JUMO 901050 User Manual

JUMO GmbH & Co. KG

Delivery address: Mackenrodtstraße 14,

Postal address:
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.net

36039 Fulda, Germany
36035 Fulda, Germany

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow - Essex CM20 2DY, UK
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

8 Technology Boulevard
Canastota, NY 13032, USA
Phone: 315-697-JUMO

1-800-554-JUMO
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.us

Screw-in thermocouples
with compensating cable

■ for temperatures from -200 to +600°C

■ available with different thermocouples

■ as single or twin thermocouple

■ compensating cable in silicone or with metal braiding

Screw-in thermocouples are preferred for measuring temperatures in liquids and gases. An
important selection criterion is their reliable sealing against both negative and positive
pressures. Applications include heating installations, ovens, furnaces and plant engineering.

Depending on the version, the compensating cables are suitable for use in dry and humid areas
within a temperature range from -20 to +350°C. The connection of the cable to the protection
tube incorporates strain relief and can be provided with a cable protector (option).

Protection tubes in stainles steel protect the measuring insert from chemical influences and
mechanical damage.

The measuring insert is fitted with thermocouples to EN 60 584 and DIN 43 710. Versions with
two thermocouples are also available.

Data Sheet 90.1050 (90.1005) Page 1/3

Technical data

Connection available with cable ends as: bare wires, ferrules, with receptacles or multipole connector
Compensating cable silicone, ambient temperature -50 to +180°C

metal braiding, ambient temperature -20 to +350°C

Process connection thread, stainless steel 1.4571
Protection tube stainless steel 1.4571, 6mm and 8mm dia.
Measuring insert insulated assembly:

Accessories pockets, Data Sheet 90.9721

1 x Fe-Con L, DIN 43 710, Cl. 2, operating temperature -200 to +600°C
1 x NiCr-Ni K, EN 60 584, Cl. 2, operating temperature -200 to +600°C
2 x Fe-Con L, DIN 43 710, Cl. 2, operating temperature -200 to +600°C
2 x NiCr-Ni K, EN 60 584, Cl. 2, operating temperature -200 to +600°C

2009-05-11/00314538

JUMO GmbH & Co. KG

Delivery address: Mackenrodtstraße 14,

Postal address:
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.net

36039 Fulda, Germany
36035 Fulda, Germany

Dimensions

JUMO Instrument Co. Ltd.

JUMO House
Temple Bank, Riverway
Harlow - Essex CM20 2DY, UK
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.co.uk

JUMO Process Control, Inc.

8 Technology Boulevard
Canastota, NY 13032, USA
Phone: 315-697-JUMO

1-800-554-JUMO
Fax: [phone]
E-mail: [e-mail]
Internet: www.jumo.us

Data Sheet 90.1050 (90.1005) Page 2/3

Type 901050/10 Type 901050/20 Type 901050/30

2009-05-11/00314538