Jenn-Air WEG760H0DS0, WEG760H0DH0, WEG760H0DE0, WEG730H0DW0, WEG730H0DS0 Owner’s Manual

...

Wh User Guide

Gas Range

THANK YOU for purchasing this high-quality product. Register your range at www.whirlpool.com. InCanada, register your range at www.whirlpool.ca

For future reference, please make a note of your product model and serial numbers. These can be found on the label located on the oven frame behind the top right side of the oven door.

Model Number ..................................................................... Serial Number ......................................................................

Para una versi6n de estas instrucciones en espaSol, visite www.whirlpool.com. Debera tener a mano el nQmerode modelo y de serie, que estan ubicados en el marco del homo, detras del lado derecho superior

de la puerta del homo.

Table of Contents

RANGE SAFETY ............................................................................ 2

The Anti-Tip Bracket ................................................................... 3

KEY USAGE TIPS .......................................................................... 4

AquaLift ®Self-Cleaning Technology ........................................... 4

Surface Temperatures ................................................................ 4

Preheating ................................................................................... 4

Surface Burners .......................................................................... 4

FEATURE GUIDE ........................................................................... 5

Electronic Oven Controls ............................................................ 7

COOKTOP ...................................................................................... 9

Surface Burners .......................................................................... 9

Surface Grates .......................................................................... 10

Burner Size ................................................................................ 11

Cookware .................................................................................. 11

Home Canning .......................................................................... 12

OVEN ............................................................................................ 12

Aluminum Foil............................................................................ 12

Positioning Racks and Bakeware ............................................. 12

Oven Vent .................................................................................. 13

Sabbath Mode .......................................................................... 13

Baking and Roasting................................................................. 13

Broiling ...................................................................................... 14

Convection Cooking ................................................................. 14

Cook Time ................................................................................. 14

Oven Light ................................................................................. 14

RANGE CARE .............................................................................. 15

Clean Cycle ............................................................................... 15

General Cleaning ....................................................................... 16

PROBLEM SOLVER .................................................................... 17

ACCESSORIES ............................................................................ 19

WAR RANTY ................................................................................. 20

W10665261A

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death,

- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance,

- WHAT TO DO IF YOU SMELL GAS:

• Do not try to light any appliance.

• Do not touch any electrical switch.

• Do not use any phone in your building.

• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

• If you cannot reach your gas supplier, call the fire department.

- Installation and service must be performed by a qualified installer, service agency or the gas supplier,

WARNING: Gas leaks cannot always be detected by smell.

Gas suppliers recommend that you use a gas detector approved by UL or CSA. For more information, contact your gas supplier.

If a gas leak is detected, follow the "What to do if you smell gas" instructions.

State of California Proposition 65 Warnings: WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.

...... Anti Tip Bracket

The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without the anti-tip bracket fastened down properly.

Tip Over Hazard

A child or adult can tip the range and be killed. Verify the anti-tip bracket has been properly installed and engaged per installation instructions.

Re-engage anti-tip bracket if range is moved. Do not operate range without anti-tip bracket installed and engaged.

Failure to follow these instructions can result in death or serious burns to children and adults.

To verify the anti-tip bracket is installed and engaged:

-"Bracket Anti-Tip

Range Foot

• Slide range forward.

• Look for the anti-tip bracket securely attached to floor or wall.

• Slide range back so rear range foot is under anti-tip bracket.

• See installation instructions for details.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electrical shock,

injury to persons, or damage when using the range, follow

basic precautions, including the following:

• WARNING: TO REDUCE THE RISK OF TIPPING OF

THE RANGE, THE RANGE MUST BE SECURED BY PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK

IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET

SECURELY ATTACHED TO FLOOR OR WALL, AND SLIDE RANGE BACK SO REAR RANGE FOOT IS UNDER ANTI-TIP BRACKET.

• WARNING: NEVER use this appliance as a space

heater to heat or warm the room. Doing so may result in carbon monoxide poisoning and overheating of the oven.

• WARNING: NEVER cover any slots, holes or passages

in the oven bottom or cover an entire rack with materials such as aluminum foil. Doing so blocks air flow through the

oven and may cause carbon monoxide poisoning. Aluminum foil linings may also trap heat, causing a fire

hazard.

• CAUTION: Do not store items of interest to children in

cabinets above a range or on the backguard of a range - children climbing on the range to reach items could be

seriously injured.

• Proper Installation - The range, when installed, must be electrically grounded in accordance with local codes or, in

the absence of local codes, with the National Electrical

Code, ANSI/NFPA 70. In Canada, the range must be electrically grounded in accordance with Canadian

Electrical Code. Be sure the range is properly installed and grounded by a qualified technician.

• This range is equipped with a three-prong grounding plug

for your protection against shock hazard and should be

plugged directly into a properly grounded receptacle. Do not cut or remove the grounding prong from this plug.

• Disconnect power before servicing.

• Injuries may result from the misuse of appliance doors or drawers such as stepping, leaning, or sitting on the doors

or drawers.

• Maintenance - Keep range area clear and free from

combustible materials, gasoline, and other flammable vapors and liquids.

• Storage in or on the Range - Flammable materials should not be stored in an oven or near surface units.

• Top burner flame size should be adjusted so it does not extend beyond the edge of the cooking utensil.

For self-cleaning ranges -

• Before Self-Cleaning the Oven - Remove broiler pan and other utensils. Wipe off all excessive spillage before

initiating the cleaning cycle.

SAVE THESE INSTRUCTIONS

Aqua_,,,,,,,,,if__;_'Self_O_eaning ""_"ecBno_ogy

Aqua ,ift°

Self-Cleaning

Technology

AquaLift ®Self-Cleaning Technology is a first-of-its-kind cleaning solution designed to minimize the time, temperature, and odors that ordinarily come with traditional self-cleaning methods. With AquaLift ®Self-Cleaning Technology, an innovative coating on the

interior of the oven is activated with heat and water to release baked-on soil. To use AquaLift _ Self-Cleaning Technology, simply

wipe out loose debris, pour water into the oven bottom, and run the AquaLift ®Self-Cleaning cycle. When the cycle finishes in under 1 hour at a lower temperature than traditional self-cleaning methods, just wipe out the remaining water and loose debris. See the "Clean Cycle" section for more detailed instructions. For additional information, frequently asked questions and videos on using AquaLift _ Self-Cleaning Technology, visit our website at

http :llwhr.pl.comlaqualift

Su ace ""fempe atu es

When the range is in use, all range surfaces may become hot, such as the knobs and oven door.

Su ace IBume s

The burner bases and caps must be properly positioned before cooking. Your range comes with three sizes of burners and caps. Align the burner bases as shown in the following illustration:

A D

B E

A. Small C. Medium D. Medium B. Large E. Large

Align the gas tube opening in the burner base with the orifice holder on the cooktop and the igniter electrode with the notch in

the burner base.

Warming or Storage Drawer When the oven is in use, the drawer may become hot. Do not store

plastics, cloth, or other items that could melt or burn in the drawer. Oven Vent The oven vent releases hot air and moisture from the oven, and

should not be blocked or covered. Do not set plastics, paper or other items that could melt or burn near the oven vent.

When beginning a Bake, Convect Bake or Convect Roast cycle, the oven will begin preheating after Start is pressed. The oven will take

approximately 12-15 minutes to reach 350°F (177°C) with all of the oven racks provided with your oven inside the oven cavity. Higher

temperatures will take longer to preheat. The preheat cycle rapidly increases the oven temperature. The actual oven temperature will

go above your set temperature to offset the heat lost when your oven door is opened to insert food. This ensures that when you

place your food in the oven, the oven will begin at the proper temperature. Insert your food when the preheat tone sounds. Do

not open the door during preheat before the tone sounds.

\--_ • ....... ._JJ

A.Burner cap D. Igniter electrode B.Gas tube opening E.Orifice holder

C.Burner base

Place the burner caps on the appropriate burner bases.

Small cap Medium cap Large cap

Burner caps should be level when properly positioned. If burner caps are not properly positioned, surface burners will not light. The burner cap should not rock or wobble when properly aligned.

A. Incorrect B. Correct

This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or the Product Help section of our website at www.whirlpool.com for more detailed instructions. In Canada, refer to the Product Help Section at www.whirlpool.ca.

Food Poisoning Hazard

Do not let food sit in oven more than one hour before or after cooking.

Doing so can result in food poisoning or sickness.

1 2 3

4 5 6

7 8 9

o ÷_

:' AquaLift i : Self Clean :

Start Cancel

;5(c>) _®i_

KEYPAD SETTINGS/

CLOCK

[] [] [] -_

Frozen Broil Keep

Bake Bake Warm

Convect

Modes

FEATURE INSTRUCTIONS Clock

The Clock can use a 12- or 24-hour cycle. See the "Electronic Oven Control" section.

1. Press SETTINGS/CLOCK until "CLOCK" is displayed.

Cook Delay Rapid _ Settings/ Time Start Preheat _ Clock

2. Press START to change the time.

3. Press "3" for AM or "6" for PM.

4. Use the number keypad to set the time of day.

5. Press SETTINGS/CLOCK or START to save the setting.

SETTINGS/ Settings CLOCK

Enables you to personalize the audible tones and oven operation to suit your needs. See the

"Electronic Oven Control" section.

OVEN LIGHT Oven cavity light The oven light is controlled by a keypad on the oven control panel. While the oven door is closed,

:'0" press the oven light keypad to turn the light on and off. When the oven door is opened, the oven

= light will automatically come on.

Oven timerTIMER

(Set/Off)

The Timer can be set in hours or minutes up to 9 hours and 59 minutes.

Press TIMER SET/OFR

Press the number keypads to set the length of time in hr-min-min. Leading zeroes do not have to be entered. For example, for 2 minutes, enter "2."

Press TIMER SET/OFF to begin the countdown. If enabled, one tone will sound at end of

countdown.

Press TIMER SET/OFF again to cancel the Timer and return to the time of day. Do not press

the Cancel keypad because the oven will turn off.

Ifthe Timer is running, but not in the display, press TIMER SET/OFF to display the countdown

for 5 seconds.

START The Start keypad begins any oven function. If Start is not pressed within 2 minutes after pressing a

Cooking start

keypad, the function is canceled and the time of day is displayed.

CANCEL The Cancel keypad stops any function except the Clock and Timer. BAKE 1. Press BAKE.

Range function Baking and

roasting

2. Press the number keypads to set the desired temperature.

3. Press START.

4. To change the temperature, repeat steps 2 and 3.

5. Press CANCEL when finished.

KEYPAD FROZEN

BAKE

BROIL

CONVECT MODES

KEEP WARM

DELAY START

COOK TIME

RAPID PREHEAT

FEATURE Prepackaged

food

Broiling

Convection

cooking

Hold warm

Delayed start

Timed cooking

Rapid oven preheating

INSTRUCTIONS

Position the food on a flat rack in the oven on rack position 4. See the "Positioning Racks and Bakeware" section.

NOTE: Cook only 1 package of frozen food at a time when using FrozenBake TM Technology.

2. Press FROZEN BAKE.

3. Press the number keypad to select the desired food option.

4. Press the number keypads to set the temperature as recommended on the food packaging.

5. Press COOK TIME.

6. Press the number keypads to set the max cook time as recommended on the food packaging.

7. Press START. The range will calculate the best cook time based on the current oven temperature.

NOTE: The cook time that appears in the display is the estimated required cook time as calculated by the oven control. It may be different than the time you entered. A beep will alert you to check the food's doneness with at least 2 minutes remaining on the timer. Follow the prompts on the display to select more time if desired.

8. At the end of the cook time, a beep will alert you to check the food's doneness. Follow the prompts on the display to select more time if desired. Unless more time is selected, the bake

element turns off.

9. Press CANCEL when finished.

1. Press BROIL.

2. Select the broiling temperature by pressing 1 - High or 2 - Low.

3. Press START and allow the oven to preheat for 2 minutes.

4. To change the temperature, repeat steps 2 and 3.

5. Position the cookware in the oven and close the door.

6. Press CANCEL when finished.

1. Press CONVECT MODES until the desired convection mode appears in the display.

2. Press START.

3. Press the number keypads to set the desired temperature.

4. Press START.

5. To change the temperature, repeat steps 3 and 4. Press START or wait for the change to take

effect.

6. Press CANCEL when finished.

Food must be at serving temperature before placing it inthe warmed oven.

1. Press KEEP WARM.

2. Set the desired temperature between 145°F (63°C) and 190°F (88°C) using the number

keypads. The default temperature is 170°F (75°C).

3. Press START.

4. To change the temperature, repeat steps 2 and 3.

5. Press CANCEL when finished.

The DELAY START keypad is used to enter the starting time for an oven function with a delayed start. Delay Start should not be used for foods such as breads and cakes because they may not

bake properly.

To set aTimed Cook or a Delayed Timed Cook, see "Cook Time" section. Timed Cooking allows the oven to be set to turn on at a certain time of day, cook for a set length of

time, and/or shut off automatically. To set aTimed Cook or a Delayed Timed Cook, see "Cook Time" section.

Provides the fastest preheat time for the Bake function. Rapid Preheat is preset for Off, but it can

be changed to On.

1. Press RAPID PREHEAT.

2. The current setting will be displayed.

3. Press the "1" keypad to adjust the setting.

4. Press START or CANCEL to exit and display the time of day.

IMPORTANT: This feature should only be used for one-rack baking. Unused racks should be removed prior to Rapid Preheat. A standard rack should be used for Rapid Preheat.

If preheating for the Bake cycle has already started, Rapid Preheat may be started directly by pressing RAPID PREHEAT.

KEYPAD AOUALIFT

SELF CLEAN START

(hold 3 sec

to lock)

ENERGY SAVE

FEATURE INSTRUCTIONS Clean cycle See the "Clean Cycle" section.

Oven control lockout

Puts the range into sleep mode

to reduce energy

usage

IIE)eot oHio Oven OoHt o)s

1. Check that the oven is off.

2. Press and hold START (hold 3 sec to lock) for 3 seconds.

3. A tone will sound, and "Control Locked" will scroll, then "Locked" will be displayed.

4. Repeat to unlock. No keypads will function with the controls locked. The cooktop functions are not affected by the oven control lockout.

1. Press and hold SETTINGS/CLOCK for 3 seconds to change status. The display will scroll "Energy saver on" or "Energy saver off."

If Energy Save is on, the range will go into sleep mode after 5 minutes of inactivity. Any key

press will activate the display. If Energy Save is off, the display will be on at all times.

Control Display

The display will flash when powered up or after a power loss. Press CANCEL to clear. When the oven is not in use, the time of day is displayed. If the range is in Energy Save mode, the display will be

blank when not in use.

Tones

Tones are audible signals, indicating the following: One tone

• Valid pad press

• Oven is preheated (long tone)

• Function has been entered

• Reminder, repeating each minute after the end-of-cycle tones Three tones

• Invalid pad press Four tones

• End of cycle Use the Settings/Clock key to change the tone settings.

Energy Save The Energy Save mode puts the range into sleep mode and

reduces energy consumption. To Activate the Energy Save Mode:

1. Press and hold SETTINGS/CLOCK for 3 seconds. "Energy saver on." will appear in the display.

2. The setting will be activated after 5 minutes.

To Deactivate the Energy Save Mode:

1. Press and hold SETTINGS/CLOCK for 3 seconds. "Energy saver off." will appear in the display.

2. The clock will reappear inthe display, and the range can be operated as usual.

Settings

Many features of the oven control can be adjusted to meet your personal needs. These changes are made using the Settings/

Clock key. Use the Settings/Clock key to scroll through the features that can

be changed. Each press of the Settings/Clock key will advance the display to the next setting. After selecting the feature to be changed, the control will prompt you for the required input. After the setting is saved by pressing Start, press CANCEL to exit Settings and display the time of day. Details of all of the feature changes are explained in the following sections.

Press CANCEL to exit Settings.

Clock

The Clockcan use a 12- or 24-hour cycle.

1. Press SETTINGS/CLOCK until "CLOCK" is displayed.

2. Press START to change the time.

3. Press "3" for AM or "6" for PM.

4. Use the number keypad to set the time of day.

5. Press SETTINGS/CLOCK or START to save the setting.

6. Press CANCEL to exit and display the time of day.

Fahrenheit and Celsius

The temperature is preset at Fahrenheit, but can be changed to Celsius.

1. Press SETTINGS/CLOCK until "TEMP UNIT" is displayed.

2. The current setting will be displayed.

3. Press the "1" keypad to adjust the setting.

4. Press START or CANCEL to exit and display the time of day.

Audible Tones Disable

Turns off all tones, including the end of cycle tone and key press tones. Reminder tones are still active when all tones are disabled.

1. Press SETTINGS/CLOCK until "SOUND" is displayed.

2. The current setting will be displayed.

3. Press the "1" keypad to adjust the setting.

4. Press START or CANCEL to exit and display the time of day. Sound Volume

Sets the pitch of the tone to either high or low.

1. Press SETTINGS/CLOCK until "SOUND VOLUME" is displayed.

2. The current setting will be displayed.

3. Press the "1" keypad to adjust the setting.

4. Press START or CANCEL to exit and display the time of day.

End of Cycle Tone

Activates or turns off the tones that sound at the end of a cycle.

1. Press SETTINGS/CLOCK until "END TONE" is displayed.

2. The current setting will be displayed.

3. Press the "1" keypad to adjust the setting.

4. Press START or CANCEL to exit and display the time of day.

KeyPressTones Activatesorturnsoffthetoneswhenakeypadispressed.

1. PressSETTINGS/CLOCKuntil"KEYPRESSTONE"is displayed.

2. Thecurrentsettingwillbedisplayed.

3. Pressthe"1"keypadtoadjustthesetting.

4. PressSTARTorCANCELtoexitanddisplaythetimeofday.

Reminder Tones Disable

Turns off the short repeating tone that sounds every 1 minute after the end of cycle tones.

1. Press SETTINGS/CLOCK until "REMINDER TONE" is displayed.

2. The current setting will be displayed.

3. Press the "1" keypad to adjust the setting.

4. Press START or CANCEL to exit and display the time of day.

12-Hour Shutoff The oven control is set to automatically shut off the oven 12 hours

after the oven initiates a cook or clean function. This will not interfere with any timed or delay cook functions.

1. Press SETTINGS/CLOCK until "12Hr AUTO_OFF' is displayed.

2. The current setting will be displayed.

3. Press the "1" keypad to adjust the setting.

4. Press START or CANCEL to exit and display the time of day.

Languages - Scrolling Display Text Language options are English, Spanish and French.

1. Press SETTINGS/CLOCK until "LANGUAGE" is displayed.

2. The current setting will be displayed.

3. Press the "1" or "2" keypads to select the desired language.

4. Press START or CANCEL to exit and display the time of day.

12/24 Hour Clock

1. Press SETTINGS/CLOCK until "12/24 HOUR" is displayed.

2. The current setting will be displayed.

3. Press the "1" keypad to adjust the setting.

4. Press START or CANCEL to exit and display the time of day.

Demo Mode IMPORTANT: This feature is intended for use on the sales floor

with 120 V power connection and permits the control features to be demonstrated without heating elements or burners turning on. If this feature is activated, the oven will not work.

1. Press SETTINGS/CLOCK until "DEMO MODE" is displayed.

2. The current setting will be displayed.

3. Press the "1" keypad to adjust the setting.

4. Press START or CANCEL to exit and display the time of day. Sabbath Mode

The Sabbath Mode sets the oven to remain on in a bake setting until turned off.

When the Sabbath Mode is set, only the Bake cycle will operate. All other cooking and cleaning cycles are disabled. No tones will sound, and the displays will not indicate temperature changes.

When the oven door is opened or closed, the oven light will not turn on or off and the heating elements will not turn on or off immediately.

To Enable Sabbath Mode Capability (one time only):

1. Press SETTINGS/CLOCK until "SABBATH" is displayed.

2. The current setting will be displayed.

3. Press the "1" keypad to adjust the setting.

4. Press START to save the setting.

5. Press START or CANCEL to exit and display the time of day.

Oven Temperature Offset Control IMPORTANT: Do not use a thermometer to measure oven

temperature because opening the oven door may cause element or burner cycling to give incorrect readings.

The oven provides accurate temperatures; however, it may cook faster or slower than your previous oven, so the temperature can be adjusted to personalize it for your cooking needs. It can be changed to Fahrenheit or Celsius.

To Adjust Oven Temperature:

1. Press SETTINGS/CLOCK until "TEMP CALIB" is displayed.

2. (On some models) Press "1" to adjust the Warming Drawer temperature calibration. Press START, wait 10 seconds for the display to change, and then continue with Step 3.

OR Press START to adjust the oven temperature calibration. Wait

10 seconds for the display to change then continue with

Step 3.

3. Press the "3" keypad to increase the temperature in 5°F (3°C) increments, or press the "6" keypad to decrease the temperature in 5°F (3°C) increments. The range is from -30°F to +30°F (-18°C to +18°C).

4. Press START or CANCEL to exit and display the time of day.

,'ff ............."-\ A

Fire Hazard

Do not let the burner flame extend beyond the edge of

the pan. Turn off all controls when not cooking.

Failure to follow these instructions can result in death

or fire.

Electric igniters automatically light the surface burners when control knobs are turned to IGNITE.

Before setting a control knob, place filled cookware on the grate. Do not operate a burner using empty cookware or without cookware on the grate.

To Set:

1. Push in and turn knob counterclockwise to IGNITE. All surface burners will click. Only the burner with the control

knob turned to IGNITE will produce a flame.

2. Turn knob to anywhere between HIGH and LOW.

may become hot.

I REMEMBER: When range is in use, the entire cooktop area

Power Failure

In case of prolonged power failure, the surface burners can be lit manually. Hold a lit match near a burner and turn knob

counterclockwise to IGNITE. After burner lights, turn knob to setting.

Su#ace IIBume_s

IMPORTANT: Do not obstruct the flow of combustion and ventilation air around the burner grate edges.

Burner cap: Always keep the burner cap in place when using a surface burner. A clean burner cap will help avoid poor ignition and uneven flames. Always clean the burner cap after a spillover and routinely remove and clean the caps according to the "General Cleaning" section.

Alignment: Be sure to align the gas tube opening in the burner base with the orifice holder on the cooktop and the igniter

electrode with the notch in the burner base.

_--_ • ............ --JJ

A. Burner cap B. Gas tube opening

C. Burner base

Gas tube opening: Gas must flow freely throughout the gas tube opening for the burner to light properly. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the gas tube opening. Keep spillovers out of the gas tube opening by always using a burner cap.

A. 1-1 ½" (25-38 mm)

Burner ports: Check burner flames occasionally for proper size and shape as shown above. A good flame is blue in color, not yellow. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the burner ports.

To Clean: IMPORTANT: Before cleaning, make sure all controls are off and

the cooktop is cool. Do not use oven cleaners, bleach or rust removers. Do not wash in the dishwasher.

1. Remove the burner cap and the burner base and clean according to "General Cleaning" section.

2. Clean the gas tube opening with a damp cloth.

3. Clean clogged burner ports with a straight pin as shown. Do not enlarge or distort the port. Do not use a wooden toothpick. If the burner needs to be adjusted, contact a trained repair specialist.

B. Burner ports

D. Igniter electrode

E.Orifice holder

{

Replace the burner base. See the following illustration for burner positions.

A D

Sudac÷ Grates

The grates must be properly positioned before cooking. In the proper position the grates should be flush and level. Improper installation of the gates may result in chipping or scratching of the cooktop.

To ensure proper positioning, align bumpers on grate bottom with the indentations in the cooktop.

A. Small C. Medium D. Medium B. Large E. Large

Replace the burner cap, making sure it is properly aligned with the burner base. The burner cap should not rock or wobble when properly aligned.

A. Incorrect B. Correct

IMPORTANT: The bottom of the small and medium caps are different. Do not put the wrong size burner cap on the burner

base.

Small cap Medium cap Large cap

Turn on the burner. If the burner does not light, check cap alignment. If the burner still does not light, turn off the burner.

Do not service the burner yourself. Contact a trained repair specialist.

The surface grates interlock using the hook on one end of the grate and the indent on the other. To remove the grates, lift the rear of the left grate off the hook, then lift the front of the right grate off the hook and pull apart. To replace the grates, replace the left grate first. Place the front indent of the right grate over the hook of the left grate, then lift the rear of the left grate and place the indent over the hook on the right grate.

B A

A. Bumpers

B. Alignment indentations

A. Hook

B.Indent

Although the burner grates are durable, they will gradually lose their shine and/or discolor due to the high temperatures of the gas

flame.

IBume Size

Select a burner that best fits your cookware. See the following illustration and chart.

Back of Range

(on some

models)

Front of Ranae ,

.................................................................w _j

Burner Size Recommended Use Small • Low-heat cooking

• Melting chocolate or butter Medium • Multipurpose burner Large • For large cookware Large (most • For large cookware

powerful) • Most powerful burner

IMPORTANT: Do not leave empty cookware on a hot surface cooking area, element or surface burner.

Ideal cookware should have a flat bottom, straight sides and a well- fitting lid, and the material should be of medium-to-heaw

thickness. Rough finishes may scratch the cooktop or coils. Aluminum and

copper may be used as a core or base in cookware. However, when used as a base they can leave permanent marks on the

surfaces. Cookware material is a factor in how quickly and evenly heat is

transferred, which affects cooking results. A nonstick finish has the same characteristics as its base material. For example, aluminum cookware with a nonstick finish will take on the properties of

aluminum. Cookware with nonstick surfaces should not be used under the

broiler. Check for flatness by placing the straight edge of a ruler across the

bottom of the cookware. While you rotate the ruler, no space or light should be visible between it and the cookware.

Use the following chart as a guide for cookware material characteristics.

COOKWARE CHARACTERISTICS

Aluminum

• Heats quickly and evenly.

• Suitable for all types of cooking.

• Medium or heavy thickness is best for most cooking tasks.

• May leave aluminum residues, which may be diminished if cleaned immediately after cooking.

Cast iron

• Heats slowly and evenly.

• Good for browning and frying.

• Maintains heat for slow cooking.

• Rough edges or burrs may scratch the

cooktop.

Ceramic or Ceramic glass

• Follow manufacturer's instructions.

• Heats slowly, but unevenly.

• Ideal results on Iowto medium heat

settings.

• May scratch the cooktop.

Copper

• Heats very quickly and evenly.

• May leave copper residues, which may be diminished if cleaned immediately after cooking

• Can leave a permanent stain or bond to

the cooktop if overheated.

Earthenware

• Follow manufacturer's instructions.

• Use on low heat settings.

• May scratch the cooktop.

Porcelain enamel-on-steel or cast iron

• See stainless steel or cast iron.

• Porcelain enamel bakeware without the metal base may bond to the cooktop if

overheated.

Stainless steel

• Heats quickly, but unevenly.

• A core or base of aluminum or copper on

stainless steel provides even heating.

Use flat-bottomed cookware for best cooking results and energy efficiency. The cookware should be about the same size as the cooking area outlined on the cooktop or the coil element. Cookware should not extend more than 1/2"(1.3 cm) beyond the surface cooking area or element.

Illl om@ Canning

When canning for long periods, alternate the use of surface burners between batches. This allows time for the most recently

used areas to cool.

• Center the canner on the grate above the burner.

Do not place canner on 2 surface burners at the same time. For more information, contact your local agricultural extension

office, or refer to published home canning guides. Companies that manufacture home canning products can also offer

assistance.

Odors and smoke are normal when the oven is used the first few times or when it is heavily soiled.

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off by the oven. Exposure to the fumes may result

in death to certain birds. Always move birds to another closed and well-ventilated room.

IMPORTANT: To avoid permanent damage to the oven bottom finish, do not line the oven bottom with any type of foil or liner.

For best cooking results, do not cover entire oven rack with foil because air must be able to move freely.

IIPosi ioning IIRaoks and IIBakewa ÷

IMPORTANT: To avoid permanent damage to the porcelain finish, do not place food or bakeware directly on the oven door or bottom.

Bakeware

To cook food evenly, hot air must be able to circulate. Allow 2" (5 cm) of space around bakeware and oven walls. Make sure that no bakeware piece is directly over another.

Racks

• Position racks before turning on the oven.

• Do not move racks with bakeware on them.

• Make sure racks are level. To move a rack, pull it out to the stop position, raise the front edge,

and then lift out. Use the following illustration and charts as a guide.

*If your model has a Max Capacity Oven Rack, the recessed ends

must be placed in the rack position above the desired position of the food. See the following illustration.

A. Ends of rack in position 3 B. Food in position 2

IMPORTANT: These rack positions are for flat racks. If a Max Capacity Oven Rack is used, the rack position must be adjusted as shown in the previous figure.

Multiple Rack Cooking 2-rack (non-convection): Use rack positions 2 and 5 or 3 and 6.

2-rack (convection): Use rack positions 2 and 5 or 3 and 6. 3-rack (convection): Use a flat rack in rack positions 2 and 7 and a

Max Capacity Oven Rack in rack position 5.

Baking Cookies and Layer Cakes on 2 Racks Baking Layer Cakes

For best results when baking cakes on 2 racks, use the Convection Bake function, a flat rack in rack position 2 and a Max Capacity

Oven rack in rack position 6. Place the cakes on the racks as shown. Keep at least 3" (7.6 cm) of space between the front of the

racks and the front cakes.

The oven has 7 positions for a flat rack, as shown in the previous illustration and the following table.

Flat Rack Position* Type of Food

7 Broiling/searing meats, hamburgers,

steaks

6 Broiled meats, poultry, fish 3 or 4 Most baked goods, casseroles, frozen

foods

2 Roasted meats

1 Large roasts or poultry

For hamburger patties to have a well-seared exterior and a rare interior, use a flat rack in rack position 7. Side 1 should cook for approximately 21/2- 3_/2minutes. Side 2 should cook for approximately 4-5 minutes. Expect a moderate degree of smoke when broiling.

Baking Cookies For best results when baking cookies on 2 racks, use the

Convection Bake function, a flat rack in rack position 2 and a Max Capacity Oven rack in rack position 6.

Ove VeHt IIIBakiH9 and Roastin 9

A. Oven vent

The oven vent releases hot air and moisture from the oven, and should not be blocked or covered. Blocking or covering the oven

vent will cause poor air circulation, affecting cooking and cleaning results. Do not set plastics, paper or other items that could melt or

burn near the oven vent.

Sabbath Mode

The Sabbath Mode sets the oven to remain on in a bake setting until turned off.

When the Sabbath Mode is set, only the Bake cycle will operate. All other cooking and cleaning cycles are disabled. No tones will sound, and the displays will not indicate temperature changes.

When the oven door is opened or closed, the oven light will not turn on or off and the heating elements will not turn on or off

immediately.

To Enable Sabbath Mode Capability (one time only):

1. Press SETTINGS/CLOCK until "SABBATH" is displayed. "OFR Press (1) for On" will scroll in the display.

2. Press the "1" keypad. "ON. Press (1) for Off" will scroll in the display. Sabbath Mode can be activated for baking.

3. Press START to save the setting.

4. Press CANCEL to exit and display the time of day. NOTE: To disable the Sabbath Mode, repeat steps 1 - 4 to

change the status from "SABBATH ON" to "SABBATH OFF."

To Activate Sabbath Mode:

1. Press BAKE.

2. Press the number keypad to set a temperature other than 350°F (177°C).

3. Press START. For timed cooking in Sabbath Mode, press COOK TIME, then

the number keypad to set the desired cook time.

4. Press SETTINGS/CLOCK. Three tones will sound. Then press "7." "SAb" will appear in the display.

To Adjust Temperature (when Sabbath Mode is running):

1. Press the number keypad as instructed by the scrolling text to select the new temperature.

NOTE: The temperature adjustment will not appear on the display, and no tones will sound. The scrolling text will be shown on the display as it was before the keypad was pressed.

2. Press START.

To Deactivate Sabbath Mode: Press SETTINGS/CLOCK, then press "7" to return to regular

baking or press CANCEL to turn off the range.

Preheating

When beginning a Bake, Convect Bake or Convect Roast cycle, the oven will begin preheating after Start is pressed. The oven will take approximately 12-15 minutes to reach 350°F (177°C) with all of the oven racks provided with your oven inside the oven cavity. Higher temperatures will take longer to preheat. The preheat cycle rapidly increases the oven temperature. The actual oven temperature will go above your set temperature to offset the heat lost when your oven door is opened to insert food. This ensures that when you place your food in the oven, the oven will begin at the proper temperature. Insert your food when the preheat tone sounds. Do not open the door during preheat before the tone sounds.

Rapid Preheat Rapid Preheat can be used to shorten the preheating time. Only

one standard flat oven rack should be in the oven during Rapid Preheat. Extra racks should be removed prior to starting Rapid

Preheat. Press RAPID PREHEAT and follow the oven control prompts, or, if preheating has already started, simply press RAPID

PREHEAT. The preheating cycle should be completed before placing food in the oven. When the Rapid Preheat cycle is complete, the oven starts a normal Bake cycle.

IMPORTANT: Rapid Preheat should be used only for one-rack baking.

Oven Temperature While in use, the oven elements will cycle on and off as needed to

maintain a consistent temperature, but they may run slightly hot or cool at any point in time due to this cycling. Opening the oven door

while in use will release the hot air and cool the oven which could impact the cooking time and performance. It is recommended to

use the oven light to monitor cooking progress. NOTE: On models with convection, the convection fan may run in

the non-convection bake mode to improve oven performance.

ACCUBAKE ®Temperature Management System The ACCUBAKE ®system electronically regulates the oven heat

levels during preheat and bake to maintain a precise temperature range for optimal cooking results. The bake and broil elements or burners cycle on and off in intervals. On convection range models, the fan will run while preheating and may be cycled on and off for short intervals during Bake to provide the best results. This feature is automatically activated when the oven is in use.

Before baking and roasting, position racks according to "Positioning Racks and Bakeware" section. When roasting, it is not

necessary to wait for the oven preheat cycle to end before putting food in unless it is recommended in the recipe.

FrozenBake TM Technology

FrozenBake TM Technology can be used to cook prepackaged frozen food without needing to preheat the oven and without

overbrowning the food. There are 4 preprogrammed food options to choose from: Pizza, Lasagna, Nuggets/Fries, and Pie.

FrozenBake TM Technology should only be used for these foods. Cook only 1 package at a time when using FrozenBake TM

Technology. Use the recommended temperature and maximum recommended time from the packaging.

A beep will alert you to check the food's doneness before the cook time is completed and again at the end of the cook time. The display will prompt you to add to the cook time or end the cycle.

Whenbroiling,preheattheovenfor5minutesbeforeputtingfood inunlessrecommendedotherwiseintherecipe.Positionfoodon gridinabroilerpan,thenplaceitinthecenteroftheovenrack.

IMPORTANT:Closethedoortoensureproperbroiling temperature.

Changingthetemperaturewhenbroilingallowsmoreprecise controlwhencooking.Thelowerthebroilsetting,theslowerthe cooking.Thickercutsandunevenlyshapedpiecesofmeat,fish andpoultrymaycookbetteratlowerbroilsettings.Useracks6or 7forbroiling.Refertothe"PositioningRacksandBakeware"

sectionformoreinformation. Onlowersettings,thebroilelementwillcycleonandoffto

maintainthepropertemperature.

• Forbestresults,useabroilerpanandgrid.Itisdesignedto drainjuicesandhelpavoidspatterandsmoke.

Ifyouwouldliketopurchaseabroilerpan,onemaybe ordered.Seethe"Accessories"section.

Convection Cooking

In a convection oven, the fan-circulated hot air continually distributes heat more evenly than the natural movement of air in a

standard thermal oven. This movement of hot air helps maintain a consistent temperature throughout the oven, cooking foods more

evenly, crisping surfaces while sealing in moisture and yielding crustier breads.

During convection baking or roasting, the bake, broil and convection elements cycle on and off in intervals while the fan circulates the hot air. During convection broiling, the broil and convection elements cycle on and off.

If the oven door is opened during convection cooking, the fan will turn off immediately. It will come back on when the oven door is

closed. With convection cooking, most foods can be cooked at a lower

temperature and/or a shorter cooking time than in a standard thermal oven. Use the following chart as a guide.

Convection Mode Time/Temp. Guidelines Convection Bake 25°F (15°C) lower temperature,

possible shortened cooking time Convection Roast Cooking time shortened by up to 30% Convection Broil Shortened cooking time

Cook

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

To Set a Timed Cook:

1. Press BAKE or BROIL, or press CONVECT MODES until the desired convection mode appears on the display.

2. Press the number keypads to enter a temperature other than the one displayed.

3. Press COOK TIME. The cook time oven indicator light will light up.

4. Press the number keypads to enter the length of time to cook.

5. Press START. The display will count down the time. When the time ends, the oven will shut off automatically.

6. Press CANCEL to clear the display.

To Set a Delayed Timed Cook:

1. Press BAKE or BROIL, or press CONVECT MODES until the desired convection mode appears on the display.

2. Press the number keypads to enter a temperature other than the one displayed.

3. Press COOK TIME. The cook time oven indicator light will light up.

4. Press number keypads to enter the length of time to cook.

5. Press DELAY START.

Press number keypads to enter the number of hours and/or minutes you want to delay the start time.

7. Press START.

When the start time is reached, the oven will automatically turn on. The temperature and/or time settings can be changed anytime after pressing Start by repeating steps 2-7. When the set cook time ends, the oven will shut off automatically.

8. Press CANCEL to clear the display.

Oven Ill,,,igh

The oven light is a standard 40-watt appliance bulb. Before replacing, make sure the oven and cooktop are cool and the control knobs are in the off position.

To Replace:

1. Unplug range or disconnect power.

2. Turn the glass bulb cover in the back of the oven counterclockwise to remove.

3. Turn bulb counterclockwise to remove from socket.

4. Replace bulb, then bulb cover by turning clockwise.

5. Plug in range or reconnect power.

Convect Options

Convect Bake - Multiple-rack baking or cookies, biscuits, breads, casseroles, tarts, tortes, cakes.

Convect Roast - Whole chicken or turkey, vegetables, pork roasts, beef roasts.

Convect Broil - Thicker cuts or unevenly shaped pieces of meat, fish or poultry.

Clean Cycle

( Aquo ,ift '

Self-Cleaning

Technology

AquaLift ®Technology is an innovative cleaning solution that utilizes heat and water to release baked-on spills from the oven in less

than 1 hour. This new cleaning technology is a low-heat, odor-free alternative to traditional self-cleaning options.

Allow the oven to cool to room temperature before using the Clean cycle. If your oven cavity is above 200°F (93°C), "Oven Cooling" will appear in the display, and the Clean cycle will not be activated until the oven cavity cools down.

To Clean:

1. Remove all racks and accessories from the oven cavity and wipe excess soil. Use a plastic scraper to remove easily-

removed soils.

Remove the residual water and loosened soils with a sponge or cloth immediately after the Clean cycle is complete. Much of the initial 1s/4cups (14 oz [414 mL]) of water will remain in the oven after the cycle is completed. If additional soils

remain, leave a small amount of water in the oven bottom to assist with the cleaning.

If any soils remain, remove them with a non-scratch scrubbing sponge or plastic scraper. Additional Clean cycles may be run to help remove the stubborn soils.

IMPORTANT: Do not use oven cleaners. The use of chemicals, including commercial oven cleaners or metal

scouring pads, may cause permanent damage to the porcelain surface of the oven interior.

Pour 1s/4cups (14 oz [414 mL]) of distilled or filtered water onto the bottom of the empty oven and close the oven door.

IMPORTANT: Do not use chemicals or other additives with the water. Do not open the oven door during the Clean cycle. The

water on the oven bottom is hot.

3. Press AQUALIFT SELF CLEAN and then START on the oven control panel.

4. Allow 40 minutes for cleaning and cool down. A beep will sound when the Clean cycle is complete.

5. Press CANCEL at the end of the cycle. Cancel may be pressed at any time to stop the Clean cycle.

NOTES:

• The range should be level to ensure that the entire surface of the bottom of the oven cavity is covered by water at the beginning of the Clean cycle.

• For best results, use distilled or filtered water. Tap water may leave mineral deposits on the oven bottom.

• Before removing the residual water and loosened soils at the end of the Clean cycle, insert a cloth or paper towel between the lower edge of the oven door and the front frame to keep water from spilling onto the front of the range and the floor.

• Soil baked on through several cooking cycles will be more difficult to remove with the Clean cycle.

• Nonabrasive scrub sponges or eraser style cleaning pads (without cleaners) can be effective for cleaning the oven cavity walls, oven door and oven bottom for difficult soils. For best results, moisten the pads and sponges before use.

• Run an additional Clean cycle for stubborn soils.

• affresh ®Kitchen Appliance Cleaner and affresh ®Cooktop Cleaner may be used to clean the oven bottom, walls and door when the oven has finished the cycle and returned to room temperature. If affresh ®Cooktop Cleaner is used, it is recommended to wipe out the cavity with distilled water as

well. Refer to the "Accessories" section for information on ordering.

• Additional AquaLift ®Technology Cleaning Kits may be obtained by ordering Part Number W10423113RP. See the

"Accessories" section for more information.

• For assistance with AquaLift ®Technology, call

1-877-258-0808 in the U.S.A. or 1-800-807-6777 in Canada, or

visit our website at http:llwhr.pllaqualift.

+ 33 hidden pages