Screw-in RTD temperature probes
with plug connector
Temperature range from -50 to +270 °C
Shakeproof design
Application areas: utility vehicles, construction and agricultural machinery, motors,
compressors and railway technology
Plug connection locked contact stable, protection type IP67 (IP69K)
Screw-in RTD temperature probes in vibration proof design allow temperature measuring under
pressure in utility vehicles, construction and agricultural machinery, motors, compressors and
in railway technology.
The plug connectors between the protection fitting and the connection cable are locked contact
stable and have the protection type IP67 (IP69K) when connected.
A Pt100 temperature sensing element according to DIN EN 60751, class B, with a 2-wire circuit
is used as a measuring insert.
Other possibilities are versions with Pt500 or Pt1000 as well as PTC/NTC temperature sensing
elements.
Data sheet 902040Page 1/6
Technical Data
ConnectionBasic type 902040/10: AMP plug connector (Junior-Power-Timer) with gold-plated contacts,
Basic type 902040/12: Machine connector M12, IP67 when connected
Basic type 902040/15: Bayonet connector according to DIN 72585, IP69K when connected
Basic type 902040/17: Bosch compact connector 1.1, IP67 when connected
Process connectionThread, stainless steel or brass
Protection tubeStainless steel or brass
Measuring insertPt100 temperature probe, DIN EN 60751, class B, 2-wire circuit
Protection typeIP67 (IP69K), when connected
Response timesin water with 0.4 m/s
Ø 4 mm: t
= 1.2 s, t
0.5
AccessoriesCoupling for basic type 902040/10 without or with a 2.5 m long connection cable,
silicone-insulated,
coupling for basic type 902040/12, 902040/15 and 902040/17, data sheet 909760.
Order details: Screw-in RTD temperature probe with AMP plug connector or Bosch compact connector 1.1
(1) Basic type
902040/10
902040/17
Screw-in RTD temperature probe
with AMP plug connector (Junior-Power-Timer)
Screw-in RTD temperature probe
with Bosch compact connector 1.1, 2-pin
(2) Operating temperature in °C
x x370-50 to +150 °C
x387-50 to +270 °C (short-term +300 °C)
(3) Measuring insert
x x10031 x Pt100 in 2-wire circuit
x x10041 x Pt500 in 2-wire circuit
x x10051 x Pt1000 in 2-wire circuit
x x99991 x PTC or NTC temperature probes in 2-wire circuit (specify in plain text)
(4) Tolerance class according to DIN EN 60751
x x0Technical data of PTC or NTC temperature probes
xx1Class B (Standard)
xx2Class A
(5) Protection tube diameter D in mm
x x6Ø 6 mm (Standard for EL = 60 mm)
x x7.5Ø 7.5 mm, stepped down to 4 mm
(6) Fitting length EL in mm
x x2525 mm
x x2626 mm
x x2929 mm
x x6060 mm
(7) Process connection
x x102Screw connection G 1/4
x x103Screw connection G 3/8
x x114Screw connection M10x1
x x118Screw connection M12x1.5
x x121Screw connection M14x1.5
x x141Screw connection NPTF 1/8"-27
Order details: Screw-in RTD temperature probe with machine connector M12
(1) Basic type
Data sheet 902040Page 5/6
902040/12
Screw-in RTD temperature probe
with machine connector M12
(2) Operating temperature in °C
x370-50 to +150 °C
(3) Measuring insert
x10031 x Pt100 in 2-wire circuit
x10041 x Pt500 in 2-wire circuit
x10051 x Pt1000 in 2-wire circuit
x99991 x PTC or NTC temperature probes in 2-wire circuit (specify in plain text)
(4) Tolerance class according to DIN EN 60751
x0Technical data of PTC or NTC temperature probes
x1Class B (Standard)
x2Class A
(5) Protection tube diameter D in mm
x7.5Ø 7.5 mm, stepped down to 4 mm
(6) Fitting length EL in mm
x2929mm
x3636mm
(7) Process connection
x121Screw connection M14x1.5
x141Screw connection NPTF 1/8“-27
x542Screw connection R 3/8 according to DIN EN 10226-1
Order details: Screw-in RTD temperature probe with bayonet connector according to DIN 72585
(1) Basic type
902040/15
Screw-in RTD temperature probe
with bayonet connector according to DIN 72585
(2) Operating temperature in °C
x382-50 to +220 °C
(3) Measuring insert
x10031 x Pt100 in 2-wire circuit
x10041 x Pt500 in 2-wire circuit
x10051 x Pt1000 in 2-wire circuit
x99991 x PTC or NTC temperature probes in 2-wire circuit (specify in plain text)
(4) Tolerance class according to DIN EN 60751
x0Technical data of PTC or NTC temperature probes
x1Class B (Standard)
x2Class A
(5) Protection tube diameter D in mm
x7.5Ø 7.5 mm, stepped down to 4 mm
(6) Fitting length EL in mm
x2929mm
(7) Process connection
x121Screw connection M14x1.5
(8) Protection tube material
x20Stainless steel
x46Brass
(1)(2)(3)(4)(5)(6)(7)(8)
Order code-------
Order example902040/15-382-1003-1-7.5-29-121-20
Accessories
Part no.
Coupling set, 6 pieces, Junior-Power-Timer00089930
Coupling set, 4 pieces, Junior-Power-Timer00201426
Coupling for basic type 902040/10 with a 2.5 m long connection cable, silicone-insulated00308880
Coupling for basic type 902040/1500439715