JENN AIR JGS1450DS Installation Manual

THANK YOU for purchasing this high-quality product. Register your range at www.jennair.com. In Canada, register your range at

User Guide

Gas Range

www.jennair.ca. For future reference, please make a note of your product model and serial numbers. These can be found on the label located on the

oven frame behind the top right side of the oven door.

Model Number _______________________________________ Serial Number ________________________________________

Para una versión de estas instrucciones en español, visite www.jennair.com. Deberá tener a mano el número de modelo y de serie, que están ubicados en el marco del horno, detrás del lado derecho superior de

la puerta del horno.

Table of Contents

RANGE SAFETY ............................................................................2

The Anti-Tip Bracket ...................................................................3

KEY USAGE TIPS..........................................................................4

AquaLift® Self-Cleaning Technology...........................................4

Surface Temperatures ................................................................4

Preheating ...................................................................................4

Surface Burners ..........................................................................4

FEATURE GUIDE...........................................................................5

Electronic Oven Controls............................................................7

COOKTOP......................................................................................9

Surface Burners ..........................................................................9

Surface Grates ..........................................................................10

Burner Size................................................................................10

Griddle.......................................................................................11

Cookware..................................................................................11

Home Canning ..........................................................................12

OVEN ............................................................................................13

Aluminum Foil............................................................................13

Positioning Racks and Bakeware.............................................13

Roll-Out Rack............................................................................14

Oven Vent..................................................................................15

Sabbath Mode ..........................................................................15

Baking and Roasting.................................................................15

Broiling ......................................................................................15

Convection Cooking .................................................................16

Proofing Bread ..........................................................................16

Favorite......................................................................................16

Cook Time.................................................................................17

Baking Drawer...........................................................................17

Oven Light.................................................................................17

RANGE CARE ..............................................................................18

Clean Cycle ...............................................................................18

General Cleaning.......................................................................19

Remove/Replace Drawer..........................................................20

PROBLEM SOLVER ....................................................................21

ACCESSORIES............................................................................24

WARRANTY .................................................................................25

W10665265B

Range Safety

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death.

– Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this

or any other appliance.

– WHAT TO DO IF YOU SMELL GAS:

•

Do not try to light any appliance.

•

Do not touch any electrical switch.

•

Do not use any phone in your building.

•

Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.

•

If you cannot reach your gas supplier, call the fire department.

– Installation and service must be performed by a qualified installer, service agency or

the gas supplier.

WARNING: Gas leaks cannot always be detected by smell. Gas suppliers recommend that you use a gas detector approved by UL or CSA. For more information, contact your gas supplier. If a gas leak is detected, follow the “What to do if you smell gas” instructions.

State of California Proposition 65 Warnings: WARNING: This product contains one or more chemicals known to the State of California to cause cancer. WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other

reproductive harm.

The Anti-Tip Bracket

Tip Over Hazard A child or adult can tip the range and be killed. Verify the anti-tip bracket has been properly installed and engaged per installation instructions. Re-engage anti-tip bracket if range is moved. Do not operate range without anti-tip bracket installed and engaged. Failure to follow these instructions can result in death or serious burns to children and adults.

To verify the anti-tip bracket is installed and engaged:

• Slide range forward.

• Look for the anti-tip bracket securely attached to floor or wall.

• Slide range back so rear range foot is under anti-tip bracket.

• See installation instructions for details.

WARNING

Anti-Tip Bracket

Range Foot

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

To reduce the risk of fire, electrical shock, injury to persons, or damage when using the range, follow basic precautions, including the following:

■

WARNING:

TO REDUCE THE RISK OF TIPPING OF THE RANGE, THE RANGE MUST BE SECURED BY PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET SECURELY ATTACHED TO FLOOR OR WALL, AND SLIDE RANGE BACK SO REAR RANGE FOOT IS UNDER ANTI-TIP BRACKET.

■

WARNING:

NEVER use this appliance as a space heater to heat or warm the room. Doing so may result in carbon monoxide poisoning and overheating of the oven.

■

WARNING:

NEVER cover any slots, holes or passages in the oven bottom or cover an entire rack with materials such as aluminum foil. Doing so blocks air flow through the oven and may cause carbon monoxide poisoning. Aluminum foil linings may also trap heat, causing a fire hazard.

■

CAUTION:

Do not store items of interest to children in cabinets above a range or on the backguard of a range – children climbing on the range to reach items could be seriously injured.

■ Proper Installation – The range, when installed, must be

electrically grounded in accordance with local codes or, in the absence of local codes, with the

National Electrical

Code, ANSI/NFPA 70

. In Canada, the range must be electrically grounded in accordance with Canadian Electrical Code. Be sure the range is properly installed and grounded by a qualified technician.

■ This range is equipped with a three-prong grounding plug

for your protection against shock hazard and should be plugged directly into a properly grounded receptacle. Do not cut or remove the grounding prong from this plug.

■ Disconnect power before servicing.

■ Injuries may result from the misuse of appliance doors or

drawers such as stepping, leaning, or sitting on the doors or drawers.

■ Maintenance – Keep range area clear and free from

combustible materials, gasoline, and other flammable vapors and liquids.

■ Storage in or on the Range – Flammable materials should

not be stored in an oven or near surface units.

■ Top burner flame size should be adjusted so it does not

extend beyond the edge of the cooking utensil.

For self-cleaning ranges –

■ Before Self-Cleaning the Oven – Remove broiler pan and

other utensils. Wipe off all excessive spillage before initiating the cleaning cycle.

The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without the anti-tip bracket fastened down properly.

AquaLift® Self-Cleaning Technology

Key Usage Tips

AquaLift® Self-Cleaning Technology is a first-of-its-kind cleaning solution designed to minimize the time, temperature and odors that ordinarily come with traditional self-cleaning methods. With AquaLift interior of the oven is activated with heat and water to release baked-on soil. To use AquaLift® Self-Cleaning Technology, simply wipe out loose debris, pour water into the oven bottom and run the AquaLift® Self-Cleaning cycle. When the cycle finishes in under 1 methods, just wipe out the remaining water and loose debris. See the “Clean Cycle” section for more detailed instructions. For additional information, frequently asked questions and videos on using AquaLift http://whirlpoolcorp.com/aqualift.

Self-Cleaning Technology, an innovative coating on the

hour at a lower temperature than in traditional self-cleaning

Self-Cleaning Technology, visit our website at

Surface Temperatures

When the range is in use, all range surfaces may become hot, such as the knobs and oven door.

Baking Drawer

When the oven is in use, the drawer may become hot. Do not store plastics, cloth, or other items that could melt or burn in the drawer.

Oven Vent

The oven vent releases hot air and moisture from the oven, and should not be blocked or covered. Do not set plastics, paper or other items that could melt or burn near the oven vent.

Preheating

When beginning a Bake, Convect Bake or Convect Roast cycle, the oven will begin preheating after Start is pressed. approximately 12 to 15 minutes to reach the oven racks provided with your oven inside the oven cavity. Higher temperatures will take longer to preheat. The preheat cycle rapidly increases the oven temperature. The actual oven temperature will go above your set temperature to offset the heat lost when your oven door is opened to insert food. This ensures that when you place your food in the oven, the oven will begin at the proper temperature. Insert your food when the preheat tone sounds. Do not open the door during preheat before the tone sounds.

The oven will take

350°F (177°C)

with all of

Surface Burners

A. Small B. X-Large

Align the gas tube opening in the burner base with the orifice holder on the cooktop and the igniter electrode with the notch in the burner base.

A. Burner cap B. Gas tube opening C. Burner base

Place the burner caps on the appropriate burner bases.

Small cap Medium cap Large cap X-Large cap

Burner caps should be level when properly positioned. If burner caps are not properly positioned, surface burners will not light. The burner cap should not rock or wobble when properly aligned.

C. Oval D. Medium

E. Large

D. Igniter electrode

E. Orifice holder

The burner bases and caps must be properly positioned before cooking. Your range comes with five sizes of burners and caps. Align the burner bases as shown in the following illustration:

A. Incorrect B. Correct

This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or the Frequently Asked

Feature Guide

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before or after cooking.

Doing so can result in food poisoning or sickness.

Questions (FAQs) section of our website at www.jennair.com for more detailed instructions. In Canada, refer to the Customer Service Section at www.jennair.ca.

KEYPAD FEATURE INSTRUCTIONS

OPTIONS/CLOCK Clock The Clock can use a 12- or 24-hour cycle. See the “Electronic Oven Control” section.

1. Press OPTIONS/CLOCK until “CLOCK” is displayed.

2. Press START to change the time.

3. Press “3” for AM or “6” for PM.

4. Use the number keypad to set the time of day.

5. Press START or CANCEL UPPER to exit.

OPTIONS/CLOCK Settings Enables you to personalize the audible tones and oven operation to suit your needs. See the

“Electronic Oven Control” section.

LIGHT Oven cavity light The oven light is controlled by a keypad on the oven control panel. While the oven door is

closed, press LIGHT to turn the light on and off. When the oven door is opened, the oven light will automatically come on.

TIMER SET/OFF

Oven timer The Timer can be set in hours or minutes up to 9 hours and 59 minutes.

1. Press TIMER SET/OFF.

2. Press the number keypads to set the length of time in hr-min-min. Leading zeros do not

have to be entered. For example, for 2 minutes, enter “2.”

3. Press TIMER SET/OFF to begin the countdown. If enabled, end-of-cycle tones will

sound at end of countdown.

4. Press TIMER SET/OFF again to cancel the Timer and return to the time of day. Do not

press the Cancel keypad because the oven will turn off.

5. If the Timer is running, but not in the display, press TIMER SET/OFF to display the

countdown for 5

seconds.

START Cooking start The Start keypad begins any oven function. If Start is not pressed within 2 minutes after

CANCEL UPPER CANCEL LOWER

BAKE (upper and lower oven)

Range function The Cancel keypads stop any function for the appropriate oven, except the Clock and Timer.

Baking and roasting

pressing a keypad, the function is canceled and the time of day is displayed.

1. Press BAKE for the desired oven.

2. Set the desired temperature between 170°F and 500°F (75°C and 260°C) for the upper

oven, or 170°F and 451°F (75°C and 233°C) for the lower oven, using the number keypads. The default temperature is 350°F (180°C).

3. Press START.

4. To change the temperature, repeat steps 2 and 3.

5. Press CANCEL for the desired oven when finished.

KEYPAD FEATURE INSTRUCTIONS

BROIL Broiling 1. Press BROIL.

2. Press the number keypads to set the desired temperature.

3. Press START and allow the oven to preheat for 5 minutes.

4. To change the temperature, repeat steps 2 and 3.

5. Position the cookware in the oven and close the door.

6. Press CANCEL UPPER when finished.

MANUAL CONVECT MODES

AUTO CONVECT MODES

KEEP WARM (upper and lower oven)

PROOF Proofing bread 1. Place prepared dough in oven. Press PROOF.

FAVOR ITE Saved favorite The Favorite keypad stores the oven mode, cook time, and temperature for your favorite

DELAY START Delayed start The Delay Start keypad is used to enter the starting time for an oven function with a delayed

COOK TIME Timed cooking Timed cooking allows the oven to be set to turn on at a certain time of day, cook for a set

AQUALIFT SELF CLEAN

START (hold 3 sec to lock)

Convection cooking

Hold warm Food must be at serving temperature before placing it in the warmed oven.

Clean cycle See the “Clean Cycle” section.

Oven control lockout

1. Press MANUAL CONVECT MODES until the desired convection mode appears in the

display.

2. Press START.

3. Press the number keypads to set the desired temperature.

4. Press START.

5. Insert food when prompted.

6. To change the temperature, repeat steps 3 and 4.

7. Press CANCEL UPPER when finished.

1. Press AUTO CONVECT MODES until the desired convection mode appears in the

display.

2. Press START.

3. Press the number keypads to set the desired temperature.

4. Press START.

5. Press the number keypads to set the desired cook time.

6. Press START.

7. Insert food when prompted.

8. To change the temperature, repeat steps 3 through 6.

9. Press CANCEL UPPER when finished.

1. Press KEEP WARM for the desired oven.

2. Set the desired temperature between 145°F and 190°F (63°C and 88°C) using the

number keypads. The default temperature is 170°F (75°C).

3. Press START.

4. Press CANCEL for the desired oven when finished.

2. Press START.

Let the dough rise until nearly doubled in size. Proofing time may vary depending on dough type and quantity.

3. Press CANCEL UPPER when finished proofing. Refer to the “Proofing Bread” section for more information.

recipe. To save or use favorite, see the “Favorite” section.

start. Delay Start should not be used for foods such as breads and cakes because they may not bake properly.

To set a Timed Cook or a Delayed Timed Cook, see “Cook Time” section.

length of time, and/or shut off automatically. To set a Timed Cook or a Delayed Timed Cook, see “Cook Time” section.

1. Check that the oven is off.

2. Press and hold START (hold 3 sec to lock) for 3 seconds.

3. A tone will sound, and “Control Locked” will scroll, and then “Locked” will be displayed.

4. Repeat to unlock. No keypads will function with the controls locked. The cooktop

functions are not affected by the oven control lockout.

KEYPAD FEATURE INSTRUCTIONS

OPTIONS/CLOCK Energy save 1. Press and hold OPTIONS/CLOCK for 3 seconds to change status. The display will scroll

“Energy saver on.” or “Energy saver off.” If Energy Save is on, the range will go into sleep mode after 5 minutes of inactivity. Any

keypad press will activate the display. If Energy Save is off, the display will be on at all times.

Electronic Oven Controls

Control Display

The display will flash when powered up or after a power loss. Press CANCEL UPPER to clear. When the oven is not in use, the time of day is displayed. If the range is in Energy Save mode, the display will be blank when not in use.

Tones

Tones are audible signals, indicating the following:

One Tone

■ Valid keypad press

■ Oven is preheated (long tone)

■ Function has been entered

■ Reminder, repeating each minute after the end-of-cycle tones

Three Tones

■ Invalid keypad press

Four Tones

■ End of cycle

Use the Options/Clock keypad to change the tone settings.

Energy Save

The Energy Save mode puts the range into sleep mode and reduces energy consumption.

To Activate the Energy Save Mode:

1. Press and hold OPTIONS/CLOCK for 3 seconds. “Energy

saver on.” will appear in the display.

2. The setting will be activated after 5 minutes. To Deactivate the Energy Save Mode:

1. Press and hold OPTIONS/CLOCK for 3 seconds. “Energy

saver off.” will appear in the display.

2. The clock will reappear in the display, and the range can be

operated as usual.

Settings

Many features of the oven control can be adjusted to meet your personal needs. These changes are made using the keypad.

Use the Options/Clock keypad to scroll through the features that can be changed. Each press of the Options/Clock keypad will advance the display to the next setting. After selecting the feature to be changed, the control will prompt you for the required input. Then press START or CANCEL UPPER to exit and display the time of day. Details of all of the feature changes are explained in the following sections.

Press CANCEL UPPER to exit Settings.

Options/Clock

Clock

The Clock can use a 12- or 24-hour cycle.

1. Press OPTIONS/CLOCK until “CLOCK” is displayed.

2. Press START to change the time.

3. Press “3” for AM or “6” for PM.

4. Use the number keypads to set the time of day.

5. Press START or CANCEL UPPER to exit and display the time

of day.

Fahrenheit and Celsius

The temperature is preset to Fahrenheit, but can be changed to Celsius.

1. Press OPTIONS/CLOCK until “TEMP UNIT” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Audible Tones Disable

Turns off all tones, including the end of cycle tone and key press tones. Reminder tones are still active when all tones are disabled.

1. Press OPTIONS/CLOCK until “SOUND” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Sound Volume

Sets the volume of the tone to either high or low.

1. Press OPTIONS/CLOCK until “SOUND VOLUME” is

displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

End of Cycle Tone

Activates or turns off the tones that sound at the end of a cycle.

1. Press OPTIONS/CLOCK until “END TONE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Key Press Tones

Activates or turns off the tones when a keypad is pressed.

1. Press OPTIONS/CLOCK until “KEYPRESS TONE” is

displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Reminder Tones Disable

Turns off the short repeating tone that sounds every 1 minute after the end of cycle tones.

1. Press OPTIONS/CLOCK until “REMINDER TONE” is

displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

12/24 Hour Clock

1. Press OPTIONS/CLOCK until “12/24 HOUR” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Demo Mode

IMPORTANT: This feature is intended for use on the sales floor

with 120 V power connection and permits the control features to be demonstrated without the oven turning on. If this feature is activated, the oven will not work.

1. Press OPTIONS/CLOCK until “DEMO MODE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Sabbath Mode

The Sabbath Mode sets the oven to remain on in a bake setting until turned off.

When the Sabbath Mode is set, only the Bake cycle will operate. All other cooking and cleaning cycles are disabled. No tones will sound, and the displays will not indicate temperature changes.

When the oven door is opened or closed, the oven light will not turn on or off, and the heating elements will not turn on or off immediately.

To Enable Sabbath Mode Capability (One Time Only):

1. Press OPTIONS/CLOCK until “SABBATH” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

12-Hour Shutoff

The oven control is set to automatically shut off the oven 12 hours after the oven initiates a cook or clean function. This will not interfere with any timed or delay cook functions.

1. Press OPTIONS/CLOCK until “12Hr AUTO_OFF” is

displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Languages - Scrolling Display Text

Language options are English, Spanish and French.

1. Press OPTIONS/CLOCK until “LANGUAGE” is displayed.

2. The current setting will be displayed.

3. Press the “1” or “2” keypad to select the desired language.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Oven Temperature Offset Control

IMPORTANT: Do not use a thermometer to measure oven temperature. Elements will cycle on and off as needed to provide consistent temperature but may run slightly hot or cool at any point in time due to this cycling. Most thermometers are slow to react to temperature change and will not provide an accurate reading due to this cycling.

The oven provides accurate temperatures; however, it may cook faster or slower than your previous oven, so the temperature can be adjusted to personalize it for your cooking needs. It can be changed to Fahrenheit or Celsius.

To Adjust Oven Temperature:

1. Press OPTIONS/CLOCK until “TEMP CALIB” is displayed.

2. On some models, press “1” to adjust the drawer temperature

calibration. Press START, wait 10 change, and then continue with Step

OR Press START to adjust the oven temperature calibration. Wait

seconds for the display to change, and then continue with

10 Step

3. Press the “3” keypad to increase the temperature in 5°F (3°C)

increments, or press the “6” keypad to decrease the temperature in 5°F (3°C) increments. The offset range is from

-30°F to +30°F (-18°C to +18°C).

4. Press START or CANCEL UPPER to exit and display the time

of day.

seconds for the display to

Alignment: Be sure to align the gas tube opening in the burner

Cooktop

WARNING

Fire Hazard

Do not let the burner flame extend beyond the edge of the pan.

Turn off all controls when not cooking. Failure to follow these instructions can result in death

or fire.

REMEMBER: When range is in use, the entire cooktop area may become hot.

base with the orifice holder on the cooktop and the igniter electrode with the notch in the burner base.

Electric igniters automatically light the surface burners when control knobs are turned to IGNITE.

Before setting a control knob, place filled cookware on the grate. Do not operate a burner using empty cookware or without cookware on the grate.

To Set:

1. Push in and turn knob counterclockwise to IGNITE.

All surface burners will click. Only the burner with the control knob turned to IGNITE will produce a flame.

2. Turn knob to anywhere between HIGH and LOW.

Power Failure

In case of prolonged power failure, the surface burners can be lit manually. Hold a lit match near a burner, and then turn knob counterclockwise to IGNITE. After burner lights, turn knob to setting.

Surface Burners

IMPORTANT: Do not obstruct the flow of combustion and ventilation air around the burner grate edges.

Burner Cap: Always keep the burner cap in place when using a surface burner. A clean burner cap will help avoid poor ignition and uneven flames. Always clean the burner cap after a spillover, and routinely remove and clean the caps according to the “General Cleaning” section.

A. Burner cap B. Gas tube opening C. Burner base

Gas Tube Opening: Gas must flow freely throughout the gas tube opening for the burner to light properly. Keep this area free of soil, and do not allow spills, food, cleaning agents or any other material to enter the gas tube opening. Keep spillovers out of the gas tube opening by always using a burner cap.

A. 1 to 1

¹⁄₂

B. Burner ports

Burner Ports: Check burner flames occasionally for proper size and shape as shown in the previous illustration. A good flame is blue in color, not yellow. Keep this area free of soil, and do not allow spills, food, cleaning agents or any other material to enter the burner ports.

" (2.5 to 3.8 cm)

D. Igniter electrode

E. Orifice holder

To Clean:

IMPORTANT: Before cleaning, make sure all controls are off and

the cooktop is cool. Do not use oven cleaners, bleach or rust removers. Do not wash in the dishwasher.

1. Remove the burner cap and the burner base, and then clean

according to “General Cleaning” section.

2. Clean the gas tube opening with a damp cloth.

3. Clean clogged burner ports with a straight pin as shown. Do

not enlarge or distort the port. Do not use a wooden toothpick. If the burner needs to be adjusted, contact a trained repair specialist.

4. Replace the burner base. See the following illustration for

Large (most

powerful)

burner positions.

The surface grates interlock using the hooks on the middle grate and the indents on the end grates. To remove the grates, remove the end grates first, and then remove the middle grate. To replace the grates, replace the middle grate first, and then place the end grates on either side.

A. Indent B. Hook

A. Small

B. X-Large

C. Oval D. Medium

E. Large

5. Replace the burner cap, making sure it is properly aligned with

the burner base. The burner cap should not rock or wobble when properly aligned.

A. Incorrect B. Correct

IMPORTANT: The bottom of the small and medium caps are different. Do not put the wrong size burner cap on the burner base.

Small cap Medium cap Large cap X-Large cap

Although the burner grates are durable, they will gradually lose their shine and/or discolor due to the high temperatures of the gas flame.

Burner Size

Select a burner that best fits your cookware. See the following illustration and chart.

Burner Size Recommended Use

Small ■ Low-heat cooking

■ Melting chocolate or butter

Medium ■ Multipurpose burner

6. Turn on the burner. If the burner does not light, check cap

alignment. If the burner still does not light, turn off the burner. Do not service the burner yourself. Contact a trained repair specialist.

Surface Grates

The grates must be properly positioned before cooking. In the proper position, the grates should be flush and level. Improper installation of the grates may result in chipping or scratching of the cooktop.

To ensure proper positioning, align bumpers on grate bottom with the indentations in the cooktop.

A. Bumpers B. Alignment indentations

Large ■ For large cookware Large (most

powerful)

■ For large cookware

■ Most powerful burner

Griddle

1 0

1 2

1 3

1 4

1 5

1 6

1 7

1 8

1 9

2 0

Griddle installed on right side of cooktop

To Use the Griddle:

1. Locate the griddle on the right side grate, as shown. The

locating feet on the bottom of the griddle will engage the grate tines to keep the griddle from sliding.

2. Before each use, brush on a thin layer of cooking oil to keep

food from sticking. Cooking sprays may leave a sticky residue on the griddle that is hard to remove.

3. Preheat the griddle for 5 minutes. Preheating the griddle

slowly will ensure even heat distribution and will avoid warping the griddle.

4. For preheating and cooking, set the front burner to the lowest

heat setting and the rear burner to medium-high heat for best performance.

NOTE: The griddle may also be used on the left side grate. For best results, the rear burner setting should be set to MediumLow or Medium, and the front burner setting should be set to Low.

Cookware

IMPORTANT: Do not leave empty cookware on a hot surface cooking area, element or surface burner.

Ideal cookware should have a flat bottom, straight sides and a wellfitting lid, and the material should be of medium-to-heavy thickness.

Rough finishes may scratch the cooktop or grates. Aluminum and copper may be used as a core or base in cookware.

Cookware material is a factor in how quickly and evenly heat is transferred, which affects cooking results.

Cookware with nonstick surfaces should not be used under the broiler.

Check for flatness by placing the straight edge of a ruler across the bottom of the cookware. While you rotate the ruler, no space or light should be visible between it and the cookware.

Use the following chart as a guide for cookware material characteristics.

Cookware Characteristics

To Clean the Griddle:

1. Let the griddle cool, and then empty the drip tray.

2. See the “General Cleaning” section for cleaning instructions.

3. Store griddle in a cool dry place.

Aluminum ■ Heats quickly and evenly.

■ Suitable for all types of cooking.

■ Medium or heavy thickness is best for

most cooking tasks.

Cast iron ■ Heats slowly and evenly.

■ Good for browning and frying.

■ Maintains heat for slow cooking.

Cookware Characteristics

Ceramic or Ceramic glass

Copper ■ Heats very quickly and evenly.

Earthenware/ Stoneware

Porcelain enamel-on-steel or cast iron

Stainless steel ■ Heats quickly, but unevenly.

■ Follow manufacturer’s instructions.

■ Heats slowly, but unevenly.

■ Ideal results on low to medium heat

settings.

■ May leave copper residues, which may

be diminished if cleaned immediately after cooking.

■ Follow manufacturer’s instructions.

■ Use on low heat settings.

■ See stainless steel or cast iron.

■ A core or base of aluminum or copper

on stainless steel provides even heating.

For best results, the cookware should be centered above the burner with the bottom sitting level on the grate. The flame should be adjusted so that it does not extend up the sides of the pan.

Home Canning

When canning for long periods, alternate the use of surface burners between batches. This allows time for the most recently used areas to cool.

■ Center the canner on the grate above the burner.

■ Do not place canner on 2 surface burners at the same time.

■ For more information, contact your local agricultural extension

office, or refer to published home canning guides. Companies that manufacture home canning products can also offer assistance.

Odors and smoke are normal when the oven is used the first few

Oven

7 6 5 4 3

times or when it is heavily soiled. IMPORTANT: The health of some birds is extremely sensitive to

the fumes given off by the oven. Exposure to the fumes may result in death to certain birds. Always move birds to another closed and well-ventilated room.

Aluminum Foil

IMPORTANT: To avoid permanent damage to the oven bottom finish, do not line the oven bottom with any type of foil or liner.

For best cooking results, do not cover entire oven rack with foil because air must be able to move freely.

Positioning Racks and Bakeware

IMPORTANT: To avoid permanent damage to the porcelain finish, do not place food or bakeware directly on the oven door or bottom.

Bakeware

To cook food evenly, hot air must be able to circulate. Allow 2" (5

cm) of space around bakeware and oven walls. Make sure that

no bakeware piece is directly over another.

Racks

■ Position racks before turning on the oven.

■ Do not position racks with bakeware on them.

■ Make sure racks are level.

To position a rack, pull it out to the stop position, raise the front edge, and then lift out. Use the following illustration and charts as a guide.

A. Ends of rack in position 3 B. Food in position 2

IMPORTANT: These rack positions are for flat racks. If a Max Capacity Oven Rack is used, the rack position must be adjusted as shown in the previous figure.

Multiple Rack Cooking

2-rack (non-convection): Use rack positions 2 and 5 or 3 and 6. 2-rack (convection): Use rack positions 2 and 5 or 3 and 6. 3-rack (convection): Use rack positions 2 and 7 and a Max

Capacity Oven Rack in rack position 5.

Baking Cookies and Layer Cakes on 2 Racks

Baking Layer Cakes

For best results when baking cakes on 2 racks, use the Convection Bake function, a flat rack in rack position 2 and a Max Capacity Oven rack in rack position 6. Place the cakes on the racks as shown. Keep at least 3" (7.6 racks and the front cakes.

cm) of space between the front of the

The oven has 7 positions for a flat rack, as shown in the previous illustration and the following table.

Flat Rack Position* Type of Food

7 Broiling/searing meats, hamburgers,

6 Broiled meats, poultry, fish

3 or 4 Most baked goods, casseroles, frozen

2 Roasted meats

1 Large roasts or poultry

For hamburger patties to have a well-seared exterior and a rare interior, use a flat rack in rack position approximately 2½ to 3½ minutes. Side 2 should cook for approximately 4 to 5 when broiling.

*If your model has a Max Capacity Oven Rack, the recessed ends

must be placed in the rack position above the desired position of the food. See the following illustration.

steaks

foods

7. Side 1 should cook for

minutes. Expect a moderate degree of smoke

Baking Cookies

For best results when baking cookies on 2 racks, use the Convection Bake function, a flat rack in rack position 2 and a Max Capacity Oven rack in rack position 6.

Roll-Out Rack

The roll-out rack allows easy access to position and remove food in the oven. It is not recommended to use the roll-out rack in the top rack, position 7, or the bottom rack, position 1.

Open Position

A. Rack frame B. Sliding rack

Closed and Engaged Position

3. Lower the front of the rack assembly, and then gently slide

rack assembly into oven, bypassing the “V” cutouts. Push the rack assembly into the oven until it stops at the ladder in the back of the oven.

A. “V” cutout B. Rack guides C. Ladder hook D. Ladder

4. Reach through the rack to hold the sliding rack and the front

crossbar. Lift the front of the rack assembly, and then push the rack assembly to the back of the oven. Lower the front of the rack assembly so the ladder hook engages with the ladder on both sides of the oven.

A. Rack frame B. Sliding rack

To Insert Roll-Out Rack

1. Angle the front of the rack assembly up, and then insert the

rack frame into the “V” cutout in the rack guides of the oven cavity.

A. “V” cutout B. Rack guides

2. Keep rack assembly lifted up at an angle, and then push in to

bypass the lower “V” cutout.

A. Sliding rack B. Front crossbar

To Remove Roll-Out Rack

1. Push the sliding rack in completely so that it is in the closed

and engaged position.

2. Reach through the rack to hold the sliding rack and the front

crossbar. Lift the front of the rack assembly to disengage the ladder hook from the ladders at the rear of the oven, and then pull the rack assembly forward.

3. Using 2 hands, gently pull the sliding rack and the rack frame

at the same time to the “V” cutout. Angle the rack so that the front is higher than the back, and then gently pull rack past “V” cutout and then out of the oven.

To avoid damage to the sliding rack, do not place more than 25 lbs (11.4 kg) on the rack.

Do not clean the roll-out rack in a dishwasher. It may remove the rack’s lubricant and affect its ability to slide.

See the “General Cleaning” section for more information.

Oven Vent

A. Oven vent

The oven vent releases hot air and moisture from the oven, and should not be blocked or covered. Blocking or covering the oven vent will cause poor air circulation, affecting cooking and cleaning results. Do not set plastics, paper or other items that could melt or burn near the oven vent.

Sabbath Mode

The Sabbath Mode sets the oven to remain on in a bake setting until turned off.

When the Sabbath Mode is set, only the Bake cycle will operate. All other cooking and cleaning cycles are disabled. No tones will sound, and the displays will not indicate temperature changes.

When the oven door is opened or closed, the oven light will not turn on or off, and the heating elements will not turn on or off immediately.

To Enable Sabbath Mode Capability (One Time Only):

1. Press OPTIONS/CLOCK until “SABBATH” is displayed.

“OFF. Press (1) for On” will scroll in the display.

2. Press the “1” keypad. “ON. Press (1) for Off” will scroll in the

display. Sabbath Mode can be activated for baking.

3. Press START or CANCEL UPPER to exit and display the time

of day. NOTE: To disable the Sabbath Mode, repeat steps 1 through 3

to change the status from “SABBATH ON” to “SABBATH OFF.”

To Activate Sabbath Mode:

1. Press BAKE for the desired oven.

2. Press the number keypad to set a temperature other than

3. Press START.

4. Press OPTIONS/CLOCK. Three tones will sound. Then press

To Adjust Temperature (When Sabbath Mode is Running):

1. Press the number keypad as instructed by the scrolling text to

2. Press START.

To Deactivate Sabbath Mode:

Press OPTIONS/CLOCK, and then press “7” to return to regular baking, or press CANCEL for the desired oven to turn off the range.

(177°C).

350°F

For timed cooking in Sabbath Mode, press COOK TIME, and then the number keypads to set the desired cook time.

“7.” “SAb” will appear in the display.

select the new temperature. NOTE: The temperature adjustment will not appear on the

display. The scrolling text will be shown on the display as it was before the keypad was pressed.

Baking and Roasting

Preheating

The oven will take

350°F (177°C)

with all of

Oven Temperature

While in use, the oven elements will cycle on and off as needed to maintain a consistent temperature, but they may run slightly hot or cool at any point in time due to this cycling. Opening the oven door while in use will release the hot air and cool the oven which could impact the cooking time and performance. It is recommended to use the oven light to monitor cooking progress.

NOTE: On models with convection, the convection fan may run in the non-convection bake mode to improve oven performance.

Temperature Management System

The Temperature Management System electronically regulates the oven heat levels during preheat and bake to maintain a precise temperature range for optimal cooking results. The bake and broil elements or burners cycle on and off in intervals. On convection range models, the fan will run while preheating and may be cycled on and off for short intervals during bake to provide the best results. This feature is automatically activated when the oven is in use.

Before baking and roasting, position racks according to “Positioning Racks and Bakeware” section. When roasting, it is not necessary to wait for the oven preheat cycle to end before putting food in unless it is recommended in the recipe.

Broiling

When broiling, preheat the oven for 5 minutes before putting food in unless recommended otherwise in the recipe. Position food on grid in a broiler pan, and then place it in the center of the oven rack.

IMPORTANT:

Changing the temperature when broiling allows more precise control when cooking. The lower the broil setting, the slower the cooking. Thicker cuts and unevenly shaped pieces of meat, fish and poultry may cook better at lower broil settings. Use racks 6 or 7 for broiling. Refer to the “Positioning Racks and Bakeware” section for more information.

On lower settings, the broil element will cycle on and off to maintain the proper temperature.

■ For best results, use a broiler pan and grid. It is designed to

drain juices and help avoid spatter and smoke. If you would like to purchase a broiler pan, one may be

ordered. See the “Accessories” section.

Close the door to ensure proper broiling temperature.

Convection Cooking

Proofing Bread

In a convection oven, the fan-circulated hot air continually distributes heat more evenly than the natural movement of air in a standard thermal oven. This movement of hot air helps maintain a consistent temperature throughout the oven, cooking foods more evenly, crisping surfaces while sealing in moisture and yielding crustier breads.

During convection baking or roasting, the bake, broil and convection elements cycle on and off in intervals while the fan circulates the hot air. During convection broiling, the broil and convection elements cycle on and off.

If the oven door is opened during convection cooking, the fan will turn off immediately. It will come back on when the oven door is closed.

With convection cooking, most foods can be cooked at a lower temperature and/or a shorter cooking time than in a standard thermal oven. When using Manual Convect Modes, reduce the time and temperature when setting the oven. Use the following chart as a guide.

Convection Mode Time/Temp. Guidelines

Convection Bake 25°F (15°C) lower temperature,

possible shortened cooking time

Convection Roast Cooking time shortened by up to 30%

Convection Broil Shortened cooking time

When using Auto Convect Modes, the oven will automatically adjust the time and temperature for the selected mode.

Convect Modes

Manual Convect Modes:

Convect Bake - Multiple-rack baking or cookies, biscuits, breads, casseroles, tarts, tortes, cakes.

Convect Roast - Whole chicken or turkey, vegetables, pork roasts, beef roasts.

Convect Broil - Thicker cuts or unevenly shaped pieces of meat, fish or poultry.

Auto Convect Modes:

Meats - Chicken: whole and pieces; meat loaf; roasts: pork, beef, ham.

Baked Goods - Biscuits, quick breads, yeast breads, cakes, cookies, casseroles.

Others - Frozen convenience foods: french fries, nuggets, fish sticks, lasagna, pizza.

Proofing bread prepares the dough for baking by activating the yeast. Follow the recipe directions as a guide. Proof should be used for fresh dough, thawed dough, and for the first and second rise.

To Proof:

Before first proofing, place the dough in a lightly greased bowl and cover loosely with wax paper, coated with shortening. Place on rack guide 2 and close the oven door.

NOTE: If the temperature of the oven is greater than 120°F (49°C), “Oven Cooling” will be displayed until the temperature is less than 120°F (49°C).

1. Press PROOF.

2. Press START.

Let the dough rise until nearly doubled in size. Proofing time may vary depending on dough type and quantity.

3. Press CANCEL UPPER when finished proofing. Before second proofing, shape the dough, place it in baking pan(s)

and cover loosely. Follow the same placement and control steps above. Before baking, remove the cover.

NOTE: If the oven temperature is greater than 120°F (49°C), the display will indicate “Oven Cooling” until the temperature is below 120°F (49°C).

Favorite

Favorite stores the oven mode and temperature for your favorite recipe. Favorite can only be stored for the upper oven.

To Save a Recipe:

1. While the oven is being used for Bake, Broil, Convect Bake,

Convect Roast or Convect Broil, press and hold FAVORITE for 3 seconds.

2. The current oven mode, cook time and temperature will be

displayed. “SAVED” will be displayed. The recipe has been saved.

NOTE: Only one recipe can be saved at a time. Saving a new recipe will overwrite a previously saved recipe.

To Select the Favorite Recipe:

1. Press FAVORITE. The saved oven mode and temperature will

be displayed.

NOTE: Favorite does not store cook times.

2. Press START.

3. Once the recipe is selected, oven will begin preheating to the

set program.

4. To change the temperature, press the number keypads to set

the desired temperature.

5. Press START.

6. To change the cook time, press COOK TIME.

7. Press the number keypads to set the desired cook time.

8. Press START.

9. Press CANCEL when finished cooking.

Cook Time

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before or after cooking.

Doing so can result in food poisoning or sickness.

WARNING

Food Poisoning Hazard

Do not let food sit for more than one hour before or after cooking.

Doing so can result in food poisoning or sickness.

IMPORTANT: Always use the baking drawer rack when using the Baking Drawer.

To Set a Timed Cook:

1. Press BAKE, BROIL, or press AUTO CONVECT MODES or

MANUAL CONVECT MODES until the desired convection mode appears on the display.

2. Press the number keypads to enter a temperature other than

the one displayed.

3. Press COOK TIME. The cook time oven indicator light will light

up.

4. Press the number keypads to enter the length of time to cook.

5. Press START. The display will count down the time. When the

time ends, the oven will shut off automatically.

6. Press CANCEL for the desired oven to clear the display.

To Set a Delayed Timed Cook:

1. Press BAKE, BROIL, or press AUTO CONVECT MODES or

MANUAL CONVECT MODES until the desired convection mode appears on the display.

2. Press the number keypads to enter a temperature other than

the one displayed.

3. Press COOK TIME. The cook time oven indicator light will light

up.

4. Press number keypads to enter the length of time to cook.

5. Press DELAY START.

6. Press number keypads to enter the number of hours and/or

minutes you want to delay the start time.

7. Press START. When the start time is reached, the oven will automatically turn on.

The temperature and/or time settings can be changed anytime after pressing Start by repeating steps 2 through 7. When the set cook time ends, the oven will shut off automatically.

8. Press CANCEL for the desired oven to clear the display.

Baking Drawer

A. Baking drawer B. Baking drawer rack C. Baking drawer rack handles

See the “General Cleaning” section for more information.

To Bake with the Baking Drawer:

1. Press LOWER OVEN BAKE.

2. Set the desired temperature between 170°F and 451°F (75°C

and 233°C) using the number keypads. The default temperature is 350°F (180°C).

3. Press START.

4. To change the temperature, repeat steps 2 and 3.

5. Press CANCEL LOWER when finished.

6. Remove food from the drawer.

To Keep Warm with the Baking Drawer:

Food must be at serving temperature before placing it in the warmed drawer.

1. Place food in the baking drawer.

2. Press LOWER OVEN KEEP WARM.

3. Set the desired temperature between 145°F and 190°F (63°C

and 88°C) using the number keypads. The default temperature is 170°F (75°C).

4. Press START.

5. Press CANCEL LOWER when finished.

6. Remove food from the baking drawer.

Oven Light

The oven light is a standard 40-watt appliance bulb. Before replacing, make sure the oven and cooktop are cool and the control knobs are in the Off position.

To Replace:

1. Unplug range or disconnect power.

2. Turn the glass bulb cover in the back of the oven

counterclockwise to remove.

3. Turn bulb counterclockwise to remove from socket.

4. Replace bulb by turning clockwise.

5. Replace bulb cover by turning clockwise.

6. Plug in range or reconnect power.

The Baking Drawer is highly recommended for baking frozen foods. Use the temperature and medium cook time given on the frozen food packaging. For example, if the packaging suggests a cook time of 15 to 20 Check food for doneness before removing from the Baking Drawer.

The Baking Drawer may also be used for conventional baking and keeping hot cooked foods warm. It is not recommended to prepare foods taller than the height of the baking drawer rack handles or foods that may rise above 2½" (6.4

minutes, set the cook time for 17 minutes.

cm) in the Baking Drawer.

+ 39 hidden pages