John Deere CTS Parts Catalog

H42552 -UN-10NOV94

1A2

CTS COMBINE (NORTH AMERICAN VERSION)

JOHN DEERE CTS COMBINE WITH 900 SERIES PLATFORM

JOHN DEERE CTS (RICE) COMBINE SERIAL NO. (645501- )

JOHN DEERE CTS (SMALL GRAIN) COMBINE SERIAL NO. (660401- )

(SPECIFICATIONS AND DESIGN SUBJECT TO CHANGE WITHOUT NOTICE)

CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (02-JUN-98) 10-1

PN=1

1A3

CTS COMBINE (NORTH AMERICAN VERSION)

NOTE

FOR 900 SERIES PLATFORM PARTS INFORMATION, REFER TO JOHN DEERE 900 SERIES PLATFORM PARTS CATALOG - PC-2104.

FOR 40 SERIES CORN HEAD PARTS INFORMATION, REFER TO JOHN DEERE 40 SERIES CORN HEAD PARTS CATALOG - PC-1223.

FOR 50A SERIES ROW-CROP HEAD PARTS INFORMATION, REFER TO JOHN DEERE 50A SERIES ROW-CROP HEAD PARTS CATALOG - PC-1747.

FOR THREE-ROLLER BELT PICKUP PARTS INFORMATION, REFER TO JOHN DEERE THREE-ROLLER BELT PICKUP PARTS CATALOG - PC-2210.

FOR 918 AND 920 DRAPER PARTS INFORMATION, REFER TO JOHN DEERE 918 AND 920 DRAPER PLATFORMS PARTS CATALOG - PC-2212.

FOR 90 SERIES CORN HEAD PARTS INFORMATION, REFER TO JOHN DEERE 90 SERIES CORN HEAD PARTS CATALOG - PC-2404.

IMPORTANT

THIS PARTS CATALOG CONTAINS PARTS INFORMATION FOR THE CTS COMBINE. VINTAGE IS DETERMINED BY THE COMBINE SERIAL NUMBER OR THE PRODUCT INDENTIFICATION NUMBER (PIN). IT IS IMPORTANT THAT THE CORRECT NUMBERS BE USED WHEN ORDERING PARTS.

10-2 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (25-FEB-97)

PN=2

1A4

CTS COMBINE (NORTH AMERICAN VERSION)

PRODUCT INFORMATION NUMBER (PIN) PLATE

THE PRODUCT IDENTIFICATION PLATE (PIN) IS LOCATED NEAR THE RIGHT HAND SIDE OF THE TOOL BOX.

AN EXAMPLE OF THE TWO-LINES ON THIS PIN PLATE IS:

HO0CTSX640101

COMBINE

(FIRST LINE) HO - MANUFACTURING UNIT (HARVESTER WORKS) 0CTS - MODEL IDENTIFIER X - CONFIGURATION CODE/MODELIDENTIFIER SUFFIX 640101 - SEQUENTIAL NUMBER USED IN SERIAL NO. COLUMN

(SECOND LINE)

COMBINE - TYPE OF PRODUCT

CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (17-DEC-99) 10-3

PN=3

1A5

CTS COMBINE (NORTH AMERICAN VERSION)

PARTS LISTING INFORMATION SERIAL NUMBER OR PRODUCT IDENTIFICATION NUMBER (PIN) INFORMATION SHOWS ON WHICH MACHINES PART MAY BE USED; FOR EXAMPLE:

- THE PART CAN BE USED ON ALL MACHINES.

-000000 THE PART CAN BE USED ON ALL MACHINES UP TO AND INCLUDING THE SERIAL NUMBER LISTED. 000000- THE PART CAN BE USED ON ALL MACHINES BEGINNING WITH THE SERIAL NUMBER LISTED. 000000-000000 THE PART CAN BE USED ON ALL MACHINES BETWEEN AND INCLUDING SERIAL NUMBERS LISTED.

WHEN XXXXXX’S ARE LISTED IN PLACE OF A SERIAL NUMBER, A SERIAL NUMBER CHANGE WAS MADE, BUT THE EXACT SERIAL NUMBER IS NOT AVAILABLE WHEN THE CATALOG WAS PRINTED.

SHORT BLOCK SERIAL NUMBER PLATE

( -RGSB076882500)

RGP3513 -UN-01JAN94

THE REPLACEMENT SHORT BLOCK ASSEMBLY HAS A SERIAL NUMBER PLATE ATTACHED. THE ORIGINAL ENGINE SERIAL NUMBER MUST BE STAMPED ONTO THE NEW PLATE IN THE BLANK SPACE PROVIDED, AS A REFERENCE FOR YOUR DEALER. THE PLATE CAN BE ATTACHED WITH (2) 37H44 DRIVE SCREWS.

1. DESIGNATES ENGINE MANUFACTURER RG - WATERLOO ENGINE WORKS

2. DESIGNATES REPLACEMENT SHORT BLOCK SB

3. DESIGNATES LITERS XXX- 076 (7.6)

4. DESIGNATES THE PRODUCTION DATE 8825

5. DESIGNATES COMPONENT SEQUENCE 00

10-4 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (25-FEB-97)

PN=4

(RE603860295- )

RGP4460 -UN-04MAR95

1A6

CTS COMBINE (NORTH AMERICAN VERSION)

SHORT BLOCK SERIAL NUMBER IDENTIFICATION

SERIAL NUMBER STAMPED INTO CASTING OF BLOCK NEAR PREVIOUS SERIAL NUMBER PLATE. EXAMPLE: RE603860295

1. DESIGNATES SERVICE PART NUMBER RE60386

2. DESIGNATES MONTH ASSEMBLED 02

3. DESIGNATES YEAR ASSEMBLED 95

CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (25-FEB-97) 10-5

PN=5

RGP3513 -UN-01JAN94

1A7

CTS COMBINE (NORTH AMERICAN VERSION)

TWO LINE BAR CODED ENGINE SERIAL NUMBER PLATE

(LOCATED ON FUEL INJECTION PUMP SIDE OF ENGINE)

FIRST LINE DEFINES

RG - WATERLOO ENGINE WORKS DESIGNATES ENGINE MANUFACTURER. 6 DESIGNATES NUMBER OF CYLINDERS. 076 (7.6 LITERS) DESIGNATES LITER DISPLACEMENT. H - AIR-TO-AIR XXXXXX DESIGNATES ENGINE SERIAL NUMBER.

SECOND LINE

6076 CTS

ADDITIONAL ENGINE INFORMATION

ENGINE MODEL ENGINE SERIAL NO. 6076HH030 (260 HP) ( -565536)

6076HH034 (260 HP) (565537- )

10-6 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (25-FEB-97)

PN=6

1A8

CTS COMBINE (NORTH AMERICAN VERSION)

DIRECTION ARROW

ARROWS ARE USED WITH ILLUSTRATIONS TO INDICATE THE FRONT OF THE UNIT. "RIGHT-HAND" AND "LEFTHAND" SIDES ARE DETERMINED BY FACING IN THE DIRECTION OF MACHINE FORWARD TRAVEL.

BOX-ENCLOSED ILLUSTRATIONS

A KEY NUMBER, SHOWN IN THE PARTS LIST, IS ASSIGNED TO A BOX ENCLOSING ALL PARTS SOLD AS A SERVICE ASSEMBLY. A BOX NOT KEYED INCLUDES NON-CURRENT PARTS.

KITS

KIT INFORMATION WILL BE FOUND IMMEDIATELY FOLLOWING THE STORY IN WHICH IT IS USED.THE ILLUSTRATION IS REPEATED WITH ONLY THE KIT PARTS CALLED OUTAND WITH ALL OTH ER PARTS SHOWN IN PHANTOM.

JDM REMANUFACTURED COMPONENTS

THE SERVICE PARTS LISTED IN THIS CATALOG ARE INTENDED FOR THE REPAIR OF ORIGINAL EQUIPMENT COMPONENTS. ALTHOUGH MOST SERVICE PARTS MAY BE USED TO REPAIR REMANUFACTURED COMPONENTS, THE REMANUFACTURED DESIGN MAY CHANGE PARTS SUFFICIENTLY SO THAT SERVICE PARTS ARE INADEQUATE OR NOT USABLE.

BOLT AND CAP SCREW STRENGTH IDENTIFICATION

BOLTS AND CAP SCREWS REQUIRED TO HAVE HIGH-STRENGTH QUALITIES EQUIVALENT TO SAE GRADE 8 ARE IDENTIFIED THROUGHOUT THIS CATALOG BY THE DESCRIPTION HS SAE 8. ALL STANDARD BOLTS AND CAP SCREWS ARE SAE GRADE 5 OR LOWER. BOLTS AND CAP SCREWS REQUIRED TO HAVE HIGH-STRENGTH QUALITIES EQUIVALENT TO PROPERTY CLASS 10.9 ARE IDENTIFIED THROUGHOUT THIS CATALOG BY THE DESCRIPTION HS 10.9. ALL STANDARD BOLTS AND CAP SCREWS ARE PROPERTY CLASS.

8.8 OR LOWER.

SI UNITS OF MEASURE

METRIC DIMENSIONS ARE GIVEN, WHERE APPLICABLE, THROUGHOUT THIS PARTS CATALOG.

CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (25-FEB-97) 10-7

PN=7

1A9

CTS COMBINE (NORTH AMERICAN VERSION)

TRADEMARKS

THROUGHOUT THIS PARTS CATALOG, YOU WILL FIND THE FOLLOWING DEERE & COMPANY TRADEMARKS: DIAL-A-SPEED™ POSI-TORQ™

DIAL-A-MATIC™ TORQ-GARD SUPREME® HARVESTRAK™ QUIK-TATCH™

CONTOUR MASTER™

CHANGE INDICATOR LINE

CHANGES AFFECTING THE ORDERING OF PARTS ARE IDENTIFIED BY VERTICAL LINES MARKED IN THE LEFT-HAND MARGIN OF REVISED PARTS LISTING IMAGES. A LINE IS ALSO AT THE LEFT-HAND EDGE OF THE SAME PART NUMBER IN THE NUMERICAL INDEX TO SHOW THE LOCATION OF REVISED INFORMATION.

FUNCTION CODE (EXAMPLE - FC: 5000)

FUNCTION CODES ARE LOCATED ON EACH PAGE IN THE UPPER RIGHT-HAND CORNER IN THE BOX. THE CODE LISTED IS A GROUPING CODE THAT CAN BE USED FOR WARRANTIES AND FOR DTAC TO IDENTIFY CERTAIN AREAS.

COMPLETE GOODS LISTINGS

COMPLETE GOODS ARE IN BOLD FACE TYPE. ORDER SEPARATELY. DO NOT INCLUDE ON REPLACEMENT PARTS ORDER.

FOR INDIVIDUAL HEADER PARTS CATALOGS REFER TO:

PC-2104 - PARTS CATALOG FOR JOHN DEERE 900 SERIES PLATFORMS

PC-2210 - PARTS CATALOG FOR JOHN DEERE THREE ROLLER BELT PICK-UP

PC-2212 - PARTS CATALOG FOR JOHN DEERE 918 DRAPER PLATFORMS

PC-1747 - PARTS CATALOG FOR JOHN DEERE 50A SERIES ROW-CROP HEADS

PC-1223 - PARTS CATALOG FOR JOHN DEERE 40 SERIES CORN HEADS

PC2404 - PARTS CATALOG FOR JOHN DEERE 90 SERIES CORN HEADS

10-8 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (17-DEC-99)

PN=8

1A10

SECTION INDEX

SECTION 10 - GENERAL INFORMATION SECTION 20 - ENGINE FAN, INTERCOOLER AND SCREENS SECTION 26 - 6076 ENGINE (HH030) SECTION 30 - FUEL AND AIR SECTION 40 - ELECTRICAL SECTION 50 - POWER TRAIN SECTION 60 - STEERING AND BRAKES SECTION 70 - HYDRAULICS SECTION 80 - SEPARATOR SHELL

CTS COMBINE (NORTH AMERICAN VERSION)

SECTION 90 - OPERATOR’S STATION SECTION 110 - FEEDER HOUSE SECTION 120 - THRESHING AND SEPARATION SECTION 121 - DRIVES SECTION 125 - RESIDUE DISPOSAL SECTION 130 - CLEAN GRAIN ELEVATOR, GRAIN TANK AND UNLOADING AUGER SECTION 160 - DIAL-A-MATIC HEADER HEIGHT CONTROL SECTION 170 - DECALS, BELTS AND CHAINS SECTION 180 - NUMERICAL INDEX

CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (17-DEC-99) 10-9

PN=9

1A11

CTS COMBINE (NORTH AMERICAN VERSION)

ALPHABETICAL INDEX

GRID PAGE GRID PAGE

A 4D14 AIR SEAT SUSPENSION KITS

(665401- ) ................................................................ 90 - 56

4E21 A/C COMPRESSOR 4D16 AIR SEAT SUSPENSION KITS

(650401- ) R134A .................................................. 90 - 90 (665401- ) ................................................................ 90 - 58

4E22 A/C COMPRESSOR COVER 4D18 AIR SEAT SUSPENSION KITS

(650401- ) R134A .................................................. 90 - 91 (665401- ) ................................................................ 90 - 60

4E21 A/C COMPRESSOR DIODE 2C5 AIR SEAT WIRING HARNESS

(650401- ) R134A .................................................. 90 - 90 (660401- ) .............................................................. 40 - 20

4E21 A/C COMPRESSOR MANIFOLD 4D12 AIR SUSPENSION KITS, SEAT

(650401- ) R134A .................................................. 90 - 90 (665401- ) .............................................................. 90 - 54

4E22 A/C COMPRESSOR PULLEY 4D14 AIR SUSPENSION KITS, SEAT

(650401- ) R134A .................................................. 90 - 91 (665401- ) .............................................................. 90 - 56

4E21 A/C COMPRESSOR SEAL 4D16 AIR SUSPENSION KITS, SEAT

(650401- ) R134A .................................................. 90 - 90 (665401- ) .............................................................. 90 - 58

4E24 A/C COMPRESSOR SEAL KIT 4D18 AIR SUSPENSION KITS, SEAT

(650401- ) R134A ................................................ 90 - 93 (665401- ) .............................................................. 90 - 60

1B22 A/C CONDENSER ............................................................ 20 - 16 4D10 AIR SUSPENSION, SEAT

3H1 A/C CONDENSER AND OIL COOLER............................ 70 - 96 (660401- ) ................................................................ 90 - 52

3I9 ACCESS DOOR, REAR HOOD AND STOP .................. 80 - 26 1E23 ALTERNATOR ADJUSTING STRAP................................ 26 - 76

3H23 ACCESS PLATFORM AND STEP, ENGINE .................. 80 - 16 2E1 ALTERNATOR AND VOLTAGE REGULATOR (95 AMP

3J1 ACCESS SHIELD, SERVICE, L.H. .................................. 80 - 42 ), BOSCH ...................................................................... 40 - 64

3I23 ACCESS SHIELD, SERVICE, R.H. .................................. 80 - 40 2E3 ALTERNATOR MOUNTING .............................................. 40 - 66

3E21 ACCUMULATOR AND MOUNTING, ONE GALLON 1E23 ALTERNATOR SUPPORT STRAP .................................. 26 - 76

(655401- ) .............................................................. 70 - 40 2D24 ALTERNATOR, SHEAVE AND BELT - BOSCH.............. 40 - 63

3E17 ACCUMULATOR AND MOUNTING, ONE HALF 2C17 ANTENNA, SPEAKERS AND RADIO.............................. 40 - 32

GALLON, SINGLE........................................................ 70 - 36 5G15 ARM, LOCKOUT, DUAL-RANGE .................................... 121 -38

3D7 ACCUMULATOR PRESSURE GAUGE AND WIRING 3I3 ARM, REAR LADDER LANDING LATCH ........................ 80 - 20

HARNESS .................................................................... 70 - 2 2I6 ARM, STEERING .............................................................. 50 - 52

3E19 ACCUMULATOR, ONE-HALF GALLON DUAL AND 1E19 ARMATURE (DENSO) (12V F4) ...................................... 26 - 72

MOUNTING ( -655400) ........................................ 70 - 38 3F18 ARMATURE, SOLENOID CONTROL VALVE KIT FOR

4D6 ADJUST FORE-AND-AFT, SEAT .................................... 90 - 48 AUGER SWING ............................................................ 70 - 62

3C16 ADJUSTABLE REAR AXLE.............................................. 60 - 33 4D24 ARMREST (L.H.) .............................................................. 90 - 66

3C19 ADJUSTABLE REAR AXLE STEERING TIE RODS ...... 60 - 36 4D22 ARMREST ADJUSTING MECHANISM, (R.H.) ................ 90 - 64

4D8 ADJUSTER, CAB SEAT HEIGHT .................................... 90 - 50 2B24 ARMREST CONTROL PANEL ........................................ 40 - 14

5G23 ADJUSTING BRACKET, CYLINDER DRIVE, 2B22 ARMREST WIRING HARNESS ........................................ 40 - 12

DUAL-RANGE .............................................................. 121 -46 4D20 ARMREST WITH GLOVE BOX (R.H.) ............................ 90 - 62

1F12 AIR CLEANER AND INTAKE TUBES.............................. 30 - 12 5D13 ARMS, FRAME, PRECLEANER CHAFFER .................... 120 -56

2C9 AIR CONDITIONER AND HEATER SWITCH.................. 40 - 24 1D3 ARMS, ROCKER .............................................................. 26 - 26

2C7 AIR CONDITIONER PRESSURIZER FAN KIT 1C9 ASSEMBLY, COMPLETE BLOCK

(640401-650400) .......................................................... 40 - 22 (ESN 500000- )...................................................... 26 - 6

2C5 AIR CONDITIONER WIRING HARNESS 2H11 ASSEMBLY, HYDROSTATIC DRIVE PISTON ................ 50 - 32

(660401- ) .............................................................. 40 - 20 3G1 ASSEMBLY, SIX STACK SOLENOID CONTROL

2C3 AIR CONDITIONER, HEATER WIRING HARNESS VALVE (660401- ) ................................................ 70 - 72

( -660400) .............................................................. 40 - 18 3B23 ATTENUATOR,UPPER, HYDRAULIC STEERING

4C16 AIR CONDITIONING AND HEATER DUCTS .................. 90 - 33 HOSES .......................................................................... 60 - 16

4E6 AIR CONDITIONING AND HEATER HOUSING 6H18 AUGER BELTS ................................................................ 170 -2

FILTERS........................................................................ 90 - 74 6E2 AUGER CHAIN TIGHTENER, LOWER TAILINGS .......... 125 -70

4E16 AIR CONDITIONING COMPRESSOR 5C19 AUGER CLEANOUT DOOR, SHOE GRAIN SUPPLY,

( -650400) R-12 .................................................... 90 - 84 HANDLES AND LATCHES .......................................... 120 -36

4E10 AIR CONDITIONING SYSTEM ........................................ 90 - 78 6E8 AUGER DRIVE SHIELD, UPPER TAILINGS .................. 125 -76

4E12 AIR CONDITIONING SYSTEM, COMPRESSOR 6E10 AUGER DRIVE SHIELD, UPPER TAILINGS .................. 125 -78

( -650400) R-12 .................................................... 90 - 80 3I17 AUGER DRIVE SHIELDS (R-H SIDE) ............................ 80 - 34

4E14 AIR CONDITIONING SYSTEM, COMPRESSOR 6E4 AUGER DRIVE TIGHTENER, LOWER TAILINGS .......... 125 -72

(650401- ) R134A .................................................. 90 - 82 6E8 AUGER DRIVE, UPPER TAILINGS ................................ 125 -76

4E8 AIR CONDITIONING/HEATER AND PRESSURIZER 6E10 AUGER DRIVE, UPPER TAILINGS ................................ 125 -78

FAN .............................................................................. 90 - 76 6F9 AUGER HOUSING, LOADING, UPPER CLEAN

3H21 AIR DEFLECTOR, AIR DUCT, ENGINE COMPARTM GRAIN .......................................................................... 130 -12

ENT .............................................................................. 80 - 14 6F11 AUGER HOUSING, LOADING, UPPER CLEAN

3H21 AIR DUCT AND AIR DEFLECTOR, ENGINE COMPA GRAIN (660401- ).................................................. 130 -14

RTMENT ...................................................................... 80 - 14 2D21 AUGER LIGHT, UNLOADING, GRAIN TANK.................. 40 - 60

4C15 AIR FILTER AND HOUSING, CAB .................................. 90 - 32 6G5 AUGER LOWER GEAR CASE, VERTICAL .................... 130 -34

1B22 AIR INTERCOOLER.......................................................... 20 - 16 2D7 AUGER SENSOR AND WIRING HARNESS,

4D10 AIR SEAT SUSPENSION UNLOADING (660401- )........................................ 40 - 46

(660401- ) ................................................................ 90 - 52 3F17 AUGER SWING SOLENOID CONTROL VALVE ............ 70 - 61

4D12 AIR SEAT SUSPENSION KITS 3F18 AUGER SWING, ARMATURE, SOLENOID CONTROL

(665401- ) ................................................................ 90 - 54 VALVE KIT .................................................................... 70 - 62

10-10 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00)

PN=10

1A12

CTS COMBINE (NORTH AMERICAN VERSION)

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

3F16 AUGER SWING, SOLENOID CONTROL VALVE 1C20 BEARINGS, MAIN (6076) ................................................ 26 - 17

DOUBLE PILOTED ...................................................... 70 - 60 2H21 BEARINGS, SEALS, SHAFT AND OUTER COVER

3G11 AUGER SWING, UNLOADING, CYLINDER AND CAM LOBE MOTOR .................................................... 50 - 42

MOUNTING .................................................................. 70 - 82 2G18 BEARINGS, TRANSMISSION INPUT SHAFT ................ 50 - 14

3G13 AUGER SWING, UNLOADING, CYLINDER AND 2G20 BEARINGS, TRANSMISSION PINION SHAFT................ 50 - 16

MOUNTING (650401-655551) ...................................... 70 - 84 6H21 BEATER BELTS SHEAVES ............................................ 170 -5

6G11 AUGER SWIVEL SUPPORT AND BRACES .................. 130 -40 5C17 BEATER COVER .............................................................. 120 -34

6G9 AUGER SWIVEL, HORIZONTAL UNLOADING .............. 130 -38 5C11 BEATER DRIVE BELT IDLER.......................................... 120 -28

6F9 AUGER TRANSITION HOUSING .................................... 130 -12 5C13 BEATER DRIVE CONVERSION, DUAL SPEED

6D21 AUGER TROUGH, LOWER TAILINGS............................ 125 -64 700/400 RPM ................................................................ 120 -30

2D7 AUGER WIRING HARNESS, UNLOADING 5C15 BEATER GEARCASE AND SHEAVE .............................. 120 -32

(660401- ) .............................................................. 40 - 46 5C9 BEATER SHAFT AND DRIVE BELT................................ 120 -26

6E23 AUGER, CLEAN GRAIN LOWER AND HINGED DOOR 130 -2 5C7 BEATER, STRIPPER ........................................................ 120 -24

6H3 AUGER, CROSS, COVERS AND CHANNEL.................. 130 -56 5C5 BEATER, STRIPPER, DRIVE IDLER .............................. 120 -22

6G22 AUGER, HORIZONTAL UNLOADING 6H6 BELT GUIDE, UNLOADING AUGER DRIVE .................. 130 -60

(17- AND 20-FT.) .......................................................... 130 -50 5H17 BELT PICKUP/REEL CHARGE PUMP MOUNTING

6G15 AUGER, HORIZONTAL UNLOADING, DRIVE AND SHEAVE .............................................................. 121 -64

GEARCASE .................................................................. 130 -44 4H11 BELT, FAN, DUST, LH SIDE FEEDER

6G13 AUGER, HORIZONTAL UNLOADING, HUB SUPPORT HOUSE-RETROFIT INSTALLATION............................ 110 -54

AND SWITCH .............................................................. 130 -42 4D3 BELT, OPERATOR’S SEAT ............................................ 90 - 44

6F13 AUGER, LOADING, CLEAN GRAIN ................................ 130 -16 4D4 BELT, SEAT - PASSENGER SEAT ................................ 90 - 45

6F15 AUGER, LOADING, CLEAN GRAIN FOLD 4D5 BELT, SEAT - RETROFIT KIT

(660401- ) ............................................................ 130 -18 (MACHINES PRIOR TO 1996 MODEL YEAR) .......... 90 - 46

6H19 AUGER, LOWER TAILINGS, BELTS .............................. 170 -3 6H19 BELTS, AIR CONDITIONER COMPRESSOR ................ 170 -3

6D19 AUGER, LOWER TAILINGS, SHAFT AND 6H18 BELTS, AUGER ................................................................ 170 -2

TIGHTENER.................................................................. 125 -62 6H21 BELTS, BEATER .............................................................. 170 -5

6H4 AUGER, UNLOADING, COUNTERSHAFT DRIVE .......... 130 -58 6H19 BELTS, CLEAN GRAIN ELEVATOR................................ 170 -3

6H6 AUGER, UNLOADING, DRIVE BELT GUIDE.................. 130 -60 6H18 BELTS, CONVEYOR FEEDER ........................................ 170 -2

6H9 AUGER, UNLOADING, LUBE BANK .............................. 130 -64 6H19 BELTS, COOLING FAN .................................................... 170 -3

6E8 AUGER, UPPER TAILINGS.............................................. 125 -76 6H19 BELTS, CYLINDER DRIVE .............................................. 170 -3

6E10 AUGER, UPPER TAILINGS.............................................. 125 -78 6H19 BELTS, DRIVE, CYLINDER INTERMEDIATE ................ 170 -3

6E6 AUGER, UPPER TAILINGS, HOUSING AND 6H20 BELTS, FAN, CLEANING ................................................ 170 -4

PADDLE ASSEMBLY .................................................. 125 -74 6H18 BELTS, FEEDER CONVEYOR ........................................ 170 -2

6G7 AUGER, VERTICAL UNLOADING AND CHARGE 6H20 BELTS, FEEDER HOUSE ................................................ 170 -4

HOUSING...................................................................... 130 -36 6H20 BELTS, HEADER AND REEL .......................................... 170 -4

6H1 AUGERS, GRAIN TANK CROSS .................................... 130 -54 6H21 BELTS, LOWER TAILINGS AUGER ................................ 170 -5

5C22 AUGERS, SHOE GRAIN SUPPLY AND HOUSING........ 120 -40 6H19 BELTS, LOWER TAINLINGS AUGER ............................ 170 -3

5C20 AUGERS, SUPPLY, SHOE GRAIN AND HOUSING ...... 120 -38 6H19 BELTS, ROTARY SCREEN.............................................. 170 -3

2B14 AUX FIELD LIGHT SWITCH, OPTIONAL ........................ 40 - 4 6H20 BELTS, STRAW CHOPPER ............................................ 170 -4

2B20 AUXILIARY FIELD LIGHTING .......................................... 40 - 10 6H20 BELTS, STRAW SPREADER .......................................... 170 -4

2G9 AXLE SPACERS .............................................................. 50 - 5 6H20 BELTS, UNLOADING AUGERS ...................................... 170 -4

2H2 AXLE, FINAL DRIVE ........................................................ 50 - 23 6H21 BELTS, UNLOADING SYSTEM........................................ 170 -5

3C17 AXLE, FIXED REAR 6H21 BELTS, UPPER TAILINGS AUGER ................................ 170 -5

(GRAIN) (655542- ) .............................................. 60 - 34 6H18 BELTS, WALKER .............................................................. 170 -2

2G8 AXLE, FRONT .................................................................. 50 - 4 1C9 BLOCK ASSEMBLY, COMPLETE

3C16 AXLE, REAR, ADJUSTABLE............................................ 60 - 33 (ESN 500000- )...................................................... 26 - 6

3C23 AXLE, REAR, SPINDLES ................................................ 60 - 40 1C13 BLOCK, SHORT

3C15 AXLE, REAR, SUPPORT.................................................. 60 - 32 (WITH HEAD BOLTS) .................................................. 26 - 10

1C11 BLOCK, SHORT (WITHOUT HEAD BOLTS) .................. 26 - 8

1D1 BOLTS, CYLINDER HEAD (6076) .................................. 26 - 24

B 2E1 BOSCH ALTERNATOR AND VOLTAGE REGULATOR 40

2D24 BOSCH ALTERNATOR, SHEAVE AND BELT ................ 40 - 63

4D1 BACKREST AND SEAT, OPERATOR’S .......................... 90 - 42 4C7 BOX, TOOL

2F10 BACKSHAFT SPEED SENSOR, FEEDER HOUSE ........ 40 - 98 (660401- ) .............................................................. 90 - 24

6H9 BANK, LUBE, UNLOADING AUGER .............................. 130 -64 6G11 BRACES AND SWIVEL SUPPORT, AUGER .................. 130 -40

2D19 BATTERIES, CABLE AND HOLDDOWN ........................ 40 - 58 3B20 BRACKET, BRAKE CABLE SUPPORT

2E19 BEACON LIGHTS, REVOLVING (EXPORT ONLY) ........ 40 - 82 (645510- ) .............................................................. 60 - 13

5E16 BEARING AND LUBE LINES, MODULE FRONT............ 120 -84 2F2 BRACKET, REEL SPEED MOTOR.................................. 40 - 90

2H1 BEARING CAP, FINAL DRIVE ........................................ 50 - 22 5C3 BRACKETS, CONCAVE INDICATOR AND CABLE ........ 120 -20

6G24 BEARING PLATE, CROSS AUGER, L.H......................... 130 -52 2C10 BRACKETS, LOW SHAFT SPEED SENSORS .............. 40 - 25

2I1 BEARING, COVER AND QUILL ...................................... 50 - 47 3F25 BRACKETS, SOLENOID CONTROL VALVE .................. 70 - 70

1C20 BEARING, THRUST (6076) .............................................. 26 - 17 3B20 BRAKE CABLE SUPPORT BRACKET

1D12 BEARING, WATER PUMP................................................ 26 - 38 (645510- ) .............................................................. 60 - 13

6D25 BEARINGS, CHAIN AND SPROCKETS, TAILINGS 3B13 BRAKE LINES, MASTER CYLINDER AND

ELEVATOR CONVEYOR ............................................ 125 -68 RESERVOIR ................................................................ 60 - 6

2H2 BEARINGS, FINAL DRIVE .............................................. 50 - 23 3B15 BRAKE MASTER CYLINDER .......................................... 60 - 8

2H3 BEARINGS, FINAL DRIVE .............................................. 50 - 24 3B9 BRAKE PEDAL AND SEAL, PARKING .......................... 60 - 2

CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00) 10-11

- 64

PN=11

1A13

CTS COMBINE (NORTH AMERICAN VERSION)

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

3B11 BRAKE PEDALS .............................................................. 60 - 4 2E17 CENTRAL ELECTRONICS MODULE AND CIRCUIT

3B17 BRAKE SHOES AND DRUM............................................ 60 - 10 BOARDS ...................................................................... 40 - 80

3B19 BRAKE SLAVE CYLINDER .............................................. 60 - 12 6C20 CHAFF SPREADER (BELT TYPE) FRAME,

2E9 BREAKERS, CIRCUIT, ENGINE COMPARTMENT ........ 40 - 72 SHIELDS AND HANDLES ( -650400).................. 125 -38

2E6 BREAKERS, CIRCUIT, ENGINE COMPARTMENT 6C24 CHAFF SPREADER (BELT TYPE) PAN AND SEALS

( -660400) .............................................................. 40 - 69 ( -650400) .............................................................. 125 -42

2E7 BREAKERS, CIRCUIT, ENGINE COMPARTMENT 6D15 CHAFF SPREADER (DUAL MOTOR) HOSES AND

(660401- ) .............................................................. 40 - 70 LINES (650401- ) .................................................. 125 -58

1C24 BUSHING, CAMSHAFT .................................................... 26 - 21 6D1 CHAFF SPREADER (DUAL MOTOR) PAN, WINGS

1C7 BUSHING, CAMSHAFT (6076) ........................................ 26 - 4 AND SEALS (650401- ) ........................................ 125 -44

1D9 BYPASS VALVE, OIL FILTER.......................................... 26 - 34 6C22 CHAFF SPREADER (DUAL MOTOR) SHIELDS

AND HANDLES (650401- ) .................................... 125 -40

6D5 CHAFF SPREADER CONTROL, CHECK VALVE,

C ROD AND KNOB .......................................................... 125

6C16 CHAFF SPREADER DISC (BELT TYPE)

4C15 CAB AIR FILTER AND HOUSING .................................. 90 - 32 ( -650400) .............................................................. 125 -34

2B11 CAB DOME LIGHT .......................................................... 40 - 1 6C18 CHAFF SPREADER DISC (DUAL MOTOR)

4B20 CAB DOOR AND GLASS ................................................ 90 - 12 (650401- ) .............................................................. 125 -36

4B18 CAB DOOR LATCH .......................................................... 90 - 10 6D13 CHAFF SPREADER HOSES, LINES AND MOTOR

4B22 CAB FRAME AND SUPPORT .......................................... 90 - 14 ( -650400) .............................................................. 125 -56

4F3 CAB HARDWARE KIT ...................................................... 90 - 96 6D9 CHAFF SPREADER LINES AND FITTINGS .................. 125 -52

4B16 CAB INTERIOR TRIM PANELS ...................................... 90 - 8 6D11 CHAFF SPREADER LINES, HOSES, VALVE AND

4C11 CAB L.H. LANDING AND MIRROR PUMP ............................................................................ 125 -54

(650401- ) .............................................................. 90 - 28 3D14 CHAFF SPREADER MOTOR

4C9 CAB LANDING AND MIRROR (L.H.) (EATON) (655929- ) .............................................. 70 - 9

( -650400) .............................................................. 90 - 26 6D3 CHAFF SPREADER MOUNTING SUPPORT .................. 125 -46

4C13 CAB LANDING AND MIRROR (R.H.) .............................. 90 - 30 6D17 CHAFF SPREADER PUMP .............................................. 125 -60

4B10 CAB PANELS AND FLOOR MAT .................................... 90 - 2 5H3 CHAFFER DRIVE, CONVEYOR AUGERS AND SIEVE 121 -50

2B16 CAB POST INSTRUMENT PANEL .................................. 40 - 6 5D15 CHAFFER ELEMENT........................................................ 120 -58

4C17 CAB POST INSTRUMENT PANEL .................................. 90 - 34 5D17 CHAFFER ELEMENT........................................................ 120 -60

4F5 CAB POST INSTRUMENT PANEL LH (EXPORT 5D19 CHAFFER EXTENSION ELEMENT ................................ 120 -62

ONLY) .......................................................................... 90 - 98 5D21 CHAFFER FRAME ............................................................ 120 -64

4B14 CAB REAR AND SIDE SEALS ........................................ 90 - 6 5D13 CHAFFER FRAME ARMS, PRECLEANER .................... 120 -56

4B24 CAB ROOF AND SUPPORTS.......................................... 90 - 16 5D9 CHAFFER FRAME, PRECLEANER ................................ 120 -52

2B18 CAB ROOF LIGHTS ........................................................ 40 - 8 5D5 CHAFFER, PRECLEANING

4D8 CAB SEAT HEIGHT ADJUSTER .................................... 90 - 50 ( -655400) .............................................................. 120 -48

4B12 CAB SOUND DEADENING, FOAM AND SEALS............ 90 - 4 5D7 CHAFFER, PRECLEANING (655401- )...................... 120 -50

2B12 CAB WIRING HARNESS .................................................. 40 - 2 6E2 CHAIN TIGHTENER, LOWER TAILINGS AUGER .......... 125 -70

2G12 CABLE AND SWITCH, HYDROSTATIC DRIVE LEVE 4G16 CHAIN, IDLER SHAFT AND DRUM, FEEDER

R .................................................................................... 50 - 8 CONVEYOR .................................................................. 110 -34

5C3 CABLE, CONCAVE INDICATOR, AND BRACKETS ...... 120 -20 6D25 CHAIN, SPROCKETS AND BEARINGS, TAILINGS

2G14 CABLE, HYDROSTATIC DRIVE CONTROL.................... 50 - 10 ELEVATOR CONVEYOR ............................................ 125 -68

2D19 CABLES, BATTERY.......................................................... 40 - 58 6H3 CHANNEL AND COVERS, CROSS AUGER .................. 130 -56

2H20 CAM LOBE MOTOR ........................................................ 50 - 41 6G7 CHARGE HOUSING, VERTICAL UNLOADING

2I2 CAM, CARRIER AND PISTONS ...................................... 50 - 48 AUGER.......................................................................... 130 -36

2G24 CAM, SHIFTER, TRANSMISSION AND 3F3 CHARGE PRESSURE HOSE .......................................... 70 - 46

DIFFERENTIAL ............................................................ 50 - 20 5H17 CHARGE PUMP MOUNTING AND SHEAVE, REEL/

1C24 CAMSHAFT ...................................................................... 26 - 21 BELT PICKUP .............................................................. 121 -64

1C24 CAMSHAFT BUSHING .................................................... 26 - 21 2H12 CHARGE PUMP, HYDROSTATIC DRIVE ...................... 50 - 33

1C7 CAMSHAFT BUSHING (6076).......................................... 26 - 4 6D5 CHECK VALVE, ROD, KNOB AND CONTROL,

1C24 CAMSHAFT FOLLOWER.................................................. 26 - 21 CHAFF SPREADER .................................................... 125 -48

1D3 CAMSHAFT FOLLOWER.................................................. 26 - 26 6G5 CHUTE, GRAIN TANK CLEAN OUT CHUTE.................. 130 -34

1C24 CAMSHAFT GEAR............................................................ 26 - 21 2B16 CIRCUIT BOARD, COMBINE DATA CENTER ................ 40 - 6

2H1 CAP, BEARING, FINAL DRIVE ........................................ 50 - 22 4C17 CIRCUIT BOARD, COMBINE DATA CENTER................ 90 - 34

6G5 CAP, GRAIN TANK CLEAN OUT CHUTE ...................... 130 -34 2E17 CIRCUIT BOARDS, CENTRAL ELECTRONICS MODU

1C7 CAPS, MAIN BEARING .................................................... 26 - 4 LE .................................................................................. 40 - 80

2I4 CAPS, YOKE AND PIVOTS ............................................ 50 - 50 2E9 CIRCUIT BREAKER RELAYS .......................................... 40 - 72

2I2 CARRIER, PISTONS AND CAM ...................................... 50 - 48 2E6 CIRCUIT BREAKER RELAYS

2J17 CASE DRAIN HYDRAULIC LINES, FOUR WHEEL ( -660400) .............................................................. 40 - 69

DRIVE .......................................................................... 50 - 88 2E7 CIRCUIT BREAKER RELAYS

2B16 CDC (COMBINE DATA CENTER) .................................. 40 - 6 (660401- ) .............................................................. 40 - 70

4C17 CDC (COMBINE DATA CENTER) .................................. 90 - 34 2E9 CIRCUIT BREAKERS, ENGINE COMPARTMENT.......... 40 - 72

1D22 CENTER HOUSING, TURBOCHARGER 2E6 CIRCUIT BREAKERS, ENGINE COMPARTMENT

(AIRESEARCH) ............................................................ 26 - 50 ( -660400) .............................................................. 40 - 69

1D23 CENTER HOUSING, TURBOCHARGER (SCHWITZER) 26 - 51 2E7 CIRCUIT BREAKERS, ENGINE COMPARTMENT

2C23 CENTER, L.H. MAIN WIRING HARNESS ...................... 40 - 38 (660401- ) .............................................................. 40 - 70

-48

10-12 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00)

PN=12

1A14

CTS COMBINE (NORTH AMERICAN VERSION)

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

6F18 CLEAN GRAIN ELEVATOR DRIVE TIGHTENER AND 5B20 CONCAVE, RASP BAR AND GRATE ............................ 120 -12

IDLER ............................................................................ 130 -22 5C1 CONCAVE, SPIKE TOOTH .............................................. 120 -18

6F16 CLEAN GRAIN ELEVATOR GEARCASE AND 5B24 CONCAVE, SPIKE-TOOTH .............................................. 120 -16

SHEAVE ........................................................................ 130 -20 1B22 CONDENSER, A/C............................................................ 20 - 16

6F13 CLEAN GRAIN LOADING AUGER .................................. 130 -16 3H1 CONDENSER, A/C............................................................ 70 - 96

6F15 CLEAN GRAIN LOADING AUGER, FOLD 1C18 CONNECTING RODS (6076) .......................................... 26 - 15

(660401- ) ............................................................ 130 -18 2F22 CONNECTORS AND TERMINALS, SUPPLEMENTARY 40 - 110

6E23 CLEAN GRAIN LOWER AUGER AND HINGED DOOR 130 -2 1E13 CONNECTORS, ELECTRICAL, WEATHERPACK

6F1 CLEAN GRAIN LOWER ELEVATOR AND CONVEYOR (6076) ............................................................................ 26 - 66

CHAIN .......................................................................... 130 -4 1E7 CONNECTORS, FUEL INJECTION PUMP HOUSING

6F3 CLEAN GRAIN LOWER ELEVATOR AND CONVEYOR (6076HH030, HH034) .................................................. 26 - 60

CHAIN .......................................................................... 130 -6 2E11 CONNECTORS, LOWER HARNESS, 6076 ENGINE

6G5 CLEAN OUT CHUTE, GRAIN TANK .............................. 130 -34 ENGINE ........................................................................ 40 - 74

5D3 CLEANING FAN INTAKE SHIELDS ................................ 120 -46 2E13 CONNECTORS, UPPER HARNESS, 6076 ENGINE ...... 40 - 76

5C24 CLEANING FANS AND SHROUDS ................................ 120 -42 2F14 CONNECTORS, WEATHERPACK .................................. 40 - 102

5D1 CLEANING FANS AND SHROUDS ................................ 120 -44 2B14 CONSOLE PANEL, OVERHEAD...................................... 40 - 4

5H5 CLEANING SHOE AND CONVEYOR AUGER PIVOT 4G7 CONTOUR MASTER - FEEDER HOUSE FRAME,

ARM DRIVE TIGHTENER ............................................ 121 -52 TILT BEAM & CLOSURE PLATES (660401- ) .......... 110 -24

4G7 CLOSURE PLATES, FEEDER HOUSE - CONTOUR 4H7 CONTOUR MASTER DRIVESHAFT

MASTER (660401- ) .............................................. 110 -24 (660401- ) .............................................................. 110 -50

4E16 CLUTCH, COMPRESSOR 3E11 CONTOUR MASTER HYDRAULIC HOSES, L.H SIDE

( -650400) R-12 .................................................... 90 - 84 (OPTIONAL) (660401- ) ........................................ 70 - 30

4E17 CLUTCH, COMPRESSOR 4G11 CONTOUR MASTER LOCKOUT ADAPTER KIT (BELT

( -650400) R-12 .................................................... 90 - 85 PU & 4R CORN HEADS) (660401- ) .................. 110 -28

5G7 CLUTCH, HEADER ELECTROMAGNETIC...................... 121 -30 3F11 CONTOUR MASTER SOLENOID CONTROL RELIEF

4G22 CLUTCH, SLIP, FEEDER HOUSE .................................. 110 -40 VALVE .......................................................................... 70 - 54

4E16 COIL, COMPRESSOR 3F21 CONTOUR MASTER SOLENOID CONTROL VALVE

( -650400) R-12 .................................................... 90 - 84 (660401- ) .............................................................. 70 - 66

1E19 COIL, FIELD WINDING (12V F4) .................................... 26 - 72 3G17 CONTOUR MASTER TILT CYLINDER

1F8 COLD WEATHER STARTING AID (660401- ) .............................................................. 70 - 88

( -655614) ................................................................ 30 - 8 3G19 CONTOUR MASTER TILT CYLINDER HOSES AND

1F10 COLD WEATHER STARTING AID FITTINGS (660401- ) ............................................ 70 - 90

(655615- ) .............................................................. 30 - 10 4G5 CONTOUR MASTER, FEEDER HOUSE SHELL,

3C3 COLUMN, STEERING (LOWER)...................................... 60 - 20 WEAR PLATES AND SEALS (660401- ) ............ 110 -22

3C1 COLUMN, STEERING (UPPER) ...................................... 60 - 18 4G9 CONTOUR MASTER, LOCKOUT ASSEMBLY

4E2 COLUMN, STEERING (UPPER) ...................................... 90 - 70 (OPTIONAL) (660401- ) ........................................ 110 -26

2B16 COMBINE DATA CENTER .............................................. 40 - 6 2G14 CONTROL CABLE, HYDROSTATIC DRIVE.................... 50 - 10

4C17 COMBINE DATA CENTER .............................................. 90 - 34 2B24 CONTROL PANEL, ARMREST ........................................ 40 - 14

3H17 COMPARTMENT, ENGINE .............................................. 80 - 10 3F11 CONTROL RELIEF VALVE MODULE, SOLENOID ........ 70 - 54

3H19 COMPARTMENT, ENGINE .............................................. 80 - 12 1E5 CONTROL UNIT, ELECTRONIC (ROBERT BOSCH)

3H21 COMPARTMENT, ENGINE, AIR DUCT AND AIR DE (6076HH030, HH034) (LATE DESIGN) ...................... 26 - 58

FLECTOR...................................................................... 80 - 14 2I8 CONTROL VALVE ( -655400) .................................... 50 - 54

1C9 COMPLETE BLOCK ASSEMBLY 2I9 CONTROL VALVE (655401- ) .................................... 50 - 55

(ESN 500000- )...................................................... 26 - 6 3F18 CONTROL VALVE KIT, ARMATURE, SOLENOID,

4E17 COMPRESSOR CLUTCH AUGER SWING ............................................................ 70 - 62

( -650400) R-12 .................................................... 90 - 85 3G1 CONTROL VALVE MODULE, SIX STACK SOLENOID

4E16 COMPRESSOR COIL ASSEMBLY & MOUNTINGS (660401- ) .............. 70 - 72

( -650400) R-12 .................................................... 90 - 84 2I10 CONTROL VALVE SOLENOID ........................................ 50 - 56

4E18 COMPRESSOR HARDWARE KIT 6D7 CONTROL VALVE, FLOW, REEL DRIVE ...................... 125 -50

( -650400) R-12 .................................................... 90 - 86 2H15 CONTROL VALVE, HYDROSTATIC DRIVE,

4E23 COMPRESSOR HARDWARE KIT DISPLACEMENT .......................................................... 50 - 36

(650401- ) R134A .................................................. 90 - 92 3F21 CONTROL VALVE, SOLENOID - CONTOUR MASTER

4E19 COMPRESSOR PARTS (660401- ) .............................................................. 70 - 66

( -650400) R-12 .................................................... 90 - 88 3F25 CONTROL VALVE, SOLENOID, BRACKETS.................. 70 - 70

4E17 COMPRESSOR SERVICE VALVES 3H5 CONTROL VALVE, SOLENOID, ENGINE GEARCASE

( -650400) R-12 .................................................... 90 - 85 PRESSURE REGULATOR .......................................... 70 - 100

4E12 COMPRESSOR, AIR CONDITION SYSTEM 3F19 CONTROL VALVE, SOLENOID, REEL FORE/AFT

( -650400) R-12 .................................................... 90 - 80 (650401- ) .............................................................. 70 - 64

4E16 COMPRESSOR, AIR CONDITIONING 6D5 CONTROL, CHECK VALVE, ROD AND KNOB,

( -650400) R-12 .................................................... 90 - 84 CHAFF SPREADER .................................................... 125 -48

6H19 COMPRESSOR, AIR CONDITIONING BELTS................ 170 -3 2F6 CONVENIENCE OUTLET

4E14 COMPRESSOR, AIR CONDITIONING SYSTEM (660401- ) .............................................................. 40 - 94

(650401- ) R134A .................................................. 90 - 82 3D16 CONVERSION PARTS, HUDRAULIC, 200 SERIES

4E16 COMPRESSOR, CLUTCH PULLEY CUTTING PLATFORM.................................................. 70 - 11

( -650400) R-12 .................................................... 90 - 84 5H5 CONVEYOR AUGER AND CLEANING SHOE PIVOT

2D18 CONCAVE ADJUSTING MOTOR .................................... 40 - 57 ARM DRIVE TIGHTENER ............................................ 121 -52

5C3 CONCAVE INDICATOR, CABLE AND BRACKETS ........ 120 -20 6H18 CONVEYOR AUGER BELTS, .......................................... 170 -2

CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00) 10-13

PN=13

1A15

CTS COMBINE (NORTH AMERICAN VERSION)

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

5H3 CONVEYOR AUGERS, SIEVE AND CHAFFER DRIVE 121 -50 5G23 CYLINDER DRIVE ADJUSTING BRACKET,

6F1 CONVEYOR CHAIN AND ELEVATOR, CLEAN GRAIN DUAL-RANGE .............................................................. 121 -46

LOWER ........................................................................ 130 -4 5G13 CYLINDER DRIVE GEARCASE, DUAL-RANGE ............ 121 -36

6F3 CONVEYOR CHAIN AND ELEVATOR, CLEAN GRAIN 5G19 CYLINDER DRIVE INTERMEDIATE SHAFT

LOWER ........................................................................ 130 -6 MOUNTING, DUAL-RANGE ........................................ 121 -42

4G16 CONVEYOR IDLER SHAFT, DRUM AND CHAIN, 5G21 CYLINDER DRIVE INTERMEDIATE SHEAVE,

FEEDER ........................................................................ 110 -34 DUAL-RANGE .............................................................. 121 -44

1D17 COOLANT HEATER, ENGINE (6076).............................. 26 - 44 5G17 CYLINDER DRIVE TIGHTENER, DUAL-RANGE ............ 121 -40

1F18 COOLANT RECOVERY TANK ........................................ 30 - 18 5G12 CYLINDER DRIVE, SINGLE RANGE .............................. 121 -35

1D9 COOLER AND OIL FILTER HOUSING............................ 26 - 34 5G11 CYLINDER DRIVE, SLOW SPEED.................................. 121 -34

1D9 COOLER, ENGINE OIL .................................................... 26 - 34 1D1 CYLINDER HEAD (6076).................................................. 26 - 24

1F11 COOLER, FUEL ................................................................ 30 - 11 1D1 CYLINDER HEAD BOLTS (6076) .................................... 26 - 24

3H1 COOLER, OIL, .................................................................. 70 - 96 1D1 CYLINDER HEAD GASKET (6076).................................. 26 - 24

6H19 COOLING FAN BELTS .................................................... 170 -3 1E15 CYLINDER HEAD GASKET KIT (6076) .......................... 26 - 68

3J7 CORNER SHEET AND DOOR, FRONT, L.H. ................ 80 - 48 1C18 CYLINDER LINERS (6076) .............................................. 26 - 15

3J3 CORNER SHEET, R.H., FRONT...................................... 80 - 44 3F14 CYLINDER SPEED AND REEL LIFT, SOLENOID

3J5 CORNER SHEET, REAR, L H ........................................ 80 - 46 CONTROL VALVE ........................................................ 70 - 58

5H1 COUNTERSHAFT DRIVE, SECONDARY........................ 121 -48 3F9 CYLINDER SPEED HYDRAULIC LINES AND HOSES .. 70 - 52

6H4 COUNTERSHAFT DRIVE, UNLOADING AUGER .......... 130 -58 3B19 CYLINDER, BRAKE SLAVE ............................................ 60 - 12

5G3 COUNTERSHAFT GEARCASE, PRIMARY .................... 121 -26 3B15 CYLINDER, BRAKE, MASTER ........................................ 60 - 8

5G5 COUNTERSHAFT, PRIMARY, GEARCASE .................... 121 -28 3G9 CYLINDER, DRIVE, GRAIN TANK UNLOADING ............ 70 - 80

1B19 COUPLING WITH HUB, ENGINE GEARCASE .............. 20 - 13 3D24 CYLINDER, HEADER LIFT, HYDRAULIC ...................... 70 - 19

5F3 COUPLING, GEARBOX AND SHAFT, MODULE ............ 121 -2 3G7 CYLINDER, HYDRAULIC, UNLOADING AUGER

1E18 COVER STARTER SOLENOID (DENSO) ...................... 26 - 71 SWING, LINES AND HOSES ...................................... 70 - 78

5C17 COVER, BEATER ............................................................ 120 -34 3C13 CYLINDER, STEERING (4-WHEEL DRIVE).................... 60 - 30

4E22 COVER, COMPRESSOR A/C 5B18 CYLINDER, THRESHING, RASP BAR ............................ 120 -10

(650401- ) R134A .................................................. 90 - 91 5B22 CYLINDER, THRESHING, SPIKE TOOTH ...................... 120 -14

3H17 COVER, ENGINE .............................................................. 80 - 10 3G17 CYLINDER, TILT - CONTOUR MASTER

2H5 COVER, FRONT, HYDROSTATIC DRIVE PUMP .......... 50 - 26 (660401- ) .............................................................. 70 - 88

2G24 COVER, HOUSING, TRANSMISSION AND 3G19 CYLINDER, TILT, HOSES AND FITTINGS -

DIFFERENTIAL ............................................................ 50 - 20 CONTOUR MASTER (660401- ) .......................... 70 - 90

2H8 COVER, HYDROSTATIC DRIVE PUMP.......................... 50 - 29 3G15 CYLINDER, UNLOADING AUGER SWING

1C23 COVER, INJECTION PUMP ACCESS (6076) ................ 26 - 20 HYDRAULIC (655552- )........................................ 70 - 86

2H23 COVER, INNER ................................................................ 50 - 44 3B11 CYLINDERS, MASTER .................................................... 60 - 4

2I1 COVER, QUILL AND BEARING ...................................... 50 - 47

1D4 COVER, ROCKER ARM .................................................. 26 - 27

5B9 COVER, THRESHING CYLINDER .................................. 120 -1 D

1C23 COVER, TIMING GEAR (6076)........................................ 26 - 20

6H3 COVERS AND CHANNEL, CROSS AUGER .................. 130 -56 1C19 DAMPER KEY (6076) ...................................................... 26 - 16

5E14 COVERS AND FRAME, MODULE .................................. 120 -82 1E17 DAMPER, CRANKSHAFT, NO PULLEY GROOVES ...... 26 - 70

5E12 CRANK OUT SYSTEM, MODULE .................................. 120 -80 2B16 DATA CENTER, COMBINE .............................................. 40 - 6

1B20 CRANKCASE OIL DRAIN, ENGINE ................................ 20 - 14 4C17 DATA CENTER, COMBINE .............................................. 90 - 34

1C19 CRANKSHAFT (6076) ...................................................... 26 - 16 6J14 DECALS, FRONT.............................................................. 170 -48

1E17 CRANKSHAFT DAMPER, NO PULLEY GROOVES ...... 26 - 70 6J13 DECALS, FRONT WHEEL................................................ 170 -46

1C23 CRANKSHAFT FRONT OIL SEAL (6076) ...................... 26 - 20 6J14 DECALS, REAR ................................................................ 170 -48

6G24 CROSS AUGER BEARING PLATE, L.H. ........................ 130 -52 6J13 DECALS, REAR WHEEL .................................................. 170 -46

6H3 CROSS AUGER COVERS AND CHANNEL.................... 130 -56 6H22 DECALS, SAFETY AND LOCATIONS ............................ 170 -6

6H1 CROSS AUGERS, GRAIN TANK .................................... 130 -54 6H24 DECALS, SAFETY AND LOCATIONS ............................ 170 -8

4E1 CUP HOLDER 6I1 DECALS, SAFETY AND LOCATIONS ............................ 170 -10

(660401- ) .............................................................. 90 - 68 6I3 DECALS, SAFETY AND LOCATIONS ............................ 170 -12

6C12 CURTAIN, LOWER, STRAW SPREADER ...................... 125 -30 6I5 DECALS, SAFETY AND LOCATIONS ............................ 170 -14

6C10 CURTAIN, SPREADER, UPPER ...................................... 125 -28 6I7 DECALS, SAFETY AND LOCATIONS ............................ 170 -16

6G1 CURTAINS, GRAIN TANK ................................................ 130 -30 6I9 DECALS, SAFETY AND LOCATIONS ............................ 170 -18

3D16 CUTTING PLATFORM , 200 SERIES CONVERSION 6I11 DECALS, SAFETY AND LOCATIONS - FRENCH .......... 170 -20

PARTS .......................................................................... 70 - 11 6I13 DECALS, SAFETY AND LOCATIONS - FRENCH .......... 170 -22

3G11 CYLINDER AND MOUNTING, UNLOADING AUGER 6I15 DECALS, SAFETY AND LOCATIONS - FRENCH .......... 170 -24

SWING.......................................................................... 70 - 82 6I17 DECALS, SAFETY AND LOCATIONS - FRENCH .......... 170 -26

3G13 CYLINDER AND MOUNTING, UNLOADING AUGER 6I19 DECALS, SAFETY AND LOCATIONS - FRENCH .......... 170 -28

SWING (650401-655551) ............................................ 70 - 84 6I21 DECALS, SAFETY AND LOCATIONS - ITALIAN .......... 170 -30

1C7 CYLINDER BLOCK FITTINGS (6076).............................. 26 - 4 6J1 DECALS, SAFETY AND LOCATIONS - ITALIAN .......... 170 -34

5B9 CYLINDER COVER, THRESHING .................................. 120 -1 6J3 DECALS, SAFETY AND LOCATIONS - ITALIAN .......... 170 -36

5B14 CYLINDER DOOR 6J5 DECALS, SAFETY AND LOCATIONS - ITALIAN .......... 170 -38

(CORN & GRAIN) (650401-655400) ............................ 120 -6 6J7 DECALS, SAFETY AND LOCATIONS - ITALIAN .......... 170 -40

5B12 CYLINDER DOOR 6J17 DECALS, SEPARATOR MODULE SAFETY.................... 170 -51

(FOR CORN) ( -650400) ...................................... 120 -4 6J16 DECALS, TOP .................................................................. 170 -50

5B16 CYLINDER DOOR (655401- ) .................................... 120 -8 6B10 DECK, SUPPORTS AND FINS, STRAW CHOPPER...... 125 -2

10-14 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00)

PN=14

1A16

CTS COMBINE (NORTH AMERICAN VERSION)

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

2D11 DEFLECTOR - LESS HARVESTRAK 5G1 DRIVE SHAFT, GEARCASE MOUNTING AND

(655542- ) .............................................................. 40 - 50 PRIMARY COUNTERSHAFT ...................................... 121 -24

6H14 DIAL-A-MATIC ELECTRICAL HARNESS ........................ 160 -4 3I21 DRIVE SHIELD, R.H. REAR ............................................ 80 - 38

6H12 DIAL-A-MATIC HEADER HEIGHT CONTROL 3I17 DRIVE SHIELDS, AUGER (R-H SIDE) ............................ 80 - 34

HYDRAULIC LINE AND VALVE BLOCK .................... 160 -2 4F23 DRIVE SHIELDS, CONTOUR MASTER FEEDER

6H13 DIAL-A-MATIC HEADER HEIGHT CONTROL HOUSE (660401-660432) ............................................ 110 -16

VALVE BLOCK SOLENOID ........................................ 160 -3 4G1 DRIVE SHIELDS, CONTOUR MASTER FEEDER

3E15 DIAL-A-MATIC HEADER HEIGHT CONTROL, HOUSE (661186- )................................................ 110 -18

VALVE BLOCK SOLENOID ........................................ 70 - 34 4F21 DRIVE SHIELDS, SAFETY STOP, FEEDER HOUSE .... 110 -14

2G10 DIFFERENTIAL AND TRANSMISSION HOUSING ........ 50 - 6 3I13 DRIVE SIDE SHIELDS, SEPARATOR ............................ 80 - 30

2G22 DIFFERENTIAL GEARS .................................................. 50 - 18 6F18 DRIVE TIGHTENER AND IDLER, CLEAN GRAIN

2G22 DIFFERENTIAL SHAFTS.................................................. 50 - 18 ELEVATOR .................................................................. 130 -22

4E21 DIODE, A/C COMPRESSOR 5H15 DRIVE TIGHTENER, FEEDER HOUSE .......................... 121 -62

(650401- ) R134A .................................................. 90 - 90 4F19 DRIVE TIGHTENER, FIXED SPEED FEEDER

1C25 DIPSTICK, ENGINE OIL (6076) ...................................... 26 - 22 HOUSE.......................................................................... 110 -12

6C16 DISC (BELT TYPE), CHAFF SPREADER 6E4 DRIVE TIGHTENER, LOWER TAILINGS AUGER .......... 125 -72

( -650400) .............................................................. 125 -34 5H5 DRIVE TIGHTENER, PIVOT ARM, CLEANING

6C18 DISC, CHAFF SPREADER (DUAL MOTOR) SHOE AND CONVEYOR AUGER .............................. 121 -52

(650401- ) .............................................................. 125 -36 4F17 DRIVE TIGHTENER, VARIABLE SPEED ........................ 110 -10

2H15 DISPLACEMENT CONTROL VALVE, HYDROSTATIC 2G5 DRIVE WHEELS .............................................................. 50 - 1

DRIVE .......................................................................... 50 - 36 2G6 DRIVE WHEELS, HIGH FLOATATION

2B11 DOME LIGHT, CAB .......................................................... 40 - 1 PLANETARY FINAL DRIVE ........................................ 50 - 2

4B20 DOOR AND GLASS, CAB ................................................ 90 - 12 6H4 DRIVE, COUNTERSHAFT, UNLOADING AUGER .......... 130 -58

3J7 DOOR AND SHEET, L.H. FRONT CORNER .................. 80 - 48 6H19 DRIVE, CYLINDER INTERMEDIATE, BELTS ................ 170 -3

4B18 DOOR LATCH, CAB ........................................................ 90 - 10 6H19 DRIVE, CYLINDER, BELTS.............................................. 170 -3

5B14 DOOR, CYLINDER 1B14 DRIVE, ENGINE ................................................................ 20 - 8

(CORN & GRAIN) (650401-655400) ............................ 120 -6 5H7 DRIVE, FAN, SEPARATOR.............................................. 121 -54

5B12 DOOR, CYLINDER 5H13 DRIVE, FAN, SPEED CONTROL SHEAVE LINKAGE.... 121 -60

(FOR CORN) ( -650400) ...................................... 120 -4 2G25 DRIVE, FINAL .................................................................. 50 - 21

5B16 DOOR, CYLINDER (655401- ).................................... 120 -8 2I22 DRIVE, HYDROSTATIC OIL HOSES, UPPER

3H13 DOOR, ENGINE ACCESS, HANDRAILS, ( -655400) .............................................................. 50 - 68

RADIATOR .................................................................... 80 - 6 2I20 DRIVE, HYDROSTATIC, LOWER OIL LINES

6E23 DOOR, HINGED, CLEAN GRAIN LOWER AUGER ........ 130 -2 (FOUR WHEEL DRIVE) (655401- ) ...................... 50 - 66

6C3 DOOR, LOWER, STRAW CHOPPER .............................. 125 -20 2I18 DRIVE, HYDROSTATIC, LOWER OIL LINES

3I11 DOOR, REAR HOOD........................................................ 80 - 28 (TWO WHEEL DRIVE) (655401- ) ........................ 50 - 64

3I9 DOOR, REAR HOOD ACCESS AND STOP .................. 80 - 26 2I12 DRIVE, HYDROSTATIC, LOWER OIL LINES

1B10 DOOR, ROTARY SCREEN .............................................. 20 - 4 (2&4 WHEEL DRIVE)( -655400) .......................... 50 - 58

5B10 DOOR, SEAL AND STONE TRAP, SEPARATOR/ 2I14 DRIVE, HYDROSTATIC, LOWER OIL LINES

FEEDER HOUSE.......................................................... 120 -2 (2&4 WHEEL DRIVE)( -655400) ............................ 50 - 60

6C14 DOOR, STRAW SPREADER............................................ 125 -32 1B8 DRIVE, ROTARY SCREEN .............................................. 20 - 2

6C1 DOOR, UPPER REAR, STRAW CHOPPER .................. 125 -18 5H1 DRIVE, SECONDARY COUNTERSHAFT........................ 121 -48

3F16 DOUBLE PILOTED, AUGER SWING, SOLENOID 1B12 DRIVES, ENGINE FAN .................................................... 20 - 6

CONTROL VALVE ........................................................ 70 - 60 5F9 DRIVES, ENGINE GEARBOX TO MODULE .................. 121 -8

1B20 DRAIN, ENGINE CRANKCASE OIL ................................ 20 - 14 5F11 DRIVES, ENGINE GEARBOX TO MODULE .................. 121 -10

5C9 DRIVE BELT AND BEATER SHAFT................................ 120 -26 5H19 DRIVES, STRAW CHOPPER .......................................... 121 -66

5C11 DRIVE BELT, BEATER, IDLER........................................ 120 -28 6C8 DRIVES, STRAW SPREADER ........................................ 125 -26

6E1 DRIVE BRACKET, TAILINGS AND LOWER TROUGH 4H7 DRIVESHAFT, CONTOUR MASTER

SUPPORT .................................................................... 125 -69 (660401- ) .............................................................. 110 -50

6E3 DRIVE CHAIN TIGHTENER, UPPER TAILINGS ............ 125 -71 3B17 DRUM, BRAKE.................................................................. 60 - 10

2G14 DRIVE CONTROL CABLE, HYDROSTATIC.................... 50 - 10 4G16 DRUM, CHAIN AND IDLER SHAFT, FEEDER

2H15 DRIVE DISPLACEMENT CONTROL VALVE CONVEYOR.................................................................. 110 -34

HYDROSTATIC ............................................................ 50 - 36 2D21 DUAL LEVEL MONITOR HARNESS, GRAIN TANK ...... 40 - 60

1C19 DRIVE GEAR, OIL PUMP (6076) .................................... 26 - 16 5C13 DUAL SPEED BEATER DRIVE CONVERSION,

5F7 DRIVE GEARCASE, MODULE, L.H................................. 121 -6 700/400 RPM ................................................................ 120 -30

5F5 DRIVE GEARCASE, MODULE, R.H. .............................. 121 -4 2G7 DUAL WHEELS, WIDE-SPACED .................................... 50 - 3

5C5 DRIVE IDLER, STRIPPER BEATER................................ 120 -22 5G23 DUAL-RANGE CYLINDER DRIVE ADJUSTING

2G12 DRIVE LEVER, CABLE AND SWITCH HYDROSTATI BRACKET...................................................................... 121 -46

C .................................................................................... 50 - 8 5G13 DUAL-RANGE CYLINDER DRIVE GEARCASE.............. 121 -36

2H19 DRIVE MOTOR KIT, HYDROSTATIC .............................. 50 - 40 5G19 DUAL-RANGE CYLINDER DRIVE INTERMEDIATE

2H17 DRIVE MOTOR, HYDROSTATIC .................................... 50 - 38 SHAFT MOUNTING...................................................... 121 -42

2J11 DRIVE MOTOR, HYDROSTATIC .................................... 50 - 82 5G21 DUAL-RANGE CYLINDER DRIVE INTERMEDIATE

2H11 DRIVE PISTON ASSEMBLY, HYDROSTATIC ................ 50 - 32 SHEAVE ........................................................................ 121 -44

2H5 DRIVE PUMP, HYDROSTATIC ........................................ 50 - 26 5G17 DUAL-RANGE CYLINDER DRIVE TIGHTENER ............ 121 -40

2H9 DRIVE PUMP, HYDROSTATIC ........................................ 50 - 30 5G15 DUAL-RANGE LOCKOUT ARM ...................................... 121 -38

3G5 DRIVE PUMP, REEL/BELT PICKUP................................ 70 - 76 4C16 DUCTS, HEATER AND AIR CONDITIONING ................ 90 - 33

2H7 DRIVE SHAFT SHIELDS, FINAL .................................... 50 - 28 4H11 DUST FAN BELT, LH SIDE FEEDER

HOUSE-RETROFIT INSTALLATION............................ 110 -54

CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00) 10-15

PN=15

1A17

CTS COMBINE (NORTH AMERICAN VERSION)

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

4H13 DUST FAN, LH SIDE FEEDER 5F17 ENGINE GEARCASE- SEPARATOR DRIVE WET-

HOUSE-RETROFIT INSTALLATION............................ 110 -56 CLUTCH AND PUMP DRIVE SHAFT ........................ 121 -16

5F21 ENGINE GEARCASE, SEPARATOR AND PUMP

DRIVE .......................................................................... 121 -20

E 5F23 ENGINE GEARCASE, SEPARATOR AND PUMP

DRIVE .......................................................................... 121 -22

1E5 E.C.U. (6076HH030, HH034) 5F15 ENGINE GEARCASE, STRAW CHOPPER, UNLOAD-

(ROBERT BOSCH) (LATE DESIGN) .......................... 26 - 58 ING DRIVE AND SEPARATOR DRIVE GEAR .......... 121 -14

1E3 ECU (6076HH030) 5F13 ENGINE GEARCASE, UNLOADING AND SEPARATOR

(EARLY DESIGN) ........................................................ 26 - 56 DRIVE GEAR ................................................................ 121 -12

1F4 ELECTRIC FUEL PUMP, WATER SEPARATOR AND 1B18 ENGINE MOUNTS AND REAR SUPPORT

FUEL FLOAT................................................................ 30 - 4 (655401- ) .............................................................. 20 - 12

2F16 ELECTRICAL CONNECTOR SERVICE KIT .................... 40 - 104 1C5 ENGINE OIL (TORQ-GARD) ............................................ 26 - 1

2F18 ELECTRICAL CONNECTOR SERVICE KIT .................... 40 - 106 1D9 ENGINE OIL COOLER .................................................... 26 - 34

6H14 ELECTRICAL HARNESS, DIAL-A-MATIC........................ 160 -4 1C25 ENGINE OIL DIPSTICK (6076) ...................................... 26 - 22

2F5 ELECTRICAL SERVICE OUTLET .................................... 40 - 93 1C25 ENGINE OIL DIPSTICK TUBE (6076) ............................ 26 - 22

1E13 ELECTRICAL TERMINALS AND CONNECTORS, 1D9 ENGINE OIL FILTER ........................................................ 26 - 34

WEATHERPACK (6076) .............................................. 26 - 66 1D6 ENGINE OIL PUMP .......................................................... 26 - 30

5G7 ELECTROMAGNETIC HEADER CLUTCH ...................... 121 -30 1D8 ENGINE OIL PUMP INTAKE............................................ 26 - 32

1E5 ELECTRONIC CONTROL UNIT (ROBERT BOSCH) 1C15 ENGINE OVERHAUL KIT(S)

(6076HH030, HH034) (LATE DESIGN) ...................... 26 - 58 (ESN 500000- )...................................................... 26 - 12

2E15 ELECTRONIC CONTROL UNIT MOUNTING SUPPORT 40 - 78 2D17 ENGINE PLUGGED AIR FILTER WARNING SWITCH .. 40 - 56

1E5 ELECTRONIC FUEL INJ. PUMP (ROBERT BOSCH) 3H17 ENGINE RAILS ................................................................ 80 - 10

(6076HH030, HH034) (LATE DESIGN) ...................... 26 - 58 1E15 ENGINE REBUILD GASKET KIT (6076) ........................ 26 - 68

1E3 ELECTRONIC FUEL INJECTION PUMP 1E22 ENGINE SPEED SENSOR .............................................. 26 - 75

(6076HH030) (EARLY DESIGN) .................................. 26 - 56 2B16 ENGINE TEMPERATURE GAUGE .................................. 40 - 6

2E17 ELECTRONICS MODULE AND CIRCUIT BOARD, 4C17 ENGINE TEMPERATURE GAUGE .................................. 90 - 34

CENTRAL...................................................................... 40 - 80 1C17 ENGINE UNDERHAUL KIT (STD BRGS)

5D15 ELEMENT, CHAFFER ...................................................... 120 -58 (6076) ............................................................................ 26 - 14

5D17 ELEMENT, CHAFFER ...................................................... 120 -60 1F10 ETHER STARTING AID

5D19 ELEMENT, CHAFFER EXTENSION ................................ 120 -62 (655615- ) .............................................................. 30 - 10

5D23 ELEMENT, SIEVE ............................................................ 120 -66 1D25 ETHER STARTING FITTINGS (6076).............................. 26 - 53

6F1 ELEVATOR AND CONVEYOR CHAIN, CLEAN GRAIN 1D24 EXHAUST MANIFOLD ...................................................... 26 - 52

LOWER ........................................................................ 130 -4 1D24 EXHAUST MANIFOLD GASKETS.................................... 26 - 52

6F3 ELEVATOR AND CONVEYOR CHAIN, CLEAN GRAIN 1F14 EXHAUST PIPES AND MUFFLER .................................. 30 - 14

LOWER ........................................................................ 130 -6 1D1 EXHAUST VALVE SHIELD (6076) .................................. 26 - 24

6F7 ELEVATOR SHAFT, SPROCKET AND SHEAVE, 1D1 EXHAUST VALVES (6076) .............................................. 26 - 24

UPPER CLEAN GRAIN ................................................ 130 -10 1C15 EXPANDED ENGINE OVERHAUL KIT(S)

6F20 ELEVATOR SHIELDS, UPPER CLEAN GRAIN .............. 130 -24 (ESN 500000- )...................................................... 26 - 12

6H19 ELEVATOR, CLEAN GRAIN BELTS................................ 170 -3 4F5 EXPORT ONLY, CAB POST INSTRUMENT

6D23 ELEVATOR, TAILINGS, HOUSING.................................. 125 -66 PANEL LH .................................................................... 90 - 98

6F5 ELEVATOR, UPPER CLEAN GRAIN .............................. 130 -8 5D19 EXTENSION ELEMENT, CHAFFER ................................ 120 -62

3H13 ENGINE ACCESS DOOR, HANDRAILS, AND 6G3 EXTENSIONS, GRAIN TANK .......................................... 130 -32

RADIATOR DOOR........................................................ 80 - 6

3H23 ENGINE ACCESS PLATFORM AND STEP .................... 80 - 16

2E9 ENGINE CIRCUIT BREAKERS ........................................ 40 - 72 F

2E6 ENGINE CIRCUIT BREAKERS

( -660400) .............................................................. 40 - 69 1B12 FAN AND DRIVES, ENGINE ............................................ 20 - 6

2E7 ENGINE CIRCUIT BREAKERS 3I19 FAN DRIVE AND MUD SHIELDS (L.H. SIDE) ................ 80 - 36

(660401- ) .............................................................. 40 - 70 5H9 FAN DRIVE SPEED CONTROL LINKAGE

3H17 ENGINE COMPARTMENT................................................ 80 - 10 ( -655400) .............................................................. 121 -56

3H19 ENGINE COMPARTMENT................................................ 80 - 12 5H11 FAN DRIVE SPEED CONTROL LINKAGE

3H21 ENGINE COMPARTMENT, AIR DUCT AND AIR DEF (655401- ) .............................................................. 121 -58

LECTOR ........................................................................ 80 - 14 5H13 FAN DRIVE SPEED CONTROL SHEAVE LINKAGE...... 121 -60

1B15 ENGINE COOLANT HEATER .......................................... 20 - 9 5H7 FAN DRIVE, SEPARATOR .............................................. 121 -54

1D17 ENGINE COOLANT HEATER (6076) .............................. 26 - 44 2C7 FAN, AIR CONDITIONER PRESSURIZER KIT

1B20 ENGINE CRANKCASE OIL DRAIN.................................. 20 - 14 (640401-650400) .......................................................... 40 - 22

1B14 ENGINE DRIVE ................................................................ 20 - 8 6H20 FAN, CLEANING, BELTS ................................................ 170 -4

1B12 ENGINE FAN AND DRIVES ............................................ 20 - 6 4H13 FAN, DUST, LH SIDE FEEDER

5F9 ENGINE GEARBOX TO MODULE DRIVES .................... 121 -8 HOUSE-RETROFIT INSTALLATION............................ 110 -56

5F11 ENGINE GEARBOX TO MODULE DRIVES .................... 121 -10 4E8 FAN, PRESSURIZER AND AIR CONDITIONING/

5F19 ENGINE GEARCASE........................................................ 121 -18 HEATER ........................................................................ 90 - 76

1B19 ENGINE GEARCASE COUPLING WITH HUB ................ 20 - 13 5C24 FANS AND SHROUDS, CLEANING ................................ 120 -42

3H3 ENGINE GEARCASE OIL FILTER ASSEMBLY .............. 70 - 98 5D1 FANS AND SHROUDS, CLEANING ................................ 120 -44

3F5 ENGINE GEARCASE PRESSURE REGULATOR .......... 70 - 48 5B17 FC:5652 ............................................................................ 120 -9

3H5 ENGINE GEARCASE PRESSURE REGULATOR, 4G20 FEED PLATE LATCH HANDLE ...................................... 110 -38

SOLENOID CONTROL VALVE .................................... 70 - 100 6H18 FEEDER CONVEYOR BELTS.......................................... 170 -2

10-16 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00)

PN=16

1A18

CTS COMBINE (NORTH AMERICAN VERSION)

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

4G18 FEEDER CONVEYOR DRIVE CHAIN, TIGHTENER 6D9 FITTINGS AND LINES, CHAFF SPREADER .................. 125 -52

AND GUIDES................................................................ 110 -36 1C7 FITTINGS, CYLINDER BLOCK (6076) ............................ 26 - 4

4H9 FEEDER CONVEYOR DRIVE CHAIN, TIGHTENER 1D25 FITTINGS, ETHER STARTING (6076) ............................ 26 - 53

AND GUIDES-RETROFIT INATALLATION.................. 110 -52 1F2 FITTINGS, FUEL TANK .................................................... 30 - 2

4G16 FEEDER CONVEYOR IDLER SHAFT, DRUM AND 1F6 FITTINGS, TANK FUEL LINES ........................................ 30 - 6

CHAIN .......................................................................... 110 -34 3G19 FITTINGS, TILT CYLINDER - CONTOUR MASTER

2F10 FEEDER HOUSE BACKSHAFT SPEED SENSOR ........ 40 - 98 (660401- ) .............................................................. 70 - 90

6H20 FEEDER HOUSE BELTS ................................................ 170 -4 3C17 FIXED REAR AXLE

4F23 FEEDER HOUSE DRIVE SHIELDS - CONTOUR (GRAIN) (655542- ) .............................................. 60 - 34

MASTER (660401-660432) .......................................... 110 -16 3C21 FIXED REAR AXLE STEERING TIE RODS

4G1 FEEDER HOUSE DRIVE SHIELDS - CONTOUR GRAIN (655542- ).................................................. 60 - 38

MASTER (661186- ) .............................................. 110 -18 3C20 FIXED REAR AXLE, 4-WHEEL DRIVE, STEERING

4F21 FEEDER HOUSE DRIVE SHIELDS AND SAFETY TIE RODS - GRAIN (655542- )............................ 60 - 37

STOP ............................................................................ 110 -14 4F19 FIXED SPEED FEEDER HOUSE DRIVE TIGHTENER .. 110 -12

5H15 FEEDER HOUSE DRIVE TIGHTENER............................ 121 -62 3H6 FLAT O-RING KIT, HYDRAULIC...................................... 70 - 101

4F19 FEEDER HOUSE DRIVE TIGHTENER (FIXED 1F4 FLOAT, FUEL.................................................................... 30 - 4

SPEED) ........................................................................ 110 -12 4B10 FLOOR MAT AND PANELS, CAB .................................. 90 - 2

4H11 FEEDER HOUSE DUST FAN BELT, LH 4G14 FLOOR, FEEDER HOUSE .............................................. 110 -32

SIDE - RETROFIT INSTALLATION ............................ 110 -54 2J9 FLOW CONTROL VALVE TO CAM LOBE MOTORS,

4H13 FEEDER HOUSE DUST FAN, LH SIDE LINES AND HOSES .................................................... 50 - 80

- RETROFIT INSTALLATION ...................................... 110 -56 3D11 FLOW CONTROL VALVE, REEL DRIVE ........................ 70 - 6

4G14 FEEDER HOUSE FLOOR ................................................ 110 -32 6D7 FLOW CONTROL VALVE, REEL DRIVE ........................ 125 -50

4G3 FEEDER HOUSE FRAME ................................................ 110 -20 1C22 FLYWHEEL (6076)............................................................ 26 - 19

4G7 FEEDER HOUSE FRAME, TILT BEAM & CLOSURE 4B12 FOAM, SEALS, SOUND DEADENING, CAB .................. 90 - 4

PLATES, CONTOUR MASTER (660401- ).......... 110 -24 1C24 FOLLOWER, CAMSHAFT ................................................ 26 - 21

4H5 FEEDER HOUSE FRONT DRIVE SHAFT, SHEAVE 1D3 FOLLOWER, CAMSHAFT ................................................ 26 - 26

AND MOUNTINGS (FIXED SPEED WITH .................. 110 -48 4F13 FOOT CONTROL, FEEDER HOUSE REVERSER.......... 110 -6

4H1 FEEDER HOUSE RETURN FLOOR ................................ 110 -44 4C21 FOOT CONTROL, REVERSER, FEEDER HOUSE ........ 90 - 38

4C21 FEEDER HOUSE REVERSER FOOT CONTROL .......... 90 - 38 4D6 FORE-AND-AFT, SEAT ADJUST .................................... 90 - 48

4F13 FEEDER HOUSE REVERSER FOOT CONTROL .......... 110 -6 2G10 FORKS, SHIFTER ............................................................ 50 - 6

4G5 FEEDER HOUSE SHELL - CONTOUR MASTER 2J17 FOUR WHEEL DRIVE CASE DRAIN HYDRAULIC

(660401- ) .............................................................. 110 -22 LINES ............................................................................ 50 - 88

4G22 FEEDER HOUSE SLIP CLUTCH .................................... 110 -40 2J5 FOUR WHEEL DRIVE HYDRAULIC LINES AND

4G12 FEEDER HOUSE UPPER SHAFT .................................. 110 -30 HOSES, L.H. ( -655400) .................................. 50 - 76

3D15 FEEDER HOUSE VARIABLE DRIVE HYDRAULIC 2J7 FOUR WHEEL DRIVE HYDRAULIC LINES AND HOS

HOSE............................................................................ 70 - 10 ES, L.H. (655401- ).......................................... 50 - 78

4G5 FEEDER HOUSE WEAR PLATES - CONTOUR 2J9 FOUR WHEEL DRIVE LINES AND HOSES .................. 50 - 80

MASTER (660401- ) .............................................. 110 -22 3C13 FOUR-WHEEL DRIVE ...................................................... 60 - 30

4G24 FEEDER HOUSE, UPPER COUNTERSHAFT 5E14 FRAME AND COVERS, MODULE .................................. 120 -82

VARIABLE DRIVE ........................................................ 110 -42 4B22 FRAME AND SUPPORT, CAB ........................................ 90 - 14

3E1 FEEDERHOUSE FITTINGS, HYDRAULIC - EXPORT .... 70 - 20 5D13 FRAME ARMS, PRECLEANER CHAFFER .................... 120 -56

3E1 FEEDERHOUSE PLUMBING- EXPORT .......................... 70 - 20 5D21 FRAME, CHAFFER .......................................................... 120 -64

2B14 FIELD LIGHT SWITCH, AUX, OPTIONAL ...................... 40 - 4 4G3 FRAME, FEEDER HOUSE .............................................. 110 -20

2B20 FIELD LIGHTING, AUXILIARY ........................................ 40 - 10 4G7 FRAME, FEEDER HOUSE, CONTOUR MASTER

2F9 FIELD LIGHTS .................................................................. 40 - 97 (660401- ) .............................................................. 110 -24

1E19 FIELD WINDING COIL (12V F4) ...................................... 26 - 72 3H11 FRAME, SEPARATOR...................................................... 80 - 4

5E18 FILLER PLATE, MODULE GRATE ASSEMBLY 6C20 FRAME, SHIELDS AND HANDLES, CHAFF

AND FINGER BAR ...................................................... 120 -86 SPREADER (BELT TYPE) ( -650400).................. 125 -38

3D13 FILTER ASSEMBLY, MAIN, HYDRAULIC ...................... 70 - 8 5E1 FRAME, SIEVE ................................................................ 120 -68

1D9 FILTER, ENGINE OIL ...................................................... 26 - 34 6C12 FRAME, STRAW SPREADER.......................................... 125 -30

1E11 FILTER, FUEL (6076HH030, HH034) .............................. 26 - 64 2B19 FRONT AND REAR TURN AND TAIL LIGHTS .............. 40 - 9

3H3 FILTER, OIL, ENGINE GEARCASE, ASSEMBLY .......... 70 - 98 2G8 FRONT AXLE .................................................................... 50 - 4

1D12 FILTER, WEEP HOLE (WATER PUMP).......................... 26 - 38 3J7 FRONT CORNER SHEET AND DOOR, L.H. .................. 80 - 48

4E6 FILTERS, AIR CONDITIONING AND HEATER 3J3 FRONT CORNER SHEET, R.H. ...................................... 80 - 44

HOUSING...................................................................... 90 - 74 1C23 FRONT OIL SEAL (6076) ................................................ 26 - 20

2G25 FINAL DRIVE .................................................................... 50 - 21 4F15 FRONT SHAFT WITH REVERSER (VARIABLE)

2H2 FINAL DRIVE AXLE, GEAR AND BEARINGS ................ 50 - 23 9400, 9500 COMBINES .............................................. 110 -8

2H1 FINAL DRIVE HOUSING AND BEARING CAP .............. 50 - 22 3C5 FRONT STEERING HOSES AND LINES ........................ 60 - 22

2H3 FINAL DRIVE PINION, SHAFTS AND BEARINGS ........ 50 - 24 4F9 FRONT VARIABLE DRIVE SHEAVE AND

2H7 FINAL DRIVE SHAFT SHIELDS ...................................... 50 - 28 MOUNTINGS ................................................................ 110 -2

6B18 FINE CUT ROTOR STRAW CHOPPER (PADDLED 1D15 FRONT WATER MANIFOLD ............................................ 26 - 42

NARROW (670401- ) ............................................ 125 -10 6J13 FRONT WHEEL DECALS ................................................ 170 -46

6B16 FINE CUT ROTOR STRAW CHOPPER (STRAIGHT 2C21 FRONT, L.H. MAIN WIRING HARNESS.......................... 40 - 36

NARROW (670401- ) ............................................ 125 -8 1E11 FUEL CHECK VALVE (6076HH030, HH034) .................. 26 - 64

5E18 FINGER BAR, FILLER PLATE AND MODULE 1F11 FUEL COOLER ................................................................ 30 - 11

GRATE ASSEMBLY .................................................... 120 -86 1E11 FUEL FILTER (6076HH030, HH034) .............................. 26 - 64

6B10 FINS, SUPPORTS AND DECK, STRAW CHOPPER...... 125 -2 1E11 FUEL FILTER LINES (6076HH030, HH034).................... 26 - 64

CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00) 10-17

PN=17

1A19

CTS COMBINE (NORTH AMERICAN VERSION)

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

1F4 FUEL FLOAT .................................................................... 30 - 4 5G1 GEARCASE MOUNTING, PRIMARY COUNTERSHAFT

2B16 FUEL GAUGE .................................................................. 40 - 6 AND DRIVE SHAFT .................................................... 121 -24

4C17 FUEL GAUGE .................................................................. 90 - 34 5G13 GEARCASE, DUAL-RANGE CYLINDER DRIVE ............ 121 -36

1E1 FUEL INJECTION LINES (6076HH030 OR 5F17 GEARCASE, ENGINE ...................................................... 121 -16

HH034) .......................................................................... 26 - 54 5F19 GEARCASE, ENGINE ...................................................... 121 -18

1E9 FUEL INJECTION NOZZLE (DENSO) 5F23 GEARCASE, ENGINE ...................................................... 121 -22

(HH030 OR HH034)...................................................... 26 - 62 6G15 GEARCASE, HORIZONTAL UNLOADING AUGER

1E1 FUEL INJECTION NOZZLES (6076HH030 OR DRIVE .......................................................................... 130 -44

HH034) .......................................................................... 26 - 54 2J13 GEARCASE, HYDROSTATIC DRIVE PUMP,MAIN

1E5 FUEL INJECTION PUMP (ROBERT BOSCH) HYDRAULIC PUMP CONNECTING HARDWARE ...... 50 - 84

(6076HH030, HH034) (LATE DESIGN) ...................... 26 - 58 5F7 GEARCASE, MODULE DRIVE, L,H................................. 121 -6

1E3 FUEL INJECTION PUMP (6076HH030) 5F5 GEARCASE, MODULE DRIVE, R.H. .............................. 121 -4

(EARLY DESIGN) ........................................................ 26 - 56 5G3 GEARCASE, PRIMARY COUNTERSHAFT .................... 121 -26

1E7 FUEL INJECTION PUMP HOUSING CONNECTOR 5G5 GEARCASE, PRIMARY COUNTERSHAFT .................... 121 -28

(6076HH030, HH034) .................................................. 26 - 60 2G22 GEARS, DIFFERENTIAL .................................................. 50 - 18

1E5 FUEL LEAK-OFF LINES (ROBERT BOSCH) 2G18 GEARS, TRANSMISSION INPUT SHAFT ...................... 50 - 14

(6076HH030, HH034) (LATE DESIGN) ...................... 26 - 58 2G20 GEARS, TRANSMISSIONPINION SHAFT ...................... 50 - 16

1E1 FUEL LEAK-OFF LINES (6076HH030 OR 2G16 GEARSHIFT LEVER AND LINKAGE .............................. 50 - 12

HH034) .......................................................................... 26 - 54 4C19 GEARSHIFT LEVER AND LINKAGE .............................. 90 - 36

1E3 FUEL LEAK-OFF LINES (6076HH030) 4B20 GLASS AND DOOR, CAB................................................ 90 - 12

(EARLY DESIGN) ........................................................ 26 - 56 4D20 GLOVE BOX, ARMREST (R.H.) ...................................... 90 - 62

1E3 FUEL SHUT-OFF SOLENOID HOUSING 5D11 GRAIN LEAK KIT .............................................................. 120 -54

(6076HH030) (EARLY DESIGN) .................................. 26 - 56 6G1 GRAIN TANK AND CURTAINS ........................................ 130 -30

1F2 FUEL TANK, SUPPORTS, AND FITTINGS .................... 30 - 2 6F24 GRAIN TANK BASE.......................................................... 130 -28

1E8 FUEL TRANSFER PUMP (ROBERT BOSCH) 6H1 GRAIN TANK CROSS AUGERS ...................................... 130 -54

(6076HH030, HH034) .................................................. 26 - 61 2D21 GRAIN TANK DUAL LEVEL MONITOR HARNESS........ 40 - 60

6G3 GRAIN TANK EXTENSIONS ............................................ 130 -32

6H7 GRAIN TANK SAMPLING TROUGH................................ 130 -62

G 6F22 GRAIN TANK TOP ............................................................ 130

3G9 GRAIN TANK UNLOADING DRIVE CYLINDER .............. 70 - 80

1E15 GASKET KIT, CYLINDER HEAD (6076).......................... 26 - 68 3G9 GRAIN TANK UNLOADING DRIVE CYLINDER

1E15 GASKET KIT, ENGINE REBUILD (6076) ........................ 26 - 68 MOUNTING .................................................................. 70 - 80

1E15 GASKET KIT, SHORT BLOCK (6076) ............................ 26 - 68 2D5 GRAIN TANK WIRING HARNESS, LIGHT, LIMIT

1D1 GASKET, CYLINDER HEAD (6076) ................................ 26 - 24 SWITCH AND LEVEL MONITOR ................................ 40 - 44

1D19 GASKET, INTAKE MANIFOLD ........................................ 26 - 46 5B20 GRATE AND RASP BAR CONCAVE .............................. 120 -12

1D9 GASKET, OIL COOLER.................................................... 26 - 34 6H6 GUIDE, DRIVE BELT, UNLOADING AUGER.................. 130 -60

1D9 GASKET, OIL FILTER HOUSING .................................... 26 - 34 4G18 GUIDES, TIGHTENER AND FEEDER CONVEYOR

1D11 GASKET, OIL PAN .......................................................... 26 - 36 DRIVE CHAIN .............................................................. 110 -36

1D8 GASKET, OIL PUMP INTAKE .......................................... 26 - 32 4H9 GUIDES, TIGHTENER AND FEEDER CONVEYOR

1C21 GASKET, REAR OIL SEAL (6076) .................................. 26 - 18 DRIVE CHAIN-RETROFIT INSTALLATION ................ 110 -52

1D4 GASKET, ROCKER ARM COVER .................................. 26 - 27

1C23 GASKET, TIMING GEAR COVER (6076)........................ 26 - 20

1D20 GASKET, TURBOCHARGER .......................................... 26 - 48 H

1D15 GASKET, WATER MANIFOLD ........................................ 26 - 42

1D12 GASKET, WATER PUMP ................................................ 26 - 38 5C19 HANDLE, LATCHES, SHOE GRAIN SUPPLY AUGER

1D24 GASKETS, EXHAUST MANIFOLD .................................. 26 - 52 CLEANOUT DOOR ...................................................... 120 -36

1D18 GASKETS, INTAKE MANIFOLD ...................................... 26 - 45 6C22 HANDLES AND SHIELDS, CHAFF SPREADER

3D7 GAUGE, ACCUMULATOR PRESSURE .......................... 70 - 2 (DUAL MOTOR) (650401- ).................................. 125 -40

2B16 GAUGE, ENGINE TEMPERATURE ................................ 40 - 6 6C20 HANDLES, FRAME AND SHIELDS, CHAFF

4C17 GAUGE, ENGINE TEMPERATURE ................................ 90 - 34 SPREADER (BELT TYPE) ( -650400).................. 125 -38

4F11 GEAR BOX, REVERSER.................................................. 110 -4 4C1 HANDRAIL AND LADDER, OPERATOR’S PLATFORM 90 - 18

6G5 GEAR CASE, VERTICAL AUGER LOWER .................... 130 -34 3H13 HANDRAILS, RADIATOR DOOR, ENGINE

1C24 GEAR, CAMSHAFT .......................................................... 26 - 21 ACCESS DOOR .......................................................... 80 - 6

2H2 GEAR, FINAL DRIVE........................................................ 50 - 23 4F3 HARDWARE KIT, CAB .................................................... 90 - 96

1E3 GEAR, FUEL INJECTION PUMP 4E18 HARDWARE KIT, COMPRESSOR

(6076HH030) (EARLY DESIGN) .................................. 26 - 56 ( -650400) R-12 .................................................... 90 - 86

1E5 GEAR, INJECTION PUMP (6076HH030, HH034) 4E23 HARDWARE KIT, COMPRESSOR

(ROBERT BOSCH)(LATE DESIGN) ............................ 26 - 58 (650401- ) R134A .................................................. 90 - 92

1D6 GEAR, OIL PUMP DRIVE ................................................ 26 - 30 2J13 HARDWARE, HYDRAULIC PUMP CONNECTING ........ 50 - 84

1C19 GEAR, OIL PUMP DRIVE (6076) .................................... 26 - 16 2E11 HARNESS CONNECTORS, LOWER, 6076 ENGINE .... 40 - 74

1C22 GEAR, STARTER (6076).................................................. 26 - 19 2E13 HARNESS CONNECTORS, UPPER, 6076 ENGINE ...... 40 - 76

5F9 GEARBOX, ENGINE TO MODULE DRIVES .................. 121 -8 2B22 HARNESS, ARMREST WIRING ...................................... 40 - 12

5F11 GEARBOX, ENGINE TO MODULE DRIVES .................. 121 -10 2B12 HARNESS, CAB WIRING ................................................ 40 - 2

5F3 GEARBOX, SHAFT AND COUPLING, MODULE ............ 121 -2 2D21 HARNESS, GRAIN TANK DUAL LEVEL MONITOR ...... 40 - 60

5C15 GEARCASE AND SHEAVE, BEATER ............................ 120 -32 2C23 HARNESS, L.H. MAIN WIRING, CENTER ...................... 40 - 38

6F16 GEARCASE AND SHEAVE, CLEAN GRAIN 2C21 HARNESS, L.H. MAIN WIRING, FRONT ........................ 40 - 36

ELEVATOR .................................................................. 130 -20 2D15 HARNESS, LOWER, ENGINE, 6076 .............................. 40 - 54

10-18 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00)

-26

PN=18

1A20

CTS COMBINE (NORTH AMERICAN VERSION)

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

2D13 HARNESS, UPPER, ENGINE, 6076 ................................ 40 - 52 6G9 HORIZONTAL UNLOADING AUGER SWIVEL ................ 130 -38

1E3 HARNESS, WIRING (6076HH030) 2C19 HORN ................................................................................ 40 - 34

(EARLY DESIGN) ........................................................ 26 - 56 3F3 HOSE, CHARGE PRESSURE.......................................... 70 - 46

1E5 HARNESS, WIRING (6076HH030, HH034) 3D15 HOSE, HYDRAULIC, VARIABLE DRIVE, FEEDER

(ROBERT BOSCH)(LATE DESIGN) ............................ 26 - 58 HOUSE.......................................................................... 70 - 10

2C5 HARNESS, WIRING, A/C, HEATER AND AIRSEAT 3E19 HOSE, LINE AND MOUNTING, ONE-HALF GALLON

(660401- ) .............................................................. 40 - 20 DUAL ACCUMULATOR ( -655400)...................... 70 - 38

2C19 HARNESS, WIRING, MAIN, L.H. FRONT........................ 40 - 34 6D15 HOSES AND LINES, CHAFF SPREADER

2D3 HARNESS, WIRING, R.H. MAIN...................................... 40 - 42 (DUAL MOTOR) (650401- ).................................. 125 -58

2C1 HARNESS, WIRING, STEERING COLUMN 2J9 HOSES AND LINES, FOUR WHEEL DRIVE .................. 50 - 80

(646237-) ...................................................................... 40 - 16 2J5 HOSES AND LINES, FOUR WHEEL DRIVE

2B16 HARVESTRAK .................................................................. 40 - 6 HYDRAULIC, L.H. ( -655400) ............................ 50 - 76

4C17 HARVESTRAK .................................................................. 90 - 34 2J7 HOSES AND LINES, FOUR WHEEL DRIVE HYDRAU

2D9 HARVESTRAK MONITOR SYSTEM ................................ 40 - 48 LIC, L.H. (655401- ) .......................................... 50 - 78

2D9 HARVESTRAK WIRING HARNESS ................................ 40 - 48 3E9 HOSES AND LINES, HEADER LIFT .............................. 70 - 28

1D1 HEAD BOLT KIT (6076) .................................................. 26 - 24 3F9 HOSES AND LINES, HYDRAULIC, CYLINDER

1D1 HEAD, CYLINDER (6076) ................................................ 26 - 24 SPEED.......................................................................... 70 - 52

6H20 HEADER BELTS .............................................................. 170 -4 3E5 HOSES AND LINES, HYDRAULIC, REEL FORE-

5G7 HEADER ELECTROMAGNETIC CLUTCH ...................... 121 -30 AND-AFT, FRONT ........................................................ 70 - 24

4F5 HEADER HEIGHT CONTROL GAUGE ON LH 3D19 HOSES AND LINES, HYDRAULIC, REEL PUMP .......... 70 - 14

CAB POST (EXPORT ONLY) ...................................... 90 - 98 3D21 HOSES AND LINES, HYDRAULIC, REEL PUMP .......... 70 - 16

6H13 HEADER HEIGHT CONTROL VALVE ............................ 160 -3 2J1 HOSES AND LINES, OIL COOLER, HYDROSTATIC

6H12 HEADER HEIGHT CONTROL, DIAL-A-MATIC ( -665400) .............................................................. 50 - 72

HYDRAULIC LINE AND VALVE BLOCK .................... 160 -2 2J3 HOSES AND LINES, OIL COOLER, HYDROSTATIC

3E15 HEADER HEIGHT CONTROL, DIAL-A-MATIC, (665401- ).............................................................. 50 - 74

VALVE BLOCK SOLENOID ........................................ 70 - 34 3G21 HOSES AND LINES, OIL COOLER, WET CLUTCH

6H14 HEADER HEIGHT CONTROL, ELECTRIC ( -665400) .............................................................. 70 - 92

HARNESS, DIAL-A-MATIC .......................................... 160 -4 3G23 HOSES AND LINES, OIL COOLER, WET CLUTCH

3D24 HEADER LIFT HYDRAULIC CYLINDER ........................ 70 - 19 (665401- ) .............................................................. 70 - 94

3E9 HEADER LIFT HYDRAULIC LINES AND HOSES .......... 70 - 28 2I16 HOSES AND LINES, OIL, HYDROSTATIC DRIVE,

3F12 HEADER LIFT MODULE, SOLENOID CONTROL LOWER (TWO WHEEL DRIVE)(655401- ) .......... 50 - 62

VALVE .......................................................................... 70 - 56 3D17 HOSES AND LINES, REEL DRIVE, HYD., FRONT........ 70 - 12

2E23 HEADER LIGHTS, (EXPORT ONLY) .............................. 40 - 86 3D9 HOSES AND LINES, REEL DRIVE, HYDRAULIC,

1A9 HEADERS.......................................................................... 10 - 8 L.H. SIDE ( -655400) ............................................ 70 - 4

2E25 HEADLIGHTS UNDER CAB (EXPORT ONLY) .............. 40 - 88 3D10 HOSES AND LINES, REEL DRIVE, HYDRAULIC,

1F11 HEAT EXCHANGER, FUEL.............................................. 30 - 11 L.H. SIDE (655401- ) ............................................ 70 - 5

2C9 HEATER AND AIR CONDITIONER SWITCH.................. 40 - 24 3E3 HOSES AND LINES, REEL LIFT .................................... 70 - 22

4C16 HEATER AND AIR CONDITIONING DUCTS .................. 90 - 33 3C5 HOSES AND LINES, STEERING, FRONT ...................... 60 - 22

4E6 HEATER HOUSING AND AIR CONDITIONING 3C11 HOSES AND LINES, STEERING, REAR ........................ 60 - 28

FILTERS........................................................................ 90 - 74 3G7 HOSES AND LINES, UNLOADING AUGER SWING

4F1 HEATER SYSTEM ............................................................ 90 - 94 HYDRAULIC CYLINDER .............................................. 70 - 78

2C3 HEATER WIRING HARNESS 3E13 HOSES AND LINES, UPPER RETURN, HYDRAULIC

( -660400) .............................................................. 40 - 18 RESERVOIR ................................................................ 70 - 32

2C5 HEATER WIRING HARNESS 3G9 HOSES, GRAIN TANK UNLOADING DRIVE

(660401- ) .............................................................. 40 - 20 CYLINDER.................................................................... 70 - 80

1B15 HEATER, ENGINE COOLANT ........................................ 20 - 9 3E11 HOSES, HYDRAULIC, CONTOUR MASTER (L.H.)

1D17 HEATER, ENGINE COOLANT (6076).............................. 26 - 44 (OPTIONAL) (660401- ) ........................................ 70 - 30

4D8 HEIGHT ADJUSTER, CAB SEAT .................................... 90 - 50 6D13 HOSES, LINES AND MOTOR, CHAFF SPREADER

2G6 HIGH FLOATATION DRIVE WHEELS ( -650400) .............................................................. 125 -56

PLANETARY FINAL DRIVE ........................................ 50 - 2 6E18 HOSES, LUBE, L. H. ........................................................ 125 -86

2D19 HOLDDOWN, BATTERY .................................................. 40 - 58 6E16 HOSES, LUBE, R. H......................................................... 125 -84

4E1 HOLDER, CUP 2I20 HOSES, OIL, HYDROSTATIC DRIVE, LOWER

(660401- ) .............................................................. 90 - 68 (FOUR WHEEL DRIVE) (655401- ) ...................... 50 - 66

3I5 HOOD, REAR.................................................................... 80 - 22 2I18 HOSES, OIL, HYDROSTATIC DRIVE, LOWER

3I9 HOOD, REAR, ACCESS DOOR AND STOP .................. 80 - 26 (TWO WHEEL DRIVE) (655401- )........................ 50 - 64

6G22 HORIZONTAL UNLOADING AUGER 2I14 HOSES, OIL, HYDROSTATIC DRIVE, LOWER

(17- AND 20-FT.) .......................................................... 130 -50 (2&4 WHEEL DRIVE)( -655400) .......................... 50 - 60

6G15 HORIZONTAL UNLOADING AUGER DRIVE 2I12 HOSES, OIL, HYDROSTATIC DRIVE, LOWER

GEARCASE .................................................................. 130 -44 (2&4 WHEEL DRIVE)( -655400) ............................ 50 - 58

6G20 HORIZONTAL UNLOADING AUGER HOUSING 2I22 HOSES, OIL, HYDROSTATIC DRIVE, UPPER

(EXPORT) (17 AND 20 FT.)........................................ 130 -49A ( -655400) .............................................................. 50 - 68

6G16 HORIZONTAL UNLOADING AUGER HOUSING 3F7 HOSES, PRESSURE, HYDRAULIC ................................ 70 - 50

(14- AND 17-FT.) .......................................................... 130 -46 1F16 HOSES, RADIATOR ........................................................ 30 - 16

6G18 HORIZONTAL UNLOADING AUGER HOUSING 3B23 HOSES, STEERING, UPPER .......................................... 60 - 16

(17- AND 20-FT.) .......................................................... 130 -48 3G19 HOSES, TILT CYLINDER - CONTOUR MASTER

6G13 HORIZONTAL UNLOADING AUGER HUB SUPPORT (660401- ) .............................................................. 70 - 90

AND SWITCH .............................................................. 130 -42

CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00) 10-19

PN=19

1A21

CTS COMBINE (NORTH AMERICAN VERSION)

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

2I24 HOSES, UPPER, HYDROSTATIC DRIVE 2J13 HYDRAULIC PUMP CONNECTING HARDWARE,

(FOUR WHEEL DRIVE)(655401- ) ...................... 50 - 70 HYDROSTATIC DRIVE PUMP .................................... 50 - 84

6D11 HOSES, VALVE, PUMP AND LINES, CHAFF 3G3 HYDRAULIC PUMP, MAIN .............................................. 70 - 74

SPREADER .................................................................. 125 -54 3E23 HYDRAULIC RETURN LINES

4C15 HOUSING AND AIR FILTER, CAB .................................. 90 - 32 ( -655400) .............................................................. 70 - 42

6B22 HOUSING AND KNIFEBANK, STRAW CHOPPER ........ 125 -14 3F1 HYDRAULIC RETURN LINES

6B24 HOUSING AND KNIFEBANK, STRAW CHOPPER ........ 125 -16 (655401- ) .............................................................. 70 - 44

6E6 HOUSING AND PADDLE ASSEMBLY, UPPER 3B23 HYDRAULIC STEERING HOSES, UPPER AND

TAILINGS AUGER ........................................................ 125 -74 ATTENUATOR .............................................................. 60 - 16

5C20 HOUSING AND SHOE GRAIN SUPPLY AUGERS ........ 120 -38 3E13 HYDRAULIC UPPER RETURN LINES AND HOSES,

5C22 HOUSING AND SHOE GRAIN SUPPLY AUGERS ........ 120 -40 RESERVOIR ................................................................ 70 - 32

1E7 HOUSING CONNECTORS, FUEL INJECTION PUMP 3E16 HYDRAULIC/HYDROSTATIC OIL RESERVOIR

(6076HH030, HHO34) .................................................. 26 - 60 AND MOUNTINGS ...................................................... 70 - 35

2G24 HOUSING COVER, TRANSMISSION AND 2H12 HYDROSTATIC DRIVE CHARGE PUMP ........................ 50 - 33

DIFFERENTIAL ............................................................ 50 - 20 2H13 HYDROSTATIC DRIVE CHARGE PUMP

2H1 HOUSING, FINAL DRIVE ................................................ 50 - 22 (RING AND PINION).................................................... 50 - 34

1E3 HOUSING, FUEL SHUT-OFF SOLENOID 2G14 HYDROSTATIC DRIVE CONTROL CABLE .................... 50 - 10

(6076HH030) (EARLY DESIGN) .................................. 26 - 56 2H15 HYDROSTATIC DRIVE DISPLACEMENT CONTROL

6G20 HOUSING, HORIZONTAL UNLOADING AUGER VALVE .......................................................................... 50 - 36

(EXPORT) (17 AND 20 FT.)........................................ 130 -49A 2I24 HYDROSTATIC DRIVE HOSES, UPPER

6G16 HOUSING, HORIZONTAL UNLOADING AUGER (FOUR WHEEL DRIVE)(655401- ) ...................... 50 - 70

(14- AND 17-FT.) .......................................................... 130 -46 2G12 HYDROSTATIC DRIVE LEVER, CABLE AND SWITC

6G18 HOUSING, HORIZONTAL UNLOADING AUGER H .................................................................................... 50 - 8

(17- AND 20-FT.) .......................................................... 130 -48 2H17 HYDROSTATIC DRIVE MOTOR ...................................... 50 - 38

2H9 HOUSING, HYDROSTATIC DRIVE PUMP...................... 50 - 30 2J11 HYDROSTATIC DRIVE MOTOR ...................................... 50 - 82

1D9 HOUSING, OIL COOLER AND FILTER .......................... 26 - 34 2H19 HYDROSTATIC DRIVE MOTOR KIT .............................. 50 - 40

1C21 HOUSING, REAR OIL SEAL (6076) ................................ 26 - 18 2I22 HYDROSTATIC DRIVE OIL HOSES, UPPER

3C18 HOUSING, SPINDLE, REAR AXLE ................................ 60 - 35 ( -655400) ................................................................ 50 - 68

6D23 HOUSING, TAILINGS ELEVATOR .................................. 125 -66 2I20 HYDROSTATIC DRIVE OIL LINES AND HOSES,

1D15 HOUSING, THERMOSTAT, FRONT ................................ 26 - 42 LOWER (FOUR WHEEL DRIVE)(655401- ) .......... 50 - 66

1D22 HOUSING, TURBOCHARGER CENTER 2I16 HYDROSTATIC DRIVE OIL LINES AND HOSES,

(AIRESEARCH) ............................................................ 26 - 50 LOWER (TWO WHEEL DRIVE)(655401- ) .......... 50 - 62

1D23 HOUSING, TURBOCHARGER CENTER (SCHWITZER) 26 - 51 2I18 HYDROSTATIC DRIVE OIL LINES AND HOSES,

6G13 HUB SUPPORT AND SWITCH, HORIZONTAL LOWER (TWO WHEEL DRIVE)(655401- ) ............ 50 - 64

UNLOADING AUGER .................................................. 130 -42 2I12 HYDROSTATIC DRIVE OIL LINES AND HOSES,

3D24 HYDRAULIC CYLINDER, HEADER LIFT ........................ 70 - 19 LOWER (2&4 WHEEL DRIVE)( -655400) ............ 50 - 58

3D13 HYDRAULIC FILTER ASSEMBLY, MAIN ........................ 70 - 8 2I14 HYDROSTATIC DRIVE OIL LINES AND HOSES,

3E1 HYDRAULIC FITTINGS, FEEDERHOUSE - EXPORT .... 70 - 20 LOWER (2&4 WHEEL DRIVE)( -655400) .............. 50 - 60

3H6 HYDRAULIC FLAT O-RING KIT ...................................... 70 - 101 2H11 HYDROSTATIC DRIVE PISTON ...................................... 50 - 32

3D15 HYDRAULIC HOSE, VARIABLE DRIVE, FEEDER 2H8 HYDROSTATIC DRIVE PUMP COVER .......................... 50 - 29

HOUSE.......................................................................... 70 - 10 2H5 HYDROSTATIC DRIVE PUMP, FRONT COVER AND

3E11 HYDRAULIC HOSES, CONTOUR MASTER (L.H.) SHAFT .......................................................................... 50 - 26

(OPTIONAL) (660401- ) ........................................ 70 - 30 2H9 HYDROSTATIC DRIVE PUMP, HOUSING,

3F9 HYDRAULIC LINES AND HOSES, CYLINDER SWASHPLATE, AND SERVO CYLINDERS................ 50 - 30

SPEED.......................................................................... 70 - 52 2H14 HYDROSTATIC MOTOR VALVE .................................... 50 - 35

3E9 HYDRAULIC LINES AND HOSES, HEADER LIFT ........ 70 - 28 2J1 HYDROSTATIC OIL COOLER LINES AND HOSES

2J5 HYDRAULIC LINES AND HOSES, L.H., ( -665400) .............................................................. 50 - 72

FOUR WHEEL DRIVE ( -655400) .................... 50 - 76 2J3 HYDROSTATIC OIL COOLER LINES AND HOSES

2J7 HYDRAULIC LINES AND HOSES, L.H., FOUR WH (665401- ) .............................................................. 50 - 74

EEL DRIVE (655401- )...................................... 50 - 78

3E5 HYDRAULIC LINES AND HOSES, REEL

FORE-AND-AFT, FRONT ............................................ 70 - 24 I

3D9 HYDRAULIC LINES AND HOSES, REEL DRIVE

L.H. SIDE ( -655400) ............................................ 70 - 4 6F18 IDLER AND DRIVE TIGHTENER, CLEAN GRAIN

3D10 HYDRAULIC LINES AND HOSES, REEL DRIVE ELEVATOR .................................................................. 130 -22

L.H. SIDE (655401- ) ............................................ 70 - 5 4G16 IDLER SHAFT, DRUM AND CHAIN, FEEDER

3D17 HYDRAULIC LINES AND HOSES, REEL DRIVE, CONVEYOR.................................................................. 110 -34

FRONT .......................................................................... 70 - 12 5C11 IDLER, BEATER DRIVE BELT ........................................ 120 -28

3D19 HYDRAULIC LINES AND HOSES, REEL PUMP............ 70 - 14 5C5 IDLER, STRIPPER BEATER DRIVE................................ 120 -22

3D21 HYDRAULIC LINES AND HOSES, REEL PUMP............ 70 - 16 1D12 IMPELLER, WATER PUMP .............................................. 26 - 38

2J17 HYDRAULIC LINES, FOUR WHEEL DRIVE CASE 5C3 INDICATOR, CABLE AND BRACKETS, CONCAVE ...... 120 -20

DRAIN .......................................................................... 50 - 88 1E5 INJ. PUMP, ELECTRONIC FUEL (RB)

3E7 HYDRAULIC LINES, REEL FORE-AND-AFT, L.H. (6076HH030, HH034) (LATE DESIGN) ...................... 26 - 58

SIDE .............................................................................. 70 - 26 1E9 INJECTION NOZZLE, FUEL (DENSO)

3G15 HYDRAULIC MOUNTING, UNLOADING AUGER (HH030 OR HH034)...................................................... 26 - 62

SWING (655552- ) ................................................ 70 - 86 1C23 INJECTION PUMP ACCESS COVER (6076) .................. 26 - 20

3F7 HYDRAULIC PRESSURE LINES AND HOSES .............. 70 - 50

10-20 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00)

PN=20

1A22

CTS COMBINE (NORTH AMERICAN VERSION)

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

1E5 INJECTION PUMP GEAR (6076HH030, HH034) 1D1 KIT, HEAD BOLT (6076) .................................................. 26 - 24

(ROBERT BOSCH)(LATE DESIGN) ............................ 26 - 58 3H6 KIT, HYDRAULIC FLAT O-RING...................................... 70 - 101

1E3 INJECTION PUMP LUBE LINE 2H19 KIT, HYDROSTATIC DRIVE MOTOR .............................. 50 - 40

(6076HH030) (EARLY DESIGN) .................................. 26 - 56 4G11 KIT, LOCKOUT ADAPTER - CONTOUR MASTER

1E5 INJECTION PUMP LUBE LINE (ROBERT BOSCH) (BELT PU & 4R CORN HEADS)(660401- ) .............. 110 -28

(6076HH030, HH034) (LATE DESIGN) ...................... 26 - 58 6C5 KIT, METRIC KEY STOCK .............................................. 125 -22

1E3 INJECTION PUMP, ELECTRONIC FUEL 6E20 KIT, METRIC KEY STOCK .............................................. 125 -88

(6076HH030) (EARLY DESIGN) .................................. 26 - 56 1C18 KIT, PISTON/LINER (6076)

2D12 INLET AIR TEMPERTURE SWITCH................................ 40 - 51 (ESN 500000- )...................................................... 26 - 15

2H23 INNER COVER.................................................................. 50 - 44 3D11 KIT, REEL DRIVE FLOW CONTROL REPAIR................ 70 - 6

2G18 INPUT SHAFT, TRANSMISSION .................................... 50 - 14 4D5 KIT, RETROFIT SEAT BELT

1D1 INSERTS, VALVE SEAT (6076) ...................................... 26 - 24 (MACHINES PRIOR TO 1996 MODEL YEAR) .......... 90 - 46

2B16 INSTRUMENT PANEL, CAB POST ................................ 40 - 6 2F20 KIT, TERMINAL AND WIRING ........................................ 40 - 108

4C17 INSTRUMENT PANEL, CAB POST ................................ 90 - 34 1C17 KIT, UNDERHAUL ENGINE (STD BRGS)

4F5 INSTRUMENT PANEL, CAB POST LH (6076) ............................................................................ 26 - 14

(EXPORT ONLY) .......................................................... 90 - 98 1D14 KIT, WATER PUMP REPAIR (6076)................................ 26 - 40

1D18 INTAKE MANIFOLD (EARLY DESIGN) .......................... 26 - 45 6B22 KNIFEBANK AND HOUSING, STRAW CHOPPER ........ 125 -14

1D19 INTAKE MANIFOLD (LATE DESIGN) .............................. 26 - 46 6B24 KNIFEBANK AND HOUSING, STRAW CHOPPER ........ 125 -16

1D19 INTAKE MANIFOLD GASKET .......................................... 26 - 46 6D5 KNOB, CONTROL, CHECK VALVE AND ROD,

1D18 INTAKE MANIFOLD GASKETS........................................ 26 - 45 CHAFF SPREADER .................................................... 125 -48

4H15 INTAKE SHIELD................................................................ 110 -58

1F12 INTAKE TUBES, AIR CLEANER...................................... 30 - 12

1D1 INTAKE VALVES (6076) .................................................. 26 - 24 L

1D8 INTAKE, ENGINE OIL PUMP .......................................... 26 - 32

1B16 INTERCOOLER ................................................................ 20 - 10 2D1 L.H. AND R.H. MAIN WIRING HARNESS, REAR .......... 40 - 40

1B22 INTERCOOLER, AIR ........................................................ 20 - 16 3J7 L.H. FRONT CORNER SHEET AND DOOR .................. 80 - 48

4B16 INTERIOR TRIM PANELS, CAB ...................................... 90 - 8 2C23 L.H. MAIN WIRING HARNESS, CENTER ...................... 40 - 38

5G19 INTERMEDIATE SHAFT MOUNTING, CYLINDER 2C21 L.H. MAIN WIRING HARNESS, FRONT.......................... 40 - 36

DRIVE, DUAL-RANGE.................................................. 121 -42 2C19 L.H. MAIN WIRING HARNESS, L.H. FRONT.................. 40 - 34

5G21 INTERMEDIATE SHEAVE, CYLINDER DRIVE, 3J1 L.H. SERVICE ACCESS SHIELD .................................... 80 - 42

DUAL-RANGE .............................................................. 121 -44 3C7 L.H. STEERING LINES .................................................... 60 - 24

4C1 LADDER AND HANDRAIL, OPERATOR’S PLATFORM 90 - 18

3I1 LADDER AND LANDING, REAR...................................... 80 - 18

J 4C3 LADDER AND LATCH, OPERATOR’S PLATFORM ...... 90

3I3 LADDER LANDING LATCH ARM, REAR ........................ 80 - 20

1C7 JETS, PISTON COOLING (6076) .................................... 26 - 4 2E5 LAMPS, LICENSE PLATE

(EXPORT) .................................................................... 40 - 68

3I1 LANDING AND LADDER, REAR...................................... 80 - 18

K 4C9 LANDING AND MIRROR, CAB (L.H.)

( -650400) .............................................................. 90 - 26

6C5 KEY STOCK, METRIC KIT .............................................. 125 -22 4C13 LANDING AND MIRROR, CAB (R.H.) ............................ 90 - 30

6E20 KEY STOCK, METRIC KIT .............................................. 125 -88 4C11 LANDING AND MIRROR, CAB, L.H.

1C19 KEY. DAMPER (6076) ...................................................... 26 - 16 (650401- ) .............................................................. 90 - 28

1C15 KIT(S), ENGINE OVERHAUL 3I3 LANDING LATCH ARM, REAR LADDER ........................ 80 - 20

(ESN 500000- )...................................................... 26 - 12 4C3 LATCH AND LADDER, OPERATOR’S PLATFORM ...... 90 - 20

1C15 KIT(S), EXPANDED ENGINE OVERHAUL 4G20 LATCH HANDLE, FEED PLATE ...................................... 110 -38

(ESN 500000- )...................................................... 26 - 12 4B18 LATCH, CAB DOOR ........................................................ 90 - 10

2C7 KIT, AIR CONDITIONER PRESSURIZER FAN 6G5 LATCH, GRAIN TANK CLEAN OUT CHUTE .................. 130 -34

(640401-650400) .......................................................... 40 - 22 5C19 LATCHES, HANDLE, SHOE GRAIN SUPPLY AUGER

4D12 KIT, AIR SUSPENSION SEAT CLEANOUT DOOR ...................................................... 120 -36

(665401- ) .............................................................. 90 - 54 5D11 LEAK KIT, GRAIN ............................................................ 120 -54

4D14 KIT, AIR SUSPENSION SEAT 2D21 LEVEL MONITOR HARNESS, DUAL, GRAIN TANK ...... 40 - 60

(665401- ) .............................................................. 90 - 56 2D5 LEVEL MONITOR, GRAIN TANK .................................... 40 - 44

4D16 KIT, AIR SUSPENSION SEAT 2G16 LEVER AND LINKAGE, GEARSHIFT.............................. 50 - 12

(665401- ) .............................................................. 90 - 58 4C19 LEVER AND LINKAGE, GEARSHIFT .............................. 90 - 36

4D18 KIT, AIR SUSPENSION SEAT 2E5 LICENSE PLATE LAMPS

(665401- ) .............................................................. 90 - 60 (EXPORT) .................................................................... 40 - 68

3F18 KIT, ARMATURE, SOLENOID CONTROL VALVE, 1D5 LIFT STRAPS, ENGINE.................................................... 26 - 28

AUGER SWING ............................................................ 70 - 62 2E4 LIGHT SWITCH, SHOE ADJUSTING .............................. 40 - 67

4F3 KIT, CAB HARDWARE .................................................... 90 - 96 2B11 LIGHT, CAB DOME .......................................................... 40 - 1

4E18 KIT, COMPRESSOR HARDWARE 2D5 LIGHT, GRAIN TANK........................................................ 40 - 44

( -650400) R-12 .................................................... 90 - 86 2D21 LIGHT, UNLOADING AUGER, GRAIN TANK.................. 40 - 60

4E23 KIT, COMPRESSOR HARDWARE 2B20 LIGHTING, AUXILIARY, FIELD ........................................ 40 - 10

(650401- ) R134A .................................................. 90 - 92 2E21 LIGHTS REAR (EXPORT ONLY) .................................... 40 - 84

2F16 KIT, ELECTRICAL CONNECTOR SERVICE .................. 40 - 104 2B18 LIGHTS, CAB ROOF ........................................................ 40 - 8

2F18 KIT, ELECTRICAL CONNECTOR SERVICE .................. 40 - 106 2B19 LIGHTS, FRONT AND REAR TAIL .................................. 40 - 9

5D11 KIT, GRAIN LEAK ............................................................ 120 -54 2B19 LIGHTS, FRONT AND REAR TURN .............................. 40 - 9

CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00) 10-21

- 20

PN=21

1A23

CTS COMBINE (NORTH AMERICAN VERSION)

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

2E23 LIGHTS, HEADER, (EXPORT ONLY) .............................. 40 - 86 2I20 LINES, OIL, HYDROSTATIC DRIVE, LOWER

2D23 LIGHTS, SIDE FINDER, L.H. AND R.H........................... 40 - 62 (FOUR WHEEL DRIVE) (655401- ) ...................... 50 - 66

2F8 LIGHTS, TRANSPORT WARNING .................................. 40 - 96 2I18 LINES, OIL, HYDROSTATIC DRIVE, LOWER

2E19 LIGHTS,REVOLVING BEACON (EXPORT ONLY).......... 40 - 82 (TWO WHEEL DRIVE) (655401- )........................ 50 - 64

2D5 LIMIT SWITCH, GRAIN TANK ........................................ 40 - 44 2I12 LINES, OIL, HYDROSTATIC DRIVE, LOWER

3E19 LINE, HOSE AND MOUNTING, ONE-HALF GALLON (2&4 WHEEL DRIVE)( -655400) .......................... 50 - 58

DUAL ACCUMULATOR ( -655400)...................... 70 - 38 2I14 LINES, OIL, HYDROSTATIC DRIVE, LOWER

1E3 LINE, INJECTION PUMP LUBE (2&4 WHEEL DRIVE)( -655400) .......................... 50 - 60

(6076HH030) (EARLY DESIGN) .................................. 26 - 56 3F7 LINES, PRESSURE, HYDRAULIC .................................. 70 - 50

1E5 LINE, INJECTION PUMP LUBE (ROBERT BOSCH) 3E23 LINES, RETURN, HYDRAULIC

(6076HH030, HH034) (LATE DESIGN) ...................... 26 - 58 ( -655400) .............................................................. 70 - 42

1C18 LINER O-RINGS (6076).................................................... 26 - 15 3F1 LINES, RETURN, HYDRAULIC

1C18 LINER SHIM (6076) .......................................................... 26 - 15 (655401- ) .............................................................. 70 - 44

1C18 LINERS, CYLINDER (6076).............................................. 26 - 15 3C9 LINES, STEERING R.H. SIDE ........................................ 60 - 26

6D9 LINES AND FITTINGS, CHAFF SPREADER .................. 125 -52 3C7 LINES, STEERING, L.H. .................................................. 60 - 24

6D15 LINES AND HOSES, CHAFF SPREADER 1F6 LINES, TANK FUEL .......................................................... 30 - 6

(DUAL MOTOR) (650401- ).................................. 125 -58 1D20 LINES, TURBOCHARGER OIL

2J9 LINES AND HOSES, FOUR WHEEL DRIVE .................. 50 - 80 (ESN 500000- )...................................................... 26 - 48

2J5 LINES AND HOSES, FOUR WHEEL DRIVE 2G16 LINKAGE AND LEVER, GEARSHIFT .............................. 50 - 12

HYDRAULIC, L.H. ( -655400) ............................ 50 - 76 4C19 LINKAGE AND LEVER, GEARSHIFT .............................. 90 - 36

2J7 LINES AND HOSES, FOUR WHEEL DRIVE HYDRAU 5H13 LINKAGE, SHEAVE, FAN DRIVE SPEED CONTROL.... 121 -60

LIC, L.H. (655401- ) .......................................... 50 - 78 5H9 LINKAGE, SPEED CONTROL, FAN DRIVE

3E9 LINES AND HOSES, HEADER LIFT HYDRAULIC ........ 70 - 28 ( -655400) .............................................................. 121 -56

3F9 LINES AND HOSES, HYDRAULIC, CYLINDER 5H11 LINKAGE, SPEED CONTROL, FAN DRIVE

SPEED.......................................................................... 70 - 52 (655401- ) .............................................................. 121 -58

3D17 LINES AND HOSES, HYDRAULIC, REEL DRIVE, 6F13 LOADING AUGER, CLEAN GRAIN ................................ 130 -16

FRONT .......................................................................... 70 - 12 6F15 LOADING AUGER, CLEAN GRAIN, FOLD

3E5 LINES AND HOSES, HYDRAULIC, REEL FORE- (660401- ) ............................................................ 130 -18

AND-AFT, FRONT ........................................................ 70 - 24 2H20 LOBE MOTOR, CAM ........................................................ 50 - 41

3D19 LINES AND HOSES, HYDRAULIC, REEL PUMP .......... 70 - 14 4G11 LOCKOUT ADAPTER KIT - CONTOUR MASTER

3D21 LINES AND HOSES, HYDRAULIC, REEL PUMP .......... 70 - 16 (BELT PU & 4R CORN HEADS)(660401-) ................ 110 -28

2J1 LINES AND HOSES, OIL COOLER, HYDROSTATIC 5G15 LOCKOUT ARM, DUAL-RANGE ...................................... 121 -38

( -665400) .............................................................. 50 - 72 4G9 LOCKOUT ASSEMBLY - CONTOUR MASTER

2J3 LINES AND HOSES, OIL COOLER, HYDROSTATIC (OPTIONAL) (660401- ) ........................................ 110 -26

(665401- ) .............................................................. 50 - 74 2C23 LOGIC MODULE .............................................................. 40 - 38

3G21 LINES AND HOSES, OIL COOLER, WET CLUTCH 2D3 LOGIC MODULE .............................................................. 40 - 42

( -665400) .............................................................. 70 - 92 1C9 LONGBLOCK, "COMPLETE BLOCK ASSEMBLY"

3G23 LINES AND HOSES, OIL COOLER, WET CLUTCH (ESN 500000- )...................................................... 26 - 6

(665401- ) .............................................................. 70 - 94 2C10 LOW SHAFT SPEED SENSORS AND BRACKETS ...... 40 - 25

2I16 LINES AND HOSES, OIL, HYDROSTATIC DRIVE, 6C12 LOWER CURTAIN, STRAW SPREADER........................ 125 -30

LOWER (TWO WHEEL DRIVE)(655401- ) .......... 50 - 62 6C3 LOWER DOOR, STRAW CHOPPER .............................. 125 -20

3D9 LINES AND HOSES, REEL DRIVE, HYDRAULIC, 2E11 LOWER HARNESS CONNECTORS FOR 6076 ENGINE 40 - 74

L.H. SIDE ( -655400) .......................................... 70 - 4 2D15 LOWER HARNESS FOR 6076 ENGINE ........................ 40 - 54

3D10 LINES AND HOSES, REEL DRIVE, HYDRAULIC, 2I20 LOWER HYDROSTATIC DRIVE OIL LINES AND

L.H. SIDE (655401- ) .......................................... 70 - 5 HOSES (FOUR WHEEL DRIVE)(655401- ) .......... 50 - 66

3E3 LINES AND HOSES, REEL LIFT .................................... 70 - 22 2I16 LOWER HYDROSTATIC DRIVE OIL LINES AND

3C5 LINES AND HOSES, STEERING, FRONT ...................... 60 - 22 HOSES (TWO WHEEL DRIVE)(655401- ) .......... 50 - 62

3C11 LINES AND HOSES, STEERING, REAR ........................ 60 - 28 2I18 LOWER HYDROSTATIC DRIVE OIL LINES AND

3G7 LINES AND HOSES, UNLOADING AUGER SWING HOSES (TWO WHEEL DRIVE)(655401- ) ............ 50 - 64

HYDRAULIC CYLINDER .............................................. 70 - 78 2I12 LOWER HYDROSTATIC DRIVE OIL LINES AND

3E13 LINES AND HOSES, UPPER RETURN, HYDRAULIC HOSES (2&4 WHEEL DRIVE)( -655400) ............ 50 - 58

RESERVOIR ................................................................ 70 - 32 2I14 LOWER HYDROSTATIC DRIVE OIL LINES AND

1E11 LINES, FUEL FILTER (6076HH030, HH034) .................. 26 - 64 HOSES (2&4 WHEEL DRIVE)( -655400) .............. 50 - 60

1E1 LINES, FUEL INJECTION (6076HH030 OR 3C3 LOWER STEERING COLUMN ........................................ 60 - 20

HH034) .......................................................................... 26 - 54 4E4 LOWER STEERING COLUMN ........................................ 90 - 72

1E5 LINES, FUEL LEAK-OFF (ROBERT BOSCH) 6H21 LOWER TAILINGS AUGER BELT .................................. 170 -5

(6076HH030, HH034) (LATE DESIGN) ...................... 26 - 58 6E2 LOWER TAILINGS AUGER CHAIN TIGHTENER .......... 125 -70

1E1 LINES, FUEL LEAK-OFF (6076HH030 OR 6E4 LOWER TAILINGS AUGER DRIVE TIGHTENER .......... 125 -72

HH034) .......................................................................... 26 - 54 6D19 LOWER TAILINGS AUGER SHAFT AND TIGHTENER 125 -62

1E3 LINES, FUEL LEAK-OFF (6076HH030) 6D21 LOWER TAILINGS AUGER TROUGH ............................ 125 -64

(EARLY DESIGN) ........................................................ 26 - 56 6E1 LOWER TROUGH SUPPORT AND TAILINGS DRIVE

6D11 LINES, HOSES, VALVE AND PUMP, CHAFF BRACKET...................................................................... 125 -69

SPREADER .................................................................. 125 -54 6H9 LUBE BANK, UNLOADING AUGER ................................ 130 -64

3E7 LINES, HYDRAULIC, REEL FORE-AND-AFT, 6E18 LUBE HOSES L. H. .......................................................... 125 -86

L.H. SIDE ...................................................................... 70 - 26 6E16 LUBE HOSES R. H........................................................... 125 -84

6D13 LINES, MOTOR AND HOSES, CHAFF SPREADER 5E16 LUBE LINES AND BEARING, MODULE FRONT............ 120 -84

( -650400) .............................................................. 125 -56 2G18 LUBE PUMP, TRANSMISSION INPUT SHAFT .............. 50 - 14

10-22 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00)

PN=22

1A24

CTS COMBINE (NORTH AMERICAN VERSION)

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

M 3E19 MOUNTING AND ONE-HALF GALLON DUAL

ACCUMULATOR ( -655400) ................................ 70 - 38

1E22 MAGNETIC PICK-UP ........................................................ 26 - 75 6D3 MOUNTING SUPPORT, CHAFF SPREADER ................ 125 -46

1C7 MAIN BEARING CAPS .................................................... 26 - 4 2E15 MOUNTING SUPPORT, ELECTRONIC CONTROL

1C20 MAIN BEARINGS (6076) .................................................. 26 - 17 UNIT .............................................................................. 40 - 78

3D13 MAIN HYDRAULIC FILTER ASSEMBLY ........................ 70 - 8 3I7 MOUNTING TRACKS AND SUPPORTS, MODULE ...... 80 - 24

6H13 MAIN VALVE BLOCK SOLENOID 3G9 MOUNTING, GRAIN TANK UNLOADING DRIVE

DIAL-A-MATIC HEADER HEIGHT CONTROL ............ 160 -3 CYLINDER .................................................................... 70 - 80

2H25 MANIFOLD AND PACKING.............................................. 50 - 46 3E21 MOUNTING, ONE GALLON ACCUMULATOR

4E21 MANIFOLD, A/C COMPRESSOR (655401- ) .............................................................. 70 - 40

(650401- ) R134A .................................................. 90 - 90 3E17 MOUNTING, ONE HALF GALLON SINGLE

1D24 MANIFOLD, EXHAUST .................................................... 26 - 52 ACCUMULATOR .......................................................... 70 - 36

1D18 MANIFOLD, INTAKE (EARLY DESIGN) .......................... 26 - 45 3G11 MOUNTING, UNLOADING AUGER SWING

1D19 MANIFOLD, INTAKE (LATE DESIGN) ............................ 26 - 46 CYLINDER.................................................................... 70 - 82

1D15 MANIFOLD, WATER, FRONT .......................................... 26 - 42 3G13 MOUNTING, UNLOADING AUGER SWING

3B15 MASTER CYLINDER, BRAKE .......................................... 60 - 8 CYLINDER (650401-655551) ...................................... 70 - 84

3B13 MASTER CYLINDER, RESERVOIR AND BRAKE 3G15 MOUNTING, UNLOADING AUGER SWING

LINES ............................................................................ 60 - 6 HYDRAULIC (655552- )........................................ 70 - 86

3B11 MASTER CYLINDERS ...................................................... 60 - 4 3G1 MOUNTINGS, SIX STACK SOLENOID CONTROL

4B10 MAT, FLOOR, AND CAB PANELS .................................. 90 - 2 VALVE (660401- ) ................................................ 70 - 72

6C5 METRIC KEY STOCK KIT................................................ 125 -22 3F23 MOUNTINGS, SOLENOID CONTROL VAVLE

6E20 METRIC KEY STOCK KIT ................................................ 125 -88 MODULE ASSEMBLY .................................................. 70 - 68

4C9 MIRROR AND LANDING, CAB (L.H.) 1B18 MOUNTS, ENGINE (655401- ) .................................. 20 - 12

( -650400) .............................................................. 90 - 26 3I19 MUD AND FAN DRIVE SHIELDS (L-H SIDE) ................ 80 - 36

4C13 MIRROR AND LANDING, CAB (R.H.) ............................ 90 - 30 2I11 MUD SHIELDS .................................................................. 50 - 57

4C11 MIRROR AND LANDING, CAB, L.H. 3J9 MUD SHIELDS (R.H. SIDE) ............................................ 80 - 50

(650401- ) .............................................................. 90 - 28 1F14 MUFFLER AND EXHAUST PIPES .................................. 30 - 14

5E9 MODULE ASSEMBLY (655542- ) .............................. 120 -76

5E12 MODULE CRANK OUT SYSTEM .................................... 120 -80

5F7 MODULE DRIVE GEARCASE, L.H. ................................ 121 -6 N

5F5 MODULE DRIVE GEARCASE, R.H. ................................ 121 -4

5F9 MODULE DRIVES, ENGINE GEARCASE ...................... 121 -8 1E9 NOZZLE, FUEL INJECTION (DENSO)

5F11 MODULE DRIVES, ENGINE GEARCASE ...................... 121 -10 (HH030 OR HH034)...................................................... 26 - 62

5E14 MODULE FRAME AND COVERS .................................... 120 -82 1E1 NOZZLES, FUEL INJECTION (6076HH030 OR

5E16 MODULE FRONT BEARING AND LUBE LINES ............ 120 -84 HH034) .......................................................................... 26 - 54

5F3 MODULE GEARBOX, SHAFT AND COUPLING ............ 121 -2

5E18 MODULE GRATE ASSEMBLY, FINGER BAR AND

FILLER PLATE.............................................................. 120 -86 O

3I7 MODULE MOUNTING TRACKS AND SUPPORTS ........ 80 - 24

3H9 MODULE RAILS, TINE SEPARATOR.............................. 80 - 2 1C18 O-RINGS, LINER (6076) .................................................. 26 - 15

5E10 MODULE REAR SHIELDS .............................................. 120 -78 1B22 OIL COOLER .................................................................... 20 - 16

6J17 MODULE SAFETY DECALS, SEPARATOR.................... 170 -51 3H1 OIL COOLER AND A/C CONDENSER............................ 70 - 96

5E20 MODULE TINE SEPARATORS ........................................ 120 -88 1D9 OIL COOLER GASKET .................................................... 26 - 34

2D1 MODULE WIRING HARNESS .......................................... 40 - 40 2J1 OIL COOLER LINES AND HOSES, HYDROSTATIC

2E17 MODULE, CENTRAL ELECTRONICS ............................ 40 - 80 ( -665400) .............................................................. 50 - 72

2C23 MODULE, LOGIC .............................................................. 40 - 38 2J3 OIL COOLER LINES AND HOSES, HYDROSTATIC

2D3 MODULE, LOGIC .............................................................. 40 - 42 (665401- ) .............................................................. 50 - 74

3G1 MODULE, SIX STACK SOLENOID CONTROL VALVE 3G21 OIL COOLER LINES AND HOSES, WET CLUTCH

ASSEMBLY & MOUNTINGS (660401- ) .............. 70 - 72 ( -665400) .............................................................. 70 - 92

2D9 MONITOR AND WIRING HARNESS, HARVESTRAK .... 40 - 48 3G23 OIL COOLER LINES AND HOSES, WET CLUTCH

2D21 MONITOR HARNESS, DUAL LEVEL, GRAIN TANK...... 40 - 60 (665401- ) .............................................................. 70 - 94

2D5 MONITOR, LEVEL, GRAIN TANK.................................... 40 - 44 1B20 OIL DRAIN, ENGINE CRANKCASE ................................ 20 - 14

2F2 MOTOR AND BRACKET, REEL SPEED ........................ 40 - 90 3H3 OIL FILTER ASSEMBLY, ENGINE GEARCASE ............ 70 - 98

2H19 MOTOR KIT, HYDROSTATIC DRIVE .............................. 50 - 40 1D9 OIL FILTER BYPASS VALVE .......................................... 26 - 34

2H14 MOTOR VALVE, HYDROSTATIC .................................... 50 - 35 1D9 OIL FILTER HOUSING GASKET .................................... 26 - 34

2H20 MOTOR, CAM LOBE ........................................................ 50 - 41 1D9 OIL FILTER, ENGINE ...................................................... 26 - 34

3D14 MOTOR, CHAFF SPREADER 2I20 OIL HOSES, HYDROSTATIC DRIVE, LOWER

(EATON) (655929- ) .............................................. 70 - 9 (FOUR WHEEL DRIVE) (655401- ) ...................... 50 - 66

2D18 MOTOR, CONCAVE ADJUSTING.................................... 40 - 57 2I18 OIL HOSES, HYDROSTATIC DRIVE, LOWER

6D13 MOTOR, HOSES AND LINES, CHAFF SPREADER (TWO WHEEL DRIVE) (655401- )........................ 50 - 64

( -650400) .............................................................. 125 -56 2I12 OIL HOSES, HYDROSTATIC DRIVE, LOWER

2H17 MOTOR, HYDROSTATIC DRIVE .................................... 50 - 38 (2&4 WHEEL DRIVE)( -655400) ............................ 50 - 58

2J11 MOTOR, HYDROSTATIC DRIVE .................................... 50 - 82 2I14 OIL HOSES, HYDROSTATIC DRIVE, LOWER

2D20 MOTOR, SEPARATOR FAN DRIVE, ADJUSTING ........ 40 - 59 (2&4 WHEEL DRIVE)( -655400) ............................ 50 - 60

1E18 MOTOR, STARTING (DENSO) 2I22 OIL HOSES, UPPER, HYDROSTATIC DRIVE

(12V F4) ........................................................................ 26 - 71 ( -655400) .............................................................. 50 - 68

CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00) 10-23

PN=23

1A25

CTS COMBINE (NORTH AMERICAN VERSION)

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

2I16 OIL LINES AND HOSES, HYDROSTATIC DRIVE, 3B9 PARKING BRAKE PEDAL AND SEAL ............................ 60 - 2

LOWER (TWO WHEEL DRIVE)(655401- ) .......... 50 - 62 4D4 PASSENGER SEAT SEATBELT ...................................... 90 - 45

2I20 OIL LINES HYDROSTATIC DRIVE, LOWER 3B9 PEDAL, PARKING BRAKE .............................................. 60 - 2

(FOUR WHEEL DRIVE) (655401- ) ...................... 50 - 66 3B11 PEDALS, BRAKE .............................................................. 60 - 4

2I18 OIL LINES HYDROSTATIC DRIVE, LOWER 1E22 PICK-UP, MAGNETIC ...................................................... 26 - 75

(TWO WHEEL DRIVE) (655401- ) ........................ 50 - 64 3G5 PICKUP DRIVE PUMP, REEL/BELT................................ 70 - 76

2I14 OIL LINES HYDROSTATIC DRIVE, LOWER 2G20 PINION SHAFT, TRANSMISSION.................................... 50 - 16

(2&4 WHEEL DRIVE)( -655400) .......................... 50 - 60 2H3 PINION, FINAL DRIVE...................................................... 50 - 24

2I12 OIL LINES, HYDROSTATIC DRIVE, LOWER 1F14 PIPES, MUFFLER AND EXHAUST.................................. 30 - 14

(2&4 WHEEL DRIVE)( -655400) ............................ 50 - 58 2H11 PISTON ASSEMBLY, HYDROSTATIC DRIVE ................ 50 - 32

1D20 OIL LINES, TURBOCHARGER 1C7 PISTON COOLING JETS (6076)...................................... 26 - 4

(ESN 500000- )...................................................... 26 - 48 1C18 PISTON RINGS (6076) (ESN 500000- ) .................. 26 - 15

1D11 OIL PAN ............................................................................ 26 - 36 1C18 PISTON/LINER KIT(6076)

1D11 OIL PAN DRAIN VALVE .................................................. 26 - 36 (ESN 500000- )...................................................... 26 - 15

1D11 OIL PAN GASKET ............................................................ 26 - 36 1C18 PISTON, ENGINE (6076)(ESN 500000- ) ................ 26 - 15

1D9 OIL PRESSURE REGULATING VALVE .......................... 26 - 34 2I2 PISTONS, CAM AND CARRIER ...................................... 50 - 48

1D6 OIL PUMP DRIVE GEAR ................................................ 26 - 30 5H5 PIVOT ARM DRIVE TIGHTENER, CLEANING SHOE

1C19 OIL PUMP DRIVE GEAR (6076)...................................... 26 - 16 AND CONVEYOR AUGER .......................................... 121 -52

1D8 OIL PUMP INTAKE GASKET .......................................... 26 - 32 2I4 PIVOTS, CAPS AND YOKE ............................................ 50 - 50

3E16 OIL RESERVOIR AND MOUNTINGS, HYDRAULIC/ 6G24 PLATE, CROSS AUGER BEARING, L.H......................... 130 -52

HYDROSTATIC ............................................................ 70 - 35 4G7 PLATES, CLOSURE, FEEDER HOUSE - CONTOUR

1C23 OIL SEAL, CRANKSHAFT FRONT (6076) ...................... 26 - 20 MASTER (660401- ) .............................................. 110 -24

1C21 OIL SEAL, REAR (6076) .................................................. 26 - 18 4G5 PLATES, WEAR, FEEDER HOUSE - CONTOUR

4E21 OIL, A/C COMPRESSOR MASTER (660401- ) .............................................. 110 -22

(650401- ) R134A .................................................. 90 - 90 3H23 PLATFORM AND STEP, ENGINE ACCESS .................. 80 - 16

3E21 ONE GALLON ACCUMULATOR AND MOUNTING 3H17 PLATFORM, ENGINE ...................................................... 80 - 10

(655401- ) .............................................................. 70 - 40 3D16 PLATFORM, 200 SERIES CUTTING, CONVERSION

3E17 ONE HALF GALLON SINGLE ACCUMULATOR AND PARTS .......................................................................... 70 - 11

MOUNTING .................................................................. 70 - 36 3E1 PLUMBING, FEEDERHOUSE - EXPORT........................ 70 - 20

3E19 ONE-HALF GALLON DUAL ACCUMULATOR, HOSE, 2B16 POST INSTRUMENT PANEL, CAB ................................ 40 - 6

LINE AND MOUNTING ( -655400) ...................... 70 - 38 4C17 POST INSTRUMENT PANEL, CAB ................................ 90 - 34

4C1 OPERATOR’S PLATFORM LADDER AND HANDRAIL .. 90 - 18 5D9 PRECLEANER CHAFFER FRAME .................................. 120 -52

4C3 OPERATOR’S PLATFORM LADDER AND LATCH ........ 90 - 20 5D13 PRECLEANER CHAFFER FRAME ARMS ...................... 120 -56

4D1 OPERATOR’S SEAT AND BACKREST .......................... 90 - 42 5D5 PRECLEANING CHAFFER

4D3 OPERATOR’S SEAT SEATBELT .................................... 90 - 44 ( -655400) .............................................................. 120 -48

2H21 OUTER COVER, BEARINGS, SEALS AND SHAFT 5D7 PRECLEANING CHAFFER (655401- ) ...................... 120 -50

CAM LOBE MOTOR .................................................... 50 - 42 3D7 PRESSURE GAUGE, ACCUMULATOR .......................... 70 - 2

2F6 OUTLET, CONVENIENCE 3F3 PRESSURE HOSE, CHARGE .......................................... 70 - 46

(660401- ) .............................................................. 40 - 94 3F5 PRESSURE REGULATOR, ENGINE GEARCASE.......... 70 - 48

2F5 OUTLET, ELECTRICAL SERVICE .................................. 40 - 93 3F7 PRESSURE, HYDRAULIC, LINES AND HOSES ............ 70 - 50

1C15 OVERHAUL KIT(S), ENGINE 4E8 PRESSURIZER AND AIR CONDITIONING/

(ESN 500000- )...................................................... 26 - 12 HEATER FAN .............................................................. 90 - 76

2B14 OVERHEAD CONSOLE PANEL ...................................... 40 - 4 5G3 PRIMARY COUNTERSHAFT GEARCASE ...................... 121 -26

5G5 PRIMARY COUNTERSHAFT GEARCASE ...................... 121 -28

5G1 PRIMARY COUNTERSHAFT, DRIVE SHAFT AND

P GEARCASE MOUNTING ............................................ 121

5G9 PRIMARY COUNTERSHAFT, SUPPORTS AND VARI-

2H25 PACKING AND MANIFOLD.............................................. 50 - 46 ABLE SHEAVE ............................................................ 121 -32

6E6 PADDLE ASSEMBLY AND HOUSING, UPPER 4E22 PULLEY, A/C COMPRESSOR

TAILINGS AUGER ........................................................ 125 -74 (650401- ) R134A .................................................. 90 - 91

1D11 PAN, OIL .......................................................................... 26 - 36 4E16 PULLEY, COMPRESSOR

6C24 PAN, SEALS, CHAFF SPREADER (BELT TYPE) ( -650400) R-12 .................................................... 90 - 84

( -650400) .............................................................. 125 -42 5H1 PULLEY, SECONDARY COUNTERSHAFT DRIVE ........ 121 -48

5E3 PAN, SHAKER 5F21 PUMP AND SEPARATOR DRIVE, ENGINE

( -655400) .............................................................. 120 -70 GEARCASE .................................................................. 121 -20

5E5 PAN, SHAKER 5F23 PUMP DRIVE AND SEPARATOR, GEARCASE ............ 121 -22

(655401-665400) .......................................................... 120 -72 5F17 PUMP DRIVE SHAFT AND SEPARATOR DRIVE

5E7 PAN, SHAKER WET-CLUTCH, GEARCASE ........................................ 121 -16

(665401- ) .............................................................. 120 -74 6D17 PUMP, CHAFF SPREADER ............................................ 125 -60

6D1 PAN, WINGS AND SEALS, CHAFF SPREADER 2H5 PUMP, DRIVE, HYDROSTATIC ...................................... 50 - 26

(DUAL MOTOR) (650401- ).................................. 125 -44 1D6 PUMP, ENGINE OIL ........................................................ 26 - 30

2B24 PANEL, ARMREST CONTROL ........................................ 40 - 14 1F4 PUMP, FUEL .................................................................... 30 - 4

2B16 PANEL, CAB POST INSTRUMENT ................................ 40 - 6 1E5 PUMP, FUEL INJECTION (ROBERT BOSCH)

4C17 PANEL, CAB POST INSTRUMENT ................................ 90 - 34 (6076HH030, HH034) (LATE DESIGN) ...................... 26 - 58

2B14 PANEL, OVERHEAD CONSOLE...................................... 40 - 4 1E3 PUMP, FUEL INJECTION (6076HH030)

4B10 PANELS AND FLOOR MAT, CAB .................................. 90 - 2 (EARLY DESIGN) ........................................................ 26 - 56

4B16 PANELS, CAB INTERIOR TRIM ...................................... 90 - 8

10-24 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00)

-24

PN=24

1B1

CTS COMBINE (NORTH AMERICAN VERSION)

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

1E8 PUMP, FUEL TRANSFER (ROBERT BOSCH) 3D9 REEL DRIVE HYDRAULIC LINES AND HOSES

(6076HH030, HH034) .................................................. 26 - 61 L.H. SIDE ( -655400) ............................................ 70 - 4

2H12 PUMP, HYDROSTATIC DRIVE CHARGE ...................... 50 - 33 3D10 REEL DRIVE HYDRAULIC LINES AND HOSES

2H13 PUMP, HYDROSTATIC DRIVE CHARGE L.H. SIDE (655401- ) ............................................ 70 - 5

(RING AND PINION).................................................... 50 - 34 3D17 REEL DRIVE HYDRAULIC LINES AND HOSES,

6D11 PUMP, LINES, HOSES AND VALVE, CHAFF FRONT.......................................................................... 70 - 12

SPREADER .................................................................. 125 -54 3E5 REEL FORE-AND-AFT HYDRAULIC LINES AND

3G3 PUMP, MAIN HYDRAULIC .............................................. 70 - 74 HOSES, FRONT .......................................................... 70 - 24

3D19 PUMP, REEL, HYDRAULIC LINES AND HOSES .......... 70 - 14 3E7 REEL FORE-AND-AFT HYDRAULIC LINES, L.H.

3D21 PUMP, REEL, HYDRAULIC LINES AND HOSES .......... 70 - 16 SIDE .............................................................................. 70 - 26

3B21 PUMP, STEERING ............................................................ 60 - 14 3F19 REEL FORE/AFT SOLENOID CONTROL VALVE

1D12 PUMP, WATER ................................................................ 26 - 38 (650401- ) .............................................................. 70 - 64

1D3 PUSH RODS .................................................................... 26 - 26 3F14 REEL LIFT AND CYLINDER SPEED, SOLENOID

CONTROL VALVE ........................................................ 70 - 58

3E3 REEL LIFT LINES AND HOSES ...................................... 70 - 22

Q 3D19 REEL PUMP HYDRAULIC LINES AND HOSES ............ 70

3D21 REEL PUMP HYDRAULIC LINES AND HOSES ............ 70 - 16

2I1 QUILL, BEARING AND COVER ...................................... 50 - 47 2F4 REEL SPEED CONTROL AND RELAYS (EXPORT

ONLY) .......................................................................... 40 - 92

2F2 REEL SPEED MOTOR AND BRACKET.......................... 40 - 90

R 5H17 REEL/BELT PICKUP CHARGE PUMP MOUNTING

AND SHEAVE .............................................................. 121 -64

2D3 R.H. MAIN WIRING HARNESS........................................ 40 - 42 5H18 REEL/BELT PICKUP CHARGE PUMP MOUNTING

3I23 R.H. SERVICE ACCESS SHIELD .................................... 80 - 40 AND SHEAVE .............................................................. 121 -65

3C9 R.H. SIDE STEERING LINES .......................................... 60 - 26 3G5 REEL/BELT PICKUP DRIVE PUMP ................................ 70 - 76

1F16 RADIATOR AND HOSES ................................................ 30 - 16 2E1 REGULATOR, ALTERNATOR AND VOLTAGE - BOSC

3H13 RADIATOR DOOR, ENGINE ACCESS DOOR, H .................................................................................... 40 - 64

HANDRAILS .................................................................. 80 - 6 3F5 REGULATOR, PRESSURE, ENGINE GEARCASE ........ 70 - 48

3H15 RADIATOR SHELL AND SEALS...................................... 80 - 8 2E9 RELAYS, ENGINE CIRCUIT BREAKER .......................... 40 - 72

1B22 RADIATOR WITH OIL COOLER ...................................... 20 - 16 2E6 RELAYS, ENGINE CIRCUIT BREAKER

2C17 RADIO, SPEAKERS AND ANTENNA .............................. 40 - 32 ( -660400) .............................................................. 40 - 69

3H9 RAILS, TINE SEPARTATOR MODULE .......................... 80 - 2 2E7 RELAYS, ENGINE CIRCUIT BREAKER

5B20 RASP BAR CONCAVE AND GRATE .............................. 120 -12 (660401- ) .............................................................. 40 - 70

5B18 RASP BAR THRESHING CYLINDER .............................. 120 -10 3F11 RELIEF VALVE MODULE, SOLENOID CONTROL ........ 70 - 54

4B14 REAR AND SIDE SEALS, CAB ...................................... 90 - 6 3F11 RELIEF VALVE, SOLENOID CONTROL - CONTOUR

3C18 REAR AXLE SPINDLE HOUSING .................................. 60 - 35 MASTER ...................................................................... 70 - 54

3C23 REAR AXLE SPINDLES .................................................. 60 - 40 1D14 REPAIR KIT, WATER PUMP (6076)................................ 26 - 40

3C15 REAR AXLE SUPPORT.................................................... 60 - 32 3E13 RESERVOIR HYDRAULIC UPPER RETURN LINES

3C14 REAR AXLE TRASH SHIELD .......................................... 60 - 31 AND HOSES ................................................................ 70 - 32

3C16 REAR AXLE, ADJUSTABLE ............................................ 60 - 33 3B13 RESERVOIR, BRAKE LINES AND MASTER

3C17 REAR AXLE, FIXED CYLINDER.................................................................... 60 - 6

(GRAIN) (655542- ) .............................................. 60 - 34 3E16 RESERVOIR, OIL, MOUNTINGS, HYDRAULIC/

3J5 REAR CORNER SHEET, L H .......................................... 80 - 46 HYDROSTATIC ............................................................ 70 - 35

3I5 REAR HOOD .................................................................... 80 - 22 2J15 RESERVOIR, RETURN LINE .......................................... 50 - 86

3I9 REAR HOOD ACCESS DOOR AND STOP .................... 80 - 26 4H11 RETROFIT INSTALLATION - LH SIDE

2D1 REAR HOOD AND MODULE WIRING HARNESSES .... 40 - 40 FEEDER HOUSE DUST FAN BELT............................ 110 -54

3I11 REAR HOOD DOOR ........................................................ 80 - 28 4H9 RETROFIT INSTALLATION-FEEDER CONVEYOR

3I1 REAR LADDER AND LANDING ...................................... 80 - 18 DRIVE CHAIN,TIGHTENER AND GUIDES ................ 110 -52

3I3 REAR LADDER LANDING LATCH ARM ........................ 80 - 20 4H13 RETROFIT INSTALLATION-LH SIDE

6E14 REAR LEFT SIDE TAILINGS SHIELD ............................ 125 -82 FEEDER HOUSE DUST FAN ...................................... 110 -56

2E21 REAR LIGHTS (EXPORT ONLY) .................................... 40 - 84 4D5 RETROFIT SEAT BELT KIT

1C21 REAR OIL SEAL (6076) .................................................. 26 - 18 (MACHINES PRIOR TO 1996 MODEL YEAR) .......... 90 - 46

1C21 REAR OIL SEAL GASKET (6076) .................................. 26 - 18 4H1 RETURN FLOOR, FEEDER HOUSE .............................. 110 -44

1C21 REAR OIL SEAL HOUSING (6076) ................................ 26 - 18 2J15 RETURN LINE, RESERVOIR .......................................... 50 - 86

5E10 REAR SHIELDS, MODULE .............................................. 120 -78 3E13 RETURN LINES AND HOSES, UPPER HYDRAULIC

3C11 REAR STEERING LINES AND HOSES .......................... 60 - 28 RESERVOIR ................................................................ 70 - 32

1B18 REAR SUPPORT, ENGINE MOUNTS 3E23 RETURN LINES, HYDRAULIC

(655401- ) .............................................................. 20 - 12 ( -655400) .............................................................. 70 - 42

6E14 REAR TAILINGS SHIELD, LEFT SIDE ............................ 125 -82 3F1 RETURN LINES, HYDRAULIC

6J13 REAR WHEEL DECALS .................................................. 170 -46 (655401- ) .............................................................. 70 - 44

3C22 REAR WHEELS ................................................................ 60 - 39 4C21 REVERSER FOOT CONTROL, FEEDER HOUSE.......... 90 - 38

3D1 REAR WHEELS AND WHEEL WEIGHTS ...................... 60 - 42 4F13 REVERSER FOOT CONTROL, FEEDER HOUSE.......... 110 -6

2D1 REAR, L.H. AND R.H. MAIN WIRING HARNESS .......... 40 - 40 4F11 REVERSER GEAR BOX .................................................. 110 -4

6H20 REEL BELTS .................................................................... 170 -4 4H5 REVERSER) ...................................................................... 110 -48

3D11 REEL DRIVE FLOW CONTROL VALVE ........................ 70 - 6 2E19 REVOLVING BEACON LIGHTS (EXPORT ONLY) ........ 40 - 82

6D7 REEL DRIVE FLOW CONTROL VALVE ........................ 125 -50 1C18 RINGS, PISTON (6076) (ESN 500000- ).................. 26 - 15

1D4 ROCKER ARM COVER .................................................... 26 - 27

CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00) 10-25

- 14

PN=25

1B2

CTS COMBINE (NORTH AMERICAN VERSION)

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

1D4 ROCKER ARM COVER GASKET .................................... 26 - 27 4B14 SEALS, REAR AND SIDE, CAB ...................................... 90 - 6

1D3 ROCKER ARM SHAFT .................................................... 26 - 26 2H21 SEALS, SHAFT, OUTER COVER AND BEARINGS

1D3 ROCKER ARMS................................................................ 26 - 26 CAM LOBE MOTOR .................................................... 50 - 42

6D5 ROD, KNOB, CONTROL AND CHECK VALVE, 3H15 SEALS, SHELL, RADIATOR ............................................ 80 - 8

CHAFF SPREADER .................................................... 125 -48 4D6 SEAT ADJUST FORE-AND-AFT ...................................... 90 - 48

1C18 RODS, CONNECTING (6076) .......................................... 26 - 15 4D1 SEAT AND BACKREST, OPERATOR’S .......................... 90 - 42

1D3 RODS, PUSH .................................................................... 26 - 26 4D5 SEAT BELT KIT, RETROFIT

3C19 RODS, TIE, STEERING.................................................... 60 - 36 (MACHINES PRIOR TO 1996 MODEL YEAR) .......... 90 - 46

3H9 ROLLERS, FRONT MODULE .......................................... 80 - 2 4D8 SEAT HEIGHT ADJUSTER, CAB .................................... 90 - 50

4B24 ROOF AND SUPPORTS, CAB ........................................ 90 - 16 4C23 SEAT SHROUDS AND TRAINING SEAT........................ 90 - 40

2B18 ROOF, CAB LIGHTS ........................................................ 40 - 8 4D10 SEAT, AIR SUSPENSION

6H19 ROTARY SCREEN BELTS .............................................. 170 -3 (660401- ) ................................................................ 90 - 52

1B10 ROTARY SCREEN DOOR AND SCREEN ...................... 20 - 4 4D12 SEAT, AIR SUSPENSION KITS

1B8 ROTARY SCREEN DRIVE .............................................. 20 - 2 (665401- ) .............................................................. 90 - 54

6B18 ROTOR STRAW CHOPPER, FINE CUT (PADDLED 4D14 SEAT, AIR SUSPENSION KITS

NARROW (670401- ) ............................................ 125 -10 (665401- ) .............................................................. 90 - 56

6B16 ROTOR STRAW CHOPPER, FINE CUT (STRAIGHT 4D16 SEAT, AIR SUSPENSION KITS

NARROW (670401- ) ............................................ 125 -8 (665401- ) .............................................................. 90 - 58

6B20 ROTOR, SHEAVE AND STRAW CHOPPER .................. 125 -12 4D18 SEAT, AIR SUSPENSION KITS

(665401- ) .............................................................. 90 - 60

2C5 SEAT, AIR, WIRING HARNESS

S (660401- ) .............................................................. 40

4D3 SEAT, OPERATOR’S SEATBELT .................................... 90 - 44

6H22 SAFETY DECALS AND LOCATIONS .............................. 170 -6 4D4 SEAT, SEATBELT - PASSENGER .................................. 90 - 45

6H24 SAFETY DECALS AND LOCATIONS .............................. 170 -8 4D3 SEATBELT, OPERATOR’S SEAT .................................... 90 - 44

6I1 SAFETY DECALS AND LOCATIONS .............................. 170 -10 4D4 SEATBELT, PASSENGER SEAT .................................... 90 - 45

6I3 SAFETY DECALS AND LOCATIONS .............................. 170 -12 5H1 SECONDARY COUNTERSHAFT DRIVE ........................ 121 -48

6I5 SAFETY DECALS AND LOCATIONS .............................. 170 -14 5H1 SECONDARY COUNTERSHAFT DRIVE PULLEY.......... 121 -48

6I7 SAFETY DECALS AND LOCATIONS .............................. 170 -16 2F10 SENSOR, BACKSHAFT SPEED, FEEDER HOUSE ...... 40 - 98

6I9 SAFETY DECALS AND LOCATIONS .............................. 170 -18 1E22 SENSOR, ENGINE SPEED .............................................. 26 - 75

6I11 SAFETY DECALS AND LOCATIONS - FRENCH .......... 170 -20 2F1 SENSOR, STUBBLE HEIGHT (EXPORT ONLY) ............ 40 - 89

6I13 SAFETY DECALS AND LOCATIONS - FRENCH .......... 170 -22 1E5 SENSOR, TEMPERATURE (6076HH030, HH034)

6I15 SAFETY DECALS AND LOCATIONS - FRENCH .......... 170 -24 (ROBERT BOSCH)(LATE DESIGN) ............................ 26 - 58

6I17 SAFETY DECALS AND LOCATIONS - FRENCH .......... 170 -26 2D7 SENSOR, UNLOADING AUGER

6I19 SAFETY DECALS AND LOCATIONS - FRENCH .......... 170 -28 (660401- ) .............................................................. 40 - 46

6I21 SAFETY DECALS AND LOCATIONS - ITALIAN ............ 170 -30 2C10 SENSORS AND BRACKETS, LOW SHAFT SPEED ...... 40 - 25

6J1 SAFETY DECALS AND LOCATIONS - ITALIAN ............ 170 -34 5F21 SEPARATOR AND PUMP DRIVE, ENGINE

6J3 SAFETY DECALS AND LOCATIONS - ITALIAN ............ 170 -36 GEARCASE .................................................................. 121 -20

6J5 SAFETY DECALS AND LOCATIONS - ITALIAN ............ 170 -38 5F23 SEPARATOR AND PUMP DRIVE, GEARCASE ............ 121 -22

6J7 SAFETY DECALS AND LOCATIONS - ITALIAN ............ 170 -40 5F13 SEPARATOR AND UNLOADING DRIVE GEAR,

4F23 SAFETY STOP, CONTOUR MASTER FEEDER HOUSE ENGINE GEARCASE .................................................. 121 -12

(660401-660432) .......................................................... 110 -16 5F15 SEPARATOR DRIVE GEAR, UNLOADING DRIVE

4G1 SAFETY STOP, CONTOUR MASTER FEEDER HOUSE AND STRAW CHOPPER, ENGINE GEARCASE........ 121 -14

(661186- ) .............................................................. 110 -18 3I13 SEPARATOR DRIVE SIDE SHIELDS.............................. 80 - 30

4F21 SAFETY STOP, DRIVE SHIELDS, FEEDER HOUSE .... 110 -14 5F17 SEPARATOR DRIVE WET-CLUTCH AND PUMP

6H7 SAMPLING TROUGH, GRAIN TANK .............................. 130 -62 DRIVE SHAFT, GEARCASE ........................................ 121 -16

1B8 SCREEN DRIVE, ROTARY .............................................. 20 - 2 5H7 SEPARATOR FAN DRIVE................................................ 121 -54

1B10 SCREEN, ROTARY DOOR .............................................. 20 - 4 2D20 SEPARATOR FAN DRIVE ADJUSTING MOTOR .......... 40 - 59

4E21 SEAL, A/C COMPRESSOR 3H11 SEPARATOR FRAME ...................................................... 80 - 4

(650401- ) R134A .................................................. 90 - 90 6J17 SEPARATOR MODULE SAFETY DECALS .................... 170 -51

4E24 SEAL, A/C COMPRESSOR KIT 5E20 SEPARATOR TINES, MODULE ...................................... 120 -88

(650401- ) R134A ................................................ 90 - 93 5B10 SEPARATOR/FEEDER HOUSE SEAL, STONE TRAP

2D11 SEAL, DEFLECTOR - LESS HARVESTRAK AND DOOR .................................................................. 120 -2

(655542- ) .............................................................. 40 - 50 3H9 SEPARATOR, MODULE RAILS ...................................... 80 - 2

1C23 SEAL, FRONT OIL (6076) ................................................ 26 - 20 1F4 SEPARATOR, WATER .................................................... 30 - 4

3B9 SEAL, PARKING BRAKE PEDAL .................................... 60 - 2 3J1 SERVICE ACCESS SHIELD, L.H..................................... 80 - 42

1C21 SEAL, REAR OIL (6076) .................................................. 26 - 18 3I23 SERVICE ACCESS SHIELD, R.H. .................................. 80 - 40

5B10 SEAL, STONE TRAP AND DOOR, SEPARATOR/ 2F16 SERVICE KIT, ELECTRICAL CONNECTORS ................ 40 - 104

FEEDER HOUSE.......................................................... 120 -2 2F18 SERVICE KIT, ELECTRICAL CONNECTORS ................ 40 - 106

1D12 SEAL, WATER PUMP ...................................................... 26 - 38 2F5 SERVICE OUTLET, ELECTRICAL .................................. 40 - 93

4G5 SEALS, FEEDER HOUSE - CONTOUR MASTER 2H9 SERVO CYLINDERS, HYDROSTATIC DRIVE PUMP.... 50 - 30

(660401- ) .............................................................. 110 -22 4E18 SET, COMPRESSOR HARDWARE

4B12 SEALS, FOAM, SOUND DEADENING, CAB .................. 90 - 4 ( -650400) R-12 .................................................... 90 - 86

6D1 SEALS, PAN AND WINGS, CHAFF SPREADER 6D19 SHAFT AND TIGHTENER, LOWER TAILINGS

(DUAL MOTOR) (650401- ).................................. 125 -44 AUGER.......................................................................... 125 -62

6C24 SEALS, PAN, CHAFF SPREADER (BELT TYPE) 5F3 SHAFT, COUPLING AND GEARBOX, MODULE ............ 121 -2

( -650400) .............................................................. 125 -42

10-26 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00)

- 20

PN=26

1B3

CTS COMBINE (NORTH AMERICAN VERSION)

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

4H5 SHAFT, DRIVE, FRONT, SHEAVE AND 2E4 SHOE ADJUSTING LIGHT SWITCH .............................. 40 - 67

MOUNTINGS (FIXED SPEED WITH REVERSER) .... 110 -48 5C19 SHOE GRAIN SUPPLY AUGER CLEANOUT DOOR,

4F15 SHAFT, FRONT WITH REVERSER (VARIABLE) HANDLE AND LATCHES ............................................ 120 -36

9400, 9500 COMBINES .............................................. 110 -8 5C20 SHOE GRAIN SUPPLY AUGERS AND HOUSING ........ 120 -38

2H5 SHAFT, HYDROSTATIC DRIVE PUMP .......................... 50 - 26 5C22 SHOE GRAIN SUPPLY AUGERS AND HOUSING ........ 120 -40

2H21 SHAFT, OUTER COVER, BEARING AND SEALS 3B17 SHOES, BRAKE................................................................ 60 - 10

CAM LOBE MOTOR .................................................... 50 - 42 1C13 SHORT BLOCK

1D3 SHAFT, ROCKER ARM .................................................... 26 - 26 (WITH HEAD BOLTS) .................................................. 26 - 10

2G22 SHAFTS, DIFFERENTIAL ................................................ 50 - 18 1C11 SHORT BLOCK (WITHOUT HEAD BOLTS).................... 26 - 8

2H3 SHAFTS, FINAL DRIVE.................................................... 50 - 24 1E15 SHORT BLOCK GASKET KIT (6076) .............................. 26 - 68

5E3 SHAKER PAN 5C24 SHROUDS AND FANS, CLEANING ................................ 120 -42

( -655400) .............................................................. 120 -70 5D1 SHROUDS AND FANS, CLEANING ................................ 120 -44

5E5 SHAKER PAN 4C23 SHROUDS, SEAT ............................................................ 90 - 40

(655401-665400) .......................................................... 120 -72 1E5 SHUT-OFF HOUSING SOLENOID (ROBERT BOSCH)

5E7 SHAKER PAN (6076HH030, HH034) (LATE DESIGN) ...................... 26 - 58

(665401- ) .............................................................. 120 -74 4B14 SIDE AND REAR SEALS, CAB ...................................... 90 - 6

5H17 SHEAVE AND CHARGE PUMP MOUNTING, REEL/ 2D23 SIDE FINDER LIGHTS, L.H. AND R.H. .......................... 40 - 62

BELT PICKUP .............................................................. 121 -64 3I13 SIDE SHIELDS, SEPARATOR DRIVE ............................ 80 - 30

5C15 SHEAVE AND GEARCASE, BEATER ............................ 120 -32 5H3 SIEVE AND CHAFFER DRIVE, CONVEYOR AUGERS 121 -50

6F16 SHEAVE AND GEARCASE, CLEAN GRAIN 5D23 SIEVE ELEMENT .............................................................. 120 -66

ELEVATOR .................................................................. 130 -20 5E1 SIEVE FRAME .................................................................. 120 -68

5H13 SHEAVE LINKAGE, FAN DRIVE SPEED CONTROL .... 121 -60 5G12 SINGLE RANGE CYLINDER DRIVE................................ 121 -35

4F9 SHEAVE, MOUNTINGS, FRONT VARIABLE 3G1 SIX STACK SOLENOID CONTROL VALVE MODULE

DRIVE .......................................................................... 110 -2 ASSEMBLY & MOUNTINGS (660401- ) .............. 70 - 72

4H3 SHEAVE, MOUNTINGS, UPPER DRIVE SHAFT............ 110 -46 3B19 SLAVE CYLINDER, BRAKE ............................................ 60 - 12

6B20 SHEAVE, ROTOR AND STRAW CHOPPER .................. 125 -12 4G22 SLIP CLUTCH,FEEDER HOUSE .................................... 110 -40

6F7 SHEAVE, SHAFT AND SPROCKET, UPPER 5G11 SLOW SPEED CYLINDER DRIVE .................................. 121 -34

CLEAN GRAIN ELEVATOR ........................................ 130 -10 1F10 SOLDENOID, ETHER START

4G24 SHEAVES, FEEDER HOUSE, UPPER (655615- ) .............................................................. 30 - 10

COUNTERSHAFT, VARIABLE DRIVE ........................ 110 -42 3F11 SOLENOID CONTROL RELIEF VALVE MODULE.......... 70 - 54

3J7 SHEET AND DOOR, L.H. FRONT CORNER .................. 80 - 48 3F21 SOLENOID CONTROL VALVE - CONTOUR MASTER

3J3 SHEET, FRONT CORNER, R.H....................................... 80 - 44 (660401- ) ................................................................ 70 - 66

3J5 SHEET, REAR CORNER, L.H. ........................................ 80 - 46 3F25 SOLENOID CONTROL VALVE BRACKETS.................... 70 - 70

4G5 SHELL, FEEDER HOUSE-CONTOUR MASTER 3F16 SOLENOID CONTROL VALVE DOUBLE PILOTED

(660401- ) .............................................................. 110 -22 MODULE, AUGER SWING.......................................... 70 - 60

3H15 SHELL, SEALS, RADIATOR ............................................ 80 - 8 3F19 SOLENOID CONTROL VALVE FOR REEL FORE/AFT

3I21 SHIELD, DRIVE, R.H. REAR............................................ 80 - 38 (650401- ) .............................................................. 70 - 64

1D1 SHIELD, EXHAUST VALVE (6076).................................. 26 - 24 3F14 SOLENOID CONTROL VALVE FOR REEL LIFT/

4H15 SHIELD, INTAKE .............................................................. 110 -58 VARIABLE AND CYLINDER SPEED .......................... 70 - 58

3I23 SHIELD, R.H. SERVICE ACCESS .................................. 80 - 40 3F23 SOLENOID CONTROL VALVE MODULE ASSEMBLY

6E14 SHIELD, REAR TAILINGS LEFT SIDE ............................ 125 -82 AND MOUNTINGS ...................................................... 70 - 68

3J1 SHIELD, SERVICE ACCESS, L.H. .................................. 80 - 42 3G1 SOLENOID CONTROL VALVE MODULE, 6 STACK

6E12 SHIELD, TAILINGS UPPER REAR .................................. 125 -80 ASSEMBLY & MOUNTINGS (660401- ) .............. 70 - 72

3C14 SHIELD, TRASH, REAR AXLE ........................................ 60 - 31 3F12 SOLENOID CONTROL VALVE UNBALANCED LOAD

6E8 SHIELD, UPPER TAILINGS AUGER DRIVE .................. 125 -76 MODULE (HEADER LIFT MODULE) .......................... 70 - 56

6E10 SHIELD, UPPER TAILINGS AUGER DRIVE .................. 125 -78 3F17 SOLENOID CONTROL VALVE, AUGER SWING............ 70 - 61

6C22 SHIELDS AND HANDLES, CHAFF SPREADER 3H5 SOLENOID CONTROL VALVE, ENGINE GEARCASE,

(DUAL MOTOR) (650401- ).................................. 125 -40 PRESSURE REGULATOR .......................................... 70 - 100

3I17 SHIELDS, AUGER DRIVE (R-H SIDE) ............................ 80 - 34 1E21 SOLENOID SWITCH, STARTER (6076) .......................... 26 - 74

5D3 SHIELDS, CLEANING FAN INTAKE................................ 120 -46 2I10 SOLENOID, CONTROL VALVE ...................................... 50 - 56

4F23 SHIELDS, CONTOURMASTER FEEDER HOUSE 6H13 SOLENOID, MAIN VALVE BLOCK

(660401-660432) .......................................................... 110 -16 DIAL-A-MATIC HEADER HEIGHT CONTROL ............ 160 -3

4G1 SHIELDS, CONTOURMASTER FEEDER HOUSE 1E5 SOLENOID, SHUT-OFF HOUSING (RB)

(661186- ) .............................................................. 110 -18 (6076HH030, HH034) (LATE DESIGN) ...................... 26 - 58

2H7 SHIELDS, FINAL DRIVE SHAFT .................................... 50 - 28 1E19 SOLENOID, STARTER (12V F4) .................................... 26 - 72

6C20 SHIELDS, HANDLES AND FRAME, CHAFF 3E15 SOLENOID, VALVE BLOCK, DIAL-A-MATIC,

SPREADER (BELT TYPE) ( -650400).................. 125 -38 HEADER HEIGHT CONTROL .................................... 70 - 34

2I11 SHIELDS, MUD ................................................................ 50 - 57 4B12 SOUND DEADENING, FOAM AND SEALS, CAB .......... 90 - 4

3J9 SHIELDS, MUD (R.H. SIDE) ............................................ 80 - 50 2G9 SPACERS, AXLE .............................................................. 50 - 5

3I19 SHIELDS, MUD AND FAN DRIVE (L.H. SIDE) .............. 80 - 36 2C17 SPEAKERS, ANTENNA AND RADIO .............................. 40 - 32

5E10 SHIELDS, REAR MODULE .............................................. 120 -78 5H9 SPEED CONTROL LINKAGE, FAN DRIVE

3I13 SHIELDS, SIDE, SEPARATOR DRIVE............................ 80 - 30 ( -655400) .............................................................. 121 -56

6F20 SHIELDS, UPPER CLEAN GRAIN ELEVATOR .............. 130 -24 5H11 SPEED CONTROL LINKAGE, FAN DRIVE

2G24 SHIFTER CAM, TRANSMISSION AND (655401- ) .............................................................. 121 -58

DIFFERENTIAL ............................................................ 50 - 20 5H13 SPEED CONTROL, FAN DRIVE SHEAVE LINKAGE .... 121 -60

2G10 SHIFTER FORKS .............................................................. 50 - 6 5C1 SPIKE TOOTH CONCAVE .............................................. 120 -18

1C18 SHIM, LINER (6076) ........................................................ 26 - 15 5B22 SPIKE TOOTH THRESHING CYLINDER ........................ 120 -14

CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00) 10-27

PN=27

1B4

CTS COMBINE (NORTH AMERICAN VERSION)

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

5B24 SPIKE-TOOTH CONCAVE .............................................. 120 -16 6C6 STRAW SPREADER ........................................................ 125 -24

3C18 SPINDLE HOUSING, REAR AXLE .................................. 60 - 35 6C14 STRAW SPREADER DOOR ............................................ 125 -32

3C23 SPINDLES, REAR AXLE .................................................. 60 - 40 6C8 STRAW SPREADER DRIVES .......................................... 125 -26

6C10 SPREADER CURTAIN, UPPER ...................................... 125 -28 6C12 STRAW SPREADER FRAME AND LOWER CURTAIN.. 125 -30

6C12 SPREADER FRAME, STRAW AND LOWER CURTAIN 125 -30 5C7 STRIPPER BEATER ........................................................ 120 -24

3D14 SPREADER MOTOR, CHAFF 5C5 STRIPPER BEATER DRIVE IDLER ................................ 120 -22

(EATON) (655929- ) .............................................. 70 - 9 2F1 STUBBLE HEIGHT SENSOR (EXPORT ONLY) ............ 40 - 89

6C6 SPREADER, STRAW........................................................ 125 -24 2F22 SUPPLEMENTARY TERMINALS AND CONNECTORS 40 - 110

6H20 SPREADER, STRAW, BELTS .......................................... 170 -4 4B22 SUPPORT AND FRAME, CAB ........................................ 90 - 14

6F7 SPROCKET, SHEAVE AND SHAFT, UPPER 3B20 SUPPORT BRACKET, BRAKE CABLE

CLEAN GRAIN ELEVATOR ........................................ 130 -10 (645510- ) .............................................................. 60 - 13

6D25 SPROCKETS, BEARINGS AND CHAIN, TAILINGS 6D3 SUPPORT, MOUNTING, CHAFF SPREADER ................ 125 -46

ELEVATOR CONVEYOR ............................................ 125 -68 3C15 SUPPORT, REAR AXLE .................................................. 60 - 32

1C22 STARTER GEAR (6076) .................................................. 26 - 19 3I7 SUPPORTS AND MOUNTING TRACKS, MODULE ...... 80 - 24

1E19 STARTER SOLENOID (12V F4) ...................................... 26 - 72 4B24 SUPPORTS AND ROOF, CAB ........................................ 90 - 16

1E18 STARTER SOLENOID COVER (DENSO) ...................... 26 - 71 5G9 SUPPORTS AND VARIABLE SHEAVE, PRIMARY

1E21 STARTER SOLENOID SWITCH (6076) .......................... 26 - 74 COUNTERSHAFT ........................................................ 121 -32

1F8 STARTING AID, COLD WEATHER 1F2 SUPPORTS, FUEL TANK ................................................ 30 - 2

( -655614) ................................................................ 30 - 8 4G24 SUPPORTS, UPPER COUNTERSHAFT, FEEDER

1F10 STARTING AID, COLD WEATHER HOUSE, VARIABLE DRIVE ........................................ 110 -42

(655615- ) .............................................................. 30 - 10 2H9 SWASHPLATE, HYDROSTATIC DRIVE PUMP .............. 50 - 30

1D25 STARTING FITTINGS, ETHER (6076) ............................ 26 - 53 1E19 SWITCH (DENSO) (12V F4) ............................................ 26 - 72

1E18 STARTING MOTOR (DENSO) 6G13 SWITCH AND HUB SUPPORT, HORIZONTAL

(12V F4) ........................................................................ 26 - 71 UNLOADING AUGER .................................................. 130 -42

2I6 STEERING ARM .............................................................. 50 - 52 2C9 SWITCH, AIR CONDITIONER.......................................... 40 - 24

3C3 STEERING COLUMN (LOWER) ...................................... 60 - 20 2B14 SWITCH, AUX FIELD LIGHTS, OPTIONAL .................... 40 - 4

3C1 STEERING COLUMN (UPPER) ...................................... 60 - 18 2C9 SWITCH, HEATER............................................................ 40 - 24

4E2 STEERING COLUMN (UPPER) ...................................... 90 - 70 6G14 SWITCH, HORIZONTAL UNLOADING AUGER .............. 130 -43

2C1 STEERING COLUMN WIRING HARNESS 2G12 SWITCH, HYDROSTATIC DRIVE LEVER AND CABL

(646237-) ...................................................................... 40 - 16 E .................................................................................... 50 - 8

4E4 STEERING COLUMN, LOWER ........................................ 90 - 72 2D12 SWITCH, INLET AIR TEMPERTURE .............................. 40 - 51

3C13 STEERING CYLINDER (4-WHEEL DRIVE) .................... 60 - 30 2E4 SWITCH, LIGHT, SHOE ADJUSTING ............................ 40 - 67

3C5 STEERING HOSES AND LINES, FRONT ...................... 60 - 22 2D5 SWITCH, LIMIT, GRAIN TANK ........................................ 40 - 44

3B23 STEERING HOSES, UPPER ............................................ 60 - 16 1E21 SWITCH, STARTER SOLENOID (6076) .......................... 26 - 74

3C11 STEERING LINES AND HOSES, REAR ........................ 60 - 28 2D17 SWITCH, WARNING ENGINE PLUGGED AIR

3C7 STEERING LINES, L.H..................................................... 60 - 24 FILTER .......................................................................... 40 - 56

3C9 STEERING LINES, R.H. SIDE ........................................ 60 - 26 6G11 SWIVEL SUPPORT AND BRACES, AUGER .................. 130 -40

3B21 STEERING PUMP ............................................................ 60 - 14 6G9 SWIVEL, HORIZONTAL UNLOADING AUGER .............. 130 -38

3C19 STEERING TIE RODS, ADJUSTABLE REAR AXLE ...... 60 - 36

3C21 STEERING TIE RODS, FIXED REAR AXLE

GRAIN (655542- ).................................................. 60 - 38 T

3C20 STEERING TIE RODS, FIXED REAR AXLE,

4-WHEEL DRIVE - GRAIN (655542- ) ................ 60 - 37 2B16 TACHOMETER .................................................................. 40 - 6

3H23 STEP AND PLATFORM, ENGINE ACCESS .................. 80 - 16 4C17 TACHOMETER.................................................................. 90 - 34

5B10 STONE TRAP, DOOR AND SEAL, SEPARATOR/ 2B19 TAIL LIGHTS .................................................................... 40 - 9

FEEDER HOUSE.......................................................... 120 -2 6E1 TAILINGS DRIVE BRACKET AND LOWER TROUGH

3I9 STOP AND REAR HOOD ACCESS DOOR .................... 80 - 26 SUPPORT .................................................................... 125 -69

1E23 STRAP, ALTERNATOR ADJUSTING .............................. 26 - 76 6D25 TAILINGS ELEVATOR CONVEYOR CHAIN,

1E23 STRAP, ALTERNATOR SUPPORT.................................. 26 - 76 SPROCKETS AND BEARINGS .................................. 125 -68

1D5 STRAPS, ENGINE LIFT.................................................... 26 - 28 6D23 TAILINGS ELEVATOR HOUSING.................................... 125 -66

6H20 STRAW CHOPPER BELTS .............................................. 170 -4 6E14 TAILINGS SHIELD, REAR LEFT SIDE ............................ 125 -82

6B10 STRAW CHOPPER DECK, SUPPORTS AND FINS ...... 125 -2 6E12 TAILINGS SHIELD, UPPER REAR .................................. 125 -80

5H19 STRAW CHOPPER DRIVES ............................................ 121 -66 3I11 TAILLIGHT WIRING HARNESS ...................................... 80 - 28

6B22 STRAW CHOPPER HOUSING AND KNIFEBANK .......... 125 -14 6F24 TANK BASE, GRAIN ........................................................ 130 -28

6B24 STRAW CHOPPER HOUSING AND KNIFEBANK .......... 125 -16 6H1 TANK CROSS AUGERS, GRAIN .................................... 130 -54

6C3 STRAW CHOPPER LOWER DOOR ................................ 125 -20 1F6 TANK FUEL LINES AND FITTINGS ................................ 30 - 6

6B18 STRAW CHOPPER ROTOR, FINE CUT (PADDLED 1F18 TANK, COOLANT RECOVERY ........................................ 30 - 18

NARROW (670401- ) ............................................ 125 -10 1F2 TANK, FUEL...................................................................... 30 - 2

6B16 STRAW CHOPPER ROTOR, FINE CUT (STRAIGHT 6H7 TANK, GRAIN, SAMPLING TROUGH.............................. 130 -62

NARROW (670401- ) ............................................ 125 -8 6F22 TANK, GRAIN, TOP.......................................................... 130 -26

6C1 STRAW CHOPPER UPPER REAR DOOR .................... 125 -18 2B16 TEMPERATURE GAUGE, ENGINE ................................ 40 - 6

6B20 STRAW CHOPPER, ROTOR AND SHEAVE .................. 125 -12 4C17 TEMPERATURE GAUGE, ENGINE ................................ 90 - 34

6B12 STRAW CHOPPER, TRI ROTOR 1E5 TEMPERATURE SENSOR (6076HH030, HH034)

( -655400) .............................................................. 125 -4 (ROBERT BOSCH)(LATE DESIGN) ............................ 26 - 58

6B14 STRAW CHOPPER, TRI ROTOR (655401- ).............. 125 -6 2F20 TERMINAL AND WIRING KIT .......................................... 40 - 108

5F15 STRAW CHOPPER, UNLOADING DRIVE AND 2F22 TERMINALS AND CONNECTORS, SUPPLEMENTARY 40 - 110

SEPARATOR DRIVE GEAR, ENGINE GEARCASE .. 121 -14

10-28 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00)

PN=28

1B5

CTS COMBINE (NORTH AMERICAN VERSION)

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

1E13 TERMINALS, ELECTRICAL, WEATHERPACK 1D20 TURBOCHARGER GASKET ............................................ 26 - 48

(6076) ............................................................................ 26 - 66 1D20 TURBOCHARGER OIL LINES

2F14 TERMINALS, WEATHERPACK ........................................ 40 - 102 (ESN 500000- )...................................................... 26 - 48

1D15 THERMOSTAT HOUSING, FRONT ................................ 26 - 42 2B19 TURN LIGHTS .................................................................. 40 - 9

5B9 THRESHING CYLINDER COVER .................................... 120 -1

5B18 THRESHING CYLINDER, RASP BAR ............................ 120 -10

5B22 THRESHING CYLINDER, SPIKE TOOTH ...................... 120 -14 U

1C20 THRUST BEARING (6076) .............................................. 26 - 17

3C19 TIE RODS, STEERING, ADJUSTABLE REAR AXLE .... 60 - 36 1C17 UNDERHAUL KIT, ENGINE (STD BRGS)

3C21 TIE RODS, STEERING, FIXED REAR AXLE (6076) ............................................................................ 26 - 14

GRAIN (655542- ).................................................. 60 - 38 5F13 UNLOADING AND SEPARATOR DRIVE GEAR,

3C20 TIE RODS, STEERING, 4-WHEEL DRIVE FIXED ENGINE GEARCASE .................................................. 121 -12

REAR AXLE - GRAIN (655542- ) ........................ 60 - 37 6H20 UNLOADING AUGER BELTS .......................................... 170 -4

6D19 TIGHTENER AND SHAFT, LOWER TAILINGS 6H4 UNLOADING AUGER COUNTERSHAFT DRIVE............ 130 -58

AUGER.......................................................................... 125 -62 6H6 UNLOADING AUGER DRIVE BELT GUIDE.................... 130 -60

5G17 TIGHTENER, CYLINDER DRIVE, DUAL-RANGE .......... 121 -40 6G20 UNLOADING AUGER HOUSING, HORIZONTAL

6E3 TIGHTENER, DRIVE CHAIN, UPPER TAILINGS............ 125 -71 (EXPORT) (17 AND 20 FT.)........................................ 130 -49A

4F17 TIGHTENER, DRIVE, VARIABLE SPEED ...................... 110 -10 6G16 UNLOADING AUGER HOUSING, HORIZONTAL

5H15 TIGHTENER, FEEDER HOUSE DRIVE .......................... 121 -62 (14- AND 17-FT.) .......................................................... 130 -46

4G18 TIGHTENER, GUIDES AND FEEDER CONVEYOR 6G18 UNLOADING AUGER HOUSING, HORIZONTAL

DRIVE CHAIN .............................................................. 110 -36 (17- AND 20-FT.) .......................................................... 130 -48

4H9 TIGHTENER, GUIDES AND FEEDER CONVEYOR 2D21 UNLOADING AUGER LIGHT, GRAIN TANK .................. 40 - 60

DRIVE CHAIN-RETROFIT INSTALLATION ................ 110 -52 6H9 UNLOADING AUGER LUBE BANK ................................ 130 -64

4G7 TILT BEAM, FEEDER HOUSE, CONTOUR MASTER 2D7 UNLOADING AUGER SENSOR AND WIRING

(660401- ) .............................................................. 110 -24 HARNESS (660401- )............................................ 40 - 46

3G17 TILT CYLINDER - CONTOUR MASTER 3G11 UNLOADING AUGER SWING CYLINDER AND

(660401- ) .............................................................. 70 - 88 MOUNTING .................................................................. 70 - 82

3G19 TILT CYLINDER HOSES AND FITTINGS - 3G13 UNLOADING AUGER SWING CYLINDER AND

CONTOUR MASTER (660401- ) .......................... 70 - 90 MOUNTING (650401-655551) ...................................... 70 - 84

1C23 TIMING GEAR COVER (6076) ........................................ 26 - 20 3G15 UNLOADING AUGER SWING HYDRAULIC CYLINDER

1C23 TIMING GEAR COVER GASKET (6076) ........................ 26 - 20 (655552- ) .............................................................. 70 - 86

3H9 TINE SEPARATOR MODULE RAILS .............................. 80 - 2 3G7 UNLOADING AUGER SWING HYDRAULIC CYLINDER

5E20 TINE SEPARATORS, MODULE ...................................... 120 -88 LINES AND HOSES .................................................... 70 - 78

4C7 TOOL BOX 3G15 UNLOADING AUGER SWING HYDRAULIC MOUNTING

(660401- ) .............................................................. 90 - 24 (655552- ) .............................................................. 70 - 86

6J16 TOP DECALS.................................................................... 170 -50 3G9 UNLOADING DRIVE CYLINDER, GRAIN TANK ............ 70 - 80

1C5 TORQ-GARD ENGINE OIL .............................................. 26 - 1 5F15 UNLOADING DRIVE, STRAW CHOPPER AND

4C23 TRAINING SEAT .............................................................. 90 - 40 SEPARATOR DRIVE GEAR, ENGINE GEARCASE .. 121 -14

1E8 TRANSFER PUMP, FUEL (ROBERT BOSCH) 6H21 UNLOADING SYSTEM BELTS ........................................ 170 -5

(6076HH030, HH034) .................................................. 26 - 61 6F5 UPPER CLEAN GRAIN ELEVATOR................................ 130 -8

6F9 TRANSITION AUGER HOUSING .................................... 130 -12 6F7 UPPER CLEAN GRAIN ELEVATOR SHAFT,

2G11 TRANSMISSION SPROCKET AND SHEAVE.......................................... 130 -10

(655429- ) .............................................................. 50 - 7 6F20 UPPER CLEAN GRAIN ELEVATOR SHIELDS .............. 130 -24

2G24 TRANSMISSION AND DIFFERENTIAL 6F9 UPPER CLEAN GRAIN LOADING AUGER HOUSING .. 130 -12

HOUSING COVER AND SHIFTER CAM .................... 50 - 20 6F11 UPPER CLEAN GRAIN LOADING AUGER HOUSING

2G10 TRANSMISSION AND DIFFERENTIAL HOUSING (660401- ) .............................................................. 130 -14

AND SHIFTER FORKS................................................ 50 - 6 4H3 UPPER DRIVE SHAFT FIXED SPEED WITH

2G18 TRANSMISSION INPUT SHAFT, GEARS, LUBE REVERSER .................................................................. 110 -46

PUMP AND BEARINGS .............................................. 50 - 14 2E13 UPPER HARNESS CONNECTORS FOR 6076 ENGINE 40 - 76

2G20 TRANSMISSION PINION SHAFT, GEARS AND 2D13 UPPER HARNESS FOR 6076 ENGINE .......................... 40 - 52

BEARINGS .................................................................... 50 - 16 2I24 UPPER HYDROSTATIC DRIVE HOSES

2F8 TRANSPORT WARNING LIGHTS.................................... 40 - 96 (FOUR WHEEL DRIVE)(655401- ) ...................... 50 - 70

3C14 TRASH SHIELD, REAR AXLE ........................................ 60 - 31 6C1 UPPER REAR DOOR, STRAW CHOPPER .................... 125 -18

6B12 TRI ROTOR STRAW CHOPPER 6E12 UPPER REAR TAILINGS SHIELD .................................. 125 -80

( -655400) .............................................................. 125 -4 3E13 UPPER RETURN LINES AND HOSES, HYDRAULIC

6B14 TRI ROTOR STRAW CHOPPER (655401- ) ............ 125 -6 RESERVOIR ................................................................ 70 - 32

4B16 TRIM PANELS, CAB INTERIOR ...................................... 90 - 8 4G12 UPPER SHAFT, FEEDER HOUSE .................................. 110 -30

6E1 TROUGH SUPPORT,LOWER AND TAILINGS DRIVE 6C10 UPPER SPREADER CURTAIN ........................................ 125 -28

BRACKET...................................................................... 125 -69 3C1 UPPER STEERING COLUMN.......................................... 60 - 18

6H7 TROUGH, GRAIN TANKSAMPLING ................................ 130 -62 4E2 UPPER STEERING COLUMN .......................................... 90 - 70

6D21 TROUGH, LOWER TAILINGS AUGER............................ 125 -64 6H21 UPPER TAILINGS AUGER BELT .................................... 170 -5

1C25 TUBE, ENGINE OIL DIPSTICK (6076) ............................ 26 - 22 6E8 UPPER TAILINGS AUGER DRIVE .................................. 125 -76

1F12 TUBES, AIR CLEANER AND INTAKE ............................ 30 - 12 6E10 UPPER TAILINGS AUGER DRIVE .................................. 125 -78

1D20 TURBOCHARGER 6E6 UPPER TAILINGS AUGER HOUSING AND PADDLE

(ESN 500000- )...................................................... 26 - 48 ASSEMBLY .................................................................. 125 -74

1D22 TURBOCHARGER CENTER HOUSING (AIRESEARCH) 26 - 50 6E8 UPPER TAILINGS AUGER, DRIVE AND SHIELD .......... 125 -76

1D23 TURBOCHARGER CENTER HOUSING (SCHWITZER) 26 - 51 6E10 UPPER TAILINGS AUGER, DRIVE AND SHIELD .......... 125 -78

CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00) 10-29

PN=29

1B6

CTS COMBINE (NORTH AMERICAN VERSION)

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

6E3 UPPER TAILINGS DRIVE CHAIN TIGHTENER.............. 125 -71 1D12 WATER PUMP GASKET .................................................. 26 - 38

2I22 UPPER, HYDROSTATIC DRIVE OIL HOSES 1D12 WATER PUMP IMPELLER .............................................. 26 - 38

( -655400) .............................................................. 50 - 68 1D14 WATER PUMP REPAIR KIT (6076) ................................ 26 - 40

1D12 WATER PUMP SEAL........................................................ 26 - 38

1F4 WATER SEPARATOR ...................................................... 30 - 4

V 4G5 WEAR PLATES, FEEDER HOUSE - CONTOUR

MASTER (660401- ) .............................................. 110 -22

6H12 VALVE BLOCK AND HYDRAULIC LINE, 1E13 WEATHERPACK CONNECTORS (6076) ........................ 26 - 66

DIAL-A-MATIC HEADER HEIGHT CONTROL ............ 160 -2 2F14 WEATHERPACK CONNECTORS AND TERMINALS .... 40 - 102

3E15 VALVE BLOCK SOLENOID, DIAL-A-MATIC, 1E13 WEATHERPACK TERMINALS (6076) ............................ 26 - 66

HEADER HEIGHT CONTROL .................................... 70 - 34 2F14 WEATHERPACK TERMINALS AND CONNECTORS .... 40 - 102

3G1 VALVE MODULE, SIX STACK SOLENOID CONTROL 1D12 WEEP HOLE FILTER (WATER PUMP) .......................... 26 - 38

ASSEMBLY & MOUNTINGS (660401- ) .............. 70 - 72 3D1 WEIGHTS, WHEELS, REAR ............................................ 60 - 42

1D1 VALVE SEAT INSERTS (6076)........................................ 26 - 24 3G21 WET CLUTCH OIL COOLER LINES AND HOSES

3F16 VALVE, AUGER SWING, DOUBLE PILOTED, ( -665400) .............................................................. 70 - 92

SOLENOID CONTROL VALVE .................................... 70 - 60 3G23 WET CLUTCH OIL COOLER LINES AND HOSES

2I8 VALVE, CONTROL ( -655400) .................................. 50 - 54 (665401- ) .............................................................. 70 - 94

2I9 VALVE, CONTROL (655401- ) .................................. 50 - 55 2G6 WHEEL, HIGH FLOATATION DRIVE

2I10 VALVE, CONTROL, SOLENOID ...................................... 50 - 56 PLANETARY FINAL DRIVE ........................................ 50 - 2

1E11 VALVE, FUEL CHECK (6076HH030, HH034) ................ 26 - 64 2G5 WHEELS, DRIVE .............................................................. 50 - 1

2H14 VALVE, HYDROSTATIC MOTOR .................................... 50 - 35 2G7 WHEELS, DUAL, WIDE-SPACED .................................... 50 - 3

1D9 VALVE, OIL FILTER BYPASS.......................................... 26 - 34 3C22 WHEELS, REAR .............................................................. 60 - 39

1D11 VALVE, OIL PAN DRAIN.................................................. 26 - 36 3D1 WHEELS, REAR AND WHEEL WEIGHTS ...................... 60 - 42

1D9 VALVE, OIL PRESSURE REGULATING ........................ 26 - 34 2G7 WIDE-SPACED DUAL WHEELS ...................................... 50 - 3

6D11 VALVE, PUMP, LINES AND HOSES, CHAFF 3I15 WINDROW ATTACHMENT (660714- ) .................... 80 - 32

SPREADER .................................................................. 125 -54 2C15 WINDSHIELD WASHER .................................................. 40 - 30

3D11 VALVE, REEL DRIVE FLOW CONTROL ........................ 70 - 6 2C11 WINDSHIELD WIPER (LONG) ........................................ 40 - 26

3F21 VALVE, SOLENOID CONTROL - CONTOUR MASTER 2C13 WINDSHIELD WIPER, (SHORT) ...................................... 40 - 28

(660401- ) .............................................................. 70 - 66 6D1 WINGS, SEALS AND PAN, CHAFF SPREADER

3F23 VALVE, SOLENOID CONTROL MODULE ASSEMBLY (DUAL MOTOR) (650401- ) .................................. 125 -44

AND MOUNTINGS ...................................................... 70 - 68 2C11 WIPER, WINDSHIELD (LONG) ........................................ 40 - 26

3F11 VALVE, SOLENOID CONTROL RELIEF - CONTOUR 2C13 WIPER, WINDSHIELD (SHORT)...................................... 40 - 28

MASTER ...................................................................... 70 - 54 2F20 WIRING AND TERMINAL KIT .......................................... 40 - 108

3F12 VALVE, SOLENOID CONTROL, HEADER LIFT 1E3 WIRING HARNESS (6076HH030)

MODULE ...................................................................... 70 - 56 (EARLY DESIGN) ........................................................ 26 - 56

3F14 VALVE, SOLENOID CONTROL, REEL LIFT/ 1E5 WIRING HARNESS (6076HH030, HH034)

VARIABLE AND CYLINDER SPEED .......................... 70 - 58 (ROBERT BOSCH)(LATE DESIGN) ............................ 26 - 58

4E17 VALVES, COMPRESSOR SERVICE 2C5 WIRING HARNESS, A/C, HEATER AND AIR SEAT

( -650400) R-12 .................................................... 90 - 85 (660401- ) .............................................................. 40 - 20

1D1 VALVES, EXHAUST (6076).............................................. 26 - 24 2C3 WIRING HARNESS, AIR CONDITIONER

1D1 VALVES, INTAKE (6076).................................................. 26 - 24 ( -660400) .............................................................. 40 - 18

3D15 VARIABLE DRIVE HYDRAULIC HOSE, FEEDER 2B22 WIRING HARNESS, ARMREST ...................................... 40 - 12

HOUSE.......................................................................... 70 - 10 2B12 WIRING HARNESS, CAB ................................................ 40 - 2

4G24 VARIABLE DRIVE, FEEDER HOUSE, UPPER 2C21 WIRING HARNESS, FRONT, L.H. MAIN ........................ 40 - 36

COUNTERSHAFT ........................................................ 110 -42 2D5 WIRING HARNESS, GRAIN TANK .................................. 40 - 44

4F15 VARIABLE FRONT SHAFT WITH REVERSER 2D9 WIRING HARNESS, HARVESTRAK MONITOR.............. 40 - 48

9400, 9500 COMBINES .............................................. 110 -8 2C3 WIRING HARNESS, HEATER

5G9 VARIABLE SHEAVE AND SUPPORTS, PRIMARY ( -660400) .............................................................. 40 - 18

COUNTERSHAFT ........................................................ 121 -32 2D1 WIRING HARNESS, L.H. AND R.H. REAR .................... 40 - 40

4F17 VARIABLE SPEED DRIVE TIGHTENER ........................ 110 -10 2C23 WIRING HARNESS, L.H. MAIN, CENTER ...................... 40 - 38

4G24 VARIBLE DRIVE, FEEDER HOUSE, UPPER 2C19 WIRING HARNESS, MAIN, L.H. FRONT ........................ 40 - 34

COUNTERSHAFT SUPPORTS.................................... 110 -42 2D1 WIRING HARNESS, MODULE ........................................ 40 - 40

6G5 VERTICAL AUGER LOWER GEAR CASE ...................... 130 -34 2D3 WIRING HARNESS, R.H. MAIN ...................................... 40 - 42

6G7 VERTICAL UNLOADING AUGER AND CHARGE 2D1 WIRING HARNESS, REAR HOOD .................................. 40 - 40

HOUSING...................................................................... 130 -36 2C1 WIRING HARNESS, STEERING COLUMN

2E1 VOLTAGE REGULATOR, ALTERNATOR - BOSCH ...... 40 - 64 (646237-) ...................................................................... 40 - 16

3I11 WIRING HARNESS, TAILLIGHT ...................................... 80 - 28

2D7 WIRING HARNESS, UNLOADING AUGER

W (660401- ) .............................................................. 40

- 46

6H18 WALKER BELTS .............................................................. 170 -2

2F8 WARNING LIGHTS, TRANSPORT .................................. 40 - 96 Y

2C15 WASHER, WINDSHIELD .................................................. 40 - 30

1D15 WATER MANIFOLD GASKET .......................................... 26 - 42 2I4 YOKE, PIVOTS AND CAPS ............................................ 50 - 50

1D15 WATER MANIFOLD, FRONT .......................................... 26 - 42

1D12 WATER PUMP .................................................................. 26 - 38

1D12 WATER PUMP BEARING ................................................ 26 - 38

10-30 CTS COMBINE (NORTH AMERICAN VERSION) PC2341 (31-MAY-00)

PN=30

+ 1086 hidden pages