IMPRESSA J9.2 One Touch Instructions for Use
The Instructions for Use has been awarded the seal of
approval by the independent German Technical Inspection
Agency, TÜV SÜD, due to its easy-to-understand style, its
thoroughness and coverage of safety aspects.
Table of contents
Your IMPRESSA J9.2 One Touch
Control elements 4
Important information 6
Proper use ......................................................................................................................................................6
For your safety ...............................................................................................................................................6
1 Preparing and using for the first time 9
JURA on the Internet .....................................................................................................................................9
Setting up the machine ............................................................................................................................... 9
Filling the water tank ....................................................................................................................................9
Filling the bean container ............................................................................................................................9
First-time use ................................................................................................................................................10
Inserting and activating the filter ...............................................................................................................11
Determining and adjusting the water hardness .....................................................................................12
Adjusting the grinder ..................................................................................................................................13
2 Preparation 14
Ristretto, espresso and coffee ....................................................................................................................14
Preparing two speciality coffees at the touch of a button ...................................................................14
Latte macchiato, cappuccino .....................................................................................................................15
Warm milk and milk foam ..........................................................................................................................16
Ground coffee ...............................................................................................................................................16
Permanently setting the amount of water for the cup size .................................................................17
Hot water .......................................................................................................................................................18
3 Daily operation 20
Switching on ................................................................................................................................................20
Daily maintenance ......................................................................................................................................20
Switching off .................................................................................................................................................21
4 Permanent settings in programming mode 22
Products ........................................................................................................................................................23
Energy-saving mode ..................................................................................................................................25
Automatic switch-off ..................................................................................................................................26
Rinses ............................................................................................................................................................26
Restore factory settings ............................................................................................................................. 27
Viewing information and maintenance status ......................................................................................28
Unit for amount of water ...........................................................................................................................29
Brightness of symbols ................................................................................................................................29
Language ......................................................................................................................................................30
2
Table of contents
5 Maintenance 31
Rinsing the machine ....................................................................................................................................31
Rinsing the cappuccino frother ................................................................................................................ 32
Cleaning the cappuccino frother .............................................................................................................. 32
Dismantling and rinsing the cappuccino frother .................................................................................. 33
Changing the filter ......................................................................................................................................33
Cleaning the machine ................................................................................................................................ 35
Descaling the machine ..............................................................................................................................36
Cleaning the bean container ..................................................................................................................... 38
Descaling the water tank ...........................................................................................................................39
6 Display messages 40
7 Troubleshooting 42
8 Transport and environmentally friendly disposal 44
Transport / Emptying the system .............................................................................................................44
Disposal .........................................................................................................................................................44
9 Technical data 45
10 Index 46
11 JURA contact details / Legal information 48
Symbol description
Warnings
J CAUTION
J WARNING
CAUTION CAUTION draws your attention to potential damage to the machine.
Symbols used
T Prompt to take action. This symbol means that you are being prompted to
E Information and tips to make it even easier to use your IMPRESSA.
@ References to the JURA website, which provides further information that may be
COFFEE
Always take note of any information marked with the words CAUTION or
WARNING and a warning sign. The signal word WARNING draws your attention to
potential serious injury, and the signal word CAUTION to potential minor injury.
perform some action.
of interest to you: www.jura.com
Display
READY
3
Control elements
Control elements
1 Bean container cover
2 Water tank cover
3 Bean container with aroma preservation
cover
4 Water tank
5 Height-adjustable cappuccino frother
6 Coffee grounds container
7 Drip tray
8 Cup platform
9 Filler funnel for ground coffee
10 Storage compartment cover
11 Grinder adjustment switch
12 Hot-water nozzle
13 Measuring spoon for ground coffee
14 Height- and width-adjustable coffee spout
15 Power switch and mains cable
(side of machine)
4
Control elements
Surface of the machine
1 Q On/Off button
2 g Rotary Switch
3 c Maintenance button
Front
4 Display
5 Preparation buttons
u Ristretto button
i Espresso button
o Coffee button
m Hot Water button
z Milk button
q Latte Macchiato button
p Cappuccino button
5
Important information
Important information
Proper use
For your safety
J
The machine is designed and intended for private domestic use. It
should only be used for coffee preparation and to heat milk and
water. Use for any other purpose will be deemed improper. JURA
Elektroapparate AG cannot accept any responsibility for the consequences of improper use.
Before using the machine read these instructions for use thoroughly
and completely and comply with the instructions they contain.
A warranty service is not applicable for damage or defects caused
by non-compliance with the instructions for use. Keep these
instructions for use close to the machine and pass them on to
the next user.
Please carefully read and observe the important safety information
set out below.
To avoid danger of potentially fatal electric shock:
Never use a machine which is damaged or has a defective
U
mains cable.
In the event of signs of damage, for example if there is a smell
U
of burning, unplug the machine immediately from the mains
supply and contact JURA service.
If the mains cable of this machine is damaged, it must be
U
repaired either directly by JURA or by an authorised JURA
service centre.
Make sure that the IMPRESSA and the mains cable are not
U
located close to hot surfaces.
Be careful to ensure that the mains cable is not trapped and
U
does not rub against sharp edges.
Never open and repair the machine yourself. Do not modify
U
the machine in any way that is not described in these instructions for use. The machine contains live parts. If opened, there
is a danger of potentially fatal injury. Repairs may only be carried out by authorised JURA service centres, using original
spare parts and accessories.
6
Important information
To completely and safely disconnect the machine from the
U
power supply, first switch off the IMPRESSA using the On/Off
button and then at the power switch. Only then should you
remove the mains plug from the power socket.
There is a risk of scalds or burns on the spouts and the cappuccino
frother.
Place the machine out of the reach of children.
U
Do not touch any hot parts. Use the handles provided.
U
Ensure that the cappuccino frother is correctly fitted and
U
clean. If incorrectly fitted or if they become blocked, the cappuccino frother or its parts might come off.
A defective machine is not safe and could cause injury or fire. To
avoid damage and any associated risk of injury or fire:
Never allow the mains cable to loosely hang down. The mains
U
cable could pose a tripping hazard or become damaged.
Protect the IMPRESSA from environmental influences such as
U
rain, frost and direct sunlight.
Do not immerse the IMPRESSA, mains cable or connections in
U
water.
Do not put the IMPRESSA or any individual parts in the dish-
U
washer.
Switch your IMPRESSA off at the power switch before any
U
cleaning operation. Always wipe the IMPRESSA with a damp
cloth rather than a wet one, and protect it from prolonged
exposure to water splash.
Only connect the machine to the mains voltage in accordance
U
with the information on the rating plate. The rating plate is
located on the underside of your IMPRESSA. Further technical
data is provided in these instructions for use (see Chapter 9
‘Technical data’).
Please only use original JURA maintenance products. Use of
U
products that are not explicitly recommended by JURA could
damage the IMPRESSA.
Do not use any coffee beans treated with additives or caramel-
U
ised coffee beans.
7
Important information
Only fill the water tank with fresh, cold water.
U
Switch the machine off at the power switch if you are going to
U
be absent for a longer period of time.
People, including children, who
do not have the physical, sensory or mental capabilities to use
U
the machine safely or
are inexperienced or lack knowledge in how to use the
U
machine safely
must be supervised by a responsible person when using it, or must
be instructed in how to use it correctly.
Safety when handling the CLARIS Blue filter cartridge:
Filter cartridges should be kept out of the reach of children.
U
Store filter cartridges in a dry place in the sealed packaging.
U
Protect cartridges from heat and direct sunlight.
U
Do not use damaged filter cartridges.
U
Do not open filter cartridges.
U
8
1 Preparing and using for the first time
1 Preparing and using for the first time
JURA on the Internet
Setting up the machine
Filling the water tank
CAUTION
Visit us on the Internet.
@ You can download short operating instructions for your
machine from the JURA website (www.jura.com). You will also
find interesting and up-to-date information on your IMPRESSA
and on every aspect of coffee.
When setting up your IMPRESSA, please note the following:
Place the IMPRESSA on a horizontal surface that is not sensi-
U
tive to water.
Choose a spot for your IMPRESSA which protects the machine
U
against overheating. Ensure that the ventilation slots are not
covered.
To enjoy the perfect cup of coffee we recommend changing the
water every day.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
T Open the water tank cover.
T Remove the water tank and rinse it with cold water.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Close the water tank cover.
Filling the bean container
CAUTION
The bean container has an aroma preservation cover. This will ensure
that your coffee beans retain their aroma for longer.
Coffee beans which have been treated with additives (e.g. sugar),
preground coffee or freeze-dried coffee will damage the grinder.
T Only use untreated coffee beans to refill the bean container.
T Open the bean container cover and remove the aroma pres-
ervation cover.
T Remove any dirt or foreign objects from inside the bean
container.
9
1 Preparing and using for the first time
First-time use
J
WARNING
T Fill the bean container with coffee beans, then close the
aroma preservation cover and the bean container cover.
If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged or has a defective
mains cable.
Precondition: The water tank and bean container are full.
T Insert the mains plug into a power socket.
3 T Switch on the IMPRESSA using the power switch on the
right-hand side of the machine.
Q T Press the On/Off button to switch the IMPRESSA on.
The Rotary Switch lights up.
appears on the display.
g T Turn the Rotary Switch until the required language is dis-
played, for example
k T Press the Rotary Switch to confirm the language.
LANGUAGE ENGLISH.
SPRACHE DEUTSCH
CONFIRMED appears briefly on the display to confirm the
setting.
FILL SYSTEM / PRESS RINSE, the Maintenance
button c lights up.
T Place a receptacle under the cappuccino frother.
c T Press the Maintenance button.
SYSTEM FILLS, the system fills up with water. The oper-
ation stops automatically and
appears on the display.
WELCOME TO JURA
HEATING UP
PRESS RINSE, the Maintenance button c lights up.
T Place a receptacle under the coffee spout.
c T Press the Maintenance button.
MACHINE RINSING, the machine rinses. The operation
stops automatically.
play. Your IMPRESSA is ready for use.
COFFEE READY appears on the dis-
10
E The buttons for the products you can prepare are illuminated.
1 Preparing and using for the first time
Inserting and activating
the filter
Your IMPRESSA no longer has to be descaled if you are using the
CLARIS Blue filter cartridge.
E Perform the ‘inserting the filter’ operation without any inter-
ruptions. This will ensure that your IMPRESSA always produces
its best.
Precondition:
k T Press and hold the Rotary Switch until
g T Turn the Rotary Switch until
k T Press the Rotary Switch to enter the programme item.
COFFEE READY is displayed.
MAINTENANCE
appears on the display.
FILTER NO is displayed.
FILTER NO
g T Turn the Rotary Switch until FILTER YES is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
INSERT FILTER / PRESS RINSE, the Maintenance
button c lights up.
T Remove the filter cartridge extension from the Welcome
Pack.
T Fit the filter extension on top of a CLARIS Blue filter cartridge.
T Remove and empty the water tank.
T Open the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
T Close the filter holder. It will click into place audibly.
E After two months, the filter will cease to work. You can check
the elapsed time by referring to the date plate on the filter
holder in the water tank.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Place a receptacle (at least 500 ml) under the cappuccino
frother.
c T Press the Maintenance button.
FILTER RINSING, water flows out of the cappuccino
frother.
E You can interrupt rinsing of the filter at any time by pressing
any button. Press the Maintenance button c, to continue with
rinsing of the filter.
11
1 Preparing and using for the first time
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
500 ml. The machine heats up.
on the display. The filter is activated.
COFFEE READY appears
Determining and
adjusting the water
hardness
Determining the water
hardness
E If you are using the CLARIS Blue filter cartridge and have acti-
vated it in programming mode, you will not be able to adjust
the water hardness.
The harder the water is, the more frequently the IMPRESSA needs to
be descaled. It is therefore important to adjust the water hardness.
The water hardness can be adjusted on a continuous scale between
1° dH and 30° dH. It can also be deactivated, which means that the
IMPRESSA will not let you know when it has to be descaled.
You can find out what the water hardness is by using the Aquadur®
test strip supplied as standard.
T Hold the test strip briefly (for 1 second) under flowing water.
Shake off the water.
T Wait for about one minute.
T You will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the
description on the packaging.
You can now adjust the water hardness.
Adjusting the water
hardness
Example: Proceed as follows to change the water hardness from
16°dH to 25°dH.
Precondition:
k T Press and hold the Rotary Switch until
g T Turn the Rotary Switch until
COFFEE READY is displayed.
MAINTENANCE
appears on the display.
HARDNESS 16°dH is dis-
played.
12
1 Preparing and using for the first time
k T Press the Rotary Switch to enter the programme item.
16°dH n n n k k
g T Turn the Rotary Switch until 25°dH n n n n n is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
HARDNESS 25°dH
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY appears on the display.
Adjusting the grinder
CAUTION
You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.
If you adjust the consistency of grind when the grinder is not operating, the grinder adjustment switch could be damaged.
T Only adjust the consistency of grind when the grinder is run-
ning.
The consistency of grind setting is correct if the coffee flows regularly from the coffee spout. In addition a fine, thick crema forms.
Example: Proceed as follows to change the consistency of grind
during the preparation of an espresso.
T Open the storage compartment cover.
T Place a cup under the coffee spout.
i T Press the Espresso button.
The grinder starts up.
strength are displayed.
T Turn the grinder adjustment switch to the desired position
while the grinder is running.
The espresso is prepared and the consistency of grind is
adjusted.
T Close the storage compartment cover.
1 ESPRESSO and the coffee
13
2 Preparation
2 Preparation
E You can stop preparation of a speciality coffee, milk speciality
or hot water at any time. Just press any button.
E Before and during the grinding operation you can select
the coffee strength of individual products: extra-mild (
mild (
öö), normal (ööö), strong (öööö) or extra-strong
(
ццццц).
E During preparation, you can change the preset amount of
water by turning the Rotary Switch.
E You can follow the current status of preparation on the
progress bar.
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Products’).
ö),
Ristretto, espresso and
coffee
Preparing two speciality
coffees at the touch of a
button
14
Preparation of all specialty coffees (ristretto u, espresso i and
coffee o) follows this model.
Example: Proceed as follows to prepare one coffee.
T Place a cup under the coffee spout.
o T Press the Coffee button.
Preparation starts.
displayed. The preset amount of water for coffee flows into
the cup.
Preparation stops automatically and
on the display. Then
To prepare two cups of coffee: Place two cups under the coffee
spout. Press the Coffee button twice o (within 2 seconds), to start
coffee preparation.
1COFFEE and the coffee strength is
ENJOY appears briefly
COFFEE READY is displayed.
2 Preparation
Latte macchiato,
cappuccino
Your IMPRESSA can prepare a latte macchiato or cappuccino at the
touch of a button. There is no need to move the glass or cup.
Example: Proceed as follows to prepare one latte macchiato.
T Remove the protective cover from the cappuccino frother.
T Attach the milk pipe to the cappuccino frother. Use the long
pipe for a milk carton and the short pipe for a milk container.
T Insert the other end of the milk pipe into a milk carton or
connect it to a milk container.
T Place a glass under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the Milk
Foam position ü.
q T Press the Latte Macchiato button.
LATTE MAC. and the coffee strength is displayed.
LATTE MAC., the milk foam is prepared.
Preparation stops automatically when the preset amount of
milk is reached.
PAUSE
E There is a short interval while the hot milk separates from the
milk foam. This allows the typical layers of a latte macchiato
to form. You can choose the length of this interval in program-
ming mode (see Chapter 4 ‘Permanent settings in program-
ming mode – Products’).
LATTE MAC., coffee preparation starts. The preset
amount of water flows into the cup. Preparation stops automatically and
ENJOY appears briefly on the display. Then
COFFEE READY is displayed.
To make sure the cappuccino frother always works properly, rinse
and clean it regularly (see Chapter 5 ‘Maintenance – Rinsing the cappuccino frother’).
15
2 Preparation
Warm milk and milk
foam
Example: Proceed as follows to prepare milk foam.
T Remove the protective cover from the cappuccino frother.
T Attach the milk pipe to the cappuccino frother. Use the long
pipe for a milk carton and the short pipe for a milk container.
T Insert the other end of the milk pipe into a milk carton or
connect it to a milk container.
T Place a cup under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the Milk
Foam position ü.
E If you want to heat the milk turn the setting wheel of the cap-
puccino frother to the Milk position z.
z T Press the Milk button.
HEATING UP
As soon as the machine has heated up, COFFEE READY
appears.
z T Press the Milk button again.
MILK, the milk foam is prepared. Preparation stops auto-
matically when the preset amount of milk is reached.
COFFEE READY appears on the display.
16
To make sure the cappuccino frother always works properly, rinse
and clean it regularly (see Chapter 5 ‘Maintenance – Rinsing the cappuccino frother’).
2 Preparation
Ground coffee
You can choose to use a second coffee variety, for example decaffeinated coffee, with the filter funnel for ground coffee.
E Never add more than two level measuring spoons of ground
coffee.
E Use ground coffee which is not ground too finely. Very fine
coffee can block up the system so that the coffee only comes
out in drips.
E If you did not fill the machine with a sufficient amount of
ground coffee,
and the IMPRESSA stops the operation.
E The desired speciality coffee must be prepared within approx-
imately one minute after filling with the ground coffee. Oth-
erwise the IMPRESSA stops the operation and is once more
ready for use.
All speciality coffees with ground coffee are prepared following this
model.
Example: Proceed as follows to prepare an espresso using ground
coffee.
T Place an espresso cup under the coffee spout.
T Open the cover of the filler funnel for ground coffee.
NOT ENOUGH PRE-GROUND is displayed
FILL PRE-GROUND
T Place one level measuring spoon of ground coffee into the
filler funnel.
T Close the cover of the filler funnel.
COFFEE READY
i T Press the Espresso button.
Preparation will now begin. The preset amount of water for
espresso flows into the cup. Preparation stops automatically
and
ENJOY appears briefly on the display.
Then
COFFEE READY is displayed.
17
2 Preparation
Permanently setting the
amount of water for the
cup size
It is easy to make permanent settings for the amount of water for all
speciality coffees and hot water according to the cup size. Adjust the
amount once as shown in the following example. Every time you
prepare a drink in the future, this amount of water will be dispensed.
The permanent settings for adapting the amount of water to the cup
size for all speciality coffees and hot water follow this model.
Example: Proceed as follows to permanently set the amount of
water for one coffee.
Precondition:
T Place a cup under the coffee spout.
o T Press and hold the Coffee button.
COFFEE READY is displayed.
1COFFEE and the coffee strength is displayed.
o T Hold the Coffee button down until
appears.
T Release the Coffee button.
Preparation starts and the coffee flows into the cup.
T Press any button as soon as there is sufficient coffee in the
cup.
Preparation stops.
briefly on the display. The set amount of water for one coffee is permanently stored.
the display.
CONFIRMED and ENJOY appear
COFFEE READY appears on
ENOUGH COFFEE?
18
E You can alter this setting at any time by repeating the above
procedure.
E You can also permanently set the amount for all specialty cof-
fees and hot water in the programming mode (see Chapter 4
‘Permanent settings in programming mode – Products’).
2 Preparation
Hot water
J
CAUTION
To obtain a perfect water flow, use the hot-water nozzle. You can find
the hot-water nozzle under the cover of the storage compartment.
The following temperatures can be selected for preparing hot water:
LOW, NORMAL, X HIGH.
There is a danger of scalding from hot water splashes.
T Avoid direct contact with the skin.
T Carefully pull the cappuccino frother down and off.
T Open the storage compartment cover, take out the hot-
water nozzle and close the cover again.
T Attach the hot-water nozzle to the connector.
T Place a cup under the hot-water nozzle.
T Press the Hot Water button.
The temperature is displayed.
E By touching the Hot Water button several times (within
approximately 2 seconds) you can set the temperature to
your individual preference. This setting is not saved.
WATER, hot water flows into the cup. Preparation stops
automatically and
play.
COFFEE READY appears on the dis-
19
3 Daily operation
3 Daily operation
Switching on
Daily maintenance
When the IMPRESSA is switched on, it automatically prompts
you to perform the rinse operation. Start the rinse operation by
pressing the Maintenance button c. In programming mode you can
change this setting so that the machine starts the switch-on rinse
automatically (see Chapter 4 ‘Permanent settings in programming
mode – Rinses’).
Precondition: Your IMPRESSA is switched on at the power switch.
T Place a receptacle under the coffee spout.
Q T Press the On/Off button to switch the IMPRESSA on.
WELCOME TO JURA appears on the display.
HEATING UP
PRESS RINSE, the Maintenance button c lights up.
c T Press the Maintenance button.
MACHINE RINSING, the machine rinses.
The operation stops automatically and
appears on the display.
To ensure that you get many years of reliable service out of your
IMPRESSA and to guarantee the optimum coffee quality, the
machine requires daily maintenance.
T Pull out the drip tray.
T Empty the coffee grounds container and the drip tray. Rinse
them both with warm water.
T Dry the metal contacts on the back of the drip tray.
T Refit the coffee grounds container and the drip tray.
T Rinse the water tank with clean water.
T Dismantle and rinse the cappuccino frother (see Chapter 5
‘Maintenance – Rinsing the cappuccino frother’).
T Wipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfibre cloth).
COFFEE READY
20
3 Daily operation
Switching off
When you switch your IMPRESSA off, the spouts used to prepare a
speciality coffee or milk are rinsed.
T Place one receptacle under the coffee spout and another
under the cappuccino frother.
Q T Press the On/Off button.
MACHINE RINSING, the spouts used to prepare a spe-
ciality coffee or milk are rinsed. The operation stops automatically and your IMPRESSA is switched off.
E When the IMPRESSA is switched off with the On/Off button,
the machine consumes less than 0.1 W of standby energy. The
machine can be completely disconnected from the power
supply using the power switch.
21
4 Permanent settings in programming mode
4 Permanent settings in programming mode
You can make permanent settings in programming mode. You can
navigate through the programme items and permanently save the
required settings simply by turning and pressing the Rotary Switch.
You can make the following settings with the Rotary Switch:
Programme item Sub-item Explanation
MAINTENANCE
PRODUCTS SELECT PRODUCT
FILTER
HARDNESS
(only if filter is not
activated)
ECONOMY MODE
OFF AFTER
RINSES
RESET
INFORMATION
SETTINGS
CLEAN CAPPUCCINO,
RINSE MACHINE,
RINSE CAPPUCCINO,
CLEAN MACHINE,
DECALCIFY MACHINE
(only if filter is not activated),
CHANGE FILTER
(only if filter is activated)
YES, NO
HARDNESS INACTIVE,
1°dH – 30°dH
SAVE YES,
SAVE NO
15MIN.,
0.5H – 15H
INIT RINSE, CAPP
RINSE
PRODUCT,
ALL PRODUCTS,
RESET ALL
ML, OZ
T Select the desired maintenance
programme.
If no action is taken in this programme
item, programming mode is exited
automatically after approximately
5 seconds.
T Select your settings for speciality
coffees, milk specialities and hot water.
T Indicate whether you are operating your
IMPRESSA with or without a CLARIS Blue
filter cartridge.
T Adjust the water hardness.
T Select an energy-saving mode.
T Set the time after which the IMPRESSA
should switch off automatically.
T Change the settings for the switch-on
rinse and the cappuccino rinse.
T Reset the permanently set values of all
products to the factory settings.
T Keep track of all prepared speciality
coffees and milk specialities and view the
maintenance status.
T Select the unit for the amount of water.
22
4 Permanent settings in programming mode
Programme item Sub-item Explanation
SYMBOL
BRIGHTNESS
T Adjust the brightness of the symbols.
BRIGHTNESS
LANGUAGE
EXIT
T Select your language.
T Exit programming mode.
Products
Product Temperature Coffee strength Amount
1 ristretto,
1 espresso,
1 coffee
NORMAL, HIGH ö (extra-mild),
In the programme item
tings for all speciality coffees and hot water. The following permanent settings can be made:
öö (mild),
ööö (normal),
PRODUCTS you can make individual set-
Amount of water:
25ML – 240ML
öööö (strong),
ццццц (extra-strong)
2 ristretti,
2 espressi,
2 coffees
Latte macchiato,
cappuccino
Milk – – 3SEC – 120SEC
Hot water LOW, NORMAL,
NORMAL, HIGH – Amount of water:
25ML – 240ML
(per cup)
NORMAL, HIGH ö (extra-mild),
öö (mild),
ööö (normal),
öööö (strong),
ццццц (extra-strong)
– 25ML – 450ML
Amount of milk:
3SEC – 120SEC
Interval: 0SEC – 60SEC
Amount of water:
25ML – 240ML
X HIGH
Permanent settings in programming mode always follow the same
model.
Example: Proceed as follows to change the amount of milk for a
latte macchiato from
from
45ML to 40ML and the interval from 30SEC to 20SEC.
Precondition:
k T Press and hold the Rotary Switch until
appears.
16SEC to 20SEC, the amount of water
COFFEE READY is displayed.
MAINTENANCE
23
4 Permanent settings in programming mode
g T Turn the Rotary Switch until PRODUCTS is displayed.
k T Press the Rotary Switch to enter the programme item.
q T Press the Latte Macchiato button.
k T Press the Rotary Switch to enter the programme item.
g T Turn the Rotary Switch until COFFEE 40ML is displayed.
k T Press the Rotary Switch to confirm the setting.
g T Turn the Rotary Switch until MILK 16SEC is displayed.
k T Press the Rotary Switch to enter the programme item.
k T Press the Rotary Switch to confirm the setting.
g T Turn the Rotary Switch until PAUSE 30SEC is displayed.
k T Press the Rotary Switch to enter the programme item.
g T Turn the Rotary Switch until PAUSE 20SEC is displayed.
k T Press the Rotary Switch to confirm the setting.
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit the programme item.
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit the programme item.
g T Turn the Rotary Switch until EXIT is displayed.
SELECT PRODUCT
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
E To change the setting for a double product, press the corre-
sponding symbol twice within 2 seconds.
COFFEE 45ML
COFFEE 45ML
CONFIRMED appears briefly on the display.
COFFEE 40ML
MILK 16SEC
T Turn the Rotary Switch until MILK 20SEC is displayed.
CONFIRMED appears briefly on the display.
MILK 20SEC
PAUSE 30SEC
CONFIRMED appears briefly on the display.
PAUSE 20SEC
SELECT PRODUCT
PRODUCTS
24
4 Permanent settings in programming mode
k T Press the Rotary Switch to exit the programme item.
COFFEE READY
Energy-saving mode
In the programme item ECONOMY MODE you can permanently set
an energy-saving mode (Energy Save Mode, E.S.M.
SAVE NO
U
All speciality coffees, speciality coffees with milk and hot
U
water can be prepared without having to wait.
Before milk preparation, the machine heats up.
U
SAVE YES (Energy saving of up to 40%)
U
Soon after the last preparation, the IMPRESSA stops heating
U
up. As soon as the energy-saving temperature is reached,
this is indicated in the display by the message
©
):
ENERGY
ON – this may last several minutes.
The machine starts up before coffee, hot water or milk prep-
U
aration.
Example: Proceed as follows to change the energy-saving mode
from
SAVE NO to SAVE YES.
Precondition:
k T Press and hold the Rotary Switch until
g T Turn the Rotary Switch until
k T Press the Rotary Switch to enter the programme item.
COFFEE READY is displayed.
MAINTENANCE
appears.
ECONOMY MODE - is dis-
played.
SAVE NO
g T Turn the Rotary Switch until SAVE YES is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
ECONOMY MODEp
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
25
4 Permanent settings in programming mode
Automatic switch-off
By instructing your IMPRESSA to automatically switch itself off, you
can cut down your energy consumption. If this function is activated,
your IMPRESSA switches off automatically after the preset time
following the last action on the machine.
You can set the automatic switch-off time to 15 minutes or
0.5–15 hours.
Example: Proceed as follows to change the automatic switch-off
from
2H to 15MIN..
Precondition:
k T Press and hold the Rotary Switch until
g T Turn the Rotary Switch until
k T Press the Rotary Switch to enter the programme item.
g T Turn the Rotary Switch until OFF AFTER 15MIN. is dis-
k T Press the Rotary Switch to confirm the setting.
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY is displayed.
MAINTENANCE
appears.
OFF AFTER 2H is displayed.
OFF AFTER 2H
played.
CONFIRMED appears briefly on the display.
OFF AFTER 15MIN.
COFFEE READY
Rinses
26
In the programme item RINSES you can make the following
settings:
INIT RINSE MANUAL
U
The switch-on rinse must be started manually.
U
INIT RINSE AUTO
U
The switch-on rinse is started automatically.
U
CAPP RINSE AFTER10'
U
You are prompted to perform a cappuccino rinse 10 minutes
U
after preparation of a speciality coffee with milk.
CAPP RINSE NOW
U
You are prompted to perform a cappuccino rinse immedi-
U
ately after preparation of a speciality coffee with milk.
4 Permanent settings in programming mode
Example: Proceed as follows to make the machine prompt you to
perform the cappuccino rinse immediately after preparing a speciality coffee with milk.
Precondition:
k T Press and hold the Rotary Switch until
g T Turn the Rotary Switch until
k T Press the Rotary Switch to enter the programme item.
COFFEE READY is displayed.
MAINTENANCE
appears.
RINSES is displayed.
INIT RINSE MANUAL
g T Turn the Rotary Switch until CAPP RINSE AFTER10'
is displayed.
k T Press the Rotary Switch to enter the programme item.
CAPP RINSE AFTER10'
g T Turn the Rotary Switch until CAPP RINSE NOW is dis-
played.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
CAPP RINSE NOW
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch.
RINSES
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
Restore factory settings
In the programme item RESET you can reset various settings to
their factory settings:
PRODUCT
U
The settings (amount of water, aroma, temperature etc.) for
U
any product can be reset individually to the factory settings.
The corresponding double product is also reset to the factory settings at the same time.
ALL PRODUCTS
U
The settings (amount of water, aroma, temperature etc.) for
U
all products are reset to the factory settings.
RESET ALL
U
All customer settings (apart from the ‘filter’) are reset to
U
factory settings. Your IMPRESSA then switches off.
27
4 Permanent settings in programming mode
Example: Proceed as follows to reset the values for ‘Espresso’ to the
factory settings.
Precondition:
k T Press and hold the Rotary Switch until
g T Turn the Rotary Switch until
k T Press the Rotary Switch to enter the programme item.
i T Press the Espresso button.
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit the programme item.
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY is displayed.
MAINTENANCE
appears.
RESET is displayed.
PRODUCT
CONFIRMED appears briefly on the display. The settings
for ‘Espresso’ are reset to the factory settings.
PRODUCT
RESET
COFFEE READY
Viewing information and
maintenance status
28
In the programme item INFORMATION you can view the following information:
Number of prepared coffee speciality coffees, speciality cof-
U
fees with milk and hot water
Maintenance status and number of maintenance programmes
U
performed (cleaning, descaling, changing the filter)
Number of cappuccino frother cleaning operations performed
U
Software version
U
Precondition:
k T Press and hold the Rotary Switch until
g T Turn the Rotary Switch until
k T Press the Rotary Switch to enter the programme item.
COFFEE READY is displayed.
MAINTENANCE
appears.
INFORMATION is displayed.
TOTAL, the total number of prepared speciality coffees
and milk specialities is displayed.
g T Turn the Rotary Switch to view additional information.
4 Permanent settings in programming mode
E The maintenance status can also be displayed in addition to
the number of performed maintenance programmes. The bar
shows the current maintenance status. When the bar is com-
pletely filled, your IMPRESSA will request the respective main-
tenance programme.
k T Press the Rotary Switch to exit the programme item.
INFORMATION
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
Unit for amount of water
Brightness of symbols
You can change the unit for the amount of water from ‘ml’ to ‘oz’.
Example: Proceed as follows to change the unit for the amount of
water from
Precondition:
k T Press and hold the Rotary Switch until
g T Turn the Rotary Switch until
k T Press the Rotary Switch to enter the programme item.
ML to OZ.
COFFEE READY is displayed.
MAINTENANCE
appears.
SETTINGS ML is displayed.
SETTINGS ML
g T Turn the Rotary Switch until SETTINGS OZ is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
SETTINGS OZ
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
You can individually adjust the brightness of the symbols.
Precondition:
k T Press and hold the Rotary Switch until
g T Turn the Rotary Switch until
k T Press the Rotary Switch to enter the programme item.
COFFEE READY is displayed.
MAINTENANCE
appears.
SYMBOL BRIGHTNESS is
displayed.
BRIGHTNESS
29
4 Permanent settings in programming mode
g T Turn the Rotary Switch to set the required brightness of the
k T Press the Rotary Switch to confirm the setting.
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
symbols.
CONFIRMED appears briefly on the display.
SYMBOL BRIGHTNESS
COFFEE READY
Language
In this programme item you can set the language used by your
IMPRESSA.
Example: Proceed as follows to change the language from
ENGLISH to DEUTSCH.
Precondition:
k T Press and hold the Rotary Switch until
g T Turn the Rotary Switch until
k T Press the Rotary Switch to enter the programme item.
COFFEE READY is displayed.
MAINTENANCE
appears.
LANGUAGE ENGLISH is
displayed.
LANGUAGE ENGLISH
g T Turn the Rotary Switch until SPRACHE DEUTSCH is dis-
played.
k T Press the Rotary Switch to confirm the setting.
GESPEICHERT appears briefly on the display.
SPRACHE DEUTSCH
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
BITTE WÄHLEN
30
5 Maintenance
5 Maintenance
Your IMPRESSA has the following integrated maintenance programmes:
Cleaning the cappuccino frother (CLEAN CAPPUCCINO)
U
Rinsing the cappuccino frother (RINSE CAPPUCCINO)
U
Changing the filter (CHANGE FILTER)
U
Cleaning the machine (CLEAN MACHINE)
U
Rinsing the machine (RINSE MACHINE)
U
Descaling the machine (DECALCIFY MACHINE)
U
E Clean or descale the machine or change the filter when the
display prompts you to do so.
Rinsing the machine
You can initiate the rinse operation manually at any time.
Precondition:
T Place a receptacle under the coffee spout.
k T Press and hold the Rotary Switch until
k T Press the Rotary Switch to enter the programme item.
g T Turn the Rotary Switch until RINSE MACHINE is dis-
k T Press the Rotary Switch to initiate the rinse operation.
COFFEE READY is displayed.
MAINTENANCE
appears.
CLEAN CAPPUCCINO
played.
MACHINE RINSING
The rinse stops automatically and COFFEE READY
appears on the display.
31
5 Maintenance
Rinsing the cappuccino
frother
Cleaning the cappuccino
frother
CAUTION
After each milk preparation, the IMPRESSA prompts you to run a
cappuccino rinse.
Precondition:
displayed and the Maintenance button c lights up.
T Place a receptacle under the cappuccino frother.
c T Press the Maintenance button.
COFFEE READY / RINSE CAPPUCCINO is
CAPPU. RINSING, the cappuccino frother is rinsed.
The operation stops automatically and
appears on the display.
To ensure that the cappuccino frother always works properly, you
should clean it daily when you have been preparing milk. Your
IMPRESSA will not prompt you to clean the cappuccino frother.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E JURA Cappuccino Cleaner is available from stockists.
Precondition:
k T Press and hold the Rotary Switch until
k T Press the Rotary Switch to enter the programme item.
COFFEE READY is displayed.
appears.
COFFEE READY
MAINTENANCE
CLEAN CAPPUCCINO
k T Press the Rotary Switch.
CLEANER FOR CAPPU.
T Pour 250 ml of fresh water into a receptacle and add one
capful (max. 15 ml) of Cappuccino Cleaner.
T Immerse the milk pipe in the receptacle.
T Turn the setting wheel of the cappuccino frother to the Milk
Foam ü or Milk z position.
32
Dismantling and rinsing
the cappuccino frother
5 Maintenance
T Place another receptacle under the cappuccino frother.
c T Press the Maintenance button.
CAPPUCCINO CLEANS, the cappuccino frother and the
pipe are cleaned.
WATER FOR CAPPUCCINO
T Rinse the receptacle thoroughly, fill it with 250 ml of fresh
water and immerse the milk pipe in the water.
T Empty the other receptacle and place it under the cappuc-
cino frother again.
c T Press the Maintenance button.
CAPPUCCINO CLEANS, the cappuccino frother and the
pipe are rinsed with fresh water.
COFFEE READY appears on the display.
T Carefully pull the cappuccino frother down and off.
T Dismantle the cappuccino frother into its individual parts.
T Rinse all parts of the cappuccino frother thoroughly under
running water.
T Reassemble the cappuccino frother.
Changing the filter
E Ensure that all individual parts are correctly and firmly con-
nected to ensure correct operation of the cappuccino frother.
T Firmly attach it to the connector.
E After 50 litres of water have flowed through, the filter will
cease to work. Your IMPRESSA will automatically prompt you
to change the filter.
E After two months, the filter will cease to work. You can check
the elapsed time by referring to the date plate on the filter
holder in the water tank.
E If the CLARIS Blue filter cartridge is not activated in program-
ming mode, you will not be prompted to change the filter.
33
5 Maintenance
Precondition: COFFEE READY / CHANGE FILTER is dis-
played and the Maintenance button c lights up.
c T Press the Maintenance button.
DURATION 2MIN. / START YES
E If you do not want to start changing the filter just yet, turn the
Rotary Switch until
Switch to exit the maintenance programme. The prompt to
‘change the filter’ remains active.
c T Press the Maintenance button.
START NO is displayed. Press the Rotary
CHANGE FILTER / PRESS RINSE
T Remove and empty the water tank.
T Open the filter holder and remove the old CLARIS Blue filter
cartridge and filter extension.
T Fit the filter extension on top of a new filter cartridge.
T Insert the filter cartridge into the water tank, exerting slight
pressure.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
34
T Place a receptacle (at least 500 ml) under the cappuccino
frother.
T Turn the setting wheel of the cappuccino frother to the
Steam position n.
c T Press the Maintenance button.
FILTER RINSING, water flows out of the cappuccino
frother.
E You can interrupt rinsing of the filter at any time by pressing
any button. Press the Maintenance button c, to continue with
rinsing of the filter.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
500 ml. The IMPRESSA heats up and is once more ready for
use.
5 Maintenance
Cleaning the machine
CAUTION
After 200 preparations or 80 switch-on rinses, the IMPRESSA will
prompt you to clean it.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E The cleaning programme lasts approximately 20 minutes.
E Do not interrupt the cleaning programme. The quality of
cleaning will be impaired if you do so.
E JURA cleaning tablets are available from stockists.
Precondition:
played and the Maintenance button c lights up.
c T Press the Maintenance button.
COFFEE READY / CLEAN MACHINE is dis-
DURATION 20MIN. / START YES
E If you do not want to start cleaning just yet, turn the Rotary
Switch until
to exit the maintenance programme. The prompt to ‘clean the
machine’ remains active.
c T Press the Maintenance button.
START NO is displayed. Press the Rotary Switch
EMPTY TRAY
T Empty the drip tray and coffee grounds container and put
them back into the machine.
PRESS RINSE, the Maintenance button c lights up.
T Place one receptacle under the coffee spout and another
under the cappuccino frother.
c T Press the Maintenance button.
CLEANS, water flows out of the coffee spout.
The operation is interrupted,
T Open the cover of the filler funnel for ground coffee.
ADD TABLET.
35
5 Maintenance
T Insert a JURA cleaning tablet into the filler funnel.
T Close the cover of the filler funnel.
ADD TABLET / PRESS RINSE, the Maintenance but-
ton c lights up.
c T Press the Maintenance button.
CLEANS, water flows repeatedly out of the coffee spout
and the cappuccino frother.
The operation is interrupted,
T Empty the drip tray and coffee grounds container and put
them back into the machine.
Cleaning is now complete. The IMPRESSA heats up and is
once more ready for use.
EMPTY TRAY.
Descaling the machine
J
CAUTION
CAUTION
CAUTION
CAUTION
The IMPRESSA builds up deposits of limescale over time and automatically prompts you to descale it when necessary. The degree of
calcification depends on the hardness of your water.
If the descaling agent comes into contact with the skin or eyes, this
can cause irritation.
T Avoid contact with the skin or eyes.
T Rinse off descaling agent with clean water. Should you get any
descaling agent in your eye, see a doctor.
If the wrong descaling agent is used, the machine could be damaged and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
If the descaling operation is interrupted, there may be damage to
the machine.
T Allow the descaling programme to run to the end.
If the descaling agent comes into contact with sensitive surfaces
(e.g. marble), damage cannot be ruled out.
T Clean up any splashes immediately.
E The descaling programme lasts approximately 45 minutes.
E JURA descaling tablets are available from stockists.
E If you use a CLARIS Blue filter cartridge and this is activated,
you will not be prompted to descale.
36
5 Maintenance
Precondition: COFFEE READY / DECALCIFY MACHINE is
displayed and the Maintenance button c lights up.
c T Press the Maintenance button.
DURATION 45MIN. / START YES
E If you do not want to start descaling just yet, turn the Rotary
Switch until
to exit the maintenance programme. The prompt to ‘descale
the machine’ remains active.
c T Press the Maintenance button.
START NO is displayed. Press the Rotary Switch
EMPTY TRAY
T Empty the drip tray and coffee grounds container and put
them back into the machine.
SOLVENT IN TANK
T Remove and empty the water tank.
T Completely dissolve the contents of one blister (three JURA
descaling tablets) in a receptacle holding 500 ml of water.
This may take several minutes.
T Pour the solution into the empty water tank and inser t it into
the machine.
SOLVENT IN TANK / PRESS RINSE, the Mainte-
nance button c lights up.
T Remove the cappuccino frother.
T Place a receptacle (at least 500 ml) under the connector of
the cappuccino frother.
c T Press the Maintenance button.
DECALCS
Water flows repeatedly out of the connector of the cappuc-
cino frother. The Maintenance button c flashes during the
descaling operation.
The operation stops automatically,
T Empty the receptacle under the connector of the cappuc-
cino frother.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
EMPTY TRAY.
RINSE WATER TANK / FILL WATER TANK
T Remove the water tank and rinse it thoroughly.
37
5 Maintenance
T Fill the water tank with fresh, cold water and reinsert the
tank.
PRESS RINSE, the Maintenance button c lights up.
T Refit the cappuccino frother.
T Place a receptacle under the cappuccino frother and another
under the coffee spout.
c T Press the Maintenance button.
DECALCS, water flows out of the cappuccino frother and
the coffee spout.
HEATING UP, MACHINE RINSING, water flows out
of the coffee spout.
The operation stops automatically,
T Empty the drip tray and coffee grounds container and put
them back into the machine.
Descaling is now complete. The IMPRESSA is once more
ready for use.
E If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
EMPTY TRAY.
Cleaning the bean
container
38
Coffee beans may be covered with a slight oil film which remains on
the walls of the bean container. These traces may negatively affect
the coffee result. For this reason clean the bean container from time
to time.
Precondition:
Q T Switch the machine off with the On/Off button.
3 T Switch the machine off at the power switch.
T Open the bean container cover and remove the aroma pres-
T Clean the bean container with a soft, dry cloth.
T Fill the bean container with coffee beans, then close the
COFFEE READY / FILL BEANS is displayed.
ervation cover.
aroma preservation cover and the bean container cover.
5 Maintenance
Descaling the water tank
Limescale deposits may form in the water tank. To ensure correct
function of the machine, descale the water tank from time to time.
T Remove the water tank.
T If you use a CLARIS Blue filter cartridge, remove this.
T Descale the tank with a mild conventional descaling agent
in accordance with the manufacturer's instructions.
T Rinse out the water tank thoroughly.
T If you use a CLARIS Blue filter cartridge, insert this again.
T Fill the water tank with fresh, cold water and reinsert the
tank.
39
6 Display messages
6 Display messages
Message Cause/Result Action
FILL WATER TANK
EMPTY GROUNDS
EMPTY TRAY
TRAY MISSING
PRESS RINSE
FILL BEANS
COFFEE READY /
RINSE CAPPUCCINO
COFFEE READY /
CLEAN MACHINE or
COFFEE READY /
CLEAN NOW
The water tank is empty. You
cannot prepare any products.
The coffee grounds container is
full. You cannot prepare any
speciality coffees, but you can
prepare hot water and milk.
The drip tray is full. You cannot
prepare any products.
The drip tray is not inserted
correctly or is not inserted at
all. You cannot prepare any
products.
The IMPRESSA is prompting
you to perform a rinse or
continue a maintenance
programme that was already
started.
The bean container is
empty. You cannot prepare any
speciality coffees, but you can
prepare hot water and milk.
The IMPRESSA requests a
cappuccino rinse.
The IMPRESSA is prompting
you to clean it.
T Fill the water tank (see
Chapter 1 ‘Preparing and using
for the first time – Filling the
water tank’).
T Empty the coffee grounds
container and the drip tray (see
Chapter 3 ‘Daily operation –
Daily maintenance’).
T Empty the drip tray.
T Clean and dry the metal
contacts on the back of the drip
tray.
T Fit the drip tray.
T Press the Maintenance button
to start the rinse or to continue
the maintenance programme.
T Fill the bean container (see
Chapter 1 ‘Preparing and using
for the first time – Filling the
bean container’).
T Press the Maintenance button
to start the cappuccino rinse.
T Perform cleaning (see
Chapter 5 ‘Maintenance –
Cleaning the machine’).
40
Message Cause/Result Action
COFFEE READY /
DECALCIFY MACHINE
or
COFFEE READY /
The IMPRESSA is prompting
you to descale it.
T Perform descaling (see
Chapter 5 ‘Maintenance –
Descaling the machine ’).
DECALCIFY NOW
COFFEE READY /
CHANGE FILTER or
COFFEE READY /
CHANGE NOW
NOT ENOUGH
PRE-GROUND
FILL SYSTEM /
PRESS RINSE
The filter cartridge no longer
works.
There is insufficient ground
coffee in the machine; the
IMPRESSA stops the operation.
The system must be filled with
water. You cannot prepare any
products.
T Replace the CLARIS Blue filter
cartridge (see Chapter 5
‘Maintenance – Changing the
filter’).
T The next time you prepare a
beverage, add more preground
coffee (see Chapter 2 ‘Preparation – Ground coffee’).
T Place a receptacle under the
cappuccino frother and press
the Maintenance button c.
6 Display messages
41
7 Troubleshooting
7 Troubleshooting
Problem Cause/Result Action
When preparing a latte
macchiato, the typical
three layers do not form.
Insufficient foam is
produced when the milk
is frothed or milk sprays
from the cappuccino
frother.
Coffee only comes out
in drips when it is being
prepared.
Water hardness cannot
be adjusted.
FILL BEANS is not
displayed although the
bean container is empty.
EMPTY TRAY is
always displayed.
FILL WATER TANK
is displayed although
the water tank is full.
The cappuccino frother is
dirty.
Coffee or ground coffee
has been ground too
finely and is blocking the
system. The same filter
cartridge may have been
used several times or the
water hardness set
incorrectly in the programming mode.
The CLARIS Blue filter
cartridge is activated.
The bean monitor is dirty.
The metal contacts of the
drip tray are dirty or wet.
The water tank float is
trapped.
–
T Turn the setting wheel of the cappuccino to the far right and the Milk Foam
position ü.
T Change the length of the interval to at
least 30 seconds (see Chapter 4 ‘Permanent settings in programming mode –
Products’) in the programming mode.
T Rinse and clean the cappuccino
frother.
T Put the grinder on a coarser setting or
use coarser ground coffee (see Chapter 1
‘Preparing and using for the first time –
Adjusting the grinder’).
T Perform descaling (see Chapter 5
‘Maintenance – Descaling the machine’).
T Deactivate the filter cartridge in
programming mode.
T Clean the bean container (see
Chapter 5 ‘Maintenance – Cleaning the
bean container’).
T Clean and dry the metal contacts on
the back of the drip tray.
T Descale the water tank (see Chapter 5
‘Maintenance – Descaling the water
tank’).
42
Problem Cause/Result Action
Little or no water or
steam comes out of
the cappuccino frother.
The pump is very quiet.
Grinder is making a
very loud noise.
ERROR2 is displayed. If the machine was
ERROR
Other
messages are
displayed.
The connector of the
cappuccino frother may
be blocked by milk
residues or limescale
fragments loosened
during descaling.
There are foreign objects
in the grinder.
exposed to the cold for
a long period of time,
heating is disabled for
safety reasons.
–
T Remove the cappuccino frother.
T Unscrew the black connector with the
aid of the hexagonal hole on the
measuring spoon for ground coffee.
T Clean the connector thoroughly.
T Screw the connector back on by hand.
T Carefully tighten it using the hexagonal
hole on the measuring spoon, turning by
no more than a quarter of a rotation.
T Contact customer support in your
country (see Chapter 11 ‘JURA contact
details / Legal information’).
T Warm the machine at room
temperature.
T Switch the IMPRESSA off at the power
switch. Contact customer support in
your country (see Chapter 11 ‘JURA
contact details / Legal information’).
7 Troubleshooting
E If you were unable to solve the problem, contact customer
support in your country (see Chapter 11 ‘JURA contact details /
Legal information’).
43
8 Transport and environmentally friendly disposal
8 Transport and environmentally friendly disposal
Transport / Emptying the
system
Disposal
In order to protect the IMPRESSA from frost during transport, the
system must be emptied.
Precondition: COFFEE READY is displayed.
T Carefully pull the cappuccino frother down and off.
T Place a receptacle under the connector of the cappuccino
frother.
z T Press the Milk button.
HEATING UP
As soon as the machine has heated up, COFFEE READY
appears.
z T Press the Milk button again.
MILK, hot steam emerges from the connector.
T Remove and empty the water tank.
g T Turn the Rotary Switch until
Steam will continue to be discharged from the connector
until the system is empty.
MILK 60SEC is displayed.
FILL WATER TANK
Q T Press the On/Off button.
The IMPRESSA is switched off.
Please dispose of old machines in an environmentally neutral way.
H
44
Old machines contain valuable, recyclable materials which should
be recycled. Please therefore dispose of old machines via suitable
collection systems.
9 Technical data
9 Technical data
Voltage 220–240 V ~, 50 Hz
Power 1450 W
Safety test
Energy consumption
Energy consumption
Pump pressure Static, max. 15 bar
Holding capacity of water tank 2.1 l
Holding capacity of bean container 250 g
Holding capacity of coffee grounds
container
Cable length Approx. 1.1 m
Weight 10.9 kg
Dimensions (W × H × D) 28.5 × 34.2 × 43.3 cm
SAVE YES Approx. 5 Wh
SAVE NO Approx. 12 Wh
S
Max. 16 portions
45
10 Index
10 Index
A
Addresses 48
Automatic switch-off 26
B
Bean container
Bean container with aroma preservation
cover 4
Cleaning 38
Filling 9
Bus bar
Technical data 45
Button
Cappuccino button 5
Coffee button 5
Espresso button 5
Hot Water button 5
Latte Macchiato button 5
Maintenance button 5
Milk button 5
On/Off button 5
Ristretto button 5
C
Cappuccino 15
Cappuccino frother
Cleaning 32
Rinsing 32
CLARIS Blue filter cartridge
Changing 33
Inserting and activating the filter 11
Cleaning
Bean container 38
Cappuccino frother 32
Machine 35
Coffee 14
Coffee grounds container 4
Coffee spout
Height- and width-adjustable coffee
spout 4
Consistency of grind
Adjusting the grinder 13
Grinder adjustment switch 4
Contact details 48
Cover
Bean container 4
Cup platform 4
Customer support 48
D
Degree of water hardness 12
Descaling
Machine 36
Water tank 39
Determining and adjusting the water
hardness 12
Display 5
Display messages 40
Drip tray 4
E
Emptying the system 44
Energy-saving mode 25
Errors
Troubleshooting 42
Espresso 14
F
Factory settings
Restore factory settings 27
Filler funnel
Filler funnel for ground coffee 4
Filling
Bean container 9
Water tank 9
Filter
Changing 33
Inserting and activating the filter 11
First-time use 10
Frother
Cappuccino frother 4
G
Ground coffee 16
H
Hotline 48
Hot water 18
Hot-water nozzle 4
46
10 Index
I
Instant coffee
Ground coffee 16
Internet 9
J
JURA
Contact details 48
Internet 9
L
Language 30
Latte macchiato 15
M
Machine
Cleaning 35
Descaling 36
Rinsing 31
Setting up 9
Switching off 21
Switching on 20
Mains cable 4
Maintenance
Daily maintenance 20
Maintenance 31
Messages, display 40
Milk foam 16
Milk, warm 16
P
Permanently setting the water for the
cup size 17
Permanent settings in programming
mode 22
Power switch 4
Preparation 14, 15
Cappuccino 15
Coffee 14
Espresso 14
Ground coffee 16
Latte macchiato 15
Milk 16
Ristretto 14
Problems
Troubleshooting 42
Programming mode 22
Automatic switch-off 26
Brightness of symbols 29
Energy-saving mode 25
Language 30
Products 23
Restore factory settings 27
Rinses 26
Unit for amount of water 29
Proper use 6
R
Rinses 26
Rinsing
Cappuccino frother 32
Machine 31
Ristretto 14
Rotary Switch 5
S
Safety 6
Safety information 6
Settings
Permanent settings in programming
mode 22
Setting up
Setting up the machine 9
Short operating instructions 9
Switching off 21
Switching on 20
Switch-off
Automatic switch-off 26
Symbol description 3
T
Technical data 45
Telephone 48
Troubleshooting 42
U
Unit for amount of water 29
Use, First-time 10
W
Warm milk 16
Water tank 4
Descaling 39
Filling 9
Website 9
47
Art. 69422/J9.2/en/201009
11 JURA contact details / Legal information
11 JURA contact details / Legal information
JURA Elektroapparate AG
Kaffeeweltstrasse 10
CH-4626 Niederbuchsiten
Tel. +41 (0)62 38 98 233
@ You will find additional contact details for your country at
www.jura.com.
Directives
Technical changes
Feedback
Copyright
The machine complies with the following directives:
2006/95/EC – Low Voltage Directive
U
2004/108/EC – Electromagnetic Compatibility
U
2009/125/EC – Ecodesign
U
We reserve the right to make technical changes. The diagrams used
in these instructions for use are for illustration purposes only and do
not represent the original colours of the machine. Some details of
your IMPRESSA may vary.
Your opinion is important to us! Use the contact link at
www.jura.com.
The instructions for use contain information which is protected by
copyright. It is not permitted to photocopy these instructions for use
or translate them into another language without the prior written
consent of JURA Elektroapparate AG.
48
Loading...