantee is a translation only. In case of doubts the original
German language version prevails.
We reserve the right to make technical alterations.
© JUWEL AQUARIUM
® JUWEL, Trigon, Vision, Rekord, Rio, Lido, Monolux, Duolux, Multilux, High-Lite
5
Loading...