Julabo ME-16G Data Sheet

Product data sheet 1/2

ME-16G Visco Bath

Visco Bath for internal temperature applications

JULABO Visco Baths are used for precise temperature applications with
capillary viscometers and density meters within the bath tank. The units offer
high temperature accuracy and optimal temperature distribution throughout
the bath. An integral cooling coil for cooling water is provided for temperature
applications below or near ambient temperatures. The units are equipped
with a holder for thermometers and therefore offer very good options for
temperature calibration procedures and comparisons with accredited
thermometers.

Your advantages

VFD COMFORT DISPLAY
Keypad for setpoints, warning/safety values and menu functions
PID3 cascade temperature control
ATC3 3-Point-Calibration
Pt100 External sensor connection for measurement and control
SMART PUMP, electronically adjustable pump stages
Early warning system for low liquid level (DBGM 203 06 059.8)
Adjustable high temperature cut-out, visible via display
RS232 interface for online communication
Integrated programmer for 10 program steps

ME-16G

Technical Data

Order No. 9162616
Model series TopTech
Category Visco Baths
Working temperature range (°C) +20 ... +100
Temperature stability (°C) ±0.01
Setting / display resolution 0.01 °C
Integrated programmer 1x10 steps
Temperature Display VFD
Heating capacity (kW) 2
Pump capacity flow rate (l/min) 11-16
Pump capacity flow pressure (psi) 3.3-6.5
Bath opening / bath depth (W x L / D inch) 3 x 3 / 0.8 / 12.2
Filling volume liters 16
External Pt100 sensor connection integrated
Digital interface RS232

Optional: Profibus
Ambient temperature 5...40 °C
Dimensions W x L x H (inch) Ø 11.4 x 18.9

Product data sheet 2/2

Weight (LBS) 20
Classification according to DIN12876-1 Classification III (FL)
Cooling coil integrated
Power requirement V / Hz / A 115/60/9
Number of viscometers 2
Available voltage versions 208 - 230 V / 50 - 60 Hz

100 - 115 V / 50 - 60 Hz

Characteristics

ME-16G

Display

A perfect view

Ample, easy to read VFD Comfort
display for simultaneous display of 3
values, warning functions, high
temperature cut-off, pump stages
(resolution 0.01 °C)

Pump stage and liquid level

Backlit indicator for selected pump
stages and filling volume on Presto®
PLUS, Magnum 91 & Forte HT

Operation

Comfortable and detailed

Comfortable keypad with additional
menu functions for pump stages,
calibration, control parameters,
programmer, warnings, etc.

Temperature Control

For higher demands

PID Temperature control with drift
compensation and adjustable
parameters, improved temperature
stability for external applications,
temperature stability ±0.01 °C
internal, <±0.1 °C external

100 % Cooling capacity

‘Active Cooling Control’ for cooling
available throughout the entire
working temperature range, fast
cool-down even at higher
temperatures

Technical Features

Clever pump system

Reliable and consistent pump
capacity, electronically adjustable
pump stages

Control from the external
application

External Pt100 sensor connection
for precise measurement and
control directly in the external
application

Serial connection

RS232 interface for PC connection,
e.g. for data communication and
recording of measured values

Easy program control

Integrated programmer for the
execution of time and temperature
dependant profiles, 1 temperature
profile with 10 steps max., with real
time clock

Enhanced protective functions

Maximum safety, adjustable high
temperature cut-off or dry-running
protection, additional display of
setpoints permits easy and precise
adjustments

For flammable bath fluids

Classification III (FL) according to
DIN 12876-1

Powered by TCPDF (www.tcpdf.org)

Highest measuring accuracy

‘Absolute Temperature Calibration’
for manual compensation of a
temperature difference, 3-point
calibration

Refrigeration Technology

Consistent cooling capacity

Easily removable venting grid for
quick and easy cleaning

Refer to www.julabo.us for more information regarding the entire JULABO product portfolio.
Technical changes without prior notification. Images may deviate from the original.

Warning & Safety Functions

Early warning system for low
liquid level

Maximum safety for applications,
optical and audible alarm, allows
user to refill bath fluid before the unit
shuts down

Early warning system for high/low
temperature limits

Maximum safety for applications,
optical and audible alarm,
convertible to automated cut-off
function