Jura X8 Instructions for Use

Download

X8 Instructions for Use

For your safety: read and understand manual before use.

JURA Type 739

Table of contents

Your X8

IMPORTANT SAFEGUARDS 4 Control elements 8 1 Preparing and using for the first time 10

JURA on the Internet ....................................................................................................................................10

Setting up the machine ..............................................................................................................................10

Filling the bean container ...........................................................................................................................10

Determining the water hardness ..............................................................................................................10

First-time use .................................................................................................................................................11

Connecting milk ...........................................................................................................................................14

Connecting an accessory (via Bluetooth) ................................................................................................14

2 Preparation 15

Espresso, coffee and other specialty coffees ...........................................................................................16

Latte macchiato, cappuccino and other specialty coffees with milk ..................................................16

Preparing two specialty coffees .................................................................................................................17

Permanently setting the amount of water for the cup size ................................................................. 17

Adjusting the grinder ..................................................................................................................................18

Hot water .......................................................................................................................................................19

3 Daily operation 20

Filling the water tank ..................................................................................................................................20

Switching on the machine .........................................................................................................................20

Daily maintenance ...................................................................................................................................... 20

Regular maintenance ..................................................................................................................................21

Switching off the machine ..........................................................................................................................21

4 Permanent settings in programming mode 22

Adjusting the product settings ................................................................................................................. 23

Positioning products on the start screen ...............................................................................................25

Enable or disable one-off settings ...........................................................................................................26

Enable or disable setting of cup volume ................................................................................................26

Enable and disable products ..................................................................................................................... 27

Automatic switch-off .................................................................................................................................. 27

Setting the water hardness .......................................................................................................................28

Milk system rinsing .....................................................................................................................................28

Unit for amount of water ...........................................................................................................................29

Language ......................................................................................................................................................29

Query counter readings and version ....................................................................................................... 30

5 Maintenance 31

Rinsing the machine ................................................................................................................................... 32

Rinsing the milk system .............................................................................................................................32

Cleaning the milk system ..........................................................................................................................33

Dismantling and rinsing the dual spout .................................................................................................34

Inserting the filter .......................................................................................................................................36

Changing the filter ......................................................................................................................................36

Table of contents

Cleaning the machine ................................................................................................................................ 37

Descaling the machine ..............................................................................................................................38

Cleaning the bean container ......................................................................................................................41

Descaling the water tank ............................................................................................................................41

6 Display messages 42 7 Troubleshooting 43 8 Transport and environmentally friendly disposal 44

Transport/ Emptying the system .............................................................................................................44

Disposal .........................................................................................................................................................44

9 Technical data 45 10 Index 46 11 JURA contact details/ Legal information 48

Symbol description

Warnings

This is the safety alert symbol. lt is used to alert you to potential personal injury

J DANGER

J WARNING

J CAUTION

NOTICE NOTICE is used to address practices not related to personal injury.

hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

Symbols used

‘Coffee’ Display message

Prompt to take action. This symbol means that you are being prompted to perform some action.

Information and tips to make it even easier to use your JURA.

IMPORTANT SAFEGUARDS

Follow the basic safety

precautions

When using electrical appliances, basic safety precautions shall always be followed, to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

Z Read all instructions. Z Do not touch hot surfaces. Use handles or knobs. Z To protect against fire , electric shock and injury to persons, do

not immerse power cord, plugs, or body of machine in water or other liquid.

Z Close supervision is necessary when any appliance is used by

or near children.

Z Unplug from outlet when not in use and before cleaning.

Allow to cool before putting on or taking off parts, and before cleaning the appliance.

Z Do not operate any appliance with a damaged cord or plug or

after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment.

Z The use of an accessory attachment not recommended by the

appliance manufacturer may result in fire, electric shock, or

injury to persons.

Z Do not use outdoors. Z Do not let the cord hang over the edge of a table or counter,

or touch hot surfaces.

Z Do not place on or near a hot gas or electric burner, or in a

heated oven.

Z To disconnect, turn any control to ‘OFF’ then remove plug

from wall outlet.

Z Do not use appliance for other than intended use. Z Use extreme caution when dispensing hot steam, hot water

or hot coffee.

SAVE THESE INSTRUCTIONS.

Pass them on to any subsequent user.

IMPORTANT SAFEGUARDS

Intended use

Special power cord set

instructions

The appliance is designed and intended for domestic and office use only. It shall only be used for coffee prepar ation and to heat milk and water , according to these instructions. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility for the consequences of improper use.

People, including children, who

Z do not have the physical, sensory or mental capabilities to use

the appliance safely or

Z are inexperienced or lack knowledge in how to use the

appliance safely

must be supervised by a responsible person when using it, or must be instructed in how to use it correctly.

Z A short power-supply cord is to be provided to reduce risks

resulting from becoming entangled in or tripping over a

longer cord.

Z The cord shall be arranged so that it will not drape over the

counter top or table top where it can be pulled on by children

or tripped over.

Z This appliance has a 3-pin grounded plug. Z Do not modify the plug in any way.

Extension cords are available an may be used if care is exercised in their use. If the user chooses to use an extension cord,

Z the marked electrical rating of the extension cord should be

at least as great as the electrical rating of the appliance, and

Z if the appliance is of the grounded type, the extension cord

should be a grounding type 3-wire cord, and

Z the longer cord should be arranged so that it will not drape

over the counter top or tabletop where it can be pulled on by

children or tripped over.

J WARNING

To reduce the risk of fire or electric shock, DO NOT remove any service covers. DO NOT modify the appliance in any way that is not described in these instructions. NO user serviceable part s included. Repair MUST be done by authorized personnel only.

In the event of signs of damage, for example if there is a smell of burning, unplug the machine immediately from outlet and contact JURA customer service.

IMPORTANT SAFEGUARDS

J CAUTION

NOTICE

Any servicing other than cleaning and user maintenance shall be performed by an authorized service representative:

Z Do not immerse base in water or try to disassemble. Z Do not put the appliance or any individual parts in the

dishwasher.

Z Check voltage to be sure that the voltage indicated on the

name plate complies with your voltage. The name plate is

located on the underside of the appliance.

Z Never use warm or hot water to fill the water container. Use

cold water only.

Z Keep your hands and the cord away from hot parts of the

appliance during operation.

There is a risk of scalds or burns on the spouts and the cappuccino frother / nozzle.

Z Keep children away. Z Do not touch any hot parts. Use the handles or knobs

provided.

Z Ensure that the cappuccino frother / nozzle is correctly fitted

and clean. If incorrectly fitted or if they become blocked, the

cappuccino frother or its parts might come off.

Z Never clean with scouring powders or hard implements. Z Ensure that the ventilation slots are not covered. Z Never pull out the drip tray during the brewing process. Only

pull the drip tray when the display instructs you or when the

appliance is ready for use.

IMPORTANT SAFEGUARDS

NEVER DO

(or you will void your

warranty protection):

Z Never fill instant coffee, chocolate mix etc. into the bean

container or ground coffee funnel (filler funnel for ground

coffee). It will damage the functioning of the brewing

chamber.

Z Never fill sugar coated coffee beans into the bean container.

In case of doubt, call your dealer.

Z Never fill anything other than coffee beans into the bean

container (no chocolate, no rice, no nuts, no spices, nothing

other than roasted coffee beans).

Z Never fill frozen beans into the bean container. If you store

beans in the freezer, let them thaw 3 to 4 hours before filling

them into the bean container.

Z Never fill anything but fresh, cold and clean water into the

water tank, except when decalcifying.

Z Never use mineral or carbonated w ater . Y ou can use tap wat er ,

bottled water, spring water and reverse osmosis water.

Z Never do anything with the machine which is not described in

these instructions. In case of doubt, call your dealer.

Control elements

2 3

J HOT

1 Cover 2 Filler funnel for cleaning tablet 3 Bean container with aroma preservation cover

(lockable) 4 Water tank cover (lockable) 5 Water tank 6 Hot-water spout 7 Power cord (back of the machine) 8 Coffee grounds container

9 On/Off button Q 10 Grinder adjustment wheel 11 Height-adjustable dual spout 12 Insert for drip tray 13 Cup platform 14 Drip tray

1 Display 2 Multi-function buttons (button function

depends on what is shown in the display)

Back of the machine: Service socket for JURA Smart Connect (behind cover)

Control elements

Accessories

Spanner for aroma preservation cover, water tank cover and grinder adjustment wheel

Container for milk system cleaning

1 Preparing and using for the first time

JURA on the Internet

Setting up the machine

Filling the bean container

NOTICE

Visit us on the Internet (www.jura.com). You will find interesting and up-to-date information on your X8 and on every aspect of coffee.

When setting up your X8, please note the following:

Place the X8 on a horizontal surface that is not sensitive to

water. Choose a spot for your X8 which protects the machine against

overheating. Ensure that the ventilation slots are not covered.

The aroma preservation cover of the bean container is lockable (spanner supplied as standard).

Coffee beans which have been treated with additives (e.g. sugar), ground coffee or freeze-dried coffee will damage the grinder.

T Only use roasted, untreated coffee beans to fill the bean

container.

T Remove the aroma preservation cover. T Remove any dirt or foreign objects from inside the bean

container.

T Fill the bean container with coffee beans and close the

aroma preservation cover.

Determining the water hardness

When you use the machine for the first time, you must set the water hardness. If you do not know the hardness of your water, you can find this out first. Use the Aquadur® test strips supplied with the machine.

T Hold the test strip briefly (for 1second) under flowing water.

Shake off the water.

T Wait for about 1minute.

1 Preparing and using for the first time

T You will then be able to read the degree of water hardness

from the discoloration of the Aquadur® test strip and the description on the packaging.

Level Display German

Degree (°dH)

Not active – – – – Very soft water <3 <3 < 53.4 None Soft water > 4 > 4 > 71 1 Hard water > 8.4 > 8.4 > 150 2 Very hard water > 14 > 14 > 250 3

First-time use

J WARNING

Degrees of general hardness (°dGH)

When using the machine for the first time, you can choose whether you want to operate X8 with or without the CLEARYL Pro Smart filter cartridge. As well as limescale, the filter cartridge filters many other substances that impair aroma and flavor out of the water. These substances may negatively affect the coffee. To enjoy the best quality coffee at all times, we recommend that you use CLEARYL Pro Smart.

If the machine is operated with a defective power cord, there is a danger of potentially fatal electric shock.

T Never use a machine which is damaged. T Never use a machine which has a defective power cord.

E The water volume is given as standard in ‘oz’. You can change

this setting to ‘ml’ in programming mode (see Chapter 4 ‘Permanent settings in programming mode – Unit for amount of water’).

Parts per million (ppm)

Indicator Strip number

of ‘reddish’ fields

Precondition:The bean container has been filled.

T Insert the mains plug into a power socket. T Press the On/Off button Q to switch the X8 on.

‘Choose language’

E To display more languages, press the ‘ T’ button (bottom

right).

1 Preparing and using for the first time

T Press the button that corresponds to the language you want,

e.g.

‘English’. ‘Saved’ appears briefly on the display to confirm the setting. ‘Water hardness’

E If you do not know the hardness of your water, you must find

this out first (see Chapter 1 ‘Preparing and using for the first time – Determining the water hardness’).

First-time use with filter

cartridge activation

NOTICE

T Press the

setting, for example to

T Press the

‘<’ or ‘>’ button to change the water hardness

‘25°dH’.

‘Save’ button. ‘Saved’ appears briefly on the display. ‘Filter operation’

E Now decide whether you want to operate your X8 with or

without a CLEARYL Pro Smart filter cartridge.

Operation with filter cartridge: go straight to the next section.

Operation without filter cartridge: see Chapter 1 ‘Preparing and using for the first time – First-time use without filter cartridge activation’.

Milk, sparkling mineral water or other liquids can damage the water tank or the machine.

T Only fill the water tank with fresh, cold water.

T Remove the water tank and rinse it with cold water. T Open the filter holder. T Insert the filter cartridge into the water tank, exerting slight

pressure.

T Close the filter holder. It will click into place audibly.

First-time use without filter

cartridge activation

1 Preparing and using for the first time

T Fill the water tank with fresh, cold water and reinsert the

tank.

E The machine automatically detects that you have just inserted

the filter cartridge.

‘Change the filter’ / ‘Saved’ ‘Filter is being rinsed’

, Water flows directly into the drip tray. Rinsing of the filter stops automatically.

‘System is filling’, the system fills up with water. ‘Empty drip tray’

T Empty the drip tray and coffee grounds container and put

them back into the machine.

‘Machine is rinsing’, the system is rinsed.

The rinse stops automatically. Your X8 is ready for use.

E The start screen shows the products you can prepare. Press

the

‘T’ button to display more products.

E If the filter is active, this is indicated by a blue filter symbol at

the bottom of the display.

NOTICE

Milk, sparkling mineral water or other liquids can damage the water tank or the machine.

T Only fill the water tank with fresh, cold water.

T Press the

‘No filter’ button. ‘Saved’ appears briefly on the display. ‘Fill water tank’

T Remove the water tank and rinse it with cold water. T Fill the water tank with fresh, cold water and reinsert the

tank.

‘System is filling’, the system fills up with water. ‘Machine is heating’ ‘Machine is rinsing’

, the system is rinsed.

The rinse stops automatically. Your X8 is ready for use.

E The start screen shows the products you can prepare. Press

the

‘T’ button to display more products.

1 Preparing and using for the first time

Connecting milk

Connecting an accessory (via Bluetooth)

Your X8 creates fine, creamy, feather-light milk foam with a perfect consistency. The most important requirement for frothing milk is a milk temperature of 39–46 °F (4–8 °C). We would therefore recommend using a milk cooler or a milk container.

T Connect the milk pipe to the dual spout. T Connect the other end of the milk pipe to a milk container

or a milk cooler.

Your X8 is equipped with the JURA Smart Connect. This allows you to connect the machine to a compatible accessory (e.g. the JURA Cool Control Wireless milk cooler) via Bluetooth.

Precondition:The start screen is displayed.

T Press the

‘1/5’

T Press the ‘T’ button several times until ‘5/5’ is displayed. T Press the

‘Connect accessory’

T Now follow the instructions on the display to connect the

accessory to the X8.

‘Pc’ button.

‘Connect accessory’ button.

2 Preparation

J WARNING

Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn.

T Use extreme care when handling hot liquid or steam. T Allow liquid to cool down before drinking. T In the event of scalding, rinse affected area with cold water

and seek medical attention.

T Keep children AWAY.

Basic information about preparing drinks:

The display shows the products you can prepare. Press the ‘T’

button to display more products. During the grinding operation you can select the

coffee strength of single products by pressing the

‘>’ buttons.

During preparation you can change the preset amounts (e.g.

water and amount of milk foam) by pressing the buttons. The water volume is given as standard in ‘oz’. You can change

this setting to ‘ml’ in programming mode (see Chapter 4 ‘Permanent settings in programming mode – Unit for amount of water’). You can stop the machine at any time while a specialty coffee

or hot water is being prepared. To do this, press the button.

‘<’ and

‘<’ and ‘>’

‘Cancel’

Coffee tastes best served hot. A cold porcelain cup cools the beverage – and impairs the taste. We therefore recommend pre-warming the cups. The full coffee aroma can develop only in pre-warmed cups. You can purchase a JURA cup warmer from your specialized dealer.

You can make permanent settings for all products in programming mode (see Chapter 4 ‘Permanent settings in programming mode – Adjusting the product settings’).

2 Preparation

Espresso, coffee and other specialty coffees

Latte macchiato, cappuccino and other specialty coffees with m i l k

Ristretto, espresso, coffee and special coffee are all prepared following this model.

For a pot of coffee, you can choose the number of brewing operations (1–5 strokes) in programming mode.

Example:Proceed as follows to prepare one coffee. Precondition:The start screen is displayed.

T Place a cup under the dual spout. T Press the

Preparation starts. displayed. The preset amount of water for coffee flows into the cup. Preparation stops automatically. Your X8 is once more ready for use.

Your X8 prepares latte macchiato, cappuccino and other specialty coffees with milk at the touch of a button. There is no need to move the glass or cup.

Example:Proceed as follows to prepare one latte macchiato. Precondition:Milk is connected to the dual spout.

T Place a glass under the dual spout. T Press the

‘Latte macchiato’, the preset amounts of milk and milk foam

flow into the glass.

‘Coffee’ button.

‘Coffee’ and the coffee strength are

‘Latte macchiato’ button.

E There is a short interval while the hot milk separates from the

milk foam. This allows the typical layers of a latte macchiato to form.

Coffee preparation starts. The preset amount of water for espresso flows into the glass. Preparation stops automatically. Your X8 is once more ready for use.

To ensure that the milk system in the dual spout always works properly, you must clean it daily (see Chapter 5 ‘Maintenance – Cleaning the milk system’).

2 Preparation

Preparing two specialty coffees

Permanently setting the amount of water for the cup size

To prepare two specialty coffees / specialty coffees with milk, press the appropriate preparation button twice (within approximately 2 seconds).

Example:Proceed as follows to prepare two espressi. Precondition:The start screen is displayed.

T Place two cups under the coffee spout. T Press the

preparation.

‘2x Espresso’, the preset amount of water flows into the

cups. Preparation stops automatically. Your X8 is once more ready for use.

It is easy to permanently adjust the amount of water for all single products to the cup size. Adjust the amount once as shown in the following example. Every time you prepare a drink in the future, this amount will be dispensed.

Example:Proceed as follows to permanently set the amount of water for one coffee.

T Place a cup under the dual spout. T Press and hold the

Press button’

T Release the

Preparation starts and the coffee flows into the cup.

T Press any button except

coffee in the cup. Preparation stops. set amount of water for one coffee is permanently stored. Your X8 is once more ready for use.

‘Espresso’ button twice (within 2 seconds) to start

‘Coffee’ button until ‘Enough coffee?

appears.

‘Coffee’ button.

‘Cancel’ as soon as there is sufficient

‘Saved’ appears briefly on the display. The

E You can alter this setting at any time by repeating the above

procedure.

E You can also permanently set the amounts for all single

products in programming mode (see Chapter 4 ‘Permanent settings in programming mode – Adjusting the product settings’).

2 Preparation

Adjusting the grinder

NOTICE

You can adjust the grinder to suit the degree of roast of your coffee.

If you adjust the consistency of grind when the grinder is not operating, the grinder adjustment wheel could be damaged.

T Only adjust the consistency of grind when the grinder is

running.

The consistency of grind is correct if the coffee flows regularly from the coffee spout. In addition a fine, thick crema forms.

You can set the consistency of grind using the spanner provided.

Example:Proceed as follows to change the consistency of grind during the preparation of an espresso.

T Place a cup under the dual spout. T Open the cover behind the bean container. T Press the T Turn the grinder adjustment wheel to the desired position

while the grinder is running. The preset amount of water flows into the cup. Preparation stops automatically.

T Close the cover.

‘Espresso’ button to start preparation.

2 Preparation

Hot water

CAUTION

Your X8 allows you to prepare different variants of hot water:

‘Hot water’

‘Hot water for green tea’

There is a danger of scalding from hot water splashes.

T Avoid direct contact with the skin.

Example:Proceed as follows to prepare hot water for green tea. Precondition:The start screen is displayed.

T Place a cup under the hot-water spout.

‘Hot water for green tea’ can be found on page 2 of the start

screen.

T Press the

‘Hot water for green tea’, the preset amount of water flows

into the cup. Preparation stops automatically. Your X8 is once more ready for use.

‘Hot water for green tea’ button.

3 Daily operation

Filling the water tank

NOTICE

Switching on the machine

Daily maintenance of the machine and hygiene when handling coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily.

Milk, sparkling mineral water or other liquids can damage the water tank or the machine.

T Only fill the water tank with fresh, cold water.

You can lock the water tank cover with the spanner provided.

T Open the water tank cover. T Remove the water tank and rinse it with cold water. T Fill the water tank with fresh, cold water and reinsert the

tank.

T Close the water tank cover.

T Press the On/Off button Q to switch the X8 on.

‘Welcome to JURA’ ‘Machine is heating’ ‘Machine is rinsing’

automatically. The start screen is displayed. Your X8 is ready for use.

, the system is rinsed. The rinse stops

Daily maintenance

To ensure that you get many years of reliable service out of your X8 and to guarantee the optimum coffee quality, the machine requires daily maintenance.

T Pull out the drip tray. T Empty the coffee grounds container and the drip tray. Rinse

them both with warm water.

E Always empty the coffee grounds container when the machine

is switched on. This is the only way of resetting the coffee grounds counter.

T Rinse the insert for the drip tray with warm water. T Refit the coffee grounds container and the drip tray. T Rinse the water tank with clean water.

3 Daily operation

T Clean the milk system in the dual spout (see Chapter 5

‘Maintenance – Cleaning the milk system’).

T Remove the milk pipe and rinse it thoroughly under running

water.

T Dismantle and rinse the dual spout (see Chapter 5

‘Maintenance – Dismantling and rinsing the dual spout’).

T Wipe the surface of the machine with a clean, soft, damp

cloth (e.g. microfiber cloth).

You will find more information about caring for your X8 in programming mode under

information’

‘2/5’ / ‘Information’ (‘Maintenance

Regular maintenance

Switching off the machine

Carry out the following maintenance actions regularly or as required:

In the interests of hygiene, we recommend changing the milk

pipe and interchangeable milk spout on a regular basis (approximately every 3 months). Replacements are available from specialized dealers. Clean the inside of the water tank, e.g. with a brush. Further

information about the water tank is provided in these instructions for use (see Chapter 5 ‘Maintenance – Descaling the water tank’). Traces of milk and coffee may stick to the top and bottom of

the cup platform. If this happens, clean the cup platform.

When the X8 is switched off, the system is automatically rinsed if a specialty coffee has been prepared. If milk has been prepared, you will also be prompted to clean the milk system.

T Press the On/Off button Q.

E If milk has been prepared, you will be prompted to clean the

milk system (

the milk system now?’

process continues automatically.

If milk has been prepared but you have not started milk system cleaning, the milk system is rinsed first (

is being rinsed’ ‘Machine is rinsing’, the system rinses itself. The operation

stops automatically. Your X8 is switched off.

‘Clean the milk system’ / ‘Do you want to clean

). After 10 seconds the switch-off

‘Milk system

4 Permanent settings in programming mode

J WARNING

Program item

‘1/5’ ‘Clean’,

‘2/5’ ‘Rinse the milk system’,

‘3/5’ ‘Expert mode’

‘4/5’ ‘Choose language’

Sub-item Explanation

‘Descale’, ‘Clean the milk system’, ‘Filter’ (only if filter is fitted)

‘Rinse the coffee system’, ‘Information’

‘Customise cup fill volume’

‘One-off settings’

‘Lock/enable’

‘Units’

‘Rinse the milk system’

‘Switch off after’

‘Water hardness’

Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn.

T Use extreme care when handling hot liquid or steam. T Allow liquid to cool down before drinking. T In the event of scalding, rinse affected area with cold water an

T Keep children AWAY.

Press the navigate through the program items and permanently save the required settings using the multi-function buttons. The following settings can be made:

seek medical attention.

‘ Pc’ button to enter programming mode. You can

T Here you can start the required maintenance program or find out what maintenance actions are required.

T Select your settings for specialty coffees and hot water.

T Disable the function ‘Permanently setting the amount of water for the cup size’.

T Specify whether or not to allow one-off settings during preparation.

T Enable or disable individual products. T Select your language. T Select the unit for the amount of water. T Change the setting for the milk system rinsing. T Set the time after which the X8 should switch

off automatically. T Adjust the water hardness.

4 Permanent settings in programming mode

Program item

‘5/5’ ‘Product counter’,

Sub-item Explanation

‘Day counter’, ‘Maintenance counter’, ‘Version’ ‘Connect accessory’, ‘Disconnect accessories’ (Only

displayed if the JURA Smart Connect is being used.)

Adjusting the product settings

J WARNING

Product Coffee

strength

‘Ristretto’, ‘Espresso’ ‘Coffee’, ‘Special’ ‘Cappuccino’, ‘Caffè latte’, ‘Flat White’

10 levels Water: 0.5 oz – 2.5 oz

10 levels Water: 0.5oz–8.0oz

T Keep track of all products prepared and view the number of maintenance programs performed.

T Connect the X8 to a compatible accessory via Bluetooth or disconnect the connection again.

Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn.

T Use extreme care when handling hot liquid or steam. T Allow liquid to cool down before drinking. T In the event of scalding, rinse affected area with cold water an

seek medical attention.

T Keep children AWAY.

In the program item settings for all specialty coffees and hot water. The following permanent settings can be made:

Amount More settings

(15ml–80ml)

(25 ml – 240 ml)

(25 ml – 240 ml) Milk foam: 0sec.–120sec. Milk: 0sec.–120sec.

‘3/5’ / ‘Expert mode’ you can make individual

Temperature (normal, high), position Temperature (normal, high), position Milk and milk foam temperature, Temperature (normal, high), position

4 Permanent settings in programming mode

Product Coffee

Amount More settings

strength

‘Latte macchiato’ 10 levels Water: 0.5oz–8.0oz

(25 ml – 240 ml) Milk foam: 0sec.–120sec. Milk: 0sec.–120sec. Interval: 0sec.–60sec.

‘1 portion milk’ – Milk foam: 0sec.–120sec.

Milk: 0sec.–120sec.

‘Jug of coffee’ 10 levels Water: 25ml–240ml

Number of strokes (1–5; set number is displayed during

preparation)

‘Hot water’, ‘Hot water for

– Water: 0.5oz–15.0oz

(25 ml – 450 ml)

green tea’

E When preparing double products, the amounts set for the

single product are doubled. The temperature of the single product remains unchanged.

Permanent settings in programming mode always follow the same model.

Milk and milk foam temperature, Temperature (normal, high), position

Milk and milk foam temperature, position Temperature (normal, high), position

Temperature (low, normal, high), position

Example:Proceed as follows to change the coffee strength for one

coffee.

T Press the T Press the T Press the

‘Pc’ button. ‘T’ button several times until ‘3/5’ is displayed. ‘Expert mode’ button.

‘Expert mode’

E Next select the button of the product for which you would like

to make settings. No product is prepared at this point.

E To display more products, press the

T Press the

‘Coffee’ button.

‘T’ button (bottom right).

‘Coffee’

T Press the ‘Coffee strength’ button.

‘Coffee’ and the coffee strength is displayed.

4 Permanent settings in programming mode

T Press the ‘<’ or ‘>’ button to change the setting for the cof-

fee strength.

T Press the

‘Saved’ appears briefly on the display. ‘Coffee’

T Press the ‘’ button for around 2 seconds to exit

programming mode.

‘Save’ button.

Positioning products on the start screen

You can reposition the products on the start screen.

Example:Proceed as follows to replace of the start screen with

T Press the T Press the T Press the

‘Expert mode’

E Next select the button of the product you want to move. No

product is prepared at this point.

E To display more products, press the

T Press the

‘Ristretto’

T Press the ‘Position’ button.

‘Select position’

T Press the ‘Flat White’ button.

‘Replace product?’

T Press the ‘Yes’ button.

‘Saved’ appears briefly on the display. ‘Ristretto’

T Press the ‘’ button for around 2 seconds to exit

programming mode.

‘Ristretto’.

‘Pc’ button. ‘T’ button several times until ‘3/5’ is displayed. ‘Expert mode’ button.

‘Ristretto’ button.

‘Flat White’ on the first page

‘T’ button (bottom right).

4 Permanent settings in programming mode

Enable or disable one-off settings

Enable or disable setting of cup volume

In the program item ‘3/5’ / ‘One-off settings’ you can make the following setting:

‘Ac tiv e’: One-off settings can be made during preparation (e.g.

coffee strength or amount of water).

‘Inactive’: One-off settings cannot be made during

preparation. The product is prepared according to the settings in programming mode (

Example: Proceed as follows to disable one-off settings during preparation.

T Press the T Press the T Press the

‘One-off settings’

T Press the ‘Inactive’ button. T Press the

‘Saved’ appears briefly on the display. ‘3/5’

T Press the ‘’ button to exit programming mode.

In the program item the following setting:

‘Ac tiv e’: The function ‘Permanently setting the amount of

water for the cup size’ is activated. You can adjust the amount of water to the cup size by pressing and holding the relevant preparation button.

‘Inactive’: The function ‘Permanently setting the amount of

water for the cup size’ is deactivated. The amount of water cannot be adjusted to the cup size by pressing and holding the relevant preparation button.

‘Pc’ button. ‘T’ button several times until ‘3/5’ is displayed. ‘One-off settings’ button.

‘Save’ button.

‘3/5’ / ‘Customise cup fill volume’ you can make

‘3/5’ / ‘Expert mode’).

Example:Proceed as follows to disable the function ‘Permanently

setting the amount of water for the cup size’.

T Press the T Press the T Press the

‘Customise cup fill volume’

T Press the ‘Inactive’ button.

‘Pc’ button. ‘T’ button several times until ‘3/5’ is displayed. ‘Customise cup fill volume’ button.

4 Permanent settings in programming mode

T Press the ‘Save’ button.

‘Saved’ appears briefly on the display. ‘3/5’

T Press the ‘’ button to exit programming mode.

Enable and disable products

Automatic switch-off

In the program item each product individually.

Example:Proceed as follows to disable the preparation of

coffee’

T Press the T Press the T Press the

‘Lock/enable’

E The lock symbol beside the product name indicates whether

the product is enabled or disabled. If the lock is closed, the product is disabled.

T Press the

displayed.

T Press the

The lock is closed. Preparation of disabled.

T Press the

programming mode.

By instructing your X8 to automatically switch itself off, you can cut down your energy consumption. If this function is activated, your X8 switches off automatically after the preset time following the last action on the machine.

‘3/5’ / ‘Lock/enable’ you can enable or disable

‘Jug of

‘Pc’ button. ‘T’ button several times until ‘3/5’ is displayed. ‘Lock/enable’ button.

‘ >’ button until the product ‘Jug of coffee’ is

‘Jug of coffee’ button.

‘Jug of coffee’ is now

‘’ button for around 2 seconds to exit

You can set the automatic switch-off to 15minutes, 30minutes or 1–9hours.

T Press the T Press the T Press the

‘Switch off after’

T Press the ‘<’ or ‘>’ button to change the switch-off time.

‘Pc’ button. ‘T’ button several times until ‘4/5’ is displayed. ‘Switch off after’ button.

4 Permanent settings in programming mode

T Press the ‘Save’ button.

‘Saved’ appears briefly on the display. ‘4/5’

T Press the ‘’ button to exit programming mode.

Setting the water hardness

Milk system rinsing

The harder the water is, the more frequently the X8 needs to be descaled. It is therefore important to set the water hardness accurately.

The water hardness was set when the machine was first used. You can change this setting at any time.

The total water hardness can be adjusted on a continuous scale between 1°dH and 30°dH.

T Press the T Press the T Press the

‘Water hardness’

T Press the ‘<’ or ‘>’ button to change the setting for the

water hardness.

T Press the

‘Saved’ appears briefly on the display. ‘4/5’

T Press the ‘’ button to exit programming mode.

In the program item following settings:

‘Manual’: You are prompted to perform milk system rinsing

10minutes after preparation of a specialty coffee with milk.

‘Automatic’: The milk system rinsing is automatically initiated

10minutes after preparation of a specialty coffee with milk.

‘Pc’ button. ‘T’ button several times until ‘4/5’ is displayed. ‘Water hardness’ button.

‘Save’ button.

‘4/5’ / ‘Rinse the milk system’ you can make the

Example:Proceed as follows to set the milk system rinsing to be initiated automatically 10 minutes after the preparation.

T Press the T Press the T Press the

‘Rinse the milk system’

T Press the ‘Automatic’ button.

‘Pc’ button. ‘T’ button several times until ‘4/5’ is displayed. ‘Rinse the milk system’ button.

4 Permanent settings in programming mode

T Press the ‘Save’ button.

‘Saved’ appears briefly on the display. ‘4/5’

T Press the ‘’ button to exit programming mode.

Unit for amount of water

Language

Example:Proceed as follows to change the unit for the amount of

water from

Example:Proceed as follows to change the language from to

‘Deutsch’.

‘ml’ to ‘oz’.

T Press the T Press the T Press the

‘Units’

T Press the ‘oz’ button. T Press the

‘Saved’ appears briefly on the display. ‘4/5’

T Press the ‘’ button to exit programming mode.

T Press the T Press the T Press the

‘Choose language’

E To display more languages, press the ‘ T’ button (bottom

right).

T Press the button that corresponds to the language you want,

e.g.

‘Gespeichert’ appears briefly on the display. ‘4/5’

T Press the ‘’ button to exit programming mode.

‘Pc’ button. ‘T’ button several times until ‘4/5’ is displayed. ‘Units’ button.

‘Save’ button.

‘English’

‘Pc’ button. ‘T’ button several times until ‘4/5’ is displayed. ‘Choose language’ button.

‘Deutsch’.

4 Permanent settings in programming mode

Query counter readings and version

In the program item ‘5/5’ you can view the following information.

‘Product counter’: Number of prepared specialty coffees and

hot water

‘Day counter’: Number of prepared specialty coffees and hot

water. This counter can be reset to zero.

‘Maintenance counter’: Number of maintenance programs

performed (cleaning, descaling etc.)

‘Version’: Software version

Example:Proceed as follows to reset the day counter.

T Press the T Press the T Press the T Press the

‘Delete the day counter?’

T Press the ‘Yes’ button.

‘Saved’ appears briefly on the display. ‘5/5’

T Press the ‘’ button to exit programming mode.

‘Pc’ button. ‘T’ button several times until ‘5/5’ is displayed. ‘Day counter’ button. ‘’ button.

5 Maintenance

J WARNING

Use of maintenance products that are harmful to health and discharge of liquids during maintenance program. Harmful if swallowed. Irritating to eyes and skin.

T Keep children AWAY. T Keep children away from the machine while it is performing a

maintenance program.

T Avoid contact with skin and eyes. T Avoid generation of dust. Do not inhale dust. T When using do not eat or drink. T Keep maintenance products away from food, drink and

animal food.

T Keep container tightly closed and dry. Keep in a cool place.

Your X8 has the following integrated maintenance programs:

Rinsing the machine (‘2/5’ / ‘Rinse the coffee system’)

Rinsing the milk system in the dual spout (‘2/5’ / ‘Rinse the

milk system’

Cleaning the milk system in the dual spout (‘1/5’ / ‘Clean the

milk system’

Changing the filter (‘1/5’ / ‘Filter’) (only if filter is fitted)

Cleaning the machine (‘1/5’ / ‘Clean’)

Descaling the machine (‘1/5’ / ‘Descale’)

)

E Carr y out each maintenance program when you are prompted

to do so.

E In the interests of hygiene, you should clean the milk system

daily when you have been preparing milk.

E Press the

programs. When the bar is completely filled with red, your X8 will prompt you to perform the appropriate maintenance program.

‘ Pc’ button to view a list of the maintenance

5 Maintenance

Rinsing the machine

You can start coffee system rinsing manually at any time.

T Place a receptacle under the dual spout. T Press the T Press the

‘2/5’

T Press the ‘Rinse the coffee system’ button to start the rinse

operation.

‘Machine is rinsing’, water flows out of the dual spout. The

operation stops automatically.

‘Pc’ button. ‘T’ button.

Rinsing the milk system

After each milk preparation, the X8 prompts you to perform a milk system rinse.

Precondition:

T Place a receptacle under the dual spout. T Press the

‘Rinse the milk system’ is displayed.

‘Pc’ button.

‘Milk system is being rinsed’, water flows out of the dual

spout. The operation stops automatically.

5 Maintenance

Cleaning the milk system

J WARNING

To ensure that the milk system in the dual spout always works properly, you must clean it daily when you have been preparing milk.

Non-recommended cleaning agents will not optimally remove milk residues. This may cause the cappuccino frother to become blocked and fly off the machine. Discharge of hot steam.

T Use only original JURA milk system cleaner.

Harmful and irritating cleaning agent. Harmful if swallowed. Irritating to eyes and skin.

T Keep children AWAY. T Avoid contact with skin and eyes. T After contact with skin, wash immediately with plenty of

water. In case of skin irritation, seek medical advice.

T After eye contact, immediately flush eyes with plenty of water

and seek medical advice.

T If swallowed, rinse mouth immediately and drink large

quantities of water. Do not induce vomiting. Seek medical advice immediately and show label.

E JURA milk system cleaner is available from specialized dealers. E To clean the milk system, use the container supplied.

Precondition:The start screen is displayed.

T Press the

‘1/5’

T Press the ‘Clean the milk system’ button.

‘Clean the milk system’

T Press the ‘Start’ button. T Press the

‘Cleaning agent for milk system’

T Add a capful of milk system cleaner to the rear part of the

container.

T Press the

‘Connect the milk tube’

‘Pc’ button.

‘Next’ button.

5 Maintenance

T Place the container under the dual spout. T Remove the milk pipe from the milk container. T Connect the milk pipe to the container for milk system

cleaning.

E To connect the milk pipe to the container correctly, the pipe

must be fitted with a connector.

Dismantling and rinsing the dual spout

T Press the

‘Cleaning milk system’, the dual spout and the pipe are

cleaned. The operation stops automatically. Your X8 is once more ready for use.

The dual spout must be dismantled and rinsed daily if milk has been prepared to make sure it functions perfectly and also in the interests of hygiene.

T Remove the milk pipe and rinse it thoroughly under running

water.

T Pull the cover of the dual spout forwards and off.

‘Next’ button.

T Remove the milk system from the dual spout.

5 Maintenance

T Dismantle the milk system into its individual parts. T Rinse all the parts under running water. If there are severely

dried-on milk residues, firstly immerse the individual parts

in a solution of 8.5 oz (250 ml) cold water and 1 capful of JURA milk system cleaner. Then rinse the parts thoroughly.

T Reassemble the milk system.

T Fit the assembled individual par ts back in the dual spout and

press it firmly.

T Fit the cover of the dual spout.

T Connect the milk pipe to the dual spout.

5 Maintenance

Inserting the filter

Your X8 no longer has to be descaled if you are using the CLEARYL Pro Smart filter cartridge. If you did not insert the filter cartridge the first time you used the machine, you can do this now as follows.

T Remove the water tank and rinse it with cold water. T Open the filter holder. T Insert the filter cartridge into the water tank, exerting slight

pressure.

T Close the filter holder. It will click into place audibly. T Fill the water tank with fresh, cold water and reinsert the

tank.

E The machine automatically detects that you have just inserted

the filter cartridge.

‘Saved’ appears briefly on the display. ‘Filter is being rinsed’, Water flows directly into the drip tray.

Rinsing of the filter stops automatically.

‘Empty drip tray’

T Empty the drip tray and coffee grounds container and put

them back into the machine. Your X8 is once more ready for use.

E If the filter is active, this is indicated by a blue filter symbol at

the bottom of the display.

Changing the filter

E Once the filter cartridge stops working (depending on the

water hardness setting), the X8 will prompt you to change the filter.

E CLEARYL Pro Smart filter cartridges are available from

specialized dealers.

Precondition:The filter symbol at the bottom of the display lights up red.

T Remove and empty the water tank. T Open the filter holder and remove the old CLEARYL Pro

Smart filter cartridge.

5 Maintenance

T Insert a new CLEARYL Pro Smart filter cartridge into the

water tank, exerting slight pressure.

T Close the filter holder. It will click into place audibly. T Fill the water tank with fresh, cold water and reinsert the

tank.

‘Saved’ appears briefly on the display. The machine has

automatically detected that you have just changed the filter cartridge.

‘Filter is being rinsed’, Water flows directly into the drip tray.

Rinsing of the filter stops automatically.

‘Empty drip tray’

T Empty the drip tray and coffee grounds container and put

them back into the machine. Your X8 is once more ready for use.

E If the filter is active, this is indicated by a blue filter symbol at

the bottom of the display.

Cleaning the machine

J WARNING

After 180preparations or 80switch-on rinses, the X8 will prompt you to clean it.

Non-recommended (e.g. liquid) cleaning agents may contain substances that could damage the machine or leave residues.

T Use only original JURA cleaning tablets. These are specially

formulated for your machine.

Harmful and irritating cleaning agent. Harmful if swallowed. Irritating to eyes and skin.

T Keep children AWAY. T Avoid contact with skin and eyes. T Avoid generation of dust. Do not inhale dust. T After contact with skin, wash immediately with plenty of

water. In case of skin irritation, seek medical advice.

T After eye contact, immediately flush eyes with plenty of water

and seek medical advice.

T If swallowed, rinse mouth immediately and drink large

quantities of water. Do not induce vomiting. Seek medical advice immediately and show label.

5 Maintenance

E The cleaning program lasts approximately 20 minutes. E Do not interrupt the cleaning program. The quality of cleaning

will be impaired if you do so.

E JURA cleaning tablets are available from specialized dealers.

Precondition:

T Press the

T Press the ‘Start’ button. T Press the

T Empty the drip tray and coffee grounds container and put

T Place a receptacle under the dual spout. T Press the

T Open the cover behind the bean container.

T Insert a JURA cleaning tablet into the filler funnel. T Close the cover. T Press the

T Empty the drip tray and coffee grounds container and put

‘Clean machine’ is displayed.

‘Pc’ button.

‘Clean’

‘Next’ button.

‘Empty coffee grounds container’

them back into the machine.

‘Clean’

‘Next’ button. ‘Machine is being cleaned’, water flows out of the dual spout.

The operation is interrupted,

‘Next’ button. ‘Machine is being cleaned’, water flows out of the dual spout

repeatedly. The operation stops automatically.

‘Empty coffee grounds container’

them back into the machine. Cleaning is now complete.

‘Add cleaning tablet’.

Descaling the machine

The X8 builds up deposits of limescale over time and automatically prompts you to descale it when necessary. The degree of calcification depends on the hardness of your water.

E If you are using a CLEARYL Pro Smart filter cartridge, you will

not be prompted to descale.

5 Maintenance

J WARNING

J WARNING J WARNING

NOTICE

Non-recommended descaling agents (e.g. vinegar) may contain substances that could damage the machine or leave residues.

T Use only original JURA descaling tablets. These are specially

formulated for your machine.

Harmful and irritating descaling agent. Harmful if swallowed. Irritating to eyes and skin.

T Keep children AWAY. T Avoid contact with skin and eyes. T Avoid generation of dust. Do not inhale dust. T After contact with skin, wash immediately with plenty of

water. In case of skin irritation, seek medical advice.

T After eye contact, immediately flush eyes with plenty of water.

Remove contact lenses. Seek medical advice.

T If swallowed, rinse mouth immediately and drink large

quantities of water. Do not induce vomiting. Seek medical advice immediately and show label.

If the descaling operation is interrupted, there may be damage to the machine.

T Allow the descaling program to run to the end.

E The descaling program lasts approximately 45minutes. E JURA descaling tablets are available from specialized dealers. E If the descaling agent comes into contact with sensitive

surfaces (e.g. marble), damage cannot be ruled out. Clean up any splashes immediately.

Precondition:

T Press the

‘Decalcify machine’ is displayed.

‘Pc’ button. ‘Descale’

T Press the ‘Start’ button. T Press the

‘Next’ button. ‘Empty drip tray’

T Empty the drip tray and coffee grounds container and put

them back into the machine.

‘Agent in tank’

T Remove and empty the water tank.

5 Maintenance

T Completely dissolve 3JURA descaling tablets in a receptacle

holding 20 oz (600 ml) of water. This may take several minutes.

T Pour the solution into the empty water tank and insert it

into the machine.

T Place one receptacle under the dual spout and another

under the hot-water spout.

T Press the

‘Next’ button. ‘Machine is being descaled’, water flows repeatedly out of

the dual spout and the hot-water spout. The operation is interrupted,

‘Empty drip tray’.

T Empty the drip tray and coffee grounds container and put

them back into the machine.

‘Fill water tank’

T Remove the water tank and rinse it thoroughly. T Fill the water tank with fresh, cold water and reinsert the

tank.

T Place one receptacle under the dual spout and another

under the hot-water spout.

T Press the

‘Next’ button. ‘Machine is being descaled’, the descaling operation is

continued. The operation is interrupted,

‘Empty drip tray’.

T Empty the drip tray and coffee grounds container and put

them back into the machine. Descaling is now complete.

E If the descaling operation stops unexpectedly, rinse the water

tank thoroughly.

5 Maintenance

Cleaning the bean container

Descaling the water tank

Coffee beans may be covered with a slight oil film which remains on the walls of the bean container and on the aroma preservation cover. These traces may negatively affect the coffee result. For this reason, clean the bean container and the aroma preservation cover from time to time.

The bean container cover is lockable (spanner supplied as standard).

Precondition:

T Switch the machine off with the On/Off button Q. T Remove the aroma preservation cover. T Clean the bean container with a soft, dry cloth. T Fill the bean container with coffee beans and close the

Limescale deposits may form in the water tank. To ensure correct function of the machine, descale the water tank from time to time.

T Remove the water tank. T If you use a CLEARYL Pro Smart filter cartridge, remove this. T Completely fill the water tank and dissolve 3 JURA descaling

T Leave the water tank with the descaling solution for several

T Empty the water tank and rinse it thoroughly. T If you use a CLEARYL Pro Smart filter cartridge, insert this

T Fill the water tank with fresh, cold water and reinsert the

‘Fill bean container’ is displayed.

aroma preservation cover.

tablets in it.

hours (e.g. overnight).

again.

tank.

6 Display messages

Message Cause/Result Action

‘Fill water tank’ The water tank is empty. You

cannot prepare any products.

‘Empty coffee grounds container’ ‘Empty drip tray’

‘Drip tray not fitted’ The drip tray is not inserted

‘Fill bean container’ The bean container is empty. You

‘Rinse the milk system’

The filter symbol at the bottom of the display lights up red.

‘Clean machine’ The X8 is prompting you to clean

‘Decalcify machine’ The X8 is prompting you to

‘Too hot’ The system is too hot to start a

The coffee grounds container is full. / The drip tray is full. You

cannot prepare any products.

correctly or is not inserted at all. You cannot prepare any products.

cannot prepare any specialty coffees, but you can prepare hot water and milk.

The X8 requests a milk system rinse.

The filter cartridge no longer works.

it.

descale it.

maintenance program.

T Fill the water tank (see Chapter 3 ‘Daily operation – Filling the water tank’).

T Empty the coffee grounds container and the drip tray (see Chapter 3 ‘Daily operation – Daily maintenance’).

T Fit the drip tray.

T Fill the bean container (see

Chapter 1 ‘Preparing and using for the first time – Filling the bean container’)

T Perform milk system rinsing (see Chapter 5 ‘Maintenance – Rinsing the milk system’).

T Replace the CLEARYL Pro Smart filter cartridge (see Chapter 5 ‘Maintenance – Changing the filter’).

T Perform cleaning (see Chapter 5 ‘Maintenance – Cleaning the machine’).

T Perform descaling (see Chapter 5 ‘Maintenance – Descaling the machine ’).

T Wait for several minutes until the system has cooled or prepare a specialty coffee or hot water.

7 Troubleshooting

Problem Cause/Result Action

Insufficient foam is produced when the milk is frothed or milk sprays from the dual spout.

Coffee only comes out in drips when it is being prepared.

‘Fill water tank’ is not

displayed although the water tank is empty.

Grinder is making a very loud noise.

‘ERROR2’ or ‘ERROR5’ is

displayed.

Other

‘ERROR’ messages

are displayed.

The dual spout is dirty.

The coffee is ground too finely and obstructs the system.

There is a lot of limescale in the water tank.

There are foreign objects in the grinder.

If the machine has been exposed to the cold for a long period of time, heating may be disabled for safety reasons.

–

T Clean the milk system in the dual spout (see Chapter 5 ‘Maintenance – Cleaning the milk system’). TDismantle and rinse the dual spout (see Chapter 5 ‘Maintenance – Dismantling and rinsing the dual spout’).

T Set the grinder to a coarser setting (see Chapter 2 ‘Preparation – Adjusting the grinder’).

T Descale the water tank (see Chapter 5 ‘Maintenance – Descaling the water tank’).

T Contact customer support in your country (see Chapter 11 ‘JURA contact details/ Legal information’).

T Warm the machine at room temperature.

T Switch the X8 off with the On/Off button Q. Contact customer support in your country (see Chapter 11 ‘JURA contact details/ Legal information’).

7 Troubleshooting

E If you were unable to solve the problem, contact customer

support in your country (see Chapter 11 ‘JURA contact details/ Legal information’).

8 Transport and environmentally friendly disposal

Transport/ Emptying the system

Disposal

Keep the packaging for your X8. It should be used to protect the machine during transport.

In order to protect the X8 from frost during transport, the system must be emptied.

T Place one receptacle under the dual spout and another

under the hot-water spout.

T Press the T Press the

‘2/5’

T Press the ‘Rinse the milk system’ button.

‘Milk system is being rinsed’, water flows out of the dual

spout. The operation stops automatically.

T Press the

‘Hot water’, water flows out of the hot-water spout.

T Remove and empty the water tank.

Water will flow out of the hot-water spout until the system is empty.

‘Fill water tank’

T Press the On/Off button Q.

Your X8 is switched off.

Please dispose of old machines in an environmentally neutral way.

‘Pc’ button.

‘T’ button.

‘Hot water’ button.

9 Technical data

Voltage 120V~, 60Hz Power 1450W Ambient conditions Humidity max. 80%

Ambient temperature

50–95 °F (10–35 °C) Sound pressure level Conformity mark

Pump pressure static, max. 15bar Holding capacity of water tank (without filter) Holding capacity of bean container Holding capacity of coffee grounds container Cord length approx. 47 in.

Weight approx. 30.9lb

Dimensions (W×H×D) approx. 14.7 × 18.5 × 18.2in.

≤ 70 dB

170 oz

(5l)

17.6 oz

(500g)

max. 40 portions

(approx. 1.2 m)

(approx. 14kg)

(approx. 37.3 × 47 × 46.1cm)

Directives

The machine complies with the following directives:

Standard UL 1082

Canadian Standard CSA C22.2 No. 64

10 Index

Addresses 48 Adjusting the product settings 23 Aroma preservation cover

Bean container with aroma preservation cover 8

Automatic switch-off 27

Bean container

Bean container with aroma preservation cover 8 Cleaning 41

Filling 10 Bluetooth 14 Bus bar

Technical data 45 Button

On/Off button 8

Caffè latte 16 Cappuccino 16 Cappuccino frother cleaning

Cleaning the milk system 33 Cappuccino frother rinsing

Rinsing the milk system 32 Cleaning

Bean container 41

Machine 37 CLEARYL Pro Smart filter cartridge

Change 36

Insert 36 Coffee 16 Coffee grounds container 8 Connecting an accessory 14 Consistency of grind

Adjusting the grinder 18

Grinder adjustment wheel 8 Contact details 48 Cover 8

Water tank 8 Cup platform 8 Customer support 48

Daily maintenance 20 Day counter 30 Descaling

Machine 38

Water tank 41 Disable

Products 27 Display 9 Display messages 42 Disposal 44

Double product 17 Drip tray 8

Insert 8

Dual spout

Dismantling and cleaning 34 Height-adjustable dual spout 8

Emptying the system 44 Enable

Products 27

Errors

Troubleshooting 43

Espresso 16

Filler funnel

Filler funnel for cleaning tablet 8

Filling

Bean container 10 Water tank 20

Filter

Change 36 Insert 36

First-time use 11

With filter cartridge activation 12 Without filter cartridge activation 13

Flat white 16

Green tea 19 Grinder adjustment wheel 8

Homepage 10 Hotline 48 Hot water 19 Hot-water spout 8

Important safeguards

Safety 4 Insert for drip tray 8 Internet 10

JURA

Contact details 48

Internet 10

Language 29 Latte macchiato 16

Machine

Cleaning 37

Daily maintenance 20

Descaling 38

Regular maintenance 21

Rinsing 32

Setting up 10

Switching off 21

10 Index

Switching on 20

Maintenance 31

Daily maintenance 20

Regular maintenance 21 Maintenance counter 30 Messages, display 42 Milk

Connecting milk 14 Milk system

Cleaning 33

Rinsing 32 Milk system rinsing 28

Number

Maintenance programs 30

Preparations 30

Permanently setting the water for the cup

size 17

Permanent settings in programming mode

22 Positioning products 25 Position of products

Change 25 Pot of coffee 16 Power cord 8 Preparation 15, 16

Caffè latte 16

Cappuccino 16

Coffee 16

Espresso 16

Flat white 16

Green tea 19

Hot water 19

Latte macchiato 16

Pot of coffee 16

Ristretto 16

Special coffee 16

Two specialty coffees 17 Problems

Troubleshooting 43 Product counter 30 Products

Disable 27

Enable 27 Product settings

Adjusting 23 Programming mode 22

Automatic switch-off 27

Counter readings and version 30

Enable or disable setting of cup volume

Language 29

Milk system rinsing 28

One-off settings 26

Positioning products on the start screen 25 Setting the water hardness 28 Unit for amount of water 29

Regular maintenance 21 Rinsing

Machine 32

Ristretto 16

Safety

Important safeguards 4 Service socket 9 Settings

Permanent settings in programming

mode 22 Setting up

Setting up the machine 10 Short operating instructions 10 Smart Connect 9 Special coffee 16 Spout

Height-adjustable dual spout 8

Hot-water spout 8 Switching off 21 Switching on 20 Switch-off

Automatic switch-off 27 Symbol description 3

Technical data 45 Tel 48 Transport 44 Troubleshooting 43 Two products 17

Unit for amount of water 29 Use, First-time 11

Version 30

Water hardness

Determining the water hardness 10

Setting the water hardness 28 Water tank 8

Descaling 41

Filling 20 Website 10

J73476/X8/US-en/201803

11 JURA contact details/ Legal information

JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Switzerland

USA: JURA Inc.

Customer Service

Phone E-Mail

Opening Hours (EST) Mon – Thu 9 am – 9 pm,

Distributor Address

Phone Fax

Internet www.us.jura.com www.ca.jura.com

Technical changes

1-800-220-5701 info@us.jura.com

Fri 9 am – 8 pm, Sat 9 am – 5 pm

20 Craig Road Montvale, NJ 07645 001 (201) 767-3999 001 (201) 767-9684

@ You will find additional contact details for your country at

www.jura.com.

We reserve the right to make technical changes. The diagrams used in these instructions for use are for illustration purposes only and do not represent the original colors of the machine. Some details of your JURA may vary.

Canada: FAEMA

1-(855)-544-8600 info@juracanada.ca

115 Matheson Boulevard East Mississauga, Ontario, L4Z 1X8 1-(905)-501-8600

Feedback

Your opinion is important to us! Use the contact details at www.us.jura.com.

The instructions for use contain information which is protected by copyright. It is not permitted to photocopy these instructions for use or translate them into another language without the prior written consent of JURA Elektroapparate AG.

Jura X8 Instructions for Use

Specifications and Main Features

Frequently Asked Questions

User Manual