RTD Temperature Probe
for Devices and Plants Tested/
Inspected According to DIN EN 14597
• For heat transmission plants according to DIN 4754
• For temperatures of up to 700 °C
•As single, double, or triple RTD temperature probes
• For water, oil, or air
•For tested control and limitation devices
The RTD temperature probes specified in this data sheet can be used in connection with temperature control and limitation devices tested/inspected according to DIN EN 14597 (DIN 3440)
in heat transmission plants according to DIN 4754.
RTD temperature probes are the preferred choice for measuring temperatures in liquids and
gases. Application areas include air conditioning and refrigeration technology as well as heating, furnace/kiln, and apparatus engineering.
Form B terminal heads are suitable for ambient temperatures up to 100 °C.
Protection tubes made of various materials protect the measuring insert against chemical influ-
ences and mechanical damage. The appropriate protection tube mater ial is selected ac cording
to the conditions on site.
A Pt100 temperature sensor according to DIN EN 60751, class B is used in the measuring insert
in a 2-wire-circuit as standard.
Changes to the described versions require new design approval.
Important information: state the part no. from price sheet 902006 when ordering!
65 to 670710G 1/2-170 to +55090.272-F03-902006/54-227-1003-1-15-710-254/000
65 to 670710G 1/2-170 to +550-90.272-F02902006/54-227-2003-1-15-710-254/000
Important information: Please observe the internal lead wire resistance with respect to the operating tem perature;
see the final page for the resistance values.
Operating media: water and oil
Operating pressure: max. 27 bar up to 100 °C, 20 bar up to 400 °C, pressureless as of 400 °C
Pos. 1
Versions only for connecting a
JUMO safetyM STB/STW Ex type 701155
65 to 670710G 1/2-170 to +550x-902006/54-227-1003-1-15-710-254/922
65 to 670710G 1/2-170 to +550-x902006/54-227-2003-1-15-710-254/922
Important information: Please observe the internal lead wire resistance with respect to the operating tem perature;
Operating media: water and oil
Operating pressure: max. 27 bar up to 100 °C, 20 bar up to 400 °C, pressureless as of 400 °C
100G 1/2-40 to +400902006/10-402-1003-902006/10-402-1003-1-9-100-104/000
150G 1/2-40 to +400x-902006/10-402-1003-1-9-150-104/000
200G 1/2-40 to +400x-902006/10-402-1003-1-9-200-104/000
100G 1/2-40 to +400-902006/10-402-2003902006/10-402-2003-1-9-100-104/000
150G 1/2-40 to +400-x902006/10-402-2003-1-9-150-104/000
200G 1/2-40 to +400-x902006/10-402-2003-1-9-200-104/000
Operating media: water and oil
Operating pressure: max. 35 bar up to 100 °C, 20 bar up to 400 °C, pressureless as of 400 °C
● Available from stock.Pos. 2
Versions only for connecting a
JUMO safetyM STB/STW Ex type 701155
Insertion
length
EL in mm
Steel protection tube St 35.8, material-no. 1.0305
250G 1/2-170 to +480x-902006/10-226-1003-1-9-250-104/922
250G 1/2-170 to +480-x902006/10-226-2003-1-9-250-104/922
100G 1/2-40 to +400x-902006/10-402-1003-1-9-100-104/922
150G 1/2-40 to +400x-902006/10-402-1003-1-9-150-104/922
200G 1/2-40 to +400x-902006/10-402-1003-1-9-200-104/922
100G 1/2-40 to +400-x902006/10-402-2003-1-9-100-104/922
150G 1/2-40 to +400-x902006/10-402-2003-1-9-150-104/922
200G 1/2-40 to +400-x902006/10-402-2003-1-9-200-104/922
Operating media: water and oil
Operating pressure: max. 35 bar up to 100 °C, 20 bar up to 400 °C, pressureless as of 400 °C
Screw-in RTD temperature probe
with weld-in sleeve and terminal head
according to DIN 43729, form B, M24 × 1.5
Data Sheet 902006Page 5/12
Insertion
a
length
Length
L in mm
EL in mm
Steel welding shoulder 15 Mo 3, material-no. 1.5415
Steel protection tube St 35.8, material-no. 1.0305
Length L1
in mm
Temperature
range in °C
Type
up to February
28, 2013
1× Pt100
Type
up to February
28, 2013
2× Pt100
Type
up to February
28, 2013
3× Pt100
Type
as of March 01, 2013
Order code
1008096-40 to +480 90.239-F01--902006/53-507-1003-1-12-100-815/000
16014096-40 to +480 90.239-F11--902006/53-507-1003-1-12-160-815/000
190170146-40 to +400 90.239-F03--902006/53-505-1003-1-12-190-815/000
22020096-40 to +480 90.239-F21 ● --902006/53-507-1003-1-12-220-815/000 ●
1008096-40 to +480 -90.239-F02 ●-902006/53-507-2003-1-12-100-815/000 ●
16014096-40 to +480 -90.239-F12-902006/53-507-2003-1-12-160-815/000
190170146-40 to +400 -90D239-F03 ● -902006/53-505-2003-1-12-190-815/000 ●
22020096-40 to +480 -902006/
902006/53-507-2003-1-12-220-815/000 ●
53-507-2003 ● -
1008096-40 to +400 --90.239-F07902006/53-505-3003-1-12-100-815/000
16014096-40 to +400 --90.239-F17902006/53-505-3003-1-12-160-815/000
22020096-40 to +400 --90.239-F27902006/53-505-3003-1-12-220-815/000
Operating media: water and oil
Operating pressure: max. 103 bar up to 100 °C, 30 bar up to 480 °C
● Available from stock.Pos. 3
a
Insertion length of the RTD temperature probe
Versions only for connecting a
JUMO safetyM STB/STW Ex type 701155
Insertion
a
length
EL in mm
Steel welding shoulder 15 Mo 3, material-no. 1.5415
Steel protection tube St 35.8, material-no. 1.0305
Length
L in mm
Length L1
in mm
Temperature
range in °C
1× Pt1002× Pt1003× Pt100Type
Order code
1008096-40 to +480 x--902006/53-507-1003-1-12-100-815/922
16014096-40 to +480 x--902006/53-507-1003-1-12-160-815/922
190170146-40 to +400 x--902006/53-505-1003-1-12-190-815/922
22020096-40 to +480 x--902006/53-507-1003-1-12-220-815/922
1008096-40 to +480 -x-902006/53-507-2003-1-12-100-815/922
16014096-40 to +480 -x-902006/53-507-2003-1-12-160-815/922
190170146-40 to +400 -x-902006/53-505-2003-1-12-190-815/922
22020096-40 to +480 -x-902006/53-507-2003-1-12-220-815/922
1008096-40 to +400 --x902006/53-505-3003-1-12-100-815/922
16014096-40 to +400 --x902006/53-505-3003-1-12-160-815/922
22020096-40 to +400 --x902006/53-505-3003-1-12-220-815/922
Operating media: water and oil
Operating pressure: max. 103 bar up to 100 °C, 30 bar up to 480 °C
Screw-in RTD temperature probe
with weld-in sleeve and stainless steel braided
0.35 mm2 connecting cable and anti-kink protection
Data Sheet 902006Page 6/12
Insertion
a
length
EL in mm
Length
L in mm
Temperature
range in °C
Type
up to February
28, 2013
1× Pt100
Type
as of March 01, 2013
Order code
Steel welding shoulder 15 Mo 3, material-no. 1.5415
Steel protection tube St 35.8, material-no. 1.0305
10080-170 to +48090.280-F32902006/40-226-1003-1-12-100-815/000
160140-170 to +48090.280-F31902006/40-226-1003-1-12-160-815/000
220200-170 to +48090.280-F30902006/40-226-1003-1-12-220-815/000
Operating media: water and oil
Operating pressure: max. 103 bar up to 100 °C, 30 bar up to 480 °C
a
Insertion length of the RTD temperature probe
Pos. 4
Versions only for connecting a
JUMO safetyM STB/STW Ex type 701155
Insertion
a
length
EL in mm
Steel welding shoulder 15 Mo 3, material-no. 1.5415
Steel protection tube St 35.8, material-no. 1.0305
Length
L in mm
10080-170 to +480x902006/40-226-1003-1-12-100-815/922
160140-170 to +480x902006/40-226-1003-1-12-160-815/922
220200-170 to +480x902006/40-226-1003-1-12-220-815/922
Operating media: water and oil
Operating pressure: max. 103 bar up to 100 °C, 30 bar up to 480 °C
50 to 460500-170 to +700x-902006/65-228-1003-1-15-500-668/000
50 to 670710-170 to +700x-902006/65-228-1003-1-15-710-668/000
50 to 9601000-170 to +700x-902006/65-228-1003-1-15-1000-668/000
50 to 460500-170 to +700-90.271-F01902006/65-228-2003-1-15-500-668/000 ●
50 to 670710-170 to +700-90.272-F01902006/65-228-2003-1-15-710-668/000
50 to 9601000-170 to +700-90.273-F01902006/65-228-2003-1-15-1000-668/000
Important information: Please observe the internal lead wire resistance with respect to the operating tem perature;
see the final page for the resistance values.
Operating medium: air
● Available from stock. Pos. 5
Versions only for connecting a
JUMO safetyM STB/STW Ex type 701155
50 to 460500-170 to +700x-902006/65-228-1003-1-15-500-668/922
50 to 670710-170 to +700x-902006/65-228-1003-1-15-710-668/922
50 to 9601000-170 to +700x-902006/65-228-1003-1-15-1000-668/922
50 to 460500-170 to +700-x902006/65-228-2003-1-15-500-668/922
50 to 670710-170 to +700-x902006/65-228-2003-1-15-710-668/922
50 to 9601000-170 to +700-x902006/65-228-2003-1-15-1000-668/922
Important information: Please observe the internal lead wire resistance with respect to the operating tem perature;
50 to 460G 1/2500-170 to +700x-902006/55-228-1003-1-15-500-254/000
50 to 670G 1/2710-170 to +700x-902006/55-228-1003-1-15-710-254/000
50 to 960G 1/21000-170 to +700x-902006/55-228-1003-1-15-1000-254/000
50 to 460G 1/2500-170 to +700-x902006/55-228-2003-1-15-500-254/000 ●
50 to 670G 1/2710-170 to +700-x902006/55-228-2003-1-15-710-254/000
50 to 960G 1/21000-170 to +700-x902006/55-228-2003-1-15-1000-254/000
Important information: Please observe the internal lead wire resistance with respect to the operating tem perature;
see the final page for the resistance values.
Operating medium: air
● Available from stock.
Pos. 6
Versions only for connecting a
JUMO safetyM STB/STW Ex type 701155
50 to 460G 1/2500-170 to +700x-902006/55-228-1003-1-15-500-254/922
50 to 670G 1/2710-170 to +700x-902006/55-228-1003-1-15-710-254/922
50 to 960G 1/21000-170 to +700x-902006/55-228-1003-1-15-1000-254/922
50 to 460G 1/2500-170 to +700-x902006/55-228-2003-1-15-500-254/922
50 to 670G 1/2710-170 to +700-x902006/55-228-2003-1-15-710-254/922
50 to 960G 1/21000-170 to +700-x902006/55-228-2003-1-15-1000-254/922
Important information: Please observe the internal lead wire resistance with respect to the operating tem perature;
Allocation list of temperature probes to the respective JUMO devices
For connection to...
JUMO safetyM STB/STW type 701150
The temperature probes are suitable for use according to DIN EN 14597.
Based on the test report from TÜV-Nord no. SAS-110-2006TB-2.
Temperature probes for air
Type
as of March 01, 2013
Order code
Type
up to February 28,
2013
902006/65-228-1003-1-15-500-668/000-1× Pt100-170 to +700902006/65-228-1003-1-15-710-668/000-1× Pt100-170 to +700902006/65-228-1003-1-15-1000-668/000-1× Pt100-170 to +700902006/65-228-2003-1-15-500-668/00090.271-F012× Pt100-170 to +700902006/65-228-2003-1-15-710-668/00090.272-F012× Pt100-170 to +700902006/65-228-2003-1-15-1000-668/00090.273-F012× Pt100-170 to +700-
902006/55-228-1003-1-15-500-254/000-1× Pt100-170 to +700902006/55-228-1003-1-15-710-254/000-1× Pt100-170 to +700902006/55-228-1003-1-15-1000-254/000-1× Pt100-170 to +700902006/55-228-2003-1-15-500-254/000-2× Pt100-170 to +700902006/55-228-2003-1-15-710-254/000-2× Pt100-170 to +700902006/55-228-2003-1-15-1000-254/000-2× Pt100-170 to +700-
Measuring probeTemperature range
in °C
Weld-in sleeve
Temperature probes for water and oil
Type
as of March 01, 2013
Order code
Type
up to February 28,
2013
902006/54-227-1003-1-15-710-254/00090.272-F031× Pt100-170 to +550902006/54-227-2003-1-15-710-254/00090.272-F022× Pt100-170 to +550-
902006/10-226-1003-1-9-250-104/00090.2391× Pt100-170 to +480902006/10-226-2003-1-9-250-104/00090D2392× Pt100-170to +480902006/10-402-1003-1-9-100-104/000
902006/10-402-1003
902006/10-402-1003-1-9-150-104/000-1× Pt100-40 to +400902006/10-402-1003-1-9-200-104/000-1× Pt100-40 to +400902006/10-402-2003-1-9-100-104/000
902006/10-402-2003
902006/10-402-2003-1-9-150-104/000-2× Pt100-40 to +400902006/10-402-2003-1-9-200-104/000-2× Pt100-40 to +400-
902006/53-507-1003-1-12-100-815/00090.239-F011× Pt100-40 to +480x
902006/53-507-1003-1-12-160-815/00090.239-F111× Pt100-40 to +480x
902006/53-505-1003-1-12-190-815/00090.239-F031× Pt100-40 to +400x
902006/53-507-1003-1-12-220-815/00090.239-F211× Pt100-40 to +480x
902006/53-507-2003-1-12-100-815/00090.239-F022× Pt100-40 to +480x
902006/53-507-2003-1-12-160-815/00090.239-F122× Pt100-40 to +480x
902006/53-505-2003-1-12-190-815/00090D239-F032× Pt100-40 to +400x
902006/53-507-2003-1-12-220-815/000
902006/53-507-2003
902006/53-505-3003-1-12-100-815/00090.239-F073× Pt100-40 to +400x
902006/53-505-3003-1-12-160-815/00090.239-F173× Pt100-40 to +400x
902006/53-505-3003-1-12-220-815/00090.239-F273× Pt100-40 to +400x
Measuring probeTemperature range
in °C
1× Pt100-40 to +400-
2× Pt100-40 to +400-
2× Pt100-40 to +480x
Weld-in sleeve
902006/40-226-1003-1-12-100-815/00090.280-F321× Pt100-170 to +480x
902006/40-226-1003-1-12-160-815/00090.280-F311× Pt100-170 to +480x
902006/40-226-1003-1-12-220-815/00090.280-F301× Pt100-170 to +480x
JUMO safetyM TB/TW type 701160
JUMO safetyM TB/TW 08 type 701170
JUMO DICON 500 type 703570
JUMO DICON 501 type 703580
The temperature probes are suitable for use according to DIN EN 14597.
Based on the test report from TÜV-Süd no. C-T 1487-00/12.
Temperature probes for air
Type
as of March 01, 2013
Order code
Type
up to February 28,
2013
902006/65-228-1003-1-15-500-668/000-1× Pt100-170 to +700902006/65-228-1003-1-15-710-668/000-1× Pt100-170 to +700902006/65-228-1003-1-15-1000-668/000-1× Pt100-170 to +700902006/65-228-2003-1-15-500-668/00090.271-F012× Pt100-170 to +700902006/65-228-2003-1-15-710-668/00090.272-F012× Pt100-170 to +700902006/65-228-2003-1-15-1000-668/00090.273-F012× Pt100-170 to +700-
902006/55-228-1003-1-15-500-254/000-1× Pt100-170 to +700902006/55-228-1003-1-15-710-254/000-1× Pt100-170 to +700902006/55-228-1003-1-15-1000-254/000-1× Pt100-170 to +700902006/55-228-2003-1-15-500-254/000-2× Pt100-170 to +700902006/55-228-2003-1-15-710-254/000-2× Pt100-170 to +700902006/55-228-2003-1-15-1000-254/000-2× Pt100-170 to +700-
Measuring probeTemperature range
in °C
Weld-in sleeve
Temperature probes for water and oil
Type
as of March 01, 2013
Order code
Type
up to February 28,
2013
902006/54-227-1003-1-15-710-254/00090.272-F031× Pt100-170 to +550902006/54-227-2003-1-15-710-254/00090.272-F022× Pt100-170 to +700-
902006/10-226-1003-1-9-250-104/00090.2391× Pt100-170 to +480902006/10-226-2003-1-9-250-104/00090D2392× Pt100-170 to +480902006/10-402-1003-1-9-100-104/000
902006/10-402-1003
902006/10-402-1003-1-9-150-104/000-1× Pt100-40 to +400902006/10-402-1003-1-9-200-104/000-1× Pt100-40 to +400902006/10-402-2003-1-9-100-104/000
902006/10-402-2003
902006/10-402-2003-1-9-150-104/000-2× Pt100-40 to +400902006/10-402-2003-1-9-200-104/000-2× Pt100-40 to +400-
902006/53-507-1003-1-12-100-815/00090.239-F011× Pt100-40 to +480x
902006/53-507-1003-1-12-160-815/00090.239-F111× Pt100-40 to +480x
902006/53-505-1003-1-12-190-815/00090.239-F031× Pt100-40 to +400x
902006/53-507-1003-1-12-220-815/00090.239-F211× Pt100-40 to +480x
902006/53-507-2003-1-12-100-815/00090.239-F022× Pt100-40 to +480x
902006/53-507-2003-1-12-160-815/00090.239-F122× Pt100-40 to +480x
902006/53-505-2003-1-12-190-815/00090D239-F032× Pt100-40 to +400x
902006/53-507-2003-1-12-220-815/000
902006/53-507-2003
902006/53-505-2003-1-12-100-815/00090.239-F073× Pt100-40 to +400x
902006/53-505-3003-1-12-160-815/00090.239-F173× Pt100-40 to +400x
902006/53-505-3003-1-12-220-815/00090.239-F273× Pt100-40 to +400x
Measuring probeTemperature range
in °C
1× Pt100-40 to +400-
2× Pt100-40 to +400-
2× Pt100-40 to +480x
Weld-in sleeve
902006/40-226-1003-1-12-100-815/00090.280-F321× Pt100-170 to +480x
902006/40-226-1003-1-12-160-815/00090.280-F311× Pt100-170 to +480x
902006/40-226-1003-1-12-220-815/00090.280-F301× Pt100-170 to +480x
The temperature probes are suitable for use in potentially explosive areas according to DIN EN 14597.
Based on the test report from TÜV-Nord no. 12 203 556139.
Temperature probes for air
Type
as of March 01, 2013
Order code
Type
up to February 28,
2013
902006/65-228-1003-1-15-500-668/922-1× Pt100-170 to +700902006/65-228-1003-1-15-710-668/922-1× Pt100-170 to +700902006/65-228-1003-1-15-1000-668/922-1× Pt100-170 to +700902006/65-228-2003-1-15-500-668/92290.271-F012× Pt100-170 to +700902006/65-228-2003-1-15-710-668/92290.272-F012× Pt100-170 to +700902006/65-228-2003-1-15-1000-668/92290.273-F012× Pt100-170 to +700-
902006/55-228-1003-1-15-500-254/922-1× Pt100-170 to +700902006/55-228-1003-1-15-710-254/922-1× Pt100-170 to +700902006/55-228-1003-1-15-1000-254/922-1× Pt100-170 to +700902006/55-228-2003-1-15-500-254/922-2× Pt100-170 to +700902006/55-228-2003-1-15-710-254/922-2× Pt100-170 to +700902006/55-228-2003-1-15-1000-254/922-1× Pt100-170 to +700-
Measuring probeTemperature range
in °C
Weld-in sleeve
Temperature probes for water and oil
Type
as of March 01, 2013
Order code
Type
up to February 28,
2013
902006/54-227-1003-1-15-710-254/92290.272-F031× Pt100-170 to +550902006/54-227-2003-1-15-710-254/92290.272-F022× Pt100-170 to +700-
902006/10-226-1003-1-9-250-104/92290.2391× Pt100-170 to +480902006/10-226-2003-1-9-250-104/92290D2392× Pt100-170 to +480902006/10-402-1003-1-9-100-104/922
902006/10-402-1003
902006/10-402-1003-1-9-150-104/922-1× Pt100-40 to +400902006/10-402-1003-1-9-200-104/922-1× Pt100-40 to +400902006/10-402-2003-1-9-100-104/922
902006/10-402-2003
902006/10-402-2003-1-9-150-104/922-2× Pt100-40 to +400902006/10-402-2003-1-9-200-104/922-2× Pt100-40 to +400-
902006/53-507-1003-1-12-100-815/92290.239-F011× Pt100-40 to +480x
902006/53-507-1003-1-12-160-815/92290.239-F111× Pt100-40 to +480x
902006/53-505-1003-1-12-190-815/92290.239-F031× Pt100-40 to +400x
902006/53-507-1003-1-12-220-815/92290.239-F211× Pt100-40 to +480x
902006/53-507-2003-1-12-100-815/92290.239-F022× Pt100-40 to +480x
902006/53-507-2003-1-12-160-815/92290.239-F122× Pt100-40 to +480x
902006/53-505-2003-1-12-190-815/92290D239-F032× Pt100-40 to +400x
902006/53-507-2003-1-12-220-815/922
902006/53-507-2003
902006/53-505-3003-1-12-100-815/92290.239-F073× Pt100-40 to +400x
902006/53-505-3003-1-12-160-815/92290.239-F173× Pt100-40 to +400x
902006/53-505-3003-1-12-220-815/92290.239-F273× Pt100-40 to +400x
Measuring probeTemperature range
in °C
1× Pt100-40 to +400-
2× Pt100-40 to +400-
2× Pt100-40 to +480x
Weld-in sleeve
902006/40-226-1003-1-12-100-815/92290.280-F321× Pt100-170 to +480x
902006/40-226-1003-1-12-160-815/92290.280-F311× Pt100-170 to +480x
902006/40-226-1003-1-12-220-815/92290.280-F301× Pt100-170 to +480x
The internal lead wire causes a systematic measurement error in the versions 902006/54 and 902006/65.
This depends on both the nominal length (NL) as well as
the measured temperature. In the table, the error is
shown per 100 mm insertion length (EL) depending on
the temperature measurement.
Lead wire resistance of a 0.5 mm NiCr wire per 100 mminsertion length (EL) (double wire length).
The specifications are to be viewed as refere nce values.
2013-07-30/00311472
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.