Page 1
Low lift truck with additional
mast lift for comfortable
order picking and stacking
Powerful thanks to
maintenance-free 3-phase
AC drive motor
Manoeuvrable and
compact thanks to the
short chassis length
Fully manoeuvrable with
tiller in upright position
due to crawl speed button
Integrated charger for
easy charging at any
mains socket (optional)
EJE C20
Electric pedestrian pallet truck (2,000 kg)
The EJE C20 is a pedestrian pallet truck
which can also be used for order picking
and light stacking operations. In addition
to the support arm lift the load can be
raised to an overall height of 752 mm via
a simplex mast contained in the battery
compartment. This allows the operator
for example to pick goods at a comfortable height.
Light stacking operations, such as
stacking half Euro pallets, can be easily
undertaken with the separate support
arm and mast lift (optional). The support
arm lift capacity is 2000 kg while the
mast lift capacity is 700 kg.
There is also a powerful AC drive motor.
The eciency of this motor ensures high
speeds and excellent acceleration with
low energy consumption ideal for high
productivity.
The operator has everything under
control at all times, thanks to the low
mounted long tiller. This provides
sucient distance between the operator
and the truck. Especially when cornering
the EJE C20 never gets too close to the
operator. If space is at a premium, the
crawl speed button makes travelling safe
with the tiller in the upright position. A
touch of the button is sucient: The
brake is released and activation of the
travel switch automatically reduces the
speed of travel.
The re-designed multi-functional tiller
arm is full of innovations: Sealed sensor
system (IP 65) for maximum breakdown
protection, rocker switches with contactless electronics for precise operation
in any tiller position, ergonomically arranged switches.
Page 2
EJE C20
I
x
c
h
14 max.
h
14 min.
849
35
150
y
Q
h
3
h
5
m
s
2
l
1
h
13
Vertical battery removal
b
1
a
2
Sideways battery removal
l
2
Wa
l
6
Ast
R
e
b
5
b
b
12
11
a
2
Page 3
Technical data in line with VDI 2198
1.1 Manufacturer (short form) Jungheinrich
1.2 Model EJE C20
1.3 Drive Electrics
1.4 Manual, pedestrian, stand-on, seated, order picker operation pedestrian
1.5 Load capacity/rated load Q t 2
1.5.1 Load capacity/mast lift Q t 0.7
1.5.2 Load capacity/support arm lift Q t 2
Identification
1.6 Load centre distance c mm 600
1.8 Load distance x mm 903
1.9 Wheelbase y mm 1480
2.1.1 Net weight incl. battery (see row 6.5) kg 555
2.2 Axle load, w. load, front / rear kg 860 / 1695
2.3 Axle load, w.o. load, front / rear kg 425 / 130
Weights
3.1 Tyres PU/PU
3.2 Tyre size, at front mm Ø 230 x 70
3.3 Tyre size, at rear mm Ø 82 x 100
3.4 Additional wheels (dimensions) mm Ø 100 x 40
3.5 Wheels, number front/rear (× = driven wheels) 1x +2/2 or 4
3.6 Track width, front b
Wheels / chassis
3.7 Track width, rear b
4.4 Lift h
4.6 Initial lift h
4.9 Height of tiller in drive position min. / max. h
4.15 Lowered height h
4.19 Overall length l
4.20 Length incl. back of forks l
4.21 Total width b
4.22 Fork dimensions s/e/l mm 60 / 187 / 1150
4.25 Width over forks b
Basic dimensions
4.32 Floor clearance centre wheelbase m
4.33 Aisle width for pallets 1000 × 1200 sideways Ast mm 1968
4.34 Aisle width for pallets 800 × 1200 lengthways Ast mm 2018
4.35 Turning radius Wa mm 1521
5.1 Travel speed, w. / w.o. load km/h 6 / 6
5.2 Lift speed, w. / w.o. load m/s 0.12 / 0.17
5.3 Lower speed, w. / w.o. load m/s 0.13 / 0.2
data
5.8 Max. gradeability, laden/unladen % 8 / 20
Performance
5.10 Service brake electric
6.1 Drive motor rating S2 60 min. kW 1.0
6.2 Lift motor rating at S3 10% kW 1.2
6.3 Battery according to DIN 43531/35/36 A,B,C, no nein/B
6.4 Battery voltage/nominal capacity K5 V/Ah 24 / 150
Electrics
6.5 Battery weight kg 151
6.6 Energy consumption according to VDI cycle kWh/h 0.4 4
8.1 Type of drive control AC SpeedControl
8.4
Misc.
Sound pressure level at operator’s ear according to EN
12053
mm 508
10
mm 343
11
mm 540
3
mm 122
5
mm 797 / 1313
14
mm 90
13
mm 1734
1
mm 584
2
mm 720
1/b2
mm 540
5
mm 30
2
dB (A) 70
Issue: 05/2011
3)
3)
2)
1)
3)
1)
Load section lowered: + 55 mm; diagonal in accordance with VDI + 202 mm
2)
Load section lowered: + 55 mm; Diagonal to VDI + 367 mm
3)
Load section raised / lowered: + 55 mm
In accordance with VDI Guideline 2198 this specification sheet provides details of the standard truck only. Non-standard tyres, different masts, optional equipment, etc. may
result in different values.
Page 4
Benefit from the advantages
In operation in a store
Innovative 3-phase AC technology
Jungheinrich 3-phase AC motors oer
greater performance whilst at the same
time reducing operating costs over the
entire life of the truck:
• High eciency levels with excellent
energy management.
• Powerful acceleration.
• Stepless smooth control of the travel
speed via the travel switch.
• Rapid travel direction change without
pause.
• No carbon brushes – maintenancefree drive motor.
• Two year warranty on the drive motor.
Optimum cornering
Sprung and hydraulically cushioned support wheels linked via the ProTracLink
torsion bar – distribute equalising forces
dependent on travel conditions i.e.
evenly across all wheels during straightline travel; concentrated on the outer
support wheel during cornering.
Fully informed at all times
Extensive instrument display and setting
options allow the operator to monitor
the situation at a glance:
• Discharge indicator (3 colour LED) with
lift cut-out.
• Adjustable drive parameters through
CanDis and CanCode (optional).
• CanDis information display (optional)
with additional service hour display and
service data storage.
• PIN activation of truck and choice of
3 travel programmes via CanCode
(optional).
Comfortable operation
The SpeedControl impulse control system facilitates comfortable, safe travel:
• The speed set by the drive switch is
maintained under all travel conditions
– even on gradients / descents.
• If the EJE C20 starts to roll away on the
ramp it brakes automatically.
• Individually adjustable drive parameters
(acceleration, top speed, motor brake)
enable the truck to be tailored to
individual requirements.
• The operator may choose from 3 different travel programs (optional).
• Energy recovery through regenerative
braking on deceleration.
• Very low noise level when travelling.
Reduced maintenance costs
Service-friendly components ensure a
significant long-term reduction in operating costs:
• Maintenance-free AC drive motor with
no carbon brushes.
• Easy access to all parts with one-piece
front panel with just 2 screws.
• Excellent protection against dust and
humidity through enclosure of controller and connectors to IP 54.
• The ProtracLink technology reduces
tyre wear when operating on a ramp
due to equalising eect of the torsion
bar. This bar also keeps the support
wheels at the same height and when
they go over the edge of a loading
dock or dock-leveller, unlike a spring
loaded wheel they easily drive back
into dafety.
Optimum pallet handling
• Enclosed skids on both fork tips for
easy entry into empty Euro or perimeter based pallets.
• Separate control of mast and support
arm lift to remove semi / quarter pallets
from Euro pallets (option).
Long uptimes
The energy-saving 3-phase AC system
combined with a 250 Ah battery capacity
ensures long operation times:
• 2 PzB 200 Ah batteries for vertical
battery removal.
• Sideways battery removal (optional) for
2 PzB 250 Ah batteries.
• On-board charger (24V/30 A for wet
cell batteries and maintenance-free
batteries) for easy charging at any
mains socket (optional).
Optional equipment
• Writing pad with light
• Load backrest.
• Special key switch for easy brake
release.
• Cold store version.
Jungheinrich UK Ltd.
Head Oce:
Sherbourne House
Sherbourne Drive
Tilbrook
Milton Keynes MK7 8HX
Telephone 01908 363100
Fax 01908 363180
info@jungheinrich.co.uk
www.jungheinrich.co.uk
The German production
facilities in Norderstedt and
Moosburg are certified.
Jungheinrich fork lift
trucks meet European
safety requirements.
T_EJE C20_042014_en_UK_000
Loading...