Jenn-Air JJW9330DDW, JJW8330DDS, JJW8330DDB, JJW9330DDS, JJW8330DDW Installation Instructions Manual

0 (0)

INSTALLATIONINSTRUCTIONS

27" (68.6 CM) AND 30" (76.2 CM) ELECTRICSINGLE

AND DOUBLEBUILT-INOVEN

INSTRUCTIONSD'INSTALLATION

e= e=

FOUR ELECTRIQUEENCASTREDE27" (68,6 CM) ET

30" (76,2 CM) - SIMPLEETDOUBLE

Table of Contents/Table des mati_res

IBUILT-IN OVEN SAFETY ........................................................................... 1

NSTALLATION REQUIREMENTS .............................................................. 2

Tools and Parts ......................................................................................... 2

Location Requirements ............................................................................. 2

Electrical Requirements ............................................................................ 4

INSTALLATION INSTRUCTIONS ............................................................... 5

Prepare Built-In Oven ............................................................................... 5

Make Electrical Connection ...................................................................... 6

Install Oven ............................................................................................... 7

Complete Installation ................................................................................ 8

SI_CURITI_ DU FOUR ENCASTRI_ ............................................................. 9

EXIGENCES D'INSTALLATION .................................................................. 9

Outillage et composants ........................................................................... 9

Exigences d 'emplacement ....................................................................... 9

Specifications electriques ....................................................................... 12

INSTRUCTIONS D'INSTALLATION ......................................................... 13

Preparation du four encastre .................................................................. 13

Raccordement electrique ....................................................................... 14

Installation du four .................................................................................. 15

Achever I'installation ............................................................................... 16

BUILT-INOVEN SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

iMPORTANT:

Save for local electrical inspector's use.

iMPORTANT :

A,conserver pour consultation par I'inspecteur local des installations 61ectriques.

W10176681A

INSTALLATIONREQUIREMENTS

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed

here.

Tools needed

• Phillips screwdriver

• Measuring tape

• Hand or electric drill (for wall cabinet installations)

• 11¼"(25 mm) drill bit (for wall cabinet installations)

• Level

Parts needed

• UL listed or CSA approved conduit connector

• UL listed wire connectors

Parts supplied

• # 8-14 x 3A,,screws - single oven (4), double oven (8)

• Bottom trim (supplied on some models)

• Two # 8-18 x 3/8"screws - bottom trim (supplied on some models)

Check local codes. Check existing electrical supply. See "Electrical Requirements."

It is recommended that all electrical connections be made by a licensed, qualified electrical installer.

Product Dimensions - Single Oven

27" (68.6 cm) and 30" (76.2 cm) Ovens

_CJ

27" (68.6 cm) models

A. 25%" (64.5 cm) max. recessed

width

B.28¼" (71.8 cm) max. overall

height C. 263/4'' (67.9 cm) overall width D. 23Y2" (59.7 cm) max. recessed

depth

E.271/2'' (69.9 cm) recessed

height

30" (76.2 cm) models

A. 28¼" (71.8 cm) max. recessed

width

B. 28¼" (71.8 cm) max. overall

height

C. 293/4''(75.6 cm) overall width

D. 23Y2" (59. 7 cm) max. recessed

depth

E. 271/2''(69.9 cm) recessed

height

IMPORTANT: Observe all governing codes and ordinances.

• Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance with oven.

• Recessed installation area must provide complete enclosure around the recessed portion of the oven.

• Grounded electrical supply is required. See "Electrical Requirements" section.

Electrical supply junction box should be located 3" (7.6 cm) maximum below the support surface when the oven is installed in a wall cabinet. A 1W' (3.4 cm) minimum diameter

hole should have been drilled in the right rear or left rear corner of the support surface to pass the appliance cable through to the junction box.

NOTE: For undercounter installation, it is recommended that the junction box be located in the adjacent right or left

cabinet. If you are installing the junction box on rear wall behind oven, the junction box must be recessed and located in the upper or lower right or left corner of the cabinet; otherwise, the oven will not fit into the cabinet opening.

Oven support surface must be solid, level and flush with bottom of cabinet cutout. Floor must be able to support a single oven weight of 142 Ibs (64.4 kg) or a double oven weight of 250 Ibs (113.2 kg).

Undercounter Installation (with cooktop installed above):

Ovens approved for this type of installation have an approval label located on the top of the oven. Refer to undercounter installation instructions for cutout dimensions and approved oven cooktop

combinations (separate sheet).

Cabinet Dimensions - Single Oven

27" (68.6 cm) and 30" (76.2 cm) Single Oven Undercounter (without cooktop installed above)

.,_ A B

A. 27" (68.6 cm) min. cabinet width on 27" (68.6 cm) models

30" (76.2 cm) min. cabinet width on 30" (76.2 cm) models

B. 11/2''(3.8 cm) min. top of cutout to underside of countertop C. 5%" (13.0 cm) bottom of cutout to floor

D. 281/2'' (72.4 cm) cutout width on 30" (76.2 cm) models

E. 277/8'' (70.8 cm) min. cutout height

30" (76.2 cm) Single Oven Undercounter (with cooktop installed above)

_D C

A. 30" (76.2 cm) min. cabinet width B. Electric cooktop 1_" (4.1 cm); Gas cooktop 3 _" (8.6 cm) min.

top of cutout to underside of countertop

C. Electric cooktop 5" (12.7 cm); Gas cooktop 3¼" (8.3 cm)

bottom of cutout to floor

D. 281/2" (72.4 cm) cutout width

E.277/8'' (70.8 cm) min. cutout height

Single Oven Installed in Cabinet

Product Dimensions - Double Oven

27" (68.6 cm) and 30" (76.2 cm) Ovens

27" (68.6 cm) models

A. 27" (68.6 cm) min. cabinet

width

B. 1" (2.5 cm) top of cutout to

bottom of upper cabinet door

C. 4" to 33" (10.2 to 83.8 cm)

bottom of cutout to floor

D. 251/2" (64.8 cm) cutout width

E. 11/2'' (3.8 cm) min. bottom of

cutout to top of cabinet door

F. 277/8''(70.8 cm) min. cutout

height

_D_

30" (76.2 cm) models

A. 30" (76.2 cm) min. cabinet

width

B. 1" (2.5 cm) top of cutout to

bottom of upper cabinet door

C. 4" to 33" (10.2 to 83.8 cm)

bottom of cutout to floor

D. 281/2" (72.4 cm) cutout width E. 11/2'' (3.8 cm) min. bottom of

cutout to top of cabinet door

F. 277/8''(70.8 cm) min. cutout

height

27" (68.6 cm) models

A. 253/8''(64.5 cm) max. recessed

width

B. 50¼" (127.6 cm) max. overafl

height C. 263/4'' (67.9 cm) overall width D. 23V2" (59. 7 cm) max. recessed

depth

E.495/8'' (126.1 cm) recessed

height

30" (76.2 cm) models

A. 283/8"(72.1 cm) max. recessed

width

B. 50¼" (127.6 cm) max. overall

height C. 293/4''(75.6 cm) overall width D. 237/2" (59.7 cm) max. recessed

depth E. 495/8''(126.1 cm) recessed

height

Cabinet Dimensions - Double Oven

Double Oven Installed in Cabinet

_A_

27" (68.6 cm) models

A. 27" (68.6 cm) min. cabinet

width

B. 1" (2.5 cm) top of cutout to

bottom of upper cabinet door

C. 4" to 12" (10.2 to 30.5 cm)

bottom of cutout to floor

D. 251/2'' (64.8 cm) cutout width E. 11/2'' (3.8 cm) min. bottom of

cutout to top of cabinet door

F. 50.0" (127.0 cm) min. cutout

height

30" (76.2 cm) models

A. 30" (76.2 cm) min. cabinet

width

B. 1" (2.5 cm) top of cutout to

bottom of upper cabinet door

C. 4" to 12" (10.2 to 30.5 cm)

bottom of cutout to floor

D. 281/2" (72.4 cm) cutout width

E. 11/2''(3.8 cm) min. bottom of

cutout to top of cabinet door

F. 50.0" (127.0 cm) min. cutout

height

If codes permit and a separate ground wire is used, it is recommended that a qualified electrical installer determine that the ground path and the wire gauge are in accordance with local codes.

Check with a qualified electrical installer if you are not sure the oven is properly grounded.

This oven must be connected to a grounded metal, permanent wiring system.

Be sure that the electrical connection and wire size are adequate and in conformance with the National Electrical Code, ANSI/NFPA 70-latest edition or CSA Standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No. O-M91-1atest edition, and all local codes and ordinances.

A copy of the above code standards can be obtained from:

National Fire Protection Association

One Batterymarch Park

Quincy, MA 02269

CSA International

8501 East Pleasant Valley Road

Cleveland, OH 44131-5575

Electrical Connection

To properly install your oven, you must determine the type of electrical connection you will be using and follow the instructions provided for it here.

• Oven must be connected to the proper electrical voltage and frequency as specified on the model/serial number rating

plate. The model/serial number rating plate is located at the bottom of the left-hand mounting rail. See the following

illustration.

Cabinet Side View - Double or Single Oven

A. 24" (61.0 cm) min. cutout depth B. 23V2" (59.7 cm) recessed oven depth

C. Oven front D. Recessed oven

E. Cabinet

Single Oven

A. Model/serial number plate

Double Oven

A. Model/serial number plate

KW Rating on Recommended Wire Size

Serial/rating Plate Minimum Circuit (AWG)

Protection in Amps

0.0 - 4.8 20 12

7.0 - 9.9 40 8

A circuit breaker is recommended. Connect directly to the circuit breaker box (or fused

disconnect) through flexible, armored or nonmetallic sheathed, copper cable (with grounding wire). See "Make

Electrical Connection" section.

Flexibleconduitfromtheovenshouldbeconnecteddirectlyto thejunctionbox.

Donotcuttheconduit.Thelengthofconduitprovidedisfor serviceabilityoftheoven.

AULlistedorCSAapprovedconduitconnectormustbe provided.

• Ifthehousehasaluminumwiringfollowtheprocedurebelow:

INSTALLATIONINSTRUCTIONS

1. Connectasectionofsolidcopperwiretothepigtail

leads.

2. Connectthealuminumwiringtotheaddedsectionof

copperwireusingspecialconnectorsand/ortools designedandULlistedforjoiningcoppertoaluminum.

Followtheelectricalconnectormanufacturer'srecommended procedure.Aluminum/copperconnectionmustconformwith localcodesandindustryacceptedwiringpractices.

Decide on the final location for the oven. Locate existing wiring to avoid drilling into or severing wiring during

installation.

Excessive Weight Hazard

Use two or more people to move and install oven. Failure to do so can result in back or other injury.

2. To avoid floor damage, set the oven onto cardboard prior to installation. Do not use handle or any portion of the front

frame or trim for lifting.

3. Remove the shipping materials and tape from the oven.

4. Remove the hardware package from inside the bag containing literature.

Remove and set aside racks and other parts from inside the oven.

Move oven and cardboard close to the oven's final location.

7. Open the oven door.

Remove Oven Door.

IMPORTANT: Use both hands to remove oven doors.

1. Open oven door to the full open position.

2. Locate the oven door latches in both corners of the oven door.

3. Using a Phillips screwdriver, remove the screw and door hinge cover plate above each door latch slot in the oven frame.

A. Hinge cover plate screw

B. Hinge cover plate

C. Hinge

Grasp the edges of the oven door with both hands and close the oven door halfway. Lift and pull oven door toward you and

remove. Set the oven door aside on a covered surface.

+ 11 hidden pages