Control elements 26
Proper use 28
For your safety 28
1 Preparing and using for the first time 29
JURA on the Internet ...........................................................................................................................................29
3-colour plain text display ..................................................................................................................................29
Filling the water tank ..........................................................................................................................................29
Filling the bean container ..................................................................................................................................29
First-time use ........................................................................................................................................................30
Using and activating filter ..................................................................................................................................30
Determining and adjusting the water hardness ............................................................................................. 31
Switching on the machine .................................................................................................................................32
Switching off the machine ................................................................................................................................. 32
Hot water (tea) ..................................................................................................................................................... 33
Energy Save Mode ...............................................................................................................................................34
Units of water ....................................................................................................................................................... 35
Language ...............................................................................................................................................................35
Rinsing the machine ...........................................................................................................................................36
Cleaning the machine .........................................................................................................................................36
Changing the filter............................................................................................................................................... 37
Descaling the machine .......................................................................................................................................38
Cleaning the bean container ............................................................................................................................39
Descaling the water tank ....................................................................................................................................39
5 Display messages 40
6 Troubleshooting 41
7 Transport and environmentally neutral disposal 42
Transport ...............................................................................................................................................................42
8 Technical data 42
Index 42
JURA contact details / Legal information 44
24
Symbol description
Warnings:
CAUTION
J
Always take note of any information
marked with the CAUTION or WARNING
symbol. The signal word WARNING
points out potential risk of serious
injury, and the signal word CAUTION
potential risk of slight injury.
CAUTION
The CAUTION symbol is used to draw
attention to circumstances which could
result in damage to the machine.
ENA X1
Symbols used:
Prompt to take action. This symbol
T
means that you are being prompted to
perform an action.
Information and tips to make use of
E
your ENA even easier.
@
References to the JURA website where
you can find interesting additional information: www.jura.com.
en
en
en
en
en
25
ENA X1
ENA
Control elements
1
2
3
4
6
7
8
9
10
5
Figure: ENA X1 Ristretto Black
1 Water tank
2 Filler funnel for cleaning tablet
3 Coffee grounds container
4 Drip tray
5 Cup platform
1 Q On/Off button
2 Grinding wheel
3 Cover
4 P P button
5 c Maintenance button
6 g Rotary Switch
7 Display
en
en
en
27
ENA X1
Proper use
This machine has been designed and built for
domestic and similar use, e.g. for customers in
hotels, motels and other residential facilities. It
should only be used to prepare coffee and to heat
water. Use for any other purpose will be deemed
improper. JURA Elektroapparate AG cannot accept
any responsibility for the consequences of
improper use.
Before using the machine always carefully read
and comply with all these instructions. Keep this
manual close to the ENA and pass it on to the
next user if applicable.
For your safety
Please read and note the following important
safety information carefully.
This can prevent potentially fatal injury due to
electric shock:
Never use a machine which has been
Z
damaged or which has a defective power
cable.
If there are any signs of damage, for example
Z
if there is a smell of burning, unplug the
machine from the mains supply immediately
and contact the JURA service centre.
If the power cable for this machine is
Z
damaged, it must be repaired either directly
by JURA or by a JURA approved service centre.
Make sure that the ENA and the power cable
Z
are not located close to hot surfaces.
Be careful to ensure that the power cable
Z
does not become trapped and does not rub
against sharp edges.
Never open and repair the machine yourself.
Z
Do not modify the machine in any way that is
not described in the ENA manual. The
machine contains live parts. If opened, there
is a danger of fatal injury. Repairs may only be
carried out by JURA approved service centres,
using original spare parts and accessories.
There is a risk of scalds and burns from the spouts
or the nozzle:
Place the machine out of the reach of
Z
children.
Do not touch any hot parts. Use the handles
Z
provided.
Be careful to ensure that the appropriate
Z
nozzle is correctly installed and clean. The
nozzle or parts of the nozzle could become
detached if the parts are not assembled
correctly or a blockage occurs.
A defective machine is not safe and could cause
injury or fire. To avoid damage and any associated
risk of injury or fire:
Never allow the power cable to hang down
Z
loosely. The power cable could trip someone
or be damaged.
Protect your ENA from environmental
Z
influences such as rain, frost and direct
sunlight.
Do not put the ENA, cable or connections in
Z
water.
Do not put the ENA or any individual parts in
Z
the dishwasher.
Turn your ENA off and disconnect the mains
Z
plug before starting any cleaning operation.
Always wipe your ENA with a damp cloth,
never a wet cloth, and protect it from
constant water splashes.
Only connect the machine to a power supply
Z
in accordance with the information on the
rating plate. The rating plate is located on the
underside of your ENA. Further technical
data is given in Chapter 8 ‘Technical data’.
Use only original JURA care products.
Z
Use of products that are not explicitly
recommended by JURA could damage
the ENA.
Do not use any coffee beans treated with
Z
additives or caramelised coffee beans.
Always fill the water tank with cold, fresh
Z
water.
If you are absent for a prolonged period of
Z
time, turn the machine off.
28
ENA X1
Risk to children and persons with limited
capabilities in operating machines:
The machine is not designed to be operated
Z
by children and persons with limited
capabilities.
The machine may only be used by persons
Z
who are able to operate the machine safely.
Safe handling of the CLARIS Blue filter cartridge:
CLARIS Blue filter cartridges should be kept
Z
out of the reach of children.
Store them dry in the sealed package.
Z
Protect them from heat and direct sunlight.
Z
Do NOT use damaged CLARIS Blue filter
Z
cartridges.
Do NOT open CLARIS Blue filter cartridges.
Z
1 Preparing and using for the first time
This chapter provides the information you need
for trouble-free use of your ENA and gives you a
step-by-step guide to preparing your ENA for your
first coffee experience.
Setting up
When setting up your ENA, please note the
following:
Place the machine on a horizontal surface
Z
that cannot be damaged by water.
Select a position for the ENA where it is
Z
protected against overheating.
Filling the water tank
To enjoy perfect coffee we recommend changing
the water every day.
CAUTION
Milk, mineral water or other liquids can damage
the water tank or the machine.
Only fill the water tank with fresh, cold
T
water.
Remove the water tank and rinse with cold
T
water.
Fill the water tank with cold, fresh water
T
and replace the tank.
Filling the bean container
en
en
JURA on the Internet
Visit us on the Internet.
At www.jura.com you will find the latest
@
interesting information about your ENA and
all facets of the world of coffee.
3-colour plain text display
Your ENA features a 3-colour plain text display.
The colours of the display texts have the following
meanings:
Green: Your ENA is ready for use.
Z
Red: The ENA is prompting you to perform an
Z
action.
Yellow: You are in programming mode.
Z
CAUTION
Coffee beans which have been treated with
additives (e.g. sugar), pre-ground or freeze-dried
coffee will damage the grinder.
Only use untreated coffee beans to refill the
T
bean container.
Remove the bean container cover.
T
Remove any dirt or foreign objects from
T
the bean container.
Fill the bean container with coffee beans.
T
Close the bean container.
T
en
en
en
29
ENA X1
First-time use
The On/Off button also acts as a power
E
switch. When the ENA is switched off, the
machine consumes no standby energy.
WARNING
J
If the machine is operated with a defective power
cable, there is a danger of electric shock.
Never use a machine which has a defective
T
power cable.
Precondition: The water tank must be full.
Insert the mains plug into a power socket.
T
Q T Press the On/Off button to switch the
machine on.
SPRACHE DEUTSCH
g T Turn the Rotary Switch until LANGUAGE
ENGLISH is displayed.
y T Turn the switch to position o.
HEATING
PRESS ROTARY
Place a receptacle under the coffee spout.
T
k T Press the Rotary Switch to start rinsing.
RINSING, the system is being rinsed.
Rinsing stops automatically.
READY
When a coffee speciality has been
E
prepared for the first time, it is possible
that FILL BEANS appears on the
display as the grinder has not yet been
completely filled with coffee beans. In this
case prepare a different coffee speciality.
Using and activating filter
Your ENA no longer requires descaling if you use
CLARIS Blue filter cartridges.
Perform the ‘Insert filter’ operation without
E
interruptions. This will ensure optimum
function of your ENA.
After two months the filter capacity is
E
reached. The elapsed time can be checked
with the date plate on the filter holder.
k T Press the Rotary Switch to confirm the
language setting.
OK, the language is then adjusted.
OPEN TAP
Place a receptacle under the nozzle.
T
l T Turn the switch to position m.
SYSTEM FILLING
CLOSE TAP
30
Precondition: READY is shown on the display.
Open the cover behind the Rotary Switch.
T
Press the P button P and the Maintenance
T
button c simultaneously untilRINSE
appears.
g T Turn the Rotary Switch until FILTER - is
displayed.
k T Press the Rotary Switch to enter theto enter the
programme item.
NO -
g T Turn the Rotary Switch until YES p
appears.
k T Press the Rotary Switch to confirm theto confirm the
setting.
OK
INSERT FILTER
Remove and empty the water tank.
T
Open the filter holder.
T
Insert the new filter cartridge into the water
T
tank, pressing it slightly.
Close the filter holder. It will click into place
T
audibly.
Fill the water tank with cold, fresh water
T
and replace the tank.
Place a receptacle (at least 500 ml) under
T
the nozzle.
k T Press the Rotary Switch.
OPEN TAP
l T Turn the switch to position m.
FILTER RINSING, water is discharged
from the nozzle.
Rinsing of the filter can be interrupted at
E
any time. To this purpose turn the switch
clockwise. To continue rinsing of the filter,
turn the switch to position m.
The water may be slightly discoloured. This
E
is not harmful to health and does not affect
the taste.
Rinsing of the filter stops automatically,
CLOSE TAP.
y T Turn the switch to position o.
HEATING
READY
The filter is now activated.
Determining and adjusting the water
hardness
The harder the water, the more frequently the
ENA requires descaling. It is therefore important
to adjust the water hardness.
ENA X1
It is not possible to adjust the water
E
hardness if the CLARIS Blue filter cartridge
is used and activated.
The water hardness can be adjusted
E
between 1° dH and 30° dH. It can also be
deactivated, which means that the ENA will
not indicate when it has to be descaled.
The Aquadur® test strip supplied as standard can
be used to determine the water hardness.
Hold the test strip briefly (for one second)
T
under running water.
Shake off the water.
T
Wait for approximately 1 minute.
T
Read the degree of water hardness from the
T
discolouration of the Aquadur® test strip
and the description on the packaging.
The water hardness can then be adjusted.
Example: Changing the water hardness from
16°dH to 25°dH.
Precondition: READY is shown on the display.
Open the cover behind the Rotary Switch.
T
Press the P button P and the Maintenance
T
button c simultaneously until RINSE
appears.
g T Turn the Rotary Switch until HARDNESS
is displayed.
k T Press the Rotary Switch to enter the
programme item.
16°dH
g T Turn the Rotary Switch until 25°dH is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the water hardness is then adjusted.
HARDNESS
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit program-
ming mode.
READY
en
en
en
en
en
31
ENA X1
Adjusting grinder
You can adjust the grinder continuously to suit
the roast of your coffee.
CAUTION
If you adjust the fineness of grind when the
grinder is not operating, the grinding wheel could
be damaged.
Only adjust the fineness of grind when the
T
grinder is running.
The fineness of grind setting is correct if the
coffee flows regularly from the coffee spout. A
fine, thick crema is also formed.
Example: Adjusting the fineness of grind during
coffee preparation.
Place the cup under the coffee spout.
T
k T Press the Rotary Switch to start coffee
preparation.
Turn the fineness of the grinding wheel to
T
the desired position while the grinder is
running.
Q T Press the On/Off button to switch the
ENA on.
HEATING
RINSING, the system is being rinsed. The
operation stops automatically.
READY
Switching off the machine
When the ENA is switched off, the system is
automatically rinsed if a coffee speciality has been
prepared.
Place a receptacle under the coffee spout.
T
Turn the coffee spout to the cleaning
T
position.
Q T Press the On/Off button.
RINSING, the system is being rinsed, the
operation stops automatically. The ENA is
switched off.
Turn the coffee spout to the 1 cup or 2 cup
T
position.
COFFEE, the pre-set amount of water
flows into the cup, preparation stops
automatically.
READY
Switching on the machine
When the ENA is switched on, a switch-on rinse
starts automatically.
Place a receptacle under the coffee spout.
T
32
The On/Off button also acts as a power
E
switch. When the ENA is switched off, the
machine consumes no standby energy.
2 Preparation
Coffee
During preparation, you can interrupt the
E
machine at any time. To do this, press the
Rotary Switch.
ENA X1
Precondition: READY is shown on the display.
Turn the coffee spout to the 1 cup position.
T
Place the cup under the coffee spout.
T
k T Press the Rotary Switch to start coffee
preparation.
COFFEE, the pre-set amount of water
flows into the cup. You can follow the
current status of preparation on the
progress bar.
Preparation stops automatically.
READY
Hot water (tea)
CAUTION
J
There is a danger of scalding from hot water
splashes.
Avoid direct contact with the skin.
T
Precondition: READY is shown on the display.
Place a cup under the nozzle.
T
l T Turn the switch to position m.
TEA, hot water flows into the cup.
You can follow the current status of
preparation on the progress bar.
Preparation stops automatically, CLOSE
TAP.
y T Turn the switch clockwise.
READY
3 Permanent settings in programming
mode
Products
The following settings can be programmed for
COFFEE and TEA:
Coffee:
Z
Amount of water: 25 ML – 240 ML
U
Coffee strength: MILD, NORMAL,
U
STRONG
Temperature: NORMAL, HIGH
U
Tea:
Z
Amount of water: 25 ML – 240 ML
U
Permanent settings in programming mode always
follow the same model.
Example: Changing the permanent setting for the
coffee strength (AROMA) of COFFEE from
the energy-saving temperature and is not
ready for use.
Before coffee or hot water is prepared, the
U
machine heats up.
Example: Changing the energy-saving mode from
ENERGY p to ENERGY -.
Precondition: READY is shown on the display.
Open the cover behind the Rotary Switch.
T
Press the P button P and the Maintenance
T
button c simultaneously until RINSE
appears.
g T Turn the Rotary Switch until ENERGY p is
displayed.
k T Press the Rotary Switch to enter the
programme item.
ECONOMY p
g T Turn the Rotary Switch until ECONOMY -
is displayed.
34
k T Press the Rotary Switch to confirm the
setting.
OK
ENERGY -
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit program-
ming mode.
READY
Automatic switch-off
You can save energy with the automatic switchoff function on the ENA. If this function is
activated, your ENA switches off automatically
after the pre-set time following the last action on
the machine.
The automatic switch-off time can be
E
adjusted between 0.5 and 9 hours or
deactivated.
Example: Changing the automatic switch-off time
from 2HRS to 1HRS.
Precondition: READY is shown on the display.
Open the cover behind the Rotary Switch.
T
Press the P button P and the Maintenance
T
button c simultaneously until RINSE
appears.
g T Turn the Rotary Switch until OFF AFTER
is displayed.
k T Press the Rotary Switch to enter the
programme item.
2 HRS
g T Turn the Rotary Switch until 1 HRS is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the automatic switch-off time is then
adjusted.
OFF AFTER
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit program-
ming mode.
READY
ENA X1
Switch-on rinse
In the programme item INIT RINSE the
following settings can be made:
MANUAL: The switch-on rinse has to be
Z
started manually.
AUTOMATIC: The switch-on rinse starts
Z
automatically.
Example: Changing the setting from
AUTOMATIC to MANUAL.
Precondition: READY is shown on the display.
Open the cover behind the Rotary Switch.
T
Press the P button P and the Maintenance
T
button c simultaneously until RINSE
appears.
g T Turn the Rotary Switch until INIT
RINSE is displayed.
k T Press the Rotary Switch to enter the
programme item.
AUTOMATIC
g T Turn the Rotary Switch until MANUAL is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK
INIT RINSE
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit program-
ming mode.
READY
Units of water
The unit for the amount of water can be displayed
in either ‘ml’ or ‘oz’.
Example: Changing the units of water from
ML to OZ.
Precondition: READY is shown on the display.
Open the cover behind the Rotary Switch.
T
Press the P button P and the Maintenance
T
button c simultaneously until RINSE
appears.
g T Turn the Rotary Switch until UNIT is
displayed.
k T Press the Rotary Switch to enter the
programme item.
ML
g T Turn the Rotary Switch until OZ is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the units of water are then adjusted.
UNIT
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit program-
ming mode.
READY
Language
The language is selected when the machine is
used for the first time.
Example: Changing the language from
ENGLISH to DEUTSCH.
Precondition: READY is shown on the display.
Open the cover behind the Rotary Switch.
T
Press the P button P and the Maintenance
T
button c simultaneously until RINSE
appears.
g T Turn the Rotary Switch until LANGUAGE
is displayed.
k T Press the Rotary Switch to enter the
programme item.
ENGLISH
g T Turn the Rotary Switch until DEUTSCH is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the language is then adjusted.
SPRACHE
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit program-
ming mode.
BEREIT
en
en
en
en
en
35
ENA X1
4 Rinse
The ENA has the following integrated rinse
programmes:
Rinse machine
Z
Clean machine
Z
Change filter
Z
Descale machine
Z
Clean or descale the machine or change the
E
filter whenever the appropriate indicator
lights up.
Rinse tips
To ensure a long service life and the best possible
coffee quality, the ENA requires the following daily
care:
Empty the coffee grounds container and drip
Z
tray and rinse with warm water.
Rinse the water tank with clean water.
Z
Wipe the surface of the machine with a damp
Z
cloth.
Rinse the nozzle regularly if it is used to warm
Z
or froth milk.
Rinsing the machine
The ‘Rinse machine’ operation can be manually
initiated.
Precondition: READY is shown on the display.
Place a receptacle under the coffee spout.
T
Turn the coffee spout to the cleaning
T
position.
Open the cover behind the Rotary Switch.
T
Press the P button P and the Maintenance
T
button c simultaneously until RINSE
appears.
k T Press the Rotary Switch to enter the
programme item.
RINSE
k T Press the Rotary Switch to start rinsing.
RINSING, rinsing stops automatically.
READY
Turn the coffee spout to the 1 cup position.
T
Cleaning the machine
After 180 coffee preparations or 80 switch-on
rinses, the ENA will prompt you to clean the
machine. The ‘Clean machine’ operation can also
be manually initiated.
CAUTION
If the wrong cleaning agent is used, the machine
could be damaged and/or detergent residues
could be left in the water.
Only use original JURA care products.
T
The cleaning programme only lasts about
E
15 minutes.
Do not interrupt the cleaning programme.
E
The quality of cleaning will be impaired if
you do so.
JURA cleaning tablets are available from
E
stockists.
Precondition: CLEAN / READY or READY is
displayed.
Open the cover behind the Rotary Switch.
T
Press the P button P and the Maintenance
T
button c simultaneously until RINSE
appears.
k T Press the Rotary Switch to enter the
programme item.
RINSE
g T Turn the Rotary Switch until CLEAN is
displayed.
36
ENA X1
k T Press the Rotary Switch.
EMPTY TRAY
Empty the coffee grounds container and
T
drip tray and replace.
PRESS ROTARY
Turn the coffee spout to the cleaning
T
position.
Place a receptacle under the coffee spout.
T
k T Press the Rotary Switch to start cleaning.
CLEANING, water flows out of the coffee
spout.
The process is interrupted.
ADD TABLET
Open the filler funnel for cleaning tablet
T
and drop in a JURA cleaning tablet.
Close the filler funnel.
T
PRESS ROTARY
k T Press the Rotary Switch.
CLEANING, water flows out of the coffee
spout several times.
EMPTY TRAY
Empty the coffee grounds container and
T
drip tray and replace.
READY
Turn the coffee spout to the 1 cup position.
T
Changing the filter
After 50 litres of water have flowed through
E
the filter, its capacity is reached. The ENA
automatically prompts you to replace the
filter.
After two months the filter capacity is
E
reached. The elapsed time can be checked
with the date plate on the cartridge holder.
If the CLARIS Blue filter cartridge is not
E
activated, you will not be prompted to
change the filter.
The ‘Change filter’ operation can be manually
initiated.
Precondition: READY / FILTER or READY is
displayed.
Open the cover behind the Rotary Switch.
T
Press the P button P and the Maintenance
T
button c simultaneously until RINSE
appears.
k T Press the Rotary Switch to enter the
programme item.
RINSE
g T Turn the Rotary Switch until FILTER is
displayed.
k T Press the Rotary Switch.
INSERT FILTER
Remove and empty the water tank.
T
Open the filter holder and remove the old
T
filter cartridge.
Insert the filter cartridge into the water
T
tank, exerting slight pressure.
Close the filter holder. It will click into place
T
audibly.
en
en
en
en
en
37
ENA X1
Fill the water tank with cold, fresh water
T
and replace the tank.
Place a receptacle (at least 500 ml) under
T
the nozzle.
k T Press the Rotary Switch.Press the Rotary Switch.
OPEN TAP
l T Turn the switch to position m.
FILTER RINSING, water is discharged
from the nozzle.
Rinsing of the filter can be interrupted at
E
any time. To this purpose turn the switch
clockwise. To continue rinsing of the filter,
turn the switch to position m.
The water may be slightly discoloured. This
E
is not harmful to health and does not affect
the taste.
Rinsing of the filter stops automatically,
CLOSE TAP.
y T Turn the switch to position o.
HEATING
READY
Descaling the machine
The ENA builds up limescale deposits over time
and automatically prompts you to descale the
machine when necessary. The degree of build-up
depends on the hardness of the water. The
‘Descale machine’ operation can be manually
initiated.
CAUTION
J
If the descaling agent comes into contact with the
skin or eyes, this can cause irritation.
Avoid contact with the skin or eyes.
T
If descaling agent does come into contact
T
with the skin or eyes, rinse off with clean
water. Should you get any descaling agent
in your eye, see a doctor.
CAUTION
Risk of damage to the machine and residues in
the water if the wrong descaling agent is used.
Only use original JURA care products.
T
CAUTION
Risk of damage to the machine if the descaling
operation is interrupted.
Do not interrupt the descaling operation.
T
CAUTION
Risk of damage if the descaling agent comes into
contact with sensitive surfaces.
Remove splashes immediately.
T
The descaling programme lasts approx.
E
40 minutes.
JURA descaling tablets are available from
E
stockists.
If a CLARIS Blue filter cartridge is used
E
and activated, you will not be prompted
to descale the machine.
Precondition: DE-SCALE / READY or
READY is displayed.
Open the cover behind the Rotary Switch.
T
Press the P button P and the Maintenance
T
button c simultaneously until RINSE
appears.
k T Press the Rotary Switch to enter the
programme item.
RINSE
g T Turn the Rotary Switch until DE-SCALE
is displayed.
k T Press the Rotary Switch.
EMPTY TRAY
Empty the coffee grounds container and
T
drip tray and replace.
AGENT IN TANK
Remove and empty the water tank.
T
Completely dissolve the contents of one
T
blister (3 JURA descaling tablets) in a
38
container holding 500 ml of water. This
may take several minutes.
Coffee beans may be covered with a slight oil film
which remains on the walls of the bean container.
These residues may negatively affect the coffee
results. For this reason clean the bean container
from time to time.
Q T Press the On/Off button to switch the
machine off.
Disconnect the mains plug.
T
Remove the bean container cover.
T
Remove the coffee beans with a vacuum
T
cleaner.
Clean the bean container with a soft, dry
T
cloth.
Fill the bean container with fresh coffee
T
beans, then close the bean container cover.
Descaling the water tank
Limescale deposits may form in the water tank.
To ensure correct function of the machine,
descale the water tank from time to time.
Remove the water tank.
T
If a CLARIS Blue filter cartridge is used,
T
remove the cartridge.
Descale the tank with a mild, commercially
T
available descaling agent in accordance
with the instructions of the manufacturer.
Rinse the water tank thoroughly.
T
If a CLARIS Blue filter cartridge is used,
T
replace the cartridge.
Fill the water tank with cold, fresh water
T
and replace the tank.
en
en
en
en
en
39
ENA X1
5 Display messages
MessageCause/ResultAction
FILL WATER TANK
EMPTY GROUNDS
TRAY MISSING
FILL BEANS
READY / CLEANThe ENA is prompting you to
READY / DE-SCALEThe ENA is prompting you to
READY / FILTEROnce 50 litres of water have
The water tank is empty.
You cannot prepare coffee nor
hot water.
The coffee grounds container is
full. You cannot prepare coffee,
but you can prepare hot water.
The drip tray is not inserted
correctly or is not inserted at all.
You cannot prepare coffee nor
hot water.
The bean container is empty.
You cannot prepare coffee nor
hot water.
clean the machine.
descale it.
flowed through the CLARIS Blue
filter cartridge, its capacity is
reached.
Fill the water tank (refer to
T
Chapter 1 ‘Preparing and using
for the first time – Filling the
water tank’).
Empty the coffee grounds
T
container and the drip tray.
Insert the drip tray.T
Fill the bean container (refer to
T
Chapter 1 ‘Preparing and using
for the first time – Filling the
bean container’).
Clean the machine (refer to
T
Chapter 4 ‘Rinse – Cleaning the
machine’).
Descale the machine (refer to
T
Chapter 4 ‘Rinse – Descaling the
machine’).
Replace the CLARIS Blue filter
T
cartridge (refer to Chapter 4
‘Rinse – Replacing the filter’).
40
6 Troubleshooting
ProblemCause/ResultAction
Coffee only comes out in
drips during preparation.
Water hardness cannot be
adjusted.
FILL BEANS is displayed
although the bean container
has been filled.
FILL WATER TANK is
displayed although the water
tank is full.
Grinder is making a very
loud noise.
ERROR 2 is displayed.If the device is exposed to
Other ERROR messages are
displayed.
Coffee has been ground
too finely and is blocking
the system.
The CLARIS Blue filter
cartridge is activated.
The grinder is not yet
completely filled with
beans.
The water tank float is
trapped.
There are foreign objects
in the grinder.
the cold for a long period
of time, the heating
function is disabled for
safety reasons.
–Switch the ENA off with the On/Off
Put the grinder on a coarser setting (see
T
Chapter 1, ‘Preparing and using for the
first time – Adjusting grinder’).
Deactivate the CLARIS Blue filter
T
cartridge in programming mode.
Prepare a coffee.T
Descale the water tank (refer to
T
Chapter 4 ‘Rinse – Descaling
the water tank’).
Contact your JURA service partner. The
T
contact details are given in the ‘JURA
contact details / Legal information’
section on the last page of these
instructions.
Wait until the machine has reached
T
room temperature.
T
button. Contact your JURA service
partner. The contact details are given in
the ‘JURA contact details / Legal information’ section on the last page of these
instructions.
ENA X1
en
en
en
If it was not possible to remedy the
E
problem, please contact your JURA service
partner. The contact details are given in the
‘JURA contact details / Legal information’
section on the last page of these instructions.
en
en
41
ENA X1
7 Transport and environmentally
neutral disposal
Index
Transport
Keep the packaging of your ENA. It should be
used to protect the machine during transportation.
Disposal
Please dispose of old machines in an environmentally neutral way.
H
Old machines contain valuable materials which
should be salvaged for recycling. Please therefore
dispose of old machines via your regional
collection system.
8 Technical data
Voltage220–240 V ~, 50 Hz
Power1450 W
Safety test
Power consumption
ECONOMY -
Power consumption
ECONOMY p
Pump pressureStatic max. 15 bar
Holding capacity of
water tank
Holding capacity of bean
container
Holding capacity of
coffee grounds container
Cable lengthApprox. 1.1 m
WeightApprox. 9.3 kg
Dimensions (W x H x D)23.8 x 36 x 44.5 cm
S
Approx. 13.5 Wh
Approx. 8 Wh
1.1 l
125 g
Approx. 10 servings
3-colour plain text display 29
A
Adjusting
Energy-saving mode 34
Grinder 32
Language 35
Units of water 35
Further contact information is available on
the company website at www.jura.com.
Directives
The machine complies with the following EU
directives:
Z
2006/95/EG – Low Voltage Directive
Z
2004/108/EG – Electromagnetic Compatibility
Z
2005/32/EG – Energy Directive
Technical changes
We reserve the right to make technical changes.
The illustrations used in the ENA Instructions
for Use show the ENA X1 Ristretto Black model.
Your ENA could incorporate minor changes.
Feedback
Your opinion is important to us!
Use the contact link at www.jura.com.
Copyright
The Instructions for Use contain information
which is protected by copyright. It is not permitted to photocopy or translate these Instructions
for Use into another language without the express
written consent of JURA Elektroapparate AG.
44
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.