Jenn-Air JEF3115GS User Manual
JENN-AIR® DETAILED PLANNING DIMENSIONS
A
B
D*
A
B
C
D*
F
E
15" MODULAR ELECTRIC GRIDDLE
JEF3115G – 15" x 513⁄32" x 21"
PRODUCT DIMENSIONS
1 of 2
TOP VIEW
A
MODEL # JEF3115G
in cm
Overall width 15 38.1
A
Overall depth 21 53.3
B
Center of cooktop to center of
C
electrical conduit
Width of cooktop base 1419⁄64 36.3
B
F
E
D*
Height from electrical conduit to
E
underside of cooktop
Thickness of cooktop surface 11⁄4 3.2
F
Height from underside of cooktop base
G
to top of control knob
Depth of cooktop base 2019⁄64 51.6
H
Height of cooktop base 41⁄4 10.8
I
Height from bottom of electrical
J
conduit to underside of cooktop base
* Measured from tab to tab. Tabs should not be bent during installation.
539⁄64 14.2
513⁄32 13.7
51⁄2 14.0
11⁄4 3.2
FRONT VIEW
G
SIDE VIEW
C
B
I
H
J
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
89 97A dZ w217
JENN-AIR® DETAILED PLANNING DIMENSIONS
D* G
E
A
B
B
C
e
F
Side
Cabinet
G
Side
Cabinet
H
15" MODULAR ELECTRIC GRIDDLE
JEF3115G – 15" x 513⁄32" x 21"
OPENING/CLEARANCE DIMENSIONS
MODEL # JEF3115G
Width of combustible area above
A
cooking surface (min.)
Width from cooktop to fixed wall or
B
other combustible material (min.)
Width to outer edge of outlet (max.) 9 23.0
C
Height to bottom of uncovered wood or
D*
metal cabinet above cooking surface (min.)
Height to bottom of uncovered wood or
E
metal cabinet (min.)
Height to top edge of outlet (min.) 7 17.8
F
Depth of upper cabinet 13 33.0
G
Depth from cutout to wall (min.) 25⁄8 6.7
H
Width of cutout (recommended) 143⁄8 36.5
I
Depth of cutout (recommended) 203⁄8 51. 8
J
Depth from cutout to front of countertop 25⁄16 5.9
K
e
Recommended electrical access location
* Dimension can be reduced by 6" (15.2 cm) when bottom of wood or metal
cabinet is covered by not less than 1⁄4" (0.6 cm) flame retardant millboard
covered with not less than No. 28 MSG sheet metal, 0.015" (0.4 mm)
stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
If installing a hood or microwave hood combination above the cooktop,
follow the hood or microwave hood combination instructions for
dimensional clearances above the cooking surface.
B
FRONT VIEW
A
D*
E
B
F
e
C
2 of 2
in cm
15 38 .1
6 15. 2
30 76.2
18 45.7
Side
Cabinet
G
ELECTRICAL REQUIREMENTS
A 240 Volt, 60 Hz, AC only 15-amp fused, grounded electrical circuit is
required. A time-delayed fuse or dedicated circuit is recommended.
A grounded 3-prong outlet should be located in the back of the cabinet.
Do not use an extension cord.
LOCATION REQUIREMENTS
• To ensure cooktop base clearance, cabinet side walls need to be wider
than the cutout
• If cabinet has a drawer, allow a 51⁄2" (14.0 cm) minimum clearance
between countertop and top of drawer.
H
I
H
J
K
TOP VIEWSIDE VIEW
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation Guide before
selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
89 97A dZ w217
Loading...