Jura S8 EA operation manual

S8/S80 Instructions for Use

Table of contents

Your S8/S80

Control elements 4
Important information 6

Proper use ......................................................................................................................................................6

For your safety ............................................................................................................................................... 6

1 Preparing and using for the first time 10

JURA on the Internet ....................................................................................................................................10

Operation with touchscreen display .........................................................................................................10

Setting up the machine ..............................................................................................................................10

Filling the bean container ............................................................................................................................11

Determining the water hardness ...............................................................................................................11

First-time use .................................................................................................................................................11

Connecting milk ........................................................................................................................................... 13

Connect accessory (with wireless connection) ....................................................................................... 14

2 Preparation 15

Ways of preparing a beverage ...................................................................................................................15

Ristretto, espresso and coffee ....................................................................................................................16

Two ristretti, two espressi and two coffees .............................................................................................17

Latte macchiato, cappuccino and other speciality coffees with milk .................................................17

Warm milk and milk foam ..........................................................................................................................18

Ground coffee ...............................................................................................................................................18

Adjusting the grinder ..................................................................................................................................19

Hot water ......................................................................................................................................................20

3 Daily operation 21

Filling the water tank ...................................................................................................................................21

Switching on the machine ..........................................................................................................................21

Daily maintenance .......................................................................................................................................21

Regular maintenance .................................................................................................................................22

Switching off the machine .........................................................................................................................23

4 Permanent settings in programming mode 24

Product settings .......................................................................................................................................... 25

Automatic switch-off ..................................................................................................................................26

Energy-saving mode ..................................................................................................................................27

Operating instructions ............................................................................................................................... 28

Restore factory settings ............................................................................................................................. 28

Unit for amount of water ...........................................................................................................................29

Display brightness .......................................................................................................................................29

Setting the water hardness .......................................................................................................................30

Language ...................................................................................................................................................... 30

Querying information ................................................................................................................................. 31

2

Table of contents

5 Maintenance 32

Rinsing the machine ................................................................................................................................... 32

Automatic milk system rinsing ................................................................................................................. 32

Cleaning the milk system .......................................................................................................................... 33

Dismantling and rinsing the professional fine foam frother ...............................................................34

Inserting the filter .......................................................................................................................................35

Changing the filter ...................................................................................................................................... 35

Cleaning the machine ................................................................................................................................36

Descaling the machine ..............................................................................................................................37

Cleaning the bean container .....................................................................................................................39

Descaling the water tank ...........................................................................................................................40

6 Display messages 41
7 Troubleshooting 42
8 Transport and environmentally friendly disposal 43

Transport/ Emptying the system .............................................................................................................43

Disposal .........................................................................................................................................................43

9 Technical data 44
10 Index 45
11 JURA contact details/ Legal information 48

Symbol description

Warnings

J WARNING

J CAUTION

CAUTION CAUTION draws your attention to potential damage to the machine.

Symbols used

T

E

‘Coffee’ Display

Always take note of any information marked with the words CAUTION or
WARNING and a warning sign. The signal word WARNING draws your attention
to potential serious injury, and the signal word CAUTION to potential minor
injury.

Prompt to take action. This symbol means that you are being prompted to perform
some action.

Information and tips to make it even easier to use your S8/S80.

3

Control elements

9

8

3

5

10

7

6

4

2

1

Control elements

1 Bean container with aroma preservation

cover
2 Water tank cover
3 Water tank
4 Plug-in mains cable

(back of the machine)
5 Coffee grounds container
6 Drip tray

4

7 Touchscreen display
8 Milk system with professional fine foam

frother
9 Height-adjustable coffee spout
10 Cup grille

Control elements

3

1

2

4

5

1 Filler funnel cover
2 Filler funnel for ground coffee

3 Cover cap for grinder adjustment switch
4 Grinder adjustment switch
5 On/Off button Q

Service socket for optional JURA Smart Connect

Accessories

Container for milk system
cleaning

Measuring spoon for ground
coffee

Hot-water nozzle

6

5

Important information

Important information

Proper use

For your safety

J

The machine is designed and intended for private
domestic use. It should only be used for coffee
preparation and to heat milk and water. Use for
any other purpose will be deemed improper. JURA
Elektroapparate AG cannot accept any responsi­bility for the consequences of improper use.

Before using the machine read these instructions
for use thoroughly and completely and comply
with the instructions they contain. A warranty ser­vice is not applicable for damage or defects caused
by non-compliance with the instructions for use.
Keep these instructions for use close to the machine
and pass them on to the next user.

Please carefully read and observe the important
safety information set out below.

To avoid danger of potentially fatal electric shock:

Never use a machine which is damaged or has

U

a defective mains cable.
In the event of signs of damage, for example if

U

there is a smell of burning, unplug the machine
immediately from the mains supply and con­tact JURA service.
If the mains cable of this machine is damaged

U

it must be replaced with a special mains cable,
which is available directly from JURA or from
authorised JURA service centres.
Make sure that the S8/S80 and the mains cable

U

are not located close to hot surfaces.
Be careful to ensure that the mains cable is not

U

trapped and does not rub against sharp edges.

6

Important information

Never open and repair the machine yourself.

U

Do not modify the machine in any way that is
not described in these instructions for use. The
machine contains live parts. If opened, there is
a danger of potentially fatal injury. Repairs
may only be carried out by authorised JURA
service centres, using original spare parts and
accessories.
To completely and safely disconnect the

U

machine from the power supply, first switch
off the S8/S80 using the On/Off button Q.
Only then should you remove the mains plug
from the power socket.

There is a risk of scalds or burns on the spouts and
milk system:

Place the machine out of the reach of children.

U

Do not touch any hot parts. Use the handles

U

provided.
Be careful to ensure that the milk system is

U

correctly installed and clean. If incorrectly fit­ted or if it becomes blocked, the milk system
or its parts might come off. There is a danger
of parts being swallowed.

A defective machine is not safe and could cause
injury or fire. To avoid damage and any associated
risk of injury or fire:

Never allow the mains cable to loosely hang

U

down. The mains cable could pose a tripping
hazard or become damaged.
Protect the S8/S80 from environmental influ-

U

ences such as rain, frost and direct sunlight.
Do not immerse the S8/S80, mains cable or

U

connections in water.

7

Important information

Do not put the S8/S80 or any individual parts

U

in the dishwasher.
Before cleaning, switch the S8/S80 off with the

U

On/Off button. Always wipe the S8/S80 with a
damp cloth rather than a wet one, and protect
it from prolonged exposure to water splash.
Only connect the machine to the mains volt-

U

age in accordance with the information on the
rating plate. The rating plate is located on the
underside of your S8/S80. Further technical
data is provided in these instructions for use
(see Chapter 9 ‘Technical data’).
Connect the S8/S80 directly to a domestic

U

power socket. Using multi-socket adapters or
extension cords may cause overheating.
Please only use original JURA maintenance

U

products. Use of products that are not explic­itly recommended by JURA could damage the
machine.
Do not use alkaline cleaning agents when

U

cleaning, use a soft cloth and a mild detergent.
Do not use any coffee beans treated with addi-

U

tives or caramelised coffee beans.
Only fill the water tank with fresh, cold water.

U

Switch the machine off with the On/Off button Q

U

if you are going to be absent for a longer
period of time and remove the mains plug
from the power socket.
Children may not clean or service the machine

U

unless supervised by a responsible person.
Do not allow children to play with the machine.

U

Keep children under the age of 8 away from

U

the machine, or supervise them constantly.

8

Important information

Children aged 8 and over may only operate

U

the machine without supervision if they have
been instructed in how to use it safely. Chil­dren must be able to recognise and under­stand the potential dangers arising from incor­rect use.

People, including children, who

do not have the physical, sensory or mental

U

capabilities to use the machine safely or
are inexperienced or lack knowledge in how

U

to use the machine safely
must be supervised by a responsible person when
using it, or must be instructed in how to use it cor­rectly.

Safety when handling the CLARIS Smart filter
cartridge:

Filter cartridges should be kept out of the

U

reach of children.

Store filter cartridges in a dry place in the

U

sealed packaging.

Protect cartridges from heat and direct

U

sunlight.

Do not use damaged filter cartridges.

U

Do not open filter cartridges.

U

The CLARIS Smart filter cartridge communi-

U

cates with your S8/S80 via RFID technology

(frequency band 13.56 MHz). This wireless con-

nection is only used for a maximum of 3 sec.

during preparation. In this case, the maximum

transmission power is below 1 mW.

9

1 Preparing and using for the first time

1 Preparing and using for the first time

JURA on the Internet

Operation with
touchscreen display

>>

>>

>>

>>

Visit us on the Internet. You can download short operating instruc­tions for your machine from the JURA website (jura.com). You will

also find interesting and up-to-date information on your S8/S80 and
on every aspect of coffee.

If you need assistance with using your machine, you can find this at
jura.com/service.

Your S8/S80 features a touchscreen display. There are two ways of
operating the touch display:

Tou ch

U

Touch the display with your finger, for example to start coffee

preparation or undertake various settings in programming

mode.

Slide

U

Move your finger across the display from left to right or from

top to bottom (or vice versa). For example, you can select one

of the speciality coffees in the product selector view or switch

between programme items in programming mode.

Setting up the machine

10

When setting up your S8/S80, please note the following:

Place the S8/S80 on a horizontal surface that is not sensitive

U

to water.

Choose a spot for your S8/S80 which protects the machine

U

against overheating. Ensure that the ventilation slots are not

covered.

Filling the bean container

1 Preparing and using for the first time

CAUTION

Determining the water
hardness

Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.

T Only use roasted, untreated coffee beans to fill the bean con-

tainer.

T Remove the aroma preservation cover.

T Remove any dirt or foreign objects from inside the bean

container.

T Fill the bean container with coffee beans and close the

aroma preservation cover.

When you use the machine for the first time, you must set the water
hardness. If you do not know the hardness of your water, you can
find this out first. Use the Aquadur® test strips supplied with the
machine.

T Hold the test strip briefly (for 1second) under flowing water.

Shake off the water.

T Wait for about 1minute.

T You will then be able to read the degree of water hardness

from the discolouration of the Aquadur® test strip and the
description on the packaging.

First-time use

J

WARNING

CAUTION

If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.

T Never use a machine which is damaged or has a defective

mains cable.

Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.

T Only fill the water tank with fresh, cold water.

11

1 Preparing and using for the first time

Precondition:The bean container has been filled.

T Connect the mains cable to the machine.

T Insert the mains plug into a power socket.

T Press the On/Off button Q to switch the S8/S80 on.

‘Sprachauswahl’ / ‘Deutsch’

E To display more languages, move your finger either down-

wards or upwards in the selection list until the desired

language comes into focus (e.g. ‘English’).

T Touch ‘Save’.

‘Saved’ appears briefly on the display to confirm the setting.
‘Water hardness’

E If you do not know the hardness of your water, you must find

this out first (see Chapter 1 ‘Preparing and using for the first

time – Determining the water hardness’).

T Move your finger across the display to change the water

hardness setting, e.g. to ‘25°dH’.

T Touch ‘Save’.

‘Saved’ appears briefly on the display.
‘Insert filter’

T Place one receptacle under the coffee spout and another

under the fine foam frother.

T Remove the water tank and rinse it with cold water.

T Fit the filter cartridge extension supplied on top of the

CLARIS filter cartridge Smart.

12

T Insert the filter cartridge with its extension into the water

tank.

T Turn the filter cartridge clockwise until it audibly clicks into

place.

T Fill the water tank with fresh, cold water and reinsert the

tank.

E The machine automatically detects that you have just inserted

the filter cartridge.

‘Filter operation’ / ‘Saved’

1 Preparing and using for the first time

‘Filter is being rinsed’, the filter is rinsed. Water flows out of

the fine foam frother.

E The water may be slightly discoloured. This is not harmful to

health and does not affect the taste.

‘System is filling’
‘Empty drip tray’

T Empty the drip tray and put it back into the machine.

T Place a receptacle under the coffee spout.

‘Machine is heating’
‘Machine is rinsing’, the system is rinsed. The rinse stops

automatically. The start screen is displayed. Your S8/S80 is
ready for use.

E If the filter is active, this is indicated by a blue filter symbol at

the top of the display.

The CLARIS Smart filter cartridge communicates with your S8/S80
via RFID technology (frequency band 13.56 MHz). This wireless con­nection is only used for a maximum of 3 sec. during preparation. In
this case, the maximum transmission power is below 1 mW.

Connecting milk

Your S8/S80 creates fine, creamy, feather-light milk foam with a per­fect consistency. The most important requirement for frothing milk
is a milk temperature of 4–8°C. We would therefore recommend
using a milk cooler or a milk container.

T Remove the protective cover from the milk system.

T Connect the milk pipe to the milk system.

T Connect the other end of the milk pipe to a milk container

or a milk cooler.

13

1 Preparing and using for the first time

Connect accessory (with
wireless connection)

You have the option of connecting your S8/S80 wirelessly to a com­patible accessory (e.g. the Cool Control Wireless milk cooler). To do
this, the receiver of the Cool Control or the JURA Smart Connect
must be plugged into the service socket.

A frequency band of 2.4 GHz is used for this wireless connection. In
this case, the maximum transmission power is below 1 mW.

Precondition:The start screen is displayed.

T Touch ‘P’.

‘Machine settings’

T Touch ‘Machine settings’.

‘Switch off after’

T Move your finger across the display until ‘Connect acces-

sory’ is displayed in the centre.

T Touch ‘Connect accessory’.

‘Connect accessory’

T Now follow the instructions on the display to connect the

accessory to the S8/S80.

14

2 Preparation

2 Preparation

Basic information about preparing drinks:

During the grinding operation you can change the coffee

U

strength of single products. To do this, move your finger

across the display.

During preparation you can change the preset amounts (e.g.

U

amount of water or milk foam). To do this, move your finger

across the display.

You can stop preparation at any time. To do this, touch

U

‘Cancel’.

Coffee tastes best served hot. A cold porcelain cup cools the bever­age – and impairs the taste. We therefore recommend prewarming
the cups. The full coffee aroma can develop only in prewarmed cups.
You can purchase a JURA cup warmer from your specialised dealer.

You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Adjusting the product settings’).

Ways of preparing a
beverage

The S8/S80 offers various ways of preparing a speciality coffee, milk
or hot water.

Preparation using the start screen: Simply touch the desired prod­uct. The following products are displayed as standard on the start
screen:

‘Espresso’ ‘Coffee’ ‘2x Coffee’ ‘Hot water’
‘Cappuccino’ ‘Latte macchiato’ ‘Flat White’ ‘Milk foam’

Preparation using the product selector view: Only some of the
products you can prepare are shown on the start screen. As soon as
you touch the product selector symbol in the top right, more prod­ucts are displayed in a product selector view.

15

2 Preparation

Move your finger across the display to bring the desired product into
focus. Touch the product to start preparation. The following addi­tional products are shown in the product selector view:

‘Milk’

U

‘Caffè latte’

U

‘Hot water for green tea’

U

‘2x Ristretto’

U

‘2x Espresso’

U

‘Ristretto’

U

‘Macchiato’

U

E The product selector view disappears automatically after

10seconds if no preparation is started.

E The last product selected always appears first in the product

selector view.

E You can move any of the standard products programmed in

your S8/S80 to your preferred position on the start screen and

make it one of your favourites. You can duplicate and person-

alise your favourite speciality coffees by giving them a new

product name and individual settings (e.g. amount and coffee

strength) (see Chapter 4 ‘Permanent settings in programming

mode – Adjusting the product settings’). Please note that the

descriptions provided in the following sections always refer to

the default settings.

Ristretto, espresso and
coffee

16

Example:Proceed as follows to prepare one coffee.
Precondition:The start screen is displayed.

T Place a cup under the coffee spout.

T Touch ‘Coffee’.

Preparation starts. The preset amount of water for coffee
flows into the cup.
Preparation stops automatically. The start screen is dis­played.

2 Preparation

Two ristretti, two
espressi and two coffees

Latte macchiato,
cappuccino and other
speciality coffees with
milk

Example:Proceed as follows to prepare two ristretti (using product

selector view).
Precondition:The start screen is displayed.

T Place two cups under the coffee spout.

T Touch the product selector symbol (top right) to go to the

product selector view.

T Move your finger across the display until ‘2x Ristretto’ is

displayed in the centre.

T Touch ‘2x Ristretto’ to start preparation.

Preparation starts. The preset amount of water for coffee
flows into the cups. Preparation stops automatically. Your
S8/S80 is once more ready for use.

Your S8/S80 prepares latte macchiato, cappuccino and other speci­ality coffees with milk at the touch of a button. There is no need to
move the glass or cup.

Example:Proceed as follows to prepare one latte macchiato.
Precondition:The start screen is displayed. Milk is connected to the

fine foam frother.

T Place a glass under the fine foam frother.

T Set the selector switch for the professional fine foam frother

to the Milk Foam position (see image).

T Touch ‘Latte macchiato’.

‘Latte macchiato’ appears and the preset amount of milk

foam flows into the glass.

E There is a short interval while the hot milk separates from the

milk foam. This allows the typical layers of a latte macchiato

to form.

Coffee preparation starts. The preset amount of water for
espresso flows into the glass. Preparation stops automati­cally. Your S8/S80 is once more ready for use.

17

2 Preparation

E 15 minutes after preparation, the fine foam frother is automat-

ically rinsed (see Chapter 5 ‘Maintenance – Automatic milk

system rinsing’). Therefore always place a receptacle under the

fine foam frother after preparing milk.

To ensure that the fine foam frother always works properly, you
must clean it daily when you have been preparing milk (see
Chapter 5 ‘Maintenance – Cleaning the milk system’).

Warm milk and milk
foam

Example:Proceed as follows to prepare hot milk.
Precondition:The start screen is displayed. Milk is connected to the

milk system.

T Place a cup under the fine foam frother.

T Set the selector switch for the professional fine foam frother

to the Milk position (see image).

E If you wish to prepare milk foam, set the selector switch to the

Milk Foam position (selector switch in vertical position).

T Touch ‘Milk foam’.

The milk foam is prepared. The preset amount of milk flows
into the cup.
Preparation stops automatically. Your S8/S80 is once more
ready for use.

To ensure that the fine foam frother always works properly, you
must clean it daily when you have been preparing milk (see
Chapter 5 ‘Maintenance – Cleaning the milk system’).

Ground coffee

18

You can choose to use a second coffee variety, for example decaf­feinated coffee, with the filter funnel for ground coffee.

E Never add more than two level measuring spoons of ground

coffee.

2 Preparation

E Use ground coffee which is not ground too finely. Very fine

coffee can block up the system so that the coffee only comes

out in drips.

E If you did not fill the machine with a sufficient amount of

ground coffee, ‘Not enough ground coffee’ is displayed and

the S8/S80 stops the operation.

E The desired speciality coffee must be prepared within

approximately one minute after filling with the ground coffee.

Otherwise the S8/S80 stops the operation and is once more

ready for use.

All speciality coffees with ground coffee are always prepared follow­ing the same model.

Example:Proceed as follows to prepare one espresso using ground
coffee.
Precondition:The start screen is displayed.

T Place an espresso cup under the coffee spout.

T Open the cover of the filler funnel for ground coffee.

‘Please add ground coffee’

T Place one level measuring spoon of ground coffee into the

filler funnel.

T Close the cover of the filler funnel.

T Touch ‘Espresso’.

Preparation starts. ‘Espresso’ appears and the preset amount
of water for espresso flows into the cup.
Preparation stops automatically. Your S8/S80 is once more
ready for use.

Adjusting the grinder

CAUTION

You can adjust the grinder to suit the degree of roast of your coffee.

If you adjust the consistency of grind when the grinder is not oper­ating, the grinder adjustment switch could be damaged.

T Only adjust the consistency of grind when the grinder is run-

ning.

The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.

19

2 Preparation

Example:Proceed as follows to change the consistency of grind
during the preparation of an espresso.
Precondition:The start screen is displayed.

T Place a cup under the coffee spout.

T Open the cover of the grinder adjustment switch.

T Touch ‘Espresso’ to start preparation.

T Turn the grinder adjustment switch to the desired position

while the grinder is running.
The preset amount of water flows into the cup. Preparation
stops automatically.

Hot water

J

CAUTION

The S8/S80 allows you to prepare different variants of hot water:

‘Hot water’ and ‘Hot water for green tea’.

To obtain a perfect water flow, use the hot-water nozzle supplied.

There is a danger of scalding from hot water splashes.

T Avoid direct contact with the skin.

Example:Proceed as follows to prepare hot water for green tea.
Precondition:The start screen is displayed.

T Touch the product selector symbol (top right) to go to the

product selector view.

T Move your finger across the display until ‘Hot water for

green tea’ is displayed in the centre.

T Touch ‘Hot water for green tea’.

‘Insert hot-water nozzle’

T Remove the professional fine foam frother from the milk

system.

T Fit the hot-water nozzle on the milk system.

T Touch ‘Next’.

‘Hot water for green tea’, the preset amount of water flows

into the cup.
Preparation stops automatically. Your S8/S80 is once more
ready for use.

20

3 Daily operation

3 Daily operation

Filling the water tank

CAUTION

Switching on the
machine

Daily maintenance of the machine and hygiene when handling milk,
coffee and water are key to a perfect coffee result in the cup every
time. You should therefore change the water daily.

Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.

T Only fill the water tank with fresh, cold water.

T Open the water tank cover.

T Remove the water tank and rinse it with cold water.

T Fill the water tank with fresh, cold water and reinsert the

tank.

T Close the water tank cover.

T Place a receptacle under the coffee spout.

T Press the On/Off button Q to switch the S8/S80 on.

‘Welcome to JURA’
‘Machine is heating’
‘Machine is rinsing’, the system is rinsed. The rinse stops

automatically. Your S8/S80 is ready for use.

Daily maintenance

To ensure that you get many years of reliable service out of your S8/
S80 and to guarantee the optimum coffee quality, the machine
requires daily maintenance.

T Pull out the drip tray.

T Empty the coffee grounds container and the drip tray. Rinse

them both with warm water.

E Always empty the coffee grounds container when the machine

is switched on. This is the only way of resetting the coffee

grounds counter.

T Refit the coffee grounds container and the drip tray.

T Rinse the water tank with clean water.

21

3 Daily operation

T Clean the milk system (see Chapter 5 ‘Maintenance – Clean-

ing the milk system’).

T Remove the milk pipe and rinse it thoroughly under running

water.

T Dismantle and rinse the milk system (see Chapter 5 ‘Main-

tenance – Dismantling and rinsing the professional fine
foam frother’).

T Wipe the surface of the machine with a clean, soft, damp

cloth (e.g. microfibre cloth).

E To clean the display, you can disable it under ‘Maintenance

status’ / ‘Lock display’.

You will find more information about caring for your S8/S80 in pro­gramming mode under ‘Maintenance status’ / ‘Maintenance infor-

mation’.

Regular maintenance

Carry out the following maintenance actions regularly or as requi­red:

In the interests of hygiene, we recommend changing the milk

U

pipe and interchangeable milk spout on a regular basis

(approximately every 3 months). Replacements are available

from specialised dealers.

Clean the inside of the water tank, e.g. with a brush. Further

U

information about the water tank is provided in these instruc-

tions for use (see Chapter 5 ‘Maintenance – Descaling the

water tank’).

Traces of milk and coffee may stick to the top and bottom of

U

the cup grille. If this happens, clean the cup grille.

22

3 Daily operation

Switching off the
machine

When the S8/S80 is switched off, the system is automatically rinsed
if a speciality coffee has been prepared. If milk has been prepared,
you will also be prompted to clean the milk system.

T Place one receptacle under the coffee spout and another

under the milk system.

T Press the On/Off button Q.

E If milk has been prepared, you will be prompted to clean the

milk system (‘Clean the milk system’). After 10 seconds the

switch-off process continues automatically.

If milk has been prepared but you have not started milk
system cleaning, the milk system is rinsed first (‘Milk system

is being rinsed’).
‘Machine is rinsing’, the system rinses itself. The operation

stops automatically. Your S8/S80 is switched off.

23

4 Permanent settings in programming mode

4 Permanent settings in programming mode

Touch ‘P’ to enter programming mode. Move your finger across the
display to navigate through the programme items and permanently
save the desired settings. The following settings can be made:

Programme
item

‘Machine
settings’

‘Maintenance
status’

‘Product
settings’

Sub-item Explanation

‘Switch off after’

‘Save energy’

‘Operating instructions’

‘Factory setting’

‘Units’

‘Display’

‘Water hardness’

‘Choose language’

‘Product counter’,
‘Maintenance counter’

‘Demo mode’ You cannot prepare any products in demo mode.
‘Connect accessory’,
‘Disconnect accessories’

(Only displayed if the
JURA Smart Connect is
being used.)

‘Version’ Software version
‘Clean the milk system’,
‘Clean’,
‘Change filter’ (only if

filter is fitted),

‘Descale’,
‘Rinse’,
‘Lock display’,
‘Maintenance information’

T Set the time after which the S8/S80 should switch off
automatically.

T Activate energy-saving mode.
T Activate/deactivate the operating instructions on

how to use the professional fine foam frother and
hot-water nozzle.

TReset the machine to its factory setting.
T Select the unit for the amount of water.
TChange the display brightness.
T You can set the water hardness of the water used.
T Select your language.
T Keep track of all products prepared and view the

number of maintenance programmes performed.

T Connect the S8/S80 wirelessly to a JURA accessory or
disconnect the connection again.

T Here you can start the required maintenance
programme or find out what maintenance actions are
required.

T Select your settings for speciality coffees and hot
water.

24

4 Permanent settings in programming mode

Product settings

Adjusting the product

settings

Product Coffee

strength

Ristretto,
espresso

Coffee 10 levels Coffee: 25ml–240ml Temperature (low, normal, high),

Two ristretti,
two espressi,
two coffees
Cappuccino,
flat white,
caffè latte
Latte macchiato 10 levels Coffee: 25ml–240ml

Espresso
macchiato

10 levels Coffee: 15ml–80ml Temperature (low, normal, high),

– Coffee: the amount set

10 levels Coffee: 25ml–240ml

10 levels Coffee: 15ml–80ml

Touch a product on the start screen for about 2 seconds to view the
list of setting options:

‘Product settings’: Specify individual settings such as coffee

U

strength, amount of water, etc.

‘Product name’: Change the name of the product.

U

‘Delete’: Remove a product from the start screen.

U

‘Replace product’: Replace the products on the start screen

U

with your favourites.

‘Copy product’: Duplicate any product, for example to create

U

a variant with a new product name and individual settings.

‘Double product’ (not for products with milk or hot water):

U

Create a double product of the desired speciality.

E You can only change the settings of products that are stored

on the start screen.

The following settings can be set permanently for all speciality
coffees, milk and hot water:

Amount More settings

product name, delete/replace/copy/
double product

product name, delete/replace/copy/
double product

Temperature (as for single product),
for the single product is
doubled.

Milk: 1sec.–120sec.

Milk: 1sec.–120sec.
Interval: 0sec.–60sec.

Milk: 1sec.–120sec.

product name, delete product

Temperature (low, normal, high),

product name, delete/replace/copy

product

Temperature (low, normal, high),

product name, delete/replace/copy

product

Temperature (low, normal, high),

product name, delete/replace/copy

product

25

4 Permanent settings in programming mode

Product Coffee

strength

Milk foam,
milk
Hot water,
hot water for
green tea

– Milk: 1sec.–120sec. Product name, delete/replace/copy

– Water: 25ml–450ml Temperature (low, normal, high),

Amount More settings

product

product name, delete/replace/copy

product

Permanent settings in programming mode always follow the same
model.

Example:Proceed as follows to change the coffee strength for one
espresso.
Precondition:The start screen is displayed.

T Touch ‘Espresso’ for about 2 seconds until the list of possible

settings is displayed.

T Touch ‘Product settings’.

‘Espresso’

T Move your finger across the display until ‘Coffee strength’ is

displayed in the centre.

T Now move your finger to the left or right to change the set-

ting for the coffee strength.

T Touch ‘Save’.

‘Saved’ appears briefly on the display.

T Touch ‘Back’ the number of times needed to display the start

screen again.

Automatic switch-off

26

By instructing your S8/S80 to automatically switch itself off, you can
cut down your energy consumption. If this function is activated,
your S8/S80 switches off automatically after the preset time follow­ing the last action on the machine.

You can set the automatic switch-off to 15minutes, 30minutes or
1–9hours.

Precondition:The start screen is displayed.

T Touch ‘P’.

‘Machine settings’

T Touch ‘Machine settings’.

‘Switch off after’

4 Permanent settings in programming mode

T Touch ‘Switch off after’.

‘Switch off after’

T Now move your finger to the left or right to change the

switch-off time.

T Touch ‘Save’.

‘Saved’ appears briefly on the display.
‘Switch off after’

T Touch ‘Back’ the number of times needed to display the start

screen again.

Energy-saving mode

In the programme item ‘Machine settings’ / ‘Save energy’ you can
set an energy-saving mode:

‘Save energy’ / ‘1’

U

Soon after the last preparation, the S8/S80 stops heating up.

U

The ‘ESM’ symbol (Energy Save Mode, E.S.M.
Before you can prepare a speciality coffee, speciality coffee

U

with milk, or hot water, the machine must heat up.

‘Save energy’ / ‘0’

U

All speciality coffees, speciality coffees with milk and hot

U

water can be prepared without having to wait.

Example:Proceed as follows to switch energy-saving mode off.
Precondition:The start screen is displayed.

T Touch ‘P’.

‘Machine settings’

T Touch ‘Machine settings’.

‘Switch off after’

T Move your finger across the display until ‘Save energy’ is dis-

played in the centre.

T Touch ‘Save energy’.

‘Save energy’

T Now move your finger across the controller and set it to ‘0’.
T Touch ‘Save’.

‘Saved’ appears briefly on the display.
‘Save energy’

T Touch ‘Back’ the number of times needed to display the start

screen again.

©

) is displayed.

27

4 Permanent settings in programming mode

Operating instructions

In the programme item ‘Machine settings’/ ‘Operating instructions’
you can define whether the operating instructions on how to use the
professional fine foam frother and hot-water nozzle should be dis­played during preparation.

Example:How to stop the operating instructions from being dis­played.
Precondition:The start screen is displayed.

T Touch ‘P’.

‘Machine settings’

T Touch ‘Machine settings’.

‘Switch off after’

T Move your finger across the display until ‘Operating instruc-

tions’ is displayed in the centre.

T Touch ‘Operating instructions’.

‘Operating instructions’

T Now move your finger across the controller and set it to ‘0’.
T Touch ‘Save’.

‘Saved’ appears briefly on the display.
‘Operating instructions’

T Touch ‘Back’ the number of times needed to display the start

screen again.

Restore factory settings

28

In the programme item ‘Machine settings’ / ‘Factory setting’ the
machine can be reset to its factory setting. Your S8/S80 then
switches off.

Precondition:The start screen is displayed.

T Touch ‘P’.

‘Machine settings’

T Touch ‘Machine settings’.

‘Switch off after’

T Move your finger across the display until ‘Factory setting’ is

displayed in the centre.

T Touch ‘Factory setting’.

‘Factory setting’ / ‘Reset the machine to the factory set­tings?’

T Touch ‘ Yes’.

‘Saved’ appears briefly on the display.

Your S8/S80 is switched off.

4 Permanent settings in programming mode

Unit for amount of water

Display brightness

In the programme item ‘Machine settings’/ ‘Units’ you can select
the unit used for the amount of water.

Example:Proceed as follows to change the unit for the amount of
water from ‘ml’ to ‘oz’.
Precondition:The start screen is displayed.

T Touch ‘P’.

‘Machine settings’

T Touch ‘Machine settings’.

‘Switch off after’

T Move your finger across the display until ‘Units’ is displayed

in the centre.

T Touch ‘Units’.

‘Units’

T Now move your finger to the left or right to change the set-

ting to ‘oz’.

T Touch ‘Save’.

‘Saved’ appears briefly on the display.
‘Units’

T Touch ‘Back’ the number of times needed to display the start

screen again.

In the programme item ‘Machine settings’/ ‘Display’ you can set the
display brightness (as a percentage).

Precondition:The start screen is displayed.

T Touch ‘P’.

‘Machine settings’

T Touch ‘Machine settings’.

‘Switch off after’

T Move your finger across the display until ‘Display’ is dis-

played in the centre.

T Touch ‘Display’.

‘Display’

T Now move your finger to the left or right to change the set-

ting.

T Touch ‘Save’.

‘Saved’ appears briefly on the display.
‘Display’

29

4 Permanent settings in programming mode

T Touch ‘Back’ the number of times needed to display the start

screen again.

Setting the water
hardness

The harder the water is, the more frequently the S8/S80 needs to be
descaled. It is therefore important to set the water hardness accu­rately.

The water hardness was set when the machine was first used. You
can change this setting at any time.

The water hardness can be adjusted on a continuous scale between
1 °dH and 30 °dH.

Precondition:The start screen is displayed.

T Touch ‘P’.

‘Machine settings’

T Touch ‘Machine settings’.

‘Switch off after’

T Move your finger across the display until ‘Water hardness’ is

displayed in the centre.

T Touch ‘Water hardness’.

‘Water hardness’

T Now move your finger to the left or right to change the set-

ting.

T Touch ‘Save’.

‘Saved’ appears briefly on the display.
‘Water hardness’

T Touch ‘Back’ the number of times needed to display the start

screen again.

Language

30

In this programme item you can set the language used by your S8/
S80.

Example:Proceed as follows to change the language from ‘English’
to ‘Deutsch’.
Precondition:The start screen is displayed.

T Touch ‘P’.

‘Machine settings’

T Touch ‘Machine settings’.

‘Switch off after’

4 Permanent settings in programming mode

T Move your finger across the display until ‘Choose language’

is displayed in the centre.

T Touch ‘Choose language’.

‘Choose language’

T Move your finger across the display until the desired lan-

guage, e.g. ‘Deutsch’, is displayed in the centre.

T Touch ‘Save’.

‘Gespeichert’ appears briefly on the display.
‘Sprachauswahl’

T Touch ‘Zurück’ the number of times needed to display the

start screen again.

Querying information

In the programme item ‘Machine settings’ you can view the follow­ing information:

‘Product counter’: Number of prepared coffee speciality cof-

U

fees, speciality coffees with milk and hot water

‘Maintenance counter’: Number of maintenance programmes

U

performed (cleaning, descaling etc.)

‘Version’: Software version

U

Example:Proceed as follows to view the number of speciality cof­fees prepared.
Precondition:The start screen is displayed.

T Touch ‘P’.

‘Machine settings’

T Touch ‘Machine settings’.

‘Switch off after’

T Move your finger across the display until ‘Product counter’

is displayed in the centre.

T Touch ‘Product counter’.

‘Product counter’

T Touch ‘Next’ to view the number of other products.
T Touch ‘Back’ the number of times needed to display the start

screen again.

31

5 Maintenance

5 Maintenance

Your S8/S80 has the following integrated maintenance programmes:

Rinsing the machine (‘Rinse’)

U

Cleaning the milk system (‘Clean the milk system’)

U

Changing the filter (‘Change filter’) (only if filter is fitted)

U

Cleaning the machine (‘Clean’)

U

Descaling the machine (‘Descale’)

U

E Clean the machine, descale the machine or change the filter

when you are prompted to do so.

E Touch ‘P’ to view the list of maintenance programmes (‘Main-

tenance status’). When the bar is completely filled with red,

your S8/S80 will prompt you to perform the appropriate main­tenance programme.

E In the interests of hygiene, you should clean the milk system

daily when you have been preparing milk.

Rinsing the machine

Automatic milk system
rinsing

32

You can initiate the rinse operation manually at any time.

Precondition:The start screen is displayed.

T Place one receptacle under the coffee spout and another

under the fine foam frother.

T Touch ‘P’.

‘Machine settings’

T Move your finger across the display until ‘Maintenance sta-

tus’ is displayed in the centre.

T Touch ‘Maintenance status’.

‘Clean’

T Move your finger across the display until ‘Rinse’ is displayed

in the centre.

T Touch ‘Rinse’ to start the rinse operation.

‘Machine is rinsing’
‘Milk system is being rinsed’

The rinse stops automatically. The start screen is displayed.

15 minutes after milk preparation, the milk system is automatically
rinsed. Therefore always place a receptacle under the milk system
after preparing milk.

5 Maintenance

Cleaning the milk system

CAUTION

To ensure that the milk system always works properly, you must
clean it daily when you have been preparing milk.

If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.

T Use only original JURA maintenance products.

E JURA milk system cleaner is available from specialised dealers.
E To clean the milk system, use the container supplied.

Precondition:The start screen is displayed. ‘Clean the milk system’
is displayed.

T Touch ‘Clean the milk system’.
T Touch ‘Clean the milk system’ again.
T Touch ‘Start’.
T Touch ‘Start’ again.

‘Milk system cleaner’ / ‘Connect the milk tube’ / ‘Fresh water’

T Remove the milk pipe from the milk container or milk cooler.
T Add milk system cleaner to the front part of the container

up to the bottom mark (indicated by 6).
T Then fill with water up to the upper mark.
T Place the container under the fine foam frother.

6

T Connect the milk pipe to the container.

E To connect the milk pipe to the container correctly, the pipe

must be fitted with a connector.

T Touch ‘Next’.

‘Milk system is being cleaned’

The operation is interrupted, ‘Fresh water’.
T Rinse the container thoroughly and fill the front part with

fresh water up to the upper mark.
T Place this under the fine foam frother and reconnect the

milk pipe to the container.
T Touch ‘Next’.

‘Milk system is being cleaned’

The operation stops automatically.

33

5 Maintenance

Dismantling and rinsing
the professional fine
foam frother

1

2

To make sure the professional fine foam frother works properly, and
in the interests of hygiene, it must be dismantled and rinsed daily if
you have been preparing milk.

T Remove the milk pipe and rinse it thoroughly under running

water.

T Remove the professional fine foam frother.

T Dismantle the fine foam frother into its individual parts.
T Rinse all the parts under running water. If there are severely

dried-on milk residues, firstly immerse the individual parts

in a solution of 250ml cold water and 1 capful of JURA milk

system cleaner. Then rinse the parts thoroughly.

T Re-assemble the professional fine foam frother.

E Ensure that all individual parts are correctly and firmly con-

nected to ensure optimum operation of the professional fine
foam frother.

34

T Re-fit the fine foam frother on the milk system.

5 Maintenance

Inserting the filter

Your S8/S80 no longer has to be descaled if you are using the CLARIS
Smart filter cartridge.

Precondition:The start screen is displayed.

T Remove and empty the water tank.
T Fit the filter cartridge extension supplied on top of a CLARIS

Smart filter cartridge.
T Insert the filter cartridge with its extension into the water

tank.
T Turn the filter cartridge clockwise until it audibly clicks into

place.
T Fill the water tank with fresh, cold water and reinsert the

tank.

E The machine automatically detects that you have just inserted

the filter cartridge.

‘Saved’ appears briefly on the display.

‘Filter is being rinsed’, water flows directly into the drip tray.

Rinsing of the filter stops automatically.

‘Empty drip tray’

T Empty the drip tray and coffee grounds container and put

them back into the machine.

The start screen is displayed.

Changing the filter

E If the filter is active, this is indicated by a blue filter symbol at

the top of the display.

E Once the filter cartridge stops working (depending on the

water hardness setting), the S8/S80 will prompt you to change
the filter.

E CLARIS Smart filter cartridges are available from specialised

dealers.

Precondition:The start screen is displayed. ‘Change the filter’ is dis-
played.

T Touch ‘Change the filter’.
T Touch ‘Change the filter’ again.

‘Change filter’

T Remove and empty the water tank.

35

5 Maintenance

T Turn the filter cartridge anticlockwise and remove it along

with the extension from the water tank.
T Fit the filter cartridge extension on top of a new CLARIS

Smart filter cartridge.
T Insert the filter cartridge with its extension into the water

tank.
T Turn the filter cartridge clockwise until it audibly clicks into

place.
T Fill the water tank with fresh, cold water and reinsert the

tank.

‘Saved’ appears briefly on the display. The machine has

automatically detected that you have just changed the filter

cartridge.

‘Filter is being rinsed’, water flows directly into the drip tray.

Rinsing of the filter stops automatically.

‘Empty drip tray’

T Empty the drip tray and coffee grounds container and put

them back into the machine.

The start screen is displayed.

E If the filter is active, this is indicated by a blue filter symbol at

the top of the display.

Cleaning the machine

CAUTION

36

After 180preparations or 80switch-on rinses, the S8/S80 will prompt
you to clean it.

If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.

T Use only original JURA maintenance products.

E The cleaning programme lasts approximately 20 minutes.
E Do not interrupt the cleaning programme. The quality of

cleaning will be impaired if you do so.

E JURA cleaning tablets are available from specialised dealers.

Precondition:The start screen is displayed. ‘Clean machine’ is dis-
played.

T Touch ‘Clean machine’.

‘Clean’

5 Maintenance

T Touch ‘Clean’.
T Touch ‘Start’.
T Touch ‘Start’ again.

‘Empty coffee grounds container’

T Empty the drip tray and coffee grounds container and put

them back into the machine.
T Place one receptacle under the coffee spout and another

under the fine foam frother.
T Touch ‘Next’.

‘Machine is being cleaned’ appears and water flows out of

the coffee spout and the fine foam frother.

The operation is interrupted, ‘Add cleaning tablet’.

T Open the cover of the filler funnel for ground coffee.
T Insert a JURA cleaning tablet into the filler funnel.
T Close the cover of the filler funnel.
T Touch ‘Next’.

‘Machine is being cleaned’, water flows repeatedly out of the

coffee spout and the fine foam frother.

The operation stops automatically.

‘Empty coffee grounds container’

T Empty the drip tray and coffee grounds container and put

them back into the machine.

Cleaning is now complete. The start screen is displayed.

Descaling the machine

J

CAUTION

The S8/S80 builds up deposits of limescale over time and automat­ically prompts you to descale it when necessary. The degree of cal­cification depends on the hardness of your water.

E If you are using a CLARIS Smart filter cartridge, you will not be

prompted to descale.

If the descaling agent comes into contact with the skin or eyes, this
can cause irritation.

T Avoid contact with the skin or eyes.
T Rinse off the descaling agent with clean water. Should you get

any descaling agent in your eye, see a doctor.

37

5 Maintenance

CAUTION

CAUTION

CAUTION

If the wrong descaling agent is used, the machine could be dam­aged and/or traces could be left behind in the water.

T Use only original JURA maintenance products.

If the descaling operation is interrupted, there may be damage to
the machine.

T Allow the descaling programme to run to the end.

If the descaling agent comes into contact with sensitive surfaces
(e.g. marble), damage cannot be ruled out.

T Clean up any splashes immediately.

E The descaling programme lasts approximately 45minutes.
E JURA descaling tablets are available from specialised dealers.

Precondition:The start screen is displayed. ‘Decalcify machine’ is
displayed.

T Touch ‘Decalcify machine’.

‘Descale’

T Touch ‘Descale’.
T Touch ‘Start’.
T Touch ‘Start’ again.

‘Empty drip tray’

T Empty the drip tray and coffee grounds container and put

them back into the machine.

‘Pour descaling agent into water tank’

T Remove and empty the water tank.
T Completely dissolve 3JURA descaling tablets in a receptacle

holding 500ml of water. This may take several minutes.
T Pour the solution into the empty water tank and insert it

into the machine.

38

5 Maintenance

T Place one receptacle under the coffee spout and another

under the fine foam frother.
T Touch ‘Next’.

‘Machine is being descaled’ appears and water flows out of

the fine foam frother repeatedly.

The operation is interrupted, ‘Empty drip tray’.
T Empty the drip tray and coffee grounds container and put

them back into the machine.

‘Fill water tank’

T Remove the water tank and rinse it thoroughly.
T Fill the water tank with fresh, cold water and reinsert the

tank.
T Place one receptacle under the coffee spout and another

under the fine foam frother.
T Touch ‘Next’.

‘Machine is being descaled’, the descaling operation is con-

tinued.

The operation is interrupted, ‘Empty drip tray’.
T Empty the drip tray and coffee grounds container and put

them back into the machine.

Descaling is now complete. The start screen is displayed.

Cleaning the bean
container

E If the descaling operation stops unexpectedly, rinse the water

tank thoroughly.

Coffee beans may be covered with a slight oil film which remains on
the walls of the bean container. These traces may negatively affect
the coffee result. For this reason clean the bean container from time
to time.

Precondition:‘Fill bean container’ is displayed.

T Switch the machine off with the On/Off button Q.
T Remove the aroma preservation cover.
T Clean the bean container with a soft, dry cloth.
T Fill the bean container with coffee beans and close the

aroma preservation cover.

39

5 Maintenance

Descaling the water tank

Limescale deposits may form in the water tank. To ensure correct
function of the machine, descale the water tank from time to time.

T Remove the water tank.
T If you use a CLARIS Smart filter cartridge, remove this.
T Completely fill the water tank and dissolve 3 JURA descaling

tablets in it.
T Leave the water tank with the descaling solution for several

hours (e.g. overnight).

T Empty the water tank and rinse it thoroughly.
T If you use a CLARIS Smart filter cartridge, insert this again.
T Fill the water tank with fresh, cold water and reinsert the

tank.

40

6 Display messages

Message Cause/Result Action

‘Fill water tank’ The water tank is empty. You

cannot prepare any products.

‘Empty coffee
grounds container’

‘Drip tray not
fitted’

‘Fill bean contai­ner’

‘Change the filter’ The filter cartridge no longer works.

‘Clean machine’ The S8/S80 is prompting you to

‘Decalcify machine’ The S8/S80 is prompting you to

‘Machine too hot
for maintenance’

The coffee grounds container is full.
You cannot prepare any products.

The drip tray is not inserted
correctly or is not inserted at all.
You cannot prepare any products.
The bean container is empty. You
cannot prepare any speciality
coffees, but you can prepare hot
water and milk.

clean it.

descale it.

The system is too hot to start a
maintenance programme.

T Fill the water tank (see Chapter 3
‘Daily operation – Filling the water
tank’).

T Empty the coffee grounds
container and the drip tray (see
Chapter 3 ‘Daily operation –
Daily maintenance’).

T Fit the drip tray.

T Fill the bean container (see

Chapter 1 ‘Preparing and using
for the first time – Filling the bean
container’).

T Replace the CLARIS Smart filter
cartridge (see Chapter 5 ‘Mainte­nance – Changing the filter’).

T Perform cleaning (see Chapter 5
‘Maintenance – Cleaning the
machine’).

T Perform descaling (see Chapter 5
‘Maintenance – Descaling the
machine ’).

T Wait for several minutes until the
system has cooled or prepare a
speciality coffee or hot water.

6 Display messages

41

7 Troubleshooting

7 Troubleshooting

Problem Cause/Result Action

Insufficient foam is
produced when the
milk is frothed or milk
sprays out of the fine
foam frother.

Coffee only comes out
in drips when it is
being prepared.

‘Fill water tank’ is

displayed although the
water tank is full.
Grinder is making a
very loud noise.

‘Error2’ or ‘Error5’ is

displayed.

Other ‘Error’ messages
are displayed.

The fine foam frother is
dirty.

The coffee is ground too
finely and obstructs the
system.

The water hardness may
not have been correctly
set.
The water tank float is
trapped.

There are foreign objects
in the grinder.

If the machine has been
exposed to the cold for a
long period of time,
heating may be disabled
for safety reasons.

–

T Clean the fine foam frother (see Chapter 5
‘Maintenance – Cleaning the milk system’).
T Dismantle and rinse the fine foam frother
(see Chapter 5 ‘Maintenance –
Dismantling and rinsing the professional
fine foam frother’).

T Set the grinder to a coarser setting (see
Chapter 2 ‘Preparation – Adjusting the
grinder’).

T Perform descaling (see Chapter 5
‘Maintenance – Descaling the machine ’).

T Descale the water tank (see Chapter 5
‘Maintenance – Descaling the water tank’).

T Contact customer support in your
country (see Chapter 11 ‘JURA contact
details/ Legal information’).

T Warm the machine at room temperature.

T Switch the S8/S80 off with the On/Off

button Q. Contact customer support in
your country (see Chapter 11 ‘JURA contact
details/ Legal information’).

42

E If you were unable to solve the problem, contact customer

support in your country (see Chapter 11 ‘JURA contact details/
Legal information’).

8 Transport and environmentally friendly disposal

8 Transport and environmentally friendly disposal

Transport/ Emptying the
system

Disposal

Keep the packaging for your S8/S80. It should be used to protect the
machine during transport.

In order to protect the S8/S80 from frost during transport, the sys­tem must be emptied.

Precondition:The start screen is displayed.

T Remove the milk pipe from the fine foam frother.
T Place a receptacle under the fine foam frother.
T Touch ‘Milk foam’.
T Remove and empty the water tank.
T Change the time to ‘60sec.’.

Steam will continue to be discharged from the fine foam

frother until the system is empty.

‘Fill water tank’

T Press the On/Off button Q.

Your S8/S80 is switched off.

Please dispose of old machines in an environmentally neutral way.

H

Old machines contain valuable, recyclable materials which should
be recycled. Please therefore dispose of old machines via suitable
collection systems.

43

9 Technical data

9 Technical data

Voltage 220–240V~, 50Hz
Power 1450W
Conformity mark

Pump pressure static, max. 15bar
Holding capacity of water tank
(without filter)
Holding capacity of bean container 280g
Holding capacity of coffee grounds
container
Cable length approx. 1.1m
Weight approx. 10.0kg
Dimensions (W×H×D) 28.0 × 34.8 × 44.4cm

A

1.9l

max. 16 portions

Wireless connections

CLARIS Smart filter cartridge
(RFID technology)
JURA Smart Connect
(Bluetooth connection)

Information for testers (repeat test in accordance with DIN VDE
0701-0702): The central grounding point (CGP) is located on the
underside of the machine, right next to the mains cable's connec­tion point.

Frequency band 13.56 MHz
Max. transmission power < 1 mW
Frequency band 2.4 GHz
Max. transmission power < 1 mW

44

10 Index

10 Index

A

Addresses 48
Adjusting the product settings 25
Aroma preservation cover

Bean container with aroma preservation
cover 4

Automatic switch-off 26

B

Bean container

Bean container with aroma preservation
cover 4
Cleaning 39

Filling 11
Bluetooth 44
Bus bar

Technical data 44
Button

On/Off button 5

C

Caffè latte 17
Cappuccino 17
Cappuccino frother cleaning

Cleaning the milk system 33
Central grounding point 44
CLARIS Smart filter cartridge

Change 35

Insert 35
Cleaning

Bean container 39

Machine 36
Coffee 16

Two coffees 17
Coffee grounds container 4
Coffee spout

Height-adjustable coffee spout 4
Connect accessory 14
Consistency of grind

Adjusting the grinder 19

Grinder adjustment switch 5
Contact details 48
Cover

Filler funnel for ground coffee 5

Water tank 4
Cup grille 4
Customer support 48

D

Daily maintenance 21
Declaration of Conformity 48
Descaling

Machine 37
Water tank 40

Display

Touchscreen display 4, 10
Display brightness 29
Display messages 41
Disposal 43
Double product 17
Drip tray 4

E

Emptying the system 43
Energy-saving mode 27
Errors

Troubleshooting 42
Espresso 16

Two espressi 17
Espresso macchiato 17
EU Declaration of Conformity 48

F

Factory settings

Restore factory settings 28
Filler funnel

Filler funnel for ground coffee 5
Filling

Bean container 11

Water tank 21
Filter

Change 35

Insert 35
Fine foam frother

Professional fine foam frother 4
First-time use 11
Flat white 17

G

Green tea 20
Grinder adjustment switch 5
Ground coffee 18

Measuring spoon for ground coffee 5
Grounding point 44

45

10 Index

H

Height-adjustable coffee spout 4
Homepage 10
Hotline 48
Hot water 20
Hot-water nozzle 5

I

Instant coffee

Ground coffee 18

Internet 10

J

JURA

Contact details 48
Internet 10

L

Language 30
Latte macchiato 17

M

Machine

Cleaning 36
Daily maintenance 21
Descaling 37
Regular maintenance 22
Rinsing 32
Setting up 10
Switching off 23

Switching on 21
Mains cable 4
Maintenance 32

Daily maintenance 21

Regular maintenance 22
Measuring spoon for ground coffee 5
Messages, display 41
Milk

Connecting milk 13
Milk foam 18
Milk system

Cleaning 33

Professional fine foam frother 4
Milk system rinsing 32
Milk, warm 18

O

Operating instructions 28

P

Permanent settings in programming mode

24

Preparation 15, 17

At the touch of a button 15
Caffè latte 17
Cappuccino 17
Coffee 16
Espresso 16
Espresso macchiato 17
Flat white 17
Green tea 20
Ground coffee 18
Hot water 20
Latte macchiato 17
Milk 18
Milk foam 18
Ristretto 16
Two coffees 17
Two espressi 17
Two ristretti 17
Two speciality coffees 17

Using the product selector 15
Preparation options 15
Problems

Troubleshooting 42
Product selector view 15
Product settings 25

Adjusting 25
Professional fine foam frother 4

Dismantling and rinsing 34
Programming mode 24

Automatic switch-off 26

Display brightness 29

Energy-saving mode 27

Language 30

Operating instructions 28

Product settings 25

Querying information 31

Restore factory settings 28

Setting the water hardness 30

Unit for amount of water 29
Proper use 6

46

Q

Querying information 31

R

Regular maintenance 22
RFID 44
Rinsing

Machine 32

Ristretto 16, 17

Two ristretti 17

Rotary Selection 15

S

Safety 6
Safety information 6
Settings

Permanent settings in programming
mode 24

Setting up

Setting up the machine 10
Short operating instructions 10
Smart Connect 14
Switching off 23
Switching on 21
Switch-off

Automatic switch-off 26
Symbol description 3

T

Technical data 44
Tel 48
Touchscreen display 4, 10
Transport 43
Troubleshooting 42
Two products 17

U

Unit for amount of water 29
Use, First-time 11

W

Warm milk 18
Water hardness

Determining the water hardness 11

Setting the water hardness 30
Water tank 4

Descaling 40

Filling 21
Website 10
Wireless connection 9, 14, 35, 44

10 Index

47

J73423/S8-S80/en/202007

11 JURA contact details/ Legal information

11 JURA contact details/ Legal information

JURA Elektroapparate AG
Kaffeeweltstrasse 10
CH-4626 Niederbuchsiten
Tel. [phone]

@ You will find additional contact details for your country at

jura.com.

@ If you need assistance with using your machine, you can find

this at jura.com/service.

Directives

Technical changes

Feedback

Copyright

The machine complies with the following directives:

2014/35/EU– Low Voltage Directive

U

2014/30/EU– Electromagnetic Compatibility

U

2009/125/EC– Ecodesign Directive

U

2011/65/EU– RoHS Directive

U

2014/53/EU – Wireless Voltage Directive

U

A detailed EU Declaration of Conformity for your S8/S80 can be
found at jura.com/conformity.

We reserve the right to make technical changes. The diagrams used
in these instructions for use are for illustration purposes only and do
not represent the original colours of the machine. Some details of
your S8/S80 may vary.

Your opinion is important to us! Use the contact details at

jura.com.

The instructions for use contain information which is protected by
copyright. It is not permitted to photocopy these instructions for use
or translate them into another language without the prior written
consent of JURA Elektroapparate AG.

48