Page 1
Shift Digit Input
A Scope Frequncy
(1) Range Mode
H1
H2
L1
L2
Gain adjustment
screen
9.0
Explanation of header icons
100m
100
Set Shift ([▲SHIFT▼] key)
Turn OFF Shift ([SHIFT/ M OFF key])
Power OFF
Power ON/OFF ([BRILL] key)
Select Settings of Saved Function ([F1]/[F2] key)
Low
OFF
IR
Store Position / Store Image ([EVENT] key)
(1)
(2)
(3)
(4)
(5)
(6)
(9)
Display Menu List ([MENU] key)
Disp. Setup1
Range Setup
Shift Setup
BTM Search
Alarm1
Random Transmission
Noise Reduction
TX Power (HF)
TX Power (LF)
2 0 20 20
24
Return
Blue
Color
64 Color
Manual set
0%
JFC-180BB ECHO SOUNDER Quick Reference
Blank
:
Auto Range
:
Auto Shift
:
(2) Normal/Zoom Normal Zoom
(3) Shift status Same Indiv.
(4) Range status Same Indiv.
(5) Gain setting
:
:
:
:
*Vaule stands for current setting.
(6) CM status ~
Manual
Auto Range
Auto Shift
Hi-Freq. 1
Hi-Freq. 2
Lo-Freq. 1
Lo-Freq. 2
(7) Alarm set status] key assignment
Arrival Bottom
XTE Fish
(8) Image Speed
Speed-2~1 Stop Speed2 Speed3~9
(9) [EVENT] key assignment
Store Position Store Image Homing
(10) [F1] [F2] key assignment
IR Image Swap Event Key Usage
Color Erase Image Title Key Lock
Noise Reduction VRM Interval Depth Unit
Background Color NAV Start Color Tone
TVG Adjust Image Recall B.D. Mode
White Line
(11) SD Card
(12) USB Memory
Select Range ([▲RANGE▼] key)
(7) (10)
(11)
(12)
W. Temp
Speed
(8)
Adjust
Disappears
in a given
Turn
To adjust gain, use the following GAIN knob:
1 screen: GAIN-R knob
2 screens:GAIN-R knob for the right screen, GAIN-L knob for the left
3/4 screens:GAIN-R knob for the 2 right screens, GAIN-L knob for 2 left.
Use GAIN-R knob for the middle screen, in case of 3 screens.
Turn
Push
To switch adjust
time
Push
Push
Push
Setting range is
displayed
*Not valid during Auto Range.
*In case the same range for all screens
Setting shift is
displayed
Shift setting
turns to zero
*Not valid during Auto Shift.
*In case the same range for all screens
Disappears in
a given time.
Disappears in
a given time
Function depends on setting by [F1 key setting]
Push
High
Long push [F1] or [F2] key
to select function to assign
Push
Push
*Either operation
is possible
[F2 key setting]
can be done
similarly
Push
Returns to
the preset
value
Push
Function depends on setting by [EVENT key setting]
*Navigation data (eg. GPS) is
[Store Position]
required.
To save waypoint
Push
Power ON
Push
Adjust Brightness ([BRILL] key)
Push
Keep pressed longer than 3 seconds
Panel Brill
Push
Push
[Store Image]
Push
Echo Adjust
TVG
Push
Push
Disp. Setup2
Alarm2
NAV
Image
*To open menu list, or sub-menu list
To save image of echo sounder
IR
Color Erase
Dynamic Range HF1 24
Dynamic Range HF2 24
Dynamic Range LF1 24
Dynamic Range LF2
Background Color
High
Push
*To close the
menu list
1 7ZPNA4633
Page 2
●
●
●
●To operate menu
Push
10 m
10.0
Push
Push to close
menu list
Push
to open
menu list
Select
menu
name
Select
items
to set
Change
settings
x1: Back to setting items
x2: Back to menu name
Push to close
menu list
To change contents of CM (Condition Memory) keys
One set of the setting values can be switched by using CM keys.
Some setting items are in common use, such as language selection, types of Transducers, etc.
Swithing by CM1 to CM6 keys makes it possible to use functions as if you were using 6 different echo
sounders.
You can switch the settings simply by pushing buttons, among the preferred values saved for different fish
types, seasons, fishing points.
Push to switch to
the setting values in
CM currently in
use is lit red.
Push the CM button to recall the preferred settings.
each CM button.
To change zoom range and shift position of partial zoom
To change the zoom screen range to your preference.
Push
Zoom icon of
header turns to
enlarge.
Setting range is
Push
To change the shift position of partial zoom screen.
displayed.
Disappears in a given time.
Disappears in a given time.
Setting shift is
Push
displayed.
To change contens of CM Menu
Settings for screen configuration, adding zoom screen and frequency change can be done in the CM menu to
your preference.
Move the green
Push
cursor onto the
item to change.
Push
Push to close
CM menu
Frequency
75.0
Push the red-lit
CM button.
Next change can be repeated.
2 7ZPNA4633
Loading...