Johnson Controls A25 Series Data Sheet

A25 Series
Action on Increase
of Temperature
Y
B
R
a25.eps
A25 Series Action Diagram
A25AP-1 Warm Air
Limit Control
A25AN-1 Warm Air
Limit Control
Single-Stage Electromechanical Temperature Controls
A25 Series Warm Air Limit Control with Manual Reset
Description
The A25 Warm Air Control Locks out on a temperature increase to the control setpoint. Manual reset is required before the electrical contacts can be reclosed.
The A25 Control is normally located in a return air duct and is wired to shut down air conditioning or ventilating fans when the temperature of the air becomes excessively hot.
Refer to the A25 Series Warm Air
Control with Manual Reset
Product Bulletin (LIT-125118) for
important product application information.
Applications
Use for high temperature cut-out.
Features
• trip-free reset lever does not permit restarting until the reset lever is manually released
• the rod and tube type sensing element provides positive control action
Repair Information
If the A25 Series Warm Air Limit Control with Manual Reset fails to operate within its specifications, replace the unit. For a replacement control, contact the nearest Johnson
Controls®
representative.
Code No. LIT-1927105
Technical Specifications
The maximum element temperature is 300°F (149°C).
Electrical Ratings
Motor Ratings VAC 120 208 240 277
AC Full Load A 16.0 9.2 8.0 AC Locked Rotor A 96.0 55.2 48.0 Non-Inductive A 16.0 A at 120/277 VAC Pilot Duty 125 VA, 24 to 600 VAC
Selection Chart
Product Code Number
A25AN-1C Single-Pole,
A25CN-1C Single-Pole,
A25AP-1C SPST
A25CP-1C SPDT 25 to 215
The performance specifications are nomina l and con form to accep table ind ustry stand ards. For applicati ons at con ditions be yond these specification s, consult th Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2015 Johnson Controls, Inc.
Switch Action
Single-Throw (SPST), Open high
Double-Throw (SPDT)
Range °F (°C)
25 to 215 (-4 to 102)
25 to 215 (-4 to 102)
Range Adjuster
Knob High limit
Knob High limit
Factory Mutual Approved Models
Open high
25 to 215 (-4 to 102)
(-4 to 102)
Concealed screwdriver slot
Concealed screwdriver slot
Dial Stop °F (°C)
set at 125 (52)
set at 125 (52)
High limit set at 125 (52)
High limit set at 125 (52)
R-39
Loading...