JET JG-150, JG-150A, JG-300A, JG-75A, JG-300 Operating Instructions and Parts Manual

Operating Instructions and Parts Manual
3/4, 1-1/2, and 3 Ton Grip Pullers
Models JG-75A, JG-150A, JG-300A
Model JG-75A shown
WALTER M EIE R (Manufa c turing) Inc.
427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-286575 Ph.: 800-274-6848 Revision A1 01/2012 www.waltermeier.com Copyright © 2012 Walter Meier (Manufacturi ng) Inc .
Warranty and Service
Walter Meier (Manufacturing) Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these Walter Meier Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET® tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
MORE INFORMATION
Walter Meier is consistently adding new products to the line. For complete, up-to-date product information, check with your local Walter Meier distributor, or visit waltermeier.com.
WARRANTY
JET products carry a limited warranty which varies in duration based upon the product (MW = Metalworking, WW = Woodworking).
WHAT IS COVERED?
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.
WHO IS COVERED?
This warranty covers only the initial purchaser of the product.
WHAT IS THE PERIOD OF COVERAGE?
The general JET warranty lasts for the time period specified in the product literature of each product.
WHAT IS NOT COVERED?
Five Year Warranties do not cover woodworking (WW) products used for commercial, industrial or educational purposes. Woodworking products with Five Year Warranties that are used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.
HOW TO GET SERVICE
The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the location nearest you, please call 1-800-274-6848.
You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we will repair or replace the product, or refund the purchase price, at our option. We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the defect resulted from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the product. In the event you choose to have the product returned, you will be responsible for the shipping and handling costs of the return.
HOW STATE LAW APPLIES
This warranty gives you specific legal rights; you may also have other rights which vary from state to state.
LIMITATIONS ON THIS WARRANTY
WALTER MEIER (MANUFACTURING) INC., LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
WALTER MEIER SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECI AL, OR CONSEQUENTIAL DAMAGES ARISING FRO M THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
Walter Meier sells through distributors only. The specifications in Walter Meier catalogs are given as general information and are not binding. Members of Walter Meier reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever. JET® branded produc ts are not sold in Canada by Walter Meier.
2
Table of Contents
Warranty and Servic e .............................................................................................................................. 2
Warning ................................................................................................................................................... 3
Introduction ............................................................................................................................................. 4
Specifica tions .......................................................................................................................................... 4
Replacement Parts .................................................................................................................................. 4
Unpac king ............................................................................................................................................... 5
Contents of the Shipping Container ...................................................................................................... 5
Assembly and Set- Up .............................................................................................................................. 5
Pre-Lubrication .................................................................................................................................... 5
Inser ting Wire Ro p e ............................................................................................................................. 5
Operation ................................................................................................................................................ 6
Maintenance ............................................................................................................................................ 7
JG-75A (3/4 Ton Grip Puller) ................................................................................................................ 8
Parts Lis t: J G-7 5 A (3 /4 To n Gr ip P u l ler ) ............................................................................................... 9
JG-150A (1-1/2 Ton Grip Puller) ......................................................................................................... 10
Parts List: JG- 150A ( 1- 1/2 T on Grip P uller ) ........................................................................................ 11
JG-300A (3 Ton Grip Puller) ............................................................................................................... 12
Parts List: JG- 300A ( 3 Ton Grip Puller ) .............................................................................................. 13
Warning
1. Read and understand owner’s manual before operating grip puller. Familiarize yourself with the
content of the warning label on your puller.
2. Do not exceed rated capaci ty.
3. Supporting structure used with this device must provide adequate support to handle all puller
operations plus the weight of the puller and attached equipment. If in doubt, consult a registered structural engineer.
4. Never use handle ext ensi ons (cheaters).
5. Do not use with twisted, kinked, frayed or otherwise dam aged wir e r ope.
6. Do not use if grip puller is damaged or malfunctioning.
7. Do not lift people or loads ov er people. Always keep people clear from load path.
8. When using grip puller to lift vertically, mak e sure hook is cent er ed under the puller.
9. Do not use as a tow line.
10. Do not use with a hook that is open or twisted, or without safety latch.
11. Never run wire rope over a sharp edge.
12. Never leave a suspended load unattended.
13. Do not swing a suspended load.
14. A lways inspect the puller before each use. Replace if any component is damaged or malfunctioning.
15. A lways use gloves when handling wire rope. Do not wear loose clothi ng whic h c an bec om e entangled
in moving parts.
16. Do not use this grip puller in an explosive environment.
17. Giv e your work undivided attention. Looking around, carrying on a conversation and “horse-play” are
careless acts that can result in serious injury.
18. Do not operate this tool whil e tired or under the influence of drugs, al c ohol or any medication.
19. Failure to comply wit h the above warni ngs may result in personal inj ur y and/or pr oper ty damage.
3
Introduction
This manual is provided by Walter Meier (Manufacturing) Inc., covering the safe operation and maintenance pr ocedures for a JET Grip Puller. This m anual contains instruct ions on install ation, safety precautions, general operati ng procedures, maint enance instruc tions and parts breakdown. T his tool has been designed and constructed to provide years of trouble free operation if used in accordance with instructi ons set forth i n this manual . If there are any questions or comments, pl ease contact ei ther your local supplier or W alter Meier. Walter Meier can also be reached at our web site: www.waltermeier.com .
Specifications
Stock Number* ................................................ 286575 ..............................286515 ....................... 286530
Model Number ................................................. JG-75A ........................... JG-150A ..................... JG-300A
Pulling Capacity (ton).............................................. 3/4 ................................. 1-1/2 ................................. 3
Lifting Capacity (lbs.) .......................................... 1,650 ................................ 3 , 300 .......................... 6,600
Handle Length Mi n./ M ax. (i n.) ............... 17-3/4 / 29-1/8 ...................31-1/2 / 47-1/4 ............ 31-1/2 / 47-1/4
Distance Per Stroke (in.) ............................................ 2 .................................. 2.17 ............................ 1.10
Dimensions (LxWxH)(in.) ............ 16-3/4 x 2-1/2 x 9-1/4 ............ 21-1/2 x 3-7/8 x 11 ...... 26 x 4-1/2 x 12-3/4
Wire Rope Diameter (in.) ...................................... 5/16 .................................. 7/16 .............................. 5/8
Approximate Net Weight (lbs.) ................................. 36 ..................................... 48 ............................. 123
*NOTE: The above stock numbers do not include the wire rope. To include a wire rope with the grip puller, add a “K” to the end of the st oc k number.
The above specifications were current at the time this manual was publi shed, but bec ause of our policy of continuous improvement, Walter M eier reserves the right to change specifications at any time and without prior notice, wit hout incurring obligati ons.
Replacement Parts
Replacement P ar t s are listed on pages 8 through 13. To order par ts or reach our servic e depar tment, call 1-800-274-6848 Monday throu gh F ri day (see our webs it e for business hour s). Hav i ng the Model Num ber and Serial Number of your machine available when you call will allow us to serve you quickly and accurately.
4
Unpacking
Open shipping cont ainer and check f or shippi ng damage. Report any damage immediately to your distributor and shipping agent. Do not discard any shipping material until the Grip Puller is assembled and operating properl y.
Compare the c ontents of your cont ai ner with t he following parts list to make sure all parts are intact. Missing par ts, if any, should be reported to your distri butor. Read the instructi on manual thoroughly for assembly, maintenance and safety instructions.
Contents of the Shipping Containe r
1 Grip Puller 1 Telescopic Handle 1 Swivel Hook 1 Wire Rope, 5/16” diameter (sold and
packaged separately) 1 Owner's Manual 1 Warranty Card
Figure 1
EATURES OF THE GRIP PULLER
F
(1-1/2 ton model s hown)
Assembly and Set-Up
Pre-Lubrication
Before proceeding with assembly, lubricate the puller as follows: Apply oil to the puller mechanisms while continuously operating the reverse lever (see Figure 1). This will help spread oil to int ernal parts. Use special care to oil pawls and links well. A wear-resistant oil is recommended.
Without proper lubrication,
the pawls will fail to engage the wire rope, and the wire rope will not move.
Inserting Wire Rope
1. Attach the eye of the swivel hook to the
fastening bolt on the puller. Be sure to install
the cotter pin through the fastening bolt.
Attach the hook to a suitable anchorage
point, as shown in Fi gur e 2.
2. Make sure the forward lever has been
pushed away fr om the hook.
3. Release the clamp by pushing the clamp
lever securely into the notch on the puller
body.
Figure 2
5
4. Insert the end of the wire rope (the end is
welded to provide easy entrance) into the
rope inlet at the rear of t he puller. Feed the
wire rope through until it emerges at the
other end.
5. Pull the wire rope through by hand to take
up the slack and make sure that the exit
point is not obstruct ed.
6. While keepi ng the wir e r ope taut, push down
on the clamp lever and allow it to spring
back to its natural position. This will engage
the wire rope within the puller.
7. Mount the telescopic handle to either the
forward or reverse lever, according to the
action desired. Rotate the handle until it is
secure on the lever.
8. The puller is now ready to operat e.
Operation
The grip puller uses standard ASA wire rope and may be used in any position to lift, pull, lower or stretch heav y loads. Before att empting operation of this product, you should become thoroughly f amili ar wi t h the warni ngs on page 3.
To operate the grip pull er:
1. Place load cabl e( s) in the middle of the hook
and inside the s afety latch. DO NOT attach
any cables outsi de the safety lat ch on ei ther
the puller hook or the wire rope hook. See
Figure 5.
2. Lay out the wire rope correctly without
twisting. Twisting the wire rope reduces its
strength. See Fi gur e 6.
3. To send the wire rope forward, set the
telescopic handl e on the forward lever and
move it back and fort h.
Figure 3
Figure 4
4. To send the wire rope backward, set the
telescopic handl e on the reverse lever and
move it back and fort h. IMPORTANT: A shear pin (#25 i n the parts list)
is install ed i n the f or ward lev er. If the l oad bei ng handled is too excessive for the puller’s capacity, the shear pin is designed to break. If this occurs, decrease the load or use other equipment of higher pulling capacity. The broken shear pin is easil y replac ed using one of the spare shear pins whic h are found withi n the hand grip of the 1-1/2 and 3-ton pullers (see Figure 1) and in the telescopic handle of the 3/4­ton puller.
Figure 5
Figure 6
6
Before storing the grip puller:
5. After use, remove the wire rope from the
main body by setti ng the clamp lever into the
notch (disengage the cl am p, then pul ling t he
wire rope from the inlet side at the rear of
the puller.
6. After the wire rope is removed, push the
clamp lev er out of the notch and l et it snap
back to its original position. If the clamp
lever is kept in the notch for an extended
time period, its spring may become
stretched.
7. Wipe off any sand or water from the puller
body, including internal mechanisms, and
the wire rope, then apply oil liberally to both.
8. Store the grip puller away from rain, dew,
high humidity areas or around acidic
chemicals, which will promote rusting.
Make sure hook s are not def orm ed and that the puller body has not been warped or dam aged.
Use care to prevent the wir e r ope f r om kinking. If the rope is lef t shaped lik e a basket or is ki nked many turns at a single point, its strength is greatly dimi nished and may result in failure.
Replace the wire rope immediately if:
The thickness of the rope becomes less than half of the original value due to abrasion.
The rope ex hibits basket-l ike shapes, kinks, or any abnormal deformation.
The rope is given an exceptionally heavy shock during operati on; this can fatigue the rope even if the load is within puller capacity.
The entire rope i s napped due to many small cuts.
Maintenance
Make frequent and careful inspections of the puller. Make sure puller and wire rope are sufficiently oiled, and that they are free of any sand, dirt, dust or other obstruction or abnormality .
The eye section (thimble) of the wire rope becomes elli ptic al in shape.
The clamp is deformed.
Troubleshooting
Trouble Probable Cause Remedy
Insufficient lubrication. Oil the puller and wire rope.
Wire rope will not move in either direction.
Wire rope will not advance duri ng normal operati on, or advances with great difficulty.
Puller is dirty.
Clamp lever is not in proper position.
Clamp lever is not in proper position.
Pawls are not lubricated.
Load is beyond puller capacity. Decrease load. There is an obstructi on within the wire
rope’s path.
Disassemble and cl ean out dust, dirt or other foreign matter. Oil the puller after reassembly.
Release clamp lever from notch, and allow it to return to engaged posi t ion.
Release clamp lever from notch, and allow it to return to engaged posi t ion.
Oil the pawl link ages properly; the pawls must engage the wir e r ope.
Remove the wire rope; cl ean and oil the puller and the wir e rope.
Clamp lever will not engage the wire rope properly.
The reverse lever is engagi ng the wire rope.
Spring on clamp lev er has becom e stretched.
Check the position of the rev er se lever. Correct as needed.
Replace spring.
7
JG-75A (3/4 Ton Grip Puller)
8
Parts List: JG-75A (3/4 Ton Grip Puller)
Index No. P art No. Description Size Qty
1 ............... J G75A -1 ..................Ca se , Right ........................................................................................... 1
2 ............... TS-2285121 .............Flat Head Screw .................................................M5x12 ........................ 1
3 ............... JG75A-3 ..................Washe r.................................................................................................. 1
4 ............... JG75A-4 ..................Case, Left .............................................................................................. 1
5 ............... J G75A -5 ..................Na me Plate .......................................................................... ................. 1
6 ............... JG75A-6 ..................Rivet ...................................................................M2x6 .......................... 4
7 ............... JG75A-7 ..................Fastening Bolt Assembly ....................................................................... 1
8 ............... JG75A-8 ..................Shear Pin .............................................................................................. 2
9 ............... JG75A-9 ..................Telescopic Handle ................................................................................. 1
10 ............. TS-1551041 .............Lock Was h e r ......................................................M6 .............................. 6
11 ............. TS-1503091 .............Socket Head Cap Screw .....................................M6x40 ........................ 6
12 ............. JG75A-12 ................Square Nut .........................................................M6 .............................. 6
13 ............. JG75A-13 ................Cotter Pin Assembly .............................................................................. 1
14 ............. JG75A-14 ................Wire Rope Guide Sleeve ....................................................................... 1
15 ............. JG75A-15 ................Release Lever ....................................................................................... 1
16 ............. JG75A-16 ................Push Link, Left....................................................................................... 1
17 ............. JG75A-17 ................Push Link, Right .................................................................................... 1
18 ............. JG75A-18 ................Reverse (Backwards Action) Lever ........................................................ 1
19 ............. JG75A-19 ................Shaft ..................................................................................................... 1
20 ............. JG75A-20 ................Retaining Ring ....................................................Ø6 .............................. 4
21 ............. JG75A-21 ................Shaft ..................................................................................................... 1
22 ............. JG75A-22 ................Pin......................................................................................................... 2
23 ............. JG75A-23 ................Thrust Pin .............................................................................................. 8
24 ............. JG75A-24 ................Forward Action Lever Assembly............................................................. 1
25 ............. JG75A-8 ..................Shear Pin .............................................................................................. 1
26 ............. JG75A-26 ................Axle ....................................................................................................... 2
27 ............. JG75A-27 ................Front Slide Assembly ............................................................................. 1
28 ............. JG75A-28 ................Spring Guide ......................................................................................... 2
29 ............. JG75A-29 ................Spring.................................................................................................... 2
30 ............. JG75A-30 ................Bottom Clamp........................................................................................ 2
31 ............. JG75A-31 ................Top Clamp............................................................................................. 2
32 ............. JG75A-32 ................Back Slide Assembly ............................................................................. 1
33 ............. JG75A-33 ................Swivel Hook .......................................................................................... 1
34 ............. JG75A-34 ................Rubber Handle Grip ............................................................................... 1
35 ............. JG75A-35 ................Cap ....................................................................................................... 1
................. JG75A- WL ...............Warning Label (not shown) .................................................................... 1
................. 286574 ....................3/4T Wire R
ope, 66 Ft (not shown) ....................................................... 1
9
JG-150A (1-1/2 Ton Grip Puller)
10
Parts List: JG-150A (1-1/2 Ton Grip Puller)
Index No. P art No. Description Size Qty
1 ............... JG150A -1 ................C as e, Right ........................................................................................... 1
2 ............... TS-2285121 .............Flat Head Screw .................................................M5x12 ........................ 1
3 ............... JG75A-3 ..................Washe r.................................................................................................. 1
4 ............... JG150A -4 ................C as e, Left .............................................................................................. 1
6 ............... JG75A-6 ..................Rivet ...................................................................M2x6 .......................... 4
7 ............... JG150A-7 ................Fastening Bolt Assembly ....................................................................... 1
8 ............... JG150A -8 ................Shear Pin .............................................................................................. 5
9 ............... JG150A -9 ................Te les cop ic Handle ................................................................................. 1
10 ............. TS-1551041 .............Lock Was h e r ......................................................M6 .............................. 6
11 ............. TS-1503121 .............Socket Head Cap Screw .....................................M6x55 ........................ 6
12 ............. JG75A-12 ................Square Nut .........................................................M6 .............................. 6
13 ............. JG75A-13 ................Cotter Pin Assembly .............................................................................. 1
14 ............. JG150A-14 ..............Wire Rope Guide Sleeve ....................................................................... 1
15 ............. JG150A-15 ..............Release Lever ....................................................................................... 1
16 ............. JG150A-16 ..............Push Link, Left....................................................................................... 1
17 ............. JG150A-17 ..............Push Link, Right .................................................................................... 1
18 ............. JG150A-18 ..............Reverse (Backwards Action) Lever ........................................................ 1
19 ............. JG150A-19 ..............Sha ft ..................................................................................................... 1
20 ............. JG150A-20 ..............Re ta inin g R ing ....................................................Ø9 .............................. 4
21 ............. JG150A-21 ..............Sha ft ..................................................................................................... 1
22 ............. JG150A-22 ..............Pin ...................................................................................................... ... 2
23 ............. JG150A-23 ..............Thru st Pin ............................................................................................ 10
24 ............. JG150A-24 ..............Forward Action Lever Assembly............................................................. 1
25 ............. JG150A-8 ................Shear Pin .............................................................................................. 1
26 ............. JG150A-26 ..............Axle ....................................................................................................... 2
27 ............. JG150A-27 ..............Fron t S l ide ............................................................................................. 2
28 ............. JG150A-28 ..............Spr ing.................................................................................................... 2
29 ............. JG150A-29 ..............Bottom Clamp ........................................................................................ 2
30 ............. JG150A-30 ..............Top Cla mp............................................................................................. 2
31 ............. JG150A-31 ..............Back Slide Assembly ............................................................................. 1
32 ............. JG
33 ............. JG150A-33 ..............Rubber Handle Grip ............................................................................... 1
34 ............. JG150A-34 ..............Ca p ....................................................................................................... 2
35 ............. JG150A-35 ..............Clamp Plate, Short ................................................................................ 4
36 ............. JG150A-36 ..............Clamp Plate, Long ................................................................................. 4
37 ............. JG150A-37 ..............Re ta inin g R ing ....................................................Ø12 ............................ 8
38 ............. JG150A-38 ..............Sha ft ..................................................................................................... 4
39 ............. JG150A-39 ..............Swivel Hook .......................................................................................... 1
................. JG75A- WL ...............Warning Label (not shown) .................................................................... 1
................. 286514 ....................1-1/2T Wire Rope, 66 Ft (not shown) .................................................... 1
150A-3 2 ..............H and Grip Assembly .............................................................................. 1
11
JG-300A (3 Ton Grip Puller)
12
Parts List: JG-300A (3 Ton Grip Puller)
Index No. P art No. Description Size Qty
1 ............... JG300A -1 ................C as e, Right ........................................................................................... 1
2 ............... JG300A -2 ................Fla t Head Screw .................................................M5x8 .......................... 1
3 ............... JG75A-3 ..................Washe r.................................................................................................. 1
4 ............... JG300A -4 ................C as e, Left .............................................................................................. 1
6 ............... JG75A-6 ..................Rivet ...................................................................M2x6 .......................... 4
7 ............... JG300A-7 ................Fastening Bolt Assembly ....................................................................... 1
8 ............... JG300A -8 ................Shear Pin .............................................................................................. 5
9 ............... JG150A -9 ................Te les cop ic Handle ................................................................................. 1
10 ............. TS-1551061 .............Lock Was h e r ......................................................M8 .............................. 6
11 ............. TS-1504131 .............Socket Head Cap Screw .....................................M8x70 ........................ 6
12 ............. JG300A-12 ..............Square Nut .........................................................M8 .............................. 6
13 ............. JG75A-13 ................Cotter Pin Assembly .............................................................................. 1
14 ............. JG300A-14 ..............Wire Rope Guide Sleeve ....................................................................... 1
15 ............. JG300A-15 ..............Release Lever ....................................................................................... 1
16 ............. JG300A-16 ..............Push Link, Left....................................................................................... 1
17 ............. JG300A-17 ..............Push Link, Right .................................................................................... 1
18 ............. JG300A-18 ..............Reverse (Backwards Action) Lever ........................................................ 1
19 ............. JG300A-19 ..............Sha ft ..................................................................................................... 1
20 ............. JG300A-20 ..............Re ta inin g R ing ....................................................Ø8 .............................. 2
21 ............. JG300A-21 ..............Sha ft ..................................................................................................... 1
22 ............. JG300A-22 ..............Pin ...................................................................................................... ... 2
23 ............. JG300A-23 ..............Thru st Pin .............................................................................................. 8
24 ............. JG300A-24 ..............Forward Action Lever Assembly............................................................. 1
25 ............. JG300A-8 ................Shear Pin .............................................................................................. 1
26 ............. JG300A-26 ..............Axle ....................................................................................................... 2
27 ............. JG300A-27 ..............Fron t S l ide ............................................................................................. 2
28 ............. JG300A-28 ..............Spr ing.................................................................................................... 2
29 ............. JG300A-29 ..............Bottom Clamp ........................................................................................ 2
30 ............. JG300A-30 ..............Top Cla mp............................................................................................. 2
31 ............. JG300A-31 ..............Back Slide Assembly ............................................................................. 1
32 ............. JG
33 ............. JG150A-33 ..............Rubber Handle Grip ............................................................................... 1
34 ............. JG150A-34 ..............Ca p ....................................................................................................... 2
35 ............. JG300A-35 ..............Clamp Plate, Short ................................................................................ 4
36 ............. JG300A-36 ..............Clamp Plate, Long ................................................................................. 4
37 ............. JG150A-37 ..............Re ta inin g R ing ....................................................Ø12 ............................ 8
38 ............. JG300A-38 ..............Sha ft ..................................................................................................... 4
39 ............. JG300A-39 ..............Pin ...................................................................................................... ... 2
40 ............. JG300A-40 ..............Ro ller .................................................................................................... 1
41 ............. JG300A-41 ..............Sha ft ..................................................................................................... 1
44 ............. JG300A-44 ..............Soc ke t Head Cap Screw .....................................M8x85 ........................ 1
45 ............. JG150A-20 ..............Re ta inin g R ing ....................................................Ø9 .............................. 2
46 ............. JG300A-46 ..............Swivel Hook .......................................................................................... 1
................. JG75A- WL ...............Warning Label (not shown) .................................................................... 1
................. 286529 ....................3T Wire Rope, 66 Ft (not shown) .......................................................... 1
150A-3 2 ..............H and Grip Assembly .............................................................................. 1
13
14
15
WALTER M EIE R (Manufa c turing) Inc.
427 New Sanford Road
LaVergne, Tennessee 37086
Phone: 800-274-6848 www.waltermeier.com
16
Loading...