®
Operation
How to Enjoy Your MCD 9424JA Marine
AM/FM Stereo Receiver/Compact Disc
Player with NOAA Weather Radio Receiver
and Flip-Over Security Panel
CH
MCD-9424JA
COMPACT
DIGITAL AUDIO
OPEN
VOL
VOLAS/PS
WB
BAND
SEL/
8 X OVERSAMPLING • 4 X 40 WATTS
®
ST
Welcome!
What you're holding in your hands is no ordinary owner's
manual. We've tried to make the instructions in this owner's
manual clear and easy to follow . If you take a few minutes to
look through it, you'll learn how to use all of the features on
your new Jensen marine stereo for maximum enjoyment.
For your Jensen stereo to work right, it must be installed
correctly . The enclosed installation manual will show you how
to install your new stereo like a pro. It's a good idea to read
all of these instructions before you begin the installation.
Most installations are straightforward and can be handled by
a do-it-yourselfer with the right tools, patience, and the ability
to follow instructions. But, do-it-yourself installation isn't for
everyone. If you still don't feel confident after reading this
book, consider turning the installation job over to someone
better suited to it.
Warranty Service
If your Jensen stereo should ever require service, you will
need to have the original dated receipt. If you ever need to
return the unit for any reason, always include the receipt with
the product.
W2
W1
1
W3
3
SHF
5
LOUD
2
RPT
DISP
4
SCN
PWR
6
MCD 9424JA Features
Basic Operation ................2
On/Off .................................. 2
Select Mode......................... 2
V olume................................. 2
Treble................................... 2
Bass.....................................3
Balance................................3
Fader....................................3
Bass Boost........................... 3
Set the Clock........................3
Optional Remote Control ..... 4
WeatherBand and Radio
Operation.............................5
Select a Weather Band........ 5
Select a Radio Band ............ 5
Select a Radio Station ......... 5
Preset Stations .................... 6
Automatically Store
Stations................................ 6
Preset Scan ......................... 6
CD Player Operation ........7
Insert and Eject CD...............
Skip Tracks ..........................7
Fast Forward and Fast
Reverse................................ 7
Repeat the same track......... 8
Shuffle: Play all tracks.......... 8
Scan (Preview all tracks) ..... 8
Pause CD.............................8
7
Technical Assistance
For technical assistance with the operation of the MCD 9424JA,
call 1-800-323-0221.
Optional Remote Control ..... 8
Troubleshooting ................9
Specifications
and Warranty......................9
®
VOL
VOL
Basic Operation
MCD 9424JA
BAND
VOL
VOLAS/PS
SEL/
ST
8 X OVERSAMPLING • 4 X 40 WATTS
OPEN
WB
On/Off
PWR
Press PWR button to turn the
MCD 9424JA on. Press PWR again
to turn it off.
Select Mode
Press SEL button to move display through
volume, treble, bass, balance and fader
functions. Use
adjust the selected mode. When mode has not
been adjusted for 3 seconds, display returns to
normal radio or CD display.
VOL
and
VOL
buttons to
®
VOL
COMPACT
DIGITAL AUDIO
CH
MCD-9424JA
Volume
SHF
W2
RPT
SCN
LOUD
2
DISP
4
PWR
6
W1
1
W3
3
5
Adjust volume by pressing
VOL
or
VOL
.
Treble
1
SEL/
1. Press SEL button two
times.
(Fader)
2
SEL/
(Balance)
SEL/
(Volume)
VOL
SEL/
SEL/
(Bass)
SEL/
(Treble)
2. Adjust Treble level
VOL
VOL
or
VOL
using
2
VOL
button.
+7 = maximum
–7 = minimum
MCD 9424JA
®
Bass
1
SEL/
VOL
2
VOL
Balance
1. Press SEL button
three times.
2. Adjust Bass level
VOL
using
VOL
or
button.
+7 = maximum
–7 = minimum
1
2
Fader
SEL/
VOL
VOL
1. Press SEL button five
times.
2. Adjust sound balance front
and rear using
VOL
F15 = Front speakers only
R15= Rear speakers only
button.
VOL
or
1
2
SEL/
VOL
1. Press SEL button four
times.
2. Adjust sound balance left
and right using
VOL
button.
VOL
or
Bass Boost
LOUD
Press LOUD button to increase the
bass output. LOUD appears in the
display.
Set the Clock
VOL
DISP
R15 = Right speaker only
L15 = Left speaker only
1
2
3 Sec
3 Sec
0
1
2
3
1. Press and hold DISP
button for 3 seconds
until display flashes.
2. Within 3 seconds, press
to change minutes,
to change hours.
M H
3
®
Optional Remote Control
MCD 9424JA
The MCD 9424JA can be controlled through an
optional wired remote control, MWR-20. The
remote control allows access to the most
common functions on the MCD 9424JA such as
Volume, Tune/Track selection, Power on/off,
AM/FM bands, Weather Band and Play/Pause
for CD Mode.
The MWR-20 looks like a standard dash gauge
and is designed to be installed in the dash
panel of your vessel.
The remote requires a standard 2 1/8" gauge
hole cutout.
4
MCD 9424JA
W eather Band and Radio
Operation
®
BAND
VOL
VOLAS/PS
SEL/
ST
8 X OVERSAMPLING • 4 X 40 WATTS
OPEN
WB
Select a Weather Band
The MCD 9424JA has a three channel NOAA
Weather Radio receiver . NOAA Weather Radio
broadcasts National Weather Service warnings,
watches, forecasts and other hazard information
24 hours a day. The channel freqencies are as
follows: W1=162.55, W2=162.4, W3=162.475.
WB
1
W1
2
1. Press WB to change radio to
weather radio receiver.
1
®
COMPACT
DIGITAL AUDIO
CH
MCD-9424JA
W1
W3
SHF
W2
LOUD
2
1
RPT
DISP
4
3
SCN
PWR
6
5
Select a Radio Band
BAND
Press BAND button to
change radio between three FM
bands and two AM bands. Each band stores
up to six preset stations.
Select a Radio Station
Options for selecting a station
W2
2
W3
3
2. Press W1, W2 and W3 to change
between three weather channels in your
area.
<1 Sec
>1 Sec
Touch
a or for less than one
second to move radio frequency
number up or down one step.
Press
or for more than one
second to move quickly through the
radio frequency numbers. The
numbers change until button is
released.
5
®
MCD 9424JA
Preset Stations
1
3
5
BAND
W3
ST
BAND
W2
2
Six numbered preset buttons
store and recall stations for
4
6
each band.
RPT
SCN
1. Select a band (if needed).
2. Select a station.
3
3.
Press
three seconds. The re-
3 Sec
ceiver beeps when station
is saved.
1. Select band (if needed).
W1
W3
SHF
Store a station:
1
2
3
Band
Recall a station:
1
a preset button for
CH
Preset
Station
Number
Automatically Store Stations
Select six strong stations and store them in
current band
1
BAND
2
AS/PS
1. Select a band (if needed).
Press
2.
AS/PS button for
more
than three seconds
(receiver beeps). The new
stations replace stations
already stored in that band.
>3 Sec
Preset Scan
Scan stations stored in current band
1
2
<3 Sec
BAND
AS/PS
1. Select a band (if needed).
Touch
2.
AS/PS for
less
than
three seconds. The radio
pauses for five seconds at
each station.
Touch
AS/PS
again to stop scanning when
desired station is reached.
2. Press a preset button to
select stored station.
2
W3
6
CH
3
MCD 9424JA
CD Player Operation
®
OPEN
WB
BAND
Insert and Eject CD
Press OPEN button to open flip-over
panel. Push a CD into slot and flip the
OPEN
panel up to close. The CD will begin
to play.
x
x
x
x
x
x
x
x
x
Insert CD
label side up
x
x
x
x
x
VOL
VOLAS/PS
SEL/
®
SHUFFLE SCANREPEAT
8 X OVERSAMPLING • 4 X 40 WATTS
COMPACT
DIGITAL AUDIO
MCD-9424JA
W1
W3
SHF
W2
LOUD
2
1
RPT
DISP
4
3
SCN
PWR
6
5
Skip Tracks
Press or to advance
to next track. Track numbers
show on display.
x
x
x
x
x
x
x
Fast Forward and Fast Reverse
Hold or to fast forward
or fast reverse CD. CD play
starts from when you release
the button.
Press OPEN to open flip-over panel.
Press
(eject) to stop CD play and
eject CD from slot. Receiver
switches to radio operation. Flip
panel up to close.
7
®
MCD 9424JA
Repeat the Same Track
RPT
4
Press RPT to continuously repeat
same track. Press again to stop
repeat.
Shuffle: Play all Tracks
SHF
5
Press SHF to play all tracks
on CD in random order one time.
Press again to stop shuffle play.
Scan (Preview all Tracks)
SCN
6
Press SCN to play first ten seconds
of each track on current CD. SCAN
appears in the display. Press again
to stop SCAN and listen to track.
Note:
• Do not expose CD player to extremely
high or low temperatures.
• Avoid splashing water directly on the unit.
• Unit is not "water proof".
Pause CD
Press to pause CD play. PAUS
shows in the display. Press
again to resume CD play.
8
MCD 9424JA
Troubleshooting
Problem Cause Corrective Action
ER-1 appears
on display
ER-2 appears
on display
ER-3 appears
on display
CD skips too
much
Can’t find
cause of
problem
Disc reading
malfunction
Disc loading
or eject
malfunction
High
temperature
Receiver
mount is not
solid or
backstrap
is not secure
Try a different disc. The
disc may be damaged
or dirty
Press RESET button.
Insert disc and try again
Wait until temperature
returns to normal
Check mounting and
backstrap, tighten if
needed
Call Jensen Technical
Assistance
(1-800-323-0221)
®
Specifications
CD Player
Signal/noise ratio .................................................................... >86 dB
Frequency response.................................................. 20 Hz - 20 kHz
Channel separation ................................................................ >65 dB
D/A converter ........................................................................ 1 Bit/CH
Weather Radio
Tuning range .............................................. NOAA weather channels
.......................................... 162.400, 162.475, 162.550
FM Tuner
Tuning range ....................................................87.5 MHz-107.9 MHz
FM mono sensitivity.................................................................12 dBf
50 dB quieting sensitivity (stereo) ........................................... 16 dBf
Stereo separation @ 1 kHz ......................................................40 dB
AM Tuner
Tuning range ........................................................ 530 kHz-1720 kHz
Amplifier
Total system power.................................................... 160 watts peak
Power output................................................................front: 2 x 40W
rear: 2 x 40W
General
Power supply ....................................... 11-16 VDC, negative ground
Speaker output impedance ............................................... 4-8 Ohms
Fuses ..................................... fast blow AGC (0.5 amp and 10 amp)
Dimensions .........................7" x 7" x 2" (178mm x 178mm x 51mm)
Specifications subject to change without notice.
Limited One Year Warranty–USA and Canada
Length of Warranty. This warranty from Recoton Mobile
Electronics shall be in effect for a period of one year from the date
of the first consumer purchase.
Persons Protected. This warranty will be enforceable by the
original owner and any subsequent owners during the warranty
period so long as proof of date of purchase from an authorized
Jensen dealer is presented whenever warranty service is
required.
What is Covered. Except as otherwise specified below, this
warranty covers all defects in material and workmanship in this
product. The following are not covered: damage resulting from
accident, misuse, abuse, neglect, product modification, improper
installation, incorrect line voltage, unauthorized repair or failure to
follow instructions supplied with the product; damage occurring
during shipment (claims must be presented to the carrier);
elimination of marine static
or other electrical interferences; any product purchased outside
USA or Canada, or on which the serial number has been
defaced, modified or removed.
How Y ou Can Get Service.
U.S. Purchasers. Please telephone Jensen at 1-800-323-4815.
We will either inform you of the name and address of an authorized Jensen repair station which will service the product or will
advise you to send the product to a factory service center.
Canadian Purchasers. The product should be returned to the
Jensen dealer from whom it was purchased and such dealer
either will service or arrange for service of the product.
If shipment of the product is required, it should be packed
securely . The original dated bill of sale must always be included
with the product as proof of warranty coverage.
What We Will Pay For. We will pay for all labor and material
expenses required to repair the product, but you must pay any
labor costs for the removal and/or installation of the product. If the
product is shipped for warranty service, you must prepay the initial
shipping charges, but Jensen will pay the return shipping charges
if the product is returned to an address inside the USA or Canada.
Limitation of Implied or Statutory Warranties and Conditions.
All implied or statutory warranties and conditions, including
warranties or conditions of merchantability, fitness for particular
purposes and non-infringement, are limited in duration to the
length of this warranty.
Exclusion of Certain Damages. Jensen’s liability is limited to the
repair or replacement, at our option, of any defective product and
shall not include incidental or consequential economic damages
of any kind.
Some states and/or provinces do not allow limitations on how long
an implied warranty lasts and/or do not allow the exclusion or
limitation of incidental or consequential damages, so the above
limitations and exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state and province to
province.
®
Recoton Mobile Electronics
A Division of Recoton Audio Corporation
A RECOT ON
®
COMP ANY
1090 Emma Oaks Trail
Lake Mary, Florida 32746
©1999 Recoton Audio Corporation
9
®
Installation
How to Install the MCD 9424JA Marine
AM/FM Stereo Radio/Compact Disc
Player
Final
3
Installation
(page 8)
1
2
Connect and
test radio
(pages 6 and 7)
Welcome!
What you're holding in your hands is no ordinary owner's
manual. We've tried to make the instructions in this book
clear and easy to follow.
For your Jensen stereo to work right, it must be installed
correctly. This manual will show you how to install your new
stereo like a pro. It's a good idea to read all of these
instructions before you begin the installation. Most
installations are straightforward and can be handled by a
do-it-yourselfer with the right tools, patience, and the ability
to follow instructions. But, do-it-yourself installation isn't for
everyone. If you still don't feel confident after reading this
book, consider turning the installation job over to someone
better suited to it.
Install wiring
(pages 4 and 5)
Contents
Installation.............................2
Before You Begin Installation..... 2
Tools and Supplies Needed....... 2
Speaker Requirements .............. 2
Important Installation Note......... 2
• Upgrading your System...... 2
Wiring....................................... 3
• Fuse Adapters .................... 3
Disconnect Battery..................... 3
Connect Wires ........................... 3
Wiring Diagram .......................... 4
Testing ....................................5
Reconnect Battery ..................... 5
Test Power Wiring...................... 5
T est Antenna Connection........... 5
Test Memory Wiring ................... 5
Set the Clock.............................. 5
Test Speaker Connections......... 6
Final Installation......................... 7
Protective Cover ........................ 7
Troubleshooting ...................8
• Securing Wires ................... 8
Reset Button .............................. 8
Specifications
and Warranty......................... 9
Warranty Service
If your Jensen stereo should ever require service, you will
need to have the original dated receipt. If you ever need to
return the unit for any reason, always include the receipt
with the product.
Technical Assistance
For technical assistance with the installation of the
MCD 9424JA, call 1-800-323-0221.
®
MCD 9424JA
Installation
Before You Begin Installation
Before you begin, you will need tools, supplies and adapters. It is best to make sure you have
everything you need before you take your dashboard apart.
T ools and Supplies Needed
Basic Installation:
• Flat and Phillips screwdrivers
• Wire cutters
• Wire strippers
• Tools to remove existing radio (screwdriver, socket wrench set or other tools)
• Electrical tape
Speaker Requirements
Only connect the MCD 9424JA to speakers
rated in the load impedance range of 4 to 8
ohms. Speakers with a load impedance less
than 4 ohms could damage the MCD 9424JA.
Important Installation Note
Professional Tip
Upgrading Your System
International Jensen makes a wide range
of marine stereo products that will make
your stereo system sound better, great or
INCREDIBLE!
Better Sound
Install a Jensen tape deck or CD player like
you’re doing now. High power units can make
your existing speakers sound better and play
louder.
Great Sound
Replace your existing speakers with Jensen
Marine speakers.
INCREDIBLE Sound
Jensen offers a full line of amplifiers, highpower speakers and subwoofers that can turn
your boat into audio dynamite. You can go
loud, louder and loudest by selecting Jensen
components from your retailer.
Install the MCD 9424JA in a well ventilated
location. Do not install the unit in a closed
box. If the unit is installed without adequate
ventilation, damage could occur due to
overheating.
OPEN
VOL
AS/PS
®
VOL
ST
WB
BAND
SHUFFLESHUFFLE
C
O
SEL/
M
P
A
C
T
DIGITAL AUDIO
W1
1
W2
VERSAM
2
2
CH
PLING
LOUD
• 4 X 25W
W3
3
ATTS
RPT
4
DISP
M
CD-9424JA8 X O
SHF
5
SCN
6
PWR
MCD 9424JA
Wiring
®
Important
If wiring connections are made wrong, the
unit will not operate properly and it could be
damaged. Follow the installation instructions
carefully, or have the installation handled by
an experienced technician.
Professional Tip
Fuse Adapters
No convenient power wire? Install a fuse
adapter having a spade connector.
Fuse
Fuse
Adapter
Crimp on a matching connector and attach:
• Yellow wire–Fuse marked MAIN, BAT
or PWR
• Red wire–Fuse marked ACCY
(accessory), or RADIO
Disconnect Battery
Before you begin, always
disconnect the battery
negative terminal.
–
+
Connect Wires
Splice, crimp or solder the wires from the
receiver to the proper wire in the boat. Match
the wires according to the chart (below).
Wiring Color Codes
Function
LF+ Speaker
LF– Speaker
LR+ Speaker
LR– Speaker
RF+ Speaker
RF– Speaker
RR+ Speaker
RR– Speaker
Remote–Amp turn on
Ground
Ignition
Battery
Dimmer
Color
white
white/black
green
green/black
gray
gray/black
violet
violet/black
dark blue
black
red
yellow
orange
3
®
Wiring Diagram
MCD 9424JA
Antenna
Jack
Note:
If a Dimmer Wire or
Illumination Circuit
cannot be found then
connect the "Dark Blue
Remote Lead" and the
"Orange Dimmer" wire
together.
Remote
Plug
Dark Blue
Orange
Black
RCA-to-RCA cables
(not supplied)
Red (RF)
White (LF)
Red (RR)
White (LR)
Amp
AMP
Connect to the amplifier. If not
used, tape bare end of wire.
Dimmer
Connect to existing dimmer wire.
Ground
Connect to ground terminal.
Amplifier wiring
(See amplifier instructions)
AMP
LF
LR
LF–
white/black
white
LF+
LR–
green/black
green
LR+
Filter
Box
RF–
gray/black
gray
RF+
RR–
violet/black
violet
RR+
In-line
Fuse
(10-amp)
In-line
Fuse
(0.5-amp)
RF
RR
Red
Yellow
Accessory
Connect to existing radio wire or
radio fuse.
+–
Memory
Connect to battery or 12 volt power
source that is always live.
The radio will not work if this
wire is not connected.
Fuses
When replacing a fuse, make sure new
fuse is correct type and amperage. Using
an incorrect fuse could damage radio. The
MCD 9424JA uses two fuses with in-line
fuse holders as part of rear wiring harness:
• 10 amp fast blow AGC (red wire).
• 0.5 amp fast blow AGC (yellow wire).
4
Go to “Testing” on page 5.
MCD 9424JA
W1
1
1
4
2
3
W1
1
®
✓
Before you finish the installation, you should do the following tests to make sure the wiring is correct
and everything is operating properly.
Reconnect Battery
When wiring is complete,
reconnect the battery
negative terminal.
Testing
–
Test Memory W iring
1. With the radio playing,
hold button 1 for five
+
5 Sec
seconds. The radio will
beep. You just stored the
current station in memory.
2. Turn the key off, then turn
the key on again.
T est Power Wiring
1. Turn ignition switch on. The display should
light. If not, check the electrical connection
at the yellow and red wires.
3. Press
will select a different
station.
or . The radio
4. Press button 1 again. It
should return to the station
2. Press PWR to turn the radio on. You will
see the radio display. If not, check electrical connections to the red and yellow
wires.
T est Antenna Connection
1
VOL
2
1. Press or . The
radio should tune to a
nearby station. If not,
check antenna connection.
2. Press
volume until you can
hear the radio playing.
VOL
to increase
Set the Clock
DISP
1
3 Sec
3 Sec
2
0
1
2
3
that was playing before
(step 1). If not, make sure
the yellow wire is connected properly.
1. Press and hold DISP
button for 3 seconds
until display flashes.
2. Within 3 seconds, press
to change minutes,
to change hours.
M H
5
®
MCD 9424JA
T est Speaker Connections
These tests make sure the speakers are connected right. If speakers don’t play at all, both wires
may not be connected. If the wrong speaker plays (you hear front speakers when you expect rear
speakers) make sure you connected the wires right.
Balance
1
VOL
2
3
VOL
4
SEL/
SEL/
1. Press SEL four times.
2. Hold the
button until
VOL
the display shows BAL.R 15.
Only the right speakers should
be playing. If not, check the
wiring. Make sure you connected the wires just like the
chart on page 6.
3. Press SEL four times
again.
VOL
4. Hold the
button until
the display shows BAL.L 15.
Only the left speakers should
be playing. If not, check the
wiring. Make sure you connected the wires just like the
chart on page 6.
5
6
7
8
Fader
SEL/
VOL
SEL/
VOL
5. Press SEL five times.
6. Hold the
VOL
button until
the display shows
FAD.R 15.
Only the rear speakers should
be playing. If not, check the
wiring. Make sure you connected the wires just like the
chart on page 6.
7. Press SEL five times again.
VOL
8. Hold the
button until
the display shows FAD.F 15.
Only the front speakers should
be playing. If not, check the
wiring. Make sure you connected the wires just like the
chart on page 6.
Once everything is operating correctly, perform final installation described on page 7.
6
MCD 9424JA
15° Max.
Final Installation
1. Slide radio chassis into half-sleeve.
2. Install the supplied back strap and secure.
3. Reinstall any items you removed from the dashboard.
4. Install protective faceplate cover.
®
Remove Before
Installation
Apply
adhesive
dot
1
4
OPEN
VOL
AS/PS
®
VOL
STST
WB
BAND
SHUFFLE
8 X OVERSAMPLING • 4 X 25W
COMPACT
D
IG
IT
A
L
A
W1
U
D
IO
1
W2
2
CH
LOUD
W3
3
ATTS
RPT
4
DISP
MCD-9424JA
SHF
5
SCN
6
PWR
SEL/
Note:
Always install a back strap to the head unit. Proper installation
is essential for good performance and reliability.
Protective Cover
The translucent rubber protective cover slips
over the faceplate to provide protection
against water. You can access controls when
the cover is installed. Cover must be removed
to open the flip-over panel and to insert and
eject CDs.
2
Nut
(supplied)
Important
Excessive skipping may result if the unit is
°
installed at an angle of more than 15
.
OPEN
VOL
AS/PS
WB
BAND
VOL
SEL/
8 X OVERSAMPLING • 4 X 25WATTS
®
ST
SHUFFLESHUFFLE
COMPACT
D
IG
IT
A
L
A
W1
U
D
IO
1
W2
2
CH
W3
3
RPT
4
MCD-9424JA
SHF
5
SCN
6
LOUD
DISP
PWR
7
®
Troubleshooting
Problem Cause Corrective Action
MCD 9424JA
Does not operate (display
does not light)
No speakers operate
(display lights normally)
Not all speakers operate
Blows fuses
Can’t find cause of problem
No power to red wire (12V with
key on)
Inline fuse blown
Speaker wires not connected
Incorrect splices or connections
Speaker wires shorting to chassis
ground or to each other
Power wire shorting to ground
Speaker wires shorting to ground
Incorrect fuse
Professional Tip
Securing Wires
Be proud of your installation! Use wire ties to
bundle wires together when possible. (But
never bundle speaker wires and power wires
together!)
Check connection
Check boat fuse
Replace fuse
Connect speaker wires
Check all splices and connections
Check splices, insulate all bare wires
Insulate wire
Insulate wire
Install fuse of correct rating
Call Jensen Technical Assistance
(1-800-323-0221)
Reset Button
In case of abnormal operation:
Use a pencil tip (or other non-metallic object)
to press the RESET button
Secure loose wires to the boat to make sure
they don’t rub or rattle.
8
Reset
Button
Specifications
MCD 9424JA
CD Player
Signal/noise ratio ......................................................................................................................>86 dB
Frequency response .................................................................................................... 20 Hz - 20 kHz
Channel separation...................................................................................................................>65 dB
D/A converter ..........................................................................................................................1 Bit/CH
Weather Radio
Tuning range .................................................................................................NOAA weather chann els
..................................................................................................................162.400, 162.475, 162,550
FM T uner
Tuning range......................................................................................................87.5 MHz-107.9 MHz
FM mono sensitivity ...................................................................................................................12 dBf
50 dB quieting sensitivity (stereo)..............................................................................................16 dBf
Stereo separation @ 1 kHz.........................................................................................................40 dB
AM T uner
Tuning range.......................................................................................................... 530 kHz-1720 kHz
Amplifier
Total system power ......................................................................................................160 watts peak
Power output..................................................................................................................front: 2 x 40W
rear: 2 x 40W
General
Power supply ..........................................................................................11-16 VDC, negative ground
Speaker output impedance.................................................................................................. 4-8 Ohms
Fuses ........................................................................................fast blow AGC (0.5 amp and 10 amp)
Dimensions ........................................................................... 7" x 7" x 2" (178mm x 178mm x 51mm)
Specifications subject to change without notice.
®
Limited One Year Warranty–USA and Canada
Length of Warranty. This warranty from Recoton Mobile
Electronics shall be in effect for a period of one year from the
date of the first consumer purchase.
Persons Protected. This warranty will be enforceable by the
original owner and any subsequent owners during the warranty
period so long as proof of date of purchase from an authorized
Jensen dealer is presented whenever warranty service is
required.
What is Covered. Except as otherwise specified below, this
warranty covers all defects in material and workmanship in this
product. The following are not covered: damage resulting from
accident, misuse, abuse, neglect, product modification,
improper installation, incorrect line voltage, unauthorized repair
or failure to follow instructions supplied with the product;
damage occurring during shipment (claims must be presented
to the carrier); elimination of boat static or other electrical
interferences; any product purchased outside USA or Canada,
or on which the serial numberhas been defaced, modified or
removed.
How You Can Get Service.
U.S. Purchasers. Please telephone Jensen at
1-800-323-4815. We will either inform you of the name and
address of an authorized Jensen repair station which will
service the product or will advise you to send the product to a
factory service center.
Canadian Purchasers. The product should be returned to the
Jensen dealer from whom it was purchased and such dealer
either will service or arrange for service of the product.
If shipment of the product is required, it should be packed
securely. The original dated bill of sale must always be
included with the product as proof of warranty coverage.
What We Will Pay For. We will pay for all labor and material
expenses required to repair the product, but you must pay any
labor costs for the removal and/or installation of the product. If
the product is shipped for warranty service, you must prepay
the initial shipping charges, but Jensen will pay the return
shipping charges if the product is returned to an address inside
the USA or Canada.
Limitation of Implied or Statutory Warranties and Conditions. All implied or statutory warranties and conditions,
including warranties or conditions of merchantability, fitness for
particular purposes and non-infringement, are limited in
duration to the length of this warranty.
Exclusion of Certain Damages. Jensen’s liability is limited to
the repair or replacement, at our option, of any defective
product and shall not include incidental or consequential
economic damages of any kind.
Some states and/or provinces do not allow limitations on how
long an implied warranty lasts and/or do not allow the exclusion
or limitation of incidental or consequential damages, so the
above limitations and exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state and province to
province.
®
Recoton Mobile Electronics
A Division of Recoton Audio Corporation
A RECOTON
®
COMPANY
1090 Emma Oaks Trail
Lake Mary, Florida 32746
©1999 Recoton Audio Corporation
9
Loading...