Jura IMPRESSA J7 User Manual
IMPRESSA J7 – Quick Reference Guide
The ‘IMPRESSA J7 Instructions for Use’ together with these
short instructions ‘IMPRESSA J7 – Quick Reference Guide’
has been awarded the seal of approval by the independent
German Technical Inspection Agency, TÜV SÜD, due to its
easy-to-understand style, its thoroughness and coverage
of safety aspects.
IMPRESSA J7 – Quick Reference Guide
These short instructions do not replace the ‘IMPRESSA J7 Instructions for Use’. Make sure you read and observe the safety information and warnings first in order to avoid hazards.
Rinsing the machine Rinsing the machine
Inserting and
Inserting and
activating the filter
activating the filter
You can initiate the rinse operation manually at any time.
Precondition:
k T Keep the Rotary Switch pressed until
k T Press the Rotary Switch to enter the programme item.
READY is displayed.
T
Place a receptacle under the coffee spout.
RINSE appears.
RINSE
k T Press the Rotary Switch to initiate the rinse operation.
RINSING, water flows out of the coffee spout.
Rinsing stops automatically and your IMPRESSA is then
ready for use.
Your IMPRESSA no longer has to be descaled if you are using CLARIS
Blue filter cartridges.
Perform the ‘Inserting the filter’ operation without interrup-
E
tions. This will ensure that your IMPRESSA always produces its
best.
Precondition:
k T Keep the Rotary Switch pressed until
g T Turn the Rotary Switch until
k T Press the Rotary Switch to enter the programme item.
READY is displayed.
RINSE appears on
the display.
FILTER - is displayed.
NO -
g T Turn the Rotary Switch until YES w is displayed.
k T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display to confirm the setting.
INSERT, the maintenance button c lights up.
Remove the filter cartridge extension from the Welcome Pack.
T
Fit the extension on top of an original CLARIS Blue filter
T
cartridge.
Remove and empty the water tank.
T
2
IMPRESSA J7 – Quick Reference Guide
T
Lift the cartridge holder and insert the filter cartridge into
the water tank, exerting slight pressure.
T
Close the cartridge holder. It will click into place audibly.
After two months, the filter will cease to work. You can check
E
the elapsed time by referring to the date plate on the cartridge
holder in the water tank.
Fill the water tank with fresh, cold water and reinsert the
T
tank.
Place a receptacle (at least 500 ml) under the frother.
T
If you are using the Professional Cappuccino Frother, set the
E
selector switch of the frother to the steam position n.
c T Press the maintenance button.
FILTER RINSING. Water flows out of the frother.
E
You can interrupt rinsing of the filter at any time by pressing
the maintenance button c.
E
The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
500 ml.
HEATIN G appears on the display, then READY is
displayed. The filter is now activated.
Changing the filter Changing the filter
After 50 litres of water have flowed through, the filter will
E
cease to work. Your IMPRESSA will automatically prompt you
to change the filter.
After two months, the filter will cease to work. You can check
E
the elapsed time by referring to the date plate on the cartridge
holder in the water tank.
If the CLARIS Blue filter cartridge is not activated, you will not
E
be prompted to change the filter.
3
IMPRESSA J7 – Quick Reference Guide
Proceed as follows to change the CLARIS Blue filter cartridge when
prompted to do so by your IMPRESSA.
Precondition:
nance button c lights up.
c T Press the maintenance button.
READY / FILTER is displayed and the mainte-
CHANGE
T
Remove and empty the water tank.
T
Lift the cartridge holder.
T
Take out the old filter cartridge and the extension.
T
Fit the extension on top of a new filter cartridge.
T
Insert the filter cartridge into the water tank, exerting slight
pressure.
T
Close the cartridge holder. It will click into place audibly.
T
Fill the water tank with fresh, cold water and reinsert the
tank.
T
Place a receptacle (at least 500 ml) under the frother.
E
If you are using the Professional Cappuccino Frother, set the
selector switch of the frother to the steam position n.
c T Press the maintenance button.
FILTER RINSING, water will flow out of the frother.
E
You can interrupt rinsing of the filter at any time. To this purpose press the maintenance button c.
The water may be slightly discoloured. This is not harmful to
E
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
500 ml. The IMPRESSA heats up and is once more ready for
use.
4
Loading...