Jura ENA Micro 9 ONE Touch User Manual

Download

Page 1

micro 9

Instructions for use for ENA Micro 9 One Touch

For your safety: read and understand manual before use.

Page 2

Table of contents

Your ENA Micro 9 One Touch

IMPORTANT SAFEGUARDS 4

Control elements 8

1 Preparing and using for the first time 10

JURA on the Internet ............................................................................................................................................. 10

3-color plain text display ...................................................................................................................................... 10

Setting up the machine ........................................................................................................................................ 10

Filling the bean container .................................................................................................................................... 10

First-time use .......................................................................................................................................................... 10

First-time use with filter cartridge activation .................................................................................................... 11

First-time use without filter cartridge activation ..............................................................................................12

Determining the water hardness .........................................................................................................................13

Adjusting the grinder ............................................................................................................................................ 14

Filling the water tank ............................................................................................................................................ 14

2 Preparation 14

Espresso, coffee .......................................................................................................................................................15

Latte macchiato, cappuccino ................................................................................................................................15

Permanently setting the amount of water for the cup size ........................................................................... 16

Ground coffee ......................................................................................................................................................... 16

Hot water..................................................................................................................................................................17

3 Daily operation 17

Switching on the machine ....................................................................................................................................17

Daily maintenance ..................................................................................................................................................17

Switching off the machine ....................................................................................................................................17

4 Permanent settings in programming mode 18

Products .................................................................................................................................................................. 18

Setting the water hardness .................................................................................................................................. 18

Energy-saving mode ............................................................................................................................................. 19

Automatic switch-off ............................................................................................................................................. 19

Rinses ...................................................................................................................................................................... 20

Unit for amount of water .................................................................................................................................... 20

Language ................................................................................................................................................................. 21

5 Maintenance 21

Rinsing the machine ............................................................................................................................................. 21

Rinsing the milk system .......................................................................................................................................22

Cleaning the milk system .....................................................................................................................................22

Dismantling and rinsing the dual spout ............................................................................................................23

Inserting and activating the filter .......................................................................................................................24

Changing the filter.................................................................................................................................................24

Cleaning the machine ...........................................................................................................................................25

Descaling the machine ........................................................................................................................................26

Descaling the water tank ......................................................................................................................................27

Cleaning the bean container ...............................................................................................................................27

Page 3

Table of contents

6 Display messages 28

7 Troubleshooting 29

8 Transport and environmentally friendly disposal 30

Transport / Emptying the system .......................................................................................................................30

Disposal ...................................................................................................................................................................30

9 Technical data 30

10 Index 31

11 JURA contact details / Legal information 33

Symbol description

Warnings

This is the safety alert symbol. lt is used to alert you to potential personal injury

J DANGER

J WARNING

J CAUTION

NOTICE

hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE is used to address practices not related to personal injury.

Symbols used

T Prompt to take action. This symbol means that you are being prompted to perform

some action.

E Information and tips to make it even easier to use your ENA.

READY

Display message

Page 4

IMPORTANT SAFEGUARDS

Follow the basic safety

precautions

When using electrical appliances, basic safety precautions shall always be followed, to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

Z Read all instructions. Z Do not touch hot surfaces. Use handles or knobs. Z To protect against fire, electric shock and injury to persons, do not

immerse power cord, plugs, or body of machine in water or other liquid.

Z Close supervision is necessary when any appliance is used by or

near children.

Z Unplug from outlet when not in use and before cleaning. Allow to

cool before putting on or taking off parts, and before cleaning the appliance.

Z Do not operate any appliance with a damaged cord or plug or

after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment.

Z The use of an accessory attachment not recommended by the

appliance manufacturer may result in fire, electric shock, or injury to persons.

Z Do not use outdoors. Z Do not let the cord hang over the edge of a table or counter, or

touch hot surfaces.

Z Do not place on or near a hot gas or electric burner, or in a heated

oven.

Z To disconnect, turn any control to ‘OFF’ then remove plug from

wall outlet.

Z Do not use appliance for other than intended use. Z Use extreme caution when dispensing hot steam, hot water or

hot coffee.

Z For household use only.

SAVE THESE INSTRUCTIONS.

Pass them on to any subsequent user.

Page 5

IMPORTANT SAFEGUARDS

Intended use

Special power cord set

instructions

The appliance is designed and intended for household use only. It shall only be used for coffee preparation and to heat milk and water, according to these instructions. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility for the consequences of improper use.

People, including children, who

Z do not have the physical, sensory or mental capabilities to use

the appliance safely or

Z are inexperienced or lack knowledge in how to use the appliance

safely must be supervised by a responsible person when using it, or must be instructed in how to use it correctly.

Z The power cord is provided to reduce the risk resulting from

becoming entangled in or tripping over a long cord.

Z The cord shall be arranged so that it will not drape over the

counter top or table top where it can be pulled on by children or

tripped over.

Z This appliance has a 3-pin grounded plug. Z Do not modify the plug in any way.

Do NOT use extension cords. If the user chooses to use an extension cord,

Z the marked electrical rating of the extension cord shall be at least

as great as the electrical rating of the appliance, and

Z if the appliance is of the grounded type, the extension cord shall

be a grounding type 3-wire cord, and

Z the longer cord shall be arranged so that it will not drape over the

counter top or tabletop where it can be pulled on by children or

tripped over.

J WARNING

To reduce the risk of fire or electric shock, DO NOT remove any service covers. DO NOT modify the appliance in any way that is not described in these instructions. NO user serviceable parts included. Repair MUST be done by authorized personnel only.

In the event of signs of damage, for example if there is a smell of burning, unplug the machine immediately from outlet and contact JURA customer service.

Page 6

IMPORTANT SAFEGUARDS

J CAUTION

NOTICE

NEVER DO

(or you will void your

warranty protection):

This appliance is for household use. Any servicing other than cleaning and user maintenance shall be performed by an authorized service representative:

Z Do not immerse base in water or try to disassemble. Z Do not put the appliance or any individual parts in the dishwasher. Z Check voltage to be sure that the voltage indicated on the name

plate complies with your voltage. The name plate is located on the underside of the appliance.

Z Never use warm or hot water to fill the water container. Use cold

water only.

Z Keep your hands and the cord away from hot parts of the appli-

ance during operation.

Z Never clean with scouring powders or hard implements. Z Ensure that the ventilation slots are not covered. Z Never pull out the drip tray during the brewing process. Only pull

the drip tray when the display instructs you or when the appliance is ready for use.

Z Never fill instant coffee, chocolate mix etc. into the bean container

or ground coffee funnel (filler funnel for ground coffee). It will damage the functioning of the brewing chamber.

Z Never fill sugar coated coffee beans into the bean container. In

case of doubt, call your dealer.

Z Never fill anything other than coffee beans into the bean con-

tainer (no chocolate, no rice, no nuts, no spices, nothing other than roasted coffee beans).

Z Never fill frozen beans into the bean container. If you store beans

in the freezer, let them thaw 3 to 4 hours before filling them into the bean container.

Z Never fill anything but fresh, cold and clean water into the water

tank, except when decalcifying.

Z Never use mineral or carbonated water. You can use tap water,

bottled water, spring water and reverse osmosis water.

Z Never do anything with the machine which is not described in

these instructions. In case of doubt, call your dealer.

Page 7

– intentionally blank –

Page 8

Control elements

micro 9

J HOT

1 Water tank 2 Power cord (back of the machine) 3 Milk pipe 4 Coffee grounds container 5 Drip tray

Figure: Your machine may look different to the one shown.

6 Bean container with aroma preservation

cover 7 Hot-water spout 8 Height-adjustable dual spout 9 Cup platform

Page 9

Control elements

1 Cover for powder chute for ground coffee 2 Powder chute for ground coffee 3 Display 4 c Maintenance button 5 / Cappuccino button 6 ( Latte Macchiato button 7 Rotary Switch status display

8 Cover cap for grinder adjustment switch 9 Grinder adjustment switch 10 g Rotary Switch 11 m Hot Water button 12 < Espresso button 13 Q On/Off button 14 > Coffee button

13 14

Page 10

1 Preparing and using for the first time

1 Preparing and using for the

first time

This chapter provides you with the information you need to use your ENA without any problems. You will prepare your ENA step-by-step to enjoy your first perfect cup of coffee.

JURA on the Internet

Visit us on the Internet.

On the JURA website (www.jura.com) you will find interesting and up-to-date information on your ENA and on every aspect of coffee.

3-color plain text display

Your ENA features a 3-color plain text display. The colours of the display texts have the following meanings:

Green: The ENA is ready for use.

Red: The ENA is prompting you to perform

some action. Yellow: You are in programming mode.

Setting up the machine

When setting up your ENA, please note the following:

Place the machine on a horizontal surface that

is not sensitive to water. Choose a spot for your ENA which protects the

machine against overheating. Ensure that the ventilation slots are not covered.

Filling the bean container

NOTICE

Coffee beans which have been treated with additives (e.g. sugar), ground coffee or freeze-dried coffee will damage the grinder.

T Only use roasted, untreated coffee beans to

fill the bean container.

T Remove the aroma preservation cover of the

bean container.

T Remove any dirt or foreign objects from

inside the bean container.

T Fill the bean container with coffee beans. T Close the bean container.

First-time use

When using the machine for the first time, you can choose whether you want to operate the ENA with or without the CLEARYL Blue filter cartridge. If the water hardness is 10 °dH or more, we recommend using the filter cartridge. If you do not know the hardness of your water, you can find this out first (see Chapter 1 ‘Preparing and using for the first time – Determining the water hardness’).

E The On/Off button also acts as a power

switch. When the ENA is switched off, the machine does not consume standby energy.

J WARNING

If the machine is operated with a defective power cord, there is a danger of potentially fatal electric shock.

T Never use a machine which is damaged. T Never use a machine which has a defective

power cord.

E The water volume is given as standard in

OZ. You can change this setting to ML in

programming mode (see Chapter 4 ‘Permanent settings in programming mode – Unit for amount of water’).

Page 11

1 Preparing and using for the first time

Precondition: Bean container is filled.

T Insert the power plug into a power socket.

Q T Press the On/Off button to switch the

machine on.

LANGUAGE ENGLISH

E You can select another language by turning

the Rotary Switch.

k T Press the Rotary Switch to confirm the

language setting.

OK, the language is set. FILTERp / YESp

E Now decide whether you want to operate

your ENA with or without a CLEARYL Blue filter cartridge.

First-time use with filter cartridge activation

k T Press the Rotary Switch.

OK INSERT FILTER

T Remove the water tank. T Open the filter holder. T Insert the filter cartridge into the water tank,

exerting slight pressure.

T Close the filter holder. It will click into place

audibly.

E After two months, the filter will cease to

work. Set the date on the date plate on the filter holder in the water tank.

T Fill the water tank with fresh, cold water and

reinsert it.

T Place a receptacle (at least 17 oz or 500 ml)

under the hot-water and dual spout.

micro 9

k T Press the Rotary Switch.

FILTER RINSING, water flows out of

the hot-water spout.

E You can interrupt rinsing of the filter at any

time by pressing any button. Press the Maintenance button c, to continue with rinsing of the filter.

E The water may be slightly discolored. This is

not harmful to health and does not affect the taste.

Rinsing of the filter stops automatically.

SYSTEM FILLING, water flows out of

the dual spout.

HEATING RINSING, the system rinses itself. The

operation stops automatically.

READY

Page 12

1 Preparing and using for the first time

First-time use without filter cartridge activation

g T Turn the Rotary Switch until

FILTER- / NO- is displayed.

k T Press the Rotary Switch.

OK 16°dH

g T Turn the Rotary Switch to change the water

hardness setting, e.g. to

k T Press the Rotary Switch.

25°dH.

OK FILL WATER TANK

T Remove the water tank.

T Fill the water tank with fresh, cold water and

reinsert it.

PRESS RINSE

T Place a receptacle under the dual spout.

c T Press the Maintenance button.

SYSTEM FILLING, the system fills up

with water.

HEATING RINSING, the system rinses itself. The

operation stops automatically.

READY

Page 13

Determining the water hardness

The harder the water is, the more frequently the ENA needs to be descaled. It is therefore important to adjust the water hardness.

The water hardness can be adjusted on a continuous scale between 1 °dH and 30 °dH.

1 Preparing and using for the first time

Level Display German

Degree (°dH)

Not active – – – –

Very soft water <3 <3 < 53.4 None

Soft water > 4 > 4 > 71 1

Hard water > 8.4 > 8.4 > 150 2

Very hard water > 14 > 14 > 250 3

You can find out what the water hardness is by using the Aquadur® test strip supplied as standard.

T Hold the test strip briefly (for one second)

under running water.

T Shake off the water. T Wait for about one minute. T You will then be able to read the degree of

water hardness from the discoloration of the Aquadur® test strip and the description on the packaging.

Degrees of general hardness (°dGH)

Parts per million (ppm)

Indicator Strip number of ‘reddish’ fields

The water hardness can now be adjusted.

Page 14

2 Preparation

Adjusting the grinder

You can adjust the grinder on a continuous scale to suit the degree of roast of your coffee.

NOTICE

If you adjust the consistency of grind when the grinder is not operating, the grinding wheel could be damaged.

T Only adjust the consistency of grind when

the grinder is running.

The consistency of grind setting is correct if the coffee flows regularly from the dual spout. In addition a fine, thick crema forms.

Example: Change the consistency of grind during the preparation of an espresso.

T Place a cup under the dual spout. T Open the cover cap of the grinder adjustment

switch.

< T Press the Espresso button to start

preparation.

T Turn the grinder adjustment switch to the

desired position while the grinder is running. The preset amount of water flows into the cup. Preparation stops automatically.

READY

Filling the water tank

Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily.

NOTICE

Milk, sparkling mineral water or other liquids can damage the water tank or the machine.

T Only fill the water tank with fresh, cold water.

T Remove the water tank and rinse with cold

wate r.

T Fill the water tank with fresh, cold water and

reinsert it.

2 Preparation

J WARNING

Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn.

T Use extreme care when handling hot liquid

or steam.

T Allow liquid to cool down before drinking. T In the event of scalding, rinse affected area

with cold water and seek medical attention.

T Keep children AWAY.

For a summary of the different temperatures, please refer to Chap ter 4 ‘Permanent settings in programming mode – Products’.

E You can interrupt preparation at any time

while a specialty coffee, specialty coffee with milk or hot water is being prepared. Just press any button.

E Before and during the grinding operation

you can select the coffee strength of espresso <, coffee >, cappuccino / and latte macchiato ( :

NORMAL, STRONG.

Page 15

2 Preparation

E During preparation, you can change the

preset amounts (e.g. amount of milk foam or water) by turning the Rotary Switch g.

E You can follow the current status of

preparation on the progress bar.

E The water volume is given as standard in

OZ. You can change this setting to ML in

programming mode (see Chapter 4 ‘Permanent settings in programming mode – Unit for amount of water’).

Coffee tastes best served hot. A cold porcelain cup cools the beverage – and impairs the taste. We therefore recommend prewarming the cups. The full coffee aroma can develop only in prewarmed cups. You can purchase a JURA cup warmer from your specialised dealer.

You can make permanent settings for all products in programming mode (see Chapter 4 ‘Permanent settings in programming mode – Products’).

Espresso, coffee

Preparation of espresso < and coffee > follows this model.

Example: Proceed as follows to prepare one coffee. Precondition:

T Place a cup under the dual spout.

> T Press the Coffee button to start preparation.

READY is displayed.

COFFEE, the preset amount of water

flows into the cup. Preparation stops automatically.

READY

T Place a glass under the dual spout. T Remove the protective cover of the dual

spout.

T Connect the milk pipe to the dual spout.

micro 9

T Immerse the other end of the milk pipe in a

receptacle with milk (figure: optional JURA

0.4 liter (14 oz) stainless steel vacuum milk container).

micro 9

E Ensure that the filling height of the milk is

no higher than the milk pipe connection on the dual spout.

( T Press the Latte Macchiato button.

LATTE MAC., the milk foam is prepared.

Preparation stops automatically when the preset amount of milk is reached.

PAUSE

Latte macchiato, cappuccino

Your ENA can prepare a latte macchiato or cappuccino at the touch of a button. There is no need to move the glass or cup.

Preparation of latte macchiato ( and cappuccino / follows this model.

Example: Proceed as follows to prepare one latte macchiato.

Precondition:

READY is displayed.

E There is a short interval while the hot milk

separates from the milk foam. This allows the typical layers of a latte macchiato to form. You can choose the length of this interval in programming mode (see Chapter 4 ‘Permanent settings in programming mode – Products’).

LATTE MAC., coffee preparation starts.

The preset amount of water flows into the glass.

Page 16

2 Preparation

Preparation stops automatically.

READY

Permanently setting the amount of water for the cup size

It is easy to make permanent settings for the amount of water for all specialty coffees and hot water according to the cup size. Adjust the amount once as shown in the following example. Every time you prepare a drink in the future, this amount of water will be dispensed.

Example: Permanently adjust the amount of water for one coffee to the cup size.

Precondition:

connected to the dual spout.

T Place a cup under the dual spout.

/ T Press and hold the Cappuccino button.

READY is displayed. Milk is

CAPPUCCINO

/ T Continue to hold the Cappuccino button

down until

/ T Release the Cappuccino button.

The milk foam is prepared.

T Press any button as soon as there is

sufficient milk foam in the cup.

ENOUGH MILK? appears.

OK ENOUGH COFFEE?, the coffee flows

into the cup.

T Press any button as soon as there is

sufficient coffee in the cup.

OK, CAPPUCCINO, the set amounts for

one cappuccino are permanently stored.

READY

E Use ground coffee which is not ground too

finely. Very fine coffee can block up the system so that the coffee only comes out in drips.

E If you did not fill the machine with a

sufficient amount of ground coffee,

NOT

ENOUGH POWDER is displayed and the

ENA stops the operation.

E The desired specialty coffee must be

prepared within approximately one minute after filling with the ground coffee. Otherwise the ENA stops the operation and is once more ready for use.

The preparation of coffee, espresso, cappuccino and latte macchiato with ground coffee follows this model.

Example: Prepare a cup of coffee using ground coffee.

Precondition:

T Place a cup under the dual spout. T Open the powder chute for ground coffee.

READY is displayed.

FILL POWDER

T Place the filler funnel for ground coffee on

the powder chute.

E You can alter this setting at any time by

repeating the above procedure.

Ground coffee

You can choose to use a second coffee variety, for example decaffeinated coffee, with the powder chute for ground coffee.

E Never add more than one level measuring

spoon of ground coffee.

T Place one level measuring spoon of ground

coffee into the filler funnel.

T Close the powder chute for ground coffee.

SELECT BUTTON

> T Press the Coffee button to start preparation.

COFFEE, the preset amount of water

flows into the cup. Preparation stops automatically.

READY

Page 17

3 Daily operation

Hot water

CAUTION

There is a danger of scalding from hot water splashes.

T Avoid direct contact with the skin.

Precondition:

T Place a cup under the hot-water spout.

m T Press the Hot Water button.

READY is displayed.

WATER, the preset amount of water flows

into the cup. Preparation stops automatically.

READY

3 Daily operation

Switching on the machine

Daily maintenance of the machine and hygiene when handling milk, coffee and water are key to a perfect coffee result in the cup every time. You should therefore change the water daily.

T Place a receptacle under the dual spout.

Q T Press the On/Off button to switch the

machine on.

HEATING RINSING, the system rinses itself.

The operation stops automatically.

READY

T Dismantle and rinse the dual spout (see

Chapter 5 ‘Maintenance – Dismantling and rinsing the dual spout’).

T Wipe the surface of the machine with a

clean, soft, damp cloth (e.g. microfiber cloth).

E In the interests of hygiene, we recommend

changing the milk pipe on a regular basis (approx. every 3 months). Replacement pipes are available from specialised dealers.

Switching off the machine

When the ENA is switched off, the system is automatically rinsed if a specialty coffee has been prepared. If cappuccino or latte macchiato has been prepared, cappuccino frother rinsing also takes place.

T Place a receptacle under the dual spout.

Q T Press the On/Off button.

RINSING, CAPPUCCINO RINSING, the system rinses itself. The

operation stops automatically. Your ENA is switched off.

E When the ENA is switched off with the

On/Off button, the machine does not

consume standby energy.

Daily maintenance

To ensure that you get many years of reliable service out of your ENA and to guarantee the optimum coffee quality, the machine requires daily maintenance.

T Remove the drip tray. T Empty the coffee grounds container and

drip tray and rinse with warm water.

T Reinsert the coffee grounds container and

the drip tray.

T Rinse the water tank with clean water.

Page 18

4 Permanent settings in programming mode

4 Permanent settings in

programming mode

Products

J WARNING

Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn.

T Use extreme care when handling hot liquid

or steam.

T Allow liquid to cool down before drinking. T In the event of scalding, rinse affected area

with cold water and seek medical attention.

T Keep children AWAY.

You can make the following permanent settings for espresso and coffee:

Amount of water: 0.5OZ – 8.0OZ

(25 ml – 240ml) (per cup) Coffee strength: NORMAL, STRONG

Temperature: NORMAL, HIGH

You can make the following permanent settings for latte macchiato and cappuccino:

Amount of milk foam: 3SEC – 120SEC

Interval: 0SEC – 60SEC

Coffee strength: NORMAL, STRONG

Amount of water: 0.5OZ – 8.0OZ

(25 ml – 240ml) Temperature: NORMAL, HIGH

You can make the following permanent setting for

hot water:

Amount of water: 0.5OZ – 15.0OZ

(25 ml – 450 ml)

Permanent settings in programming mode always follow the same model.

Example: Permanently change the coffee strength (

FLAVOUR) for espresso from STRONG to

NORMAL.

Precondition: k T Press and hold the Rotary Switch until

READY is displayed.

RINSE appears.

g T Turn the Rotary Switch until

displayed.

k T Press the Rotary Switch to enter the

program item.

PRODUCT is

SELECT BUTTON

E Next select the button of the product for

which you would like to make settings. No product is prepared at this point.

< T Press the Espresso button.

ESPRESSO WATER

g T Turn the Rotary Switch until FLAVOUR is

displayed.

k T Press the Rotary Switch to enter the

program item.

STRONG

g T Turn the Rotary Switch until NORMAL is

displayed.

k T Press the Rotary Switch to confirm the

setting.

OK, the coffee strength is set. FLAVOUR

g T Turn the Rotary Switch until EXIT is

displayed.

k T Press the Rotary Switch to exit the program

item.

PRODUCT

g T Turn the Rotary Switch until EXIT is

displayed.

k T Press the Rotary Switch to exit programming

mode.

READY

Setting the water hardness

E If you are using the CLEARYL Blue filter

cartridge and have activated it in programming mode, you will not be able to adjust the water hardness.

The harder the water is, the more frequently the ENA needs to be descaled. It is therefore important to adjust the water hardness.

The water hardness can be adjusted on a continuous scale between 1 °dH and 30 °dH.

Page 19

4 Permanent settings in programming mode

Example: Change the water hardness setting from

16°dH to 25°dH.

Precondition: k T Press and hold the Rotary Switch until

READY is displayed.

RINSE appears.

g T Turn the Rotary Switch until

is displayed.

k T Press the Rotary Switch to enter the

program item.

HARDNESS

16°dH

g T Turn the Rotary Switch until 25°dH is

displayed.

k T Press the Rotary Switch to confirm the

setting.

OK, the water hardness is set. HARDNESS

g T Turn the Rotary Switch until EXIT is

displayed.

k T Press the Rotary Switch to exit programming

mode.

READY

Energy-saving mode

The energy-saving mode (Energy Save Mode,

E.S.M.

) helps you to prevent your machine from consuming power unnecessarily and to actively save energy:

ENERGYp

Soon after the last preparation, the ENA

stops heating up. After about 5 minutes the message Before you can prepare a specialty coffee,

specialty coffee with milk, or hot water, the machine must heat up.

ENERGY-

The ENA is constantly ready for use.

All specialty coffees as well as hot water can

be prepared without having to wait.

Example: Change the energy-saving mode from

ENERGY ON is displayed.

ENERGYp to ENERGY-.

Precondition: k T Press and hold the Rotary Switch until

READY is displayed.

RINSE appears.

g T Turn the Rotary Switch until

displayed.

k T Press the Rotary Switch to enter the

program item.

ENERGYp is

ECONOMYp

g T Turn the Rotary Switch until ECONOMY-

is displayed.

k T Press the Rotary Switch to confirm the

setting.

OK, the energy-saving mode is set. ENERGY-

g T Turn the Rotary Switch until EXIT is

displayed.

k T Press the Rotary Switch to exit programming

mode.

READY

Automatic switch-off

By instructing your ENA to automatically switch itself off, you can cut down your energy consumption. If this function is activated, your ENA switches off automatically after the preset time following the last action on the machine.

The automatic switch-off can be set to between 15 minutes and 9 hours.

Example: Change the switch-off time from

2HRS to 1HRS.

Precondition: k T Press and hold the Rotary Switch until

READY is displayed.

RINSE appears.

g T Turn the Rotary Switch until

is displayed.

k T Press the Rotary Switch to enter the

program item.

OFF AFTER

2HRS

g T Turn the Rotary Switch until 1HRS is

displayed.

k T Press the Rotary Switch to confirm the

setting.

OK, the switch-off time is set. OFF AFTER

g T Turn the Rotary Switch until EXIT is

displayed.

Page 20

4 Permanent settings in programming mode

k T Press the Rotary Switch to exit programming

mode.

READY

Rinses

In the program item RINSES you can make the following settings:

INIT RINSE MANUAL

The switch-on rinse must be started

manually.

INIT RINSE AUTOMATIC

The switch-on rinse is started automatically.

C-RINSE AFTER10'

You are prompted to perform a cappuccino

rinse 10 minutes after preparation of a specialty coffee with milk.

C-RINSE NOW

You are prompted to perform a cappuccino

rinse immediately after preparation of a specialty coffee with milk.

Example: Change the setting such that cappuccino frother rinsing is performed immediately after preparation of a specialty coffee with milk.

Precondition: k T Press and hold the Rotary Switch until

READY is displayed.

RINSE appears.

g T Turn the Rotary Switch until

displayed.

k T Press the Rotary Switch to enter the

program item.

RINSES is

INIT RINSE

g T Turn the Rotary Switch until C-RINSE is

displayed.

k T Press the Rotary Switch to enter the

program item.

AFTER10'

g T Turn the Rotary Switch until NOW is

displayed.

k T Press the Rotary Switch to confirm the

setting.

OK C-RINSE

g T Turn the Rotary Switch until EXIT is

displayed.

k T Press the Rotary Switch to exit the program

item.

RINSES

g T Turn the Rotary Switch until EXIT is

displayed.

k T Press the Rotary Switch to exit programming

mode.

READY

Unit for amount of water

The water volume is given as standard in OZ. You can change this setting to mode.

Example: Change the unit for the amount of water from

OZ to ML.

Precondition: k T Press and hold the Rotary Switch until

READY is displayed.

ML in programming

RINSE appears.

g T Turn the Rotary Switch until

displayed.

k T Press the Rotary Switch to enter the

program item.

DISPLAY is

g T Turn the Rotary Switch until ML is displayed. k T Press the Rotary Switch to confirm the

setting.

OK, the unit for the amount of water is set. DISPLAY

g T Turn the Rotary Switch until EXIT is

displayed.

k T Press the Rotary Switch to exit programming

mode.

READY

Page 21

5 Maintenance

Language

In this program item you can set the language used by your ENA.

Example: Change the language from to

DEUTSCH.

Precondition: k T Press and hold the Rotary Switch until

READY is displayed.

ENGLISH

RINSE appears.

g T Turn the Rotary Switch until

is displayed.

k T Press the Rotary Switch to enter the

program item.

LANGUAGE

ENGLISH

g T Turn the Rotary Switch until DEUTSCH is

displayed.

k T Press the Rotary Switch to confirm the

setting.

OK, the language is set. SPRACHE

g T Turn the Rotary Switch until EXIT is

displayed.

k T Press the Rotary Switch to exit programming

mode.

BEREIT

Your ENA has the following integrated maintenance programs:

Cappuccino frother cleaning (C-CLEAN)

Rinsing the machine (RINSE)

Cappuccino frother rinsing (C-RINSE)

Cleaning the machine (CLEAN)

Changing the filter (FILTER)

Descaling the machine (DE-SCALE)

E You can start the maintenance programs at

any time in programming mode (program item

RINSE). If no action is taken in this

program item, programming mode is exited automatically after approximately 5 seconds.

Rinsing the machine

You can initiate the rinse operation manually at any time.

Precondition:

T Place a receptacle under the dual spout.

READY is displayed.

micro 9

5 Maintenance

J WARNING

Use of maintenance products that are harmful to health and discharge of liquids during maintenance program. Harmful if swallowed. Irritating to eyes and skin.

T Keep children AWAY. T Keep children away from the machine while

it is performing a maintenance program.

T Avoid contact with skin and eyes. T Avoid generation of dust. Do not inhale dust. T When using do not eat or drink. T Keep maintenance products away from food,

drink and animal food.

T Keep container tightly closed and dry. Keep

in a cool place.

k T Press and hold the Rotary Switch until

RINSE appears.

k T Press the Rotary Switch to enter the

program item.

C-CLEAN

g T Turn the Rotary Switch until RINSE is

displayed.

k T Press the Rotary Switch to initiate the rinse

operation.

RINSING, the system rinses itself.

The operation stops automatically.

READY

Page 22

5 Maintenance

Rinsing the milk system

After each milk preparation, the ENA prompts you to perform a cappuccino rinse.

Precondition:

CAPPUCCINO RINSE is

displayed.

T Place a receptacle under the dual spout.

micro 9

c T Press the Maintenance button to start

cappuccino frother rinsing.

CAPPUCCINO RINSING, the milk

system is rinsed. The rinse stops automatically.

READY

appears on the display.

Cleaning the milk system

The dual spout must be cleaned daily if milk has been prepared to make sure it functions perfectly and also in the interests of hygiene. Your ENA will not prompt you to clean the dual spout.

J WARNING

Non-recommended cleaning agents will not optimally remove milk residues. This may cause the cappuccino frother to become blocked and fly off the machine. Discharge of hot steam.

T Use only original JURA milk system cleaner.

J WARNING

Harmful and irritating cleaning agent. Harmful if swallowed. Irritating to eyes and skin.

T Keep children AWAY. T Avoid contact with skin and eyes. T After contact with skin, wash immediately

with plenty of water. In case of skin irritation, seek medical advice.

T After eye contact, immediately flush eyes

with plenty of water and seek medical advice.

T If swallowed, rinse mouth immediately and

drink large quantities of water. Do not induce vomiting. Seek medical advice immediately and show label.

E JURA milk system cleaner is available from

specialized dealers.

k T Press and hold the Rotary Switch until

RINSE appears.

k T Press the Rotary Switch to enter the

program item.

C-CLEAN

k T Press the Rotary Switch to start cappuccino

frother cleaning.

CLEANER FOR CAPPU.

T Remove the milk pipe from the receptacle

with milk.

T Pour 8.5 oz (250 ml) of fresh water into a

receptacle and add one capful of Milk system cleaner.

T Immerse the milk pipe in the receptacle. T Place another receptacle under the dual

spout.

micro 9

Page 23

5 Maintenance

c T Press the Maintenance button.

CLEANING, the milk system and the pipe

are cleaned. The operation is interrupted,

WATER FOR

CAPPUCCINO.

T Rinse the receptacle thoroughly, fill it with

8.5 oz (250 ml) of fresh water and immerse the milk pipe in it.

T Empty the receptacle under the dual spout

and place it back underneath.

c T Press the Maintenance button.

CLEANING, the milk system and the pipe

are rinsed with fresh water. The operation stops automatically.

READY

Dismantling and rinsing the dual spout

The dual spout must be dismantled and rinsed daily if milk has been prepared to make sure it functions perfectly and also in the interests of hygiene. Your ENA will not prompt you to clean the dual spout.

T Remove the milk pipe and rinse thoroughly

under running water.

T Press the releasing devices and pull the dual

spout down and off.

T Dismantle the milk system into its individual

parts.

T Rinse all parts under running water. If there

are severely dried-on milk residues, firstly immerse the individual parts in a solution of 250 ml cold water and one capful of JURA milk system cleaner. Then rinse the parts thoroughly

T Fit the air intake pipe.

T Reassemble the milk system, noting the

numbering on the parts.

T Push the milk system down and remove it.

T Insert the assembled individual parts into

the dual spout and press them together.

Page 24

5 Maintenance

T Fit the dual spout on the machine. It will

click into place audibly.

Inserting and activating the filter

Your ENA no longer has to be descaled if you are using the CLEARYL Blue filter cartridge. If you did not activate the filter cartridge the first time you used the machine, you can do this now as follows.

E Perform the ‘inserting the filter’ operation

without any interruptions. This will ensure that your ENA always produces its best.

Precondition: k T Press and hold the Rotary Switch until

READY is displayed.

RINSE appears.

g T Turn the Rotary Switch until

displayed.

k T Press the Rotary Switch to enter the

program item.

FILTER- is

NO-

g T Turn the Rotary Switch until YESp is

displayed.

k T Press the Rotary Switch to confirm the

setting.

OK INSERT FILTER

T Remove and empty the water tank. T Open the filter holder.

T Insert the filter cartridge into the water tank,

exerting slight pressure.

T Close the filter holder. It will click into place

audibly.

E After two months, the filter will cease to

work. Set the date on the date plate on the filter holder in the water tank.

T Fill the water tank with fresh, cold water and

reinsert it.

T Place a receptacle (at least 17 oz or 500 ml)

under the hot-water spout.

c T Press the Maintenance button.

FILTER RINSING, water flows out of

the hot-water spout.

E You can interrupt rinsing of the filter at any

time by pressing any button. Press the Maintenance button c, to continue with rinsing of the filter.

E The water may be slightly discolored. This is

not harmful to health and does not affect the taste.

Rinsing of the filter stops automatically.

HEATING READY

The filter is now activated.

Changing the filter

E After 2000 oz (60 liters) of water have flowed

through, the filter will cease to work. Your ENA will automatically prompt you to change the filter.

Page 25

5 Maintenance

E After two months, the filter will cease to

work. Set the date on the date plate on the filter holder in the water tank.

E If the CLEARYL Blue filter cartridge is not

activated in programming mode, you will not be prompted to change the filter.

Precondition:

c T Press the Maintenance button.

FILTER / READY is displayed.

INSERT FILTER

T Remove and empty the water tank. T Open the filter holder and remove the old fil-

ter cartridge.

T Insert a new filter cartridge into the water

tank, exerting slight pressure.

T Close the filter holder. It will click into place

audibly.

T Fill the water tank with fresh, cold water and

reinsert it.

T Place a receptacle (at least 17 oz or 500 ml)

under the hot-water spout.

k T Press the Rotary Switch.

FILTER RINSING, water flows out of

the hot-water spout.

E You can interrupt rinsing of the filter at any

time by pressing any button. Press the Maintenance button c, to continue with rinsing of the filter.

E The water may be slightly discolored. This is

not harmful to health and does not affect the taste.

Rinsing of the filter stops automatically.

HEATING READY

Cleaning the machine

After 180 preparations or 80 switch-on rinses, the ENA will prompt you to clean it.

J WARNING

Non-recommended (e.g. liquid) cleaning agents may contain substances that could damage the machine or leave residues.

T Use only original JURA cleaning tablets.

These are specially formulated for your machine.

J WARNING

Harmful and irritating cleaning agent. Harmful if swallowed. Irritating to eyes and skin.

T Keep children AWAY. T Avoid contact with skin and eyes. T Avoid generation of dust. Do not inhale dust. T After contact with skin, wash immediately

with plenty of water. In case of skin irritation, seek medical advice.

T After eye contact, immediately flush eyes

with plenty of water and seek medical advice.

T If swallowed, rinse mouth immediately and

drink large quantities of water. Do not induce vomiting. Seek medical advice immediately and show label.

E The cleaning program lasts approximately

15 minutes.

E Do not interrupt the cleaning program. The

quality of cleaning will be impaired if you do so.

E JURA cleaning tablets are available from

specialized dealers.

Precondition:

c T Press the Maintenance button.

CLEAN / READY is displayed.

EMPTY TRAY

T Empty the drip tray and coffee grounds

container and reinsert them.

PRESS RINSE

T Place a receptacle under the dual spout.

Page 26

5 Maintenance

c T Press the Maintenance button.

CLEANING, water flows out of the dual

spout. The operation is interrupted,

ADD

TABLET.

T Open the powder chute for ground coffee

and drop in a JURA cleaning tablet.

T Close the powder chute for ground coffee.

PRESS RINSE

c T Press the Maintenance button.

CLEANING, water flows out of the dual

spout repeatedly.

EMPTY TRAY

T Empty the drip tray and coffee grounds

container and reinsert them.

HEATING READY

Descaling the machine

The ENA builds up deposits of limescale over time and automatically prompts you to descale it when necessary. The degree of calcification depends on the hardness of your water.

J WARNING

Non-recommended descaling agents (e.g. vinegar) may contain substances that could damage the machine or leave residues.

T Use only original JURA descaling tablets.

These are specially formulated for your machine.

J WARNING

Harmful and irritating descaling agent. Harmful if swallowed. Irritating to eyes and skin.

T Keep children AWAY. T Avoid contact with skin and eyes. T Avoid generation of dust. Do not inhale dust. T After contact with skin, wash immediately

with plenty of water. In case of skin irritation, seek medical advice.

T After eye contact, immediately flush eyes

with plenty of water. Remove contact lenses. Seek medical advice.

T If swallowed, rinse mouth immediately and

drink large quantities of water. Do not induce vomiting. Seek medical advice immediately and show label.

NOTICE

If the descaling operation is interrupted, there may be damage to the machine.

T Allow the descaling program to run to the

end.

E The descaling program lasts approximately

40 minutes.

E JURA descaling tablets are available from

specialized dealers.

E If you use a CLEARYL Blue filter cartridge and

this is activated, you will not be prompted to descale.

E If the descaling agent comes into contact

with sensitive surfaces (e.g. marble), damage cannot be ruled out. Clean up any splashes immediately.

Precondition:

displayed. c T Press the Maintenance button.

DE-SCALE / READY is

EMPTY TRAY

T Empty the drip tray and coffee grounds

container and reinsert them.

AGENT IN TANK

T Remove and empty the water tank.

Page 27

5 Maintenance

T Completely dissolve the contents of one

blister (three JURA descaling tablets) in a receptacle holding 17 oz (500 ml) of water. This may take several minutes.

T Pour the solution into the empty water tank

and reinsert the tank.

PRESS RINSE

T Place a receptacle under the hot-water

spout.

c T Press the Maintenance button.

DE-SCALING, water flows out of the

hot-water spout repeatedly.

EMPTY TRAY

T Empty the drip tray and coffee grounds

container and reinsert them.

FILL WATER TANK

T Empty the receptacle and place it under the

dual and hot-water spout.

T Remove the water tank, rinse thoroughly,

fill with fresh, cold water and reinsert.

PRESS RINSE

c T Press the Maintenance button.

DE-SCALING, water flows out of the

dual and hot-water spout. The operation is interrupted,

EMPTY

TRAY.

T Empty the drip tray and coffee grounds

container and reinsert them.

READY

Descaling the water tank

Limescale deposits may form in the water tank. To ensure correct function of the machine, descale the water tank from time to time.

T Remove the water tank. T If you use a CLEARYL Blue filter cartridge,

remove it.

T Descale the tank with a mild conventional

descaling agent in accordance with the manufacturer's instructions.

T Rinse the water tank thoroughly. T If you use a CLEARYL Blue filter cartridge,

reinsert it.

T Fill the water tank with fresh, cold water and

reinsert it.

Cleaning the bean container

Coffee beans may be covered with a slight oil film which remains on the walls of the bean container. These traces may negatively affect the coffee result. For this reason clean the bean container from time to time. Q T Press the On/Off button to switch the

machine off.

T Disconnect the power plug. T Remove the bean container cover. T Remove the coffee beans with a vacuum

cleaner.

T Clean the bean container with a soft, dry

cloth.

T Fill the bean container with fresh coffee

beans, then close the bean container cover.

E If the descaling operation stops unexpect-

edly, rinse the water tank thoroughly.

Page 28

6 Display messages

Message Cause/Result Action

FILL WATER TANK

EMPTY GROUNDS

TRAY MISSING

FILL BEANS

CLOSE COVER

PRESS RINSE

CAPPUCCINO RINSE

READY / CLEAN

READY / DE-SCALE

READY / FILTER

NOT ENOUGH POWDER

TOO HOT

The water tank is empty or not correctly inserted. You cannot prepare any products.

The coffee grounds container is full. No specialty coffees can be prepared, but hot water preparation is possible.

The drip tray is not inserted correctly or is not inserted at all. You cannot prepare any products.

The bean container is empty. No specialty coffees can be prepared, but hot water preparation is possible.

The aroma preservation cover for the bean container is not fitted or not fitted correctly.

The ENA is prompting you to perform a rinse or continue a maintenance program that was already started.

The ENA requests a cappuccino rinse.

The ENA is prompting you to clean it.

The ENA is prompting you to descale it.

After 2000 oz (60 liters) of water have flowed through the CLEARYL Blue filter cartridge, it will cease to work.

There is insufficient ground coffee in the machine; the ENA stops the operation.

The system is too hot to start a maintenance program.

T Fill the water tank (see Chapter 1 ‘Preparing and using for the first time – Filling the water tank’).

T Insert the water tank. T Empty the coffee grounds container and the

drip tray (see Chapter 3 ‘Daily operation – Daily maintenance’).

T Insert the drip tray.

T Fill the bean container (see Chapter 1 ‘Preparing

and using for the first time – Filling the bean container’).

T Fit the aroma preservation cover correctly.

T Press the Maintenance button to start the rinse

or to continue the maintenance program.

T Press the Maintenance button to start cappuccino frother rinsing.

T Perform cleaning (see Chapter 5 ‘Maintenance – Cleaning the machine’).

T Perform descaling (see Chapter 5 ‘Maintenance – Descaling the machine ’).

T Replace the CLEARYL Blue filter cartridge (see Chapter 5 ‘Maintenance – Changing the filter’).

T The next time you prepare a beverage, add more ground coffee (see Chapter 2 ‘Preparation – Ground coffee’).

T Wait for several minutes until the system has cooled or prepare a specialty coffee or hot water.

Page 29

7 Troubleshooting

Problem Cause/Result Action

Insufficient foam is produced when the milk is frothed or milk sprays from the dual spout.

Coffee only comes out in drips when it is being prepared.

Water hardness cannot be adjusted.

FILL WATER TANK

is displayed although the water tank is full.

Grinder is making a very loud noise.

ERROR2 is displayed. If the machine was

Other

ERROR messages

are displayed.

The dual spout is dirty.

Coffee or ground coffee has been ground too finely and is blocking the system.

The CLEARYL Blue filter cartridge is activated.

The water tank float is trapped.

There are foreign objects in the grinder.

exposed to the cold for a long period of time, heating is disabled for safety reasons.

–

T Clean the dual spout (see Chapter 5 ‘Maintenance – Cleaning the milk system’). T Dismantle and rinse the dual spout (see Chapter 5 ‘Maintenance – Dismantling and rinsing the dual spout’).

T Set the grinder to a coarser setting or use coarser ground coffee (see Chapter 1 ‘Preparing and using for the first time – Adjusting the grinder’).

T Deactivate the CLEARYL Blue filter cartridge in programming mode.

T Descale the water tank (see Chapter 5 ‘Maintenance – Descaling the water tank’).

T Contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal information’).

T Warm the machine at room temperature.

T Switch off the ENA with the On/Off button.

Contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal information’).

E If you were unable to solve the problem,

contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal information’).

Page 30

8 Transport and environmentally friendly disposal

8 Transport and environmentally

friendly disposal

Transport / Emptying the system

Keep the packaging for your ENA. It should be used to protect the machine during transport.

In order to protect the ENA from frost during transport, the system must be emptied.

Precondition:

T Place a receptacle under the hot-water

m T Press the Hot Water button.

T Remove and empty the water tank.

Q T Press the On/Off button to switch the

Disposal

Please dispose of old machines in an environmentally neutral way.

READY is displayed.

spout.

micro 9

WATER, hot water flows out of the

hot-water spout.

Hot water will continue to flow until the system is empty.

FILL WATER TANK

machine off.

9 Technical data

Voltage 120 V ~, 60 Hz

Power 1450 W

Conformity mark

Energy consumption

ECONOMY-

Energy consumption

ECONOMYp

Pump pressure Static, max. 15 bar

Holding capacity of water tank (without filter)

Holding capacity of bean container

Holding capacity of coffee grounds container

Power cord length Approx. 43.3 in.

Weight Approx. 20.7 lb

Dimensions (W × H × D) 9.0 × 12.7 × 17.5 in.

Directives

The machine complies with the following directives:

Standard UL 1082

Canadian Standard CSA C22.2 No. 64

Approx. 10.6 Wh

Approx. 4.3 Wh

37.2 oz (1.1 l)

4.4 oz (125 g)

Approx. 10 servings

(1.1 m)

(Approx. 9.4 kg)

(23 × 32.3 × 44.5 cm)

Page 31

10 Index

Addresses 33 Aroma preservation cover

Bean container with aroma preservation cover 8

Automatic switch-off 19

Bean container

Bean container with aroma preservation cover 8 Cleaning 27 Filling 10

Bus bar

Technical data 30

Button

Cappuccino button 9 Coffee button 9 Espresso button 9 Hot Water button 9 Latte Macchiato button 9 Maintenance button 9 On/Off button 9

Cappuccino 15 Cappuccino frother cleaning

Cleaning the milk system 22

Cappuccino frother rinsing

Rinsing the milk system 22

Cleaning

Bean container 27 Machine 25

CLEARYL Blue filter cartridge

Changing 24

Inserting and activating the filter 24 Coffee 15 Coffee grounds container 8 Consistency of grind

Adjusting the grinder 14

Grinder adjustment switch 9 Contact details 33 Cup platform 8 Customer support 33

Descaling

Machine 26

Water tank 27 Display 9, 10 Display messages 28 Disposal 30 Drip tray 8 Dual spout

Dismantling and cleaning 23

Height-adjustable dual spout 8

Emptying the system 30 Energy-saving mode 19 Errors

Troubleshooting 29 Espresso 15

Filling

Bean container 10

Water tank 14 Filter

Changing 24

Inserting and activating the filter 24 First-time use 10

With filter cartridge activation 11

Without filter cartridge activation 12

Ground coffee 16

Powder chute for ground coffee 9

Hotline 33 Hot water 17 Hot-water spout 8

Important safeguards

Safety 4 Instant coffee

Ground coffee 16 Internet 10

Page 32

10 Index

JURA

Contact details 33 Internet 10

Language 21 Latte macchiato 15

Machine

Cleaning 25 Descaling 26 Rinsing 21 Setting up 10 Switching off 17

Switching on 17 Mains cord 8 Maintenance

Daily maintenance 17 Maintenance 21 Messages, display 28 Milk system

Cleaning 22

Rinsing 22

Permanently setting the water for the cup size 16 Permanent settings in programming mode 18 Powder chute

Powder chute for ground coffee 9 Preparation 14, 15

Cappuccino 15

Coffee 15

Espresso 15

Ground coffee 16

Hot water 17

Latte macchiato 15 Problems

Troubleshooting 29 Programming mode 18

Automatic switch-off 19

Energy-saving mode 19

Language 21

Products 18

Rinses 20

Setting the water hardness 18

Unit for amount of water 20

Rinses 20 Rinsing

Machine 21

Rotary Switch 9

Status display 9

Rotary Switch status display 9

Safety

Important safeguards 4

Settings

Permanent settings in programming mode 18

Setting up

Setting up the machine 10

Spout

Height-adjustable dual spout 8

Hot-water spout 8 Switching off 17 Switching on 17 Switch-off

Automatic switch-off 19 Symbol description 3

Technical data 30 Tel 33 Transport 30 Troubleshooting 29

Unit for amount of water 20 Use, First-time 10

Water hardness

Determining the water hardness 13

Setting the water hardness 18 Water tank 8

Descaling 27

Filling 14 Website 10

Page 33

11 JURA contact details / Legal information

11 JURA contact details / Legal

information

Headquarters

JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Switzerland

USA: JURA Inc. Canada: FAEMA

Customer Service

Phone E-Mail

Opening Hours (EST) Mon – Thu 9 am – 9 pm

Distributor Address

Phone Fax

Internet www.us.jura.com www.ca.jura.com

1-800-220-5701 info@us.jura.com

Fri 9 am – 8 pm Sat 9 am – 5 pm

20 Craig Road Montvale, NJ 07645 001 (201) 767-3999 001 (201) 767-9684

1-(855)-544-8600 info@juracanada.ca

115 Matheson Boulevard East Mississauga, Ontario, L4Z 1X8 1-(905)-501-8600

@ You will find additional contact details for

your country at www.jura.com.

Technical changes

We reserve the right to make technical changes. The diagrams used in these instructions for use are for illustration purposes only and do not represent the original colours of the machine. Some details of your ENA may vary.

Feedback

Your opinion is important to us! Use the contact link at www.jura.com.

The instructions for use contain information which is protected by copyright. It is not permitted to photocopy these instructions for use or translate them into another language without the prior written consent of JURA Elektroapparate AG.

Page 34

J70628/ENA Micro 9/US-en-pt/201512

– intentionally blank –

Jura ENA Micro 9 ONE Touch User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual