How it Works
Jetway Computer
Loading...
NC73
User Manual
42 pgs1.22 Mb0

Jetway Computer NC73 User Manual

NO. G03-NC73-F
Revision: 1.0
Release date: April, 2011
TECHNICAL MANUAL
Of
VIA VX900H Chipset
Based
Trademark:
* Specifications and Information contained in this documentation are furnished for information use only, and are
subject to change at any time without notice, and should not be construed as a commitment by manufacturer.
Environmental Protection Announcement
Do not dispose this electronic device into the trash while discarding. To minimize pollution and ensure environment protection of mother earth, please recycle.
i
TABLE OF CONTENT
ENVIRONMENTAL SAFETY INSTRUCTION ........................................................................... iii
USER‟S NOTICE ....................................................................................................................... iv
MANUAL REVISION INFORMATION ....................................................................................... iv
ITEM CHECKLIST ..................................................................................................................... iv
CHAPTER 1 INTRODUCTION OF THE MOTHERBOARD
1-1 FEATURE OF MOTHERBOARD ................................................................................ 1
1-2 SPECIFICATION ......................................................................................................... 2
1-3 LAYOUT DIAGRAM .................................................................................................... 3
CHAPTER 2 HARDWARE INSTALLATION
2-1 JUMPER SETTING ..................................................................................................... 8
2-2 CONNECTORS AND HEADERS ................................................................................ 11
2-2-1 CONNECTORS ............................................................................................. 11
2-2-2 HEADERS ..................................................................................................... 13
CHAPTER 3 INTRODUCING BIOS
3-1 ENTERNING SETUP ................................................................................................... 19
3-2 GETTING HELP .......................................................................................................... 19
3-3 THE MAIN MENU ........................................................................................................ 19
3-4 STANDARD BIOS FEATURES .................................................................................. 21
3-5 ADVANCED BIOS FEATURES .................................................................................. 23
3-5-1 CPU FEATURE ............................................................................................... 24
3-6 ADVANCED CHIPSET FEATURES ........................................................................... 25
3-7 INTEGRATED PHERIPHRALS .................................................................................. 26
3-7-1 ONBOARD SATA FUNCTION ........................................................................ 27
3-7-2 ONBOARD DEVICE FUNCTION ..................................................................... 28
3-7-3 ONBOARD SUPER IO FUNCTION ................................................................. 29
3-8 POWER MANAGEMENT SETUP ............................................................................... 30
3-9 PNP/PCI CONFIGURATIONS ..................................................................................... 32
3-10 PC HEALTH STATUS ................................................................................................. 32
3-11 MISCELLANEOUS CONTROL ................................................................................... 34
3-12 PASSWORD SETTING ............................................................................................... 35
3-13 LOAD OPTIMIZED /STANDARDDEFAULTS ............................................................ 36
3-14 SAVE AND EXIT SETUP/EXIT WITHOUT SAVING ................................................... 37
ii
Environmental Safety Instruction
Avoid the dusty, humidity and temperature extremes. Do not place the product in
any area where it may become wet.
0 to 60 centigrade is the suitable temperature. (The figure comes from the request
of the main chipset)
Generally speaking, dramatic changes in temperature may lead to contact
malfunction and crackles due to constant thermal expansion and contraction from
the welding spots’ that connect components and PCB. Computer should go
through an adaptive phase before it boots when it is moved from a cold environment to a warmer one to avoid condensation phenomenon. These water drops attached on PCB or the surface of the components can bring about phenomena as minor as computer instability resulted from corrosion and oxidation from components and PCB or as major as short circuit that can burn the components. Suggest starting the computer until the temperature goes up.
The increasing temperature of the capacitor may decrease the life of computer.
Using the close case may decrease the life of other device because the higher temperature in the inner of the case.
Attention to the heat sink when you over-clocking. The higher temperature may
decrease the life of the device and burned the capacitor.
iii
USER‟S NOTICE
COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE MANUFACTURER.
THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE THIS MOTHER-BOARD SERIES AND WE DO ASSURE THIS MANUAL MEETS USER‟S REQUIREMENT BUT WILL CHANGE, CORRECT ANY TIME WITHOUT NOTICE. MANUFACTURER PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, AND WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF USE OF DATA, INTERRUPTION OF BUSINESS AND THE LIKE).
PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY NOT BE REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE COMPANIES, AND THEY ARE
USED ONLY FOR IDENTIFICATION OR EXPLANATION AND TO THE OWNER‟S BENEFIT, WITHOUT
INTENT TO INFRINGE.
Manual Revision Information
Reversion Revision History Date
1.0 First Edition April, 2011
Item Checklist
Motherboard
User’s Manual
DVD for motherboard utilities
Cable(s)
I/O Back panel shield
iv
1
Chapter 1
Introduction of the Motherboard
1-1 Feature of motherboard
VIA VX900H chipset.
Onboard VIA Nano CPU, with low power consumption and never denies high
performance
Support FSB 800MHz
Support DDRIII SODIMM 1066 MHz up to 8GB
Onboard dual REALTEK RTL 8111E Gigabit Ethernet PCI-E LAN Chip
Integrated VIA 1705 CE 6-channel HD audio CODEC
Support USB 2.0 data transport demands
Support PCI slot
Support CPU Smart FAN
Supports ACPI S3 Function
Support watchdog function
2
Spec
Description
Design
Mini-ITX form factor; PCB size: 17.0x17.0cm
Chipset
VIA VX900H
CPU
VIA Nano processor
Memory Socket
DDRIII DIMM slot x2
Support 1066 MHz DDRIII DIMM
Expandable to 8 GB
Expansion Slot
PCI slot x1
Integrate SATAII
Support two internal serial ATAII 3 Gb/s connectors
Support RAID 0/1 function
Dual Gigabit LAN
Integrated with dual RTL8111E Gigabit PCI-E LAN chips
Support Fast Ethernet LAN function of providing
10Mb/100Mb/1000Mb Ethernet data transfer rate
Audio
VIA VT 1705CE 6-channel Audio Codec integrated
Audio driver and utility included
BIOS
AMI 8MB Flash ROM
Multi I/O
PS/2 keyboard connector x 1
PS/2 mouse connector x 1
Serial port connector x1
VGA port connector x1
HDMI port connector x 1
USB 2.0 port x 4 and USB 2.0 header x2
RJ-45 LAN connector x2
Audio connector x1 (Line-out, Line-in, MIC)
Front panel audio header x1
CDIN header x1
GPIO header x1
Speaker header x1
PWRLED header x1
Front panel header x1
1-2 Specification
3
Parallel port header x1
Serial port header x1
LVDS header x1 and LVDS inverter x1
MIC-IN
VGA Port
RJ-45 LAN Ports
USB Ports
HDMI Port
Serial Port
Line-OUT
PS/2
Mouse Port
Line-IN/
Optical SPDIF OUT
PS/2
Keyboard Port
1-3 Layout Diagram
Rear IO Diagram
4
ATX Power connector
Serial Port
Over VGA Port
RJ-45 over USB Ports
HDMI Port
Front Panel
Audio Header
CDIN Header
Parallel Port Header
LVDS1 Header
Inverter1
PCI Slot
Front Panel Header
DDRIII Slot x1
USB Headers
Power LED Header
Speaker Header
COM2 Header
GPIO Header
SYSFAN2 Header
CPUFAN1 Header
VIA Nano
Series CPU
VIA VX900H
TX-RX COM1
SATAII Connectors
PS2 KB/Mouse
Ports
RJ-45 over USB Ports
Audio Connector
SYSFAN1 Header
NC73 Motherboard Internal Diagram
5
JBAT
JP5
JP9
JP2
JP4
JP6
Motherboard Jumper Position
6
Jumper
Name
Description
JP2
LVDS PVCC 5V/3.3V Select
3-pin Block
JP3
LVDS Inverter 12V/5V Select
3-pin Block
JP4
KB/UL2 Power On Function Setting
3-pin Block
JP5
USB 1/2 Power On Function Setting
3-pin Block
JP6
UL1 Power On Function Setting
3-pin Block
JP9
COM2 Power RS232 Function Select
6-pin Block
JBAT
CMOS RAM Clear Function Setting
3-pin Block
Connector
Name
Description
USB (from UL1/UL2)
USB 2.0 Port
4-pin Connector COM1
Serial Port COM Connector
9-pin Connector
VGA
Video Graphic Attach Connector
15-pin Female
HDMI
High-Definition Multimedia Connector
19-pin Connector
LAN (from UL1/UL2)
RJ-45 LAN Connectors
8-pin Connector
AUDIO
Line Out /Line In /MIC Audio Connector
3-phone Jack ATXPWR
ATX Power Connector
24-pin Block
SATA1/SATA2
Serial ATAII Connectors
7-pin Connector
Jumper
Connectors
7
Header
Name
Description
FP_AUDIO
Front panel audio Header
9-pin Block
CDIN
CD Audio-In Header
4-pin Block
USB1
USB Header
9-pin Block
USB2
USB Header
9-pin Block
SPEAK
Speaker Header
4-pin Block
PWRLED
Power LED
3-pin Block
JW_FP (Front Panel Header)
PWR LED/ HD LED/ /Power
Button /Reset
9-pin Block CPUFAN1,SYSFAN1/2
FAN Speed Headers
3-pin Block
PARALLEL1
Parallel Port Header
25-pin Block
GPIO_CON
GPIO Header
10-pin Block
COM2
Serial Port Header
9-pin Block
LVDS
LVDS Header
36-pin Block
INVERTER
LVDS Inverter Connector
7-pin Block
Headers
8
2-3 closed : LVDS PVCC 3.3V
JP2
1-2 closed: LVDS PVCC 5V
JP2
1
3
1
3
1-2 closed: Inverter 12V selected
2-3 closed: Inverter 5V select
JP3
JP3
1
3
1
3
Chapter 2
Hardware Installation
2-1 Jumper Setting
(1) JP2 (3-pin): LVDS PVCC 5V / 3.3V Function setting
(2) JP3 (3-pin): LVDS INVERTER power 12V / 5VSelect
Loading...
+ 29 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use