Jonsered GT 2128 Operator's Manual
Operator’s manual
Manual d’utilisation
Manual de instrucciones
GB (2-20)
FR (21-40)
ES (41-60)
Please read these instructions and make sure you understand them before using the machine.
Lire attentivement et bien assimiler le manuel d’utilisation avant d’utiliser la machine.
Lea detenidamente el manual de instrucciones y asegúrese de entender su contenido antes de utilizar la máquina.
E n g l i s h --- 2
115300326 Rev. 2 7/15/10
SYMBOL EXPLANATION
Only intended for trimmerheads.
Noise emission to the
environment according to the
European Community’s
Directive. The machine’s
emission is specified in the
T echnical data section and
on label.
Sound pressure level at
7,5 metres
Use unleaded or quality leaded
gasoline and two--stroke oil
mixed at a ratio of 2% (1:50).
Other symbols/decals on the machine
refer to special certification requirements
for certain markets.
Stop the engine by pushing
and holding the stop switch
in the STOP position. CAUTION!
The stop switch automatically
returns to the start position.
In order to prevent unintentional
starting, the spark plug cap must be
removed from the spark plug when
assembling, checking and/or
performing maintenance.
Regular cleaning is required.
Visual check.
Approved eyeprotection must
always be used.
Symbols
WARNING: Clearingsaws, brush-
cutters an dtrimmers can be dangerous! Careless or incorrect use
can result inserious or fatal
injury to the operator or others.
Please read the operator’s manual
care fully andmake sure you
understand the instructions
before using the machine.
Always wear:
S A protective helmet where there
is a risk of falling objects
S Hearing protection
S Approved eye protection
Max. speed ofoutput shaft, rpm
Beware of thrown objects and
ricochets.
The operator of themachine
shall ensure, while working,
that no persons or animals
come closer than 15 metres.
Arrows which show limits for
handle mounting.
Always wear approved protective
gloves.
Use anti--slip andstable boots.
Only usenon--metallic, flexible
cutting attachments, i.e. trimmer
heads with trimmerline.
This product is in accordancewith
applicable EC directives.
E n g l i s h --- 3
115300326 Rev. 2 7/15/10
CONTENTS
Contents
KEY TO SYMBOLS
Symbols 2.........................
CONTENTS
Contents 3........................
Note the following before starting 3....
WHAT IS WHAT?
What is what? 4...................
GENERAL SAFETY PRECAUTIONS
Important 5........................
Personal protective equipment 5......
Machine’s safety equipment 6........
Cutting equipment 7.................
ASSEMBLY
Fitting the loop handle 8.............
Fitting the trimmer guardand
trimmer head 8.....................
FUEL HANDLING
Fuel safety 9.......................
Fuel 9............................
Fuelling 10.........................
STARTING AND STOPPING
Check before starting 11..............
Starting and stopping 11..............
WORKING TECHNIQUES
General working instructions 13........
MAINTENANCE
Carburetor 15.......................
Muffler 15..........................
Spark plug 16.......................
Air filter 16..........................
Maintenance schedule 17.............
TECHNICAL DATA
Technical data 18....................
EC--declaration of conformity
(Applies to Europe only) 19............
Note the following before
starting:
Jonsered has a policy of continuous product development andtherefore
reserves the right to modify the design and
appearance of products without prior
notice. Long--term exposure to noise can
result in permanent hearing impairment.
Always use approved hearingprotection.
WARNING: A clearing saw,
brushcutter or trimmer can be
dangerous if used incorrectly or
carelessly, and can cause serious
or fatal injury to the operator or
others. It isextremely important
that you read and understand the
contents of this operator’s manual.
WARNING:Under no circum-
stances may the design of the
machine be modified without the
permission of the manufacturer.
Always use genuine accessories.
Non--authorized modifications
and/or accessories can result
in serious personal injury or the
death of the operator or others.
E n g l i s h --- 4
115300326 Rev. 2 7/15/10
WHAT IS WHAT?
1. Trimmer head 8. Starter handle
2. Cutting attachment guard 9. Fuel tank
3. Shaft 10. Choke control
4. Loop handle 11. Air purge
5. Throttle control 12. Air filter cover
6. Stopswitch 13. Handle adjustment
7. Cylinder cover 14. Operator’s manual
What is what?
3
7
4
1
2
12
1
6
8
11
10
5
9
14
13
E n g l i s h --- 5
115300326 Rev. 2 7/15/10
GENERAL SAFETY PRECAUTIONS
HEARING PROTECTION
Wear hearing protection that provides
adequate noise reduction.
EYE PROTECTION
Always wear approved eye protection. If
you use avisor then you must also wear
approved protective goggles. Approved
protective goggles must comply withEN
166 in EU countries.
GLOVES
Gloves should be worn whennecessary,
e.g., when fitting cutting attachments.
BOOTS
Wear anti--slip and stable boots.
IMPORTANT!Whenever you use a clearing saw, brushcutter or trimmer you must
wear personal protective equipment that is
approved by theauthorities. Personal
protective equipmentdoes noteliminate
the risk of accidents, but it canreducethe
effects of an injury in the event of anaccident. Ask your dealer for help when
choosing protective equipment.
Personal protective equipment
WARNING: Listen out for warn-
ing signals or shouts when you are
wearing hearing protection. Always
remove your hearing protection as
soon as the engine stops.
Important
IMPORTANT! The machine is only designed
for trimming grass.
The only accessories you can operate with
this engine unit are the cutting attachments
we recommend in the chapter on Technical
data.
Never use the machine if you are tired, if you
have drunk alcohol, or if you are taking medication that could affect your vision, your
judgement or your co--ordination.
Wear personal protective equipment. See instructions under the heading Personal
protective equipment.
Never use a machine that has been modified
in any way from its original specification.
Never use a machine that is faulty. Carry out
the checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried
out by trained and qualified specialists. See
instructions under the heading Maintenance.
All covers and guards must be fitted before
starting. Make sure the spark plug cap and
lead are not damaged. Otherwise you could
get an electric shock.
The machine operator must ensure that no
people or animals come closer than 15
metres while working. When several operators are working in the same area, the safety
distance should be at least 15 metres.
WARNING: Never allow children
to use or be in the vicinity of the
machine. As the machine is equipped
with a spring--loaded stop switch and
can be started by low speed and
force on the starter handle, even
small children under some circumstances can produce the force necessary to start the machine. This can
mean a risk of serious personal injury. Therefore remove the spark plug
cap when the machine is not under
close supervision.
WARNING: This machine pro-
duces an electromagnetic field
during operation. Under some circumstances, this field may interfere
with active or passive medical
implants. To reduce the risk of
serious or fatal injury, we recommend persons with medical
implants to consult their physician
and the medical implant manufacturer before operating this machine.
E n g l i s h --- 6
115300326 Rev. 2 7/15/10
GENERAL SAFETY PRECAUTIONS
Muffler
The muffler is designedto reduce the noise
level and to direct the exhaust gases away
from the operator.
CAUTION! Muffler is fitted with a catalytic
convertic designed to reduce harmful exhaust gases.
Stop switch
Make sure theengine stops when you push
and hold the stop switch.
Machine’s safety equipment
This section describes the machine’s safety equipment, its purpose, and how checks
and maintenance shouldbe carried out to
ensure that it operates correctly. See the
“What is what” section to locate wherethis
equipment is positionedon your machine.
The life span of the machinecan bereduced and the risk of accidents can increase if machine maintenance is not carried out correctly and if service and/or repairs are not carried out professionally. If
you need further information please contact
your nearest service workshop.
WARNING: Never use a machine
that has faulty safety equipment!
Follow the control, maintenance
and service instructions described
in this section.
IMPORTANT! All servicing and repair work
on the machine requires special training. This
is especially true of the machine’s safety
equipment. If your machine fails any of the
checks described below you must contact
your service agent. When you buy any of our
products we guarantee the availability of professional repairs and service. If theretailer
who sells your machine is not a servicing
dealer, ask him for the address of your nearest service agent.
Check thatthe guardis undamagedand not
cracked. Replace the guard if it has been
exposed to impact or is cracked. Always use
the recommended guard for the cutting attachment you areusing. See the “Technical
data” section.
Use of incorrectly wound trimmerline or an
incorrect cutting attachment increases the
level of vibration.
Cutting attachment guard
This guard is intended toprevent loose
objects frombeing thrown towards the
operator. The guard also protects the
operator from accidental contact withthe
cutting attachment.
WARNING: Never use a cutting
attachment without an approved
guard. See the section on “T echnical
data”. If an incorrect or faulty guard
is fitted this can cause serious
personal injury.
WARNING: Overexposure to
vibration can lead to circulatory
damage or nerve dama ge in people
who have impaired circulation.
Contact your doctor if you experience symptoms of ov erexposure to
vibration. Such symptoms include
numbness, loss of fee ling, tingling,
pricking, pain, loss of strength,
changes in skin co lor or condition.
These symptoms normally appear
in the fingers, hands or wrists. The
risk increases at low temperatures.
CLOTHING
Wear clothes made ofa strong fabric and
avoid loose clothing that can catch on
shrubs and branches. Always wear heavy,
long pants. Do not wear jewelry, shorts
sandals or gobarefoot. Secure hair so it is
above shoulder level.
FIRST AID KIT
A first aidkit should be carried by operators of clearing saws, brushcutters or trimmers.
Loading...