Jensen MCD9424RC - Radio / CD Player, MCD9424JA Operation Manual

®
Operation
How to Enjoy Your MCD 9424JA Marine AM/FM Stereo Receiver/Compact Disc Player with NOAA Weather Radio Receiver and Flip-Over Security Panel
CH
MCD-9424JA
COMPACT
DIGITAL AUDIO
OPEN
VOL
VOLAS/PS
WB
BAND
SEL/
8 X OVERSAMPLING • 4 X 40 WATTS
®
ST
Welcome!
What you're holding in your hands is no ordinary owner's manual. We've tried to make the instructions in this owner's manual clear and easy to follow . If you take a few minutes to look through it, you'll learn how to use all of the features on your new Jensen marine stereo for maximum enjoyment.
For your Jensen stereo to work right, it must be installed correctly . The enclosed installation manual will show you how to install your new stereo like a pro. It's a good idea to read all of these instructions before you begin the installation. Most installations are straightforward and can be handled by a do-it-yourselfer with the right tools, patience, and the ability to follow instructions. But, do-it-yourself installation isn't for everyone. If you still don't feel confident after reading this book, consider turning the installation job over to someone better suited to it.
Warranty Service
If your Jensen stereo should ever require service, you will need to have the original dated receipt. If you ever need to return the unit for any reason, always include the receipt with the product.
W2
W1
1
W3
3
SHF
5
LOUD
2
RPT
DISP
4
SCN
PWR
6
MCD 9424JA Features
Basic Operation ................2
On/Off .................................. 2
Select Mode......................... 2
V olume................................. 2
Bass.....................................3
Balance................................3
Bass Boost........................... 3
Set the Clock........................3
Optional Remote Control ..... 4
WeatherBand and Radio
Operation.............................5
Select a Weather Band........ 5
Select a Radio Band ............ 5
Select a Radio Station ......... 5
Preset Stations .................... 6
Automatically Store
Stations................................ 6
Preset Scan ......................... 6
CD Player Operation ........7
Insert and Eject CD...............
Skip Tracks ..........................7
Fast Forward and Fast
Reverse................................ 7
Shuffle: Play all tracks.......... 8
Scan (Preview all tracks) ..... 8
Pause CD.............................8
7
Technical Assistance
For technical assistance with the operation of the MCD 9424JA, call 1-800-323-0221.
Optional Remote Control ..... 8
Troubleshooting ................9
Specifications
and Warranty......................9
®
VOL
VOL
Basic Operation
MCD 9424JA
BAND
VOL
VOLAS/PS
SEL/
ST
8 X OVERSAMPLING • 4 X 40 WATTS
OPEN
WB
On/Off
PWR
Press PWR button to turn the MCD 9424JA on. Press PWR again to turn it off.
Select Mode
Press SEL button to move display through volume, treble, bass, balance and fader functions. Use adjust the selected mode. When mode has not been adjusted for 3 seconds, display returns to normal radio or CD display.
VOL
and
VOL
buttons to
®
VOL
COMPACT
DIGITAL AUDIO
CH
MCD-9424JA
Volume
SHF
W2
RPT
SCN
LOUD
2
DISP
4
PWR
6
W1
1
W3
3
5
Adjust volume by pressing
VOL
or
VOL
.
Treble
1
SEL/
1. Press SEL button two times.
(Fader)
2
SEL/
(Balance)
SEL/
(Volume)
VOL
SEL/
SEL/
(Bass)
SEL/
(Treble)
2. Adjust Treble level
VOL
VOL
or
VOL
using
2
VOL
button.
+7 = maximum –7 = minimum
MCD 9424JA
®
Bass
1
SEL/
VOL
2
VOL
Balance
1. Press SEL button three times.
2. Adjust Bass level
VOL
using
VOL
or
button.
+7 = maximum –7 = minimum
1
2
Fader
SEL/
VOL
VOL
1. Press SEL button five times.
2. Adjust sound balance front and rear using
VOL
F15 = Front speakers only R15= Rear speakers only
button.
VOL
or
1
2
SEL/
VOL
1. Press SEL button four times.
2. Adjust sound balance left and right using
VOL
button.
VOL
or
Bass Boost
LOUD
Press LOUD button to increase the bass output. LOUD appears in the display.
Set the Clock
VOL
DISP
R15 = Right speaker only L15 = Left speaker only
1
2
3 Sec
3 Sec
0
1
2
3
1. Press and hold DISP button for 3 seconds until display flashes.
2. Within 3 seconds, press
to change minutes, to change hours.
M H
3
®
Optional Remote Control
MCD 9424JA
The MCD 9424JA can be controlled through an optional wired remote control, MWR-20. The remote control allows access to the most common functions on the MCD 9424JA such as Volume, Tune/Track selection, Power on/off, AM/FM bands, Weather Band and Play/Pause for CD Mode.
The MWR-20 looks like a standard dash gauge and is designed to be installed in the dash panel of your vessel.
The remote requires a standard 2 1/8" gauge hole cutout.
4
MCD 9424JA
W eather Band and Radio
Operation
®
BAND
VOL
VOLAS/PS
SEL/
ST
8 X OVERSAMPLING • 4 X 40 WATTS
OPEN
WB
Select a Weather Band
The MCD 9424JA has a three channel NOAA Weather Radio receiver . NOAA Weather Radio broadcasts National Weather Service warnings, watches, forecasts and other hazard information 24 hours a day. The channel freqencies are as follows: W1=162.55, W2=162.4, W3=162.475.
WB
1
W1
2
1. Press WB to change radio to weather radio receiver.
1
®
COMPACT
DIGITAL AUDIO
CH
MCD-9424JA
W1
W3
SHF
W2
LOUD
2
1
RPT
DISP
4
3
SCN
PWR
6
5
Select a Radio Band
BAND
Press BAND button to change radio between three FM bands and two AM bands. Each band stores up to six preset stations.
Select a Radio Station
Options for selecting a station
W2
2
W3
3
2. Press W1, W2 and W3 to change between three weather channels in your area.
<1 Sec
>1 Sec
Touch
a or for less than one
second to move radio frequency number up or down one step.
Press
or for more than one
second to move quickly through the radio frequency numbers. The numbers change until button is released.
5
®
MCD 9424JA
Preset Stations
1
3
5
BAND
W3
ST
BAND
W2
2
Six numbered preset buttons store and recall stations for
4
6
each band.
RPT
SCN
1. Select a band (if needed).
2. Select a station.
3
3.
Press
three seconds. The re-
3 Sec
ceiver beeps when station is saved.
1. Select band (if needed).
W1
W3
SHF
Store a station:
1
2
3
Band
Recall a station:
1
a preset button for
CH
Preset Station Number
Automatically Store Stations
Select six strong stations and store them in current band
1
BAND
2
AS/PS
1. Select a band (if needed).
Press
2.
AS/PS button for
more
than three seconds (receiver beeps). The new stations replace stations already stored in that band.
>3 Sec
Preset Scan
Scan stations stored in current band
1
2
<3 Sec
BAND
AS/PS
1. Select a band (if needed).
Touch
2.
AS/PS for
less
than three seconds. The radio pauses for five seconds at each station.
Touch
AS/PS
again to stop scanning when desired station is reached.
2. Press a preset button to select stored station.
2
W3
6
CH
3
Loading...
+ 12 hidden pages