Jura IMPRESSA J5 Instruction Manual

The IMPRESSA J5 Manual

The ‘IMPRESSA Manual’ has been awarded the seal of approval by the independent German T echnical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects.

Table of contents

Your IMPRESSA J5

IMPORTANT SAFEGUARDS 4 Control elements and accessories Proper use

For your safety ............................................................................................................................................10

The IMPRESSA J5 Manual 13

Symbol description ....................................................................................................................................14

1 IMPRESSA J5 – Perfect Enjoyment, Perfect Aesthetics 15

Coffee that fulfils your wildest dreams ..................................................................................................15

Perfect Enjoyment, Perfect Aesthetics ................................................................................................... 15

JURA on the Internet ..................................................................................................................................16

Knowledge Builder .....................................................................................................................................16

2 Preparing and using your IMPRESSA for the first time 17

Setting up .....................................................................................................................................................17

Filling the water tank ..................................................................................................................................17

Filling the bean container ..........................................................................................................................17

First-time use ..............................................................................................................................................18

Inserting filter and activating ..................................................................................................................19

Determining water hardness and adjusting .........................................................................................20

Adjusting grinder .......................................................................................................................................21

Switching on ...............................................................................................................................................22

Switching off (standby) .............................................................................................................................23

3 Familiarising yourself with the control options 24

Preparing drinks at the touch of a button ............................................................................................24

One-off settings before and while your drink is being prepared ......................................................25

Permanent settings according to cup size ........................................................................................... 26

Permanent settings in programming mode ........................................................................................ 26

Query information and care status ........................................................................................................ 28

4 Preparation at the touch of a button 31

Espresso .......................................................................................................................................................31

Coffee ...........................................................................................................................................................31

Cappuccino..................................................................................................................................................32

Pre-ground coffee ......................................................................................................................................33

Warm milk .................................................................................................................................................. 34

Hot water .....................................................................................................................................................35

Table of contents

5 Permanent settings in programming mode 36

Buttons ........................................................................................................................................................36

Energy Save Mode .....................................................................................................................................37

Time .............................................................................................................................................................38

Programmable switch-on time ...............................................................................................................38

Programmable automatic switch-off time ........................................................................................... 39

Units amount of water/time format ......................................................................................................40

Language ....................................................................................................................................................40

6 Maintenance 42

Maintenance tips ....................................................................................................................................... 42

Rinse machine............................................................................................................................................42

Changing the filter ....................................................................................................................................43

Clean machine ...........................................................................................................................................44

Descale machine .......................................................................................................................................46

Rinse Professional Cappuccino Frother .................................................................................................48

Clean Professional Cappuccino Frother ................................................................................................49

Disassemble Professional Cappuccino Frother ....................................................................................50

Cleaning the bean container ................................................................................................................... 50

Descaling the water tank ..........................................................................................................................51

7 Display messages 52 8 Troubleshooting 9 Transport and environmentally neutral disposal

Disposal .......................................................................................................................................................56

10 Technical data 57 Index

JURA contact details / Legal information

Important Safeguards

IMPORTANT SAFEGUARDS

These safeguards apply for machines with UL safety test (see rating plate and chapter 10, ‘Technical data and guide values’).

Follow the basic safety precautions

When using electrical appliances, basic safety precautions should always be followed, to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

p Read all instructions. p Do not touch hot surfaces. Use handles or knobs. p To protect against fire , electric shock and injury to persons, do

not immerse cord, plugs, or body of machine in water or other liquid.

p Close supervision is necessary when any appliance is used by

or near children.

p Unplug from outlet when not in use and before cleaning.

Allow to cool before putting or taking off parts, and before cleaning the appliance.

p Do not operate any appliance with a damaged cord or plug or

after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment

p The use of accessory attachement not recommended by the

appliance manufacturer may result in fire, electric shock, or injury to persons.

p Do not use outdoors. p Do not let the cord hang over the edge of a table or counter,

or touch hot surfaces.

p Do not place on or near a hot gas or electric burner, or in a

heated oven.

p Always attach plug to appliance first, then plug cord into the

wall outlet. To disconnect, turn any control to ‘OFF’ then remove plug from wall outlet.

p Do not use appliance for other than intented use. p Use extreme caution when dispensing hot steam. p For household use only.

SAVE THESE INSTRUCTIONS

Important Safeguards

Special cord set instructions

a. A short power supply cord is provided to reduce the risk

resulting from becoming entangled in or tripping over a long

cord. Your IMPRESSA has a 3-pin grounded plug. b. Longer extension cords are available and may be used if care

is exercised in their use. c. If an extension cord is used,

1. the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance, and

2. if the appliance is of the grounded type, the extension courd should be a grounding type 3-wire cord, and

3. the longer cord shall be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children of tripped over.

p As a safety feature, this plug will fit in a polarized outlet only

one way.

p If the plug does not fit fully in the outlet, reverse the plug. If it

still does not fit, contact a qualified electrician.

p Do not modify the plug in any way or attempt to defeat this

safety feature.

Warning

Caution

To reduc e the risk of fire or electric shock, do not remove any service covers. No user serviceable parts inside. Repair should be done by authorized personnel only.

This appliance is for household use. Any servicing other than cleaning and user maintenance should be performed by an authorized service representative:

p Do not immerse base in water or try to disassemble. p To reduce the risk of fire or electric shock, do not remove the

base. No user serviceable parts inside. Repair should be done by authorized service personnel only.

p Check voltage to be sure that the voltage indicated on the

name plate agreees with your voltage.

p Never use warm or hot water to fill the water container! Use

cold water only.

Important Safeguards

p Keep your hands and the cord away from hot parts of the

appliance during operation.

p Never clean with scouring powders or hard implements.

NEVER DO (or you will void your warranty protection):

p Never fill instant coffee, chocolat e mix et c. int o the grinder or

ground coffee funnel (grunder by-pass). It will damage the functioning of the brewing chamber

p Never fill sugar coated coffee beans into the bean hopper. In

case of doubt, call your dealer.

p Never fill anything other than coffee beans into the bean con-

tainer (no chocolate, no rice, no nuts, no spices, nothing other than roasted coffee beans).

p Never do anything with the machine which is not described in

the User‘s Manual. In case of doubt, call your dealer.

Important Safeguards

Control elements and accessories

2 3

6 7

12 13 14 15

16 17

Figure: IMPRESSA J5 Piano White

1 Bean container with aroma preservation

cover 2 Plain text display 3 Water tank 4 Height/width-adjustable coffee spout 5 Coffee grounds container 6 Drip tray 7 Cup platform

8 Filler funnel for pre-ground coffee 9 Fineness of grind switch 10 Storage compartment with measuring spoon

and hot water nozzle 11 Power switch and power cable (side) 12 Connector System

for removable nozzles 13 Professional Cappuccino Frother 14 CLARIS filter cartridge 15 JURA Cappuccino Cleaner 16 JURA cleaning tablets 17 Milk pipe

Surface of the machine Display

G On/Off button

1 2

ö Rotary Switch

h Maintenance button

a 1 Espresso button

4 5

s 2 Espressi button

q Hot water button

k Steam button

d 1 Coffee button

f 2 Coffees button

Control elements and accessories

1 2 3

4 5 6 7 8 9

The IMPRESSA J5 Manual

You are holding the manual for yo ur IMPRESSA J5 in your hand. It will help you to familiarize yourself with your IMPRESSA safely and quickly and teach you the full range of facilities it offers.

Chapter 2, ‘Preparing and using your IMPRESSA for the first time’, explains step-by-step how to set up and prepare the IMPRESSA.

Chapter 3, ‘Familiarising yourself with the control options’ is important for you to read as you are familiarising yourself with your IMPRESSA. It invites you to actively explore all the different coffee experiences that it offers.

All the other chapters are intended to help you when you have a specific query.

If you use the IMPRESSA J5 Manual, you will become a master at preparing exciting coffee specialities, you will be a Barista!

You can download the short operating instructions for y our machine from the JURA website (www.jura.com).

Important information

Proper use

The machine has been designed and built for domestic use. It should only be used to prepare coffee and to heat milk and water. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility for the consequences of improper use.

Before using the machine always carefully read and comply with all these instructions. Keep this manual close to the IMPRESSA and, if appropriate, pass it on to the next user.

For your safety

Please read and note carefully the following important safety information.

By doing this, you can avoid the life-threatening danger of electric shock:

p Never use a machine which has been damaged or with a

defective power cable.

p For information on what to do in case of damage, for example

if there is a smell of burning, unplug the machine immedi ately from the mains supply and contact the JURA service centre.

p If the power cable for this machine is damaged, it must be

repaired either directly by JURA or by a JURA approved service centre.

p Make sure that the IMPRESSA and the power cable are not

located close to hot surfaces.

p Be careful to ensure that the power cable does not get caught

and does not rub against sharp edges.

p Never open and repair the machine yourself. Do not modify

the machine in any way that is not described in the IMPRESS A Manual. The machine contains live parts. If opened, there is a danger of serious injury. Repairs may only be carried out by JURA approved service centres, using original spare parts and accessories.

Important information

There is a risk of scalds or burns on the spouts or in the nozzle:

p Place the machine out of the reach of children. p Do not touch any hot parts. Use the handles provided. p Be careful to ensure that the appropriate nozzle is installed

and clean. The nozzle or parts of the nozzle might come off if the parts are not assembled correctly or a blockage occurs.

A defective machine is not safe and could cause injury or fire. To avoid damage and any associated risk of injury or fire:

p Never allow the power cable to loo sely hang down. The pow er

cable can be tripped over or damaged.

p Protect your IMPRESSA from environmental influences such

as rain, frost and direct sunlight.

p Do not put the IMPRESSA, cable or connections in water. p Do not put the IMPRESSA or any individual parts in the dish-

washer.

p Turn your IMPRESSA off at the power switch before starting

any cleaning operation. Always wipe your IMPRESSA with a damp cloth rather than a wet one, and protect it from prolonged water splash.

p Only connect the machine to a power supply in accordance

with the information on the rating plate. The rating plate is located on the underside of your IMPRESSA. Further technical data is given in Chapter 10 ‘Technical Data’.

p Use only original JURA care products. Use of accessories that

are not explicitly recommended by JURA could damage the IMPRESSA.

p Do not use any coffee beans treated with additives or caramel-

ised coffee beans.

p Always fill the water tank with cold, fresh mains water. p If you will be absent for an extended period, turn the machine

off and unplug.

Important information

Risk to children and persons with limited capabilities in operating machines:

p The machine is not designed to be operated by children and

persons with limited capabilities.

p The machine may only be used by persons who are able to

operate the machine safely.

Safe handling of the CLARIS filter cartridges:

p Filter cartridges should be kept out of the reach of children. p Store them dry in the sealed package. p Protect them from heat and direct sunlight. p Do NOT use damaged filter cartridges. p Do NOT open filter cartridges.

The IMPRESSA J5 Manual

Symbol description

Warnings

CAUTION

Symbols used

Always take note of any information marked with the CAUTION or WARNING symbol. The signal word WARNING points out potential risk of serious injury, and the signal word CAUTION potential risk of slight injury.

The CAUTION symbol is used to dr aw attention to circumstances which could cause the machine to become damaged.

Information and tips to make things easier for you as you use your IMPRESSA.

References to the online JURA website, where you can find interesting further information: www.jura.com

Prompt to take action. This symbol means that you are being prompted to perform some action.

1 IMPRESSA J5 – Perfect Enjoyment, Perfected Aesthetics

1 IMPRESSA J5 – Perfect Enjoyment, Perfect Aesthetics

Coffee that fulfils your wildest dreams

Perfect Enjoyment, Perfect Aesthetics

JURA develops superior fully automatic coffee/Espresso machines which get the best taste and aroma out of every coffee blend and roast. It delivers this through a unique, intelligent pre-brew system combined with loving attention to detail and years of experience.

The uncompromising all-round design of the IMPRESSA J5 indulges the eyes as well as the taste buds. Gourmets will start to rave when they live out their coffee fantasies and experience a new dimension of enjoyment with Ristretto, Espresso, Café Crème, Cappuccino, Latte Macchiato and many other trendy specialities. This is easy to achieve, because the innovative operating concept leaves nothing to be desired when it comes to simplicity. And the integrated cup illumination places every coffee speciality in the right light.

p Breathtakingly beautiful

Clear, no-frill contours and high-quality materials set the tone of the design of the J series IMPRESSA models. All details have been exactly thought out and come together to form an aesthetic whole, so everyone will be enthusiastic about coffee. This makes IMPRESSA J series a veritable household fixture, which, thanks to its compact design, can easily be placed anywhere.

p Pure ergonomics

The centrally arranged control elements, with a unique Rotary Switch and a plain text display which speaks your language, will allow you to quickly and intuitively make your coffee wishes come true. Here, the focus is on your personal taste. Simply select the coffee strength, amount of water and temperature according to your individual preferences. You can even choose between three hot water temperature levels. Accessories such as the measuring spoon and the hot water nozzle can be conveniently stored in the storage compartment where they are always within reach.

1 IMPRESSA J5 – Perfect Enjoyment, Perfect Aesthetics

p Height and width-adjustable coffee spout

Another JURA innovation is the height and width-adjustable coffee spout. It allows precise adaptation to different cup heights and diameters. This prevents coffee splashing and guarantees a fantastic crema of ideal consistency.

JURA on the Internet

Knowledge Builder

p Connector System

This makes it possible to use the Professional Cappuccino Frother, which is fitted as standard, for per fect milk foam or warm milk, a hot water nozzle for an e ven jet of wa ter , and the optionally available 2-stage frothing nozzle.

Visit us on the Internet.

@ At www.jura.com you will find interesting and up-to-date

information on your IMPRESSA and on every aspect of coffee.

You can familiarize yourself with your IMPRESSA J5 in a fun way on the PC.

@ The Knowledge Builder awaits you at www.jura.com. The

interactive assistant, LEO, will support you and explain the benefits of and how to use your IMPRESSA.

2 Preparing and using your IMPRESSA for the first time

This chapter provides you with the information y ou need to use your IMPRESSA without any problems. You will prepare your IMPRESSA step-by-step for your first coffee experience using it.

Keep the packaging for your IMPRESSA. It is used to protect the machine during transportation.

Setting up

Filling the water tank

CAUTION

Filling the bean container

CAUTION

When setting up your IMPRESSA, please note the following:

p Set the IMPRESSA down on a horizontal surface that is not

sensitive to water.

p Choose a spot for your IMPRESSA which is protected against

overheating.

To enjoy perfect coffee, we recommend that you change the water every day.

Milk, mineral water or other liquids can damage the water tank or the machine.

l Only fill the water tank with fresh, cold water.

l Open the cover of the water tank. l Remove the water tank and rinse it with cold water. l Fill the water tank with fresh, cold mains water and

reinsert.

l Close the cover of the water tank.

The bean container has an aroma preservation cover . This will ensure that your coffee beans retain their aroma for longer.

Coffee beans which have been treated with additives (e.g. sugar), either pre-ground or in the form of freeze-dried coffee, will damage the grinder.

l Only use untreated coffee beans to refill the bean container.

l Open the cover of the bean container and remove the aroma

preservation cover.

2 Preparing and using your IMPRESSA for the first time

l Remove any dirt or foreign objects inside the bean

container.

l New machines contain an information sheet in the bean

container. Remove this information sheet.

l Fill the bean container with coffee beans, then close the

aroma preservation cover and the bean container cover.

First-time use

If the machine is operated with a defective power cable, there is a danger of electric shock.

WARNING

l Never use a machine which has a defective power cable.

Precondition: The water tank must be full.

l Insert the mains plug into a power socket.

e l Switch on the IMPRESSA using the power switc h on the right

side of the machine. The On/Off button

g l Press the On/Off button to switch the IMPRESSA on.

The Rotary Switch lights up. appears on the display.

g will light up (standby).

SPRACHE DEUTSCH

Ä l Turn the Rotary Switch until the desired language appears.

For example

LANGUAGE ENGLISH.

M L Press the Rotary Switch to confirm that you want the English

language setting.

OK appears briefly on the display to confirm the setting. PRESS RINSE, the maintenance button h lights up.

l Place a receptacle under the Professional Cappuccino

Frother.

H L Press the maintenance button.

SYSTEM FILLING, the system fills up with water.

A small amount of water will flow out of the Professional Cappuccino Frother. This operation stops automatically. the display.

PRESS RINSE, the maintenance button h lights up.

HEATING appears on

2 Preparing and using your IMPRESSA for the first time

l Place a receptacle under the coffee spout.

h l Press the maintenance button.

The machine will rinse itself, stopping automatically.

READY appears on the display. Your IMPRESSA is ready to

use.

o Aft er the first time that a coff ee speciality has been prepared,

it may happen that the grinder has not yet been completely filled with coffee beans. In that case, prepare a different coffee speciality.

FILL BEANS appears on the display if

Inserting filter and activating

Your IMPRES S A no longer has t o be de-scaled if you use the CLARIS filter cartridge.

o Perform the ‘Insert filt er’ operation without interruptions. This

will ensure that your IMPRESSA always produces its best.

o After t wo months, the filter will cease to work. Monitor the

elapsed time as shown on the date plate on the cartridge holder.

@ You can also try out the ‘Insert filter’ operation online. Visit the

Knowledge Builder at www.jura.com.

Precondition:

READY appears on the display.

m l Keep the Rotary Switch pressed until, RINSE appears on

the display.

ä l Turn the Rotary Switch until FILTER - appears. m l Press the Rotary Switch to enter the programme item.

NO - appears on the display.

ä l Turn the Rotary Switch until YES appears. m l Press the Rotary Switch to confirm this setting.

OK appears briefly on the display to confirm the setting. INSERT, the maintenance button h lights up.

l Remove the CLARIS filter cartridge and the filter cartridge

extension from the Welcome Pack.

l Stick the extension on top of the filter cartridge. l Remove the water tank and empty it.

2 Preparing and using your IMPRESSA for the first time

l Lif t the cartridge holder and insert the filter cartridge into

the water tank, applying light pressure.

l Close the cartridge holder. It will click into place audibly. l Fill the water tank with cold, fresh mains water and

reinsert.

l Place a receptacle (at least 500 ml) under the Professional

Cappuccino Frother.

l Turn the selection lever of the nozzle to the steam

position

h l Press the maintenance button.

FILTER RINSING. Water will flow out at the nozzle.

o You can interrupt the rinsing of the filter at any time by press-

ing any button.

o The water may be slightly discoloured. This is not harmful to

health, nor does it affect the taste.

Rinsing of the filter automatically stops after approx. 500 ml.

HEATING appears on the display, and then READY

appears. The filter is now activated.

k .

Determining water hardness and adjusting

The harder the water is, the more frequently the IMPRESSA needs to be descaled. It is therefore important to adjust the water hardness.

o However, if y ou are using the CLARIS filt er cartridge and have

activated the filter, you will not be able to adjust the water hardness.

o The water hardness is adjusted to 16° dH (German hardness)

in the factory.

o The water hardness can be adjusted between 1° dH and

30° dH. This can also be deactivated, which means that the IMPRESSA won’t let you know when it has to be descaled.

You can find out what the w at er hardness is by using the Aquadur® test strip enclosed in the Welcome Pack.

l Hold the test strip briefly (for one second) under flowing

mains water. Shake off the water.

l Wait for about one minute.

2 Preparing and using your IMPRESSA for the first time

l You will then be able to read the degree of water hardness

from the discolouration of the Aquadur® test strip and the description on the packaging. You can now adjust the water hardness.

Adjusting grinder

CAUTION

Example: To change the water hardness from

proceed as follows: Precondition:

READY appears on the display.

16°dH to 25°dH,

M l Keep the Rotary Switch pressed until, RINSE appears on

the display.

Ä l Turn the Rotary Switch until HARDNESS - is displayed. M l Press the Rotary Switch to enter the programme item.

16°dH appears on the display.

Ä l Turn the Rotary Switch until 25°dH is displayed. m l Press the Rotary Switch to confirm the setting.

OK appears briefly on the display to confirm that the water

hardness is set.

HARDNESS

Ä l Turn the Rotary Switch until EXIT appears. m l Press the Rotary Switch to exit programming mode.

READY appears on the display.

You can adjust the grinder continuously to suit the roast of your coffee.

If you adjust the fineness of grind when the grinder is not operating, the fineness of grind switch could be damaged.

l Only adjust the fineness of grind when the grinder is

running.

The consistence of grind setting is correct if the coffee flows regularly from the coffee spout. In addition a fine, thick crema forms. Our recommendations:

p Select a fine setting for a light roast.

u If the consistence of grind is too fine, the coffee only flows in

drips from the coffee spout.

2 Preparing and using your IMPRESSA for the first time

p Select a coarse setting for a darker roast.

u If the consistence of grind is too coarse, the coffee flows too

quickly from the coffee spout.

Example: T o change the fineness of grind during coffee preparation, proceed as follows:

l Open the cover of the storage compartment. l Place a cup under the coffee spout.

d l Press the 1 Coffee button.

The grinder starts and After this, the coffee strength is briefly displayed.

l Turn the fineness of grind switch to the desired position

while the grinder is running. The coffee will be prepared and the fineness of grind is adjusted.

1 COFFEE appears on the display.

Switching on

When the IMPRESSA is switched on, a prompt to perform a rinse operation automatically appears.

Precondition: Your IMPRESSA is switched on at the power switch and the On/Off button

g is illuminated (standby).

g l Press the On/Off button to switch the IMPRESSA on.

HEATING

PRESS RINSE

, the maintenance button h lights up.

l Place a receptacle under the coffee spout.

h l Press the maintenance button.

The machine will rinse itself, stopping automatically.

READY appears on the display. Your IMPRESSA is ready to

use.

2 Preparing and using your IMPRESSA for the first time

Switching off (standby )

When you switch off your IMPRESSA, the system is automatically rinsed.

l Place a receptacle under the coffee spout.

g l Press the On/Off button.

The system will be rinsed. play. The operation stops automatically. The IMPRESSA is switched off (in standby mode), and the On/Off symbol

g is illuminated.

RINSING appears on the dis-

3 Familiarising yourself with the control options

With the IMPRESSA, you can prepare an excellent coffee speciality at the touch of a button. You also have the option of adjusting the coffee strength and temperature, as well as the amount of water to your personal taste.

This chapter will allow you to become familiar with all control options with the aid of examples. To familiarise yourself with your IMPRESSA, we recommend that you make a point of actively trying the facilities described in this chapter . Y ou will find this is well w orthwhile.

Learn how to perform the following:

p Preparing drinks at the touch of a button p One-off settings before and while your drink is being

prepared

p Permanent settings according to cup size p Permanent settings in programming mode

o You can stop the machine at any time while a coffee speciality

is being prepared. To do this, press any button.

Preparing drinks at the touch of a button

@ If you prefer to familiarize yourself with your IMPRESSA in a

fun way on the computer, the interactive Knowledge Builder tutorial program can be found on the Internet at www.jura.com.

Prepare your favourite coffee speciality at the touch of a button.

All coffee specialities are prepared following this model at the touch of a button.

Example: This is how to prepare an Espresso. Precondition:

READY appears on the display.

l Place an Espresso cup under the coffee spout.

3 Familiarising yourself with the control options

a l Press the 1 Espresso button.

1 ESPRESSO appears on the display. After this, the coffee

strength is briefly displayed. The pre-set amount of water flows into the cup and the process stops automatically.

READY appears on the display.

One-off settings before and while your drink is being prepared

Adjust the coffee strength before your drink is prepared

You can change both the c o ffee strength before and the amount of water while your drink is being prepared. These settings are not saved.

One-off settings before and during coffee preparation always follo w this model.

The following coffee strength options are available:

p Mild p Normal p Strong p Xstrong

Example: This is how to prepare a strong cup of coffee. Precondition:

ä l Turn the Rotary Switch until STRONG appears on the

d l Press the 1 Coffee button until STRONG is displayed.

READY appears on the display.

l Place a cup under the coffee spout.

display.

1 COFFEE appears on the display, and then STRONG

briefly appears. The pre-set amount of water flows into the cup. The preparation stops automatically. display.

READY appears on the

Adjust the amount of water while your drink is being prepared

Example: This is how to prepare a Precondition:

READY appears on the display.

110 ML cup of coffee.

l Place a cup under the coffee spout.

d l Press the 1 Coffee button.

1 COFFEE appears on the display, and then the strength

briefly appears.

3 Familiarising yourself with the control options

Ä l Turn the Rotary Switch until 110 ML is displayed.

The set amount of water flows into the cup. The prepar ation stops automatically.

READY appears on the display.

Permanent settings according to cup size

It is easy to make permanent settings for the amount of water for all coffee specialities, the hot water and steam according to c up size . As in the following example, adjust the amount of water once. Every time you prepare a drink in the future, this amount of water will be dispensed.

Permanent settings according to cup size works the same w ay for all coffee specialities.

Example: T o make permanent settings for the amount of water for an Espresso, proceed as follows: Precondition:

READY appears on the display.

l Place an Espresso cup under the coffee spout.

a l Press and hold the 1 Espresso button.

1 ESPRESSO appears on the display.

a l Hold the 1 Espresso button down until

ENOUGH COFFEE ? appears.

a l Release the 1 Espresso button.

Coffee preparation will start and the Espresso will flow into the cup.

l Press any button as soon as enough Espresso has flowed

into the cup. Espresso preparation will now stop. the display. The set amount of water for an Espresso will be permanently stored.

OK appears briefly on

Permanent settings in programming mode

o You can alter these settings at any time by repeating the

above procedure.

You can easily adjust y our IMPRESS A to y our personal coffee blends and specialities. Simply by turning and pressing the Rotary Switch, you can navigate through the easy-to-understand program steps and make permanent settings.

3 Familiarising yourself with the control options

You can make the following settings with the Rotary Switch:

Programme item Subitem Explanation

RINSE

BUTTONS

FILTER -/√

HARDNESS (is only

displayed when the filter is not activated)

ENERGY -/√

TIME --:--

UNIT ON --:--

OFF AFTER

INFO

DISPLAY

LANGUAGE

RINSE

FILTER

CLEAN

DE-SCALE

SELECT BUTTON

YES √

NO -

INACTIVE

1° dH – 30°dH

SAVE -

SAVE √

INACTIVE

0.5 H – 15 H

BUTTONS

CLEAN

DE-SCALE (only when

filter is not activated)

FILTER (only when

filter is activated)

ML / OZ

24 H / AM PM

l Select the desired maintenance programme.

If you don’t take any action, the programming mode is exited after approx. 5 seconds.

l Select your settings for the coffee specialities,

steam and hot water.

l Indicate whether y ou operate y our IMPRESSA

with or without a CLARIS filter cartridge.

l Adjust the water hardness.

l Select an energy saving mode.

l Set the time. l Set the switch-on time. l Set the switch-off time.

l Keep track of all prepared coffee specialities

and call the care status.

l Select the unit of the amount of water and

the time format.

l Select your language.

EXIT

l Exit programming mode.

Settings in programming mode always follow the same model.

3 Familiarising yourself with the control options

Example: To change the temperature of 1 Espresso from NORMAL

HIGH proceed as follows:

Precondition:

M l Keep the Rotary Switch pressed until RINSE appears. Ä L Turn the Rotary Switch until BUTTONS appears. M l Press the Rotary Switch to enter the programme item.

o In the next step, select the coffee speciality button for which

a l Press the 1 Espresso button.

Ä L Turn the Rotary Switch until TEMP. appears. M l Press the Rotary Switch to enter the programme item.

Ä L Turn the Rotary Switch until HIGH appears. M l Press the Rotary Switch to confirm the setting.

Ä L Turn the Rotary Switch until EXIT appears. M l Press the Rotary Switch to exit the programme item.

Ä L Turn the Rotary Switch until EXIT appears. M l Press the Rotary Switch to exit programming mode.

READY appears on the display.

SELECT BUTTON

you would like to make settings. No coffee speciality will be prepared hereby.

WATER

NORMAL

OK appears briefly on the display.

TEMP.

BUTTONS

READY

Query information and care status

Query information

Under the programme item INFO, you can query the following information:

p Number of prepared coffee specialities, steam and hot water p Care status and number of executed maintenance pro-

grammes (cleaning, de-scaling, filter change)

Precondition:

M l Keep the Rotary Switch pressed until RINSE appears. Ä L Turn the Rotary Switch until INFO appears.

READY appears on the display.

3 Familiarising yourself with the control options

M l Press the Rotary Switch to enter the programme item.

BUTTONS

M l Press the Rotary Switch.

Total number of the prepared coffee spec ialities appears on the display.

o By pressing the individual buttons, the respective number of

coffee specialities, steam and hot water is displa yed. Open the filler funnel for pre-ground coffee in order to display this number.

M l Press the Rotary Switch.

BUTTONS

Ä L Turn the Rotary Switch until EXIT appears. M l Press the Rotary Switch to exit this programme item.

INFO

Ä L Turn the Rotary Switch until EXIT appears. M l Press the Rotary Switch to exit the programming mode.

READY

Care status query

Example: To query the care status and number of executed clean-

ings, proceed as follows: Precondition:

READY appears on the display.

M l Keep the Rotary Switch pressed until RINSE appears. Ä L Turn the Rotary Switch until INFO appears. M l Press the Rotary Switch to enter the programme item.

BUTTONS

Ä L Turn the Rotary Switch until CLEAN appears. M l Press the Rotary Switch.

The number of executed cleanings appears on the display.

o You can switch between the number of executed mainte-

nance programmes and the respective care status by turning the Rotary Switch.

3 Familiarising yourself with the control options

o The filled out fields show the care status. Once all fields are

M l Press the Rotary Switch to exit this query.

Ä L Turn the Rotary Switch until EXIT appears. M l Press the Rotary Switch to exit this programme item.

Ä L Turn the Rotary Switch until EXIT appears. M l Press the Rotary Switch to exit the programming mode.

filled out, your IMPRESSA will request the respective maintenance programme.

CLEAN

INFO

READY

4 Preparation at the touch of a button

In this chapter, you will find out how to prepare coffee specialities, milk and hot water without making further settings.

Chapter 3, ‘Familiarising yourself with the control options ’, will teach you how to adjust the settings to your personal preferences. Alternatively, you can use Chapter 5, ‘Permanent settings in programming mode’.

o You can stop the machine at any time while a coffee speciality

is being prepared. To do this, press any button.

@ You can also try out the preparation of coffee specialities

online. Visit the Knowledge Builder at www.jura.com.

4 Preparation at the touch of a button

Espresso

Coffee

The classic coffee drink from Italy. There is a definite crema on the surface of the Espresso.

Example: This is how to prepare an Espresso.

l Place an Espresso cup under the coffee spout.

a l Press the 1 Espresso button.

1 ESPRESSO appears on the display. After this, the

strength is briefly displayed. The pre-set amount of water flows into the cup and the process stops automatically.

To prepare two cups of Espresso, place two cups under the coffee spout and press the 2 Espressi button

Example: This is how to prepare a coffee.

READY appears on the display.

l Place a cup under the coffee spout.

d l Press the 1 Coffee button.

1 COFFEE appears on the display. After this, the strength

is briefly displayed. The pre-set amount of water flows into the cup and the process stops automatically. play.

READY appears on the dis-

4 Preparation at the touch of a button

To prepare two cups of c offee, place two cups under the coffee spout and press the 2 Coffees button

Cappuccino

A classic Italian recipe. The Cappuccino is made up of one-third each of Espresso, hot milk and milk foam. The finishing touch is a sprinkling of cocoa powder.

Precondition: The Professional Cappuccino Frother is mounted.

l Take the milk pipe out of the Welcome Pack. l Take the protective cap off the Professional Cappuccino

Frother.

l Attach the milk pipe to the nozzle. l Inser t the other end in a milk carton/bottle or connec t it to

a milk container.

l Place a cup under the Professional Cappuccino Frother. l Turn the selection lever of the nozzle to the milk foam

position .

k l Press the steam button.

HEATING

READY appears as soon as the IMPRESSA has heated up.

k l Press the steam button.

STEAM, the milk foam is being prepared.

The operation stops automatically after reaching the pre-set amount of steam.

o The milk foam preparation can be interrupted at any time. To

do this, press any button.

o While milk foam is being prepared, you can change the pre-

set amount of water by turning the Rotary Switch.

o You can continue with preparing milk foam within approx.

40 seconds.

4 Preparation at the touch of a button

l Move the cup under the coffee spout.

a l Press the 1 Espresso button.

1 ESPRESSO appears on the display. After this, the

strength is briefly displayed. The pre-set amount of water flows into the cup. Drink preparation stops automatically . the display.

To ensure that the Professional Cappucc ino Frother works perf ectly , you should rinse and clean it regularly. You can find more information about this in Chapter 6, ‘Maintenance – Professional Cappuccino Frother’.

READY appears on

Pre-ground coffee

You can choose a second coffee blend with the filler funnel for preground coffee.

All coffee specialities with pre-ground coffee are prepared following this model.

o Never add more than two level measuring spoons of pre-

ground coffee.

o Use pre-ground coffee which is not ground too finely. Very

fine coffee can block up the system so that the coffee only comes out in drips.

o If you didn’t fill a sufficient amount of pre-ground coffee, NOT

ENOUGH PRE-GROUND

stops operation.

is displayed and the IMPRESSA

o The desired coffee speciality must be prepared within approx.

1 minute after filling with the pre-ground coffee. Otherwise, the IMPRESSA stops the operation and is ready to use again.

Example: This is how to prepare a cup of coffee using pre-ground coffee.

l Place a cup under the coffee spout. l Open the cover of the storage compartment, take out the

measuring spoon for pre-ground coffee and close the cover again.

4 Preparation at the touch of a button

l Open the cover for pre-ground coffee.

FILL PRE-GROUND

l Place one level measuring spoon of pre-ground coffee in the

filler funnel.

l Close the cover for pre-ground coffee again.

SELECT BUTTON

d l Press the 1 Coffee button.

1 COFFEE appears on the display. After this, PRE-GROUND is briefly displayed.

The pre-set amount of water flows into the cup and the process stops automatically. display.

READY appears on the

Warm milk

Precondition: The Professional Cappuccino Frother is installed.

l Take the milk pipe out of the Welcome Pack. l Take the protective cap off the Professional Cappuccino

Frother.

l Attach the milk pipe to the nozzle. l Inser t the other end in a milk carton/bottle or connec t it to

a milk container.

l Place a cup under the Professional Cappuccino Frother. l Turn the selection lever of the nozzle to the milk position .

k l Press the steam button.

HEATING

READY

appears as soon as the IMPRESSA has heated up.

k l Press the steam button.

STEAM appears on the display. The warm milk is being

prepared. The operation stops automatically after reaching the pre-set amount of steam.

o The milk preparation can be interrupted at any time. To do

this, press any button.

o While milk is being prepared, you can change the pre-set

amount of water by turning the Rotary Switch.

o You can continue with preparing milk within approx.

40 seconds. After this, the machine must heat up again.

4 Preparation at the touch of a button

To ensure that the Professional Cappucc ino Frother works perf ectly , you should rinse and clean it regularly. The description for this can be found in Chapter 6, ‘Maintenance – Professional Cappuccino Frother’.

Hot water

CAUTION

To obtain a perfect water flow, att ach the exchangeable hot water nozzle. You can find the nozzle under the cover of the storage compartment.

There is a danger of scalding from hot water splashes.

l Avoid direct contact with the skin.

Start by exchanging the nozzle:

l Carefully remove the Professional Cappuccino Frother from

the Connector System

l Open the cover of the storage compartment. Take out the

hot water nozzle and close the cover again.

l Stick the hot water nozzle onto the Connector System

lightly rotating.

l Place a cup under the hot water nozzle.

q l Press the hot water button.

WATER appears on the display, and then the pre-set tem-

perature briefly appears. The pre-set amount of water flows into the cup and the process stops automatically.

READY

o By pressing the hot water button several times (within appro x.

2 seconds) you can set the temperature to your individual

preference. This setting is not saved.

o During preparation, you can change the amount by turning

the Rotary Switch.

5 Permanent settings in programming mode

Buttons

Buttons Temp. Strength Amount

1 Espresso

NORMAL, HIGH MILD, NORMAL,

In the following you will find out how to make permanent settings.

15 ML – 240 ML

STRONG,

XSTRONG

2 Espressi NORMAL, HIGH – 15 ML – 240 ML

(per cup)

1 coffee

NORMAL, HIGH MILD, NORMAL,

15 ML – 240 ML

STRONG,

XSTRONG

2 coffees NORMAL, HIGH – 15 ML – 240 ML

(per cup)

Hot water

REGULAR, NORMAL,

– 15 ML – 450 ML

HOT

Steam – – 3 SEC – 120 SEC

Permanent settings in programming mode always follow the same model.

Example: To change the temperature of 1 Espresso from to

HIGH, proceed as follows:

Precondition:

READY appears on the display.

M l Keep the Rotary Switch pressed until RINSE appears. Ä L Turn the Rotary Switch until BUTTONS appears. M l Press the Rotary Switch to enter the programme item.

SELECT BUTTON

NORMAL

o In the next step, select the coffee speciality button for which

you would like to make settings. No coffee speciality will be prepared hereby.

5 Permanent settings in programming mode

A L Press the 1 Espresso button.

WATER

Ä L Turn the Rotary Switch until TEMP. appears. M l Press the Rotary Switch to enter the programme item.

NORMAL

Ä L Turn the Rotary Switch until HIGH appears. M l Press the Rotary Switch to confirm the setting.

OK appears briefly on the display.

TEMP.

Ä L Turn the Rotary Switch until EXIT appears. M l Press the Rotary Switch to exit the programme item.

BUTTONS

Ä L Turn the Rotary Switch until EXIT appears. M l Press the Rotary Switch to exit the programming mode.

READY

Energy Save Mode

An energy saving mode (Energy Save Mode, E.S.M.©) permanent setting can be made under this programme item.

Your IMPRESSA has two energy-saving modes:

p ENERGY -

u Your IMPRESSA is continuously ready for use. u All coffee and milk products, as well as hot water, can be pre-

pared without having to wait.

p ENERGY √

u After approx. 5 minutes, your IMPRESSA switches to the

energy-saving temperature and is not ready for use.

u Before coffee, hot water or milk is prepared, the machine

heats up for approx. 30 seconds.

o ENERGY - is defined under the basic settings.

Example: To change the energy-saving level from

ENERGY √, proceed as follows:

Precondition:

READY appears on the display.

M l Keep the Rotary Switch pressed until RINSE appears. Ä L Turn the Rotary Switch until ENERGY - appears.

ENERGY - to

5 Permanent settings in programming mode

M l Press the Rotary Switch to enter the programme item.

Ä L Turn the Rotary Switch until SAVE √ appears. M l Press the Rotary Switch to confirm this selection.

Ä L Turn the Rotary Switch until EXIT appears. M l Press the Rotary Switch to exit the programming mode.

SAVE -

OK appears briefly on the display.

ENERGY √

READY

Time

Programmable switch-on time

If the machine is disconnected from the mains, the time has to be reset.

Precondition:

READY appears on the display.

M l Keep the Rotary Switch pressed until RINSE appears. Ä L Turn the Rotary Switch until TIME appears. M l Press the Rotary Switch to enter the programme item.

--:-- appears on the display.

Ä L Turn the Rotary Switch to set the hour. M l Press the Rotary Switch to confirm the hour setting. Ä L Turn the Rotary Switch to set the minutes. M l Press the Rotary Switch to confirm the minute setting.

OK appears briefly on the display.

TIME

Ä L Turn the Rotary Switch until EXIT appears. M l Press the Rotary Switch to exit the programming mode.

READY

The programmable switch-on time is deactivated in the basic setting and can only be set when the time is set.

o The programmable switch-on only works when the machine

is switched on at the power switch

e (standby).

Precondition:

READY appears on the display.

M l Keep the Rotary Switch pressed until RINSE appears. Ä L Turn the Rotary Switch until UNIT ON appears.

5 Permanent settings in programming mode

M l Press the Rotary Switch to enter the programme item.

--:-- appears on the display.

OK appears briefly on the display.

UNIT ON

Ä L Turn the Rotary Switch until EXIT appears. M l Press the Rotary Switch to exit the programming mode.

READY

Programmable automatic switch-off time

You can save energy with the programmable switch-off function of your IMPRESSA.

o The basic setting for the programmable automatic switch-off

time is 5 hours. This means that the device switches off automatically 5 hours after it is used last.

o The programmable automatic switch-off time can be adjust-

ed between 0.5 and 15 hours or deactivated.

Example: To change the programmable automatic switch-off time from 1 hours to 2, proceed as follows: Precondition:

READY appears on the display.

M l Keep the Rotary Switch pressed until RINSE appears. Ä L Turn the Rotary Switch until OFF AFTER appears. M l Press the Rotary Switch to enter the programme item.

1 H appears on the display.

Ä L Turn the Rotary Switch until 2 H is displayed. M l Press the Rotary Switch to confirm the setting.

Once the setting is programmed, display.

OFF AFTER

OK appears briefly on the

Ä L Turn the Rotary Switch until EXIT appears. M l Press the Rotary Switch to exit the programming mode.

READY

5 Permanent settings in programming mode

Units amount of water/ time format

The unit for the amount of water is set in the factory. Y ou can set the unit for the amount of water to

The time format is set in the factory. You can set the formats

24 HRS or AM/PM.

Example: To change the unit for the amount of water from

OZ, proceed as follows.

Precondition:

READY appears on the display.

ML or OZ.

ML to

M l Keep the Rotary Switch pressed until RINSE appears. Ä L Turn the Rotary Switch until DISPLAY appears. M l Press the Rotary Switch to enter the programme item.

ML/OZ.

o To change the time format, turn the Rotary Switch until

24H/AM PM is displayed.

M l Press the Rotary Switch to enter the programme item.

Ä L Turn the Rotary Switch until OZ appears. M l Press the Rotary Switch to confirm the setting.

OK appears briefly on the display.

ML/OZ

Ä L Turn the Rotary Switch until EXIT appears. M l Press the Rotary Switch to exit the programme item.

DISPLAY

Ä L Turn the Rotary Switch until EXIT appears. M l Press the Rotary Switch to exit the programming mode.

READY

Language

You set the language when you used the machine for the first time.

Example: To change the language from

FRANCAIS proceed as follows.

Precondition:

READY appears on the display.

ENGLISH to

M l Keep the Rotary Switch pressed until RINSE appears. Ä L Turn the Rotary Switch until LANGUAGE appears.

5 Permanent settings in programming mode

M l Press the Rotary Switch to enter the programme item.

ENGLISH

Ä L Turn the Rotary Switch until FRANCAIS appears. M l Press the Rotary Switch to confirm the setting.

OK appears briefly on the display.

LANGUE

Ä L Turn the Rotary Switch until EXIT appears. M l Press the Rotary Switch to exit the programming mode.

PRET appears on the display.

6 Maintenance

Your IMPRESSA has the following integrated maintenance programmes:

p Rinse machine p Changing the filter p Clean machine p Descale machine

o Clean or descale the machine or change the filter whenever

the appropriate indicator is lit up.

Maintenance tips

Rinse machine

To ensure that you get many years’ reliable service out of your IMPRESSA and to guarantee the optimum coffee quality, the machine requires daily maintenance.

You should proceed as follows:

p Empty the coffee grounds container and the drip tray. Rinse

them with warm water.

p Rinse the water tank with clean water. p Dismantle and rinse the Professional Cappuccino Frother (see

Chapter 6, ‘Maintenance – Rinsing the Professional Cappuccino Frother’).

p Wipe the surface of the machine with a damp cloth.

When your IMPRESSA has been switched on, after heating up, a prompt to rinse appears and the maintenance button To initiate the rinse operation, press the maintenance button.

When the IMPRESSA is switched off, a rinse operation is automatically initiated.

h lights up.

6 Maintenance

Precondition: READY appears on the display.

l Place a receptacle under the coffee spout.

M l Keep the Rotary Switch pressed until RINSE appears. M l Press the Rotary Switch to enter the programme item.

RINSE

M l Press the Rotary Switch to initiate the rinse operation.

RINSING, rinsing stops automatically and your IMPRESSA

is now ready for use.

Changing the filter

Change following a prompt

o After 50 litres of water have flowed through, the filter will

cease to work. Your IMPRESSA will automatically prompt you to replace the filter.

o After t wo months, the filter will cease to work. Monitor the

elapsed time as shown on the date plate on the cartridge holder.

o If the CLARIS filter cartridge is not ac tivated, you will not be

prompted to change the filter.

To change the CLARIS filter cartridge when prompted to do so by your IMPRESSA, proceed as follows:

Precondition: maintenance button

FILTER / READY appears on the display , and the

h lights up.

h l Press the maintenance button.

CHANGE

l Remove the water tank and empty it. l Open up the cartridge holder and remo ve the old CLARIS fil-

ter cartridge and the extension piece.

l Stick the extension on top of a new CLARIS filter cartridge. l Insert the filter cartridge into the water tank with light

pressure.

l Close the cartridge holder. It will click into place audibly. l Fill the water tank with cold, fresh mains water and reinsert. l Place a receptacle (at least 500 ml) under the Professional

Cappuccino Frother.

6 Maintenance

l Turn the selection lever of the nozzle to the steam

position

k .

h l Press the maintenance button.

FILTER RINSING - Water will flow out at the nozzle.

o You can interrupt the filter rinsing at any time. T o do this, press

any button.

o The water may be slightly discoloured. This is not harmful to

health, nor does it affect the taste.

Filter rinsing stops automatically after approx. 500 ml.

HEATING appears on the display, and then READY

appears.

@ You can also try out ‘changing the filter’ online. Visit the

Knowledge Builder at www.jura.com.

Manual filter change

Clean machine

CAUTION

You can initiate the ‘Changing the filter’ operation manually.

Precondition: The filter is activated and display.

READY appears on the

M l Keep the Rotary Switch pressed until RINSE appears. M l Press the Rotary Switch to enter the programme item.

RINSE

Ä l Turn the Rotary Switch until FILTER appears. M l Press the Rotary Switch.

CHANGE

l Continue with the second prompt to take action

(indicated by a ‘Change following a prompt’.

After 200 coffee preparations or 80 switch-on rinses, the IMPRESSA will prompt you to clean it.

If the wrong cleaning agent is used, the machine could be damaged and/or traces of detergent could be left behind in the water.

l), as is described under

l Use only original JURA care products.

6 Maintenance

o The cleaning programme only lasts about 15 minutes. o Do not interrupt the cleaning programme. The quality of

cleaning will be impaired if you do so.

o JURA cleaning tablets are available from your stockist.

@ You can also try out the ‘Clean machine’ oper ation online. Visit

the Knowledge Builder at www.jura.com.

Cleaning following a prompt

Precondition:

maintenance button

CLEAN / READY appears on the display, and the

h lights up.

h l Press the maintenance button.

EMPTY TRAY

l Empty the drip tray and coffee grounds container and put

them back into the machine.

PRESS RINSE, the maintenance button h lights up.

l Place a receptacle (at least 500 ml) under the coffee spout.

h l Press the maintenance button.

CLEANING - Water flows out of the coffee spout.

The process is interrupted -

ADD TABLET.

l Open the cover of the filler funnel for pre-ground coffee.

l Insert a JURA cleaning tablet into the filler funnel. l Close the cover of the filler funnel.

PRESS RINSE, the maintenance button h lights up.

h l Press the maintenance button.

CLEANING

Water flows out of the coffee spout several times. The process is interrupted -

EMPTY TRAY.

l Empty the drip tray and coffee grounds container and put

them back into the machine. The cleaning operation is now complete. The IMPRESSA is ready for use again.

Manual cleaning

You can initiate the ‘C leaning the machine’ operation manually .

Precondition:

READY appears on the display.

M l Keep the Rotary Switch pressed until RINSE appears.

6 Maintenance

M l Press the Rotary Switch to enter the programme item.

RINSE

Ä l Turn the Rotary Switch until CLEAN appears. M l Press the Rotary Switch.

EMPTY TRAY

l Continue with the second prompt to take action (indicated

l), as is described under ‘Cleaning following a prompt’.

Descale machine

CAUTION

The IMPRESSA builds up deposits of limescale over time and automatically prompts you to descale it. The degree of calcification depends on the degree of hardness of your water.

If the descaling agent comes into contact with the skin or eyes, this can cause irritation.

l Avoid contact with the skin or eyes. l Rinse the descaling agent off with clean water . Should you get

any descaling agent in your eye, see a doctor.

If the wrong descaling agent is used, the machine could be damaged and/or traces of detergent could be left behind in the water.

l Use only original JURA care products.

If the descaling operation is interrupted, there may be damage to the machine.

l Allow the descaling program to run to the end.

If the descaling agent comes into contact with sensitive surfaces, damage cannot be ruled out.

l Clean up any splashes immediately.

o The descaling programme lasts approx. 40 minutes. o JURA descaling tablets are available from your stockist. o If you use a CLARIS filter cartridge and this is activated, you

will not be prompted to change the filter.

@ You can also try out the ‘Descale machine’ operation online.

Visit the Knowledge Builder at www.jura.com.

6 Maintenance

Descaling following a prompt

Precondition: DE-SCALE / READY appears on the display , and

the maintenance button

h lights up.

h l Press the maintenance button.

EMPTY TRAY

l Empty the drip tray and coffee grounds container and put

them back into the machine.

AGENT IN TANK

l Remove the water tank and empty it. l Completely dissolve the contents of one blister (3 JURA des-

caling tablets) in a container that holds 500 ml of water. This may take several minutes.

l Pour the solution into the empty water tank and insert it in

the machine.

AGENT IN TANK - The maintenance button h

lights up.

l Remove the nozzle. l Place a receptacle (at least 500 ml) under the Connector

System

h l Press the maintenance button.

DE-SCALING

This causes water to flow out of the Connector System©. The maintenance button blinks during the descaling operation. The operation stops automatically -

l Empty the container under the Connector System

EMPTY TRAY.

l Empty the drip tray and coffee grounds container and put

them back into the machine.

FILL WATER TANK

l Rinse the water tank thoroughly and fill it with cold, fresh

mains water.

l Put the water tank back in.

PRESS RINSE - The maintenance button h lights up.

l Place a container under the Connector System

h l Press the maintenance button.

This causes water to flow out of the Connector System The operation stops automatically –

EMPTY TRAY.

l Empty the drip tray and coffee grounds container and put

them back into the machine.

6 Maintenance

l Replace the nozzle.

The descaling operation is now complete. The IMPRESSA heats up and is ready for use again.

o If the descaling operation stops unexpectedly, rinse the water

tank thoroughly.

Manual descaling

Rinse Professional Cappuccino Frother

You can initiate the operation ‘Descaling the machine’ manually.

Precondition: activated.

READY appears on the display and the filter is not

M l Keep the Rotary Switch pressed until RINSE appears. M l Press the Rotary Switch to enter the programme item.

RINSE

Ä l Turn the Rotary Switch until DE-SCALE appears. M l Press the Rotary Switch.

EMPTY TRAY

l Continue with the second prompt to take action (indicated

by a

l), as is described under ‘Descaling following a

prompt’.

To ensure that the Professional Cappucc ino Frother works perf ectly , you should rinse it with water after every milk preparation.

o The IMPRESSA will not prompt you to rinse the Professional

Cappuccino Frother.

l Remove the milk pipe from the milk carton/bottle or the

milk container.

l Fill the receptacle with 250 ml of fresh water and immerse

the milk pipe in it.

l Place a receptacle under the Professional Cappuccino

Frother.

l Turn the selection lever to the milk or milk foam

position.

k l Press the steam button.

HEATING

READY

k l Press the steam button again.

STEAM - The nozzle and pipe are rinsed.

l Press any button as soon as clean water flows into the cup.

6 Maintenance

Clean Professional Cappuccino Frother

CAUTION

To ensure that the Professional Cappucc ino Frother works perf ectly , you should clean it daily when you have been preparing milk.

If the wrong cleaning agent is used, the machine could be damaged and/or traces of detergent could be left behind in the water.

l Use only original JURA care products.

o The IMPRESSA will not prompt you to clean the Professional

Cappuccino Frother.

o The JURA Cappuccino Cleaner is available from your stockist.

@ You can also try out the ‘Clean Professional Cappuccino

Frother’ operation online. Visit the Knowledge Builder at www.jura.com.

l Place a receptacle under the Professional Cappuccino

Frother.

l Pour 250 ml of fresh water into a container and add one

capful (max. 15 ml) of Auto-Cappuccino Cleaner.

l Immerse the milk pipe in the receptacle. l Turn the selection lever to the milk or milk foam

position.

k l Press the steam button.

HEATING

READY

k l Press the steam button again.

STEAM

Ä l Turn the Rotary Switch until 60 SEC appears on the

display.

6 Maintenance

Disassemble Professional Cappuccino Frother

STEAM – The nozzle and pipe are cleaned.

l Press any button as soon as the receptacle with the Auto-

Cappuccino Cleaner is empty.

l Rinse the receptacle thoroughly, fill it with 250 ml of fresh

water and immerse the milk pipe in it.

k l Press the steam button. ä l Turn the Rotary Switch until 60 SEC appears on the

display.

STEAM - The nozzle and pipe are rinsed with fresh water.

l Press any button as soon as the receptacle with the water is

empty.

l Carefully remove the Professional Cappuccino Frother from

the Connector System

l Disassemble the Professional Cappuccino Frother into its

components.

l Rinse all the nozzle parts thoroughly under running water. l Reassemble the Professional Cappuccino Frother and attach

it to the Connector System The cleaning of the Professional Cappuccino Frother is finished.

Cleaning the bean container

WARNING

Coffee beans may have a light layer of oil whic h remains on the walls of the bean container. These tr aces may negativ ely affect the coffee results. For this reason, clean the bean container from time to time.

Danger of injury to the fingers when the grinder is running.

l Switch the machine off with the on/off button g before per-

forming any work on the grinder.

l Switch the machine off at the power switch e.

Precondition:

FILL BEANS is displayed.

l Open the cover of the bean container and remove the aroma

preservation cover.

6 Maintenance

l Loosen the screw in the beam container and lift up the finger

protection.

l Remove the remaining beans with a vacuum cleaner. l Clean the bean container with a soft, dry cloth. l Put the finger protection down again and screw it back

tightly in place.

l Fill the bean container with coffee beans, then close the

aroma preservation cover and the bean container cover. The cleaning of the bean container is now complete.

Descaling the water tank

The water tank may build up deposits of limescale. In order to ensure perfect working order, descale the water tank from time to time.

l Remove the water tank. l If you use a CLARIS filter cartridge, remove this. l Descale the tank with a mild, commercially available descal-

ing agent in accordance with the instructions of the manufacturer.

l Rinse the water tank with clean water afterwards. l If you use a CLARIS filter cartridge, insert this again. l Fill the water tank with fresh water. l Insert it again.

7 Display messages

Message Cause/Result Action

EMPTY TRAY

FILL WATER TANK

EMPTY GROUNDS

TRAY MISSING

FILL BEANS

CLEAN

DE-SCALE

FILTER

The drip tray is full.You cannot prepare any coffee or hot water or milk products.

Water tank is empty. You cannot prepare any coffee specialities or hot water or milk products.

The coffee grounds container is full. You cannot prepare any coffee specialities, but you can prepare hot water or milk.

The drip tray is not inserted correctly or is not inserted at all. You cannot prepare any coffee specialities or hot water or milk products.

Bean container is empty. You cannot prepare any coffee specialities, but you can prepare hot water or milk.

The IMPRESSA is prompting you to clean it.

The IMPRESSA is prompting you to descale it.

The CLARIS filter cartridge is used up.

l Empty the drip tray.

l Fill the water tank (See

Chapter 2, ‘Preparing and using for the first time – Filling the water tank’).

l Empty the coffee grounds

container and the drip tray.

l Insert the drip tray. l Clean the metal contacts on

the back of the drip tray.

l Fill the bean container

(See Chapter 2, ‘Preparing and using for the first time – Filling the bean container’).

l Clean the machine (See

Chapter 6, ‘Maintenance – Cleaning the machine’).

l Descale the machine (See

Chapter 6, ‘Maintenance – Cleaning the machine’).

l Change the CLARIS filter

cartridge (See Chapter 6, ‘Maintenance – Changing the filter’).

Message Cause/Result Action

CLOSE COVER

NOT ENOUGH

PRE-GROUND

TOO HOT

The cover for pre-ground coffee is open.

There is too little pre-ground coffee in the filler funnel. The IMPRESSA stops the operation.

System is too hot to begin a maintenance programme.

l Close the cover for

pre-ground coffee.

l The next time you prepare

coffee, fill in more pre-ground coffee (see Chapter 4, ‘Preparation at the touch of a button – Pre-ground coffee’).

l Prepare a coffee speciality or

hot water.

7 Display messages

8 Troubleshooting

Problem Cause/Result Action

Grinder is making a very loud noise.

The frother does not produce enough milk foam.

Coffee only comes out in drips when it’s being prepared.

Water hardness cannot be adjusted.

FILL BEANS is

displayed although the bean container has been filled.

FILL BEANS is not

displayed although the bean container is empty.

EMPTY TRAY is always

displayed.

FILL WATER TANK is

displayed although the water tank is full.

There are foreign objects in the grinder.

The Professional Cappuccino Frother is dirty.

Coffee or pre-ground coffee has been ground too finely and is blocking the sieve.

CLARIS filter cartridge is now activated.

The grinder is not yet completely filled with beans.

The bean monitor is dirty.

The metal contacts of the drip tray are dirty or wet.

The water tank float is stuck.

l Contact Customer Support in your coun-

try (see ‘JURA contact details / Legal information’).

l Clean the Professional Cappuccino

Frother (see Chapter 6, ‘Maintenance – Rinsing the Professional Cappuccino Frother’).

l Put the grinder on a coarser setting or

use coarser pre-ground coffee (see Chapter 2, ‘Preparing and using for the first time – Adjusting grinder’).

l Deactivate the CLARIS filter cartridge.

l Prepare a coffee speciality.

l Clean the bean container

(see Chapter 6, ‘Maintenance – Cleaning the bean container’).

l Clean the metal contacts on the back of

the drip tray.

l Descale the water tank (see Chapter 6,

‘Maintenance – Descaling the water tank’).

Problem Cause/Result Action

ERROR 2 is displayed. If the device was

exposed to the cold for a long period of time, it is disabled from heating up due to safety reasons.

Other

ERROR messages

are displayed.

–

l Warm up the device at room

temperature.

l Turn your IMPRESSA off at the power

switch. Contact Customer Support in your country (see ‘JURA contact details / Legal information’).

o If you have not been able to solve the problem, contact

Customer Support in your country (see ‘JURA contact details / Legal information’).

8 Troubleshooting

9 Transport and environmentally neutral disposal

Transport / Empty system

Disposal

Keep the packaging for your IMPRESSA. It is used to protect the machine during transportation.

In order to protect the IMPRESSA from frost during transportation, the system must be emptied.

Precondition: The IMPRESSA must be switched off (standby).

l Remove the water tank. l Place a receptacle under the nozzle.

h l Press the maintenance button until EMPTYING is

displayed. Water will flow out a little bit at the nozzle. The operation stops automatically. The IMPRESSA will switch itself off.

e l Turn your IMPRESSA off at the power switch.

o The next time you use the machine, you will need to refill the

system (see Chapter 2, ‘Preparing and using your IMPRESSA for the first time – First-time use’).

Please dispose of old machines in an environmentally neutral way.

Old machines contain valuable materials capable of being recycled which should be salvaged for recycling. Please therefore dispose of old machines via suitable collection systems.

10 Technical data

Voltage

Safety test Power consumtion in

standby mode Power

Power consumption

230 V AC, 50 Hz 120 V AC, 60 Hz 220 – 240 V AC, 50 Hz 220 V AC, 50 Hz

2.8 Wh

1450 W 12 Wh

SAVE -

Power consumption

7 Wh

SAVE √

Pump pressure Static max. 15 bar Holding capacity of

water tank Holding capacity of bean

container Holding capacity of coffee

grounds container Cable length Approx. 1.1 m Weight 10.75 kg Dimensions (W x H x D) 28.5 x 34.2 x 43.3 cm

2.1 l

250 g

Approx. 16 servings

Index

Index A

Activating

Filter 18 Addresses 60 Adjusting

Amount of water 35

Coffee strength 35

Energy-saving mode 36

Grinder 20

Strength 35

Temperature 35

Water hardness 19 Aroma preservation cover 7

Bean container 7

Cleaning 49

Filling 16 Button

Maintenance 8

On/off 8

Cappuccino 31 Care status

query 28 CLARIS filter cartridge 18

Activating 18

Change 42

Inserting 18 Clean

Bean container 49

Machine 43

Professional Cappuccino Frother 47 Coffee 30

Pre-ground 32 Coffee beans

Filling 16 Coffee grounds container 7 Coffee speciality 30 Coffee spout

Height- and width-adjustable 15

Rinse 41 Connector System Contact details 60 Control elements 14 Customer support 60

Descale

Machine 45 Water tank 50

Display

Plain text 7

Drip tray 7

Energy Save Mode

Adjusting 36

Espresso 30

Filling

Bean container 16 Water tank 16

Filter

Activating 18 Change 42 Inserting 18

First-time use 17

Grinder

Adjusting 20

Ground coffee 32

Hotline 60 Hot water 34

Information

Query 28

Inserting

Filter 18 Water tank 16

Internet 15

JURA contact details 60

Language

Setting 40

Legal information 60

Index

Machine

Clean 43 Descaling 45 Rinse 41 Set up 16 Switching off 21

Switching on 21 Maintenance 41 Milk

Milk pipe 7

Warm 33

Nozzle

Hot water nozzle 34 Number

Buttons, prepared 28

Maintenance programmes, executed 28

Plain text

Display 14 Preground

Coffee 32 Professional Cappuccino Frother 7

Clean 48

Disassemble 49

Rinse 47 Programmable

Automatic switch-off time 38

Permanent settings 35

Switch-on time 37 Programming mode 35

Amount of steam 35

Amount of water 35

Language 40

Strength 35

Temperature 35 Prompt to take action 13

Query

Care status 28

Information 28

Rinse

Machine 41 Professional Cappuccino Frother 47

Rotary Switch 8, 14

Safety 9 Settings

Amount of steam 35 Permanent settings in grogramming

mode 35 Setting the time 37 Specialities 30 Spout 15 Standby 21 Storage compartment 7 Switch-on time

Setting 37 Switching off machine 21 Switching on machine 21

Temperature

Adjusting 35

Units

Amount of water 39

Time format 39 Use

Proper 9

Voltage 56

Water hardness 19

Adjusting 19

Determining 19 Water tank 7

Descaling 50

Filling 16

Art. 66362/J5/en/200908

JURA contact details / Legal information

JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Phone: +41 62 38 98 233

@ Contact information is available on the company website at

www.jura.com.

Directives

Technical changes

Feedback

The machine complies with the following EU directives:

p 2006/95/EC – Low Voltage Directive p 2004/108/EC – Electromagnetic Compatibility

We reserve the right to make technical changes.

The illustrations used in the IMPRESSA J5 Manual show the IMPRESSA J5 Piano White model. Your IMPRESSA could incorporate minor changes.

Your opinion is important to us! Use the contact link at www.jura.com.

The Instructions for Use contain information which is protected by copyright. It is not permitted to photocopy or translate these Instructions for Use into another language without the express written consent of JURA Elektroapparate AG.

Jura IMPRESSA J5 Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual