John Deere 200D, 200D LC Specifications

Download

200D | 2 00D LC

20 METRIC TON

EXCAVATORS

Arm yourself to

ge t mor e d one.

ge t mor e done.

When you’re ready to take aim at your bottom line, arm yourself with the standard-undercarriage 200D or long-undercarriage 200D LC. Stronger and faster than before, thi s 20-metric- ton ex cav ator is load ed with enhancements that not only in c re ase prod u ctivity and uptime, but lower daily operating costs, too. A high -efﬁ ciency “o n-demand” coolin g system,

Tier 3 Powe rTec h™ E diesel eng in e , adv ance d mu ltifunction monitor, and m ore sp a c io us cab with 47percent more tinted glass headline the long list of advances. Delivering the power, smoothn e ss , and control you expect from a John Deere, the 200D and 200D LC come with everything you need to get more done .

PAGES

2–3

The 200D and 200D LC deliver more swing torque, drawbar pull, and lift capability, with less emissions and noise.

Extended engine and hydraulic ﬂ uid service intervals increase uptime and reduce daily operating costs.

Redesigned cab combines more legroom and tinted glass for unsurpassed comfort and visibility.

™

Powerwise III maximizes power output, saves fuel, and delivers smooth multifunction hydraulic operation.

Hydraulically driven fan runs only as needed, reducing noise, fuel consumption, and operating costs. Reversing option automatically back-blows cooler cores to reduce debris buildup.

Fuel-efﬁ cient Tier 3 emission-certiﬁ ed PowerTech E diesel delivers power without compromise in all conditions.

engine/hydraulic management system

Speciﬁ cations 200D 200D LC

Net Power . . . . . . . . . . . 159 hp 159 hp

Operating Weight . . . . . 48,617 lb. 49,940 lb.

Lift Capacity

Digging Depth . . . . . . . . 21 ft. 11 in. 21 ft. 11 in.

Arm Breakout Force . . . 22,924 lb. 22,924 lb.

. . . . . . . . . . 13,223 lb. 14,248 lb.

Noise levels — and operator fatigue — have been signiﬁ cantly reduced. Variable-speed fan, dualpass mufﬂ er, and isochronous high-idle speed help quiet things down.

Additional hydraulic capability a necessity? Two factory-installed high-pressure, high-ﬂ ow auxiliary hydraulic packages enable you to meet the need.

Who says you can’t always get what you want? Choose from a variety of track widths, arm lengths, buckets, and other options.

Changing hydraulic ﬂ ow is pushbutton easy through the monitor. Accommodates a wide variety of attachment needs, right from the seat.

1. Powerwize III perfectly balances engine performance and hydraulic ﬂ ow for smooth multifunction operation and fast

cycles. One work mode makes it easy to be productive in any application.

2. Generous hydraulic ﬂ ow combined with increased swing torque help you load more trucks or open more trench.

3. For ﬁ nesse work like setting pipe, the 200D and 200D LC’s best-in-class metering and smooth multifunction operation give you the precise, predictable control you need.

4. When the digging gets tough, simply press the power-boost button for

additional hydraulic muscle.

Hungry for

productivity?

The 200D and 200 D LC will satisfy your appetite. Faster hydraulics combined with increased lift capacity, swing to rque , and drawb ar pul l enab le you to p ile more work on your plate. You’ll enjoy typical John Deere ﬁ nesse, thanks to the Powerwise III engine /

hydraulic management system that delivers pinpoint metering and predictable smooth-as-silk low-effort control. And with numerou s noise-reduc ing featu res, the 200D and 200D LC quietly go about the bus in ess of making you m ore produ ctive . Di g in!

PAGES

4–5

More room.

More comfort.

More done .

Want your operators to be more productive? Put them in their place — behind the controls of a 200D or 200D LC. Their spacious well-appointed interior boasts more of everything. A wider expanse of tinted glass for virtually unrestricted visibility. More peace and quiet. Substantially

more legroom. And numerous creature comforts and conveniences including automatic climate control, AM/ FM radio, ample storage, and available heated air-suspension seat. The 200D and 200D LC deliver more of ever ything your operators need to do their best.

PAGES

6–7

Deluxe-suspension multi-position seat has 10½ inches of travel, sliding together or independent of the control console. So it won’t cramp an operator’s style.

Ergonomically designed short-throw pilot levers provide smooth, predictable ﬁ ngertip control with less movement and effort.

Go from backhoe- to SAE-style controls with just a twist of your wrist. Optional lockable control pattern selector valve comes factory-installed.

Pushbuttons in the right lever all ow ﬁ ngertip control of auxiliary hydraulic ﬂ ow for operating attachments.

Convenient 12-volt port powers cell phones a n d o t h er electronic devices.

Redesigned cab isn’t just roomier, it’s also noticeably quieter and more comfortable. Silicone-ﬁ lled cab mounts effectively isolate operators from noise and vibration.

1. Forty-seven-percent more glass, narrow front cab posts, large tinted overhead hatch, and numerous mirrors provide virtually unobstructed all-around visibility.

2. No shortage of storage in here. There’s a place for a cooler, cup holders, and even a hot/cold box that keeps refreshments at just the right temperature.

3. Automatic, high-velocity bi-level climatecontrol system with automotive-style adjustable louvers helps keep the glass clear and the cab comfortable.

4. Intuitive, multi-language monitor with four-color LCD screen provides a wealth of info and control. Displays operating, diagnostic, and maintenance data with easy-on-the-eyes clarity.

Optional reversing fan automatically back-blows cooler cores to reduce debris buildup. It’s a welcome addition that will increase uptime.

Graphite-iron wet-sleeve cylinder liners, mono-steel pistons, and large-diameter connecting rods ensure long-term engine durability.

Oil-impregnated bushings enhance durability and extend grease intervals to 500 hours (100 hours for the bucket joint). Reinforced resin thrust plates increase boom lube intervals to 500 hours.

Welded bulkheads within the boom resist torsional stress. Boom, arms, and mainframe are so tough, they’re warranted for three years or 10,000 hours.

Tungsten-carbide coating creates an extremely wear-resistant surface to protect the all-important bucket-to-arm joint.

1. With large idlers, rollers, and strutted links, the 200D and 200D LC’s sealed and lubricated undercarriage delivers long and reliable performance.

2. Rigid, reinforced D-channel side frames resist impact, providing maximum cab and component protection.

3. Perforations in the hood and side shields serve as a “ﬁ rst ﬁ lter,” preventing trash entry. Anything that passes through will also clear the cooler cores.

4. Box-section track frames, thick-plate single-sheet mainframe, and large swing bearing deliver rock-solid durability.

3 4

Nothi n g runs

l ike a Deer e,

because nothing

is built like one.

Unlike some excavators that scream for attention, the 200D and 200D LC’s hydraulically driven ondemand fan runs only as needed, reducing noise and fuel consumption. The highly efﬁ cient system keeps things running cool, even in high-trash environments and high altitudes. A direct-drive fan is

optional. Other traditional John Deere durability features include tungsten-carbide thermal-coated arm surfaces, oil-impregnated bushings, and weldedboom bulkhead s. For m axim um uptime , s hift after productive shift, month after month. When you know how they’re bui lt, y ou ’ll run a Dee re .

PAGES

8–9

Machine Information Center (MIC) captures and stores vital machine performance and utilization data to help improve uptime, productivity, and proﬁ t.

Auto-idle automatically reduces engine speeds when hydraulics aren’t in use, making the most of every precious drop of fuel.

Large, easy-to-open doors provide quick access to service items. Lube banks, ﬁ lters, and checkpoints are grouped for added convenience.

Large fuel tank and 500and 5,000-hour engine and hydraulic oil-service intervals enable the 200D LC to work longer between stops for service.

Fluid-level sight gauges are conveniently located and can be checked at a glance.

PAGES

10–11

Uncov e r ne w wa ys to

keep co sts d own.

As with all John Deere machines, the 200D and 200D LC are loaded with features that make them hassle free to service and low cost to maintain. Large, easy-to-open service doors and easyaccess service points make quick work of the daily routine. Remote-mounted vertical oil and

1. Vertical spin-on engine oil and fuel/water ﬁ lters in the right rear compartment allow ground-level servicing.

4. Fresh-air cab ﬁ lter is quickly serviced from outside the cab where it’s more likely to get done.

2. Easy-to-navigate LCD color monitor tracks up to 14 maintenance intervals and lets an operator check any of 32 machine operating parameters at the touch of a button.

5. Wide-ﬁ n spacing lets trash easily pass through cores to resist plugging. Hinged, swing-out coolers provide additional access.

fuel ﬁ lters and e xtende d eng i ne an d hy d rau li c oi l change in te r v als minimize main ten an ce, to o. Plu s the Machin e Information Cente r , a state-of -the-art LCD color monitor , and ﬂ uid-sample ports help you make timely decisions abou t machine upkeep — and maximize uptime, prod u ctivi ty, and proﬁ ts.

3. Centralized lube banks place difﬁ cult-to-lube zerks within easy reach, for faster greasing with less mess.

6. Remote diagnostic and ﬂ uid-sample ports located in the pump compartment help speed preventative maintenance and troubleshooting.

2 3

5 6

Specifications

Engine 200D / 200D LC

Manufacturer and Model ......................John Deere 6068H

Non-Road Emission Standards ..................certified to EPA Tier 3 emissions

Net Power (ISO 9249) .........................159 hp (119 kW) @ 2,000 rpm

Cylinders ..................................6

Displacement ...............................414 cu. in. (6.8 L)

Off-Level Capacity ...........................100% (45 deg.)

Aspiration ..................................turbocharged, air-to-air charge air cooler

Cooling

Cool-on-demand hydraulic-driven, suction-type fan with remote-mounted drive

Powertrain

Maximum Travel Speed

Low ...................................2.2 mph (3.5 km/h)

High. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4 mph (5.5 km/h)

Hydraulics

Open center, load sensing

Main Pumps ...............................2 variable-displacement axial-piston pumps

Maximum Rated Flow .....................2 x 56.0 gpm (2 x 212 L/m)

Pilot Pump ................................one gear

Maximum Rated Flow .....................7.9 gpm (30 L/m)

Pressure Setting .........................580 psi (3999 kPa)

System Operating Pressure

Implement Circuits .......................4,980 psi (34 336 kPa)

Travel Circuits ...........................4,980 psi (34 336 kPa)

Swing Circuits ...........................4,980 psi (34 336 kPa)

Power Boost ............................5,270 psi (36 335 kPa)

Controls ..................................pilot levers, short stroke, low effort; hydraulic pilot controls with shutoff lever

Cylinders

Heat-treated, chrome-plated, polished cylinder rods; hardened-steel (replaceable bushings) pivot pins Bore Rod Diameter Stroke

Boom (2) ..................................4.72 in. (120 mm) 3.35 in. (85 mm) 49.61 in. (1260 mm)

Arm (1) ....................................5.31 in. (135 mm) 3.74 in. (95 mm) 58.07 in. (1475 mm)

Bucket (1) .................................4.53 in. (115 mm) 3.15 in. (80 mm) 41.73 in. (1060 mm)

Electrical

Batteries ..................................2 x 12 volt

Reserve Capacity ............................440 min.

Alternator Rating ............................80 amp

Work Lights ...............................2 halogen (one mounted on boom, one mounted on frame)

Undercarriage 200D 200D LC

Planetary final drives with axial-piston motors

Carrier Rollers (per side) ......................2 2

Track Rollers (per side) .......................7 8

Shoes (per side) .............................46 49

Drawbar Pull ...............................45,620 lb. (20 711 kg) 45,620 lb. (20 711 kg)

Track

Adjustment .............................hydraulic hydraulic

Guides .................................center center

Chain ..................................sealed and lubricated sealed and lubricated

PAGES

12–13

Swing Mechanism 200D / 200D LC

CENTERLINE OF SWING

GROUND LINE

C D

B’

A’

Swing Speed ...............................13.3 rpm

Swing Torque ...............................50,662 lb.-ft. (68 900 Nm)

Ground Pressure 200D 200D LC

Triple Semi-Grouser Shoes

24 in. (600 mm) .........................6.90 psi (47.6 kPa) 6.87 psi (47.4 kPa)

28 in. (700 mm) .........................6.10 psi (42.1 kPa) 6.08 psi (41.9 kPa)

32 in. (800 mm) .........................5.30 psi (36.5 kPa) 5.30 psi (36.5 kPa)

Serviceability 200D /200D LC

Refill Capacities

Fuel Tank ..............................106 gal. (400.0 L)

Cooling System ..........................27.6 qt. (26.1 L)

Engine Oil with Filter ......................24 qt. (23.0 L)

Hydraulic Tank ..........................36 gal. (135.0 L)

Hydraulic System .........................63.4 gal. (240.0 L)

Gearbox

Propel (each) .........................7.2 qt. (6.8 L)

Swing ..............................7.0 qt. (6.2 L)

Pump Drive ..........................1.1 qt. (1.0 L)

Operating Weights 200D 200D LC

With Full Fuel Tank; 175-lb. (79 kg) Operator; 42-in. (1065 mm), 1.19-cu.-yd. (0.91 m 1,951-lb. (886 kg) Heavy-Duty Bucket; 9-ft. 7-in. (2.91 m) Arm; 10,463-lb. (4750 kg) Counterweight; and 32-in. (800 mm) Triple

Semi-Grouser Shoes ......................48,617 lb. (22 072 kg) 49,940 lb. (22 673 kg)

Optional Components Undercarriage with Triple Semi-Grouser Shoes

24 in. (600 mm) .........................14,873 lb. (6752 kg) 16,196 lb. (7353 kg)

28 in. (700 mm) .........................15,733 lb. (7143 kg) 17,056 lb. (7743 kg)

32 in. (800 mm) .........................16,381 lb. (7437 kg) 17,704 lb. (8038 kg)

One-Piece Boom (with arm cylinder) .............3,815 lb. (1732 kg) 3,815 lb. (1732 kg)

Arm with Bucket Cylinder and Linkage

7 ft. 11 in. (2.42 m) .......................2,044 lb. (928 kg) 2,044 lb. (928 kg)

9 ft. 7 in. (2.91 m) ........................2,181 lb. (990 kg) 2,181 lb. (990 kg)

Boom Lift Cylinders (2) Total Weight .............750 lb. (341 kg) 750 lb. (341 kg)

42-in. (1065 mm), 1.19-cu.-yd. (0.91 m

Duty Bucket .............................1,951 lb. (886 kg) 1,951 lb. (886 kg)

Counterweight (standard) ......................10,463 lb. (4750 kg) 10,463 lb. (4750 kg)

) Heavy-

Operating Dimensions 200D 200D LC

Arm Length Arm Length Arm Length Arm Length 7 ft. 11 in. (2.42 m) 9 ft. 7 in. (2.91 m) 7 ft. 11 in. (2.42 m) 9 ft. 7 in. (2.91 m)

Arm Force with 42-in. (1065 mm) Heavy-Duty

Bucket with Power Boost ...................27,877 lb. (124.0 kN) 22,924 lb. (102.0 kN) 27,877 lb. (124.0 kN) 22,924 lb. (102.0 kN)

Bucket Digging Force with 42-in. (1065 mm)

1.19-cu.-yd. (0.91 m

with Power Boost. . . . . . . . . . . . . . . . . . . . . . . . . 29,099 lb. (129.4 kN) 29,099 lb. (129.4 kN) 29,099 lb. (129.4 kN) 29,099 lb. (129.4 kN)

Lifting Capacity Over Front at Ground Level

20-ft. (6.1 m) Reach with Power Boost ........14,607 lb. (6632 kg) 13,223 lb. (6003 kg) 14,533 lb. (6598 kg) 14,248 lb. (6469 kg)

A Maximum Reach ........................30 ft. 11 in. (9.43 m) 32 ft. 7 in. (9.92 m) 30 ft. 11 in. (9.43 m) 32 ft. 7 in. (9.92 m)

A| Maximum Reach at Ground Level ...........30 ft. 4 in. (9.25 m) 32 ft. 0 in. (9.75 m) 30 ft. 4 in. (9.25 m) 32 ft. 0 in. (9.75 m)

B Maximum Digging Depth ..................20 ft. 3 in. (6.18 m) 21 ft. 11 in. (6.68 m) 20 ft. 3 in. (6.18 m) 21 ft. 11 in. (6.68 m)

B| Maximum Digging Depth at 8-ft. (2.44 m)

Flat Bottom ............................19 ft. 6 in. (5.95 m) 21 ft. 4 in. (6.50 m) 19 ft. 6 in. (5.95 m) 21 ft. 4 in. (6.50 m)

C Maximum Cutting Height ..................31 ft. 9 in. (9.67 m) 32 ft. 11 in. (10.04 m) 31 ft. 9 in. (9.67 m) 32 ft. 11 in. (10.04 m)

D Maximum Dumping Height .................22 ft. 5 in. (6.83 m) 23 ft. 7 in. (7.18 m) 22 ft. 5 in. (6.83 m) 23 ft. 7 in. (7.18 m)

E Minimum Swing Radius ...................10 ft. 9 in. (3.28 m) 10 ft. 5 in. (3.18 m) 10 ft. 9 in. (3.28 m) 10 ft. 5 in. (3.18 m)

F Maximum Vertical Wall ...................17 ft. 5 in. (5.30 m) 19 ft. 8 in. (5.99 m) 17 ft. 5 in. (5.30 m) 19 ft. 8 in. (5.99 m)

G Tail Swing Radius .......................9 ft. 0 in. (2.75 m) 9 ft. 0 in. (2.75 m) 9 ft. 0 in. (2.75 m) 9 ft. 0 in. (2.75 m)

) Heavy-Duty Bucket

Machine Dimensions 200D 200D LC

Arm Length Arm Length Arm Length Arm Length 7 ft. 11 in. (2.42 m) 9 ft. 7 in. (2.91 m) 7 ft. 11 in. (2.42 m) 9 ft. 7 in. (2.91 m)

A Overall Length ............................31 ft. 6 in. (9.60 m) 31 ft. 3 in. (9.53 m) 31 ft. 6 in. (9.60 m) 31 ft. 3 in. (9.53 m)

B Overall Height ............................10 ft. 5 in. (3.18 m) 9 ft. 8 in. (2.95 m) 10 ft. 5 in. (3.18 m) 9 ft. 8 in. (2.95 m)

C Rear-End Length/Swing Radius ...............9 ft. 0 in. (2.75 m) 9 ft. 0 in. (2.75 m)

D Distance Between Idler/Sprocket Centerline .....11 ft. 0 in. (3.35 m) 12 ft. 0 in. (3.67 m)

E Undercarriage Length ......................13 ft. 8 in. (4.17 m) 14 ft. 8 in. (4.46 m)

200D / 200D LC

F Counterweight Clearance ...................3 ft. 5 in. (1031 mm)

G Upperstructure Width ......................8 ft. 11 in. (2.71 m)

H Cab Height ..............................9 ft. 8 in. (2.95 m)

I Track Width with Triple Semi-Grouser Shoes ....24 in. (600 mm) /

28 in. (700 mm) / 32 in. (800 mm)

J Gauge Width .............................7 ft. 10 in. (2.39 m)

K Ground Clearance .........................18 in. (450 mm)

L Overall Width with Triple Semi-Grouser Shoes

24 in. (600 mm) .......................9 ft. 10 in. (2.99 m)

28 in. (700 mm) .......................10 ft. 2 in. (3.09 m)

32 in. (800 mm) .......................10 ft. 6 in. (3.19 m)

Lift Charts

Boldface italic type indicates hydraulic-limited capacities; lightface type indicates stability-limited capacities, in lb. (kg). Ratings are at bucket lift hook, using 1.12-cu.-yd. (0.86 m3) bucket; standard counterweight, situated on firm, level, uniform supporting surface. Figures do not exceed 87 percent of hydraulic capacity or 75 percent of weight needed to tip machine.

Load Point 10 ft. (3.05 m) 15 ft. (4.57 m) 20 ft. (6.10 m) 25 ft. (7.62 m)

Height Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side

200D with 9-ft. 7-in. (2.91 m) arm and 28-in. (700 mm) triple semi-grouser shoes

20 ft. (6.10 m) 8,048 (3651) 8,048 (3651) 15 ft. (4.57 m) 8,970 (4069) 8,970 (4069) 8,574 (3889) 6,523 (2959)

10 ft. (3.05 m) 13,847 (6281) 13,847 (6281) 10,757 (4879) 9,161 (4155) 9,329 (4232) 6,290 (2853) 5 ft. (1.52 m) 18,108 (8214) 13,135 (5958) 12,766 (5791) 8,578 (3891) 9,515 (4316) 6,004 (2723) Ground Line 20,308 (9212) 12,435 (5640) 13,103 (5943) 8,139 (3692) 9,255 (4198) 5,765 (2615) –5 ft. (–1.52 m) 14,425 (6543) 14,425 (6543) 20,412 (9259) 12,245 (5554) 12,866 (5836) 7,925 (3595) 9,120 (4137) 5,641 (2559) –10 ft. (–3.05 m) 23,940 (10 859) 23,940 (10 859) 18,971 (8605) 12,337 (5596) 12,873 (5839) 7,931 (3597) 9,183 (4165) 5,699 (2585) –15 ft. (–4.57 m) 20,943 (9500) 20,943 (9500) 15,628 (7089) 12,683 (5753) 11,249 (5102) 8,204 (3721)

200D with 9-ft. 7-in. (2.91 m) arm and 32-in. (800 mm) triple semi-grouser shoes

20 ft. (6.10 m) 8,048 (3651) 8,048 (3651) 15 ft. (4.57 m) 8,970 (4069) 8,970 (4069) 8,574 (3889) 6,581 (2985)

10 ft. (3.05 m) 13,847 (6281) 13,847 (6281) 10,757 (4879) 9,237 (4190) 9,329 (4232) 6,348 (2879) 5 ft. (1.52 m) 18,108 (8214) 13,244 (6007) 12,766 (5791) 8,653 (3925) 9,603 (4356) 6,062 (2750) Ground Line 20,308 (9212) 12,545 (5690) 13,223 (5998) 8,214 (3726) 9,344 (4238) 5,822 (2641) –5 ft. (–1.52 m) 14,425 (6543) 14,425 (6543) 20,412 (9259) 12,354 (5604) 12,985 (5890) 8,001 (3629) 9,209 (4177) 5,698 (2585) –10 ft. (–3.05 m) 23,940 (10 859) 23,940 (10 859) 18,971 (8605) 12,446 (5645) 12,992 (5893) 8,007 (3632) 9,272 (4206) 5,756 (2611) –15 ft. (–4.57 m) 20,943 (9500) 20,943 (9500) 15,628 (7089) 12,792 (5802) 11,249 (5102) 8,279 (3755)

200D LC with 7-ft. 11-in. (2.42 m) arm and 32-in. (800 mm) triple semi-grouser shoes

20 ft. (6.10 m) 9,001 (4083) 9,001 (4083) 15 ft. (4.57 m) 11,212 (5086) 11,212 (5086) 9,795 (4443) 9,795 (4443) 9,278 (4208) 7,199 (3265)

10 ft. (3.05 m) 15,341 (6959) 15,341 (6959) 11,500 (5216) 10,132 (4596) 9,847 (4467) 7,008 (3179) 5 ft. (1.52 m) 13,340 (6051) 9,589 (4349) 10,677 (4843) 6,755 (3064) Ground Line 20,586 (9338) 14,165 (6425) 14,533 (6592) 9,216 (4180) 10,682 (4845) 6,557 (2974) –5 ft. (–1.52 m) 20,010 (9076) 14,109 (6400) 14,669 (6654) 9,073 (4115) 10,607 (4811) 6,488 (2943) –10 ft. (–3.05 m) 20,215 (9169) 20,215 (9169) 18,022 (8175) 14,284 (6479) 13,444 (6098) 9,153 (4152) –15 ft. (–4.57 m) 17,763 (8057) 17,763 (8057) 13,813 (6265) 13,813 (6265)

200D LC with 9-ft. 7-in. (2.91 m) arm and 24-in. (600 mm) triple semi-grouser shoes

20 ft. (6.10 m) 8,048 (3651) 8,048 (3651) 15 ft. (4.57 m) 8,970 (4069) 8,970 (4069) 8,574 (3889) 7,158 (3247)

10 ft. (3.05 m) 13,847 (6281) 13,847 (6281) 10,757 (4879) 10,049 (4558) 9,329 (4232) 6,922 (3140) 5 ft. (1.52 m) 18,108 (8214) 14,549 (6599) 12,766 (5791) 9,454 (4288) 10,309 (4676) 6,632 (3008) Ground Line 20,308 (9212) 13,829 (6273) 14,248 (6463) 9,007 (4086) 10,390 (4713) 6,389 (2898) –5 ft. (–1.52 m) 14,425 (6543) 14,425 (6543) 20,412 (9259) 13,633 (6184) 14,529 (6590) 8,789 (3987) 10,251 (4650) 6,263 (2841) –10 ft. (–3.05 m) 23,940 (10 859) 23,940 (10 859) 18,971 (8605) 13,728 (6227) 14,028 (6363) 8,795 (3989) 10,316 (4679) 6,321 (2867) –15 ft. (–4.57 m) 20,943 (9500) 20,943 (9500) 15,628 (7089) 14,083 (6388) 11,249 (5102) 9,073 (4115)

PAGES

14–15

Lift Charts (continued) 200D / 200D LC

3.0

(2.3)

2.0

(1.5)

2,000 2,200 2,600 3,200

lb./cu. yd.

kg/m

BUCKET SIZE cu. yd. (m

)

1,600 3,400

1.0

(0.8)

1.5

(1.0)

2.5

(1.9)

3.5

(2.7)

1,200 1,400 1,800 2,400 2,800 3,000 3,600

Wet Peat

Topsoil

Coal

Caliche

Shale

Dry Sand

Dry Clay

Limestone

Wet Earth

Wet Clay, Granite

Moist Sand

Wet Sand

Wet Sand, Gravel

1300

Contact your John Deere dealer for optimum bucket and attachment selections. These recommendations are for general conditions and average use. Does not include optional equipment such as thumbs or couplers. Larger buckets may be possible when using light materials, for flat and level operations, less compacted materials, and volume loading applications such as mass excavation applications in ideal conditions. Smaller buckets are recommended for adverse conditions such as off-level applications, rocks, and uneven surfaces. Bucket capacity indicated is SAE heaped.

700 800 900 1000 1100 1200

2000

1400 1500 1600 1700 1800 1900

2100

Deere 7-ft. 11-in. (2.42 m) Arm

Deere 9-ft. 7-in. (2.91 m) Arm

Load Point 10 ft. (3.05 m) 15 ft. (4.57 m) 20 ft. (6.10 m) 25 ft. (7.62 m)

Height Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side

200D LC with 9-ft. 7-in. (2.91 m) arm and 28-in. (700 mm) triple semi-grouser shoes

20 ft. (6.10 m) 8,048 (3651) 8,048 (3651) 15 ft. (4.57 m) 8,970 (4069) 8,970 (4069) 8,574 (3889) 7,288 (3306)

10 ft. (3.05 m) 13,847 (6281) 13,847 (6281) 10,757 (4879) 10,221 (4636) 9,329 (4232) 7,052 (3199) 5 ft. (1.52 m) 18,108 (8214) 14,799 (6713) 12,766 (5791) 9,625 (4366) 10,309 (4676) 6,762 (3067)

Ground Line 20,308 (9212) 14,079 (6386) 14,248 (6463) 9,178 (4163) 10,593 (4805) 6,519 (2957) –5 ft. (–1.52 m) 14,425 (6543) 14,425 (6543) 20,412 (9259) 13,883 (6297) 14,751 (6691) 8,960 (4064) 10,455 (4742) 6,393 (2900) –10 ft. (–3.05 m) 23,940 (10 859) 23,940 (10 859) 18,971 (8605) 13,978 (6340) 14,028 (6363) 8,966 (4067) 10,316 (4679) 6,451 (2926) –15 ft. (–4.57 m) 20,943 (9500) 20,943 (9500) 15,628 (7089) 14,334 (6502) 11,249 (5102) 9,244 (4193)

200D LC with 9-ft. 7-in. (2.91 m) arm and 32-in. (800 mm) triple semi-grouser shoes

20 ft. (6.10 m) 8,048 (3651) 8,048 (3651) 15 ft. (4.57 m) 8,970 (4069) 8,970 (4069) 8,574 (3889) 7,389 (3352)

10 ft. (3.05 m) 13,847 (6281) 13,847 (6281) 10,757 (4879) 10,353 (4696) 9,329 (4232) 7,152 (3244) 5 ft. (1.52 m) 18,108 (8214) 14,992 (6800) 12,766 (5791) 9,758 (4426) 10,309 (4676) 6,862 (3113)

Ground Line 20,308 (9212) 14,272 (6474) 14,248 (6463) 9,310 (4223) 10,750 (4876) 6,619 (3002) –5 ft. (–1.52 m) 14,425 (6543) 14,425 (6543) 20,412 (9259) 14,076 (6385) 14,751 (6691) 9,092 (4124) 10,612 (4814) 6,493 (2945) –10 ft. (–3.05 m) 23,940 (10 859) 23,940 (10 859) 18,971 (8605) 14,171 (6428) 14,028 (6363) 9,098 (4127) 10,316 (4679) 6,552 (2972) –15 ft. (–4.57 m) 20,943 (9500) 20,943 (9500) 15,628 (7089) 14,527 (6589) 11,249 (5102) 9,376 (4253)

Buckets

A full line of buckets is offered to meet a wide variety of applications. Digging forces are with power boost. The buckets have an adjustable bushing for side clearance, with the exception

of the ditching bucket. Tooth selection inclused either the John Deere Tanggs, Standard, Tiger, Twin Tiger, Abrasion panel or Flare tooth or the ESCO (Vertalok) Standard, TIger, Twin Tiger or Flare tooth. Replaceable cutting edges are available through John Deere parts. Optional side cutters add 6 inches (150 mm) to bucket widths. Capacities are SAE heaped ratings.

Bucket Bucket Bucket Arm Dig Force Arm Dig Force Bucket Type Bucket Width Capacity Weight Dig Force 7 ft. 11 in. (2.42 m) 9 ft. 7 in. (2.91 m) Tip Radius No. Teeth in. mm cu. yd. m

lb. kg lb. kN lb. kN lb. kN in. mm

General-Purpose 30 760 0.79 0.60 1,432 650 28,904 128.6 27,806 123.7 22,873 101.7 58.00 1473 4 High Capacity 36 915 1.00 0.76 1,621 736 28,904 128.6 27,806 123.7 22,873 101.7 58.00 1473 5 42 1065 1.22 0.93 1,790 813 28,904 128.6 27,806 123.7 22,873 101.7 58.00 1473 5 48 1220 1.43 1.09 1,976 897 28,904 128.6 27,806 123.7 22,873 101.7 58.00 1473 6

Heavy Duty 24 610 0.52 0.40 1,197 543 29,099 129.4 27,877 124.0 22,924 102.0 57.61 1463 4 30 760 0.71 0.54 1,369 622 29,099 129.4 27,877 124.0 22,924 102.0 57.61 1463 4 36 915 0.90 0.69 1,559 708 29,099 129.4 27,877 124.0 22,924 102.0 57.61 1463 5 42 1065 1.09 0.83 1,731 786 29,099 129.4 27,877 124.0 22,924 102.0 57.61 1463 5 48 1220 1.29 0.99 1,921 872 29,099 129.4 27,877 124.0 22,924 102.0 57.61 1463 6

Heavy-Duty 24 610 0.56 0.43 1,424 646 28,904 128.6 27,806 123.7 22,873 101.7 58.00 1473 4 High Capacity 30 760 0.76 0.58 1,593 723 28,904 128.6 27,806 123.7 22,873 101.7 58.00 1473 4 36 915 0.97 0.74 1,782 809 28,904 128.6 27,806 123.7 22,873 101.7 58.00 1473 5 42 1065 1.19 0.91 1,951 886 28,904 128.6 27,806 123.7 22,873 101.7 58.00 1473 5

Ditching 60 1524 1.14 0.87 1,271 577 40,279 179.2 31,133 138.5 25,271 112.4 41.62 1057 0

Bucket Selection Guide*

200D / 200D LC EXCAVATORS

Key: l Standard equipment s Optional equipment *See your John Deere dealer for further information.

200D / LC

Engine

Certified to EPA Tier 3 emissions

l l Auto-idle system l Automatic belt tension device l Batteries (two 12 volt), 440-min. reserve capacity l Coolant recovery tank l Dual-element dry-type air filter l Electronic engine control l Enclosed fan guard (conforms to SAE J1308) l Engine coolant to –34°F (–37°C) l Fuel filter with water separator l Full-flow oil filter l Turbocharger with charge air cooler l Muffler, under hood, with vertical curved end

exhaust stack

l Cool-on-demand hydraulic-driven fan l 500-hour engine oil-change interval l 100% (45 deg.) off-level capability l Engine-oil-sampling valve

 s Hydraulic fan reverser  s Engine coolant heater  s Direct-drive fan

Hydraulic System

Reduced-drift valve for boom down, arm in

l l Auxiliary hydraulic valve section l Spring-applied, hydraulically released automatic

swing brake

l Auxiliary hydraulic-flow adjustments through

monitor

l Auto power lift l 5,000-hour hydraulic oil-change interval l Hydraulic-oil-sampling valve

 s Auxiliary hydraulic lines  s Auxiliary pilot and electric controls  s Hydraulic filter restriction indicator kit  s Load-lowering control device  s Single-pedal propel control  s Control pattern-change valve

Undercarriage

Planetary drive with axial piston motors

l l Propel motor shields l Spring-applied, hydraulically released automatic

propel brake

l Track guides, front idler and center l Two-speed propel with automatic shift l Upper carrier rollers (2) l Sealed and lubricated track chain

Undercarriage (continued)

 s Triple semi-grouser shoes, 24 in. (600 mm)  s Triple semi-grouser shoes, 28 in. (700 mm)  s Triple semi-grouser shoes, 32 in. (800 mm)

Upperstructure

Right- and left-hand mirrors

l l Vandal locks with ignition key: Cab door / Fuel

cap / Service doors / Toolbox

l Debris-screening side panel l Remote-mounted engine oil and fuel filters

Front Attachments

Centralized lubrication system

l l Dirt seals on all bucket pins l Less boom and arm l Oil-impregnated bushings l Reinforced resin thrust plates l Tungsten carbide thermal coating on arm-to-

bucket joint

 s Arm, 7 ft. 11 in. (2.42 m)  s Arm, 9 ft. 7 in. (2.91 m)  s Attachment quick-couplers  s Boom cylinder with plumbing to mainframe for

less boom and arm

 s Buckets: Ditching / Heavy duty / Heavy-duty

high capacity / Side cutters and teeth

 s Material clamps  s Super-long fronts

Operator’s Station

Adjustable independent control positions (levers-

to-seat, seat-to-pedals)

l AM/FM radio l Auto climate control/air conditioner, 20,000

Btu/hr. (5.9 kW), with heater and pressurizer

l Built-in operator’s manual storage compartment

and manual

l Cell-phone power outlet, 12 volt, 60 watt, 5 amp l Coat hook l Deluxe suspension cloth seat with 4-in. (100 mm)

adjustable armrests

l Floor mat l Front windshield wiper with intermittent speeds l Gauges (illuminated): Engine coolant / Fuel l Horn, electric l Hour meter, electric l Hydraulic shutoff lever, all controls l Hydraulic warm-up control

200D / LC

Operator’s Station (continued)

l Interior light l Large cup holder l Machine Information Center (MIC) l Mode selectors (illuminated): Power modes –

three / Travel modes – two with automatic shift / Work mode – one

l Multifunction, color LCD monitor with: Diagnostic

capability / Multiple-language capabilities / Main tenance tracking / Clock / System monitoring with alarm features: Auto-idle indicator, engine air cleaner restriction indicator light, engine check, engine coolant temperature indicator light with audible alarm, engine oil pressure indicator light with audible alarm, low-alternator-charge indicator light, low-fuel indicator light, fault-code alert indicator, fuel-rate display, wiper-mode indicator, work-lights-on indicator, and work mode indicator

 s Monitor system with alarm features: Hydraulic

oil filter restriction indicator light

l Motion alarm with cancel switch (conforms to

SAE J994)

l Power-boost switch on right console lever l Auxiliary hydraulic control switches in right con-

sole lever

l SAE two-lever control pattern l Seat belt, 2 in. (51 mm), retractable

 s Seat belt, 3 in. (76 mm), non-retractable

l Tinted glass l Transparent tinted overhead hatch l Hot/cold beverage compartment

 s Air-suspension heated seat  s 24- to 12-volt D.C. radio convertors, 10 amp  s Circulation fan  s Protection screens for cab front, rear, and side  s Window vandal protection covers

Electrical

80-amp alternator

l l Blade-type multi-fused circuits l Positive terminal battery covers

 s Cab extension wiring harness  l JDLink

One mounted on frame

Ultimate wireless communication

system with 3 years of service

Lights

Work lights: Halogen / One mounted on boom /

CONTROL OWNING AND OPERATING COSTS

Customer Personal Service (CPS) is part of John Deere’s proactive, fix-before-fail strategy on machine maintenance that will help control costs, increase profits, and reduce stress. Included in this comprehensive lineup of ongoing programs and services are: Fluid analysis program – tells you what’s going on inside all of your machine’s major components so you’ll know if there’s a problem before you see a decline in performance. Fluid analysis is included in most extended coverage and preventive-maintenance agreements. Component life-cycle data – gives you vital information on the projected life span of components and lets you make informed decisions on machine maintenance by telling you approximately how many hours of use you can expect from an engine, transmission, or hydraulic pump. This information can be used to preempt catastrophic downtime by servicing major components at about 80 percent of their life cycle. Preventive Maintenance (PM) agreements – give you a fixed cost for maintaining a machine for a given period of time. They also help you avoid downtime by ensuring that critical maintenance

Net engine power is with standard equipment including air cleaner, exhaust system, alternator, and cooling fan at test conditions per ISO9249. No derating is required up to 10,000-ft. (3050 m) altitude.

DKAX200DLC Litho in U.S.A. (09-05)

Specifications and design subject to change without notice. Wherever applicable, specifications are in accordance with SAE standards. Except where otherwise noted, these specifications are based on units with 9-ft. 7-in. (2.91 m) arms; 42-in. (1065 mm),

1.19-cu. yd. (0.91 m (79 kg) operators; and a 200D LC unit with 32-in. (800 mm) triple semi-grouser shoes.

work gets done right and on schedule. On-site preventive maintenance service performed where and when you need it helps protect you from the expense of catastrophic failures and lets you avoid waste-disposal hassles. Extended coverage – gives you a fixed cost for machine repairs for a given period of time so you can effectively manage costs. Whether you work in a severe-service setting or just want to spread the risk of doing business, this is a great way to custom-fit coverage for your operation. And an extended coverage contract also travels well because it’s backed by John Deere and is honored by all Deere construction dealers. Customer Support Advisors (CSAs) – Deere believes the CSA program lends a personal quality to Customer Personal Service (CPS). Certified CSAs have the knowledge and skills for helping make important decisions on machine maintenance and repair. Their mission is to help you implement a plan that’s right for your business and take the burden of machine maintenance off your shoulders.

), 1,951-lb. (886 kg) heavy-duty buckets; 10,463-lb. (4750 kg) counterweights; full fuel tanks; and 175-lb.

John Deere 200D, 200D LC Specifications

Specifications and Main Features

Frequently Asked Questions

User Manual