John Deere CX20, HX20, HX15, CX15 User Manual

4 (2)
HX15, CX15, HX20, CX20 H
Return to Index
F
LEX
-W
ING ROTARY
C
UTTERS
EAVY
-D
WARNING!
SAFETY CHAIN SHIELDING IS AVAILABLE FOR ALL CUTTERS.
Because of the possibility of injury or damage from thrown objects, improperly used rotary cutters are potentially dangerous. Optional Front and Safety Shielding is strongly recommended for defl ecting objects when cutters are used in a populated area or when additional safety precautions are needed. (Refer to Operator’s Manual for owner’s responsibility and detailed safety procedures.)
FEATURES
The HX15, CX15, HX20 and CX20 are 15-ft. and 20-ft., 3-section fl ex-wing rotary cutters suited for applications ranging from pasture maintenance and/or crop shredding to intensive, high-hour, commercial roadside mowing.
THE HEAVY-DUTY HX15 AND HX20 ARE MEANT FOR:
• Farmers and ranchers with large-acreage pasture maintenance.
• Private, commercial or governmental grass maintenance averaging approximately 300 hours of annual usage for 10 years (i.e., 3,000-hour machine life expectancy).
• The HX20 is also available as 13.5-ft. fl ex-wing rotary cutter with a 6-in. blade overlap by ordering as a 2-section fl ex wing with weight box on the left side.
THE COMMERCIAL-DUTY CX15 AND CX20 ARE MEANT FOR:
• Farmers and ranchers with very large-acreage pasture maintenance and/or typically very hard and very rough ground.
• Private, commercial or governmental grass maintenance averaging approximately 500 hours of annual usage for 10 years (i.e., 5,000 hour machine life expectancy).
• The CX15 is also available as 10-ft., 2-section fl ex-wing rotary cutter with a 6-in. blade overlap and the CX20 as 13.5-ft., 2-section fl ex wing by ordering with a weigth box in place of the left wing.
• Tractor with a minimum of 55 horsepower (41 kW) is required to operate HX15 and CX15 Rotary Cutters. Drawbar must have minimum of 1,960 lb. static load rating for HX15 and 2,115 lb. (960 kg) static load rating for CX15.Tractor with a minimum of 75 horsepower (56 kW) is required to operate HX20 and CX20 Rotary Cutters. Drawbar must have minimum of 2,640 lb. (12 KN) static load rating.
COMPATIBILITY CHART
Rotary Cutter Tractor
HX15 & CX15 5325 and larger
HX20 & CX20 6403 and larger
C&CE PURCHASING GUIDE 2008
130
Loading...
+ 2 hidden pages