Johnson Controls A19EAF-1C Data Sheet

A19EAF Thermostat

Single-Stage Electromechanical Temperature Controls

A19 Flange Mounted Duct Thermostat

Description

The A19 Flange Mounted Duct Thermostat is
a wide-range temperature control with a
special air coil sensing element and an
adjustable mounting flange.

Refer to the A19 Series Hot Water Heating

Controls Well Immersion Product Bulletin

(LIT-125025) for important product application

information.

Features

• single-pole, double-throw (SPDT)
snap-action switch

• unaffected by barometric pressure or
cross-ambient temperatures

• flat flange mounting with the coil element
permits positioning the sensing bulb in the
appropriate portion of the air stream

Selection Charts

A19 Flange Mounted Duct Thermostat

Product Code
Number

A19EAF-1C SPDT 60 to 130 (16 to 54) 2 (1.1) 200 (93)
A19EAF-2C SPDT 30 to 110 (-1 to 43) 2 (1.1) 140 (60)

Replacement Parts

Product Code Number Description

CVR28A-618R Visible scale cover

Switch
Action

Range
°F (°C)

Applications

These duct thermostats are used on rooftop
units, make-up heaters, duct heaters, and air
handling systems of all types.

Technical Specifications

Electrical Ratings

Motor Ratings VAC 120 208 240

AC Full Load A 6.0 3.4 3.0
AC Locked Rotor A 36.0 20.4 18.0
Non-Inductive 10 A, 120 to 277 VAC
Pilot Duty 125 VA, 24 to 277 VAC

Differential
F° (C°)

Maximum Bulb
Temperature °F (°C)

Code No. LIT-1927070

The performance specifications are nomina l and con form to accep table ind ustry stand ards. For applicati ons at con ditions be yond these specification s, consult th
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2015 Johnson Controls, Inc.

R-31