juwel Heater Instruction Manual

Instruction Manual

Heater

www.juwel-aquarium.com

Introduction

Thank you for choosing a JUWEL Aquarium product.
Our products represent over 30 years experience in the manufacturing of aquariums

and their acessories applying most modern production techniques bringing together
the JUWEL Aquarium system, which is both easy to use and simple to maintain.

Always unplug all immersed electrical equipment from mains before placing your hands
into the water.

Installation of the heater inside the JUWEL Filter System

The JUWEL Aquarium Heater is designed to fit perfectly inside the filter system freeing
up space in the aquarium and keeping it safe from your fish.

The JUWEL Aquarium Heater is delivered with the heater holder (Pic. 1) necessary to
install it inside the JUWEL Aquarium Filter System.

For all JUWEL Filter Systems please proceed as follows:

1. Make sure that the top heater holder is correctly positioned at the top of the heater
(Pic. 1).

2. Slowly slide the heater until the top holder is secured firmly on the filter housing.
The heater is correctly positioned if the heater holder is safely resting on the housing

(Pic. 2).
The heater is now operational.

➀

➁

Compact Super

alle Filtersysteme

Installation of the heater without the JUWEL Filter System

In order to allow the installation of the JUWEL Aquarium Automatic Heater we have
provided suction cups together with the heater.

First of all please attach the suction cups to the heater tube.
Thereafter, fasten the heater to the glass pane of your aquarium and check that it is

safely positioned.
You achieve the best result if you remove some of the water from the aquarium

beforehand and clean that part of the glass pane to which you wish to fasten the
heater. Please ensure that the heater is positioned in such a way that the heater head
is above the water level.

Having installed the heater in your aquarium you may refill it again and connect the
heater to the power supply.

Please observe that the heater may be damaged irreversibly, if it is operating without
or in an insufficient level of water.

Recommendation:

The JUWEL automatic heater warms the water of your aquarium up to 28°C
depending on a nomal room temperature of 18°C. If you keep your aquarium in
rooms below this or your fish need a higher temperature, we recommend to
purchase a second heater.

Safety instructions:

Only connect the heater once the aquarium is filled with water at least to the
minimum water level of the heater.

Never use the heater outside the aquarium.
Operate the heater indoors only.

2