JMGO DLP-Link GL1800 User Manual

DLP-Link 3D Glasses

User Manual

Product Overview

Thank you for your choosing JmGO qualty 3D product. The 3D glasses in the package are
designed to which 3D contents with DLP 3D ready projectors and DLP 3D TVs which using
DLP-Link synchronization technology.The 3D glasses powered by advanced LCD shutter
technology and anti-interence communcation technology will bring you a vivid and
wonderful 3D experience.

Glasses Cloth
User Manual

3D Glasses

USB Cable

Package Content

Package Feature

USB Interface

USB Interface

LCD lens

LED Light

LED Light

LED Light

Power Button

Power Button

ON:Press the Power Button one time.
OFF:Keep pressing the power button for 3 seconds.

Blue LED light about 1.5 second: Powered on;
Blue LED flash 3 times: Powered off;
Blue LED light flashes 2 times each 10s after 5 times: Low battery,please charge;the red LED light
appear red when rechasrge,while the red LED is off when the battery is full.

In order to ensure better reception,try being on the projector or DLP television transmitters, and
to ensure no foreign objects when using front

Do not scratch the surface of the liquid crystal shutters with a sharp tool and do not clean it using
chemicals.

Portable folding design for easy storage.

Singal Recevier

Singal Recevier

Earpieces

Earpieces

Charge the 3D glasses by connecting the USB port of your TV or computer with the USB cable.

Operation Guide

Turn ON the 3D glasses:press and release the power buttin,Blue LED lights on for 1.5s indicating
that the 3D glasses are powered on;
Turn OFF the 3D glasses:press and hold the power button for 1.5s,Blue LED lights flashes 3 times
indicating that the 3D glasses are powered on;
Low battery warning:Blue LED light fflashes 2 times each 10s after 5 times;

L/R eye Rotation:in the working mode,press the power button,then the left and right eyes are
rotatied.

Brightness
contrast

Power supply

Workable time

Environment
requirement

Signal

Transmission

1000:1±200

Working current

N.W.

Rechargeable
Li-ion Battery

Around 40 hours/charge

96Hz/100Hz/120Hz/144Hz

Work temperature

0~45℃

-10~60℃Stock temperature

38±2%

34.5g

<1.2mA

Use range

DLP-Link

8m

Shutters Liquid Crystal

Frequency

Notice:For a better performance of the battery,please full charge the 3D glasses before
the first time using and charge the glasses at lest one time within 6 months.

Glasses Specification

Troubleshooting

1.The 3D glasses are used for 3D content viewing only.Do not use them for general eye
wear purpose,such as sunglasses and general eye wear,Doing so many result in injury.

2.The glasses are powered by a rechargeable lithium-polymer battery,please charge the
glasses with a standard 5V USB connection and do not damage the battery or may result
in injury or fire.

3.Do not place the glasses in a location exposed to direct sunlight,heat,fire or water,this
may result in product malfunction or fire.

4.Clean the 3D glasses with a clean,lint free,dry,soft cloth.Any chemical cleaning agent
spray on the 3D glasses may damage the product surface or cause product malfunction.

5.Do not apply force to the 3D glasses.Dropping or bending may damage the product.

6.When watching a 3D video,do not place anything fragile nearby.Involuntary movement or
surprised reaction may occur as a result of certain 3D content which result in surrounding
objects being broken or hurt yourself.

7.Please watch 3D content in the signal covered area and make sure no object is placed
close to the front of your glasses.

8.50Hz or 60Hz magnetic fluorescent lamp may cause flicker to your 3D glasses.Turn off
the lamp if this happens.

9.Do not use the 3D glasses if there are any wire exposed or cracks to the lens.

10.Do not let your child to remove the battery of 3D glasses and swallow it.if this happen,
consult a doctor immediately.

1.We recommend pregnant women,people with heart disease or epilepsy and people who
are easily nauseous should not watch 3D content.

2.Due to the stereoscopic effects and the uncompleted visual development of younger
children under 3 years of age we recommend you not allow them to watch 3D content.
Watching 3D for a long time may affect there visual develppment.

3.Watching 3D content for a long time may cause headache or eyestrain to you,please stop
watching if you have any uncomfotable feeling and take a rest immediately.Please
consult a doctor if the feeling do not release.

4.Some indiviauals may experience seizure or other complications when exposed to certain
visual images,including flashing lights or patterns that may appear in a video or games.If
you or any of your relatives have a history of seizures or epilepsy consult a doctor before
watching.

The 3D glasses will activate their Auto OFF and Auto run intelligently in the following
conditions.

1.The 3D glasses are standby(for a period of 5 minutes)when powered on and they will turn
into working mode once received the 3D SYNC signal during standby mode.otherwise,the
glasses will automatically turn off with the blue LED flashes 3 times.

2.If the 3D glasses become disconnected with the signal because of:1>incorrect distance
and or angle.2>input source changed.3>switched to 2D mode,they will automatically work
for a period of 3s.The glasses will resume working once a 3D SYNC signal is signal is
received.otherwise,the glasses will enter into standby mode(for 5 minutes).

Q1:What can i do if there is no 3D effect after i put on and turn on the 3D glasses?
Try this:

1.please check if the DLP projector/DLP TV setup is in 3D mode or not.

2.Check the battery volume of your 3D glasses,please charge it in time if low in power.

3.Make sure your position is in the SYNC signal coverage so that the glasses can receive
the signal.
Q2:Why do the lenses flash when watching 3D films?
Try this:

1.Please charge the 3D glasses immediately if the battery is seriously low.

2.If there is light or other signal interference in the watching surroundings,please turn off
interference source.

Caution

Safety Precaution

Kindly Reminder