JENN-AIR JED4536GS, JED4536KS Dimension Guide
JENN-AIR® DETAILED PLANNING DIMENSIONS
A
B
L
I
E
K
B
1 of 4
36" JX3™ ELECTRIC RADIANT DOWNDRAFT COOKTOP WITH ELECTRONIC TOUCH CONTROL
JED4536G – 365⁄16" x 1759⁄64" x 23"
PRODUCT DIMENSIONS
TOP VIEW
E
A
MODEL # JED4536G
in cm
Overall width
Euro-Style Stainless 365⁄16 92.3
A
B
Floating Glass 365⁄16 92.3
Overall depth
Euro-Style Stainless 23 58.5
B
Floating Glass 221⁄16 56.0
Width of cooktop base 341⁄4 87.0
C
Width of assembled blower motor and plenum 1429⁄64 36.7
D
Height from blower motor to underside
E
of cooktop
Width from left side of cooktop base to
F
blower motor
A
C
J
H
I
F
Width from plenum to right side of cooktop base 1113⁄16 30.0
G
Height of cooktop base 33⁄4 9.5
H
Height from electrical housing to underside
I
of cooktop
Thickness of cooktop surface
J
Depth of cooktop base 2053⁄64 52.9
K
Height from plenum to underside of cooktop 1627⁄64 41.7
L
1759⁄64 45.5
8 20.3
71⁄8 18.1
1
⁄4 0.6
FRONT VIEW
D
G
B
K
I
L
E
SIDE VIEW
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide
before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8986AdZw217
JENN-AIR® DETAILED PLANNING DIMENSIONS
Side
Cabinet
J
K
Side
Cabinet
E*
J
F
D
e
A
B
B
v
C
I**
K
H
v
G
C
2 of 4
36" JX3™ ELECTRIC RADIANT DOWNDRAFT COOKTOP WITH ELECTRONIC TOUCH CONTROL
JED4536G – 365⁄16" x 1759⁄64" x 23"
OPENING/CLEARANCE DIMENSIONS
A
E*
B
H
e
D
I**
FRONT VIEW
C
C
Side
Cabinet
J
G
v
v
K
MODEL # JED4536G
in cm
Width of combustible area above
A
cooking surface (min.)
Width from cooktop to fixed wall
B
or other combustible material (min.)
Width to center of vent opening option (min.)
C
Width to outer edge of outlet (min.)
D
Height to bottom of uncovered wood or
E*
metal cabinet above cooking surface (min.)
Height to bottom of uncovered wood
F
F
B
or metal cabinet (min.)
Height to center of vent opening option
G
Height to top edge of outlet (min.)
H
Depth to center of vent opening option
I**
Depth of upper cabinet (recommended)
J
Depth from cutout to wall (min.)
K
Width of cutout
L
Depth of cutout
M
Depth from cutout to front of countertop (min.)
N
e
Recommended electrical access location
Recommended venting location –
v
see page 3-4 for ducting information
* Dimension can be reduced by 6" (15.2 cm) when bottom of wood or metal cabinet
is covered by not less than 1⁄4" (0.6 cm) flame retardant millboard covered with not
less than No. 28 MSG sheet metal, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm)
aluminum or 0.020" (0.5 mm) copper.
** Based on installation in a 24" (61.0 cm) deep by 341⁄2" (87.6 cm) high base
cabinet with a 11⁄2" (3.8 cm) thick counter top.
36 91.4
21⁄2 6.4
1411⁄16 37.3
10 25.4
30 76.2
18 45.7
1313⁄16 35.1
12 30.5
1617⁄64 41.3
13 33.0
11⁄2 3.8
349⁄16 87.8
211⁄8 53.7
2 5.1
ELECTRICAL REQUIREMENTS
220 volt, 60 Hz, AC only, 40-amp fused, electrical circuit is required. A dedicated
circuit is recommended.
VENTING REQUIREMENTS
This cooktop must be exhausted outdoors unless using the duct-free filter kit
(JDA7000WX). Refer to kit instructions for further information.
LOCATION REQUIREMENTS
• To ensure cooktop base clearance, cabinet side walls need to be wider than the cutout.
• A minimum clearance of 6" (15.2 cm) is recommended between the side of the
cooktop and side wall for maximum ventilation performance.
• A minimum clearance of 2" (5.1 cm) is recommended between the blower motor
and cabinet for proper cooling. A 6" (15.2 cm) clearance is recommended for
servicing access.
• An under counter built-in oven cannot be installed under this cooktop.
L
K
M
SIDE VIEW TOP VIEW – CUTOUT
N
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide
before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8986AdZw217
Loading...