JURA ENA9 Operating Instructions
de
en
fr
it
nl
Instructions for Use ENA 9 One Touch
The Instructions for Use has been awarded the seal of
approval by the independent German Technical Inspection
Agency, TÜV SÜD, due to its easy-to-understand style, its
thoroughness and coverage of safety aspects.
es
pt
ru
Table of contents
Your ENA 9
Control elements 4
Important information 6
Proper use .................................................................................................................................................................6
For your safety .........................................................................................................................................................6
1 Preparing and using for the first time 7
JURA on the Internet ...............................................................................................................................................7
3-colour plain text display ......................................................................................................................................7
Setting up the machine ..........................................................................................................................................7
Filling the water tank ..............................................................................................................................................7
Filling the bean container ......................................................................................................................................7
First-time use ............................................................................................................................................................8
Inserting and activating the filter .........................................................................................................................8
Determining and adjusting the water hardness ................................................................................................9
Adjusting the grinder ............................................................................................................................................ 10
2 Preparation 10
Coffee ....................................................................................................................................................................... 10
Preparing two speciality coffees at the touch of a button .............................................................................. 11
Aroma Boost ............................................................................................................................................................ 11
Latte macchiato, cappuccino ................................................................................................................................ 11
Permanently setting the amount of water for the cup size ............................................................................11
Ground coffee ..........................................................................................................................................................12
Hot water..................................................................................................................................................................13
3 Daily operation 13
Switching on the machine ....................................................................................................................................13
Daily maintenance ..................................................................................................................................................13
Switching off the machine ....................................................................................................................................13
4 Permanent settings in programming mode 13
Products ...................................................................................................................................................................13
Energy-saving mode ............................................................................................................................................. 14
Automatic switch-off ..............................................................................................................................................15
Rinses ........................................................................................................................................................................15
Unit for amount of water ..................................................................................................................................... 16
Language ................................................................................................................................................................. 16
5 Maintenance 16
Rinsing the machine .............................................................................................................................................16
Rinsing the milk system ........................................................................................................................................17
Cleaning the milk system ......................................................................................................................................17
2
Table of contents
Dismantling and rinsing the dual spout ............................................................................................................ 18
Changing the filter................................................................................................................................................. 18
Cleaning the machine ........................................................................................................................................... 19
Descaling the machine ....................................................................................................................................... 20
Descaling the water tank ...................................................................................................................................... 21
Cleaning the bean container ...............................................................................................................................21
6 Display messages 22
7 Troubleshooting 23
8 Transport and environmentally friendly disposal 24
Transport / Emptying the system .......................................................................................................................24
Disposal ...................................................................................................................................................................24
9 Technical data 24
10 Index 25
11 JURA contact details / Legal information 27
de
en
fr
it
nl
Symbol description
Warnings
J WARNING
J CAUTION
CAUTION CAUTION draws your attention to potential damage to the machine.
Symbols used
T Prompt to take action. This symbol means that you are being prompted to perform some
E Information and tips to make it even easier to use your ENA.
@ References to the JURA website, which provides further information that may be of interest
READY
Always take note of any information marked with the words CAUTION or WARNING
and a warning sign. The signal word WARNING draws your attention to potential
serious injury, and the signal word CAUTION to potential minor injury.
action.
to you: www.jura.com
Display
es
pt
ru
3
Control elements
Control elements
1 Water tank
2 Powder chute for ground coffee
3 Mains cable (back of the machine)
4 Milk pipe
5 Coffee grounds container
6 Drip tray
7 Cup platform
8 Bean container cover
9 l Switch for hot water preparation
10 Hot-water nozzle
11 Height-adjustable dual spout
4
de
Control elements
en
fr
1 Cover
2 c Maintenance button
3 / Cappuccino button
4 ( Latte Macchiato button
5 Q On/Off button
6 Grinding wheel
7 ) Aroma Boost button
8 > Coffee button
9 g Rotary Switch
10 Display
it
nl
es
pt
ru
5
Important information
Important information
Proper use
The machine is designed and intended for private
domestic use. It should only be used for coffee
preparation and to heat milk and water. Use for
any other purpose will be deemed improper.
JURA Elektroapparate AG cannot accept any
responsibility for the consequences of improper
use.
Before using the machine read these instructions
for use thoroughly and completely and comply
with the instructions they contain. A warranty
service is not applicable for damage or defects
caused by non-compliance with the instructions
for use. Keep these instructions for use close to the
machine and pass them on to the next user.
For your safety
Please carefully read and observe the important
safety information set out below.
To avoid danger of potentially fatal electric shock:
Never use a machine which is damaged or has
U
a defective mains cable.
In the event of signs of damage, for example if
U
there is a smell of burning, unplug the
machine immediately from the mains supply
and contact JURA service.
If the mains cable of this machine is damaged,
U
it must be repaired either directly by JURA or
by an authorised JURA service centre.
Make sure that the ENA and the mains cable
U
are not located close to hot surfaces.
Be careful to ensure that the mains cable is not
U
trapped and does not rub against sharp edges.
Never open and repair the machine yourself.
U
Do not modify the machine in any way that is
not described in these instructions for use. The
machine contains live parts. If opened, there is
a danger of potentially fatal injury. Repairs
may only be carried out by authorised JURA
service centres, using original spare parts and
accessories.
A defective machine is not safe and could cause
injury or fire. To avoid damage and any associated
risk of injury or fire:
Never allow the mains cable to loosely hang
U
down. The mains cable could pose a tripping
hazard or become damaged.
Protect the ENA from environmental influ-
U
ences such as rain, frost and direct sunlight.
Do not immerse the ENA, mains cable or
U
connections in water.
Do not put the ENA or any individual parts in
U
the dishwasher.
Switch your ENA off before cleaning work with
U
the On/Off button. Always wipe the ENA with a
damp cloth rather than a wet one, and protect
it from prolonged exposure to water splash.
Only connect the machine to the mains
U
voltage in accordance with the information on
the rating plate. The rating plate is located on
the underside of your ENA. Further technical
data is provided in these instructions for use
(see Chapter 9 ‘Technical data’).
Please only use original JURA maintenance
U
products. Use of products that are not
explicitly recommended by JURA could
damage the ENA.
Do not use any coffee beans treated with
U
additives or caramelised coffee beans.
Only fill the water tank with fresh, cold water.
U
Do not fill the bean container with water.
U
Switch the machine off with the On/Off button
U
if you are going to be absent for a longer
period of time and remove the mains plug
from the power socket.
People, including children, who
do not have the physical, sensory or mental
U
capabilities to use the machine safely or
6
1 Preparing and using for the first time
de
are inexperienced or lack knowledge in how to
U
use the machine safely
must be supervised by a responsible person when
using it, or must be instructed in how to use it
correctly.
Safety when handling the CLARIS Blue filter
cartridge:
Filter cartridges should be kept out of the
U
reach of children.
Store filter cartridges in a dry place in the
U
sealed packaging.
Protect cartridges from heat and direct
U
sunlight.
Do not use damaged filter cartridges.
U
Do not open filter cartridges.
U
1 Preparing and using for the
first time
This chapter provides you with the information
you need to use your ENA without any problems.
You will prepare your ENA step-by-step to enjoy
your first perfect cup of coffee.
Setting up the machine
When setting up your ENA, please note the
following:
Place the machine on a horizontal surface that
U
is not sensitive to water.
Choose a spot for your ENA which protects the
U
machine against overheating. Ensure that the
ventilation slots are not covered.
Filling the water tank
To enjoy the perfect cup of coffee we recommend
changing the water every day.
CAUTION
Milk, sparkling mineral water or other liquids can
damage the water tank or the machine.
T Only fill the water tank with fresh, cold water.
T Remove the water tank and rinse with cold
water.
en
fr
it
nl
JURA on the Internet
Visit us on the Internet.
@ On the JURA website (www.jura.com) you
will find interesting and up-to-date
information on your ENA and on every
aspect of coffee.
3-colour plain text display
Your ENA features a 3-colour plain text display. The
colours of the display texts have the following
meanings:
Green: The ENA is ready for use.
U
Red: The ENA is prompting you to perform
U
some action.
Yellow: You are in programming mode.
U
T Fill the water tank with fresh, cold water and
reinsert it.
Filling the bean container
CAUTION
Coffee beans which have been treated with
additives (e.g. sugar), preground coffee or
freeze-dried coffee will damage the grinder.
T Only use untreated coffee beans to refill the
bean container.
T Remove the bean container cover.
es
pt
ru
7
1 Preparing and using for the first time
T Remove any dirt or foreign objects from
inside the bean container.
T Fill the bean container with coffee beans.
T Close the bean container.
First-time use
E The On/Off button also acts as a power
switch. When the ENA is switched off, the
machine does not consume standby energy.
J WARNING
If the machine is operated with a defective mains
cable, there is a danger of potentially fatal electric
shock.
T Never use a machine which is damaged or
has a defective mains cable.
Precondition: The water tank and bean container
are full.
T Insert the mains plug into a power socket.
Q T Press the On/Off button to switch the
machine on.
SPRACHE DEUTSCH
g T Turn the Rotary Switch until the required
language is displayed, for example
LANGUAGE ENGLISH.
k T Press the Rotary Switch to confirm the
language setting.
OK, the language is set.
PRESS ROTARY
T Place a receptacle under the dual spout.
k T Press the Rotary Switch.
SYSTEM FILLING
HEATING
PRESS ROTARY
k T Press the Rotary Switch to start the rinse.
RINSING, the system rinses itself,
stopping automatically.
READY
Inserting and activating the filter
Your ENA no longer has to be descaled if you are
using the CLARIS Blue filter cartridge.
E Perform the ‘inserting the filter’ operation
without any interruptions. This will ensure
that your ENA always produces its best.
Precondition:
k T Press and hold the Rotary Switch until
READY is displayed.
RINSE appears.
g T Turn the Rotary Switch until
displayed.
k T Press the Rotary Switch to enter the
programme item.
FILTER- is
NO-
g T Turn the Rotary Switch until YESp is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK
INSERT FILTER
T Remove and empty the water tank.
T Open the filter holder.
8
1 Preparing and using for the first time
de
T Insert the filter cartridge into the water tank,
exerting slight pressure.
T Close the filter holder. It will click into place
audibly.
E After two months, the filter will cease to
work. You can check the elapsed time by
referring to the date plate on the filter holder
in the water tank.
T Fill the water tank with fresh, cold water and
reinsert it.
T Place a receptacle (at least 500 ml) under the
hot-water nozzle.
k T Press the Rotary Switch.
OPEN TAP
l T Turn the switch anticlockwise to position m.
FILTER RINSING, water flows out of
the hot-water nozzle.
Determining and adjusting the water
hardness
E If you are using the CLARIS Blue filter
cartridge and have activated it in programming mode, you will not be able to adjust
the water hardness.
The harder the water is, the more frequently the
ENA needs to be descaled. It is therefore important
to adjust the water hardness.
The water hardness can be adjusted on a continuous scale between 1° dH and 30° dH.
Determining the water hardness
You can find out what the water hardness is by
using the Aquadur® test strip supplied as standard.
T Hold the test strip briefly (for one second)
under running water.
T Shake off the water.
T Wait for about one minute.
T You will then be able to read the degree of
water hardness from the discolouration of
the Aquadur® test strip and the description
on the packaging.
en
fr
it
nl
E You can interrupt rinsing of the filter at any
time. To do this, turn the switch clockwise.
Turn the switch anticlockwise to continue
rinsing the filter.
E The water may be slightly discoloured. This
is not harmful to health and does not affect
the taste.
Rinsing of the filter stops automatically,
CLOSE TAP.
y T Turn the switch clockwise to position o.
HEATING
READY
The filter is now activated.
The water hardness can now be adjusted.
Adjusting the water hardness
Example: Change the water hardness setting from
16°dH to 25°dH.
Precondition:
k T Press and hold the Rotary Switch until
READY is displayed.
RINSE appears.
g T Turn the Rotary Switch until
is displayed.
HARDNESS
es
pt
ru
9
Loading...