Jenn-Air JED8130ADW, JED8130ADB User Manual
ELECTRIC DOWNDRAFT COOKTOP
PRODUCT DIMENSIONS
P
G
Q
INCHES CENTIMETERS
A 29 1/16 73 .7 .2
B 21 1/16 53.3 .2
C 9 3/8 23 .8
D 7 9/16 19.2
F 13 33 .0
G 1 7/8 mi n 4. 8 mi n
A
B
C
H 13 13/16 min 34 .8 m in
J 13 3/4 34 .9
D
F
K 11 13/16 30 .0
L2 2 min 5.1 m in
M 3 1/2 8.9
N3 6 1/4 mi n 15.9 min
P 30 76.2
Q 21 3/4 55.2
MODEL SKUs
4
M
JED8130ADB
JED
8130ADW
N
H
K
L
J
Style of product may vary from picture
NOTES:
1. Where possible, 6" (15.2 cm) is recommended for motor blower service. Minimum clearance of 1" (2.5 cm)
is required to sidewalls and 3/4" (
2. Provide 2" minimum (5
3. Provide 6
Installed dimension for (supplied) grease container(s) is 5
4. Grills installed near a side wall must allow a minimum clearance of 6" (
for maximum performance.
5. Vents up to 60 equivalent feet.
6. This appliance has been designed in accordance with the requirements of various safety agencies and comply
with the maximum allowable wood cabinet temperatures of
that have a lower working temperature than
1/4" minimum (15.9 cm) required for removal of (supplied) grease container(s).
.1 cm) cabinet clearance to motor for cooling purpose.
1.9cm) to rear wall.
1/2" (14.0 cm)
15.2 cm) between cooktop and side wall
194˚ F. If these appliances are installed with cabinets
194˚ F, discoloration, delamination or melting may occur.
Electrical requirements: Provide for
and wired according to local electrical codes.
Important: Because of continuing product improvements, Jenn-Air® reserves the right to change specifications without notice. Dimensional specifications are provided for
planning purposes only. For complete details see installation instructions that accompany each product before selecting cabinetry, making cutouts or beginning installation.
120/240 or 120/208 VAC, 60 Hz. The unit must be properly circuitprotected
Loading...