Jenn-Air JXT9048CDP, JXT9036CDP, JXT9030CDP Owner’s Manual

RANGE HOOD

Model Number:
Manufacturer Number:

Size:

JX[9030CDP

MK7030

30"

GUIDE

JXT9036CDP [×T9048CDP
MK7036 MK7048

36" 48"

TABLE OF CONTENTS

Satet', Instructions .................................................... 1

Controls & Features ................................................. 2

Maintenance ......................................................... 3-4

Warranty ................................................................... 5

MK7030
MK7036
MK7048

Form No. A/06/04 Part No. 8_ 10P261-60 ,¢ 2004 Maytag Appliances Sales (o. litho U.S.A.

IVIODEL$:JXT9030 JXT9036 JXT9048

lostallation

Theinstallationin thismanualis intendedforqualifiedinstallers,servicetechniciansor persons

withsimilarqualifiedbackground.DONOTattempttoinstallthisapplianceyourself.Iniurycould
resultfrominstallingthe unitduetolackofappropriateelectricalandtechnicalbackground.

All electrical wiring must be properly installed, insulated and grounded. Overly accumulated

greasein old duct work should becleaned out or duct work should be replaced if necessary to
avoid the possibility of a grease fire. Check all ioints on duct work to insure properconnection
andall ioints should be properly taped.

Operations
Readall instructions in this manual before operating the appliance. Save these instructions for

future reference.

Always leave safety grills and filters in place.Without these components, operating blowers

could catch on to hair;fingers and looseclothing.
NEVERdispose cigarette ashes, ignitable substances, or any foreign obiects into blowers.

NEVERleavecooking unattended.When frying, oil in the pan can easily overheat and catch fire.

The risk of self combustion is higher when the oil has been used severaltimes.

Cleaning

The saturation of greasy residue in the blower and filters may cause increased flammability.

Keepunit clean and free of grease and residue build-up at all times to prevent possiblefires.
Filters must be cleaned periodically and kept free from accumulation of cooking residue (see

cleaning instructions inside).Oldand worn filters must bereplaced immediately. Donot operate
blowers when filters are removed. Neverdisassemble parts to clean without properinstructions.

Disassemblyisrecommended to be performed by qualified personnelonly. Call ourservice cen-
ter for removal instructions. 1-800-JENNAIR(USAand Canada),(1-800-536-6247)

The manufacturer declines all responsibility in the event of failure to observe the instruc z

tions given here for installation, maintenance and suitable use of the product. The manufacz
turer further declines all responsibility for injury due to negligence and the warranty of the

unit automatically expires due to improper maintenance.

* Please check tot latest specification revisions before any custom work or cutouts.