Screw-in RTD temperature probe
with terminal head form J
■ For temperatures from -50 to +400°C
■ As single or double RTD temperature probes
■ Available with transmitter
■ Protection class IP65
Screw-in RTD temperature probes are preferentially used for measuring temperatures in liquids
and gases. A decisive selection criterion is the reliable sealing feature of this installation type
with vacuum and with overpressure. The application areas are, among others, in the air
conditioning technology and refrigeration engineering as well as the HVAC, kiln and apparatus
engineering sector.
The measuring insert is normally fitted with a Pt100 temperature sensor according to DIN EN
60751, Class B in 2-wire circuit; versions with Pt500 or Pt1000 temperature sensors can also
be supplied, as well as 3- and 4-wire circuit connections. A transmitter can be optionally
integrated into the connection head.
Data Sheet 90.2030 (90.2003)Page 1/4
Technical Data
Terminal headForm J, die-cast aluminum, M 16x1.5; IP65, ambient temperature -40 to +100 °C
Process connectionthread, stainless steel 1.4571
Protection tubeStainless steel 1.4571, Ø 6 mm and Ø 8 mm
Measuring insertPt100 temperature sensor according to DIN EN 60751, Class B, two-wire circuit
Response timest
TransmitterAnalog transmitter, output 4 to 20 mA, Data sheet 70.7030
AccessoriesSheath, Data Sheet 90.9710 (90.9721)
Caution: reduced ambient temperature range when using transmitters,
Data Sheet 70.7030
= 5 sec, t
0.5
= 14 sec, in water 0.4 m/sec, 6 mm dia.
0.9
2010-03-04/00311469
JUMO GmbH & Co. KG
Delivery address:Mackenrodtstraße 14,
Postal address:
Phone:+49 661 6003-0
Fax:+49 661 6003-607
e-mail:mail@jumo.net
Internet:www.jumo.net
36039 Fulda, Germany
36035 Fulda, Germany
Dimensions
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM 20 2TT, UK
Phone: +44 1279 635533
Fax:+44 1279 635262
e-mail: sales@jumo.co.uk
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
8 Technology Boulevard
Canastota, NY 13032, USA
Phone: 315-697-JUMO
Order details: Screw-in RTD temperature probe with terminal head form J
(1) Basic type
1-800-554-JUMO
Data Sheet 90.2030 (90.2003)Page 3/4
902030/10
Screw-in RTD temperature probes
with continuous sheath
Screw-in RTD temperature probes
902030/11
with stepped sheath
(with Ø 6 to Ø 3.8 mm; with Ø 8 to Ø 6 mm)
Screw-in RTD temperature probes
902030/31
with stepped sheath
for air measurement
Screw-in RTD temperature probes
902030/80
with spring-loaded connection,
12 mm spring deflection,
connection head rotatable by 360°
(2) Operating temperature in °C
x x647-20 to +150 °C (only in conjunction with class B and 1x Pt100/1x Pt1000 in 2-wire circuit)
x378-50 to +180 °C
x x x380-50 to +200 °C
x x386-50 to +260 °C
x x402-50 to +400 °C
(3) Measuring insert
x x x x10011x Pt100 in 3-wire-circuit
x x x x10031x Pt100 in 2-wire circuit
x x x x10051x Pt1000 in 2-wire circuit
x x x x10111x Pt100 in 4-wire circuit
x x x x20032x Pt100 in 2-wire circuit
(4) Tolerance class according to EN 60751
xxxx1Class B (standard)
xxxx2Class A
(5) Protection tube diameter D in mm
xxx6Ø6mm (standard)
xx8 Ø8mm
(6) Fitting length EL in mm (100 ≤ EL ≤ 1000)
xx5050 mm
x x x x100100 mm
x x x x150150 mm
x x x x250250 mm
x x x x300300 mm
x x x x...Specification in plain text (50 mm steps)
(7) Process connection
x x x102Screw connection (thread) G 1/4
x x x103Screw connection (thread) G 3/8
x x x x104Screw connection (thread) G 1/2
(8) Extra codes
x x x x000without extra codes
x x x x3301x analog transmitter, 4 to 20 mA
1
output, Data sheet 70.7030
Order code------/
(1)(2)(3)(4)(5)(6)(7)(8)
Order example902030/10-402-1001-1-6-100-104/000
1
Specify measuring range in plain text.
2010-03-04/00311469
JUMO GmbH & Co. KG
Delivery address:Mackenrodtstraße 14,
Postal address:
Phone:+49 661 6003-0
Fax:+49 661 6003-607
e-mail:mail@jumo.net
Internet:www.jumo.net
36039 Fulda, Germany
36035 Fulda, Germany
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM 20 2TT, UK
Phone: +44 1279 635533
Fax:+44 1279 635262
e-mail: sales@jumo.co.uk
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
8 Technology Boulevard
Canastota, NY 13032, USA
Phone: 315-697-JUMO